diff options
Diffstat (limited to 'arch/arm')
58 files changed, 2608 insertions, 282 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d56d21c0573b..5ecaec63a47b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -738,6 +738,7 @@ config ARCH_S5PV310 select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK + select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 7e03f0ae2fc8..1c98d2ff2ed6 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -695,7 +695,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "audio-bus", - .id = -1, /* There's only one IISv4 port */ + .id = 2, .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, .enable = s3c64xx_sclk_ctrl, }, diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c index 76426a32c013..7618627b98f5 100644 --- a/arch/arm/mach-s3c64xx/dev-audio.c +++ b/arch/arm/mach-s3c64xx/dev-audio.c @@ -22,7 +22,12 @@ #include <plat/audio.h> #include <plat/gpio-cfg.h> -static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) +static const char *rclksrc[] = { + [0] = "iis", + [1] = "audio-bus", +}; + +static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev) { unsigned int base; @@ -33,6 +38,12 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) case 1: base = S3C64XX_GPE(0); break; + case 2: + s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5)); + return 0; default: printk(KERN_DEBUG "Invalid I2S Controller number: %d\n", pdev->id); @@ -44,16 +55,6 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev) return 0; } -static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev) -{ - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5)); - - return 0; -} - static struct resource s3c64xx_iis0_resource[] = { [0] = { .start = S3C64XX_PA_IIS0, @@ -72,17 +73,22 @@ static struct resource s3c64xx_iis0_resource[] = { }, }; -static struct s3c_audio_pdata s3c_i2s0_pdata = { - .cfg_gpio = s3c64xx_i2sv3_cfg_gpio, +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = s3c64xx_i2s_cfg_gpio, + .type = { + .i2s = { + .src_clk = rclksrc, + }, + }, }; struct platform_device s3c64xx_device_iis0 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 0, .num_resources = ARRAY_SIZE(s3c64xx_iis0_resource), .resource = s3c64xx_iis0_resource, .dev = { - .platform_data = &s3c_i2s0_pdata, + .platform_data = &i2sv3_pdata, }, }; EXPORT_SYMBOL(s3c64xx_device_iis0); @@ -105,17 +111,13 @@ static struct resource s3c64xx_iis1_resource[] = { }, }; -static struct s3c_audio_pdata s3c_i2s1_pdata = { - .cfg_gpio = s3c64xx_i2sv3_cfg_gpio, -}; - struct platform_device s3c64xx_device_iis1 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 1, .num_resources = ARRAY_SIZE(s3c64xx_iis1_resource), .resource = s3c64xx_iis1_resource, .dev = { - .platform_data = &s3c_i2s1_pdata, + .platform_data = &i2sv3_pdata, }, }; EXPORT_SYMBOL(s3c64xx_device_iis1); @@ -138,17 +140,23 @@ static struct resource s3c64xx_iisv4_resource[] = { }, }; -static struct s3c_audio_pdata s3c_i2sv4_pdata = { - .cfg_gpio = s3c64xx_i2sv4_cfg_gpio, +static struct s3c_audio_pdata i2sv4_pdata = { + .cfg_gpio = s3c64xx_i2s_cfg_gpio, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN, + .src_clk = rclksrc, + }, + }, }; struct platform_device s3c64xx_device_iisv4 = { - .name = "s3c64xx-iis-v4", - .id = -1, + .name = "samsung-i2s", + .id = 2, .num_resources = ARRAY_SIZE(s3c64xx_iisv4_resource), .resource = s3c64xx_iisv4_resource, .dev = { - .platform_data = &s3c_i2sv4_pdata, + .platform_data = &i2sv4_pdata, }, }; EXPORT_SYMBOL(s3c64xx_device_iisv4); diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c index 3462197ff352..8719dc41fe32 100644 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ b/arch/arm/mach-s5p6442/dev-audio.c @@ -29,7 +29,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev) base = S5P6442_GPC1(0); break; - case -1: + case 0: base = S5P6442_GPC0(0); break; @@ -42,8 +42,19 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev) return 0; } -static struct s3c_audio_pdata s3c_i2s_pdata = { +static const char *rclksrc_v35[] = { + [0] = "busclk", + [1] = "i2sclk", +}; + +static struct s3c_audio_pdata i2sv35_pdata = { .cfg_gpio = s5p6442_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, + .src_clk = rclksrc_v35, + }, + }, }; static struct resource s5p6442_iis0_resource[] = { @@ -62,15 +73,34 @@ static struct resource s5p6442_iis0_resource[] = { .end = DMACH_I2S0_RX, .flags = IORESOURCE_DMA, }, + [3] = { + .start = DMACH_I2S0S_TX, + .end = DMACH_I2S0S_TX, + .flags = IORESOURCE_DMA, + }, }; struct platform_device s5p6442_device_iis0 = { - .name = "s3c64xx-iis-v4", - .id = -1, + .name = "samsung-i2s", + .id = 0, .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), .resource = s5p6442_iis0_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv35_pdata, + }, +}; + +static const char *rclksrc_v3[] = { + [0] = "iis", + [1] = "sclk_audio", +}; + +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = s5p6442_cfg_i2s, + .type = { + .i2s = { + .src_clk = rclksrc_v3, + }, }, }; @@ -93,12 +123,12 @@ static struct resource s5p6442_iis1_resource[] = { }; struct platform_device s5p6442_device_iis1 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 1, .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), .resource = s5p6442_iis1_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv3_pdata, }, }; diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 31fb2e68d527..203dd5a18bd5 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -28,6 +28,9 @@ #define S5P6442_PA_VIC1 (0xE4100000) #define S5P6442_PA_VIC2 (0xE4200000) +#define S5P6442_PA_SROMC (0xE7000000) +#define S5P_PA_SROMC S5P6442_PA_SROMC + #define S5P6442_PA_MDMA 0xE8000000 #define S5P6442_PA_PDMA 0xE9000000 diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c index 819fd80d00af..e69f137b0a39 100644 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ b/arch/arm/mach-s5p6442/mach-smdk6442.c @@ -12,6 +12,7 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/serial_core.h> +#include <linux/i2c.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -25,6 +26,7 @@ #include <plat/s5p6442.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/iic.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -65,10 +67,15 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { }; static struct platform_device *smdk6442_devices[] __initdata = { + &s3c_device_i2c0, &s5p6442_device_iis0, &s3c_device_wdt, }; +static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("wm8580", 0x1b), }, +}; + static void __init smdk6442_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -78,6 +85,9 @@ static void __init smdk6442_map_io(void) static void __init smdk6442_machine_init(void) { + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, smdk6442_i2c_devs0, + ARRAY_SIZE(smdk6442_i2c_devs0)); platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); } diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c index 662695dd7761..aad85656b0cc 100644 --- a/arch/arm/mach-s5p6442/setup-i2c0.c +++ b/arch/arm/mach-s5p6442/setup-i2c0.c @@ -14,12 +14,15 @@ #include <linux/kernel.h> #include <linux/types.h> +#include <linux/gpio.h> struct platform_device; /* don't need the contents */ +#include <plat/gpio-cfg.h> #include <plat/iic.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - /* Will be populated later */ + s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index 2655829e6bf8..ae6bf6feba89 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -12,9 +12,9 @@ obj- := # Core support for S5P64X0 system -obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o -obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o gpio.o +obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o # machine support diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index e4883dc1c8d7..40137c6f0488 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -261,7 +261,7 @@ static struct clk init_clocks_disable[] = { .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 25), }, { - .name = "i2s_v40", + .name = "iis", .id = 0, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, @@ -419,7 +419,7 @@ static struct clksrc_sources clkset_audio = { static struct clksrc_clk clksrcs[] = { { .clk = { - .name = "mmc_bus", + .name = "sclk_mmc", .id = 0, .ctrlbit = (1 << 24), .enable = s5p64x0_sclk_ctrl, @@ -429,7 +429,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 }, }, { .clk = { - .name = "mmc_bus", + .name = "sclk_mmc", .id = 1, .ctrlbit = (1 << 25), .enable = s5p64x0_sclk_ctrl, @@ -439,7 +439,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 }, }, { .clk = { - .name = "mmc_bus", + .name = "sclk_mmc", .id = 2, .ctrlbit = (1 << 26), .enable = s5p64x0_sclk_ctrl, diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index 7dbf3c968f53..3f5ac93c455e 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -231,6 +231,12 @@ static struct clk init_clocks_disable[] = { .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 5), }, { + .name = "rtc", + .id = -1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 6), + }, { .name = "adc", .id = -1, .parent = &clk_pclk_low.clk, @@ -256,11 +262,23 @@ static struct clk init_clocks_disable[] = { .ctrlbit = (1 << 22), }, { .name = "iis", - .id = -1, + .id = 0, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 26), }, { + .name = "iis", + .id = 1, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "iis", + .id = 2, + .parent = &clk_pclk_low.clk, + .enable = s5p64x0_pclk_ctrl, + .ctrlbit = (1 << 16), + }, { .name = "i2c", .id = 1, .parent = &clk_pclk_low.clk, diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c index 396bacc0a39a..35f1f226dabb 100644 --- a/arch/arm/mach-s5p64x0/dev-audio.c +++ b/arch/arm/mach-s5p64x0/dev-audio.c @@ -19,15 +19,19 @@ #include <mach/dma.h> #include <mach/irqs.h> +static const char *rclksrc[] = { + [0] = "iis", + [1] = "sclk_audio2", +}; + static int s5p6440_cfg_i2s(struct platform_device *pdev) { - /* configure GPIO for i2s port */ switch (pdev->id) { - case -1: - s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5)); - s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5)); + case 0: + s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5)); break; - default: printk(KERN_ERR "Invalid Device %d\n", pdev->id); return -EINVAL; @@ -36,17 +40,58 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev) return 0; } +static struct s3c_audio_pdata s5p6440_i2s_pdata = { + .cfg_gpio = s5p6440_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN, + .src_clk = rclksrc, + }, + }, +}; + +static struct resource s5p64x0_i2s0_resource[] = { + [0] = { + .start = S5P64X0_PA_I2S, + .end = S5P64X0_PA_I2S + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_iis = { + .name = "samsung-i2s", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource), + .resource = s5p64x0_i2s0_resource, + .dev = { + .platform_data = &s5p6440_i2s_pdata, + }, +}; + static int s5p6450_cfg_i2s(struct platform_device *pdev) { - /* configure GPIO for i2s port */ switch (pdev->id) { - case -1: - s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5)); + case 0: s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5)); s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5)); - break; - + case 1: + s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5)); + break; + case 2: + s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5)); + break; default: printk(KERN_ERR "Invalid Device %d\n", pdev->id); return -EINVAL; @@ -55,47 +100,86 @@ static int s5p6450_cfg_i2s(struct platform_device *pdev) return 0; } -static struct s3c_audio_pdata s5p6440_i2s_pdata = { - .cfg_gpio = s5p6440_cfg_i2s, +static struct s3c_audio_pdata s5p6450_i2s0_pdata = { + .cfg_gpio = s5p6450_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN, + .src_clk = rclksrc, + }, + }, +}; + +struct platform_device s5p6450_device_iis0 = { + .name = "samsung-i2s", + .id = 0, + .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource), + .resource = s5p64x0_i2s0_resource, + .dev = { + .platform_data = &s5p6450_i2s0_pdata, + }, }; static struct s3c_audio_pdata s5p6450_i2s_pdata = { .cfg_gpio = s5p6450_cfg_i2s, + .type = { + .i2s = { + .src_clk = rclksrc, + }, + }, }; -static struct resource s5p64x0_iis0_resource[] = { +static struct resource s5p6450_i2s1_resource[] = { [0] = { - .start = S5P64X0_PA_I2S, - .end = S5P64X0_PA_I2S + 0x100 - 1, + .start = S5P6450_PA_I2S1, + .end = S5P6450_PA_I2S1 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, .flags = IORESOURCE_DMA, }, [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, .flags = IORESOURCE_DMA, }, }; -struct platform_device s5p6440_device_iis = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), - .resource = s5p64x0_iis0_resource, +struct platform_device s5p6450_device_iis1 = { + .name = "samsung-i2s", + .id = 1, + .num_resources = ARRAY_SIZE(s5p6450_i2s1_resource), + .resource = s5p6450_i2s1_resource, .dev = { - .platform_data = &s5p6440_i2s_pdata, + .platform_data = &s5p6450_i2s_pdata, }, }; -struct platform_device s5p6450_device_iis0 = { - .name = "s3c64xx-iis-v4", - .id = -1, - .num_resources = ARRAY_SIZE(s5p64x0_iis0_resource), - .resource = s5p64x0_iis0_resource, +static struct resource s5p6450_i2s2_resource[] = { + [0] = { + .start = S5P6450_PA_I2S2, + .end = S5P6450_PA_I2S2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6450_device_iis2 = { + .name = "samsung-i2s", + .id = 2, + .num_resources = ARRAY_SIZE(s5p6450_i2s2_resource), + .resource = s5p6450_i2s2_resource, .dev = { .platform_data = &s5p6450_i2s_pdata, }, diff --git a/arch/arm/mach-s5p64x0/gpio.c b/arch/arm/mach-s5p64x0/gpiolib.c index 39159dd5a29a..e7fb3b004e77 100644 --- a/arch/arm/mach-s5p64x0/gpio.c +++ b/arch/arm/mach-s5p64x0/gpiolib.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5p64x0/gpio.c +/* linux/arch/arm/mach-s5p64x0/gpiolib.c * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -17,13 +17,12 @@ #include <mach/map.h> #include <mach/regs-gpio.h> +#include <mach/regs-clock.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -/* To be implemented S5P6450 GPIO */ - /* * S5P6440 GPIO bank summary: * @@ -40,6 +39,25 @@ * P 8 2Bit Yes 8 * R 15 4Bit[2] Yes 8 * + * S5P6450 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 8 4Bit Yes None + * F 2 2Bit Yes None + * G 14 4Bit[2] Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 5 4Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 11 2Bit Yes 8 + * Q 14 2Bit Yes None + * R 15 4Bit[2] Yes None + * S 8 2Bit Yes None + * * [1] BANKF pins 14,15 do not form part of the external interrupt sources * [2] BANK has two control registers, GPxCON0 and GPxCON1 */ @@ -190,7 +208,7 @@ static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = { static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { { - .base = S5P6440_GPA_BASE, + .base = S5P64X0_GPA_BASE, .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPA(0), @@ -198,7 +216,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { .label = "GPA", }, }, { - .base = S5P6440_GPB_BASE, + .base = S5P64X0_GPB_BASE, .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPB(0), @@ -206,7 +224,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { .label = "GPB", }, }, { - .base = S5P6440_GPC_BASE, + .base = S5P64X0_GPC_BASE, .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPC(0), @@ -214,7 +232,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { .label = "GPC", }, }, { - .base = S5P6440_GPG_BASE, + .base = S5P64X0_GPG_BASE, .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPG(0), @@ -226,7 +244,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit[] = { static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { { - .base = S5P6440_GPH_BASE + 0x4, + .base = S5P64X0_GPH_BASE + 0x4, .config = &s5p64x0_gpio_cfgs[1], .chip = { .base = S5P6440_GPH(0), @@ -238,7 +256,7 @@ static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = { static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { { - .base = S5P6440_GPR_BASE + 0x4, + .base = S5P64X0_GPR_BASE + 0x4, .config = &s5p64x0_gpio_cfgs[2], .chip = { .base = S5P6440_GPR(0), @@ -250,7 +268,7 @@ static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = { static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { { - .base = S5P6440_GPF_BASE, + .base = S5P64X0_GPF_BASE, .config = &s5p64x0_gpio_cfgs[5], .chip = { .base = S5P6440_GPF(0), @@ -258,7 +276,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { .label = "GPF", }, }, { - .base = S5P6440_GPI_BASE, + .base = S5P64X0_GPI_BASE, .config = &s5p64x0_gpio_cfgs[3], .chip = { .base = S5P6440_GPI(0), @@ -266,7 +284,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { .label = "GPI", }, }, { - .base = S5P6440_GPJ_BASE, + .base = S5P64X0_GPJ_BASE, .config = &s5p64x0_gpio_cfgs[3], .chip = { .base = S5P6440_GPJ(0), @@ -274,7 +292,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { .label = "GPJ", }, }, { - .base = S5P6440_GPN_BASE, + .base = S5P64X0_GPN_BASE, .config = &s5p64x0_gpio_cfgs[4], .chip = { .base = S5P6440_GPN(0), @@ -282,7 +300,7 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { .label = "GPN", }, }, { - .base = S5P6440_GPP_BASE, + .base = S5P64X0_GPP_BASE, .config = &s5p64x0_gpio_cfgs[5], .chip = { .base = S5P6440_GPP(0), @@ -292,6 +310,142 @@ static struct s3c_gpio_chip s5p6440_gpio_2bit[] = { }, }; +static struct s3c_gpio_chip s5p6450_gpio_4bit[] = { + { + .base = S5P64X0_GPA_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPA(0), + .ngpio = S5P6450_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S5P64X0_GPB_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPB(0), + .ngpio = S5P6450_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S5P64X0_GPC_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPC(0), + .ngpio = S5P6450_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P6450_GPD_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPD(0), + .ngpio = S5P6450_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5P6450_GPK_BASE, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPK(0), + .ngpio = S5P6450_GPIO_K_NR, + .label = "GPK", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = { + { + .base = S5P64X0_GPG_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPG(0), + .ngpio = S5P6450_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S5P64X0_GPH_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[1], + .chip = { + .base = S5P6450_GPH(0), + .ngpio = S5P6450_GPIO_H_NR, + .label = "GPH", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = { + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfgs[2], + .chip = { + .base = S5P6450_GPR(0), + .ngpio = S5P6450_GPIO_R_NR, + .label = "GPR", + }, + }, +}; + +static struct s3c_gpio_chip s5p6450_gpio_2bit[] = { + { + .base = S5P64X0_GPF_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPF(0), + .ngpio = S5P6450_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6450_GPI(0), + .ngpio = S5P6450_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &s5p64x0_gpio_cfgs[3], + .chip = { + .base = S5P6450_GPJ(0), + .ngpio = S5P6450_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPN(0), + .ngpio = S5P6450_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPP(0), + .ngpio = S5P6450_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S5P6450_GPQ_BASE, + .config = &s5p64x0_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPQ(0), + .ngpio = S5P6450_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S5P6450_GPS_BASE, + .config = &s5p64x0_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPS(0), + .ngpio = S5P6450_GPIO_S_NR, + .label = "GPS", + }, + }, +}; + void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) { for (; nr_chips > 0; nr_chips--, chipcfg++) { @@ -317,26 +471,41 @@ static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip, } } -static int __init s5p6440_gpiolib_init(void) +static int __init s5p64x0_gpiolib_init(void) { - struct s3c_gpio_chip *chips = s5p6440_gpio_2bit; - int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit); + unsigned int chipid; + + chipid = __raw_readl(S5P64X0_SYS_ID); s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs, ARRAY_SIZE(s5p64x0_gpio_cfgs)); - for (; nr_chips > 0; nr_chips--, chips++) - s3c_gpiolib_add(chips); + if ((chipid & 0xff000) == 0x50000) { + samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit, + ARRAY_SIZE(s5p6450_gpio_2bit)); + + samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit, + ARRAY_SIZE(s5p6450_gpio_4bit)); - samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, - ARRAY_SIZE(s5p6440_gpio_4bit)); + samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2, + ARRAY_SIZE(s5p6450_gpio_4bit2)); - samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, - ARRAY_SIZE(s5p6440_gpio_4bit2)); + s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6450_gpio_rbank_4bit2)); + } else { + samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit, + ARRAY_SIZE(s5p6440_gpio_2bit)); - s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, - ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); + samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit, + ARRAY_SIZE(s5p6440_gpio_4bit)); + + samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2, + ARRAY_SIZE(s5p6440_gpio_4bit2)); + + s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2, + ARRAY_SIZE(s5p6440_gpio_rbank_4bit2)); + } return 0; } -arch_initcall(s5p6440_gpiolib_init); +core_initcall(s5p64x0_gpiolib_init); diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index 31e534156e06..a9365e5ba614 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -29,6 +29,9 @@ #define S5P64X0_PA_VIC0 (0xE4000000) #define S5P64X0_PA_VIC1 (0xE4100000) +#define S5P64X0_PA_SROMC (0xE7000000) +#define S5P_PA_SROMC S5P64X0_PA_SROMC + #define S5P64X0_PA_PDMA (0xE9000000) #define S5P64X0_PA_TIMER (0xEA000000) @@ -63,6 +66,8 @@ #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) #define S5P64X0_PA_I2S (0xF2000000) +#define S5P6450_PA_I2S1 0xF2800000 +#define S5P6450_PA_I2S2 0xF2900000 #define S5P64X0_PA_PCM (0xF2100000) diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 85f448e20a8b..0953ef6b1c77 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -15,48 +15,23 @@ #include <mach/map.h> -/* Will be implemented S5P6442 GPIOlib */ - /* Base addresses for each of the banks */ -#define S5P6440_GPA_BASE (S5P_VA_GPIO + 0x0000) -#define S5P6440_GPB_BASE (S5P_VA_GPIO + 0x0020) -#define S5P6440_GPC_BASE (S5P_VA_GPIO + 0x0040) -#define S5P6440_GPF_BASE (S5P_VA_GPIO + 0x00A0) -#define S5P6440_GPG_BASE (S5P_VA_GPIO + 0x00C0) -#define S5P6440_GPH_BASE (S5P_VA_GPIO + 0x00E0) -#define S5P6440_GPI_BASE (S5P_VA_GPIO + 0x0100) -#define S5P6440_GPJ_BASE (S5P_VA_GPIO + 0x0120) -#define S5P6440_GPN_BASE (S5P_VA_GPIO + 0x0830) -#define S5P6440_GPP_BASE (S5P_VA_GPIO + 0x0160) -#define S5P6440_GPR_BASE (S5P_VA_GPIO + 0x0290) - -#define S5P6440_EINT0CON0 (S5P_VA_GPIO + 0x900) -#define S5P6440_EINT0FLTCON0 (S5P_VA_GPIO + 0x910) -#define S5P6440_EINT0FLTCON1 (S5P_VA_GPIO + 0x914) -#define S5P6440_EINT0MASK (S5P_VA_GPIO + 0x920) -#define S5P6440_EINT0PEND (S5P_VA_GPIO + 0x924) - -/* for LCD */ - -#define S5P6440_SPCON_LCD_SEL_RGB (1 << 0) -#define S5P6440_SPCON_LCD_SEL_MASK (3 << 0) - -/* - * These set of macros are not really useful for the - * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit) - */ - -#define S5P6440_GPIO_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S5P6440_GPIO_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S5P6440_GPIO_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -/* - * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit) - */ - -#define S5P6440_GPIO2_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S5P6440_GPIO2_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S5P6440_GPIO2_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) +#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000) +#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020) +#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040) +#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0) +#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0) +#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0) +#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100) +#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120) +#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830) +#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160) +#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290) + +#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060) +#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140) +#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) +#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 87c3f03c618c..e9802755daeb 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -117,6 +117,7 @@ static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = { static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index d609f5af2b98..b78f56292780 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -135,6 +135,7 @@ static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = { }; static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("wm8580", 0x1b), }, { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */ }; diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c index 564e195ec493..10ab275ebd63 100644 --- a/arch/arm/mach-s5pc100/dev-audio.c +++ b/arch/arm/mach-s5pc100/dev-audio.c @@ -23,17 +23,14 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev) { /* configure GPIO for i2s port */ switch (pdev->id) { + case 0: /* Dedicated pins */ + break; case 1: s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2)); break; - case 2: s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4)); break; - - case -1: /* Dedicated pins */ - break; - default: printk(KERN_ERR "Invalid Device %d\n", pdev->id); return -EINVAL; @@ -42,8 +39,20 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev) return 0; } -static struct s3c_audio_pdata s3c_i2s_pdata = { +static const char *rclksrc_v5[] = { + [0] = "iis", + [1] = "i2sclkd2", +}; + +static struct s3c_audio_pdata i2sv5_pdata = { .cfg_gpio = s5pc100_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI + | QUIRK_NEED_RSTCLR, + .src_clk = rclksrc_v5, + }, + }, }; static struct resource s5pc100_iis0_resource[] = { @@ -62,15 +71,34 @@ static struct resource s5pc100_iis0_resource[] = { .end = DMACH_I2S0_RX, .flags = IORESOURCE_DMA, }, + [3] = { + .start = DMACH_I2S0S_TX, + .end = DMACH_I2S0S_TX, + .flags = IORESOURCE_DMA, + }, }; struct platform_device s5pc100_device_iis0 = { - .name = "s3c64xx-iis-v4", - .id = -1, + .name = "samsung-i2s", + .id = 0, .num_resources = ARRAY_SIZE(s5pc100_iis0_resource), .resource = s5pc100_iis0_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv5_pdata, + }, +}; + +static const char *rclksrc_v3[] = { + [0] = "iis", + [1] = "sclk_audio", +}; + +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = s5pc100_cfg_i2s, + .type = { + .i2s = { + .src_clk = rclksrc_v3, + }, }, }; @@ -93,12 +121,12 @@ static struct resource s5pc100_iis1_resource[] = { }; struct platform_device s5pc100_device_iis1 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 1, .num_resources = ARRAY_SIZE(s5pc100_iis1_resource), .resource = s5pc100_iis1_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv3_pdata, }, }; @@ -121,12 +149,12 @@ static struct resource s5pc100_iis2_resource[] = { }; struct platform_device s5pc100_device_iis2 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 2, .num_resources = ARRAY_SIZE(s5pc100_iis2_resource), .resource = s5pc100_iis2_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv3_pdata, }, }; diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h index 32e9cab5c864..328467b346aa 100644 --- a/arch/arm/mach-s5pc100/include/mach/map.h +++ b/arch/arm/mach-s5pc100/include/mach/map.h @@ -55,6 +55,8 @@ #define S5PC100_VA_VIC_OFFSET 0x10000 #define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET)) +#define S5PC100_PA_SROMC (0xE7000000) +#define S5P_PA_SROMC S5PC100_PA_SROMC #define S5PC100_PA_ONENAND (0xE7100000) diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 862f239a0fdb..53aabef1e9ce 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -118,6 +118,7 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 + select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -130,6 +131,7 @@ config MACH_SMDKV210 select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_TS + select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_IDE diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 019c3a69b0e4..dab6ef3b6ca9 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -467,20 +467,20 @@ static struct clk init_clocks_disable[] = { .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<21), }, { - .name = "i2s_v50", + .name = "iis", .id = 0, .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<4), }, { - .name = "i2s_v32", - .id = 0, + .name = "iis", + .id = 1, .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 5), }, { - .name = "i2s_v32", - .id = 1, + .name = "iis", + .id = 2, .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 6), @@ -525,6 +525,12 @@ static struct clk init_clocks[] = { .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 20), + }, { + .name = "sromc", + .id = -1, + .parent = &clk_hclk_psys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 26), }, }; diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 8eb480e201b0..61e6c24b90ac 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -81,11 +81,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = { .length = SZ_512K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV210_PA_SROMC), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_DMC0, .pfn = __phys_to_pfn(S5PV210_PA_DMC0), .length = SZ_4K, diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 1303fcb12b51..ddd2704b3467 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -19,22 +19,24 @@ #include <mach/dma.h> #include <mach/irqs.h> +static const char *rclksrc[] = { + [0] = "busclk", + [1] = "i2sclk", +}; + static int s5pv210_cfg_i2s(struct platform_device *pdev) { /* configure GPIO for i2s port */ switch (pdev->id) { + case 0: + s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2)); + break; case 1: s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2)); break; - case 2: s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4)); break; - - case -1: - s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2)); - break; - default: printk(KERN_ERR "Invalid Device %d\n", pdev->id); return -EINVAL; @@ -43,8 +45,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev) return 0; } -static struct s3c_audio_pdata s3c_i2s_pdata = { +static struct s3c_audio_pdata i2sv5_pdata = { .cfg_gpio = s5pv210_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI + | QUIRK_NEED_RSTCLR, + .src_clk = rclksrc, + }, + }, }; static struct resource s5pv210_iis0_resource[] = { @@ -63,15 +72,34 @@ static struct resource s5pv210_iis0_resource[] = { .end = DMACH_I2S0_RX, .flags = IORESOURCE_DMA, }, + [3] = { + .start = DMACH_I2S0S_TX, + .end = DMACH_I2S0S_TX, + .flags = IORESOURCE_DMA, + }, }; struct platform_device s5pv210_device_iis0 = { - .name = "s3c64xx-iis-v4", - .id = -1, + .name = "samsung-i2s", + .id = 0, .num_resources = ARRAY_SIZE(s5pv210_iis0_resource), .resource = s5pv210_iis0_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv5_pdata, + }, +}; + +static const char *rclksrc_v3[] = { + [0] = "iis", + [1] = "audio-bus", +}; + +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = s5pv210_cfg_i2s, + .type = { + .i2s = { + .src_clk = rclksrc_v3, + }, }, }; @@ -94,12 +122,12 @@ static struct resource s5pv210_iis1_resource[] = { }; struct platform_device s5pv210_device_iis1 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 1, .num_resources = ARRAY_SIZE(s5pv210_iis1_resource), .resource = s5pv210_iis1_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv3_pdata, }, }; @@ -122,12 +150,12 @@ static struct resource s5pv210_iis2_resource[] = { }; struct platform_device s5pv210_device_iis2 = { - .name = "s3c64xx-iis", + .name = "samsung-i2s", .id = 2, .num_resources = ARRAY_SIZE(s5pv210_iis2_resource), .resource = s5pv210_iis2_resource, .dev = { - .platform_data = &s3c_i2s_pdata, + .platform_data = &i2sv3_pdata, }, }; diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 119b95fdc3ce..26710b35ef87 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -65,7 +65,7 @@ #define IRQ_HSMMC0 S5P_IRQ_VIC1(26) #define IRQ_HSMMC1 S5P_IRQ_VIC1(27) #define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_MIPICSI S5P_IRQ_VIC1(29) +#define IRQ_MIPI_CSIS S5P_IRQ_VIC1(29) #define IRQ_MIPIDSI S5P_IRQ_VIC1(30) #define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31) @@ -132,5 +132,6 @@ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 #define IRQ_LCD_SYSTEM IRQ_LCD2 +#define IRQ_MIPI_CSIS0 IRQ_MIPI_CSIS #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 861d7fe11fc9..3611492ad681 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -16,6 +16,8 @@ #include <plat/map-base.h> #include <plat/map-s5p.h> +#define S5PV210_PA_SROM_BANK5 (0xA8000000) + #define S5PC110_PA_ONENAND (0xB0000000) #define S5P_PA_ONENAND S5PC110_PA_ONENAND @@ -60,6 +62,7 @@ #define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET)) #define S5PV210_PA_SROMC (0xE8000000) +#define S5P_PA_SROMC S5PV210_PA_SROMC #define S5PV210_PA_CFCON (0xE8200000) @@ -107,6 +110,8 @@ #define S5PV210_PA_DMC0 (0xF0000000) #define S5PV210_PA_DMC1 (0xF1400000) +#define S5PV210_PA_MIPI_CSIS 0xFA600000 + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0) @@ -123,6 +128,7 @@ #define S5P_PA_FIMC0 S5PV210_PA_FIMC0 #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 +#define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS #define SAMSUNG_PA_ADC S5PV210_PA_ADC #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index ebaabe021af9..4c45b74def5f 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -161,7 +161,7 @@ #define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) -#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814) +#define S5P_MIPI_DPHY_CONTROL S5P_CLKREG(0xE814) #define S5P_IDLE_CFG_TL_MASK (3 << 30) #define S5P_IDLE_CFG_TM_MASK (3 << 28) @@ -195,9 +195,6 @@ #define S5P_OTHERS_RET_UART (1 << 28) #define S5P_OTHERS_USB_SIG_MASK (1 << 16) -/* MIPI */ -#define S5P_MIPI_DPHY_EN (3) - /* S5P_DAC_CONTROL */ #define S5P_DAC_ENABLE (1) #define S5P_DAC_DISABLE (0) diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 5dd1681c069e..bb20a14da100 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -94,6 +94,7 @@ static struct platform_device *smdkc110_devices[] __initdata = { static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = { diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 1fbc45b2a432..88e45223c8af 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -14,16 +14,25 @@ #include <linux/init.h> #include <linux/serial_core.h> #include <linux/sysdev.h> +#include <linux/dm9000.h> +#include <linux/fb.h> +#include <linux/gpio.h> +#include <linux/delay.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/setup.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> + #include <mach/map.h> #include <mach/regs-clock.h> +#include <mach/regs-fb.h> #include <plat/regs-serial.h> +#include <plat/regs-srom.h> +#include <plat/gpio-cfg.h> #include <plat/s5pv210.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -33,6 +42,7 @@ #include <plat/iic.h> #include <plat/keypad.h> #include <plat/pm.h> +#include <plat/fb.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -102,12 +112,106 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = { .cols = 8, }; +static struct resource smdkv210_dm9000_resources[] = { + [0] = { + .start = S5PV210_PA_SROM_BANK5, + .end = S5PV210_PA_SROM_BANK5, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S5PV210_PA_SROM_BANK5 + 2, + .end = S5PV210_PA_SROM_BANK5 + 2, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = IRQ_EINT(9), + .end = IRQ_EINT(9), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct dm9000_plat_data smdkv210_dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM, + .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 }, +}; + +struct platform_device smdkv210_dm9000 = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources), + .resource = smdkv210_dm9000_resources, + .dev = { + .platform_data = &smdkv210_dm9000_platdata, + }, +}; + +static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request(S5PV210_GPD0(3), "GPD0"); + gpio_direction_output(S5PV210_GPD0(3), 1); + gpio_free(S5PV210_GPD0(3)); +#endif + + /* fire nRESET on power up */ + gpio_request(S5PV210_GPH0(6), "GPH0"); + + gpio_direction_output(S5PV210_GPH0(6), 1); + + gpio_set_value(S5PV210_GPH0(6), 0); + mdelay(10); + + gpio_set_value(S5PV210_GPH0(6), 1); + mdelay(10); + + gpio_free(S5PV210_GPH0(6)); + } else { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request(S5PV210_GPD0(3), "GPD0"); + gpio_direction_output(S5PV210_GPD0(3), 0); + gpio_free(S5PV210_GPD0(3)); +#endif + } +} + +static struct plat_lcd_data smdkv210_lcd_lte480wv_data = { + .set_power = smdkv210_lte480wv_set_power, +}; + +static struct platform_device smdkv210_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdkv210_lcd_lte480wv_data, +}; + +static struct s3c_fb_pd_win smdkv210_fb_win0 = { + .win_mode = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { + .win[0] = &smdkv210_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5pv210_fb_gpio_setup_24bpp, +}; + static struct platform_device *smdkv210_devices[] __initdata = { - &s5pv210_device_iis0, - &s5pv210_device_ac97, - &s5pv210_device_spdif, &s3c_device_adc, &s3c_device_cfcon, + &s3c_device_fb, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -115,14 +219,37 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_i2c1, &s3c_device_i2c2, - &samsung_device_keypad, &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s5pv210_device_ac97, + &s5pv210_device_iis0, + &s5pv210_device_spdif, + &samsung_device_keypad, + &smdkv210_dm9000, + &smdkv210_lcd_lte480wv, }; +static void __init smdkv210_dm9000_init(void) +{ + unsigned int tmp; + + gpio_request(S5PV210_MP01(5), "nCS5"); + s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2)); + gpio_free(S5PV210_MP01(5)); + + tmp = (5 << S5P_SROM_BCX__TACC__SHIFT); + __raw_writel(tmp, S5P_SROM_BC5); + + tmp = __raw_readl(S5P_SROM_BW); + tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT); + tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT); + __raw_writel(tmp, S5P_SROM_BW); +} + static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */ + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = { @@ -150,6 +277,8 @@ static void __init smdkv210_machine_init(void) { s3c_pm_init(); + smdkv210_dm9000_init(); + samsung_keypad_set_platdata(&smdkv210_keypad_data); s3c24xx_ts_set_platdata(&s3c_ts_platform); @@ -165,6 +294,8 @@ static void __init smdkv210_machine_init(void) s3c_ide_set_platdata(&smdkv210_ide_pdata); + s3c_fb_set_platdata(&smdkv210_lcd0_pdata); + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig index 1150b360f38c..b7aa3cd2198a 100644 --- a/arch/arm/mach-s5pv310/Kconfig +++ b/arch/arm/mach-s5pv310/Kconfig @@ -11,9 +11,15 @@ if ARCH_S5PV310 config CPU_S5PV310 bool + select S3C_PL330_DMA help Enable S5PV310 CPU support +config S5PV310_DEV_PD + bool + help + Compile in platform device definitions for Power Domain + config S5PV310_SETUP_I2C1 bool help @@ -69,10 +75,13 @@ config MACH_SMDKC210 select CPU_S5PV310 select S3C_DEV_RTC select S3C_DEV_WDT + select S3C_DEV_I2C1 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select S5PV310_DEV_PD + select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help Machine support for Samsung SMDKC210 @@ -82,6 +91,10 @@ config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_S5PV310 select S5P_DEV_ONENAND + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S5PV310_SETUP_SDHCI select S3C_DEV_I2C1 select S5PV310_SETUP_I2C1 help @@ -97,10 +110,13 @@ config MACH_SMDKV310 select CPU_S5PV310 select S3C_DEV_RTC select S3C_DEV_WDT + select S3C_DEV_I2C1 select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select S5PV310_DEV_PD + select S5PV310_SETUP_I2C1 select S5PV310_SETUP_SDHCI help Machine support for Samsung SMDKV310 diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile index 84afc64e7c01..651f1933e228 100644 --- a/arch/arm/mach-s5pv310/Makefile +++ b/arch/arm/mach-s5pv310/Makefile @@ -13,7 +13,8 @@ obj- := # Core support for S5PV310 system obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o +obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o @@ -27,6 +28,9 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o # device support +obj-y += dev-audio.o +obj-$(CONFIG_S5PV310_DEV_PD) += dev-pd.o + obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c index 58c9d33f36fe..753fa4465876 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-s5pv310/clock.c @@ -244,7 +244,7 @@ static struct clksrc_clk clk_mout_corebus = { .id = -1, }, .sources = &clkset_mout_corebus, - .reg_src = { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 }, + .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, }; static struct clksrc_clk clk_sclk_dmc = { @@ -253,7 +253,7 @@ static struct clksrc_clk clk_sclk_dmc = { .id = -1, .parent = &clk_mout_corebus.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, }; static struct clksrc_clk clk_aclk_cored = { @@ -262,7 +262,7 @@ static struct clksrc_clk clk_aclk_cored = { .id = -1, .parent = &clk_sclk_dmc.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, }; static struct clksrc_clk clk_aclk_corep = { @@ -271,7 +271,7 @@ static struct clksrc_clk clk_aclk_corep = { .id = -1, .parent = &clk_aclk_cored.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, }; static struct clksrc_clk clk_aclk_acp = { @@ -280,7 +280,7 @@ static struct clksrc_clk clk_aclk_acp = { .id = -1, .parent = &clk_mout_corebus.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, }; static struct clksrc_clk clk_pclk_acp = { @@ -289,7 +289,7 @@ static struct clksrc_clk clk_pclk_acp = { .id = -1, .parent = &clk_aclk_acp.clk, }, - .reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 }, + .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, }; /* Core list of CMU_TOP side */ @@ -467,6 +467,16 @@ static struct clk init_clocks_disable[] = { .enable = s5pv310_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { + .name = "pdma", + .id = 0, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "pdma", + .id = 1, + .enable = s5pv310_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 1), + }, { .name = "adc", .id = -1, .enable = s5pv310_clk_ip_peril_ctrl, @@ -507,6 +517,26 @@ static struct clk init_clocks_disable[] = { .enable = s5pv310_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { + .name = "iis", + .id = 0, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 19), + }, { + .name = "iis", + .id = 1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 20), + }, { + .name = "iis", + .id = 2, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 21), + }, { + .name = "ac97", + .id = -1, + .enable = s5pv310_clk_ip_peril_ctrl, + .ctrlbit = (1 << 27), + }, { .name = "fimg2d", .id = -1, .enable = s5pv310_clk_ip_image_ctrl, @@ -990,6 +1020,17 @@ static struct clksrc_clk *sysclks[] = { &clk_dout_mmc4, }; +static int xtal_rate; + +static unsigned long s5pv310_fout_apll_get_rate(struct clk *clk) +{ + return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); +} + +static struct clk_ops s5pv310_fout_apll_ops = { + .get_rate = s5pv310_fout_apll_get_rate, +}; + void __init_or_cpufreq s5pv310_setup_clocks(void) { struct clk *xtal_clk; @@ -1013,6 +1054,9 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) BUG_ON(IS_ERR(xtal_clk)); xtal = clk_get_rate(xtal_clk); + + xtal_rate = xtal; + clk_put(xtal_clk); printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); @@ -1026,7 +1070,7 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), __raw_readl(S5P_VPLL_CON1), pll_4650); - clk_fout_apll.rate = apll; + clk_fout_apll.ops = &s5pv310_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; clk_fout_vpll.rate = vpll; diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c index 82ce4aa6d61a..72092db104c5 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-s5pv310/cpu.c @@ -43,6 +43,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_128K, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_PMU, + .pfn = __phys_to_pfn(S5PV310_PA_PMU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, .pfn = __phys_to_pfn(S5PV310_PA_COMBINER), .length = SZ_4K, @@ -73,6 +78,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .length = SZ_256, .type = MT_DEVICE, }, { + .virtual = (unsigned long)S5P_VA_DMC0, + .pfn = __phys_to_pfn(S5PV310_PA_DMC0), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S3C_VA_UART, .pfn = __phys_to_pfn(S3C_PA_UART), .length = SZ_512K, @@ -127,6 +137,15 @@ void __init s5pv310_init_irq(void) gic_cpu_init(0, S5P_VA_GIC_CPU); for (irq = 0; irq < MAX_COMBINER_NR; irq++) { + + /* + * From SPI(0) to SPI(39) and SPI(51), SPI(53) are + * connected to the interrupt combiner. These irqs + * should be initialized to support cascade interrupt. + */ + if ((irq >= 40) && !(irq == 51) && !(irq == 53)) + continue; + combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), COMBINER_IRQ(irq, 0)); combiner_cascade_irq(irq, IRQ_SPI(irq)); @@ -168,7 +187,7 @@ static int __init s5pv310_l2x0_cache_init(void) __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN, S5P_VA_L2CC + L2X0_POWER_CTRL); - l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff); + l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff); return 0; } diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-s5pv310/cpufreq.c new file mode 100644 index 000000000000..b04cbc731128 --- /dev/null +++ b/arch/arm/mach-s5pv310/cpufreq.c @@ -0,0 +1,580 @@ +/* linux/arch/arm/mach-s5pv310/cpufreq.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - CPU frequency scaling support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/cpufreq.h> + +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-mem.h> + +#include <plat/clock.h> +#include <plat/pm.h> + +static struct clk *cpu_clk; +static struct clk *moutcore; +static struct clk *mout_mpll; +static struct clk *mout_apll; + +#ifdef CONFIG_REGULATOR +static struct regulator *arm_regulator; +static struct regulator *int_regulator; +#endif + +static struct cpufreq_freqs freqs; +static unsigned int memtype; + +enum s5pv310_memory_type { + DDR2 = 4, + LPDDR2, + DDR3, +}; + +enum cpufreq_level_index { + L0, L1, L2, L3, CPUFREQ_LEVEL_END, +}; + +static struct cpufreq_frequency_table s5pv310_freq_table[] = { + {L0, 1000*1000}, + {L1, 800*1000}, + {L2, 400*1000}, + {L3, 100*1000}, + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = { + /* + * Clock divider value for following + * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, + * DIVATB, DIVPCLK_DBG, DIVAPLL } + */ + + /* ARM L0: 1000MHz */ + { 0, 3, 7, 3, 3, 0, 1 }, + + /* ARM L1: 800MHz */ + { 0, 3, 7, 3, 3, 0, 1 }, + + /* ARM L2: 400MHz */ + { 0, 1, 3, 1, 3, 0, 1 }, + + /* ARM L3: 100MHz */ + { 0, 0, 1, 0, 3, 1, 1 }, +}; + +static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVCOPY, DIVHPM } + */ + + /* ARM L0: 1000MHz */ + { 3, 0 }, + + /* ARM L1: 800MHz */ + { 3, 0 }, + + /* ARM L2: 400MHz */ + { 3, 0 }, + + /* ARM L3: 100MHz */ + { 3, 0 }, +}; + +static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = { + /* + * Clock divider value for following + * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD + * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } + */ + + /* DMC L0: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L1: 400MHz */ + { 3, 1, 1, 1, 1, 1, 3, 1 }, + + /* DMC L2: 266.7MHz */ + { 7, 1, 1, 2, 1, 1, 3, 1 }, + + /* DMC L3: 200MHz */ + { 7, 1, 1, 3, 1, 1, 3, 1 }, +}; + +static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = { + /* + * Clock divider value for following + * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } + */ + + /* ACLK200 L0: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L1: 200MHz */ + { 3, 7, 4, 5, 1 }, + + /* ACLK200 L2: 160MHz */ + { 4, 7, 5, 7, 1 }, + + /* ACLK200 L3: 133.3MHz */ + { 5, 7, 7, 7, 1 }, +}; + +static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = { + /* + * Clock divider value for following + * { DIVGDL/R, DIVGPL/R } + */ + + /* ACLK_GDL/R L0: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L1: 200MHz */ + { 3, 1 }, + + /* ACLK_GDL/R L2: 160MHz */ + { 4, 1 }, + + /* ACLK_GDL/R L3: 133.3MHz */ + { 5, 1 }, +}; + +struct cpufreq_voltage_table { + unsigned int index; /* any */ + unsigned int arm_volt; /* uV */ + unsigned int int_volt; +}; + +static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { + { + .index = L0, + .arm_volt = 1200000, + .int_volt = 1100000, + }, { + .index = L1, + .arm_volt = 1100000, + .int_volt = 1100000, + }, { + .index = L2, + .arm_volt = 1000000, + .int_volt = 1000000, + }, { + .index = L3, + .arm_volt = 900000, + .int_volt = 1000000, + }, +}; + +static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { + /* APLL FOUT L0: 1000MHz */ + ((250 << 16) | (6 << 8) | 1), + + /* APLL FOUT L1: 800MHz */ + ((200 << 16) | (6 << 8) | 1), + + /* APLL FOUT L2 : 400MHz */ + ((200 << 16) | (6 << 8) | 2), + + /* APLL FOUT L3: 100MHz */ + ((200 << 16) | (6 << 8) | 4), +}; + +int s5pv310_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); +} + +unsigned int s5pv310_getspeed(unsigned int cpu) +{ + return clk_get_rate(cpu_clk) / 1000; +} + +void s5pv310_set_clkdiv(unsigned int div_index) +{ + unsigned int tmp; + + /* Change Divider - CPU0 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU); + + tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | + S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | + S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | + S5P_CLKDIV_CPU0_APLL_MASK); + + tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | + (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | + (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | + (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | + (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | + (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | + (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_CPU); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU); + } while (tmp & 0x1111111); + + /* Change Divider - CPU1 */ + + tmp = __raw_readl(S5P_CLKDIV_CPU1); + + tmp &= ~((0x7 << 4) | 0x7); + + tmp |= ((clkdiv_cpu1[div_index][0] << 4) | + (clkdiv_cpu1[div_index][1] << 0)); + + __raw_writel(tmp, S5P_CLKDIV_CPU1); + + do { + tmp = __raw_readl(S5P_CLKDIV_STATCPU1); + } while (tmp & 0x11); + + /* Change Divider - DMC0 */ + + tmp = __raw_readl(S5P_CLKDIV_DMC0); + + tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | + S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | + S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | + S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); + + tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | + (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | + (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | + (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | + (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | + (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | + (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | + (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_DMC0); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); + } while (tmp & 0x11111111); + + /* Change Divider - TOP */ + + tmp = __raw_readl(S5P_CLKDIV_TOP); + + tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | + S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | + S5P_CLKDIV_TOP_ONENAND_MASK); + + tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | + (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | + (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | + (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | + (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_TOP); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); + } while (tmp & 0x11111); + + /* Change Divider - LEFTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); + } while (tmp & 0x11); + + /* Change Divider - RIGHTBUS */ + + tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); + + tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); + + tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | + (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); + + __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); + + do { + tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); + } while (tmp & 0x11); +} + +static void s5pv310_set_apll(unsigned int index) +{ + unsigned int tmp; + + /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ + clk_set_parent(moutcore, mout_mpll); + + do { + tmp = (__raw_readl(S5P_CLKMUX_STATCPU) + >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); + tmp &= 0x7; + } while (tmp != 0x2); + + /* 2. Set APLL Lock time */ + __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); + + /* 3. Change PLL PMS values */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); + tmp |= s5pv310_apll_pms_table[index]; + __raw_writel(tmp, S5P_APLL_CON0); + + /* 4. wait_lock_time */ + do { + tmp = __raw_readl(S5P_APLL_CON0); + } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); + + /* 5. MUX_CORE_SEL = APLL */ + clk_set_parent(moutcore, mout_apll); + + do { + tmp = __raw_readl(S5P_CLKMUX_STATCPU); + tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; + } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); +} + +static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index) +{ + unsigned int tmp; + + if (old_index > new_index) { + /* The frequency changing to L0 needs to change apll */ + if (freqs.new == s5pv310_freq_table[L0].frequency) { + /* 1. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + + /* 2. Change the apll m,p,s value */ + s5pv310_set_apll(new_index); + } else { + /* 1. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + + /* 2. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + } + } + + else if (old_index < new_index) { + /* The frequency changing from L0 needs to change apll */ + if (freqs.old == s5pv310_freq_table[L0].frequency) { + /* 1. Change the apll m,p,s value */ + s5pv310_set_apll(new_index); + + /* 2. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + } else { + /* 1. Change just s value in apll m,p,s value */ + tmp = __raw_readl(S5P_APLL_CON0); + tmp &= ~(0x7 << 0); + tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + __raw_writel(tmp, S5P_APLL_CON0); + + /* 2. Change the system clock divider values */ + s5pv310_set_clkdiv(new_index); + } + } +} + +static int s5pv310_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index, old_index; + unsigned int arm_volt, int_volt; + + freqs.old = s5pv310_getspeed(policy->cpu); + + if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + freqs.old, relation, &old_index)) + return -EINVAL; + + if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + freqs.new = s5pv310_freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.new == freqs.old) + return 0; + + /* get the voltage value */ + arm_volt = s5pv310_volt_table[index].arm_volt; + int_volt = s5pv310_volt_table[index].int_volt; + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + /* control regulator */ + if (freqs.new > freqs.old) { + /* Voltage up */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + /* Clock Configuration Procedure */ + s5pv310_set_frequency(old_index, index); + + /* control regulator */ + if (freqs.new < freqs.old) { + /* Voltage down */ +#ifdef CONFIG_REGULATOR + regulator_set_voltage(arm_regulator, arm_volt, arm_volt); + regulator_set_voltage(int_regulator, int_volt, int_volt); +#endif + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return 0; +} + +#ifdef CONFIG_PM +static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy, + pm_message_t pmsg) +{ + return 0; +} + +static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy) +{ + return 0; +} +#endif + +static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu); + + cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu); + + /* set the transition latency value */ + policy->cpuinfo.transition_latency = 100000; + + /* + * S5PV310 multi-core processors has 2 cores + * that the frequency cannot be set independently. + * Each cpu is bound to the same speed. + * So the affected cpu is all of the cpus. + */ + cpumask_setall(policy->cpus); + + return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table); +} + +static struct cpufreq_driver s5pv310_driver = { + .flags = CPUFREQ_STICKY, + .verify = s5pv310_verify_speed, + .target = s5pv310_target, + .get = s5pv310_getspeed, + .init = s5pv310_cpufreq_cpu_init, + .name = "s5pv310_cpufreq", +#ifdef CONFIG_PM + .suspend = s5pv310_cpufreq_suspend, + .resume = s5pv310_cpufreq_resume, +#endif +}; + +static int __init s5pv310_cpufreq_init(void) +{ + cpu_clk = clk_get(NULL, "armclk"); + if (IS_ERR(cpu_clk)) + return PTR_ERR(cpu_clk); + + moutcore = clk_get(NULL, "moutcore"); + if (IS_ERR(moutcore)) + goto out; + + mout_mpll = clk_get(NULL, "mout_mpll"); + if (IS_ERR(mout_mpll)) + goto out; + + mout_apll = clk_get(NULL, "mout_apll"); + if (IS_ERR(mout_apll)) + goto out; + +#ifdef CONFIG_REGULATOR + arm_regulator = regulator_get(NULL, "vdd_arm"); + if (IS_ERR(arm_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); + goto out; + } + + int_regulator = regulator_get(NULL, "vdd_int"); + if (IS_ERR(int_regulator)) { + printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); + goto out; + } +#endif + + /* + * Check DRAM type. + * Because DVFS level is different according to DRAM type. + */ + memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); + memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); + memtype &= S5P_DMC0_MEMTYPE_MASK; + + if ((memtype < DDR2) && (memtype > DDR3)) { + printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); + goto out; + } else { + printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); + } + + return cpufreq_register_driver(&s5pv310_driver); + +out: + if (!IS_ERR(cpu_clk)) + clk_put(cpu_clk); + + if (!IS_ERR(moutcore)) + clk_put(moutcore); + + if (!IS_ERR(mout_mpll)) + clk_put(mout_mpll); + + if (!IS_ERR(mout_apll)) + clk_put(mout_apll); + +#ifdef CONFIG_REGULATOR + if (!IS_ERR(arm_regulator)) + regulator_put(arm_regulator); + + if (!IS_ERR(int_regulator)) + regulator_put(int_regulator); +#endif + + printk(KERN_ERR "%s: failed initialization\n", __func__); + + return -EINVAL; +} +late_initcall(s5pv310_cpufreq_init); diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-s5pv310/dev-audio.c new file mode 100644 index 000000000000..a1964242f0fa --- /dev/null +++ b/arch/arm/mach-s5pv310/dev-audio.c @@ -0,0 +1,364 @@ +/* linux/arch/arm/mach-s5pv310/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/audio.h> + +#include <mach/map.h> +#include <mach/dma.h> +#include <mach/irqs.h> + +static const char *rclksrc[] = { + [0] = "busclk", + [1] = "i2sclk", +}; + +static int s5pv310_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2)); + break; + case 1: + s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2)); + break; + case 2: + s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4)); + break; + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata i2sv5_pdata = { + .cfg_gpio = s5pv310_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI + | QUIRK_NEED_RSTCLR, + .src_clk = rclksrc, + }, + }, +}; + +static struct resource s5pv310_i2s0_resource[] = { + [0] = { + .start = S5PV310_PA_I2S0, + .end = S5PV310_PA_I2S0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_I2S0S_TX, + .end = DMACH_I2S0S_TX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv310_device_i2s0 = { + .name = "samsung-i2s", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv310_i2s0_resource), + .resource = s5pv310_i2s0_resource, + .dev = { + .platform_data = &i2sv5_pdata, + }, +}; + +static const char *rclksrc_v3[] = { + [0] = "sclk_i2s", + [1] = "no_such_clock", +}; + +static struct s3c_audio_pdata i2sv3_pdata = { + .cfg_gpio = s5pv310_cfg_i2s, + .type = { + .i2s = { + .quirks = QUIRK_NO_MUXPSR, + .src_clk = rclksrc_v3, + }, + }, +}; + +static struct resource s5pv310_i2s1_resource[] = { + [0] = { + .start = S5PV310_PA_I2S1, + .end = S5PV310_PA_I2S1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv310_device_i2s1 = { + .name = "samsung-i2s", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv310_i2s1_resource), + .resource = s5pv310_i2s1_resource, + .dev = { + .platform_data = &i2sv3_pdata, + }, +}; + +static struct resource s5pv310_i2s2_resource[] = { + [0] = { + .start = S5PV310_PA_I2S2, + .end = S5PV310_PA_I2S2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv310_device_i2s2 = { + .name = "samsung-i2s", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv310_i2s2_resource), + .resource = s5pv310_i2s2_resource, + .dev = { + .platform_data = &i2sv3_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3)); + break; + case 1: + s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3)); + break; + case 2: + s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3)); + break; + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5pv310_pcm_cfg_gpio, +}; + +static struct resource s5pv310_pcm0_resource[] = { + [0] = { + .start = S5PV310_PA_PCM0, + .end = S5PV310_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv310_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource), + .resource = s5pv310_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pv310_pcm1_resource[] = { + [0] = { + .start = S5PV310_PA_PCM1, + .end = S5PV310_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv310_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource), + .resource = s5pv310_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pv310_pcm2_resource[] = { + [0] = { + .start = S5PV310_PA_PCM2, + .end = S5PV310_PA_PCM2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM2_TX, + .end = DMACH_PCM2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM2_RX, + .end = DMACH_PCM2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv310_device_pcm2 = { + .name = "samsung-pcm", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource), + .resource = s5pv310_pcm2_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev) +{ + return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4)); +} + +static struct resource s5pv310_ac97_resource[] = { + [0] = { + .start = S5PV310_PA_AC97, + .end = S5PV310_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = s5pv310_ac97_cfg_gpio, +}; + +static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv310_device_ac97 = { + .name = "samsung-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv310_ac97_resource), + .resource = s5pv310_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s5pv310_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +/* S/PDIF Controller platform_device */ + +static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3)); + + return 0; +} + +static struct resource s5pv310_spdif_resource[] = { + [0] = { + .start = S5PV310_PA_SPDIF, + .end = S5PV310_PA_SPDIF + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_SPDIF, + .end = DMACH_SPDIF, + .flags = IORESOURCE_DMA, + }, +}; + +static struct s3c_audio_pdata samsung_spdif_pdata = { + .cfg_gpio = s5pv310_spdif_cfg_gpio, +}; + +static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv310_device_spdif = { + .name = "samsung-spdif", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv310_spdif_resource), + .resource = s5pv310_spdif_resource, + .dev = { + .platform_data = &samsung_spdif_pdata, + .dma_mask = &s5pv310_spdif_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv310/dev-pd.c b/arch/arm/mach-s5pv310/dev-pd.c new file mode 100644 index 000000000000..58a50c2d0b67 --- /dev/null +++ b/arch/arm/mach-s5pv310/dev-pd.c @@ -0,0 +1,139 @@ +/* linux/arch/arm/mach-s5pv310/dev-pd.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - Power Domain support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#include <mach/regs-pmu.h> + +#include <plat/pd.h> + +static int s5pv310_pd_enable(struct device *dev) +{ + struct samsung_pd_info *pdata = dev->platform_data; + u32 timeout; + + __raw_writel(S5P_INT_LOCAL_PWR_EN, pdata->base); + + /* Wait max 1ms */ + timeout = 10; + while ((__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) + != S5P_INT_LOCAL_PWR_EN) { + if (timeout == 0) { + printk(KERN_ERR "Power domain %s enable failed.\n", + dev_name(dev)); + return -ETIMEDOUT; + } + timeout--; + udelay(100); + } + + return 0; +} + +static int s5pv310_pd_disable(struct device *dev) +{ + struct samsung_pd_info *pdata = dev->platform_data; + u32 timeout; + + __raw_writel(0, pdata->base); + + /* Wait max 1ms */ + timeout = 10; + while (__raw_readl(pdata->base + 0x4) & S5P_INT_LOCAL_PWR_EN) { + if (timeout == 0) { + printk(KERN_ERR "Power domain %s disable failed.\n", + dev_name(dev)); + return -ETIMEDOUT; + } + timeout--; + udelay(100); + } + + return 0; +} + +struct platform_device s5pv310_device_pd[] = { + { + .name = "samsung-pd", + .id = 0, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_MFC_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 1, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_G3D_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 2, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_LCD0_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 3, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_LCD1_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 4, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_TV_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 5, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_CAM_CONF, + }, + }, + }, { + .name = "samsung-pd", + .id = 6, + .dev = { + .platform_data = &(struct samsung_pd_info) { + .enable = s5pv310_pd_enable, + .disable = s5pv310_pd_disable, + .base = S5P_PMU_GPS_CONF, + }, + }, + }, +}; diff --git a/arch/arm/mach-s5pv310/dma.c b/arch/arm/mach-s5pv310/dma.c new file mode 100644 index 000000000000..20066c7c9e56 --- /dev/null +++ b/arch/arm/mach-s5pv310/dma.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <plat/devs.h> +#include <plat/irqs.h> + +#include <mach/map.h> +#include <mach/irqs.h> + +#include <plat/s3c-pl330-pdata.h> + +static u64 dma_dmamask = DMA_BIT_MASK(32); + +static struct resource s5pv310_pdma0_resource[] = { + [0] = { + .start = S5PV310_PA_PDMA0, + .end = S5PV310_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA0, + .end = IRQ_PDMA0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata s5pv310_pdma0_pdata = { + .peri = { + [0] = DMACH_PCM0_RX, + [1] = DMACH_PCM0_TX, + [2] = DMACH_PCM2_RX, + [3] = DMACH_PCM2_TX, + [4] = DMACH_MSM_REQ0, + [5] = DMACH_MSM_REQ2, + [6] = DMACH_SPI0_RX, + [7] = DMACH_SPI0_TX, + [8] = DMACH_SPI2_RX, + [9] = DMACH_SPI2_TX, + [10] = DMACH_I2S0S_TX, + [11] = DMACH_I2S0_RX, + [12] = DMACH_I2S0_TX, + [13] = DMACH_I2S2_RX, + [14] = DMACH_I2S2_TX, + [15] = DMACH_UART0_RX, + [16] = DMACH_UART0_TX, + [17] = DMACH_UART2_RX, + [18] = DMACH_UART2_TX, + [19] = DMACH_UART4_RX, + [20] = DMACH_UART4_TX, + [21] = DMACH_SLIMBUS0_RX, + [22] = DMACH_SLIMBUS0_TX, + [23] = DMACH_SLIMBUS2_RX, + [24] = DMACH_SLIMBUS2_TX, + [25] = DMACH_SLIMBUS4_RX, + [26] = DMACH_SLIMBUS4_TX, + [27] = DMACH_AC97_MICIN, + [28] = DMACH_AC97_PCMIN, + [29] = DMACH_AC97_PCMOUT, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device s5pv310_device_pdma0 = { + .name = "s3c-pl330", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv310_pdma0_resource), + .resource = s5pv310_pdma0_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv310_pdma0_pdata, + }, +}; + +static struct resource s5pv310_pdma1_resource[] = { + [0] = { + .start = S5PV310_PA_PDMA1, + .end = S5PV310_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PDMA1, + .end = IRQ_PDMA1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_pl330_platdata s5pv310_pdma1_pdata = { + .peri = { + [0] = DMACH_PCM0_RX, + [1] = DMACH_PCM0_TX, + [2] = DMACH_PCM1_RX, + [3] = DMACH_PCM1_TX, + [4] = DMACH_MSM_REQ1, + [5] = DMACH_MSM_REQ3, + [6] = DMACH_SPI1_RX, + [7] = DMACH_SPI1_TX, + [8] = DMACH_I2S0S_TX, + [9] = DMACH_I2S0_RX, + [10] = DMACH_I2S0_TX, + [11] = DMACH_I2S1_RX, + [12] = DMACH_I2S1_TX, + [13] = DMACH_UART0_RX, + [14] = DMACH_UART0_TX, + [15] = DMACH_UART1_RX, + [16] = DMACH_UART1_TX, + [17] = DMACH_UART3_RX, + [18] = DMACH_UART3_TX, + [19] = DMACH_SLIMBUS1_RX, + [20] = DMACH_SLIMBUS1_TX, + [21] = DMACH_SLIMBUS3_RX, + [22] = DMACH_SLIMBUS3_TX, + [23] = DMACH_SLIMBUS5_RX, + [24] = DMACH_SLIMBUS5_TX, + [25] = DMACH_SLIMBUS0AUX_RX, + [26] = DMACH_SLIMBUS0AUX_TX, + [27] = DMACH_SPDIF, + [28] = DMACH_MAX, + [29] = DMACH_MAX, + [30] = DMACH_MAX, + [31] = DMACH_MAX, + }, +}; + +static struct platform_device s5pv310_device_pdma1 = { + .name = "s3c-pl330", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv310_pdma1_resource), + .resource = s5pv310_pdma1_resource, + .dev = { + .dma_mask = &dma_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &s5pv310_pdma1_pdata, + }, +}; + +static struct platform_device *s5pv310_dmacs[] __initdata = { + &s5pv310_device_pdma0, + &s5pv310_device_pdma1, +}; + +static int __init s5pv310_dma_init(void) +{ + platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs)); + + return 0; +} +arch_initcall(s5pv310_dma_init); diff --git a/arch/arm/mach-s5pv310/include/mach/dma.h b/arch/arm/mach-s5pv310/include/mach/dma.h new file mode 100644 index 000000000000..81209eb1409b --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/dma.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_DMA_H +#define __MACH_DMA_H + +/* This platform uses the common S3C DMA API driver for PL330 */ +#include <plat/s3c-dma-pl330.h> + +#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h index 99e7dad8a85a..1dd130a34782 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-s5pv310/include/mach/irqs.h @@ -25,6 +25,8 @@ #define IRQ_SPI(x) S5P_IRQ(x+32) +#define IRQ_MCT1 IRQ_SPI(35) + #define IRQ_EINT0 IRQ_SPI(40) #define IRQ_EINT1 IRQ_SPI(41) #define IRQ_EINT2 IRQ_SPI(42) @@ -36,9 +38,8 @@ #define IRQ_JPEG IRQ_SPI(48) #define IRQ_2D IRQ_SPI(49) #define IRQ_PCIE IRQ_SPI(50) -#define IRQ_SYSTEM_TIMER IRQ_SPI(51) +#define IRQ_MCT0 IRQ_SPI(51) #define IRQ_MFC IRQ_SPI(52) -#define IRQ_WDT IRQ_SPI(53) #define IRQ_AUDIO_SS IRQ_SPI(54) #define IRQ_AC97 IRQ_SPI(55) #define IRQ_SPDIF IRQ_SPI(56) @@ -54,6 +55,9 @@ #define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) #define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) +#define IRQ_PDMA0 COMBINER_IRQ(21, 0) +#define IRQ_PDMA1 COMBINER_IRQ(21, 1) + #define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) #define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) #define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) @@ -83,8 +87,13 @@ #define IRQ_HSMMC2 COMBINER_IRQ(29, 2) #define IRQ_HSMMC3 COMBINER_IRQ(29, 3) +#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) +#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) + #define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) +#define IRQ_MCT_L1 COMBINER_IRQ(35, 3) + #define IRQ_EINT4 COMBINER_IRQ(37, 0) #define IRQ_EINT5 COMBINER_IRQ(37, 1) #define IRQ_EINT6 COMBINER_IRQ(37, 2) @@ -101,7 +110,11 @@ #define IRQ_EINT16_31 COMBINER_IRQ(39, 0) -#define MAX_COMBINER_NR 40 +#define IRQ_MCT_L0 COMBINER_IRQ(51, 0) + +#define IRQ_WDT COMBINER_IRQ(53, 0) + +#define MAX_COMBINER_NR 54 #define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h index 7acf4e77e92e..33bcff2a9568 100644 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ b/arch/arm/mach-s5pv310/include/mach/map.h @@ -39,11 +39,15 @@ #define S5PV310_PA_SYSCON (0x10010000) #define S5P_PA_SYSCON S5PV310_PA_SYSCON +#define S5PV310_PA_PMU (0x10020000) + #define S5PV310_PA_CMU (0x10030000) #define S5PV310_PA_WATCHDOG (0x10060000) #define S5PV310_PA_RTC (0x10070000) +#define S5PV310_PA_DMC0 (0x10400000) + #define S5PV310_PA_COMBINER (0x10448000) #define S5PV310_PA_COREPERI (0x10500000) @@ -52,13 +56,38 @@ #define S5PV310_PA_GIC_DIST (0x10501000) #define S5PV310_PA_L2CC (0x10502000) +/* DMA */ +#define S5PV310_PA_MDMA 0x10810000 +#define S5PV310_PA_PDMA0 0x12680000 +#define S5PV310_PA_PDMA1 0x12690000 + #define S5PV310_PA_GPIO1 (0x11400000) #define S5PV310_PA_GPIO2 (0x11000000) #define S5PV310_PA_GPIO3 (0x03860000) +#define S5PV310_PA_MIPI_CSIS0 0x11880000 +#define S5PV310_PA_MIPI_CSIS1 0x11890000 + #define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) #define S5PV310_PA_SROMC (0x12570000) +#define S5P_PA_SROMC S5PV310_PA_SROMC + +/* S/PDIF */ +#define S5PV310_PA_SPDIF 0xE1100000 + +/* I2S */ +#define S5PV310_PA_I2S0 0x03830000 +#define S5PV310_PA_I2S1 0xE3100000 +#define S5PV310_PA_I2S2 0xE2A00000 + +/* PCM */ +#define S5PV310_PA_PCM0 0x03840000 +#define S5PV310_PA_PCM1 0x13980000 +#define S5PV310_PA_PCM2 0x13990000 + +/* AC97 */ +#define S5PV310_PA_AC97 0x139A0000 #define S5PV310_PA_UART (0x13800000) @@ -95,5 +124,7 @@ #define S3C_PA_IIC7 S5PV310_PA_IIC(7) #define S3C_PA_RTC S5PV310_PA_RTC #define S3C_PA_WDT S5PV310_PA_WATCHDOG +#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 +#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h index f1028cad9788..b5c4ada1cff5 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h @@ -19,6 +19,12 @@ #define S5P_INFORM0 S5P_CLKREG(0x800) +#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) +#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) + +#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) +#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) + #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) #define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) @@ -58,6 +64,8 @@ #define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) #define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) +#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) + #define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) #define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) @@ -66,8 +74,9 @@ #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) #define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) -#define S5P_CLKSRC_CORE S5P_CLKREG(0x10200) -#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x10500) +#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) +#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) +#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) #define S5P_MPLL_LOCK S5P_CLKREG(0x14004) @@ -80,10 +89,77 @@ #define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400) #define S5P_CLKDIV_CPU S5P_CLKREG(0x14500) +#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504) #define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600) +#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) +/* APLL_LOCK */ +#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ + +/* APLL_CON0 */ +#define S5P_APLLCON0_ENABLE_SHIFT (31) +#define S5P_APLLCON0_LOCKED_SHIFT (29) +#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) +#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) + +/* CLK_SRC_CPU */ +#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) +#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) + +/* CLKDIV_CPU0 */ +#define S5P_CLKDIV_CPU0_CORE_SHIFT (0) +#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) +#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) +#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT) +#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8) +#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT) +#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12) +#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT) +#define S5P_CLKDIV_CPU0_ATB_SHIFT (16) +#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT) +#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20) +#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) +#define S5P_CLKDIV_CPU0_APLL_SHIFT (24) +#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) + +/* CLKDIV_DMC0 */ +#define S5P_CLKDIV_DMC0_ACP_SHIFT (0) +#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) +#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) +#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) +#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8) +#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT) +#define S5P_CLKDIV_DMC0_DMC_SHIFT (12) +#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT) +#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16) +#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT) +#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20) +#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT) +#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24) +#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT) +#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) +#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) + +/* CLKDIV_TOP */ +#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) +#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) +#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) +#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT) +#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8) +#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT) +#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12) +#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT) +#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) +#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) + +/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ +#define S5P_CLKDIV_BUS_GDLR_SHIFT (0) +#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) +#define S5P_CLKDIV_BUS_GPLR_SHIFT (4) +#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) + /* Compatibility defines */ #define S5P_EPLL_CON S5P_EPLL_CON0 diff --git a/arch/arm/mach-s5pv310/include/mach/regs-mem.h b/arch/arm/mach-s5pv310/include/mach/regs-mem.h new file mode 100644 index 000000000000..834227140eaa --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-mem.h @@ -0,0 +1,23 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - SROMC and DMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_MEM_H +#define __ASM_ARCH_REGS_MEM_H __FILE__ + +#include <mach/map.h> + +#define S5P_DMC0_MEMCON_OFFSET 0x04 + +#define S5P_DMC0_MEMTYPE_SHIFT 8 +#define S5P_DMC0_MEMTYPE_MASK 0xF + +#endif /* __ASM_ARCH_REGS_MEM_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h b/arch/arm/mach-s5pv310/include/mach/regs-pmu.h new file mode 100644 index 000000000000..fb333d0f6073 --- /dev/null +++ b/arch/arm/mach-s5pv310/include/mach/regs-pmu.h @@ -0,0 +1,30 @@ +/* linux/arch/arm/mach-s5pv310/include/mach/regs-pmu.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5PV310 - Power management unit definition + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_PMU_H +#define __ASM_ARCH_REGS_PMU_H __FILE__ + +#include <mach/map.h> + +#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) + +#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) +#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) +#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) +#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) +#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) +#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) +#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) + +#define S5P_INT_LOCAL_PWR_EN 0x7 + +#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-srom.h b/arch/arm/mach-s5pv310/include/mach/regs-srom.h deleted file mode 100644 index 1898b3e10550..000000000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-srom.h +++ /dev/null @@ -1,50 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - SROMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_SROM_H -#define __ASM_ARCH_REGS_SROM_H __FILE__ - -#include <mach/map.h> - -#define S5PV310_SROMREG(x) (S5P_VA_SROMC + (x)) - -#define S5PV310_SROM_BW S5PV310_SROMREG(0x0) -#define S5PV310_SROM_BC0 S5PV310_SROMREG(0x4) -#define S5PV310_SROM_BC1 S5PV310_SROMREG(0x8) -#define S5PV310_SROM_BC2 S5PV310_SROMREG(0xc) -#define S5PV310_SROM_BC3 S5PV310_SROMREG(0x10) - -/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ - -#define S5PV310_SROM_BW__DATAWIDTH__SHIFT 0 -#define S5PV310_SROM_BW__ADDRMODE__SHIFT 1 -#define S5PV310_SROM_BW__WAITENABLE__SHIFT 2 -#define S5PV310_SROM_BW__BYTEENABLE__SHIFT 3 - -#define S5PV310_SROM_BW__CS_MASK 0xf - -#define S5PV310_SROM_BW__NCS0__SHIFT 0 -#define S5PV310_SROM_BW__NCS1__SHIFT 4 -#define S5PV310_SROM_BW__NCS2__SHIFT 8 -#define S5PV310_SROM_BW__NCS3__SHIFT 12 - -/* applies to same to BCS0 - BCS3 */ - -#define S5PV310_SROM_BCX__PMC__SHIFT 0 -#define S5PV310_SROM_BCX__TACP__SHIFT 4 -#define S5PV310_SROM_BCX__TCAH__SHIFT 8 -#define S5PV310_SROM_BCX__TCOH__SHIFT 12 -#define S5PV310_SROM_BCX__TACC__SHIFT 16 -#define S5PV310_SROM_BCX__TCOS__SHIFT 24 -#define S5PV310_SROM_BCX__TACS__SHIFT 28 - -#endif /* __ASM_ARCH_REGS_SROM_H */ diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c index 9cdd1e4d4a40..1ea4a9e83bbe 100644 --- a/arch/arm/mach-s5pv310/irq-combiner.c +++ b/arch/arm/mach-s5pv310/irq-combiner.c @@ -24,6 +24,7 @@ static DEFINE_SPINLOCK(irq_controller_lock); struct combiner_chip_data { unsigned int irq_offset; + unsigned int irq_mask; void __iomem *base; }; @@ -64,6 +65,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) spin_lock(&irq_controller_lock); status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); spin_unlock(&irq_controller_lock); + status &= chip_data->irq_mask; if (status == 0) goto out; @@ -106,10 +108,12 @@ void __init combiner_init(unsigned int combiner_nr, void __iomem *base, combiner_data[combiner_nr].base = base; combiner_data[combiner_nr].irq_offset = irq_start; + combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); /* Disable all interrupts */ - __raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR); + __raw_writel(combiner_data[combiner_nr].irq_mask, + base + COMBINER_ENABLE_CLEAR); /* Setup the Linux IRQ subsystem */ diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c index 2b8d4fc52d7c..9262966cd269 100644 --- a/arch/arm/mach-s5pv310/mach-smdkc210.c +++ b/arch/arm/mach-s5pv310/mach-smdkc210.c @@ -14,18 +14,21 @@ #include <linux/platform_device.h> #include <linux/smsc911x.h> #include <linux/io.h> +#include <linux/i2c.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/regs-srom.h> #include <plat/s5pv310.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> +#include <plat/iic.h> +#include <plat/pd.h> #include <mach/map.h> -#include <mach/regs-srom.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -139,13 +142,27 @@ static struct platform_device smdkc210_smsc911x = { }, }; +static struct i2c_board_info i2c_devs1[] __initdata = { + {I2C_BOARD_INFO("wm8994", 0x1a),}, +}; + static struct platform_device *smdkc210_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c1, &s3c_device_rtc, &s3c_device_wdt, + &s5pv310_device_ac97, + &s5pv310_device_i2s0, + &s5pv310_device_pd[PD_MFC], + &s5pv310_device_pd[PD_G3D], + &s5pv310_device_pd[PD_LCD0], + &s5pv310_device_pd[PD_LCD1], + &s5pv310_device_pd[PD_CAM], + &s5pv310_device_pd[PD_TV], + &s5pv310_device_pd[PD_GPS], &smdkc210_smsc911x, }; @@ -154,23 +171,22 @@ static void __init smdkc210_smsc911x_init(void) u32 cs1; /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5PV310_SROM_BW) & - ~(S5PV310_SROM_BW__CS_MASK << - S5PV310_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) << - S5PV310_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5PV310_SROM_BW); + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) | - (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) | - (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1); + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); } static void __init smdkc210_map_io(void) @@ -182,6 +198,9 @@ static void __init smdkc210_map_io(void) static void __init smdkc210_machine_init(void) { + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + smdkc210_smsc911x_init(); s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata); diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c index 35826d66632c..3eb029ca2073 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-s5pv310/mach-smdkv310.c @@ -14,18 +14,21 @@ #include <linux/platform_device.h> #include <linux/smsc911x.h> #include <linux/io.h> +#include <linux/i2c.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/regs-srom.h> #include <plat/s5pv310.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> +#include <plat/iic.h> +#include <plat/pd.h> #include <mach/map.h> -#include <mach/regs-srom.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -139,13 +142,27 @@ static struct platform_device smdkv310_smsc911x = { }, }; +static struct i2c_board_info i2c_devs1[] __initdata = { + {I2C_BOARD_INFO("wm8994", 0x1a),}, +}; + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c1, &s3c_device_rtc, &s3c_device_wdt, + &s5pv310_device_ac97, + &s5pv310_device_i2s0, + &s5pv310_device_pd[PD_MFC], + &s5pv310_device_pd[PD_G3D], + &s5pv310_device_pd[PD_LCD0], + &s5pv310_device_pd[PD_LCD1], + &s5pv310_device_pd[PD_CAM], + &s5pv310_device_pd[PD_TV], + &s5pv310_device_pd[PD_GPS], &smdkv310_smsc911x, }; @@ -154,23 +171,22 @@ static void __init smdkv310_smsc911x_init(void) u32 cs1; /* configure nCS1 width to 16 bits */ - cs1 = __raw_readl(S5PV310_SROM_BW) & - ~(S5PV310_SROM_BW__CS_MASK << - S5PV310_SROM_BW__NCS1__SHIFT); - cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) | - (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) | - (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) << - S5PV310_SROM_BW__NCS1__SHIFT; - __raw_writel(cs1, S5PV310_SROM_BW); + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (1 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); /* set timing for nCS1 suitable for ethernet chip */ - __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) | - (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) | - (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) | - (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) | - (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1); + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); } static void __init smdkv310_map_io(void) @@ -182,6 +198,9 @@ static void __init smdkv310_map_io(void) static void __init smdkv310_machine_init(void) { + s3c_i2c1_set_platdata(NULL); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + smdkv310_smsc911x_init(); s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata); diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c index 16d8fc00cafd..36bc3cf825e3 100644 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ b/arch/arm/mach-s5pv310/mach-universal_c210.c @@ -13,6 +13,9 @@ #include <linux/i2c.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/mmc/host.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -21,6 +24,7 @@ #include <plat/s5pv310.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/sdhci.h> #include <mach/map.h> @@ -116,6 +120,73 @@ static struct platform_device universal_gpio_keys = { }, }; +/* eMMC */ +static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { + .max_width = 8, + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE), + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply mmc0_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + +static struct regulator_init_data mmc0_fixed_voltage_init_data = { + .constraints = { + .name = "VMEM_VDD_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), + .consumer_supplies = mmc0_supplies, +}; + +static struct fixed_voltage_config mmc0_fixed_voltage_config = { + .supply_name = "MASSMEMORY_EN", + .microvolts = 2800000, + .gpio = S5PV310_GPE1(3), + .enable_high = true, + .init_data = &mmc0_fixed_voltage_init_data, +}; + +static struct platform_device mmc0_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &mmc0_fixed_voltage_config, + }, +}; + +/* SD */ +static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .ext_cd_gpio = S5PV310_GPX3(4), /* XEINT_28 */ + .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_GPIO, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* WiFi */ +static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .cd_type = S3C_SDHCI_CD_EXTERNAL, +}; + +static void __init universal_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&universal_hsmmc0_data); + s3c_sdhci2_set_platdata(&universal_hsmmc2_data); + s3c_sdhci3_set_platdata(&universal_hsmmc3_data); +} + /* I2C0 */ static struct i2c_board_info i2c0_devs[] __initdata = { /* Camera, To be updated */ @@ -127,6 +198,13 @@ static struct i2c_board_info i2c1_devs[] __initdata = { }; static struct platform_device *universal_devices[] __initdata = { + /* Samsung Platform Devices */ + &mmc0_fixed_voltage, + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + + /* Universal Devices */ &universal_gpio_keys, &s5p_device_onenand, }; @@ -140,6 +218,8 @@ static void __init universal_map_io(void) static void __init universal_machine_init(void) { + universal_sdhci_init(); + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 65dbfa8e0a86..6a161f317a79 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -56,3 +56,13 @@ config S5P_DEV_ONENAND bool help Compile in platform device definition for OneNAND controller + +config S5P_DEV_CSIS0 + bool + help + Compile in platform device definitions for MIPI-CSIS channel 0 + +config S5P_DEV_CSIS1 + bool + help + Compile in platform device definitions for MIPI-CSIS channel 1 diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index de65238a7aef..2b7317378103 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -28,3 +28,5 @@ obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o +obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o +obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 74f7f5a5446c..047d31c1bbd8 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -108,6 +108,11 @@ static struct map_desc s5p_iodesc[] __initdata = { .pfn = __phys_to_pfn(S3C_PA_WDT), .length = SZ_4K, .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_SROMC, + .pfn = __phys_to_pfn(S5P_PA_SROMC), + .length = SZ_4K, + .type = MT_DEVICE, }, }; diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c new file mode 100644 index 000000000000..dfab1c85f54f --- /dev/null +++ b/arch/arm/plat-s5p/dev-csis0.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * + * S5P series device definition for MIPI-CSIS channel 0 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <mach/map.h> + +static struct resource s5p_mipi_csis0_resource[] = { + [0] = { + .start = S5P_PA_MIPI_CSIS0, + .end = S5P_PA_MIPI_CSIS0 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MIPI_CSIS0, + .end = IRQ_MIPI_CSIS0, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device s5p_device_mipi_csis0 = { + .name = "s5p-mipi-csis", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), + .resource = s5p_mipi_csis0_resource, +}; diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c new file mode 100644 index 000000000000..e3053f27fbbf --- /dev/null +++ b/arch/arm/plat-s5p/dev-csis1.c @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * + * S5P series device definition for MIPI-CSIS channel 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <mach/map.h> + +static struct resource s5p_mipi_csis1_resource[] = { + [0] = { + .start = S5P_PA_MIPI_CSIS1, + .end = S5P_PA_MIPI_CSIS1 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MIPI_CSIS1, + .end = IRQ_MIPI_CSIS1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_mipi_csis1 = { + .name = "s5p-mipi-csis", + .id = 1, + .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), + .resource = s5p_mipi_csis1_resource, +}; diff --git a/arch/arm/plat-s5p/include/plat/csis.h b/arch/arm/plat-s5p/include/plat/csis.h new file mode 100644 index 000000000000..51e308c7981d --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/csis.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_CSIS_H_ +#define PLAT_S5P_CSIS_H_ __FILE__ + +/** + * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; +}; + +#endif /* PLAT_S5P_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index fef353d44513..d973d39666a3 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -15,6 +15,7 @@ #define S5P_VA_CHIPID S3C_ADDR(0x02000000) #define S5P_VA_CMU S3C_ADDR(0x02100000) +#define S5P_VA_PMU S3C_ADDR(0x02180000) #define S5P_VA_GPIO S3C_ADDR(0x02200000) #define S5P_VA_GPIO1 S5P_VA_GPIO #define S5P_VA_GPIO2 S3C_ADDR(0x02240000) diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h new file mode 100644 index 000000000000..f121ab5e76cb --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/regs-srom.h @@ -0,0 +1,54 @@ +/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * S5P SROMC register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_REGS_SROM_H +#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ + +#include <mach/map.h> + +#define S5P_SROMREG(x) (S5P_VA_SROMC + (x)) + +#define S5P_SROM_BW S5P_SROMREG(0x0) +#define S5P_SROM_BC0 S5P_SROMREG(0x4) +#define S5P_SROM_BC1 S5P_SROMREG(0x8) +#define S5P_SROM_BC2 S5P_SROMREG(0xc) +#define S5P_SROM_BC3 S5P_SROMREG(0x10) +#define S5P_SROM_BC4 S5P_SROMREG(0x14) +#define S5P_SROM_BC5 S5P_SROMREG(0x18) + +/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ + +#define S5P_SROM_BW__DATAWIDTH__SHIFT 0 +#define S5P_SROM_BW__ADDRMODE__SHIFT 1 +#define S5P_SROM_BW__WAITENABLE__SHIFT 2 +#define S5P_SROM_BW__BYTEENABLE__SHIFT 3 + +#define S5P_SROM_BW__CS_MASK 0xf + +#define S5P_SROM_BW__NCS0__SHIFT 0 +#define S5P_SROM_BW__NCS1__SHIFT 4 +#define S5P_SROM_BW__NCS2__SHIFT 8 +#define S5P_SROM_BW__NCS3__SHIFT 12 +#define S5P_SROM_BW__NCS4__SHIFT 16 +#define S5P_SROM_BW__NCS5__SHIFT 20 + +/* applies to same to BCS0 - BCS3 */ + +#define S5P_SROM_BCX__PMC__SHIFT 0 +#define S5P_SROM_BCX__TACP__SHIFT 4 +#define S5P_SROM_BCX__TCAH__SHIFT 8 +#define S5P_SROM_BCX__TCOH__SHIFT 12 +#define S5P_SROM_BCX__TACC__SHIFT 16 +#define S5P_SROM_BCX__TCOS__SHIFT 24 +#define S5P_SROM_BCX__TACS__SHIFT 28 + +#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c index c354089254fc..ea37c0461788 100644 --- a/arch/arm/plat-samsung/gpiolib.c +++ b/arch/arm/plat-samsung/gpiolib.c @@ -197,3 +197,10 @@ void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, s3c_gpiolib_add(chip); } } + +void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) + s3c_gpiolib_add(chip); +} diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index 7712ff6336f4..a0826ed2f9fe 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -25,10 +25,34 @@ extern void s3c64xx_ac97_setup_gpio(int); #define S5PC100_SPDIF_GPG3 1 extern void s5pc100_spdif_setup_gpio(int); +struct samsung_i2s { +/* If the Primary DAI has 5.1 Channels */ +#define QUIRK_PRI_6CHAN (1 << 0) +/* If the I2S block has a Stereo Overlay Channel */ +#define QUIRK_SEC_DAI (1 << 1) +/* + * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit) + * The Machine driver must provide suitably set clock to the I2S block. + */ +#define QUIRK_NO_MUXPSR (1 << 2) +#define QUIRK_NEED_RSTCLR (1 << 3) + /* Quirks of the I2S controller */ + u32 quirks; + + /* + * Array of clock names that can be used to generate I2S signals. + * Also corresponds to clocks of I2SMOD[10] + */ + const char **src_clk; +}; + /** * struct s3c_audio_pdata - common platform data for audio device drivers * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode */ struct s3c_audio_pdata { int (*cfg_gpio)(struct platform_device *); + union { + struct samsung_i2s i2s; + } type; }; diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 2d82a6cb1444..165fa8496c9e 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -96,6 +96,16 @@ extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; extern struct platform_device s5pv210_device_spdif; +extern struct platform_device s5pv310_device_ac97; +extern struct platform_device s5pv310_device_pcm0; +extern struct platform_device s5pv310_device_pcm1; +extern struct platform_device s5pv310_device_pcm2; +extern struct platform_device s5pv310_device_i2s0; +extern struct platform_device s5pv310_device_i2s1; +extern struct platform_device s5pv310_device_i2s2; +extern struct platform_device s5pv310_device_spdif; +extern struct platform_device s5pv310_device_pd[]; + extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; extern struct platform_device s5p6442_device_iis0; @@ -106,6 +116,8 @@ extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; extern struct platform_device s5p6450_device_iis0; +extern struct platform_device s5p6450_device_iis1; +extern struct platform_device s5p6450_device_iis2; extern struct platform_device s5p6450_device_pcm0; extern struct platform_device s5pc100_device_ac97; @@ -122,6 +134,9 @@ extern struct platform_device s5p_device_fimc0; extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; +extern struct platform_device s5p_device_mipi_csis0; +extern struct platform_device s5p_device_mipi_csis1; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 13a22b8861ef..dac35d0a711d 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -118,6 +118,8 @@ extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, int nr_chips); extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, int nr_chips); +extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, + int nr_chips); extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); |