diff options
| author | Takashi Iwai <tiwai@suse.de> | 2017-10-24 09:15:23 +0200 |
|---|---|---|
| committer | Takashi Iwai <tiwai@suse.de> | 2017-10-31 11:06:39 +0100 |
| commit | 727dede0ba8afbd8d19116d39f2ae8d19d00033d (patch) | |
| tree | 45e476bd259b8d5e7851f1adf31fe5e3f21fd27b /sound | |
| parent | 3f1185d6c9d3fe91aa85ec8d3f4d71207452c458 (diff) | |
sound: Retire OSS
Since no complaints have been raised after disabling the build of OSS
(Open Sound System) by the commit 31cbee6a5611 ("sound: Disable the
build of OSS drivers"), let's finally drop the whole code and
documentation.
Some glue codes are still left intact since sound/oss/dmasound stuff
remains -- which is an independent implementation solely for m68k, and
it's not covered by ALSA yet.
Also, a couple of API header files (linux/sound.h and
linux/soundcard.h) are kept remaining as well, since the OSS API
itself is still supported by ALSA OSS emulation, and applications can
refer to these.
Where we're at it, some help texts in the top-level Kconfig are
adjusted, too (who still needs to specify I/O port in kbuild
nowadays?).
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound')
71 files changed, 2 insertions, 36235 deletions
diff --git a/sound/Kconfig b/sound/Kconfig index d7d2aac9542e..b6d047985905 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -3,25 +3,7 @@ menuconfig SOUND depends on HAS_IOMEM help If you have a sound card in your computer, i.e. if it can say more - than an occasional beep, say Y. Be sure to have all the information - about your sound card and its configuration down (I/O port, - interrupt and DMA channel), because you will be asked for it. - - You want to read the Sound-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. General information about - the modular sound system is contained in the files - <file:Documentation/sound/oss/Introduction>. The file - <file:Documentation/sound/oss/README.OSS> contains some slightly - outdated but still useful information as well. Newer sound - driver documentation is found in <file:Documentation/sound/alsa/*>. - - If you have a PnP sound card and you want to configure it at boot - time using the ISA PnP tools (read - <http://www.roestock.demon.co.uk/isapnptools/>), then you need to - compile the sound card support as a module and load that module - after the PnP configuration is finished. To do this, choose M here - and read <file:Documentation/sound/oss/README.modules>; the module - will be called soundcore. + than an occasional beep, say Y. if SOUND @@ -114,19 +96,6 @@ source "sound/synth/Kconfig" endif # SND -menuconfig SOUND_PRIME - tristate "Open Sound System (DEPRECATED)" - select SOUND_OSS_CORE - depends on BROKEN - help - Say 'Y' or 'M' to enable Open Sound System drivers. - -if SOUND_PRIME - -source "sound/oss/Kconfig" - -endif # SOUND_PRIME - endif # !UML endif # SOUND diff --git a/sound/Makefile b/sound/Makefile index 6de45d2c32f7..e5794fdd3d79 100644 --- a/sound/Makefile +++ b/sound/Makefile @@ -2,8 +2,7 @@ # obj-$(CONFIG_SOUND) += soundcore.o -obj-$(CONFIG_SOUND_PRIME) += oss/ -obj-$(CONFIG_DMASOUND) += oss/ +obj-$(CONFIG_DMASOUND) += oss/dmasound/ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ firewire/ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ hda/ x86/ obj-$(CONFIG_SND_AOA) += aoa/ diff --git a/sound/oss/CHANGELOG b/sound/oss/CHANGELOG deleted file mode 100644 index 8706cd66ca1f..000000000000 --- a/sound/oss/CHANGELOG +++ /dev/null @@ -1,369 +0,0 @@ -Note these changes relate to Hannu's code and don't include the changes -made outside of this for modularising the sound - -Changelog for version 3.8o --------------------------- - -Since 3.8h -- Included support for OPL3-SA1 and SoftOSS - -Since 3.8 -- Fixed SNDCTL_DSP_GETOSPACE -- Compatibility fixes for Linux 2.1.47 - -Since 3.8-beta21 -- Fixed all known bugs (I think). - -Since 3.8-beta8 -- Lot of fixes to audio playback code in dmabuf.c - -Since 3.8-beta6 -- Fixed the famous Quake delay bug. - -Since 3.8-beta5 -- Fixed many bugs in audio playback. - -Since 3.8-beta4 -- Just minor changes. - -Since 3.8-beta1 -- Major rewrite of audio playback handling. -- Added AWE32 support by Takashi Iwai (in ./lowlevel/). - -Since 3.7-beta# -- Passing of ioctl() parameters between soundcard.c and other modules has been -changed so that arg always points to kernel space. -- Some bugfixes. - -Since 3.7-beta5 -- Disabled MIDI input with GUS PnP (Interwave). There seems to be constant -stream of received 0x00 bytes when the MIDI receiver is enabled. - -Since 3.5 -- Changes almost everywhere. -- Support for OPTi 82C924-based sound cards. - -Since 3.5.4-beta8 -- Fixed a bug in handling of non-fragment sized writes in 16 bit/stereo mode - with GUS. -- Limited minimum fragment size with some audio devices (GUS=512 and - SB=32). These devices require more time to "recover" from processing - of each fragment. - -Since 3.5.4-beta6/7 -- There seems to be problems in the OPTi 82C930 so cards based on this - chip don't necessarily work yet. There are problems in detecting the - MIDI interface. Also mixer volumes may be seriously wrong on some systems. - You can safely use this driver version with C930 if it looks to work. - However please don't complain if you have problems with it. C930 support - should be fixed in future releases. -- Got initialization of GUS PnP to work. With this version GUS PnP should - work in GUS compatible mode after initialization using isapnptools. -- Fixed a bug in handling of full duplex cards in write only mode. This has - been causing "audio device opening" errors with RealAudio player. - -Since 3.5.4.beta5 -- Changes to OPTi 82C930 driver. -- Major changes to the Soundscape driver. The driver requires now just one - DMA channel. The extra audio/dsp device (the "Not functional" one) used - for code download in the earlier versions has been eliminated. There is now - just one /dev/dsp# device which is used both for code download and audio. - -Since 3.5.4.beta4 -- Minor changes. - -Since 3.5.4-beta2 -- Fixed silent playback with ESS 688/1688. -- Got SB16 to work without the 16 bit DMA channel (only the 8 bit one - is required for 8 and 16 bit modes). -- Added the "lowlevel" subdirectory for additional low level drivers that - are not part of USS core. See lowlevel/README for more info. -- Included support for ACI mixer (by Markus Kuhn). ACI is a mixer used in - miroPCM sound cards. See lowlevel/aci.readme for more info. -- Support for Aztech Washington chipset (AZT2316 ASIC). - -Since 3.5.4-beta1 -- Reduced clicking with AD1848. -- Support for OPTi 82C930. Only half duplex at this time. 16 bit playback - is sometimes just white noise (occurs randomly). - -Since 3.5.2 -- Major changes to the SB/Jazz16/ESS driver (most parts rewritten). - The most noticeable new feature is support for multiple SB cards at the same - time. -- Renamed sb16_midi.c to uart401.c. Also modified it to work also with - other MPU401 UART compatible cards than SB16/ESS/Jazz. -- Some changes which reduce clicking in audio playback. -- Copying policy is now GPL. - -Since 3.5.1 -- TB Maui initialization support -Since 3.5 -- Improved handling of playback underrun situations. - -Since 3.5-beta10 -- Bug fixing - -Since 3.5-beta9 -- Fixed for compatibility with Linux 1.3.70 and later. -- Changed boot time passing of 16 bit DMA channel number to SB driver. - -Since 3.5-beta8 -- Minor changes - -Since 3.5-beta7 -- enhancements to configure program (by Jeff Tranter): - - prompts are in same format as 1.3.x Linux kernel config program - - on-line help for each question - - fixed some compile warnings detected by gcc/g++ -Wall - - minor grammatical changes to prompts - -Since 3.5-beta6 -- Fixed bugs in mmap() support. -- Minor changes to Maui driver. - -Since 3.5-beta5 -- Fixed crash after recording with ESS688. It's generally a good - idea to stop inbound DMA transfers before freeing the memory - buffer. -- Fixed handling of AD1845 codec (for example Shuttle Sound System). -- Few other fixes. - -Since 3.5-beta4 -- Fixed bug in handling of uninitialized instruments with GUS. - -Since 3.5-beta3 -- Few changes which decrease popping at end/beginning of audio playback. - -Since 3.5-beta2 -- Removed MAD16+CS4231 hack made in previous version since it didn't - help. -- Fixed the above bug in proper way and in proper place. Many thanks - to James Hightower. - -Since 3.5-beta1 -- Bug fixes. -- Full duplex audio with MAD16+CS4231 may work now. The driver configures - SB DMA of MAD16 so that it doesn't conflict with codec's DMA channels. - The side effect is that all 8 bit DMA channels (0,1,3) are populated in - duplex mode. - -Since 3.5-alpha9 -- Bug fixes (mostly in Jazz16 and ESS1688/688 supports). -- Temporarily disabled recording with ESS1688/688 since it causes crash. -- Changed audio buffer partitioning algorithm so that it selects - smaller fragment size than earlier. This improves real time capabilities - of the driver and makes recording to disk to work better. Unfortunately - this change breaks some programs which assume that fragments cannot be - shorter than 4096 bytes. - -Since 3.5-alpha8 -- Bug fixes - -Since 3.5-alpha7 -- Linux kernel compatible configuration (_EXPERIMENTAL_). Enable - using command "cd /linux/drivers/sound;make script" and then - just run kernel's make config normally. -- Minor fixes to the SB support. Hopefully the driver works with - all SB models now. -- Added support for ESS ES1688 "AudioDrive" based cards. - -Since 3.5-alpha6 -- SB Pro and SB16 supports are no longer separately selectable options. - Enabling SB enables them too. -- Changed all #ifndef EXCLUDE_xx stuff to #ifdef CONFIG_xx. Modified -configure to handle this. -- Removed initialization messages from the -modularized version. They can be enabled by using init_trace=1 in -the insmod command line (insmod sound init_trace=1). -- More AIX stuff. -- Added support for synchronizing dsp/audio devices with /dev/sequencer. -- mmap() support for dsp/audio devices. - -Since 3.5-alpha5 -- AIX port. -- Changed some xxx_PATCH macros in soundcard.h to work with - big endian machines. - -Since 3.5-alpha4 -- Removed the 'setfx' stuff from the version distributed with kernel - sources. Running 'setfx' is required again. - -Since 3.5-alpha3 -- Moved stuff from the 'setfx' program to the AudioTrix Pro driver. - -Since 3.5-alpha2 -- Modifications to makefile and configure.c. Unnecessary sources - are no longer compiled. Newly created local.h is also copied to - /etc/soundconf. "make oldconfig" reads /etc/soundconf and produces - new local.h which is compatible with current version of the driver. -- Some fixes to the SB16 support. -- Fixed random protection fault in gus_wave.c - -Since 3.5-alpha1 -- Modified to work with Linux-1.3.33 and later -- Some minor changes - -Since 3.0.2 -- Support for CS4232 based PnP cards (AcerMagic S23 etc). -- Full duplex support for some CS4231, CS4232 and AD1845 based cards -(GUS MAX, AudioTrix Pro, AcerMagic S23 and many MAD16/Mozart cards -having a codec mentioned above). -- Almost fully rewritten loadable modules support. -- Fixed some bugs. -- Huge amount of testing (more testing is still required). -- mmap() support (works with some cards). Requires much more testing. -- Sample/patch/program loading for TB Maui/Tropez. No initialization -since TB doesn't allow me to release that code. -- Using CS4231 compatible codecs as timer for /dev/music. - -Since 3.0.1 -- Added allocation of I/O ports, DMA channels and interrupts -to the initialization code. This may break modules support since -the driver may not free some resources on unload. Should be fixed soon. - -Since 3.0 -- Some important bug fixes. -- select() for /dev/dsp and /dev/audio (Linux only). -(To use select() with read, you have to call read() to start -the recording. Calling write() kills recording immediately so -use select() carefully when you are writing a half duplex app. -Full duplex mode is not implemented yet.) Select works also with -/dev/sequencer and /dev/music. Maybe with /dev/midi## too. - -Since 3.0-beta2 -- Minor fixes. -- Added Readme.cards - -Since 3.0-beta1 -- Minor fixes to the modules support. -- Eliminated call to sb_free_irq() in ad1848.c -- Rewritten MAD16&Mozart support (not tested with MAD16 Pro). -- Fix to DMA initialization of PSS cards. -- Some fixes to ad1848/cs42xx mixer support (GUS MAX, MSS, etc.) -- Fixed some bugs in the PSS driver which caused I/O errors with - the MSS mode (/dev/dsp). - -Since 3.0-950506 -- Recording with GUS MAX fixed. It works when the driver is configured - to use two DMA channels with GUS MAX (16 bit ones recommended). - -Since 3.0-94xxxx -- Too many changes - -Since 3.0-940818 -- Fixes for Linux 1.1.4x. -- Disables Disney Sound System with SG NX Pro 16 (less noise). - -Since 2.90-2 -- Fixes to soundcard.h -- Non blocking mode to /dev/sequencer -- Experimental detection code for Ensoniq Soundscape. - -Since 2.90 -- Minor and major bug fixes - -Since pre-3.0-940712 -- GUS MAX support -- Partially working MSS/WSS support (could work with some cards). -- Hardware u-Law and A-Law support with AD1848/CS4248 and CS4231 codecs - (GUS MAX, GUS16, WSS etc). Hardware ADPCM is possible with GUS16 and - GUS MAX, but it doesn't work yet. -Since pre-3.0-940426 -- AD1848/CS4248/CS4231 codec support (MSS, GUS MAX, Aztec, Orchid etc). -This codec chip is used in various sound cards. This version is developed -for the 16 bit daughtercard of GUS. It should work with other cards also -if the following requirements are met: - - The I/O, IRQ and DMA settings are jumper selectable or - the card is initialized by booting DOS before booting Linux (etc.). - - You add the IO, IRQ and DMA settings manually to the local.h. - (Just define GUS16_BASE, GUS16_IRQ and GUS16_DMA). Note that - the base address bust be the base address of the codec chip not the - card itself. For the GUS16 these are the same but most MSS compatible - cards have the codec located at card_base+4. -- Some minor changes - -Since 2.5 (******* MAJOR REWRITE ***********) - -This version is based on v2.3. I have tried to maintain two versions -together so that this one should have the same features than v2.5. -Something may still be missing. If you notice such things, please let me -know. - -The Readme.v30 contains more details. - -- /dev/midi## devices. -- /dev/sequencer2 - -Since 2.5-beta2 -- Some fine tuning to the GUS v3.7 mixer code. -- Fixed speed limits for the plain SB (1.0 to 2.0). - -Since 2.5-beta -- Fixed OPL-3 detection with SB. Caused problems with PAS16. -- GUS v3.7 mixer support. - -Since 2.4 -- Mixer support for Sound Galaxy NX Pro (define __SGNXPRO__ on your local.h). -- Fixed truncated sound on /dev/dsp when the device is closed. -- Linear volume mode for GUS -- Pitch bends larger than +/- 2 octaves. -- MIDI recording for SB and SB Pro. (Untested). -- Some other fixes. -- SB16 MIDI and DSP drivers only initialized if SB16 actually installed. -- Implemented better detection for OPL-3. This should be useful if you - have an old SB Pro (the non-OPL-3 one) or a SB 2.0 clone which has a OPL-3. -- SVR4.2 support by Ian Hartas. Initial ALPHA TEST version (untested). - -Since 2.3b -- Fixed bug which made it impossible to make long recordings to disk. - Recording was not restarted after a buffer overflow situation. -- Limited mixer support for GUS. -- Numerous improvements to the GUS driver by Andrew Robinson. Including - some click removal etc. - -Since 2.3 -- Fixed some minor bugs in the SB16 driver. - -Since 2.2b -- Full SB16 DSP support. 8/16 bit, mono/stereo -- The SCO and FreeBSD versions should be in sync now. There are some - problems with SB16 and GUS in the FreeBSD versions. - The DMA buffer allocation of the SCO version has been polished but - there could still be some problems. At least it hogs memory. - The DMA channel - configuration method used in the SCO/System is a hack. -- Support for the MPU emulation of the SB16. -- Some big arrays are now allocated boot time. This makes the BSS segment - smaller which makes it possible to use the full driver with - NetBSD. These arrays are not allocated if no suitable sound card is available. -- Fixed a bug in the compute_and_set_volume in gus_wave.c -- Fixed the too fast mono playback problem of SB Pro and PAS16. - -Since 2.2 -- Stereo recording for SB Pro. Somehow it was missing and nobody - had noticed it earlier. -- Minor polishing. -- Interpreting of boot time arguments (sound=) for Linux. -- Breakup of sb_dsp.c. Parts of the code has been moved to - sb_mixer.c and sb_midi.c - -Since 2.1 -- Preliminary support for SB16. - - The SB16 mixer is supported in its native mode. - - Digitized voice capability up to 44.1 kHz/8 bit/mono - (16 bit and stereo support coming in the next release). -- Fixed some bugs in the digitized voice driver for PAS16. -- Proper initialization of the SB emulation of latest PAS16 models. - -- Significantly improved /dev/dsp and /dev/audio support. - - Now supports half duplex mode. It's now possible to record and - playback without closing and reopening the device. - - It's possible to use smaller buffers than earlier. There is a new - ioctl(fd, SNDCTL_DSP_SUBDIVIDE, &n) where n should be 1, 2 or 4. - This call instructs the driver to use smaller buffers. The default - buffer size (0.5 to 1.0 seconds) is divided by n. Should be called - immediately after opening the device. - -Since 2.0 -Just cosmetic changes. diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig deleted file mode 100644 index 4033fe58f0cf..000000000000 --- a/sound/oss/Kconfig +++ /dev/null @@ -1,533 +0,0 @@ -# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net> -# More hacking for modularisation. -# -# Prompt user for primary drivers. - -config SOUND_BCM_CS4297A - tristate "Crystal Sound CS4297a (for Swarm)" - depends on SIBYTE_SWARM - help - The BCM91250A has a Crystal CS4297a on synchronous serial - port B (in addition to the DB-9 serial port). Say Y or M - here to enable the sound chip instead of the UART. Also - note that CONFIG_KGDB should not be enabled at the same - time, since it also attempts to use this UART port. - -config SOUND_MSNDCLAS - tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" - depends on (m || !STANDALONE) && ISA - help - Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or - Monterey (not for the Pinnacle or Fiji). - - See <file:Documentation/sound/oss/MultiSound> for important information - about this driver. Note that it has been discontinued, but the - Voyetra Turtle Beach knowledge base entry for it is still available - at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. - -comment "Compiled-in MSND Classic support requires firmware during compilation." - depends on SOUND_PRIME && SOUND_MSNDCLAS=y - -config MSNDCLAS_HAVE_BOOT - bool - depends on SOUND_MSNDCLAS=y && !STANDALONE - default y - -config MSNDCLAS_INIT_FILE - string "Full pathname of MSNDINIT.BIN firmware file" - depends on SOUND_MSNDCLAS - default "/etc/sound/msndinit.bin" - help - The MultiSound cards have two firmware files which are required for - operation, and are not currently included. These files can be - obtained from Turtle Beach. See - <file:Documentation/sound/oss/MultiSound> for information on how to - obtain this. - -config MSNDCLAS_PERM_FILE - string "Full pathname of MSNDPERM.BIN firmware file" - depends on SOUND_MSNDCLAS - default "/etc/sound/msndperm.bin" - help - The MultiSound cards have two firmware files which are required for - operation, and are not currently included. These files can be - obtained from Turtle Beach. See - <file:Documentation/sound/oss/MultiSound> for information on how to - obtain this. - -config MSNDCLAS_IRQ - int "MSND Classic IRQ 5, 7, 9, 10, 11, 12" - depends on SOUND_MSNDCLAS=y - default "5" - help - Interrupt Request line for the MultiSound Classic and related cards. - -config MSNDCLAS_MEM - hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000" - depends on SOUND_MSNDCLAS=y - default "D0000" - help - Memory-mapped I/O base address for the MultiSound Classic and - related cards. - -config MSNDCLAS_IO - hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0" - depends on SOUND_MSNDCLAS=y - default "290" - help - I/O port address for the MultiSound Classic and related cards. - -config SOUND_MSNDPIN - tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji" - depends on (m || !STANDALONE) && ISA - help - Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji. - See <file:Documentation/sound/oss/MultiSound> for important information - about this driver. Note that it has been discontinued, but the - Voyetra Turtle Beach knowledge base entry for it is still available - at <http://www.turtlebeach.com/site/kb_ftp/600.asp>. - -comment "Compiled-in MSND Pinnacle support requires firmware during compilation." - depends on SOUND_PRIME && SOUND_MSNDPIN=y - -config MSNDPIN_HAVE_BOOT - bool - depends on SOUND_MSNDPIN=y - default y - -config MSNDPIN_INIT_FILE - string "Full pathname of PNDSPINI.BIN firmware file" - depends on SOUND_MSNDPIN - default "/etc/sound/pndspini.bin" - help - The MultiSound cards have two firmware files which are required - for operation, and are not currently included. These files can be - obtained from Turtle Beach. See - <file:Documentation/sound/oss/MultiSound> for information on how to - obtain this. - -config MSNDPIN_PERM_FILE - string "Full pathname of PNDSPERM.BIN firmware file" - depends on SOUND_MSNDPIN - default "/etc/sound/pndsperm.bin" - help - The MultiSound cards have two firmware files which are required for - operation, and are not currently included. These files can be - obtained from Turtle Beach. See - <file:Documentation/sound/oss/MultiSound> for information on how to - obtain this. - -config MSNDPIN_IRQ - int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12" - depends on SOUND_MSNDPIN=y - default "5" - help - Interrupt request line for the primary synthesizer on MultiSound - Pinnacle and Fiji sound cards. - -config MSNDPIN_MEM - hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000" - depends on SOUND_MSNDPIN=y - default "D0000" - help - Memory-mapped I/O base address for the primary synthesizer on - MultiSound Pinnacle and Fiji sound cards. - -config MSNDPIN_IO - hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0" - depends on SOUND_MSNDPIN=y - default "290" - help - Memory-mapped I/O base address for the primary synthesizer on - MultiSound Pinnacle and Fiji sound cards. - -config MSNDPIN_DIGITAL - bool "MSND Pinnacle has S/PDIF I/O" - depends on SOUND_MSNDPIN=y - help - If you have the S/PDIF daughter board for the Pinnacle or Fiji, - answer Y here; otherwise, say N. If you have this, you will be able - to play and record from the S/PDIF port (digital signal). See - <file:Documentation/sound/oss/MultiSound> for information on how to make - use of this capability. - -config MSNDPIN_NONPNP - bool "MSND Pinnacle non-PnP Mode" - depends on SOUND_MSNDPIN=y - help - The Pinnacle and Fiji card resources can be configured either with - PnP, or through a configuration port. Say Y here if your card is NOT - in PnP mode. For the Pinnacle, configuration in non-PnP mode allows - use of the IDE and joystick peripherals on the card as well; these - do not show up when the card is in PnP mode. Specifying zero for any - resource of a device will disable the device. If you are running the - card in PnP mode, you must say N here and use isapnptools to - configure the card's resources. - -comment "MSND Pinnacle DSP section will be configured to above parameters." - depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP - -config MSNDPIN_CFG - hex "MSND Pinnacle config port 250,260,270" - depends on MSNDPIN_NONPNP - default "250" - help - This is the port which the Pinnacle and Fiji uses to configure the - card's resources when not in PnP mode. If your card is in PnP mode, - then be sure to say N to the previous option, "MSND Pinnacle Non-PnP - Mode". - -comment "Pinnacle-specific Device Configuration (0 disables)" - depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP - -config MSNDPIN_MPU_IO - hex "MSND Pinnacle MPU I/O (e.g. 330)" - depends on MSNDPIN_NONPNP - default "0" - help - Memory-mapped I/O base address for the Kurzweil daughterboard - synthesizer on MultiSound Pinnacle and Fiji sound cards. - -config MSNDPIN_MPU_IRQ - int "MSND Pinnacle MPU IRQ (e.g. 9)" - depends on MSNDPIN_NONPNP - default "0" - help - Interrupt request number for the Kurzweil daughterboard - synthesizer on MultiSound Pinnacle and Fiji sound cards. - -config MSNDPIN_IDE_IO0 - hex "MSND Pinnacle IDE I/O 0 (e.g. 170)" - depends on MSNDPIN_NONPNP - default "0" - help - CD-ROM drive 0 memory-mapped I/O base address for the MultiSound - Pinnacle and Fiji sound cards. - -config MSNDPIN_IDE_IO1 - hex "MSND Pinnacle IDE I/O 1 (e.g. 376)" - depends on MSNDPIN_NONPNP - default "0" - help - CD-ROM drive 1 memory-mapped I/O base address for the MultiSound - Pinnacle and Fiji sound cards. - -config MSNDPIN_IDE_IRQ - int "MSND Pinnacle IDE IRQ (e.g. 15)" - depends on MSNDPIN_NONPNP - default "0" - help - Interrupt request number for the IDE CD-ROM interface on the - MultiSound Pinnacle and Fiji sound cards. - -config MSNDPIN_JOYSTICK_IO - hex "MSND Pinnacle joystick I/O (e.g. 200)" - depends on MSNDPIN_NONPNP - default "0" - help - Memory-mapped I/O base address for the joystick port on MultiSound - Pinnacle and Fiji sound cards. - -config MSND_FIFOSIZE - int "MSND buffer size (kB)" - depends on SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y - default "128" - help - Configures the size of each audio buffer, in kilobytes, for - recording and playing in the MultiSound drivers (both the Classic - and Pinnacle). Larger values reduce the chance of data overruns at - the expense of overall latency. If unsure, use the default. - -menuconfig SOUND_OSS - tristate "OSS sound modules" - depends on ISA_DMA_API && (VIRT_TO_BUS || ARCH_RPC || ARCH_NETWINDER) - depends on !GENERIC_ISA_DMA_SUPPORT_BROKEN - help - OSS is the Open Sound System suite of sound card drivers. They make - sound programming easier since they provide a common API. Say Y or - M here (the module will be called sound) if you haven't found a - driver for your sound card above, then pick your driver from the - list below. - -if SOUND_OSS - -config SOUND_TRACEINIT - bool "Verbose initialisation" - help - Verbose soundcard initialization -- affects the format of autoprobe - and initialization messages at boot time. - -config SOUND_DMAP - bool "Persistent DMA buffers" - ---help--- - Linux can often have problems allocating DMA buffers for ISA sound - cards on machines with more than 16MB of RAM. This is because ISA - DMA buffers must exist below the 16MB boundary and it is quite - possible that a large enough free block in this region cannot be - found after the machine has been running for a while. If you say Y - here the DMA buffers (64Kb) will be allocated at boot time and kept - until the shutdown. This option is only useful if you said Y to - "OSS sound modules", above. If you said M to "OSS sound modules" - then you can get the persistent DMA buffer functionality by passing - the command-line argument "dmabuf=1" to the sound module. - - Say Y unless you have 16MB or more RAM or a PCI sound card. - -config SOUND_VMIDI - tristate "Loopback MIDI device support" - help - Support for MIDI loopback on port 1 or 2. - -config SOUND_TRIX - tristate "MediaTrix AudioTrix Pro support" - help - Answer Y if you have the AudioTriX Pro sound card manufactured - by MediaTrix. - -config TRIX_HAVE_BOOT - bool "Have TRXPRO.HEX firmware file" - depends on SOUND_TRIX=y && !STANDALONE - help - The MediaTrix AudioTrix Pro has an on-board microcontroller which - needs to be initialized by downloading the code from the file - TRXPRO.HEX in the DOS driver directory. If you don't have the - TRXPRO.HEX file handy you may skip this step. However, the SB and - MPU-401 modes of AudioTrix Pro will not work without this file! - -config TRIX_BOOT_FILE - string "Full pathname of TRXPRO.HEX firmware file" - depends on TRIX_HAVE_BOOT - default "/etc/sound/trxpro.hex" - help - Enter the full pathname of your TRXPRO.HEX file, starting from /. - -config SOUND_MSS - tristate "Microsoft Sound System support" - ---help--- - Again think carefully before answering Y to this question. It's - safe to answer Y if you have the original Windows Sound System card - made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may - say Y in case your card is NOT among these: - - ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16, - Ensoniq SoundScape (and compatibles made by Reveal and Spea), - Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max, - Gravis Ultrasound with 16 bit option, Logitech Sound Man 16, - Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi - 82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft - Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid - SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro - Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface, - Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound - Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M - notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM - synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface. - - For cards having native support in VoxWare, consult the card - specific instructions in <file:Documentation/sound/oss/README.OSS>. - Some drivers have their own MSS support and saying Y to this option - will cause a conflict. - - If you compile the driver into the kernel, you have to add - "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command - line. - -config SOUND_MPU401 - tristate "MPU-401 support (NOT for SB16)" - ---help--- - Be careful with this question. The MPU401 interface is supported by - all sound cards. However, some natively supported cards have their - own driver for MPU401. Enabling this MPU401 option with these cards - will cause a conflict. Also, enabling MPU401 on a system that - doesn't really have a MPU401 could cause some trouble. If your card - was in the list of supported cards, look at the card specific - instructions in the <file:Documentation/sound/oss/README.OSS> file. It - is safe to answer Y if you have a true MPU401 MIDI interface card. - - If you compile the driver into the kernel, you have to add - "mpu401=<io>,<irq>" to the kernel command line. - -config SOUND_PAS - tristate "ProAudioSpectrum 16 support" - ---help--- - Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio - 16 or Logitech SoundMan 16 sound card. Answer N if you have some - other card made by Media Vision or Logitech since those are not - PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>. - It is not necessary to add Sound Blaster support separately; it - is included in PAS support. - - If you compile the driver into the kernel, you have to add - "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2> - to the kernel command line. - -config PAS_JOYSTICK - bool "Enable PAS16 joystick port" - depends on SOUND_PAS=y - help - Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick - port. - -config SOUND_PSS - tristate "PSS (AD1848, ADSP-2115, ESC614) support" - help - Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven - ADSP-16 or some other card based on the PSS chipset (AD1848 codec + - ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on - how to compile it into the kernel or as a module see the file - <file:Documentation/sound/oss/PSS>. - - If you compile the driver into the kernel, you have to add - "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel - command line. - -config PSS_MIXER - bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)" - depends on SOUND_PSS - help - Answer Y for Beethoven ADSP-16. You may try to say Y also for other - cards if they have master volume, bass, treble, and you can't - control it under Linux. If you answer N for Beethoven ADSP-16, you - can't control master volume, bass, treble and synth volume. - - If you said M to "PSS support" above, you may enable or disable this - PSS mixer with the module parameter pss_mixer. For more information - see the file <file:Documentation/sound/oss/PSS>. - -config PSS_HAVE_BOOT - bool "Have DSPxxx.LD firmware file" - depends on SOUND_PSS && !STANDALONE - help - If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y - to include this file. Without this file the synth device (OPL) may - not work. - -config PSS_BOOT_FILE - string "Full pathname of DSPxxx.LD firmware file" - depends on PSS_HAVE_BOOT - default "/etc/sound/dsp001.ld" - help - Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file, - starting from /. - -config SOUND_SB - tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" - ---help--- - Answer Y if you have an original Sound Blaster card made by Creative - Labs or a 100% hardware compatible clone (like the Thunderboard or - SM Games). For an unknown card you may answer Y if the card claims - to be Sound Blaster-compatible. - - Please read the file <file:Documentation/sound/oss/Soundblaster>. - - You should also say Y here for cards based on the Avance Logic - ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and - for cards based on ESS chips (read - <file:Documentation/sound/oss/ESS1868> and - <file:Documentation/sound/oss/ESS>). If you have an IBM Mwave - card, say Y here and read <file:Documentation/sound/oss/mwave>. - - If you compile the driver into the kernel and don't want to use - isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel - command line. - - You can say M here to compile this driver as a module; the module is - called sb. - -config SOUND_YM3812 - tristate "Yamaha FM synthesizer (YM3812/OPL-3) support" - ---help--- - Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). - Answering Y is usually a safe and recommended choice, however some - cards may have software (TSR) FM emulation. Enabling FM support with - these cards may cause trouble (I don't currently know of any such - cards, however). Please read the file - <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip. - - If you compile the driver into the kernel, you have to add - "opl3=<io>" to the kernel command line. - - If unsure, say Y. - -config SOUND_UART6850 - tristate "6850 UART support" - help - This option enables support for MIDI interfaces based on the 6850 - UART chip. This interface is rarely found on sound cards. It's safe - to answer N to this question. - - If you compile the driver into the kernel, you have to add - "uart6850=<io>,<irq>" to the kernel command line. - -config SOUND_AEDSP16 - tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)" - ---help--- - Answer Y if you have a Gallant's Audio Excel DSP 16 card. This - driver supports Audio Excel DSP 16 but not the III nor PnP versions - of this card. - - The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or - a Microsoft Sound System card, so you should have said Y to either - "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" - or "Microsoft Sound System support", above, and you need to answer - the "MSS emulation" and "SBPro emulation" questions below - accordingly. You should say Y to one and only one of these two - questions. - - Read the <file:Documentation/sound/oss/README.OSS> file and the head of - <file:sound/oss/aedsp16.c> as well as - <file:Documentation/sound/oss/AudioExcelDSP16> to get more information - about this driver and its configuration. - -config SC6600 - bool "SC-6600 based audio cards (new Audio Excel DSP 16)" - depends on SOUND_AEDSP16 - help - The SC6600 is the new version of DSP mounted on the Audio Excel DSP - 16 cards. Find in the manual the FCC ID of your audio card and - answer Y if you have an SC6600 DSP. - -config SC6600_JOY - bool "Activate SC-6600 Joystick Interface" - depends on SC6600 - help - Say Y here in order to use the joystick interface of the Audio Excel - DSP 16 card. - -config SC6600_CDROM - int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)" - depends on SC6600 - default "4" - help - This is used to activate the CD-ROM interface of the Audio Excel - DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no - CD-ROM present. - -config SC6600_CDROMBASE - hex "SC-6600 CDROM Interface I/O Address" - depends on SC6600 - default "0" - help - Base I/O port address for the CD-ROM interface of the Audio Excel - DSP 16 card. - -config SOUND_VIDC - tristate "VIDC 16-bit sound" - depends on ARM && ARCH_ACORN - help - 16-bit support for the VIDC onboard sound hardware found on Acorn - machines. - -config SOUND_WAVEARTIST - tristate "Netwinder WaveArtist" - depends on ARM && ARCH_NETWINDER - help - Say Y here to include support for the Rockwell WaveArtist sound - system. This driver is mainly for the NetWinder. - -config SOUND_KAHLUA - tristate "XpressAudio Sound Blaster emulation" - depends on SOUND_SB - -endif # SOUND_OSS - diff --git a/sound/oss/Makefile b/sound/oss/Makefile deleted file mode 100644 index 9bdbbde2173e..000000000000 --- a/sound/oss/Makefile +++ /dev/null @@ -1,107 +0,0 @@ -# Makefile for the Linux sound card driver -# -# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net> -# Rewritten to use lists instead of if-statements. - -# Each configuration option enables a list of files. - -obj-$(CONFIG_SOUND_OSS) += sound.o - -# Please leave it as is, cause the link order is significant ! - -obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o -obj-$(CONFIG_SOUND_PSS) += pss.o ad1848.o mpu401.o -obj-$(CONFIG_SOUND_TRIX) += trix.o ad1848.o sb_lib.o uart401.o -obj-$(CONFIG_SOUND_MSS) += ad1848.o -obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o -obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o -obj-$(CONFIG_SOUND_KAHLUA) += kahlua.o -obj-$(CONFIG_SOUND_MPU401) += mpu401.o -obj-$(CONFIG_SOUND_UART6850) += uart6850.o -obj-$(CONFIG_SOUND_YM3812) += opl3.o -obj-$(CONFIG_SOUND_VMIDI) += v_midi.o -obj-$(CONFIG_SOUND_VIDC) += vidc_mod.o -obj-$(CONFIG_SOUND_WAVEARTIST) += waveartist.o -obj-$(CONFIG_SOUND_MSNDCLAS) += msnd.o msnd_classic.o -obj-$(CONFIG_SOUND_MSNDPIN) += msnd.o msnd_pinnacle.o -obj-$(CONFIG_SOUND_BCM_CS4297A) += swarm_cs4297a.o - -obj-$(CONFIG_DMASOUND) += dmasound/ - -# Declare multi-part drivers. - -sound-objs := \ - dev_table.o soundcard.o \ - audio.o dmabuf.o \ - midi_synth.o midibuf.o \ - sequencer.o sound_timer.o sys_timer.o - -pas2-objs := pas2_card.o pas2_midi.o pas2_mixer.o pas2_pcm.o -sb-objs := sb_card.o -sb_lib-objs := sb_common.o sb_audio.o sb_midi.o sb_mixer.o sb_ess.o -vidc_mod-objs := vidc.o vidc_fill.o - -hostprogs-y := bin2hex hex2hex - -# Files generated that shall be removed upon make clean -clean-files := msndperm.c msndinit.c pndsperm.c pndspini.c \ - pss_boot.h trix_boot.h - -# Firmware files that need translation -# -# The translated files are protected by a file that keeps track -# of what name was used to build them. If the name changes, they -# will be forced to be remade. -# - -# Turtle Beach MultiSound - -ifeq ($(CONFIG_MSNDCLAS_HAVE_BOOT),y) - $(obj)/msnd_classic.o: $(obj)/msndperm.c $(obj)/msndinit.c - - $(obj)/msndperm.c: $(patsubst "%", %, $(CONFIG_MSNDCLAS_PERM_FILE)) $(obj)/bin2hex - $(obj)/bin2hex msndperm < $< > $@ - - $(obj)/msndinit.c: $(patsubst "%", %, $(CONFIG_MSNDCLAS_INIT_FILE)) $(obj)/bin2hex - $(obj)/bin2hex msndinit < $< > $@ -endif - -ifeq ($(CONFIG_MSNDPIN_HAVE_BOOT),y) - $(obj)/msnd_pinnacle.o: $(obj)/pndsperm.c $(obj)/pndspini.c - - $(obj)/pndsperm.c: $(patsubst "%", %, $(CONFIG_MSNDPIN_PERM_FILE)) $(obj)/bin2hex - $(obj)/bin2hex pndsperm < $< > $@ - - $(obj)/pndspini.c: $(patsubst "%", %, $(CONFIG_MSNDPIN_INIT_FILE)) $(obj)/bin2hex - $(obj)/bin2hex pndspini < $< > $@ -endif - -# PSS (ECHO-ADI2111) - -$(obj)/pss.o: $(obj)/pss_boot.h - -ifeq ($(CONFIG_PSS_HAVE_BOOT),y) - $(obj)/pss_boot.h: $(patsubst "%", %, $(CONFIG_PSS_BOOT_FILE)) $(obj)/bin2hex - $(obj)/bin2hex pss_synth < $< > $@ -else - $(obj)/pss_boot.h: - $(Q)( \ - echo 'static unsigned char * pss_synth = NULL;'; \ - echo 'static int pss_synthLen = 0;'; \ - ) > $@ -endif - -# MediaTrix AudioTrix Pro - -$(obj)/trix.o: $(obj)/trix_boot.h - -ifeq ($(CONFIG_TRIX_HAVE_BOOT),y) - $(obj)/trix_boot.h: $(patsubst "%", %, $(CONFIG_TRIX_BOOT_FILE)) $(obj)/hex2hex - $(obj)/hex2hex -i trix_boot < $< > $@ -else - $(obj)/trix_boot.h: - $(Q)( \ - echo 'static unsigned char * trix_boot = NULL;'; \ - echo 'static int trix_boot_len = 0;'; \ - ) > $@ -endif diff --git a/sound/oss/README.FIRST b/sound/oss/README.FIRST deleted file mode 100644 index 90fdcf063d2d..000000000000 --- a/sound/oss/README.FIRST +++ /dev/null @@ -1,6 +0,0 @@ -The modular sound driver patches were funded by Red Hat Software -(www.redhat.com). The sound driver here is thus a modified version of -Hannu's code. Please bear that in mind when considering the appropriate -forums for bug reporting. - -Alan Cox diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c deleted file mode 100644 index 2421f59cf279..000000000000 --- a/sound/oss/ad1848.c +++ /dev/null @@ -1,3062 +0,0 @@ -/* - * sound/oss/ad1848.c - * - * The low level driver for the AD1848/CS4248 codec chip which - * is used for example in the MS Sound System. - * - * The CS4231 which is used in the GUS MAX and some other cards is - * upwards compatible with AD1848 and this driver is able to drive it. - * - * CS4231A and AD1845 are upward compatible with CS4231. However - * the new features of these chips are different. - * - * CS4232 is a PnP audio chip which contains a CS4231A (and SB, MPU). - * CS4232A is an improved version of CS4232. - * - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * general sleep/wakeup clean up. - * Alan Cox : reformatted. Fixed SMP bugs. Moved to kernel alloc/free - * of irqs. Use dev_id. - * Christoph Hellwig : adapted to module_init/module_exit - * Aki Laukkanen : added power management support - * Arnaldo C. de Melo : added missing restore_flags in ad1848_resume - * Miguel Freitas : added ISA PnP support - * Alan Cox : Added CS4236->4239 identification - * Daniel T. Cobra : Alernate config/mixer for later chips - * Alan Cox : Merged chip idents and config code - * - * TODO - * APM save restore assist code on IBM thinkpad - * - * Status: - * Tested. Believed fully functional. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/stddef.h> -#include <linux/slab.h> -#include <linux/isapnp.h> -#include <linux/pnp.h> -#include <linux/spinlock.h> - -#include "sound_config.h" - -#include "ad1848.h" -#include "ad1848_mixer.h" - -typedef struct -{ - spinlock_t lock; - int base; - int irq; - int dma1, dma2; - int dual_dma; /* 1, when two DMA channels allocated */ - int subtype; - unsigned char MCE_bit; - unsigned char saved_regs[64]; /* Includes extended register space */ - int debug_flag; - - int audio_flags; - int record_dev, playback_dev; - - int xfer_count; - int audio_mode; - int open_mode; - int intr_active; - char *chip_name, *name; - int model; -#define MD_1848 1 -#define MD_4231 2 -#define MD_4231A 3 -#define MD_1845 4 -#define MD_4232 5 -#define MD_C930 6 -#define MD_IWAVE 7 -#define MD_4235 8 /* Crystal Audio CS4235 */ -#define MD_1845_SSCAPE 9 /* Ensoniq Soundscape PNP*/ -#define MD_4236 10 /* 4236 and higher */ -#define MD_42xB 11 /* CS 42xB */ -#define MD_4239 12 /* CS4239 */ - - /* Mixer parameters */ - int recmask; - int supported_devices, orig_devices; - int supported_rec_devices, orig_rec_devices; - int *levels; - short mixer_reroute[32]; - int dev_no; - volatile unsigned long timer_ticks; - int timer_running; - int irq_ok; - mixer_ents *mix_devices; - int mixer_output_port; -} ad1848_info; - -typedef struct ad1848_port_info -{ - int open_mode; - int speed; - unsigned char speed_bits; - int channels; - int audio_format; - unsigned char format_bits; -} -ad1848_port_info; - -static struct address_info cfg; -static int nr_ad1848_devs; - -static bool deskpro_xl; -static bool deskpro_m; -static bool soundpro; - -#ifndef EXCLUDE_TIMERS -static int timer_installed = -1; -#endif - -static int loaded; - -static int ad_format_mask[13 /*devc->model */ ] = -{ - 0, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, /* AD1845 */ - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE /* CS4235 */, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW /* Ensoniq Soundscape*/, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM, - AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM -}; - -static ad1848_info adev_info[MAX_AUDIO_DEV]; - -#define io_Index_Addr(d) ((d)->base) -#define io_Indexed_Data(d) ((d)->base+1) -#define io_Status(d) ((d)->base+2) -#define io_Polled_IO(d) ((d)->base+3) - -static struct { - unsigned char flags; -#define CAP_F_TIMER 0x01 -} capabilities [10 /*devc->model */ ] = { - {0} - ,{0} /* MD_1848 */ - ,{CAP_F_TIMER} /* MD_4231 */ - ,{CAP_F_TIMER} /* MD_4231A */ - ,{CAP_F_TIMER} /* MD_1845 */ - ,{CAP_F_TIMER} /* MD_4232 */ - ,{0} /* MD_C930 */ - ,{CAP_F_TIMER} /* MD_IWAVE */ - ,{0} /* MD_4235 */ - ,{CAP_F_TIMER} /* MD_1845_SSCAPE */ -}; - -#ifdef CONFIG_PNP -static int isapnp = 1; -static int isapnpjump; -static bool reverse; - -static int audio_activated; -#else -static int isapnp; -#endif - - - -static int ad1848_open(int dev, int mode); -static void ad1848_close(int dev); -static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag); -static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag); -static int ad1848_prepare_for_output(int dev, int bsize, int bcount); -static int ad1848_prepare_for_input(int dev, int bsize, int bcount); -static void ad1848_halt(int dev); -static void ad1848_halt_input(int dev); -static void ad1848_halt_output(int dev); -static void ad1848_trigger(int dev, int bits); -static irqreturn_t adintr(int irq, void *dev_id); - -#ifndef EXCLUDE_TIMERS -static int ad1848_tmr_install(int dev); -static void ad1848_tmr_reprogram(int dev); -#endif - -static int ad_read(ad1848_info * devc, int reg) -{ - int x; - int timeout = 900000; - - while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */ - timeout--; - - if(reg < 32) - { - outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); - x = inb(io_Indexed_Data(devc)); - } - else - { - int xreg, xra; - - xreg = (reg & 0xff) - 32; - xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2); - outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); - outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc)); - x = inb(io_Indexed_Data(devc)); - } - - return x; -} - -static void ad_write(ad1848_info * devc, int reg, int data) -{ - int timeout = 900000; - - while (timeout > 0 && inb(devc->base) == 0x80) /* Are we initializing */ - timeout--; - - if(reg < 32) - { - outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); - outb(((unsigned char) (data & 0xff)), io_Indexed_Data(devc)); - } - else - { - int xreg, xra; - - xreg = (reg & 0xff) - 32; - xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2); - outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc)); - outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc)); - outb((unsigned char) (data & 0xff), io_Indexed_Data(devc)); - } -} - -static void wait_for_calibration(ad1848_info * devc) -{ - int timeout; - - /* - * Wait until the auto calibration process has finished. - * - * 1) Wait until the chip becomes ready (reads don't return 0x80). - * 2) Wait until the ACI bit of I11 gets on and then off. - */ - - timeout = 100000; - while (timeout > 0 && inb(devc->base) == 0x80) - timeout--; - if (inb(devc->base) & 0x80) - printk(KERN_WARNING "ad1848: Auto calibration timed out(1).\n"); - - timeout = 100; - while (timeout > 0 && !(ad_read(devc, 11) & 0x20)) - timeout--; - if (!(ad_read(devc, 11) & 0x20)) - return; - - timeout = 80000; - while (timeout > 0 && (ad_read(devc, 11) & 0x20)) - timeout--; - if (ad_read(devc, 11) & 0x20) - if ((devc->model != MD_1845) && (devc->model != MD_1845_SSCAPE)) - printk(KERN_WARNING "ad1848: Auto calibration timed out(3).\n"); -} - -static void ad_mute(ad1848_info * devc) -{ - int i; - unsigned char prev; - - /* - * Save old register settings and mute output channels - */ - - for (i = 6; i < 8; i++) - { - prev = devc->saved_regs[i] = ad_read(devc, i); - } - -} - -static void ad_unmute(ad1848_info * devc) -{ -} - -static void ad_enter_MCE(ad1848_info * devc) -{ - int timeout = 1000; - unsigned short prev; - - while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */ - timeout--; - - devc->MCE_bit = 0x40; - prev = inb(io_Index_Addr(devc)); - if (prev & 0x40) - { - return; - } - outb((devc->MCE_bit), io_Index_Addr(devc)); -} - -static void ad_leave_MCE(ad1848_info * devc) -{ - unsigned char prev, acal; - int timeout = 1000; - - while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */ - timeout--; - - acal = ad_read(devc, 9); - - devc->MCE_bit = 0x00; - prev = inb(io_Index_Addr(devc)); - outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */ - - if ((prev & 0x40) == 0) /* Not in MCE mode */ - { - return; - } - outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */ - if (acal & 0x08) /* Auto calibration is enabled */ - wait_for_calibration(devc); -} - -static int ad1848_set_recmask(ad1848_info * devc, int mask) -{ - unsigned char recdev; - int i, n; - unsigned long flags; - - mask &= devc->supported_rec_devices; - - /* Rename the mixer bits if necessary */ - for (i = 0; i < 32; i++) - { - if (devc->mixer_reroute[i] != i) - { - if (mask & (1 << i)) - { - mask &= ~(1 << i); - mask |= (1 << devc->mixer_reroute[i]); - } - } - } - - n = 0; - for (i = 0; i < 32; i++) /* Count selected device bits */ - if (mask & (1 << i)) - n++; - - spin_lock_irqsave(&devc->lock,flags); - if (!soundpro) { - if (n == 0) - mask = SOUND_MASK_MIC; - else if (n != 1) { /* Too many devices selected */ - mask &= ~devc->recmask; /* Filter out active settings */ - - n = 0; - for (i = 0; i < 32; i++) /* Count selected device bits */ - if (mask & (1 << i)) - n++; - - if (n != 1) - mask = SOUND_MASK_MIC; - } - switch (mask) { - case SOUND_MASK_MIC: - recdev = 2; - break; - - case SOUND_MASK_LINE: - case SOUND_MASK_LINE3: - recdev = 0; - break; - - case SOUND_MASK_CD: - case SOUND_MASK_LINE1: - recdev = 1; - break; - - case SOUND_MASK_IMIX: - recdev = 3; - break; - - default: - mask = SOUND_MASK_MIC; - recdev = 2; - } - - recdev <<= 6; - ad_write(devc, 0, (ad_read(devc, 0) & 0x3f) | recdev); - ad_write(devc, 1, (ad_read(devc, 1) & 0x3f) | recdev); - } else { /* soundpro */ - unsigned char val; - int set_rec_bit; - int j; - - for (i = 0; i < 32; i++) { /* For each bit */ - if ((devc->supported_rec_devices & (1 << i)) == 0) - continue; /* Device not supported */ - - for (j = LEFT_CHN; j <= RIGHT_CHN; j++) { - if (devc->mix_devices[i][j].nbits == 0) /* Inexistent channel */ - continue; - - /* - * This is tricky: - * set_rec_bit becomes 1 if the corresponding bit in mask is set - * then it gets flipped if the polarity is inverse - */ - set_rec_bit = ((mask & (1 << i)) != 0) ^ devc->mix_devices[i][j].recpol; - - val = ad_read(devc, devc->mix_devices[i][j].recreg); - val &= ~(1 << devc->mix_devices[i][j].recpos); - val |= (set_rec_bit << devc->mix_devices[i][j].recpos); - ad_write(devc, devc->mix_devices[i][j].recreg, val); - } - } - } - spin_unlock_irqrestore(&devc->lock,flags); - - /* Rename the mixer bits back if necessary */ - for (i = 0; i < 32; i++) - { - if (devc->mixer_reroute[i] != i) - { - if (mask & (1 << devc->mixer_reroute[i])) - { - mask &= ~(1 << devc->mixer_reroute[i]); - mask |= (1 << i); - } - } - } - devc->recmask = mask; - return mask; -} - -static void oss_change_bits(ad1848_info *devc, unsigned char *regval, - unsigned char *muteval, int dev, int chn, int newval) -{ - unsigned char mask; - int shift; - int mute; - int mutemask; - int set_mute_bit; - - set_mute_bit = (newval == 0) ^ devc->mix_devices[dev][chn].mutepol; - - if (devc->mix_devices[dev][chn].polarity == 1) /* Reverse */ - newval = 100 - newval; - - mask = (1 << devc->mix_devices[dev][chn].nbits) - 1; - shift = devc->mix_devices[dev][chn].bitpos; - - if (devc->mix_devices[dev][chn].mutepos == 8) - { /* if there is no mute bit */ - mute = 0; /* No mute bit; do nothing special */ - mutemask = ~0; /* No mute bit; do nothing special */ - } - else - { - mute = (set_mute_bit << devc->mix_devices[dev][chn].mutepos); - mutemask = ~(1 << devc->mix_devices[dev][chn].mutepos); - } - - newval = (int) ((newval * mask) + 50) / 100; /* Scale it */ - *regval &= ~(mask << shift); /* Clear bits */ - *regval |= (newval & mask) << shift; /* Set new value */ - - *muteval &= mutemask; - *muteval |= mute; -} - -static int ad1848_mixer_get(ad1848_info * devc, int dev) -{ - if (!((1 << dev) & devc->supported_devices)) - return -EINVAL; - - dev = devc->mixer_reroute[dev]; - - return devc->levels[dev]; -} - -static void ad1848_mixer_set_channel(ad1848_info *devc, int dev, int value, int channel) -{ - int regoffs, muteregoffs; - unsigned char val, muteval; - unsigned long flags; - - regoffs = devc->mix_devices[dev][channel].regno; - muteregoffs = devc->mix_devices[dev][channel].mutereg; - val = ad_read(devc, regoffs); - - if (muteregoffs != regoffs) { - muteval = ad_read(devc, muteregoffs); - oss_change_bits(devc, &val, &muteval, dev, channel, value); - } - else - oss_change_bits(devc, &val, &val, dev, channel, value); - - spin_lock_irqsave(&devc->lock,flags); - ad_write(devc, regoffs, val); - devc->saved_regs[regoffs] = val; - if (muteregoffs != regoffs) { - ad_write(devc, muteregoffs, muteval); - devc->saved_regs[muteregoffs] = muteval; - } - spin_unlock_irqrestore(&devc->lock,flags); -} - -static int ad1848_mixer_set(ad1848_info * devc, int dev, int value) -{ - int left = value & 0x000000ff; - int right = (value & 0x0000ff00) >> 8; - int retvol; - - if (dev > 31) - return -EINVAL; - - if (!(devc->supported_devices & (1 << dev))) - return -EINVAL; - - dev = devc->mixer_reroute[dev]; - - if (devc->mix_devices[dev][LEFT_CHN].nbits == 0) - return -EINVAL; - - if (left > 100) - left = 100; - if (right > 100) - right = 100; - - if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0) /* Mono control */ - right = left; - - retvol = left | (right << 8); - - /* Scale volumes */ - left = mix_cvt[left]; - right = mix_cvt[right]; - - devc->levels[dev] = retvol; - - /* - * Set the left channel - */ - ad1848_mixer_set_channel(devc, dev, left, LEFT_CHN); - - /* - * Set the right channel - */ - if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0) - goto out; - ad1848_mixer_set_channel(devc, dev, right, RIGHT_CHN); - - out: - return retvol; -} - -static void ad1848_mixer_reset(ad1848_info * devc) -{ - int i; - char name[32]; - unsigned long flags; - - devc->mix_devices = &(ad1848_mix_devices[0]); - - sprintf(name, "%s_%d", devc->chip_name, nr_ad1848_devs); - - for (i = 0; i < 32; i++) - devc->mixer_reroute[i] = i; - - devc->supported_rec_devices = MODE1_REC_DEVICES; - - switch (devc->model) - { - case MD_4231: - case MD_4231A: - case MD_1845: - case MD_1845_SSCAPE: - devc->supported_devices = MODE2_MIXER_DEVICES; - break; - - case MD_C930: - devc->supported_devices = C930_MIXER_DEVICES; - devc->mix_devices = &(c930_mix_devices[0]); - break; - - case MD_IWAVE: - devc->supported_devices = MODE3_MIXER_DEVICES; - devc->mix_devices = &(iwave_mix_devices[0]); - break; - - case MD_42xB: - case MD_4239: - devc->mix_devices = &(cs42xb_mix_devices[0]); - devc->supported_devices = MODE3_MIXER_DEVICES; - break; - case MD_4232: - case MD_4235: - case MD_4236: - devc->supported_devices = MODE3_MIXER_DEVICES; - break; - - case MD_1848: - if (soundpro) { - devc->supported_devices = SPRO_MIXER_DEVICES; - devc->supported_rec_devices = SPRO_REC_DEVICES; - devc->mix_devices = &(spro_mix_devices[0]); - break; - } - - default: - devc->supported_devices = MODE1_MIXER_DEVICES; - } - - devc->orig_devices = devc->supported_devices; - devc->orig_rec_devices = devc->supported_rec_devices; - - devc->levels = load_mixer_volumes(name, default_mixer_levels, 1); - - for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) - { - if (devc->supported_devices & (1 << i)) - ad1848_mixer_set(devc, i, devc->levels[i]); - } - - ad1848_set_recmask(devc, SOUND_MASK_MIC); - - devc->mixer_output_port = devc->levels[31] | AUDIO_HEADPHONE | AUDIO_LINE_OUT; - - spin_lock_irqsave(&devc->lock,flags); - if (!soundpro) { - if (devc->mixer_output_port & AUDIO_SPEAKER) - ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */ - else - ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */ - } else { - /* - * From the "wouldn't it be nice if the mixer API had (better) - * support for custom stuff" category - */ - /* Enable surround mode and SB16 mixer */ - ad_write(devc, 16, 0x60); - } - spin_unlock_irqrestore(&devc->lock,flags); -} - -static int ad1848_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - ad1848_info *devc = mixer_devs[dev]->devc; - int val; - - if (cmd == SOUND_MIXER_PRIVATE1) - { - if (get_user(val, (int __user *)arg)) - return -EFAULT; - - if (val != 0xffff) - { - unsigned long flags; - val &= (AUDIO_SPEAKER | AUDIO_HEADPHONE | AUDIO_LINE_OUT); - devc->mixer_output_port = val; - val |= AUDIO_HEADPHONE | AUDIO_LINE_OUT; /* Always on */ - devc->mixer_output_port = val; - spin_lock_irqsave(&devc->lock,flags); - if (val & AUDIO_SPEAKER) - ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */ - else - ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */ - spin_unlock_irqrestore(&devc->lock,flags); - } - val = devc->mixer_output_port; - return put_user(val, (int __user *)arg); - } - if (cmd == SOUND_MIXER_PRIVATE2) - { - if (get_user(val, (int __user *)arg)) - return -EFAULT; - return(ad1848_control(AD1848_MIXER_REROUTE, val)); - } - if (((cmd >> 8) & 0xff) == 'M') - { - if (_SIOC_DIR(cmd) & _SIOC_WRITE) - { - switch (cmd & 0xff) - { - case SOUND_MIXER_RECSRC: - if (get_user(val, (int __user *)arg)) - return -EFAULT; - val = ad1848_set_recmask(devc, val); - break; - - default: - if (get_user(val, (int __user *)arg)) - return -EFAULT; - val = ad1848_mixer_set(devc, cmd & 0xff, val); - break; - } - return put_user(val, (int __user *)arg); - } - else - { - switch (cmd & 0xff) - { - /* - * Return parameters - */ - - case SOUND_MIXER_RECSRC: - val = devc->recmask; - break; - - case SOUND_MIXER_DEVMASK: - val = devc->supported_devices; - break; - - case SOUND_MIXER_STEREODEVS: - val = devc->supported_devices; - if (devc->model != MD_C930) - val &= ~(SOUND_MASK_SPEAKER | SOUND_MASK_IMIX); - break; - - case SOUND_MIXER_RECMASK: - val = devc->supported_rec_devices; - break; - - case SOUND_MIXER_CAPS: - val=SOUND_CAP_EXCL_INPUT; - break; - - default: - val = ad1848_mixer_get(devc, cmd & 0xff); - break; - } - return put_user(val, (int __user *)arg); - } - } - else - return -EINVAL; -} - -static int ad1848_set_speed(int dev, int arg) -{ - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - /* - * The sampling speed is encoded in the least significant nibble of I8. The - * LSB selects the clock source (0=24.576 MHz, 1=16.9344 MHz) and other - * three bits select the divisor (indirectly): - * - * The available speeds are in the following table. Keep the speeds in - * the increasing order. - */ - typedef struct - { - int speed; - unsigned char bits; - } - speed_struct; - - static speed_struct speed_table[] = - { - {5510, (0 << 1) | 1}, - {5510, (0 << 1) | 1}, - {6620, (7 << 1) | 1}, - {8000, (0 << 1) | 0}, - {9600, (7 << 1) | 0}, - {11025, (1 << 1) | 1}, - {16000, (1 << 1) | 0}, - {18900, (2 << 1) | 1}, - {22050, (3 << 1) | 1}, - {27420, (2 << 1) | 0}, - {32000, (3 << 1) | 0}, - {33075, (6 << 1) | 1}, - {37800, (4 << 1) | 1}, - {44100, (5 << 1) | 1}, - {48000, (6 << 1) | 0} - }; - - int i, n, selected = -1; - - n = sizeof(speed_table) / sizeof(speed_struct); - - if (arg <= 0) - return portc->speed; - - if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* AD1845 has different timer than others */ - { - if (arg < 4000) - arg = 4000; - if (arg > 50000) - arg = 50000; - - portc->speed = arg; - portc->speed_bits = speed_table[3].bits; - return portc->speed; - } - if (arg < speed_table[0].speed) - selected = 0; - if (arg > speed_table[n - 1].speed) - selected = n - 1; - - for (i = 1 /*really */ ; selected == -1 && i < n; i++) - { - if (speed_table[i].speed == arg) - selected = i; - else if (speed_table[i].speed > arg) - { - int diff1, diff2; - - diff1 = arg - speed_table[i - 1].speed; - diff2 = speed_table[i].speed - arg; - - if (diff1 < diff2) - selected = i - 1; - else - selected = i; - } - } - if (selected == -1) - { - printk(KERN_WARNING "ad1848: Can't find speed???\n"); - selected = 3; - } - portc->speed = speed_table[selected].speed; - portc->speed_bits = speed_table[selected].bits; - return portc->speed; -} - -static short ad1848_set_channels(int dev, short arg) -{ - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - if (arg != 1 && arg != 2) - return portc->channels; - - portc->channels = arg; - return arg; -} - -static unsigned int ad1848_set_bits(int dev, unsigned int arg) -{ - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - static struct format_tbl - { - int format; - unsigned char bits; - } - format2bits[] = - { - { - 0, 0 - } - , - { - AFMT_MU_LAW, 1 - } - , - { - AFMT_A_LAW, 3 - } - , - { - AFMT_IMA_ADPCM, 5 - } - , - { - AFMT_U8, 0 - } - , - { - AFMT_S16_LE, 2 - } - , - { - AFMT_S16_BE, 6 - } - , - { - AFMT_S8, 0 - } - , - { - AFMT_U16_LE, 0 - } - , - { - AFMT_U16_BE, 0 - } - }; - int i, n = sizeof(format2bits) / sizeof(struct format_tbl); - - if (arg == 0) - return portc->audio_format; - - if (!(arg & ad_format_mask[devc->model])) - arg = AFMT_U8; - - portc->audio_format = arg; - - for (i = 0; i < n; i++) - if (format2bits[i].format == arg) - { - if ((portc->format_bits = format2bits[i].bits) == 0) - return portc->audio_format = AFMT_U8; /* Was not supported */ - - return arg; - } - /* Still hanging here. Something must be terribly wrong */ - portc->format_bits = 0; - return portc->audio_format = AFMT_U8; -} - -static struct audio_driver ad1848_audio_driver = -{ - .owner = THIS_MODULE, - .open = ad1848_open, - .close = ad1848_close, - .output_block = ad1848_output_block, - .start_input = ad1848_start_input, - .prepare_for_input = ad1848_prepare_for_input, - .prepare_for_output = ad1848_prepare_for_output, - .halt_io = ad1848_halt, - .halt_input = ad1848_halt_input, - .halt_output = ad1848_halt_output, - .trigger = ad1848_trigger, - .set_speed = ad1848_set_speed, - .set_bits = ad1848_set_bits, - .set_channels = ad1848_set_channels -}; - -static struct mixer_operations ad1848_mixer_operations = -{ - .owner = THIS_MODULE, - .id = "SOUNDPORT", - .name = "AD1848/CS4248/CS4231", - .ioctl = ad1848_mixer_ioctl -}; - -static int ad1848_open(int dev, int mode) -{ - ad1848_info *devc; - ad1848_port_info *portc; - unsigned long flags; - - if (dev < 0 || dev >= num_audiodevs) - return -ENXIO; - - devc = (ad1848_info *) audio_devs[dev]->devc; - portc = (ad1848_port_info *) audio_devs[dev]->portc; - - /* here we don't have to protect against intr */ - spin_lock(&devc->lock); - if (portc->open_mode || (devc->open_mode & mode)) - { - spin_unlock(&devc->lock); - return -EBUSY; - } - devc->dual_dma = 0; - - if (audio_devs[dev]->flags & DMA_DUPLEX) - { - devc->dual_dma = 1; - } - devc->intr_active = 0; - devc->audio_mode = 0; - devc->open_mode |= mode; - portc->open_mode = mode; - spin_unlock(&devc->lock); - ad1848_trigger(dev, 0); - - if (mode & OPEN_READ) - devc->record_dev = dev; - if (mode & OPEN_WRITE) - devc->playback_dev = dev; -/* - * Mute output until the playback really starts. This decreases clicking (hope so). - */ - spin_lock_irqsave(&devc->lock,flags); - ad_mute(devc); - spin_unlock_irqrestore(&devc->lock,flags); - - return 0; -} - -static void ad1848_close(int dev) -{ - unsigned long flags; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - devc->intr_active = 0; - ad1848_halt(dev); - - spin_lock_irqsave(&devc->lock,flags); - - devc->audio_mode = 0; - devc->open_mode &= ~portc->open_mode; - portc->open_mode = 0; - - ad_unmute(devc); - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag) -{ - unsigned long flags, cnt; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - cnt = count; - - if (portc->audio_format == AFMT_IMA_ADPCM) - { - cnt /= 4; - } - else - { - if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */ - cnt >>= 1; - } - if (portc->channels > 1) - cnt >>= 1; - cnt--; - - if ((devc->audio_mode & PCM_ENABLE_OUTPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) && - intrflag && - cnt == devc->xfer_count) - { - devc->audio_mode |= PCM_ENABLE_OUTPUT; - devc->intr_active = 1; - return; /* - * Auto DMA mode on. No need to react - */ - } - spin_lock_irqsave(&devc->lock,flags); - - ad_write(devc, 15, (unsigned char) (cnt & 0xff)); - ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff)); - - devc->xfer_count = cnt; - devc->audio_mode |= PCM_ENABLE_OUTPUT; - devc->intr_active = 1; - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag) -{ - unsigned long flags, cnt; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - cnt = count; - if (portc->audio_format == AFMT_IMA_ADPCM) - { - cnt /= 4; - } - else - { - if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */ - cnt >>= 1; - } - if (portc->channels > 1) - cnt >>= 1; - cnt--; - - if ((devc->audio_mode & PCM_ENABLE_INPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) && - intrflag && - cnt == devc->xfer_count) - { - devc->audio_mode |= PCM_ENABLE_INPUT; - devc->intr_active = 1; - return; /* - * Auto DMA mode on. No need to react - */ - } - spin_lock_irqsave(&devc->lock,flags); - - if (devc->model == MD_1848) - { - ad_write(devc, 15, (unsigned char) (cnt & 0xff)); - ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff)); - } - else - { - ad_write(devc, 31, (unsigned char) (cnt & 0xff)); - ad_write(devc, 30, (unsigned char) ((cnt >> 8) & 0xff)); - } - - ad_unmute(devc); - - devc->xfer_count = cnt; - devc->audio_mode |= PCM_ENABLE_INPUT; - devc->intr_active = 1; - spin_unlock_irqrestore(&devc->lock,flags); -} - -static int ad1848_prepare_for_output(int dev, int bsize, int bcount) -{ - int timeout; - unsigned char fs, old_fs, tmp = 0; - unsigned long flags; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - ad_mute(devc); - - spin_lock_irqsave(&devc->lock,flags); - fs = portc->speed_bits | (portc->format_bits << 5); - - if (portc->channels > 1) - fs |= 0x10; - - ad_enter_MCE(devc); /* Enables changes to the format select reg */ - - if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* Use alternate speed select registers */ - { - fs &= 0xf0; /* Mask off the rate select bits */ - - ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */ - ad_write(devc, 23, portc->speed & 0xff); /* Speed LSB */ - } - old_fs = ad_read(devc, 8); - - if (devc->model == MD_4232 || devc->model >= MD_4236) - { - tmp = ad_read(devc, 16); - ad_write(devc, 16, tmp | 0x30); - } - if (devc->model == MD_IWAVE) - ad_write(devc, 17, 0xc2); /* Disable variable frequency select */ - - ad_write(devc, 8, fs); - - /* - * Write to I8 starts resynchronization. Wait until it completes. - */ - - timeout = 0; - while (timeout < 100 && inb(devc->base) != 0x80) - timeout++; - timeout = 0; - while (timeout < 10000 && inb(devc->base) == 0x80) - timeout++; - - if (devc->model >= MD_4232) - ad_write(devc, 16, tmp & ~0x30); - - ad_leave_MCE(devc); /* - * Starts the calibration process. - */ - spin_unlock_irqrestore(&devc->lock,flags); - devc->xfer_count = 0; - -#ifndef EXCLUDE_TIMERS - if (dev == timer_installed && devc->timer_running) - if ((fs & 0x01) != (old_fs & 0x01)) - { - ad1848_tmr_reprogram(dev); - } -#endif - ad1848_halt_output(dev); - return 0; -} - -static int ad1848_prepare_for_input(int dev, int bsize, int bcount) -{ - int timeout; - unsigned char fs, old_fs, tmp = 0; - unsigned long flags; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - if (devc->audio_mode) - return 0; - - spin_lock_irqsave(&devc->lock,flags); - fs = portc->speed_bits | (portc->format_bits << 5); - - if (portc->channels > 1) - fs |= 0x10; - - ad_enter_MCE(devc); /* Enables changes to the format select reg */ - - if ((devc->model == MD_1845) || (devc->model == MD_1845_SSCAPE)) /* Use alternate speed select registers */ - { - fs &= 0xf0; /* Mask off the rate select bits */ - - ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */ - ad_write(devc, 23, portc->speed & 0xff); /* Speed LSB */ - } - if (devc->model == MD_4232) - { - tmp = ad_read(devc, 16); - ad_write(devc, 16, tmp | 0x30); - } - if (devc->model == MD_IWAVE) - ad_write(devc, 17, 0xc2); /* Disable variable frequency select */ - - /* - * If mode >= 2 (CS4231), set I28. It's the capture format register. - */ - - if (devc->model != MD_1848) - { - old_fs = ad_read(devc, 28); - ad_write(devc, 28, fs); - - /* - * Write to I28 starts resynchronization. Wait until it completes. - */ - - timeout = 0; - while (timeout < 100 && inb(devc->base) != 0x80) - timeout++; - - timeout = 0; - while (timeout < 10000 && inb(devc->base) == 0x80) - timeout++; - - if (devc->model != MD_1848 && devc->model != MD_1845 && devc->model != MD_1845_SSCAPE) - { - /* - * CS4231 compatible devices don't have separate sampling rate selection - * register for recording an playback. The I8 register is shared so we have to - * set the speed encoding bits of it too. - */ - unsigned char tmp = portc->speed_bits | (ad_read(devc, 8) & 0xf0); - - ad_write(devc, 8, tmp); - /* - * Write to I8 starts resynchronization. Wait until it completes. - */ - timeout = 0; - while (timeout < 100 && inb(devc->base) != 0x80) - timeout++; - - timeout = 0; - while (timeout < 10000 && inb(devc->base) == 0x80) - timeout++; - } - } - else - { /* For AD1848 set I8. */ - - old_fs = ad_read(devc, 8); - ad_write(devc, 8, fs); - /* - * Write to I8 starts resynchronization. Wait until it completes. - */ - timeout = 0; - while (timeout < 100 && inb(devc->base) != 0x80) - timeout++; - timeout = 0; - while (timeout < 10000 && inb(devc->base) == 0x80) - timeout++; - } - - if (devc->model == MD_4232) - ad_write(devc, 16, tmp & ~0x30); - - ad_leave_MCE(devc); /* - * Starts the calibration process. - */ - spin_unlock_irqrestore(&devc->lock,flags); - devc->xfer_count = 0; - -#ifndef EXCLUDE_TIMERS - if (dev == timer_installed && devc->timer_running) - { - if ((fs & 0x01) != (old_fs & 0x01)) - { - ad1848_tmr_reprogram(dev); - } - } -#endif - ad1848_halt_input(dev); - return 0; -} - -static void ad1848_halt(int dev) -{ - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - - unsigned char bits = ad_read(devc, 9); - - if (bits & 0x01 && (portc->open_mode & OPEN_WRITE)) - ad1848_halt_output(dev); - - if (bits & 0x02 && (portc->open_mode & OPEN_READ)) - ad1848_halt_input(dev); - devc->audio_mode = 0; -} - -static void ad1848_halt_input(int dev) -{ - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - unsigned long flags; - - if (!(ad_read(devc, 9) & 0x02)) - return; /* Capture not enabled */ - - spin_lock_irqsave(&devc->lock,flags); - - ad_mute(devc); - - { - int tmout; - - if(!isa_dma_bridge_buggy) - disable_dma(audio_devs[dev]->dmap_in->dma); - - for (tmout = 0; tmout < 100000; tmout++) - if (ad_read(devc, 11) & 0x10) - break; - ad_write(devc, 9, ad_read(devc, 9) & ~0x02); /* Stop capture */ - - if(!isa_dma_bridge_buggy) - enable_dma(audio_devs[dev]->dmap_in->dma); - devc->audio_mode &= ~PCM_ENABLE_INPUT; - } - - outb(0, io_Status(devc)); /* Clear interrupt status */ - outb(0, io_Status(devc)); /* Clear interrupt status */ - - devc->audio_mode &= ~PCM_ENABLE_INPUT; - - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void ad1848_halt_output(int dev) -{ - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - unsigned long flags; - - if (!(ad_read(devc, 9) & 0x01)) - return; /* Playback not enabled */ - - spin_lock_irqsave(&devc->lock,flags); - - ad_mute(devc); - { - int tmout; - - if(!isa_dma_bridge_buggy) - disable_dma(audio_devs[dev]->dmap_out->dma); - - for (tmout = 0; tmout < 100000; tmout++) - if (ad_read(devc, 11) & 0x10) - break; - ad_write(devc, 9, ad_read(devc, 9) & ~0x01); /* Stop playback */ - - if(!isa_dma_bridge_buggy) - enable_dma(audio_devs[dev]->dmap_out->dma); - - devc->audio_mode &= ~PCM_ENABLE_OUTPUT; - } - - outb((0), io_Status(devc)); /* Clear interrupt status */ - outb((0), io_Status(devc)); /* Clear interrupt status */ - - devc->audio_mode &= ~PCM_ENABLE_OUTPUT; - - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void ad1848_trigger(int dev, int state) -{ - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc; - unsigned long flags; - unsigned char tmp, old; - - spin_lock_irqsave(&devc->lock,flags); - state &= devc->audio_mode; - - tmp = old = ad_read(devc, 9); - - if (portc->open_mode & OPEN_READ) - { - if (state & PCM_ENABLE_INPUT) - tmp |= 0x02; - else - tmp &= ~0x02; - } - if (portc->open_mode & OPEN_WRITE) - { - if (state & PCM_ENABLE_OUTPUT) - tmp |= 0x01; - else - tmp &= ~0x01; - } - /* ad_mute(devc); */ - if (tmp != old) - { - ad_write(devc, 9, tmp); - ad_unmute(devc); - } - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void ad1848_init_hw(ad1848_info * devc) -{ - int i; - int *init_values; - - /* - * Initial values for the indirect registers of CS4248/AD1848. - */ - static int init_values_a[] = - { - 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, - 0x00, 0x0c, 0x02, 0x00, 0x8a, 0x01, 0x00, 0x00, - - /* Positions 16 to 31 just for CS4231/2 and ad1845 */ - 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 - }; - - static int init_values_b[] = - { - /* - Values for the newer chips - Some of the register initialization values were changed. In - order to get rid of the click that preceded PCM playback, - calibration was disabled on the 10th byte. On that same byte, - dual DMA was enabled; on the 11th byte, ADC dithering was - enabled, since that is theoretically desirable; on the 13th - byte, Mode 3 was selected, to enable access to extended - registers. - */ - 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x00, 0xe0, 0x01, 0x00, 0x00, - 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 - }; - - /* - * Select initialisation data - */ - - init_values = init_values_a; - if(devc->model >= MD_4236) - init_values = init_values_b; - - for (i = 0; i < 16; i++) - ad_write(devc, i, init_values[i]); - - - ad_mute(devc); /* Initialize some variables */ - ad_unmute(devc); /* Leave it unmuted now */ - - if (devc->model > MD_1848) - { - if (devc->model == MD_1845_SSCAPE) - ad_write(devc, 12, ad_read(devc, 12) | 0x50); - else - ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */ - - if (devc->model == MD_IWAVE) - ad_write(devc, 12, 0x6c); /* Select codec mode 3 */ - - if (devc->model != MD_1845_SSCAPE) - for (i = 16; i < 32; i++) - ad_write(devc, i, init_values[i]); - - if (devc->model == MD_IWAVE) - ad_write(devc, 16, 0x30); /* Playback and capture counters enabled */ - } - if (devc->model > MD_1848) - { - if (devc->audio_flags & DMA_DUPLEX) - ad_write(devc, 9, ad_read(devc, 9) & ~0x04); /* Dual DMA mode */ - else - ad_write(devc, 9, ad_read(devc, 9) | 0x04); /* Single DMA mode */ - - if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) - ad_write(devc, 27, ad_read(devc, 27) | 0x08); /* Alternate freq select enabled */ - - if (devc->model == MD_IWAVE) - { /* Some magic Interwave specific initialization */ - ad_write(devc, 12, 0x6c); /* Select codec mode 3 */ - ad_write(devc, 16, 0x30); /* Playback and capture counters enabled */ - ad_write(devc, 17, 0xc2); /* Alternate feature enable */ - } - } - else - { - devc->audio_flags &= ~DMA_DUPLEX; - ad_write(devc, 9, ad_read(devc, 9) | 0x04); /* Single DMA mode */ - if (soundpro) - ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */ - } - - outb((0), io_Status(devc)); /* Clear pending interrupts */ - - /* - * Toggle the MCE bit. It completes the initialization phase. - */ - - ad_enter_MCE(devc); /* In case the bit was off */ - ad_leave_MCE(devc); - - ad1848_mixer_reset(devc); -} - -int ad1848_detect(struct resource *ports, int *ad_flags, int *osp) -{ - unsigned char tmp; - ad1848_info *devc = &adev_info[nr_ad1848_devs]; - unsigned char tmp1 = 0xff, tmp2 = 0xff; - int optiC930 = 0; /* OPTi 82C930 flag */ - int interwave = 0; - int ad1847_flag = 0; - int cs4248_flag = 0; - int sscape_flag = 0; - int io_base = ports->start; - - int i; - - DDB(printk("ad1848_detect(%x)\n", io_base)); - - if (ad_flags) - { - if (*ad_flags == 0x12345678) - { - interwave = 1; - *ad_flags = 0; - } - - if (*ad_flags == 0x87654321) - { - sscape_flag = 1; - *ad_flags = 0; - } - - if (*ad_flags == 0x12345677) - { - cs4248_flag = 1; - *ad_flags = 0; - } - } - if (nr_ad1848_devs >= MAX_AUDIO_DEV) - { - printk(KERN_ERR "ad1848 - Too many audio devices\n"); - return 0; - } - spin_lock_init(&devc->lock); - devc->base = io_base; - devc->irq_ok = 0; - devc->timer_running = 0; - devc->MCE_bit = 0x40; - devc->irq = 0; - devc->open_mode = 0; - devc->chip_name = devc->name = "AD1848"; - devc->model = MD_1848; /* AD1848 or CS4248 */ - devc->levels = NULL; - devc->debug_flag = 0; - - /* - * Check that the I/O address is in use. - * - * The bit 0x80 of the base I/O port is known to be 0 after the - * chip has performed its power on initialization. Just assume - * this has happened before the OS is starting. - * - * If the I/O address is unused, it typically returns 0xff. - */ - - if (inb(devc->base) == 0xff) - { - DDB(printk("ad1848_detect: The base I/O address appears to be dead\n")); - } - - /* - * Wait for the device to stop initialization - */ - - DDB(printk("ad1848_detect() - step 0\n")); - - for (i = 0; i < 10000000; i++) - { - unsigned char x = inb(devc->base); - - if (x == 0xff || !(x & 0x80)) - break; - } - - DDB(printk("ad1848_detect() - step A\n")); - - if (inb(devc->base) == 0x80) /* Not ready. Let's wait */ - ad_leave_MCE(devc); - - if ((inb(devc->base) & 0x80) != 0x00) /* Not a AD1848 */ - { - DDB(printk("ad1848 detect error - step A (%02x)\n", (int) inb(devc->base))); - return 0; - } - - /* - * Test if it's possible to change contents of the indirect registers. - * Registers 0 and 1 are ADC volume registers. The bit 0x10 is read only - * so try to avoid using it. - */ - - DDB(printk("ad1848_detect() - step B\n")); - ad_write(devc, 0, 0xaa); - ad_write(devc, 1, 0x45); /* 0x55 with bit 0x10 clear */ - - if ((tmp1 = ad_read(devc, 0)) != 0xaa || (tmp2 = ad_read(devc, 1)) != 0x45) - { - if (tmp2 == 0x65) /* AD1847 has couple of bits hardcoded to 1 */ - ad1847_flag = 1; - else - { - DDB(printk("ad1848 detect error - step B (%x/%x)\n", tmp1, tmp2)); - return 0; - } - } - DDB(printk("ad1848_detect() - step C\n")); - ad_write(devc, 0, 0x45); - ad_write(devc, 1, 0xaa); - - if ((tmp1 = ad_read(devc, 0)) != 0x45 || (tmp2 = ad_read(devc, 1)) != 0xaa) - { - if (tmp2 == 0x8a) /* AD1847 has few bits hardcoded to 1 */ - ad1847_flag = 1; - else - { - DDB(printk("ad1848 detect error - step C (%x/%x)\n", tmp1, tmp2)); - return 0; - } - } - - /* - * The indirect register I12 has some read only bits. Let's - * try to change them. - */ - - DDB(printk("ad1848_detect() - step D\n")); - tmp = ad_read(devc, 12); - ad_write(devc, 12, (~tmp) & 0x0f); - - if ((tmp & 0x0f) != ((tmp1 = ad_read(devc, 12)) & 0x0f)) - { - DDB(printk("ad1848 detect error - step D (%x)\n", tmp1)); - return 0; - } - - /* - * NOTE! Last 4 bits of the reg I12 tell the chip revision. - * 0x01=RevB and 0x0A=RevC. - */ - - /* - * The original AD1848/CS4248 has just 15 indirect registers. This means - * that I0 and I16 should return the same value (etc.). - * However this doesn't work with CS4248. Actually it seems to be impossible - * to detect if the chip is a CS4231 or CS4248. - * Ensure that the Mode2 enable bit of I12 is 0. Otherwise this test fails - * with CS4231. - */ - - /* - * OPTi 82C930 has mode2 control bit in another place. This test will fail - * with it. Accept this situation as a possible indication of this chip. - */ - - DDB(printk("ad1848_detect() - step F\n")); - ad_write(devc, 12, 0); /* Mode2=disabled */ - - for (i = 0; i < 16; i++) - { - if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) - { - DDB(printk("ad1848 detect step F(%d/%x/%x) - OPTi chip???\n", i, tmp1, tmp2)); - if (!ad1847_flag) - optiC930 = 1; - break; - } - } - - /* - * Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit (0x40). - * The bit 0x80 is always 1 in CS4248 and CS4231. - */ - - DDB(printk("ad1848_detect() - step G\n")); - - if (ad_flags && *ad_flags == 400) - *ad_flags = 0; - else - ad_write(devc, 12, 0x40); /* Set mode2, clear 0x80 */ - - - if (ad_flags) - *ad_flags = 0; - - tmp1 = ad_read(devc, 12); - if (tmp1 & 0x80) - { - if (ad_flags) - *ad_flags |= AD_F_CS4248; - - devc->chip_name = "CS4248"; /* Our best knowledge just now */ - } - if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40)) - { - /* - * CS4231 detected - is it? - * - * Verify that setting I0 doesn't change I16. - */ - - DDB(printk("ad1848_detect() - step H\n")); - ad_write(devc, 16, 0); /* Set I16 to known value */ - - ad_write(devc, 0, 0x45); - if ((tmp1 = ad_read(devc, 16)) != 0x45) /* No change -> CS4231? */ - { - ad_write(devc, 0, 0xaa); - if ((tmp1 = ad_read(devc, 16)) == 0xaa) /* Rotten bits? */ - { - DDB(printk("ad1848 detect error - step H(%x)\n", tmp1)); - return 0; - } - - /* - * Verify that some bits of I25 are read only. - */ - - DDB(printk("ad1848_detect() - step I\n")); - tmp1 = ad_read(devc, 25); /* Original bits */ - ad_write(devc, 25, ~tmp1); /* Invert all bits */ - if ((ad_read(devc, 25) & 0xe7) == (tmp1 & 0xe7)) - { - int id; - - /* - * It's at least CS4231 - */ - - devc->chip_name = "CS4231"; - devc->model = MD_4231; - - /* - * It could be an AD1845 or CS4231A as well. - * CS4231 and AD1845 report the same revision info in I25 - * while the CS4231A reports different. - */ - - id = ad_read(devc, 25); - if ((id & 0xe7) == 0x80) /* Device busy??? */ - id = ad_read(devc, 25); - if ((id & 0xe7) == 0x80) /* Device still busy??? */ - id = ad_read(devc, 25); - DDB(printk("ad1848_detect() - step J (%02x/%02x)\n", id, ad_read(devc, 25))); - - if ((id & 0xe7) == 0x80) { - /* - * It must be a CS4231 or AD1845. The register I23 of - * CS4231 is undefined and it appears to be read only. - * AD1845 uses I23 for setting sample rate. Assume - * the chip is AD1845 if I23 is changeable. - */ - - unsigned char tmp = ad_read(devc, 23); - ad_write(devc, 23, ~tmp); - - if (interwave) - { - devc->model = MD_IWAVE; - devc->chip_name = "IWave"; - } - else if (ad_read(devc, 23) != tmp) /* AD1845 ? */ - { - devc->chip_name = "AD1845"; - devc->model = MD_1845; - } - else if (cs4248_flag) - { - if (ad_flags) - *ad_flags |= AD_F_CS4248; - devc->chip_name = "CS4248"; - devc->model = MD_1848; - ad_write(devc, 12, ad_read(devc, 12) & ~0x40); /* Mode2 off */ - } - ad_write(devc, 23, tmp); /* Restore */ - } - else - { - switch (id & 0x1f) { - case 3: /* CS4236/CS4235/CS42xB/CS4239 */ - { - int xid; - ad_write(devc, 12, ad_read(devc, 12) | 0x60); /* switch to mode 3 */ - ad_write(devc, 23, 0x9c); /* select extended register 25 */ - xid = inb(io_Indexed_Data(devc)); - ad_write(devc, 12, ad_read(devc, 12) & ~0x60); /* back to mode 0 */ - switch (xid & 0x1f) - { - case 0x00: - devc->chip_name = "CS4237B(B)"; - devc->model = MD_42xB; - break; - case 0x08: - /* Seems to be a 4238 ?? */ - devc->chip_name = "CS4238"; - devc->model = MD_42xB; - break; - case 0x09: - devc->chip_name = "CS4238B"; - devc->model = MD_42xB; - break; - case 0x0b: - devc->chip_name = "CS4236B"; - devc->model = MD_4236; - break; - case 0x10: - devc->chip_name = "CS4237B"; - devc->model = MD_42xB; - break; - case 0x1d: - devc->chip_name = "CS4235"; - devc->model = MD_4235; - break; - case 0x1e: - devc->chip_name = "CS4239"; - devc->model = MD_4239; - break; - default: - printk("Chip ident is %X.\n", xid&0x1F); - devc->chip_name = "CS42xx"; - devc->model = MD_4232; - break; - } - } - break; - - case 2: /* CS4232/CS4232A */ - devc->chip_name = "CS4232"; - devc->model = MD_4232; - break; - - case 0: - if ((id & 0xe0) == 0xa0) - { - devc->chip_name = "CS4231A"; - devc->model = MD_4231A; - } - else - { - devc->chip_name = "CS4321"; - devc->model = MD_4231; - } - break; - - default: /* maybe */ - DDB(printk("ad1848: I25 = %02x/%02x\n", ad_read(devc, 25), ad_read(devc, 25) & 0xe7)); - if (optiC930) - { - devc->chip_name = "82C930"; - devc->model = MD_C930; - } - else - { - devc->chip_name = "CS4231"; - devc->model = MD_4231; - } - } - } - } - ad_write(devc, 25, tmp1); /* Restore bits */ - - DDB(printk("ad1848_detect() - step K\n")); - } - } else if (tmp1 == 0x0a) { - /* - * Is it perhaps a SoundPro CMI8330? - * If so, then we should be able to change indirect registers - * greater than I15 after activating MODE2, even though reading - * back I12 does not show it. - */ - - /* - * Let's try comparing register values - */ - for (i = 0; i < 16; i++) { - if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) { - DDB(printk("ad1848 detect step H(%d/%x/%x) - SoundPro chip?\n", i, tmp1, tmp2)); - soundpro = 1; - devc->chip_name = "SoundPro CMI 8330"; - break; - } - } - } - - DDB(printk("ad1848_detect() - step L\n")); - if (ad_flags) - { - if (devc->model != MD_1848) - *ad_flags |= AD_F_CS4231; - } - DDB(printk("ad1848_detect() - Detected OK\n")); - - if (devc->model == MD_1848 && ad1847_flag) - devc->chip_name = "AD1847"; - - - if (sscape_flag == 1) - devc->model = MD_1845_SSCAPE; - - return 1; -} - -int ad1848_init (char *name, struct resource *ports, int irq, int dma_playback, - int dma_capture, int share_dma, int *osp, struct module *owner) -{ - /* - * NOTE! If irq < 0, there is another driver which has allocated the IRQ - * so that this driver doesn't need to allocate/deallocate it. - * The actually used IRQ is ABS(irq). - */ - - int my_dev; - char dev_name[100]; - int e; - - ad1848_info *devc = &adev_info[nr_ad1848_devs]; - - ad1848_port_info *portc = NULL; - - devc->irq = (irq > 0) ? irq : 0; - devc->open_mode = 0; - devc->timer_ticks = 0; - devc->dma1 = dma_playback; - devc->dma2 = dma_capture; - devc->subtype = cfg.card_subtype; - devc->audio_flags = DMA_AUTOMODE; - devc->playback_dev = devc->record_dev = 0; - if (name != NULL) - devc->name = name; - - if (name != NULL && name[0] != 0) - sprintf(dev_name, - "%s (%s)", name, devc->chip_name); - else - sprintf(dev_name, - "Generic audio codec (%s)", devc->chip_name); - - rename_region(ports, devc->name); - - conf_printf2(dev_name, devc->base, devc->irq, dma_playback, dma_capture); - - if (devc->model == MD_1848 || devc->model == MD_C930) - devc->audio_flags |= DMA_HARDSTOP; - - if (devc->model > MD_1848) - { - if (devc->dma1 == devc->dma2 || devc->dma2 == -1 || devc->dma1 == -1) - devc->audio_flags &= ~DMA_DUPLEX; - else - devc->audio_flags |= DMA_DUPLEX; - } - - portc = kmalloc(sizeof(ad1848_port_info), GFP_KERNEL); - if(portc==NULL) { - release_region(devc->base, 4); - return -1; - } - - if ((my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, - dev_name, - &ad1848_audio_driver, - sizeof(struct audio_driver), - devc->audio_flags, - ad_format_mask[devc->model], - devc, - dma_playback, - dma_capture)) < 0) - { - release_region(devc->base, 4); - kfree(portc); - return -1; - } - - audio_devs[my_dev]->portc = portc; - audio_devs[my_dev]->mixer_dev = -1; - if (owner) - audio_devs[my_dev]->d->owner = owner; - memset((char *) portc, 0, sizeof(*portc)); - - nr_ad1848_devs++; - - ad1848_init_hw(devc); - - if (irq > 0) - { - devc->dev_no = my_dev; - if (request_irq(devc->irq, adintr, 0, devc->name, - (void *)(long)my_dev) < 0) - { - printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n"); - /* Don't free it either then.. */ - devc->irq = 0; - } - if (capabilities[devc->model].flags & CAP_F_TIMER) - { -#ifndef CONFIG_SMP - int x; - unsigned char tmp = ad_read(devc, 16); -#endif - - devc->timer_ticks = 0; - - ad_write(devc, 21, 0x00); /* Timer MSB */ - ad_write(devc, 20, 0x10); /* Timer LSB */ -#ifndef CONFIG_SMP - ad_write(devc, 16, tmp | 0x40); /* Enable timer */ - for (x = 0; x < 100000 && devc->timer_ticks == 0; x++); - ad_write(devc, 16, tmp & ~0x40); /* Disable timer */ - - if (devc->timer_ticks == 0) - printk(KERN_WARNING "ad1848: Interrupt test failed (IRQ%d)\n", irq); - else - { - DDB(printk("Interrupt test OK\n")); - devc->irq_ok = 1; - } -#else - devc->irq_ok = 1; -#endif - } - else - devc->irq_ok = 1; /* Couldn't test. assume it's OK */ - } else if (irq < 0) - devc->dev_no = my_dev; - -#ifndef EXCLUDE_TIMERS - if ((capabilities[devc->model].flags & CAP_F_TIMER) && - devc->irq_ok) - ad1848_tmr_install(my_dev); -#endif - - if (!share_dma) - { - if (sound_alloc_dma(dma_playback, devc->name)) - printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_playback); - - if (dma_capture != dma_playback) - if (sound_alloc_dma(dma_capture, devc->name)) - printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_capture); - } - - if ((e = sound_install_mixer(MIXER_DRIVER_VERSION, - dev_name, - &ad1848_mixer_operations, - sizeof(struct mixer_operations), - devc)) >= 0) - { - audio_devs[my_dev]->mixer_dev = e; - if (owner) - mixer_devs[e]->owner = owner; - } - return my_dev; -} - -int ad1848_control(int cmd, int arg) -{ - ad1848_info *devc; - unsigned long flags; - - if (nr_ad1848_devs < 1) - return -ENODEV; - - devc = &adev_info[nr_ad1848_devs - 1]; - - switch (cmd) - { - case AD1848_SET_XTAL: /* Change clock frequency of AD1845 (only ) */ - if (devc->model != MD_1845 && devc->model != MD_1845_SSCAPE) - return -EINVAL; - spin_lock_irqsave(&devc->lock,flags); - ad_enter_MCE(devc); - ad_write(devc, 29, (ad_read(devc, 29) & 0x1f) | (arg << 5)); - ad_leave_MCE(devc); - spin_unlock_irqrestore(&devc->lock,flags); - break; - - case AD1848_MIXER_REROUTE: - { - int o = (arg >> 8) & 0xff; - int n = arg & 0xff; - - if (o < 0 || o >= SOUND_MIXER_NRDEVICES) - return -EINVAL; - - if (!(devc->supported_devices & (1 << o)) && - !(devc->supported_rec_devices & (1 << o))) - return -EINVAL; - - if (n == SOUND_MIXER_NONE) - { /* Just hide this control */ - ad1848_mixer_set(devc, o, 0); /* Shut up it */ - devc->supported_devices &= ~(1 << o); - devc->supported_rec_devices &= ~(1 << o); - break; - } - - /* Make the mixer control identified by o to appear as n */ - if (n < 0 || n >= SOUND_MIXER_NRDEVICES) - return -EINVAL; - - devc->mixer_reroute[n] = o; /* Rename the control */ - if (devc->supported_devices & (1 << o)) - devc->supported_devices |= (1 << n); - if (devc->supported_rec_devices & (1 << o)) - devc->supported_rec_devices |= (1 << n); - - devc->supported_devices &= ~(1 << o); - devc->supported_rec_devices &= ~(1 << o); - } - break; - } - return 0; -} - -void ad1848_unload(int io_base, int irq, int dma_playback, int dma_capture, int share_dma) -{ - int i, mixer, dev = 0; - ad1848_info *devc = NULL; - - for (i = 0; devc == NULL && i < nr_ad1848_devs; i++) - { - if (adev_info[i].base == io_base) - { - devc = &adev_info[i]; - dev = devc->dev_no; - } - } - - if (devc != NULL) - { - kfree(audio_devs[dev]->portc); - release_region(devc->base, 4); - - if (!share_dma) - { - if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */ - free_irq(devc->irq, (void *)(long)devc->dev_no); - - sound_free_dma(dma_playback); - - if (dma_playback != dma_capture) - sound_free_dma(dma_capture); - - } - mixer = audio_devs[devc->dev_no]->mixer_dev; - if(mixer>=0) - sound_unload_mixerdev(mixer); - - nr_ad1848_devs--; - for ( ; i < nr_ad1848_devs ; i++) - adev_info[i] = adev_info[i+1]; - } - else - printk(KERN_ERR "ad1848: Can't find device to be unloaded. Base=%x\n", io_base); -} - -static irqreturn_t adintr(int irq, void *dev_id) -{ - unsigned char status; - ad1848_info *devc; - int dev; - int alt_stat = 0xff; - unsigned char c930_stat = 0; - int cnt = 0; - - dev = (long)dev_id; - devc = (ad1848_info *) audio_devs[dev]->devc; - -interrupt_again: /* Jump back here if int status doesn't reset */ - - status = inb(io_Status(devc)); - - if (status == 0x80) - printk(KERN_DEBUG "adintr: Why?\n"); - if (devc->model == MD_1848) - outb((0), io_Status(devc)); /* Clear interrupt status */ - - if (status & 0x01) - { - if (devc->model == MD_C930) - { /* 82C930 has interrupt status register in MAD16 register MC11 */ - - spin_lock(&devc->lock); - - /* 0xe0e is C930 address port - * 0xe0f is C930 data port - */ - outb(11, 0xe0e); - c930_stat = inb(0xe0f); - outb((~c930_stat), 0xe0f); - - spin_unlock(&devc->lock); - - alt_stat = (c930_stat << 2) & 0x30; - } - else if (devc->model != MD_1848) - { - spin_lock(&devc->lock); - alt_stat = ad_read(devc, 24); - ad_write(devc, 24, ad_read(devc, 24) & ~alt_stat); /* Selective ack */ - spin_unlock(&devc->lock); - } - - if ((devc->open_mode & OPEN_READ) && (devc->audio_mode & PCM_ENABLE_INPUT) && (alt_stat & 0x20)) - { - DMAbuf_inputintr(devc->record_dev); - } - if ((devc->open_mode & OPEN_WRITE) && (devc->audio_mode & PCM_ENABLE_OUTPUT) && - (alt_stat & 0x10)) - { - DMAbuf_outputintr(devc->playback_dev, 1); - } - if (devc->model != MD_1848 && (alt_stat & 0x40)) /* Timer interrupt */ - { - devc->timer_ticks++; -#ifndef EXCLUDE_TIMERS - if (timer_installed == dev && devc->timer_running) - sound_timer_interrupt(); -#endif - } - } -/* - * Sometimes playback or capture interrupts occur while a timer interrupt - * is being handled. The interrupt will not be retriggered if we don't - * handle it now. Check if an interrupt is still pending and restart - * the handler in this case. - */ - if (inb(io_Status(devc)) & 0x01 && cnt++ < 4) - { - goto interrupt_again; - } - return IRQ_HANDLED; -} - -/* - * Experimental initialization sequence for the integrated sound system - * of the Compaq Deskpro M. - */ - -static int init_deskpro_m(struct address_info *hw_config) -{ - unsigned char tmp; - - if ((tmp = inb(0xc44)) == 0xff) - { - DDB(printk("init_deskpro_m: Dead port 0xc44\n")); - return 0; - } - - outb(0x10, 0xc44); - outb(0x40, 0xc45); - outb(0x00, 0xc46); - outb(0xe8, 0xc47); - outb(0x14, 0xc44); - outb(0x40, 0xc45); - outb(0x00, 0xc46); - outb(0xe8, 0xc47); - outb(0x10, 0xc44); - - return 1; -} - -/* - * Experimental initialization sequence for the integrated sound system - * of Compaq Deskpro XL. - */ - -static int init_deskpro(struct address_info *hw_config) -{ - unsigned char tmp; - - if ((tmp = inb(0xc44)) == 0xff) - { - DDB(printk("init_deskpro: Dead port 0xc44\n")); - return 0; - } - outb((tmp | 0x04), 0xc44); /* Select bank 1 */ - if (inb(0xc44) != 0x04) - { - DDB(printk("init_deskpro: Invalid bank1 signature in port 0xc44\n")); - return 0; - } - /* - * OK. It looks like a Deskpro so let's proceed. - */ - - /* - * I/O port 0xc44 Audio configuration register. - * - * bits 0xc0: Audio revision bits - * 0x00 = Compaq Business Audio - * 0x40 = MS Sound System Compatible (reset default) - * 0x80 = Reserved - * 0xc0 = Reserved - * bit 0x20: No Wait State Enable - * 0x00 = Disabled (reset default, DMA mode) - * 0x20 = Enabled (programmed I/O mode) - * bit 0x10: MS Sound System Decode Enable - * 0x00 = Decoding disabled (reset default) - * 0x10 = Decoding enabled - * bit 0x08: FM Synthesis Decode Enable - * 0x00 = Decoding Disabled (reset default) - * 0x08 = Decoding enabled - * bit 0x04 Bank select - * 0x00 = Bank 0 - * 0x04 = Bank 1 - * bits 0x03 MSS Base address - * 0x00 = 0x530 (reset default) - * 0x01 = 0x604 - * 0x02 = 0xf40 - * 0x03 = 0xe80 - */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc44 (before): "); - outb((tmp & ~0x04), 0xc44); - printk("%02x ", inb(0xc44)); - outb((tmp | 0x04), 0xc44); - printk("%02x\n", inb(0xc44)); -#endif - - /* Set bank 1 of the register */ - tmp = 0x58; /* MSS Mode, MSS&FM decode enabled */ - - switch (hw_config->io_base) - { - case 0x530: - tmp |= 0x00; - break; - case 0x604: - tmp |= 0x01; - break; - case 0xf40: - tmp |= 0x02; - break; - case 0xe80: - tmp |= 0x03; - break; - default: - DDB(printk("init_deskpro: Invalid MSS port %x\n", hw_config->io_base)); - return 0; - } - outb((tmp & ~0x04), 0xc44); /* Write to bank=0 */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc44 (after): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc44)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc44)); -#endif - - /* - * I/O port 0xc45 FM Address Decode/MSS ID Register. - * - * bank=0, bits 0xfe: FM synthesis Decode Compare bits 7:1 (default=0x88) - * bank=0, bit 0x01: SBIC Power Control Bit - * 0x00 = Powered up - * 0x01 = Powered down - * bank=1, bits 0xfc: MSS ID (default=0x40) - */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc45 (before): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc45)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc45)); -#endif - - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - outb((0x88), 0xc45); /* FM base 7:0 = 0x88 */ - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - outb((0x10), 0xc45); /* MSS ID = 0x10 (MSS port returns 0x04) */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc45 (after): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc45)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc45)); -#endif - - - /* - * I/O port 0xc46 FM Address Decode/Address ASIC Revision Register. - * - * bank=0, bits 0xff: FM synthesis Decode Compare bits 15:8 (default=0x03) - * bank=1, bits 0xff: Audio addressing ASIC id - */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc46 (before): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc46)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc46)); -#endif - - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - outb((0x03), 0xc46); /* FM base 15:8 = 0x03 */ - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - outb((0x11), 0xc46); /* ASIC ID = 0x11 */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc46 (after): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc46)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc46)); -#endif - - /* - * I/O port 0xc47 FM Address Decode Register. - * - * bank=0, bits 0xff: Decode enable selection for various FM address bits - * bank=1, bits 0xff: Reserved - */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc47 (before): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc47)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc47)); -#endif - - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - outb((0x7c), 0xc47); /* FM decode enable bits = 0x7c */ - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - outb((0x00), 0xc47); /* Reserved bank1 = 0x00 */ - -#ifdef DEBUGXL - /* Debug printing */ - printk("Port 0xc47 (after): "); - outb((tmp & ~0x04), 0xc44); /* Select bank=0 */ - printk("%02x ", inb(0xc47)); - outb((tmp | 0x04), 0xc44); /* Select bank=1 */ - printk("%02x\n", inb(0xc47)); -#endif - - /* - * I/O port 0xc6f = Audio Disable Function Register - */ - -#ifdef DEBUGXL - printk("Port 0xc6f (before) = %02x\n", inb(0xc6f)); -#endif - - outb((0x80), 0xc6f); - -#ifdef DEBUGXL - printk("Port 0xc6f (after) = %02x\n", inb(0xc6f)); -#endif - - return 1; -} - -int probe_ms_sound(struct address_info *hw_config, struct resource *ports) -{ - unsigned char tmp; - - DDB(printk("Entered probe_ms_sound(%x, %d)\n", hw_config->io_base, hw_config->card_subtype)); - - if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */ - { - /* check_opl3(0x388, hw_config); */ - return ad1848_detect(ports, NULL, hw_config->osp); - } - - if (deskpro_xl && hw_config->card_subtype == 2) /* Compaq Deskpro XL */ - { - if (!init_deskpro(hw_config)) - return 0; - } - - if (deskpro_m) /* Compaq Deskpro M */ - { - if (!init_deskpro_m(hw_config)) - return 0; - } - - /* - * Check if the IO port returns valid signature. The original MS Sound - * system returns 0x04 while some cards (AudioTrix Pro for example) - * return 0x00 or 0x0f. - */ - - if ((tmp = inb(hw_config->io_base + 3)) == 0xff) /* Bus float */ - { - int ret; - - DDB(printk("I/O address is inactive (%x)\n", tmp)); - if (!(ret = ad1848_detect(ports, NULL, hw_config->osp))) - return 0; - return 1; - } - DDB(printk("MSS signature = %x\n", tmp & 0x3f)); - if ((tmp & 0x3f) != 0x04 && - (tmp & 0x3f) != 0x0f && - (tmp & 0x3f) != 0x00) - { - int ret; - - MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x (0x%x)\n", hw_config->io_base, (int) inb(hw_config->io_base + 3))); - DDB(printk("Trying to detect codec anyway but IRQ/DMA may not work\n")); - if (!(ret = ad1848_detect(ports, NULL, hw_config->osp))) - return 0; - - hw_config->card_subtype = 1; - return 1; - } - if ((hw_config->irq != 5) && - (hw_config->irq != 7) && - (hw_config->irq != 9) && - (hw_config->irq != 10) && - (hw_config->irq != 11) && - (hw_config->irq != 12)) - { - printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq); - return 0; - } - if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3) - { - printk(KERN_ERR "MSS: Bad DMA %d\n", hw_config->dma); - return 0; - } - /* - * Check that DMA0 is not in use with a 8 bit board. - */ - - if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80) - { - printk(KERN_ERR "MSS: Can't use DMA0 with a 8 bit card/slot\n"); - return 0; - } - if (hw_config->irq > 7 && hw_config->irq != 9 && inb(hw_config->io_base + 3) & 0x80) - { - printk(KERN_ERR "MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq); - return 0; - } - return ad1848_detect(ports, NULL, hw_config->osp); -} - -void attach_ms_sound(struct address_info *hw_config, struct resource *ports, struct module *owner) -{ - static signed char interrupt_bits[12] = - { - -1, -1, -1, -1, -1, 0x00, -1, 0x08, -1, 0x10, 0x18, 0x20 - }; - signed char bits; - char dma2_bit = 0; - - static char dma_bits[4] = - { - 1, 2, 0, 3 - }; - - int config_port = hw_config->io_base + 0; - int version_port = hw_config->io_base + 3; - int dma = hw_config->dma; - int dma2 = hw_config->dma2; - - if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */ - { - hw_config->slots[0] = ad1848_init("MS Sound System", ports, - hw_config->irq, - hw_config->dma, - hw_config->dma2, 0, - hw_config->osp, - owner); - return; - } - /* - * Set the IRQ and DMA addresses. - */ - - bits = interrupt_bits[hw_config->irq]; - if (bits == -1) - { - printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq); - release_region(ports->start, 4); - release_region(ports->start - 4, 4); - return; - } - outb((bits | 0x40), config_port); - if ((inb(version_port) & 0x40) == 0) - printk(KERN_ERR "[MSS: IRQ Conflict?]\n"); - -/* - * Handle the capture DMA channel - */ - - if (dma2 != -1 && dma2 != dma) - { - if (!((dma == 0 && dma2 == 1) || - (dma == 1 && dma2 == 0) || - (dma == 3 && dma2 == 0))) - { /* Unsupported combination. Try to swap channels */ - int tmp = dma; - - dma = dma2; - dma2 = tmp; - } - if ((dma == 0 && dma2 == 1) || - (dma == 1 && dma2 == 0) || - (dma == 3 && dma2 == 0)) - { - dma2_bit = 0x04; /* Enable capture DMA */ - } - else - { - printk(KERN_WARNING "MSS: Invalid capture DMA\n"); - dma2 = dma; - } - } - else - { - dma2 = dma; - } - - hw_config->dma = dma; - hw_config->dma2 = dma2; - - outb((bits | dma_bits[dma] | dma2_bit), config_port); /* Write IRQ+DMA setup */ - - hw_config->slots[0] = ad1848_init("MS Sound System", ports, - hw_config->irq, - dma, dma2, 0, - hw_config->osp, - THIS_MODULE); -} - -void unload_ms_sound(struct address_info *hw_config) -{ - ad1848_unload(hw_config->io_base + 4, - hw_config->irq, - hw_config->dma, - hw_config->dma2, 0); - sound_unload_audiodev(hw_config->slots[0]); - release_region(hw_config->io_base, 4); -} - -#ifndef EXCLUDE_TIMERS - -/* - * Timer stuff (for /dev/music). - */ - -static unsigned int current_interval; - -static unsigned int ad1848_tmr_start(int dev, unsigned int usecs) -{ - unsigned long flags; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - unsigned long xtal_nsecs; /* nanoseconds per xtal oscillator tick */ - unsigned long divider; - - spin_lock_irqsave(&devc->lock,flags); - - /* - * Length of the timer interval (in nanoseconds) depends on the - * selected crystal oscillator. Check this from bit 0x01 of I8. - * - * AD1845 has just one oscillator which has cycle time of 10.050 us - * (when a 24.576 MHz xtal oscillator is used). - * - * Convert requested interval to nanoseconds before computing - * the timer divider. - */ - - if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) - xtal_nsecs = 10050; - else if (ad_read(devc, 8) & 0x01) - xtal_nsecs = 9920; - else - xtal_nsecs = 9969; - - divider = (usecs * 1000 + xtal_nsecs / 2) / xtal_nsecs; - - if (divider < 100) /* Don't allow shorter intervals than about 1ms */ - divider = 100; - - if (divider > 65535) /* Overflow check */ - divider = 65535; - - ad_write(devc, 21, (divider >> 8) & 0xff); /* Set upper bits */ - ad_write(devc, 20, divider & 0xff); /* Set lower bits */ - ad_write(devc, 16, ad_read(devc, 16) | 0x40); /* Start the timer */ - devc->timer_running = 1; - spin_unlock_irqrestore(&devc->lock,flags); - - return current_interval = (divider * xtal_nsecs + 500) / 1000; -} - -static void ad1848_tmr_reprogram(int dev) -{ - /* - * Audio driver has changed sampling rate so that a different xtal - * oscillator was selected. We have to reprogram the timer rate. - */ - - ad1848_tmr_start(dev, current_interval); - sound_timer_syncinterval(current_interval); -} - -static void ad1848_tmr_disable(int dev) -{ - unsigned long flags; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - - spin_lock_irqsave(&devc->lock,flags); - ad_write(devc, 16, ad_read(devc, 16) & ~0x40); - devc->timer_running = 0; - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void ad1848_tmr_restart(int dev) -{ - unsigned long flags; - ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc; - - if (current_interval == 0) - return; - - spin_lock_irqsave(&devc->lock,flags); - ad_write(devc, 16, ad_read(devc, 16) | 0x40); - devc->timer_running = 1; - spin_unlock_irqrestore(&devc->lock,flags); -} - -static struct sound_lowlev_timer ad1848_tmr = -{ - 0, - 2, - ad1848_tmr_start, - ad1848_tmr_disable, - ad1848_tmr_restart -}; - -static int ad1848_tmr_install(int dev) -{ - if (timer_installed != -1) - return 0; /* Don't install another timer */ - - timer_installed = ad1848_tmr.dev = dev; - sound_timer_init(&ad1848_tmr, audio_devs[dev]->name); - - return 1; -} -#endif /* EXCLUDE_TIMERS */ - -EXPORT_SYMBOL(ad1848_detect); -EXPORT_SYMBOL(ad1848_init); -EXPORT_SYMBOL(ad1848_unload); -EXPORT_SYMBOL(ad1848_control); -EXPORT_SYMBOL(probe_ms_sound); -EXPORT_SYMBOL(attach_ms_sound); -EXPORT_SYMBOL(unload_ms_sound); - -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata dma2 = -1; -static int __initdata type = 0; - -module_param_hw(io, int, ioport, 0); /* I/O for a raw AD1848 card */ -module_param_hw(irq, int, irq, 0); /* IRQ to use */ -module_param_hw(dma, int, dma, 0); /* First DMA channel */ -module_param_hw(dma2, int, dma, 0); /* Second DMA channel */ -module_param(type, int, 0); /* Card type */ -module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */ -module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */ -module_param(soundpro, bool, 0); /* More special magic for SoundPro chips */ - -#ifdef CONFIG_PNP -module_param(isapnp, int, 0); -module_param(isapnpjump, int, 0); -module_param(reverse, bool, 0); -MODULE_PARM_DESC(isapnp, "When set to 0, Plug & Play support will be disabled"); -MODULE_PARM_DESC(isapnpjump, "Jumps to a specific slot in the driver's PnP table. Use the source, Luke."); -MODULE_PARM_DESC(reverse, "When set to 1, will reverse ISAPnP search order"); - -static struct pnp_dev *ad1848_dev = NULL; - -/* Please add new entries at the end of the table */ -static struct { - char *name; - unsigned short card_vendor, card_device, - vendor, function; - short mss_io, irq, dma, dma2; /* index into isapnp table */ - int type; -} ad1848_isapnp_list[] __initdata = { - {"CMI 8330 SoundPRO", - ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001), - ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), - 0, 0, 0,-1, 0}, - {"CS4232 based card", - ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), - 0, 0, 0, 1, 0}, - {"CS4232 based card", - ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), - 0, 0, 0, 1, 0}, - {"OPL3-SA2 WSS mode", - ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), - 1, 0, 0, 1, 1}, - {"Advanced Gravis InterWave Audio", - ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001), - ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), - 0, 0, 0, 1, 0}, - {NULL} -}; - -#ifdef MODULE -static struct isapnp_device_id id_table[] = { - { ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001), - ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), 0 }, - { ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), 0 }, - { ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), 0 }, - /* The main driver for this card is opl3sa2 - { ISAPNP_ANY_ID, ISAPNP_ANY_ID, - ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), 0 }, - */ - { ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001), - ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), 0 }, - {0} -}; - -MODULE_DEVICE_TABLE(isapnp, id_table); -#endif - -static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev *dev) -{ - int err; - - err = pnp_device_attach(dev); - if (err < 0) - return(NULL); - - if((err = pnp_activate_dev(dev)) < 0) { - printk(KERN_ERR "ad1848: %s %s config failed (out of resources?)[%d]\n", devname, resname, err); - - pnp_device_detach(dev); - - return(NULL); - } - audio_activated = 1; - return(dev); -} - -static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus, - struct address_info *hw_config, int slot) -{ - - /* Configure Audio device */ - if((ad1848_dev = pnp_find_dev(bus, ad1848_isapnp_list[slot].vendor, ad1848_isapnp_list[slot].function, NULL))) - { - if((ad1848_dev = activate_dev(ad1848_isapnp_list[slot].name, "ad1848", ad1848_dev))) - { - hw_config->io_base = pnp_port_start(ad1848_dev, ad1848_isapnp_list[slot].mss_io); - hw_config->irq = pnp_irq(ad1848_dev, ad1848_isapnp_list[slot].irq); - hw_config->dma = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma); - if(ad1848_isapnp_list[slot].dma2 != -1) - hw_config->dma2 = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma2); - else - hw_config->dma2 = -1; - hw_config->card_subtype = ad1848_isapnp_list[slot].type; - } else - return(NULL); - } else - return(NULL); - - return(ad1848_dev); -} - -static int __init ad1848_isapnp_init(struct address_info *hw_config, struct pnp_card *bus, int slot) -{ - char *busname = bus->name[0] ? bus->name : ad1848_isapnp_list[slot].name; - - /* Initialize this baby. */ - - if(ad1848_init_generic(bus, hw_config, slot)) { - /* We got it. */ - - printk(KERN_NOTICE "ad1848: PnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n", - busname, - hw_config->io_base, hw_config->irq, hw_config->dma, - hw_config->dma2); - return 1; - } - return 0; -} - -static int __init ad1848_isapnp_probe(struct address_info *hw_config) -{ - static int first = 1; - int i; - - /* Count entries in sb_isapnp_list */ - for (i = 0; ad1848_isapnp_list[i].card_vendor != 0; i++); - i--; - - /* Check and adjust isapnpjump */ - if( isapnpjump < 0 || isapnpjump > i) { - isapnpjump = reverse ? i : 0; - printk(KERN_ERR "ad1848: Valid range for isapnpjump is 0-%d. Adjusted to %d.\n", i, isapnpjump); - } - - if(!first || !reverse) - i = isapnpjump; - first = 0; - while(ad1848_isapnp_list[i].card_vendor != 0) { - static struct pnp_card *bus = NULL; - - while ((bus = pnp_find_card( - ad1848_isapnp_list[i].card_vendor, - ad1848_isapnp_list[i].card_device, - bus))) { - - if(ad1848_isapnp_init(hw_config, bus, i)) { - isapnpjump = i; /* start next search from here */ - return 0; - } - } - i += reverse ? -1 : 1; - } - - return -ENODEV; -} -#endif - - -static int __init init_ad1848(void) -{ - printk(KERN_INFO "ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996\n"); - -#ifdef CONFIG_PNP - if(isapnp && (ad1848_isapnp_probe(&cfg) < 0) ) { - printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n"); - isapnp = 0; - } -#endif - - if(io != -1) { - struct resource *ports; - if( isapnp == 0 ) - { - if(irq == -1 || dma == -1) { - printk(KERN_WARNING "ad1848: must give I/O , IRQ and DMA.\n"); - return -EINVAL; - } - - cfg.irq = irq; - cfg.io_base = io; - cfg.dma = dma; - cfg.dma2 = dma2; - cfg.card_subtype = type; - } - - ports = request_region(io + 4, 4, "ad1848"); - - if (!ports) - return -EBUSY; - - if (!request_region(io, 4, "WSS config")) { - release_region(io + 4, 4); - return -EBUSY; - } - - if (!probe_ms_sound(&cfg, ports)) { - release_region(io + 4, 4); - release_region(io, 4); - return -ENODEV; - } - attach_ms_sound(&cfg, ports, THIS_MODULE); - loaded = 1; - } - return 0; -} - -static void __exit cleanup_ad1848(void) -{ - if(loaded) - unload_ms_sound(&cfg); - -#ifdef CONFIG_PNP - if(ad1848_dev){ - if(audio_activated) - pnp_device_detach(ad1848_dev); - } -#endif -} - -module_init(init_ad1848); -module_exit(cleanup_ad1848); - -#ifndef MODULE -static int __init setup_ad1848(char *str) -{ - /* io, irq, dma, dma2, type */ - int ints[6]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - dma2 = ints[4]; - type = ints[5]; - - return 1; -} - -__setup("ad1848=", setup_ad1848); -#endif -MODULE_LICENSE("GPL"); diff --git a/sound/oss/ad1848.h b/sound/oss/ad1848.h deleted file mode 100644 index b95ebe28d426..000000000000 --- a/sound/oss/ad1848.h +++ /dev/null @@ -1,24 +0,0 @@ - -#include <linux/interrupt.h> - -#define AD_F_CS4231 0x0001 /* Returned if a CS4232 (or compatible) detected */ -#define AD_F_CS4248 0x0001 /* Returned if a CS4248 (or compatible) detected */ - -#define AD1848_SET_XTAL 1 -#define AD1848_MIXER_REROUTE 2 - -#define AD1848_REROUTE(oldctl, newctl) \ - ad1848_control(AD1848_MIXER_REROUTE, ((oldctl)<<8)|(newctl)) - - -int ad1848_init(char *name, struct resource *ports, int irq, int dma_playback, - int dma_capture, int share_dma, int *osp, struct module *owner); -void ad1848_unload (int io_base, int irq, int dma_playback, int dma_capture, int share_dma); - -int ad1848_detect (struct resource *ports, int *flags, int *osp); -int ad1848_control(int cmd, int arg); - -void attach_ms_sound(struct address_info * hw_config, struct resource *ports, struct module * owner); - -int probe_ms_sound(struct address_info *hw_config, struct resource *ports); -void unload_ms_sound(struct address_info *hw_info); diff --git a/sound/oss/ad1848_mixer.h b/sound/oss/ad1848_mixer.h deleted file mode 100644 index 2cf719b5fbbc..000000000000 --- a/sound/oss/ad1848_mixer.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * sound/oss/ad1848_mixer.h - * - * Definitions for the mixer of AD1848 and compatible codecs. - */ - -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - - -/* - * The AD1848 codec has generic input lines called Line, Aux1 and Aux2. - * Sound card manufacturers have connected actual inputs (CD, synth, line, - * etc) to these inputs in different order. Therefore it's difficult - * to assign mixer channels to these inputs correctly. The following - * contains two alternative mappings. The first one is for GUS MAX and - * the second is just a generic one (line1, line2 and line3). - * (Actually this is not a mapping but rather some kind of interleaving - * solution). - */ -#define MODE1_REC_DEVICES (SOUND_MASK_LINE3 | SOUND_MASK_MIC | \ - SOUND_MASK_LINE1 | SOUND_MASK_IMIX) - -#define SPRO_REC_DEVICES (SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD | SOUND_MASK_LINE1) - -#define MODE1_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_MIC | \ - SOUND_MASK_LINE2 | \ - SOUND_MASK_IGAIN | \ - SOUND_MASK_PCM | SOUND_MASK_IMIX) - -#define MODE2_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \ - SOUND_MASK_MIC | \ - SOUND_MASK_LINE3 | SOUND_MASK_SPEAKER | \ - SOUND_MASK_IGAIN | \ - SOUND_MASK_PCM | SOUND_MASK_IMIX) - -#define MODE3_MIXER_DEVICES (MODE2_MIXER_DEVICES | SOUND_MASK_VOLUME) - -/* OPTi 82C930 has no IMIX level control, but it can still be selected as an - * input - */ -#define C930_MIXER_DEVICES (SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | \ - SOUND_MASK_MIC | SOUND_MASK_VOLUME | \ - SOUND_MASK_LINE3 | \ - SOUND_MASK_IGAIN | SOUND_MASK_PCM) - -#define SPRO_MIXER_DEVICES (SOUND_MASK_VOLUME | SOUND_MASK_PCM | \ - SOUND_MASK_LINE | SOUND_MASK_SYNTH | \ - SOUND_MASK_CD | SOUND_MASK_MIC | \ - SOUND_MASK_SPEAKER | SOUND_MASK_LINE1 | \ - SOUND_MASK_OGAIN) - -struct mixer_def { - unsigned int regno:6; /* register number for volume */ - unsigned int polarity:1; /* volume polarity: 0=normal, 1=reversed */ - unsigned int bitpos:3; /* position of bits in register for volume */ - unsigned int nbits:3; /* number of bits in register for volume */ - unsigned int mutereg:6; /* register number for mute bit */ - unsigned int mutepol:1; /* mute polarity: 0=normal, 1=reversed */ - unsigned int mutepos:4; /* position of mute bit in register */ - unsigned int recreg:6; /* register number for recording bit */ - unsigned int recpol:1; /* recording polarity: 0=normal, 1=reversed */ - unsigned int recpos:4; /* position of recording bit in register */ -}; - -static char mix_cvt[101] = { - 0, 0, 3, 7,10,13,16,19,21,23,26,28,30,32,34,35,37,39,40,42, - 43,45,46,47,49,50,51,52,53,55,56,57,58,59,60,61,62,63,64,65, - 65,66,67,68,69,70,70,71,72,73,73,74,75,75,76,77,77,78,79,79, - 80,81,81,82,82,83,84,84,85,85,86,86,87,87,88,88,89,89,90,90, - 91,91,92,92,93,93,94,94,95,95,96,96,96,97,97,98,98,98,99,99, - 100 -}; - -typedef struct mixer_def mixer_ent; -typedef mixer_ent mixer_ents[2]; - -/* - * Most of the mixer entries work in backwards. Setting the polarity field - * makes them to work correctly. - * - * The channel numbering used by individual sound cards is not fixed. Some - * cards have assigned different meanings for the AUX1, AUX2 and LINE inputs. - * The current version doesn't try to compensate this. - */ - -#define MIX_ENT(name, reg_l, pola_l, pos_l, len_l, reg_r, pola_r, pos_r, len_r, mute_bit) \ - [name] = {{reg_l, pola_l, pos_l, len_l, reg_l, 0, mute_bit, 0, 0, 8}, \ - {reg_r, pola_r, pos_r, len_r, reg_r, 0, mute_bit, 0, 0, 8}} - -#define MIX_ENT2(name, reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \ - rec_reg_l, rec_pola_l, rec_pos_l, \ - reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r, \ - rec_reg_r, rec_pola_r, rec_pos_r) \ - [name] = {{reg_l, pola_l, pos_l, len_l, mute_reg_l, mute_pola_l, mute_pos_l, \ - rec_reg_l, rec_pola_l, rec_pos_l}, \ - {reg_r, pola_r, pos_r, len_r, mute_reg_r, mute_pola_r, mute_pos_r, \ - rec_reg_r, rec_pola_r, rec_pos_r}} - -static mixer_ents ad1848_mix_devices[32] = { - MIX_ENT(SOUND_MIXER_VOLUME, 27, 1, 0, 4, 29, 1, 0, 4, 8), - MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7), - MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_MIC, 0, 0, 5, 1, 1, 0, 5, 1, 8), - MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_IMIX, 13, 1, 2, 6, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8), - MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 0, 5, 19, 1, 0, 5, 7) -}; - -static mixer_ents iwave_mix_devices[32] = { - MIX_ENT(SOUND_MIXER_VOLUME, 25, 1, 0, 5, 27, 1, 0, 5, 8), - MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7), - MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_MIC, 0, 0, 5, 1, 1, 0, 5, 1, 8), - MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_IMIX, 16, 1, 0, 5, 17, 1, 0, 5, 8), - MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8), - MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 0, 5, 19, 1, 0, 5, 7) -}; - -static mixer_ents cs42xb_mix_devices[32] = { - /* Digital master volume actually has seven bits, but we only use - six to avoid the discontinuity when the analog gain kicks in. */ - MIX_ENT(SOUND_MIXER_VOLUME, 46, 1, 0, 6, 47, 1, 0, 6, 7), - MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 0, 5, 5, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 6, 7, 1, 0, 6, 7), - MIX_ENT(SOUND_MIXER_SPEAKER, 26, 1, 0, 4, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE, 18, 1, 0, 5, 19, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_MIC, 34, 1, 0, 5, 35, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_CD, 2, 1, 0, 5, 3, 1, 0, 5, 7), - /* For the IMIX entry, it was not possible to use the MIX_ENT macro - because the mute bit is in different positions for the two - channels and requires reverse polarity. */ - [SOUND_MIXER_IMIX] = {{13, 1, 2, 6, 13, 1, 0, 0, 0, 8}, - {42, 1, 0, 6, 42, 1, 7, 0, 0, 8}}, - MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8), - MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 0, 5, 3, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 0, 5, 5, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_LINE3, 38, 1, 0, 6, 39, 1, 0, 6, 7) -}; - -/* OPTi 82C930 has somewhat different port addresses. - * Note: VOLUME == SPEAKER, SYNTH == LINE2, LINE == LINE3, CD == LINE1 - * VOLUME, SYNTH, LINE, CD are not enabled above. - * MIC is level of mic monitoring direct to output. Same for CD, LINE, etc. - */ -static mixer_ents c930_mix_devices[32] = { - MIX_ENT(SOUND_MIXER_VOLUME, 22, 1, 1, 5, 23, 1, 1, 5, 7), - MIX_ENT(SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_SYNTH, 4, 1, 1, 4, 5, 1, 1, 4, 7), - MIX_ENT(SOUND_MIXER_PCM, 6, 1, 0, 5, 7, 1, 0, 5, 7), - MIX_ENT(SOUND_MIXER_SPEAKER, 22, 1, 1, 5, 23, 1, 1, 5, 7), - MIX_ENT(SOUND_MIXER_LINE, 18, 1, 1, 4, 19, 1, 1, 4, 7), - MIX_ENT(SOUND_MIXER_MIC, 20, 1, 1, 4, 21, 1, 1, 4, 7), - MIX_ENT(SOUND_MIXER_CD, 2, 1, 1, 4, 3, 1, 1, 4, 7), - MIX_ENT(SOUND_MIXER_IMIX, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_IGAIN, 0, 0, 0, 4, 1, 0, 0, 4, 8), - MIX_ENT(SOUND_MIXER_OGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT(SOUND_MIXER_LINE1, 2, 1, 1, 4, 3, 1, 1, 4, 7), - MIX_ENT(SOUND_MIXER_LINE2, 4, 1, 1, 4, 5, 1, 1, 4, 7), - MIX_ENT(SOUND_MIXER_LINE3, 18, 1, 1, 4, 19, 1, 1, 4, 7) -}; - -static mixer_ents spro_mix_devices[32] = { - MIX_ENT (SOUND_MIXER_VOLUME, 19, 0, 4, 4, 19, 0, 0, 4, 8), - MIX_ENT (SOUND_MIXER_BASS, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT (SOUND_MIXER_TREBLE, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT2(SOUND_MIXER_SYNTH, 4, 1, 1, 4, 23, 0, 3, 0, 0, 8, - 5, 1, 1, 4, 23, 0, 3, 0, 0, 8), - MIX_ENT (SOUND_MIXER_PCM, 6, 1, 1, 4, 7, 1, 1, 4, 8), - MIX_ENT (SOUND_MIXER_SPEAKER, 18, 0, 3, 2, 0, 0, 0, 0, 8), - MIX_ENT2(SOUND_MIXER_LINE, 20, 0, 4, 4, 17, 1, 4, 16, 0, 2, - 20, 0, 0, 4, 17, 1, 3, 16, 0, 1), - MIX_ENT2(SOUND_MIXER_MIC, 18, 0, 0, 3, 17, 1, 0, 16, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), - MIX_ENT2(SOUND_MIXER_CD, 21, 0, 4, 4, 17, 1, 2, 16, 0, 4, - 21, 0, 0, 4, 17, 1, 1, 16, 0, 3), - MIX_ENT (SOUND_MIXER_IMIX, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT (SOUND_MIXER_ALTPCM, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT (SOUND_MIXER_RECLEV, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT (SOUND_MIXER_IGAIN, 0, 0, 0, 0, 0, 0, 0, 0, 8), - MIX_ENT (SOUND_MIXER_OGAIN, 17, 1, 6, 1, 0, 0, 0, 0, 8), - /* This is external wavetable */ - MIX_ENT2(SOUND_MIXER_LINE1, 22, 0, 4, 4, 23, 1, 1, 23, 0, 4, - 22, 0, 0, 4, 23, 1, 0, 23, 0, 5), -}; - -static int default_mixer_levels[32] = -{ - 0x3232, /* Master Volume */ - 0x3232, /* Bass */ - 0x3232, /* Treble */ - 0x4b4b, /* FM */ - 0x3232, /* PCM */ - 0x1515, /* PC Speaker */ - 0x2020, /* Ext Line */ - 0x1010, /* Mic */ - 0x4b4b, /* CD */ - 0x0000, /* Recording monitor */ - 0x4b4b, /* Second PCM */ - 0x4b4b, /* Recording level */ - 0x4b4b, /* Input gain */ - 0x4b4b, /* Output gain */ - 0x2020, /* Line1 */ - 0x2020, /* Line2 */ - 0x1515 /* Line3 (usually line in)*/ -}; - -#define LEFT_CHN 0 -#define RIGHT_CHN 1 - -/* - * Channel enable bits for ioctl(SOUND_MIXER_PRIVATE1) - */ - -#ifndef AUDIO_SPEAKER -#define AUDIO_SPEAKER 0x01 /* Enable mono output */ -#define AUDIO_HEADPHONE 0x02 /* Sparc only */ -#define AUDIO_LINE_OUT 0x04 /* Sparc only */ -#endif diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c deleted file mode 100644 index f058ed6bdb69..000000000000 --- a/sound/oss/aedsp16.c +++ /dev/null @@ -1,1373 +0,0 @@ -/* - sound/oss/aedsp16.c - - Audio Excel DSP 16 software configuration routines - Copyright (C) 1995,1996,1997,1998 Riccardo Facchetti (fizban@tin.it) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - */ -/* - * Include the main OSS Lite header file. It include all the os, OSS Lite, etc - * headers needed by this source. - */ -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/init.h> -#include "sound_config.h" - -/* - - READ THIS - - This module started to configure the Audio Excel DSP 16 Sound Card. - Now works with the SC-6000 (old aedsp16) and new SC-6600 based cards. - - NOTE: I have NO idea about Audio Excel DSP 16 III. If someone owns this - audio card and want to see the kernel support for it, please contact me. - - Audio Excel DSP 16 is an SB pro II, Microsoft Sound System and MPU-401 - compatible card. - It is software-only configurable (no jumpers to hard-set irq/dma/mpu-irq), - so before this module, the only way to configure the DSP under linux was - boot the MS-DOS loading the sound.sys device driver (this driver soft- - configure the sound board hardware by massaging someone of its registers), - and then ctrl-alt-del to boot linux with the DSP configured by the DOS - driver. - - This module works configuring your Audio Excel DSP 16's irq, dma and - mpu-401-irq. The OSS Lite routines rely on the fact that if the - hardware is there, they can detect it. The problem with AEDSP16 is - that no hardware can be found by the probe routines if the sound card - is not configured properly. Sometimes the kernel probe routines can find - an SBPRO even when the card is not configured (this is the standard setup - of the card), but the SBPRO emulation don't work well if the card is not - properly initialized. For this reason - - aedsp16_init_board() - - routine is called before the OSS Lite probe routines try to detect the - hardware. - - NOTE (READ THE NOTE TOO, IT CONTAIN USEFUL INFORMATIONS) - - NOTE: Now it works with SC-6000 and SC-6600 based audio cards. The new cards - have no jumper switch at all. No more WSS or MPU-401 I/O port switches. They - have to be configured by software. - - NOTE: The driver is merged with the new OSS Lite sound driver. It works - as a lowlevel driver. - - The Audio Excel DSP 16 Sound Card emulates both SBPRO and MSS; - the OSS Lite sound driver can be configured for SBPRO and MSS cards - at the same time, but the aedsp16 can't be two cards!! - When we configure it, we have to choose the SBPRO or the MSS emulation - for AEDSP16. We also can install a *REAL* card of the other type (see [1]). - - NOTE: If someone can test the combination AEDSP16+MSS or AEDSP16+SBPRO - please let me know if it works. - - The MPU-401 support can be compiled in together with one of the other - two operating modes. - - NOTE: This is something like plug-and-play: we have only to plug - the AEDSP16 board in the socket, and then configure and compile - a kernel that uses the AEDSP16 software configuration capability. - No jumper setting is needed! - - For example, if you want AEDSP16 to be an SBPro, on irq 10, dma 3 - you have just to make config the OSS Lite package, configuring - the AEDSP16 sound card, then activating the SBPro emulation mode - and at last configuring IRQ and DMA. - Compile the kernel and run it. - - NOTE: This means for SC-6000 cards that you can choose irq and dma, - but not the I/O addresses. To change I/O addresses you have to set - them with jumpers. For SC-6600 cards you have no jumpers so you have - to set up your full card configuration in the make config. - - You can change the irq/dma/mirq settings WITHOUT THE NEED to open - your computer and massage the jumpers (there are no irq/dma/mirq - jumpers to be configured anyway, only I/O BASE values have to be - configured with jumpers) - - For some ununderstandable reason, the card default of irq 7, dma 1, - don't work for me. Seems to be an IRQ or DMA conflict. Under heavy - HDD work, the kernel start to erupt out a lot of messages like: - - 'Sound: DMA timed out - IRQ/DRQ config error?' - - For what I can say, I have NOT any conflict at irq 7 (under linux I'm - using the lp polling driver), and dma line 1 is unused as stated by - /proc/dma. I can suppose this is a bug of AEDSP16. I know my hardware so - I'm pretty sure I have not any conflict, but may be I'm wrong. Who knows! - Anyway a setting of irq 10, dma 3 works really fine. - - NOTE: if someone can use AEDSP16 with irq 7, dma 1, please let me know - the emulation mode, all the installed hardware and the hardware - configuration (irq and dma settings of all the hardware). - - This init module should work with SBPRO+MSS, when one of the two is - the AEDSP16 emulation and the other the real card. (see [1]) - For example: - - AEDSP16 (0x220) in SBPRO emu (0x220) + real MSS + other - AEDSP16 (0x220) in MSS emu + real SBPRO (0x240) + other - - MPU401 should work. (see [2]) - - [1] - --- - Date: Mon, 29 Jul 1997 08:35:40 +0100 - From: Mr S J Greenaway <sjg95@unixfe.rl.ac.uk> - - [...] - Just to let you know got my Audio Excel (emulating a MSS) working - with my original SB16, thanks for the driver! - [...] - --- - - [2] Not tested by me for lack of hardware. - - TODO, WISHES AND TECH - - - About I/O ports allocation - - - Request the 2x0h region (port base) in any case if we are using this card. - - NOTE: the "aedsp16 (base)" string with which we are requesting the aedsp16 - port base region (see code) does not mean necessarily that we are emulating - sbpro. Even if this region is the sbpro I/O ports region, we use this - region to access the control registers of the card, and if emulating - sbpro, I/O sbpro registers too. If we are emulating MSS, the sbpro - registers are not used, in no way, to emulate an sbpro: they are - used only for configuration purposes. - - Started Fri Mar 17 16:13:18 MET 1995 - - v0.1 (ALPHA, was a user-level program called AudioExcelDSP16.c) - - Initial code. - v0.2 (ALPHA) - - Cleanups. - - Integrated with Linux voxware v 2.90-2 kernel sound driver. - - SoundBlaster Pro mode configuration. - - Microsoft Sound System mode configuration. - - MPU-401 mode configuration. - v0.3 (ALPHA) - - Cleanups. - - Rearranged the code to let aedsp16_init_board be more general. - - Erased the REALLY_SLOW_IO. We don't need it. Erased the linux/io.h - inclusion too. We rely on os.h - - Used the to get a variable - len string (we are not sure about the len of Copyright string). - This works with any SB and compatible. - - Added the code to request_region at device init (should go in - the main body of voxware). - v0.4 (BETA) - - Better configure.c patch for aedsp16 configuration (better - logic of inclusion of AEDSP16 support) - - Modified the conditional compilation to better support more than - one sound card of the emulated type (read the NOTES above) - - Moved the sb init routine from the attach to the very first - probe in sb_card.c - - Rearrangements and cleanups - - Wiped out some unnecessary code and variables: this is kernel - code so it is better save some TEXT and DATA - - Fixed the request_region code. We must allocate the aedsp16 (sbpro) - I/O ports in any case because they are used to access the DSP - configuration registers and we can not allow anyone to get them. - v0.5 - - cleanups on comments - - prep for diffs against v3.0-proto-950402 - v0.6 - - removed the request_region()s when compiling the MODULE sound.o - because we are not allowed (by the actual voxware structure) to - release_region() - v0.7 (pre ALPHA, not distributed) - - started porting this module to kernel 1.3.84. Dummy probe/attach - routines. - v0.8 (ALPHA) - - attached all the init routines. - v0.9 (BETA) - - Integrated with linux-pre2.0.7 - - Integrated with configuration scripts. - - Cleaned up and beautyfied the code. - v0.9.9 (BETA) - - Thanks to Piercarlo Grandi: corrected the conditonal compilation code. - Now only the code configured is compiled in, with some memory saving. - v0.9.10 - - Integration into the sound/lowlevel/ section of the sound driver. - - Re-organized the code. - v0.9.11 (not distributed) - - Rewritten the init interface-routines to initialize the AEDSP16 in - one shot. - - More cosmetics. - - SC-6600 support. - - More soft/hard configuration. - v0.9.12 - - Refined the v0.9.11 code with conditional compilation to distinguish - between SC-6000 and SC-6600 code. - v1.0.0 - - Prep for merging with OSS Lite and Linux kernel 2.1.13 - - Corrected a bug in request/check/release region calls (thanks to the - new kernel exception handling). - v1.1 - - Revamped for integration with new modularized sound drivers: to enhance - the flexibility of modular version, I have removed all the conditional - compilation for SBPRO, MPU and MSS code. Now it is all managed with - the ae_config structure. - v1.2 - - Module informations added. - - Removed aedsp16_delay_10msec(), now using mdelay(10) - - All data and funcs moved to .*.init section. - v1.3 - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/09/27 - - got rid of check_region - - Known Problems: - - Audio Excel DSP 16 III don't work with this driver. - - Credits: - Many thanks to Gerald Britton <gbritton@CapAccess.org>. He helped me a - lot in testing the 0.9.11 and 0.9.12 versions of this driver. - - */ - - -#define VERSION "1.3" /* Version of Audio Excel DSP 16 driver */ - -#undef AEDSP16_DEBUG /* Define this to 1 to enable debug code */ -#undef AEDSP16_DEBUG_MORE /* Define this to 1 to enable more debug */ -#undef AEDSP16_INFO /* Define this to 1 to enable info code */ - -#if defined(AEDSP16_DEBUG) -# define DBG(x) printk x -# if defined(AEDSP16_DEBUG_MORE) -# define DBG1(x) printk x -# else -# define DBG1(x) -# endif -#else -# define DBG(x) -# define DBG1(x) -#endif - -/* - * Misc definitions - */ -#define TRUE 1 -#define FALSE 0 - -/* - * Region Size for request/check/release region. - */ -#define IOBASE_REGION_SIZE 0x10 - -/* - * Hardware related defaults - */ -#define DEF_AEDSP16_IOB 0x220 /* 0x220(default) 0x240 */ -#define DEF_AEDSP16_IRQ 7 /* 5 7(default) 9 10 11 */ -#define DEF_AEDSP16_MRQ 0 /* 5 7 9 10 0(default), 0 means disable */ -#define DEF_AEDSP16_DMA 1 /* 0 1(default) 3 */ - -/* - * Commands of AEDSP16's DSP (SBPRO+special). - * Some of them are COMMAND_xx, in the future they may change. - */ -#define WRITE_MDIRQ_CFG 0x50 /* Set M&I&DRQ mask (the real config) */ -#define COMMAND_52 0x52 /* */ -#define READ_HARD_CFG 0x58 /* Read Hardware Config (I/O base etc) */ -#define COMMAND_5C 0x5c /* */ -#define COMMAND_60 0x60 /* */ -#define COMMAND_66 0x66 /* */ -#define COMMAND_6C 0x6c /* */ -#define COMMAND_6E 0x6e /* */ -#define COMMAND_88 0x88 /* */ -#define DSP_INIT_MSS 0x8c /* Enable Microsoft Sound System mode */ -#define COMMAND_C5 0xc5 /* */ -#define GET_DSP_VERSION 0xe1 /* Get DSP Version */ -#define GET_DSP_COPYRIGHT 0xe3 /* Get DSP Copyright */ - -/* - * Offsets of AEDSP16 DSP I/O ports. The offset is added to base I/O port - * to have the actual I/O port. - * Register permissions are: - * (wo) == Write Only - * (ro) == Read Only - * (w-) == Write - * (r-) == Read - */ -#define DSP_RESET 0x06 /* offset of DSP RESET (wo) */ -#define DSP_READ 0x0a /* offset of DSP READ (ro) */ -#define DSP_WRITE 0x0c /* offset of DSP WRITE (w-) */ -#define DSP_COMMAND 0x0c /* offset of DSP COMMAND (w-) */ -#define DSP_STATUS 0x0c /* offset of DSP STATUS (r-) */ -#define DSP_DATAVAIL 0x0e /* offset of DSP DATA AVAILABLE (ro) */ - - -#define RETRY 10 /* Various retry values on I/O opera- */ -#define STATUSRETRY 1000 /* tions. Sometimes we have to */ -#define HARDRETRY 500000 /* wait for previous cmd to complete */ - -/* - * Size of character arrays that store name and version of sound card - */ -#define CARDNAMELEN 15 /* Size of the card's name in chars */ -#define CARDVERLEN 10 /* Size of the card's version in chars */ -#define CARDVERDIGITS 2 /* Number of digits in the version */ - -#if defined(CONFIG_SC6600) -/* - * Bitmapped flags of hard configuration - */ -/* - * Decode macros (xl == low byte, xh = high byte) - */ -#define IOBASE(xl) ((xl & 0x01)?0x240:0x220) -#define JOY(xl) (xl & 0x02) -#define MPUADDR(xl) ( \ - (xl & 0x0C)?0x330: \ - (xl & 0x08)?0x320: \ - (xl & 0x04)?0x310: \ - 0x300) -#define WSSADDR(xl) ((xl & 0x10)?0xE80:0x530) -#define CDROM(xh) (xh & 0x20) -#define CDROMADDR(xh) (((xh & 0x1F) << 4) + 0x200) -/* - * Encode macros - */ -#define BLDIOBASE(xl, val) { \ - xl &= ~0x01; \ - if (val == 0x240) \ - xl |= 0x01; \ - } -#define BLDJOY(xl, val) { \ - xl &= ~0x02; \ - if (val == 1) \ - xl |= 0x02; \ - } -#define BLDMPUADDR(xl, val) { \ - xl &= ~0x0C; \ - switch (val) { \ - case 0x330: \ - xl |= 0x0C; \ - break; \ - case 0x320: \ - xl |= 0x08; \ - break; \ - case 0x310: \ - xl |= 0x04; \ - break; \ - case 0x300: \ - xl |= 0x00; \ - break; \ - default: \ - xl |= 0x00; \ - break; \ - } \ - } -#define BLDWSSADDR(xl, val) { \ - xl &= ~0x10; \ - if (val == 0xE80) \ - xl |= 0x10; \ - } -#define BLDCDROM(xh, val) { \ - xh &= ~0x20; \ - if (val == 1) \ - xh |= 0x20; \ - } -#define BLDCDROMADDR(xh, val) { \ - int tmp = val; \ - tmp -= 0x200; \ - tmp >>= 4; \ - tmp &= 0x1F; \ - xh |= tmp; \ - xh &= 0x7F; \ - xh |= 0x40; \ - } -#endif /* CONFIG_SC6600 */ - -/* - * Bit mapped flags for calling aedsp16_init_board(), and saving the current - * emulation mode. - */ -#define INIT_NONE (0 ) -#define INIT_SBPRO (1<<0) -#define INIT_MSS (1<<1) -#define INIT_MPU401 (1<<2) - -static int soft_cfg __initdata = 0; /* bitmapped config */ -static int soft_cfg_mss __initdata = 0; /* bitmapped mss config */ -static int ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver: - hi->ver[0] lo->ver[1] */ - -#if defined(CONFIG_SC6600) -static int hard_cfg[2] /* lo<-hard_cfg[0] hi<-hard_cfg[1] */ - __initdata = { 0, 0}; -#endif /* CONFIG_SC6600 */ - -#if defined(CONFIG_SC6600) -/* Decoded hard configuration */ -struct d_hcfg { - int iobase; - int joystick; - int mpubase; - int wssbase; - int cdrom; - int cdrombase; -}; - -static struct d_hcfg decoded_hcfg __initdata = {0, }; - -#endif /* CONFIG_SC6600 */ - -/* orVals contain the values to be or'ed */ -struct orVals { - int val; /* irq|mirq|dma */ - int or; /* soft_cfg |= TheStruct.or */ -}; - -/* aedsp16_info contain the audio card configuration */ -struct aedsp16_info { - int base_io; /* base I/O address for accessing card */ - int irq; /* irq value for DSP I/O */ - int mpu_irq; /* irq for mpu401 interface I/O */ - int dma; /* dma value for DSP I/O */ - int mss_base; /* base I/O for Microsoft Sound System */ - int mpu_base; /* base I/O for MPU-401 emulation */ - int init; /* Initialization status of the card */ -}; - -/* - * Magic values that the DSP will eat when configuring irq/mirq/dma - */ -/* DSP IRQ conversion array */ -static struct orVals orIRQ[] __initdata = { - {0x05, 0x28}, - {0x07, 0x08}, - {0x09, 0x10}, - {0x0a, 0x18}, - {0x0b, 0x20}, - {0x00, 0x00} -}; - -/* MPU-401 IRQ conversion array */ -static struct orVals orMIRQ[] __initdata = { - {0x05, 0x04}, - {0x07, 0x44}, - {0x09, 0x84}, - {0x0a, 0xc4}, - {0x00, 0x00} -}; - -/* DMA Channels conversion array */ -static struct orVals orDMA[] __initdata = { - {0x00, 0x01}, - {0x01, 0x02}, - {0x03, 0x03}, - {0x00, 0x00} -}; - -static struct aedsp16_info ae_config = { - .base_io = DEF_AEDSP16_IOB, - .irq = DEF_AEDSP16_IRQ, - .mpu_irq = DEF_AEDSP16_MRQ, - .dma = DEF_AEDSP16_DMA, - .mss_base = -1, - .mpu_base = -1, - .init = INIT_NONE -}; - -/* - * Buffers to store audio card informations - */ -static char DSPCopyright[CARDNAMELEN + 1] __initdata = {0, }; -static char DSPVersion[CARDVERLEN + 1] __initdata = {0, }; - -static int __init aedsp16_wait_data(int port) -{ - int loop = STATUSRETRY; - unsigned char ret = 0; - - DBG1(("aedsp16_wait_data (0x%x): ", port)); - - do { - ret = inb(port + DSP_DATAVAIL); - /* - * Wait for data available (bit 7 of ret == 1) - */ - } while (!(ret & 0x80) && loop--); - - if (ret & 0x80) { - DBG1(("success.\n")); - return TRUE; - } - - DBG1(("failure.\n")); - return FALSE; -} - -static int __init aedsp16_read(int port) -{ - int inbyte; - - DBG((" Read DSP Byte (0x%x): ", port)); - - if (aedsp16_wait_data(port) == FALSE) { - DBG(("failure.\n")); - return -1; - } - - inbyte = inb(port + DSP_READ); - - DBG(("read [0x%x]/{%c}.\n", inbyte, inbyte)); - - return inbyte; -} - -static int __init aedsp16_test_dsp(int port) -{ - return ((aedsp16_read(port) == 0xaa) ? TRUE : FALSE); -} - -static int __init aedsp16_dsp_reset(int port) -{ - /* - * Reset DSP - */ - - DBG(("Reset DSP:\n")); - - outb(1, (port + DSP_RESET)); - udelay(10); - outb(0, (port + DSP_RESET)); - udelay(10); - udelay(10); - if (aedsp16_test_dsp(port) == TRUE) { - DBG(("success.\n")); - return TRUE; - } else - DBG(("failure.\n")); - return FALSE; -} - -static int __init aedsp16_write(int port, int cmd) -{ - unsigned char ret; - int loop = HARDRETRY; - - DBG((" Write DSP Byte (0x%x) [0x%x]: ", port, cmd)); - - do { - ret = inb(port + DSP_STATUS); - /* - * DSP ready to receive data if bit 7 of ret == 0 - */ - if (!(ret & 0x80)) { - outb(cmd, port + DSP_COMMAND); - DBG(("success.\n")); - return 0; - } - } while (loop--); - - DBG(("timeout.\n")); - printk("[AEDSP16] DSP Command (0x%x) timeout.\n", cmd); - - return -1; -} - -#if defined(CONFIG_SC6600) - -#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) -void __init aedsp16_pinfo(void) { - DBG(("\n Base address: %x\n", decoded_hcfg.iobase)); - DBG((" Joystick : %s present\n", decoded_hcfg.joystick?"":" not")); - DBG((" WSS addr : %x\n", decoded_hcfg.wssbase)); - DBG((" MPU-401 addr: %x\n", decoded_hcfg.mpubase)); - DBG((" CDROM : %s present\n", (decoded_hcfg.cdrom!=4)?"":" not")); - DBG((" CDROMADDR : %x\n\n", decoded_hcfg.cdrombase)); -} -#endif - -static void __init aedsp16_hard_decode(void) { - - DBG((" aedsp16_hard_decode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); - -/* - * Decode Cfg Bytes. - */ - decoded_hcfg.iobase = IOBASE(hard_cfg[0]); - decoded_hcfg.joystick = JOY(hard_cfg[0]); - decoded_hcfg.wssbase = WSSADDR(hard_cfg[0]); - decoded_hcfg.mpubase = MPUADDR(hard_cfg[0]); - decoded_hcfg.cdrom = CDROM(hard_cfg[1]); - decoded_hcfg.cdrombase = CDROMADDR(hard_cfg[1]); - -#if defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) - printk(" Original sound card configuration:\n"); - aedsp16_pinfo(); -#endif - -/* - * Now set up the real kernel configuration. - */ - decoded_hcfg.iobase = ae_config.base_io; - decoded_hcfg.wssbase = ae_config.mss_base; - decoded_hcfg.mpubase = ae_config.mpu_base; - -#if defined(CONFIG_SC6600_JOY) - decoded_hcfg.joystick = CONFIG_SC6600_JOY; /* Enable */ -#endif -#if defined(CONFIG_SC6600_CDROM) - decoded_hcfg.cdrom = CONFIG_SC6600_CDROM; /* 4:N-3:I-2:G-1:P-0:S */ -#endif -#if defined(CONFIG_SC6600_CDROMBASE) - decoded_hcfg.cdrombase = CONFIG_SC6600_CDROMBASE; /* 0 Disable */ -#endif - -#if defined(AEDSP16_DEBUG) - DBG((" New Values:\n")); - aedsp16_pinfo(); -#endif - - DBG(("success.\n")); -} - -static void __init aedsp16_hard_encode(void) { - - DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); - - hard_cfg[0] = 0; - hard_cfg[1] = 0; - - hard_cfg[0] |= 0x20; - - BLDIOBASE (hard_cfg[0], decoded_hcfg.iobase); - BLDWSSADDR(hard_cfg[0], decoded_hcfg.wssbase); - BLDMPUADDR(hard_cfg[0], decoded_hcfg.mpubase); - BLDJOY(hard_cfg[0], decoded_hcfg.joystick); - BLDCDROM(hard_cfg[1], decoded_hcfg.cdrom); - BLDCDROMADDR(hard_cfg[1], decoded_hcfg.cdrombase); - -#if defined(AEDSP16_DEBUG) - aedsp16_pinfo(); -#endif - - DBG((" aedsp16_hard_encode: 0x%x, 0x%x\n", hard_cfg[0], hard_cfg[1])); - DBG(("success.\n")); - -} - -static int __init aedsp16_hard_write(int port) { - - DBG(("aedsp16_hard_write:\n")); - - if (aedsp16_write(port, COMMAND_6C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6C); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, COMMAND_5C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, hard_cfg[0])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[0]); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, hard_cfg[1])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", hard_cfg[1]); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_write(port, COMMAND_C5)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_C5); - DBG(("failure.\n")); - return FALSE; - } - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_hard_read(int port) { - - DBG(("aedsp16_hard_read:\n")); - - if (aedsp16_write(port, READ_HARD_CFG)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - - if ((hard_cfg[0] = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - if ((hard_cfg[1] = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - if (aedsp16_read(port) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - READ_HARD_CFG); - DBG(("failure.\n")); - return FALSE; - } - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_ext_cfg_write(int port) { - - int extcfg, val; - - if (aedsp16_write(port, COMMAND_66)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_66); - return FALSE; - } - - extcfg = 7; - if (decoded_hcfg.cdrom != 2) - extcfg = 0x0F; - if ((decoded_hcfg.cdrom == 4) || - (decoded_hcfg.cdrom == 3)) - extcfg &= ~2; - if (decoded_hcfg.cdrombase == 0) - extcfg &= ~2; - if (decoded_hcfg.mpubase == 0) - extcfg &= ~1; - - if (aedsp16_write(port, extcfg)) { - printk("[AEDSP16] Write extcfg: failed!\n"); - return FALSE; - } - if (aedsp16_write(port, 0)) { - printk("[AEDSP16] Write extcfg: failed!\n"); - return FALSE; - } - if (decoded_hcfg.cdrom == 3) { - if (aedsp16_write(port, COMMAND_52)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52); - return FALSE; - } - if ((val = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n" - , COMMAND_52); - return FALSE; - } - val &= 0x7F; - if (aedsp16_write(port, COMMAND_60)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60); - return FALSE; - } - if (aedsp16_write(port, val)) { - printk("[AEDSP16] Write val: failed!\n"); - return FALSE; - } - } - - return TRUE; -} - -#endif /* CONFIG_SC6600 */ - -static int __init aedsp16_cfg_write(int port) { - if (aedsp16_write(port, WRITE_MDIRQ_CFG)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); - return FALSE; - } - if (aedsp16_write(port, soft_cfg)) { - printk("[AEDSP16] Initialization of (M)IRQ and DMA: failed!\n"); - return FALSE; - } - return TRUE; -} - -static int __init aedsp16_init_mss(int port) -{ - DBG(("aedsp16_init_mss:\n")); - - mdelay(10); - - if (aedsp16_write(port, DSP_INIT_MSS)) { - printk("[AEDSP16] aedsp16_init_mss [0x%x]: failed!\n", - DSP_INIT_MSS); - DBG(("failure.\n")); - return FALSE; - } - - mdelay(10); - - if (aedsp16_cfg_write(port) == FALSE) - return FALSE; - - outb(soft_cfg_mss, ae_config.mss_base); - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_setup_board(int port) { - int loop = RETRY; - -#if defined(CONFIG_SC6600) - int val = 0; - - if (aedsp16_hard_read(port) == FALSE) { - printk("[AEDSP16] aedsp16_hard_read: failed!\n"); - return FALSE; - } - - if (aedsp16_write(port, COMMAND_52)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_52); - return FALSE; - } - - if ((val = aedsp16_read(port)) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - COMMAND_52); - return FALSE; - } -#endif - - do { - if (aedsp16_write(port, COMMAND_88)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_88); - return FALSE; - } - mdelay(10); - } while ((aedsp16_wait_data(port) == FALSE) && loop--); - - if (aedsp16_read(port) == -1) { - printk("[AEDSP16] aedsp16_read after CMD 0x%x: failed\n", - COMMAND_88); - return FALSE; - } - -#if !defined(CONFIG_SC6600) - if (aedsp16_write(port, COMMAND_5C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); - return FALSE; - } -#endif - - if (aedsp16_cfg_write(port) == FALSE) - return FALSE; - -#if defined(CONFIG_SC6600) - if (aedsp16_write(port, COMMAND_60)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_60); - return FALSE; - } - if (aedsp16_write(port, val)) { - printk("[AEDSP16] DATA 0x%x: failed!\n", val); - return FALSE; - } - if (aedsp16_write(port, COMMAND_6E)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_6E); - return FALSE; - } - if (aedsp16_write(port, ver[0])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", ver[0]); - return FALSE; - } - if (aedsp16_write(port, ver[1])) { - printk("[AEDSP16] DATA 0x%x: failed!\n", ver[1]); - return FALSE; - } - - if (aedsp16_hard_write(port) == FALSE) { - printk("[AEDSP16] aedsp16_hard_write: failed!\n"); - return FALSE; - } - - if (aedsp16_write(port, COMMAND_5C)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", COMMAND_5C); - return FALSE; - } - -#if defined(THIS_IS_A_THING_I_HAVE_NOT_TESTED_YET) - if (aedsp16_cfg_write(port) == FALSE) - return FALSE; -#endif - -#endif - - return TRUE; -} - -static int __init aedsp16_stdcfg(int port) { - if (aedsp16_write(port, WRITE_MDIRQ_CFG)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", WRITE_MDIRQ_CFG); - return FALSE; - } - /* - * 0x0A == (IRQ 7, DMA 1, MIRQ 0) - */ - if (aedsp16_write(port, 0x0A)) { - printk("[AEDSP16] aedsp16_stdcfg: failed!\n"); - return FALSE; - } - return TRUE; -} - -static int __init aedsp16_dsp_version(int port) -{ - int len = 0; - int ret; - - DBG(("Get DSP Version:\n")); - - if (aedsp16_write(ae_config.base_io, GET_DSP_VERSION)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_VERSION); - DBG(("failed.\n")); - return FALSE; - } - - do { - if ((ret = aedsp16_read(port)) == -1) { - DBG(("failed.\n")); - return FALSE; - } - /* - * We already know how many int are stored (2), so we know when the - * string is finished. - */ - ver[len++] = ret; - } while (len < CARDVERDIGITS); - sprintf(DSPVersion, "%d.%d", ver[0], ver[1]); - - DBG(("success.\n")); - - return TRUE; -} - -static int __init aedsp16_dsp_copyright(int port) -{ - int len = 0; - int ret; - - DBG(("Get DSP Copyright:\n")); - - if (aedsp16_write(ae_config.base_io, GET_DSP_COPYRIGHT)) { - printk("[AEDSP16] CMD 0x%x: failed!\n", GET_DSP_COPYRIGHT); - DBG(("failed.\n")); - return FALSE; - } - - do { - if ((ret = aedsp16_read(port)) == -1) { - /* - * If no more data available, return to the caller, no error if len>0. - * We have no other way to know when the string is finished. - */ - if (len) - break; - else { - DBG(("failed.\n")); - return FALSE; - } - } - - DSPCopyright[len++] = ret; - - } while (len < CARDNAMELEN); - - DBG(("success.\n")); - - return TRUE; -} - -static void __init aedsp16_init_tables(void) -{ - int i = 0; - - memset(DSPCopyright, 0, CARDNAMELEN + 1); - memset(DSPVersion, 0, CARDVERLEN + 1); - - for (i = 0; orIRQ[i].or; i++) - if (orIRQ[i].val == ae_config.irq) { - soft_cfg |= orIRQ[i].or; - soft_cfg_mss |= orIRQ[i].or; - } - - for (i = 0; orMIRQ[i].or; i++) - if (orMIRQ[i].or == ae_config.mpu_irq) - soft_cfg |= orMIRQ[i].or; - - for (i = 0; orDMA[i].or; i++) - if (orDMA[i].val == ae_config.dma) { - soft_cfg |= orDMA[i].or; - soft_cfg_mss |= orDMA[i].or; - } -} - -static int __init aedsp16_init_board(void) -{ - aedsp16_init_tables(); - - if (aedsp16_dsp_reset(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_dsp_reset: failed!\n"); - return FALSE; - } - if (aedsp16_dsp_copyright(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_dsp_copyright: failed!\n"); - return FALSE; - } - - /* - * My AEDSP16 card return SC-6000 in DSPCopyright, so - * if we have something different, we have to be warned. - */ - if (strcmp("SC-6000", DSPCopyright)) - printk("[AEDSP16] Warning: non SC-6000 audio card!\n"); - - if (aedsp16_dsp_version(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_dsp_version: failed!\n"); - return FALSE; - } - - if (aedsp16_stdcfg(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_stdcfg: failed!\n"); - return FALSE; - } - -#if defined(CONFIG_SC6600) - if (aedsp16_hard_read(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_hard_read: failed!\n"); - return FALSE; - } - - aedsp16_hard_decode(); - - aedsp16_hard_encode(); - - if (aedsp16_hard_write(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_hard_write: failed!\n"); - return FALSE; - } - - if (aedsp16_ext_cfg_write(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_ext_cfg_write: failed!\n"); - return FALSE; - } -#endif /* CONFIG_SC6600 */ - - if (aedsp16_setup_board(ae_config.base_io) == FALSE) { - printk("[AEDSP16] aedsp16_setup_board: failed!\n"); - return FALSE; - } - - if (ae_config.mss_base != -1) { - if (ae_config.init & INIT_MSS) { - if (aedsp16_init_mss(ae_config.base_io) == FALSE) { - printk("[AEDSP16] Can not initialize" - "Microsoft Sound System mode.\n"); - return FALSE; - } - } - } - -#if !defined(MODULE) || defined(AEDSP16_INFO) || defined(AEDSP16_DEBUG) - - printk("Audio Excel DSP 16 init v%s (%s %s) [", - VERSION, DSPCopyright, - DSPVersion); - - if (ae_config.mpu_base != -1) { - if (ae_config.init & INIT_MPU401) { - printk("MPU401"); - if ((ae_config.init & INIT_MSS) || - (ae_config.init & INIT_SBPRO)) - printk(" "); - } - } - - if (ae_config.mss_base == -1) { - if (ae_config.init & INIT_SBPRO) { - printk("SBPro"); - if (ae_config.init & INIT_MSS) - printk(" "); - } - } - - if (ae_config.mss_base != -1) - if (ae_config.init & INIT_MSS) - printk("MSS"); - - printk("]\n"); -#endif /* MODULE || AEDSP16_INFO || AEDSP16_DEBUG */ - - mdelay(10); - - return TRUE; -} - -static int __init init_aedsp16_sb(void) -{ - DBG(("init_aedsp16_sb: ")); - -/* - * If the card is already init'ed MSS, we can not init it to SBPRO too - * because the board can not emulate simultaneously MSS and SBPRO. - */ - if (ae_config.init & INIT_MSS) - return FALSE; - if (ae_config.init & INIT_SBPRO) - return FALSE; - - ae_config.init |= INIT_SBPRO; - - DBG(("done.\n")); - - return TRUE; -} - -static void uninit_aedsp16_sb(void) -{ - DBG(("uninit_aedsp16_sb: ")); - - ae_config.init &= ~INIT_SBPRO; - - DBG(("done.\n")); -} - -static int __init init_aedsp16_mss(void) -{ - DBG(("init_aedsp16_mss: ")); - -/* - * If the card is already init'ed SBPRO, we can not init it to MSS too - * because the board can not emulate simultaneously MSS and SBPRO. - */ - if (ae_config.init & INIT_SBPRO) - return FALSE; - if (ae_config.init & INIT_MSS) - return FALSE; -/* - * We must allocate the CONFIG_AEDSP16_BASE region too because these are the - * I/O ports to access card's control registers. - */ - if (!(ae_config.init & INIT_MPU401)) { - if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE, - "aedsp16 (base)")) { - printk( - "AEDSP16 BASE I/O port region is already in use.\n"); - return FALSE; - } - } - - ae_config.init |= INIT_MSS; - - DBG(("done.\n")); - - return TRUE; -} - -static void uninit_aedsp16_mss(void) -{ - DBG(("uninit_aedsp16_mss: ")); - - if ((!(ae_config.init & INIT_MPU401)) && - (ae_config.init & INIT_MSS)) { - release_region(ae_config.base_io, IOBASE_REGION_SIZE); - DBG(("AEDSP16 base region released.\n")); - } - - ae_config.init &= ~INIT_MSS; - DBG(("done.\n")); -} - -static int __init init_aedsp16_mpu(void) -{ - DBG(("init_aedsp16_mpu: ")); - - if (ae_config.init & INIT_MPU401) - return FALSE; - -/* - * We must request the CONFIG_AEDSP16_BASE region too because these are the I/O - * ports to access card's control registers. - */ - if (!(ae_config.init & (INIT_MSS | INIT_SBPRO))) { - if (!request_region(ae_config.base_io, IOBASE_REGION_SIZE, - "aedsp16 (base)")) { - printk( - "AEDSP16 BASE I/O port region is already in use.\n"); - return FALSE; - } - } - - ae_config.init |= INIT_MPU401; - - DBG(("done.\n")); - - return TRUE; -} - -static void uninit_aedsp16_mpu(void) -{ - DBG(("uninit_aedsp16_mpu: ")); - - if ((!(ae_config.init & (INIT_MSS | INIT_SBPRO))) && - (ae_config.init & INIT_MPU401)) { - release_region(ae_config.base_io, IOBASE_REGION_SIZE); - DBG(("AEDSP16 base region released.\n")); - } - - ae_config.init &= ~INIT_MPU401; - - DBG(("done.\n")); -} - -static int __init init_aedsp16(void) -{ - int initialized = FALSE; - - DBG(("Initializing BASE[0x%x] IRQ[%d] DMA[%d] MIRQ[%d]\n", - ae_config.base_io,ae_config.irq,ae_config.dma,ae_config.mpu_irq)); - - if (ae_config.mss_base == -1) { - if (init_aedsp16_sb() == FALSE) { - uninit_aedsp16_sb(); - } else { - initialized = TRUE; - } - } - - if (ae_config.mpu_base != -1) { - if (init_aedsp16_mpu() == FALSE) { - uninit_aedsp16_mpu(); - } else { - initialized = TRUE; - } - } - -/* - * In the sequence of init routines, the MSS init MUST be the last! - * This because of the special register programming the MSS mode needs. - * A board reset would disable the MSS mode restoring the default SBPRO - * mode. - */ - if (ae_config.mss_base != -1) { - if (init_aedsp16_mss() == FALSE) { - uninit_aedsp16_mss(); - } else { - initialized = TRUE; - } - } - - if (initialized) - initialized = aedsp16_init_board(); - return initialized; -} - -static void __exit uninit_aedsp16(void) -{ - if (ae_config.mss_base != -1) - uninit_aedsp16_mss(); - else - uninit_aedsp16_sb(); - if (ae_config.mpu_base != -1) - uninit_aedsp16_mpu(); -} - -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata mpu_irq = -1; -static int __initdata mss_base = -1; -static int __initdata mpu_base = -1; - -module_param_hw(io, int, ioport, 0); -MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)"); -module_param_hw(irq, int, irq, 0); -MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)"); -module_param_hw(dma, int, dma, 0); -MODULE_PARM_DESC(dma, "dma line (0 1 3)"); -module_param_hw(mpu_irq, int, irq, 0); -MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)"); -module_param_hw(mss_base, int, ioport, 0); -MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)"); -module_param_hw(mpu_base, int, ioport, 0); -MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)"); -MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>"); -MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION); -MODULE_LICENSE("GPL"); - -static int __init do_init_aedsp16(void) { - printk("Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98\n"); - if (io == -1 || dma == -1 || irq == -1) { - printk(KERN_INFO "aedsp16: I/O, IRQ and DMA are mandatory\n"); - return -EINVAL; - } - - ae_config.base_io = io; - ae_config.irq = irq; - ae_config.dma = dma; - - ae_config.mss_base = mss_base; - ae_config.mpu_base = mpu_base; - ae_config.mpu_irq = mpu_irq; - - if (init_aedsp16() == FALSE) { - printk(KERN_ERR "aedsp16: initialization failed\n"); - /* - * XXX - * What error should we return here ? - */ - return -EINVAL; - } - return 0; -} - -static void __exit cleanup_aedsp16(void) { - uninit_aedsp16(); -} - -module_init(do_init_aedsp16); -module_exit(cleanup_aedsp16); - -#ifndef MODULE -static int __init setup_aedsp16(char *str) -{ - /* io, irq, dma, mss_io, mpu_io, mpu_irq */ - int ints[7]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - mss_base = ints[4]; - mpu_base = ints[5]; - mpu_irq = ints[6]; - return 1; -} - -__setup("aedsp16=", setup_aedsp16); -#endif diff --git a/sound/oss/audio.c b/sound/oss/audio.c deleted file mode 100644 index 09c932f899b8..000000000000 --- a/sound/oss/audio.c +++ /dev/null @@ -1,985 +0,0 @@ -/* - * sound/oss/audio.c - * - * Device file manager for /dev/audio - */ - -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Thomas Sailer : moved several static variables into struct audio_operations - * (which is grossly misnamed btw.) because they have the same - * lifetime as the rest in there and dynamic allocation saves - * 12k or so - * Thomas Sailer : use more logical O_NONBLOCK semantics - * Daniel Rodriksson: reworked the use of the device specific copy_user - * still generic - * Horst von Brand: Add missing #include <linux/string.h> - * Chris Rankin : Update the module-usage counter for the coprocessor, - * and decrement the counters again if we cannot open - * the audio device. - */ - -#include <linux/stddef.h> -#include <linux/string.h> -#include <linux/kmod.h> - -#include "sound_config.h" -#include "ulaw.h" -#include "coproc.h" - -#define NEUTRAL8 0x80 -#define NEUTRAL16 0x00 - - -static int dma_ioctl(int dev, unsigned int cmd, void __user *arg); - -static int set_format(int dev, int fmt) -{ - if (fmt != AFMT_QUERY) - { - audio_devs[dev]->local_conversion = 0; - - if (!(audio_devs[dev]->format_mask & fmt)) /* Not supported */ - { - if (fmt == AFMT_MU_LAW) - { - fmt = AFMT_U8; - audio_devs[dev]->local_conversion = CNV_MU_LAW; - } - else - fmt = AFMT_U8; /* This is always supported */ - } - audio_devs[dev]->audio_format = audio_devs[dev]->d->set_bits(dev, fmt); - audio_devs[dev]->local_format = fmt; - } - else - return audio_devs[dev]->local_format; - - if (audio_devs[dev]->local_conversion) - return audio_devs[dev]->local_conversion; - else - return audio_devs[dev]->local_format; -} - -int audio_open(int dev, struct file *file) -{ - int ret; - int bits; - int dev_type = dev & 0x0f; - int mode = translate_mode(file); - const struct audio_driver *driver; - const struct coproc_operations *coprocessor; - - dev = dev >> 4; - - if (dev_type == SND_DEV_DSP16) - bits = 16; - else - bits = 8; - - if (dev < 0 || dev >= num_audiodevs) - return -ENXIO; - - driver = audio_devs[dev]->d; - - if (!try_module_get(driver->owner)) - return -ENODEV; - - if ((ret = DMAbuf_open(dev, mode)) < 0) - goto error_1; - - if ( (coprocessor = audio_devs[dev]->coproc) != NULL ) { - if (!try_module_get(coprocessor->owner)) - goto error_2; - - if ((ret = coprocessor->open(coprocessor->devc, COPR_PCM)) < 0) { - printk(KERN_WARNING "Sound: Can't access coprocessor device\n"); - goto error_3; - } - } - - audio_devs[dev]->local_conversion = 0; - - if (dev_type == SND_DEV_AUDIO) - set_format(dev, AFMT_MU_LAW); - else - set_format(dev, bits); - - audio_devs[dev]->audio_mode = AM_NONE; - - return 0; - - /* - * Clean-up stack: this is what needs (un)doing if - * we can't open the audio device ... - */ - error_3: - module_put(coprocessor->owner); - - error_2: - DMAbuf_release(dev, mode); - - error_1: - module_put(driver->owner); - - return ret; -} - -static void sync_output(int dev) -{ - int p, i; - int l; - struct dma_buffparms *dmap = audio_devs[dev]->dmap_out; - - if (dmap->fragment_size <= 0) - return; - dmap->flags |= DMA_POST; - - /* Align the write pointer with fragment boundaries */ - - if ((l = dmap->user_counter % dmap->fragment_size) > 0) - { - int len; - unsigned long offs = dmap->user_counter % dmap->bytes_in_use; - - len = dmap->fragment_size - l; - memset(dmap->raw_buf + offs, dmap->neutral_byte, len); - DMAbuf_move_wrpointer(dev, len); - } - - /* - * Clean all unused buffer fragments. - */ - - p = dmap->qtail; - dmap->flags |= DMA_POST; - - for (i = dmap->qlen + 1; i < dmap->nbufs; i++) - { - p = (p + 1) % dmap->nbufs; - if (((dmap->raw_buf + p * dmap->fragment_size) + dmap->fragment_size) > - (dmap->raw_buf + dmap->buffsize)) - printk(KERN_ERR "audio: Buffer error 2\n"); - - memset(dmap->raw_buf + p * dmap->fragment_size, - dmap->neutral_byte, - dmap->fragment_size); - } - - dmap->flags |= DMA_DIRTY; -} - -void audio_release(int dev, struct file *file) -{ - const struct coproc_operations *coprocessor; - int mode = translate_mode(file); - - dev = dev >> 4; - - /* - * We do this in DMAbuf_release(). Why are we doing it - * here? Why don't we test the file mode before setting - * both flags? DMAbuf_release() does. - * ...pester...pester...pester... - */ - audio_devs[dev]->dmap_out->closing = 1; - audio_devs[dev]->dmap_in->closing = 1; - - /* - * We need to make sure we allocated the dmap_out buffer - * before we go mucking around with it in sync_output(). - */ - if (mode & OPEN_WRITE) - sync_output(dev); - - if ( (coprocessor = audio_devs[dev]->coproc) != NULL ) { - coprocessor->close(coprocessor->devc, COPR_PCM); - module_put(coprocessor->owner); - } - DMAbuf_release(dev, mode); - - module_put(audio_devs[dev]->d->owner); -} - -static void translate_bytes(const unsigned char *table, unsigned char *buff, int n) -{ - unsigned long i; - - if (n <= 0) - return; - - for (i = 0; i < n; ++i) - buff[i] = table[buff[i]]; -} - -int audio_write(int dev, struct file *file, const char __user *buf, int count) -{ - int c, p, l, buf_size, used, returned; - int err; - char *dma_buf; - - dev = dev >> 4; - - p = 0; - c = count; - - if(count < 0) - return -EINVAL; - - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return -EPERM; - - if (audio_devs[dev]->flags & DMA_DUPLEX) - audio_devs[dev]->audio_mode |= AM_WRITE; - else - audio_devs[dev]->audio_mode = AM_WRITE; - - if (!count) /* Flush output */ - { - sync_output(dev); - return 0; - } - - while (c) - { - if ((err = DMAbuf_getwrbuffer(dev, &dma_buf, &buf_size, !!(file->f_flags & O_NONBLOCK))) < 0) - { - /* Handle nonblocking mode */ - if ((file->f_flags & O_NONBLOCK) && err == -EAGAIN) - return p? p : -EAGAIN; /* No more space. Return # of accepted bytes */ - return err; - } - l = c; - - if (l > buf_size) - l = buf_size; - - returned = l; - used = l; - if (!audio_devs[dev]->d->copy_user) - { - if ((dma_buf + l) > - (audio_devs[dev]->dmap_out->raw_buf + audio_devs[dev]->dmap_out->buffsize)) - { - printk(KERN_ERR "audio: Buffer error 3 (%lx,%d), (%lx, %d)\n", (long) dma_buf, l, (long) audio_devs[dev]->dmap_out->raw_buf, (int) audio_devs[dev]->dmap_out->buffsize); - return -EDOM; - } - if (dma_buf < audio_devs[dev]->dmap_out->raw_buf) - { - printk(KERN_ERR "audio: Buffer error 13 (%lx<%lx)\n", (long) dma_buf, (long) audio_devs[dev]->dmap_out->raw_buf); - return -EDOM; - } - if(copy_from_user(dma_buf, &(buf)[p], l)) - return -EFAULT; - } - else audio_devs[dev]->d->copy_user (dev, - dma_buf, 0, - buf, p, - c, buf_size, - &used, &returned, - l); - l = returned; - - if (audio_devs[dev]->local_conversion & CNV_MU_LAW) - { - translate_bytes(ulaw_dsp, (unsigned char *) dma_buf, l); - } - c -= used; - p += used; - DMAbuf_move_wrpointer(dev, l); - - } - - return count; -} - -int audio_read(int dev, struct file *file, char __user *buf, int count) -{ - int c, p, l; - char *dmabuf; - int buf_no; - - dev = dev >> 4; - p = 0; - c = count; - - if (!(audio_devs[dev]->open_mode & OPEN_READ)) - return -EPERM; - - if ((audio_devs[dev]->audio_mode & AM_WRITE) && !(audio_devs[dev]->flags & DMA_DUPLEX)) - sync_output(dev); - - if (audio_devs[dev]->flags & DMA_DUPLEX) - audio_devs[dev]->audio_mode |= AM_READ; - else - audio_devs[dev]->audio_mode = AM_READ; - - while(c) - { - if ((buf_no = DMAbuf_getrdbuffer(dev, &dmabuf, &l, !!(file->f_flags & O_NONBLOCK))) < 0) - { - /* - * Nonblocking mode handling. Return current # of bytes - */ - - if (p > 0) /* Avoid throwing away data */ - return p; /* Return it instead */ - - if ((file->f_flags & O_NONBLOCK) && buf_no == -EAGAIN) - return -EAGAIN; - - return buf_no; - } - if (l > c) - l = c; - - /* - * Insert any local processing here. - */ - - if (audio_devs[dev]->local_conversion & CNV_MU_LAW) - { - translate_bytes(dsp_ulaw, (unsigned char *) dmabuf, l); - } - - { - char *fixit = dmabuf; - - if(copy_to_user(&(buf)[p], fixit, l)) - return -EFAULT; - } - - DMAbuf_rmchars(dev, buf_no, l); - - p += l; - c -= l; - } - - return count - c; -} - -int audio_ioctl(int dev, struct file *file, unsigned int cmd, void __user *arg) -{ - int val, count; - unsigned long flags; - struct dma_buffparms *dmap; - int __user *p = arg; - - dev = dev >> 4; - - if (_IOC_TYPE(cmd) == 'C') { - if (audio_devs[dev]->coproc) /* Coprocessor ioctl */ - return audio_devs[dev]->coproc->ioctl(audio_devs[dev]->coproc->devc, cmd, arg, 0); - /* else - printk(KERN_DEBUG"/dev/dsp%d: No coprocessor for this device\n", dev); */ - return -ENXIO; - } - else switch (cmd) - { - case SNDCTL_DSP_SYNC: - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return 0; - if (audio_devs[dev]->dmap_out->fragment_size == 0) - return 0; - sync_output(dev); - DMAbuf_sync(dev); - DMAbuf_reset(dev); - return 0; - - case SNDCTL_DSP_POST: - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return 0; - if (audio_devs[dev]->dmap_out->fragment_size == 0) - return 0; - audio_devs[dev]->dmap_out->flags |= DMA_POST | DMA_DIRTY; - sync_output(dev); - dma_ioctl(dev, SNDCTL_DSP_POST, NULL); - return 0; - - case SNDCTL_DSP_RESET: - audio_devs[dev]->audio_mode = AM_NONE; - DMAbuf_reset(dev); - return 0; - - case SNDCTL_DSP_GETFMTS: - val = audio_devs[dev]->format_mask | AFMT_MU_LAW; - break; - - case SNDCTL_DSP_SETFMT: - if (get_user(val, p)) - return -EFAULT; - val = set_format(dev, val); - break; - - case SNDCTL_DSP_GETISPACE: - if (!(audio_devs[dev]->open_mode & OPEN_READ)) - return 0; - if ((audio_devs[dev]->audio_mode & AM_WRITE) && !(audio_devs[dev]->flags & DMA_DUPLEX)) - return -EBUSY; - return dma_ioctl(dev, cmd, arg); - - case SNDCTL_DSP_GETOSPACE: - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return -EPERM; - if ((audio_devs[dev]->audio_mode & AM_READ) && !(audio_devs[dev]->flags & DMA_DUPLEX)) - return -EBUSY; - return dma_ioctl(dev, cmd, arg); - - case SNDCTL_DSP_NONBLOCK: - spin_lock(&file->f_lock); - file->f_flags |= O_NONBLOCK; - spin_unlock(&file->f_lock); - return 0; - - case SNDCTL_DSP_GETCAPS: - val = 1 | DSP_CAP_MMAP; /* Revision level of this ioctl() */ - if (audio_devs[dev]->flags & DMA_DUPLEX && - audio_devs[dev]->open_mode == OPEN_READWRITE) - val |= DSP_CAP_DUPLEX; - if (audio_devs[dev]->coproc) - val |= DSP_CAP_COPROC; - if (audio_devs[dev]->d->local_qlen) /* Device has hidden buffers */ - val |= DSP_CAP_BATCH; - if (audio_devs[dev]->d->trigger) /* Supports SETTRIGGER */ - val |= DSP_CAP_TRIGGER; - break; - - case SOUND_PCM_WRITE_RATE: - if (get_user(val, p)) - return -EFAULT; - val = audio_devs[dev]->d->set_speed(dev, val); - break; - - case SOUND_PCM_READ_RATE: - val = audio_devs[dev]->d->set_speed(dev, 0); - break; - - case SNDCTL_DSP_STEREO: - if (get_user(val, p)) - return -EFAULT; - if (val > 1 || val < 0) - return -EINVAL; - val = audio_devs[dev]->d->set_channels(dev, val + 1) - 1; - break; - - case SOUND_PCM_WRITE_CHANNELS: - if (get_user(val, p)) - return -EFAULT; - val = audio_devs[dev]->d->set_channels(dev, val); - break; - - case SOUND_PCM_READ_CHANNELS: - val = audio_devs[dev]->d->set_channels(dev, 0); - break; - - case SOUND_PCM_READ_BITS: - val = audio_devs[dev]->d->set_bits(dev, 0); - break; - - case SNDCTL_DSP_SETDUPLEX: - if (audio_devs[dev]->open_mode != OPEN_READWRITE) - return -EPERM; - return (audio_devs[dev]->flags & DMA_DUPLEX) ? 0 : -EIO; - - case SNDCTL_DSP_PROFILE: - if (get_user(val, p)) - return -EFAULT; - if (audio_devs[dev]->open_mode & OPEN_WRITE) - audio_devs[dev]->dmap_out->applic_profile = val; - if (audio_devs[dev]->open_mode & OPEN_READ) - audio_devs[dev]->dmap_in->applic_profile = val; - return 0; - - case SNDCTL_DSP_GETODELAY: - dmap = audio_devs[dev]->dmap_out; - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return -EINVAL; - if (!(dmap->flags & DMA_ALLOC_DONE)) - { - val=0; - break; - } - - spin_lock_irqsave(&dmap->lock,flags); - /* Compute number of bytes that have been played */ - count = DMAbuf_get_buffer_pointer (dev, dmap, DMODE_OUTPUT); - if (count < dmap->fragment_size && dmap->qhead != 0) - count += dmap->bytes_in_use; /* Pointer wrap not handled yet */ - count += dmap->byte_counter; - - /* Subtract current count from the number of bytes written by app */ - count = dmap->user_counter - count; - if (count < 0) - count = 0; - spin_unlock_irqrestore(&dmap->lock,flags); - val = count; - break; - - default: - return dma_ioctl(dev, cmd, arg); - } - return put_user(val, p); -} - -void audio_init_devices(void) -{ - /* - * NOTE! This routine could be called several times during boot. - */ -} - -void reorganize_buffers(int dev, struct dma_buffparms *dmap, int recording) -{ - /* - * This routine breaks the physical device buffers to logical ones. - */ - - struct audio_operations *dsp_dev = audio_devs[dev]; - - unsigned i, n; - unsigned sr, nc, sz, bsz; - - sr = dsp_dev->d->set_speed(dev, 0); - nc = dsp_dev->d->set_channels(dev, 0); - sz = dsp_dev->d->set_bits(dev, 0); - - if (sz == 8) - dmap->neutral_byte = NEUTRAL8; - else - dmap->neutral_byte = NEUTRAL16; - - if (sr < 1 || nc < 1 || sz < 1) - { -/* printk(KERN_DEBUG "Warning: Invalid PCM parameters[%d] sr=%d, nc=%d, sz=%d\n", dev, sr, nc, sz);*/ - sr = DSP_DEFAULT_SPEED; - nc = 1; - sz = 8; - } - - sz = sr * nc * sz; - - sz /= 8; /* #bits -> #bytes */ - dmap->data_rate = sz; - - if (!dmap->needs_reorg) - return; - dmap->needs_reorg = 0; - - if (dmap->fragment_size == 0) - { - /* Compute the fragment size using the default algorithm */ - - /* - * Compute a buffer size for time not exceeding 1 second. - * Usually this algorithm gives a buffer size for 0.5 to 1.0 seconds - * of sound (using the current speed, sample size and #channels). - */ - - bsz = dmap->buffsize; - while (bsz > sz) - bsz /= 2; - - if (bsz == dmap->buffsize) - bsz /= 2; /* Needs at least 2 buffers */ - - /* - * Split the computed fragment to smaller parts. After 3.5a9 - * the default subdivision is 4 which should give better - * results when recording. - */ - - if (dmap->subdivision == 0) /* Not already set */ - { - dmap->subdivision = 4; /* Init to the default value */ - - if ((bsz / dmap->subdivision) > 4096) - dmap->subdivision *= 2; - if ((bsz / dmap->subdivision) < 4096) - dmap->subdivision = 1; - } - bsz /= dmap->subdivision; - - if (bsz < 16) - bsz = 16; /* Just a sanity check */ - - dmap->fragment_size = bsz; - } - else - { - /* - * The process has specified the buffer size with SNDCTL_DSP_SETFRAGMENT or - * the buffer size computation has already been done. - */ - if (dmap->fragment_size > (dmap->buffsize / 2)) - dmap->fragment_size = (dmap->buffsize / 2); - bsz = dmap->fragment_size; - } - - if (audio_devs[dev]->min_fragment) - if (bsz < (1 << audio_devs[dev]->min_fragment)) - bsz = 1 << audio_devs[dev]->min_fragment; - if (audio_devs[dev]->max_fragment) - if (bsz > (1 << audio_devs[dev]->max_fragment)) - bsz = 1 << audio_devs[dev]->max_fragment; - bsz &= ~0x07; /* Force size which is multiple of 8 bytes */ -#ifdef OS_DMA_ALIGN_CHECK - OS_DMA_ALIGN_CHECK(bsz); -#endif - - n = dmap->buffsize / bsz; - if (n > MAX_SUB_BUFFERS) - n = MAX_SUB_BUFFERS; - if (n > dmap->max_fragments) - n = dmap->max_fragments; - - if (n < 2) - { - n = 2; - bsz /= 2; - } - dmap->nbufs = n; - dmap->bytes_in_use = n * bsz; - dmap->fragment_size = bsz; - dmap->max_byte_counter = (dmap->data_rate * 60 * 60) + - dmap->bytes_in_use; /* Approximately one hour */ - - if (dmap->raw_buf) - { - memset(dmap->raw_buf, dmap->neutral_byte, dmap->bytes_in_use); - } - - for (i = 0; i < dmap->nbufs; i++) - { - dmap->counts[i] = 0; - } - - dmap->flags |= DMA_ALLOC_DONE | DMA_EMPTY; -} - -static int dma_subdivide(int dev, struct dma_buffparms *dmap, int fact) -{ - if (fact == 0) - { - fact = dmap->subdivision; - if (fact == 0) - fact = 1; - return fact; - } - if (dmap->subdivision != 0 || dmap->fragment_size) /* Too late to change */ - return -EINVAL; - - if (fact > MAX_REALTIME_FACTOR) - return -EINVAL; - - if (fact != 1 && fact != 2 && fact != 4 && fact != 8 && fact != 16) - return -EINVAL; - - dmap->subdivision = fact; - return fact; -} - -static int dma_set_fragment(int dev, struct dma_buffparms *dmap, int fact) -{ - int bytes, count; - - if (fact == 0) - return -EIO; - - if (dmap->subdivision != 0 || - dmap->fragment_size) /* Too late to change */ - return -EINVAL; - - bytes = fact & 0xffff; - count = (fact >> 16) & 0x7fff; - - if (count == 0) - count = MAX_SUB_BUFFERS; - else if (count < MAX_SUB_BUFFERS) - count++; - - if (bytes < 4 || bytes > 17) /* <16 || > 512k */ - return -EINVAL; - - if (count < 2) - return -EINVAL; - - if (audio_devs[dev]->min_fragment > 0) - if (bytes < audio_devs[dev]->min_fragment) - bytes = audio_devs[dev]->min_fragment; - - if (audio_devs[dev]->max_fragment > 0) - if (bytes > audio_devs[dev]->max_fragment) - bytes = audio_devs[dev]->max_fragment; - -#ifdef OS_DMA_MINBITS - if (bytes < OS_DMA_MINBITS) - bytes = OS_DMA_MINBITS; -#endif - - dmap->fragment_size = (1 << bytes); - dmap->max_fragments = count; - - if (dmap->fragment_size > dmap->buffsize) - dmap->fragment_size = dmap->buffsize; - - if (dmap->fragment_size == dmap->buffsize && - audio_devs[dev]->flags & DMA_AUTOMODE) - dmap->fragment_size /= 2; /* Needs at least 2 buffers */ - - dmap->subdivision = 1; /* Disable SNDCTL_DSP_SUBDIVIDE */ - return bytes | ((count - 1) << 16); -} - -static int dma_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - struct dma_buffparms *dmap_out = audio_devs[dev]->dmap_out; - struct dma_buffparms *dmap_in = audio_devs[dev]->dmap_in; - struct dma_buffparms *dmap; - audio_buf_info info; - count_info cinfo; - int fact, ret, changed, bits, count, err; - unsigned long flags; - - switch (cmd) - { - case SNDCTL_DSP_SUBDIVIDE: - ret = 0; - if (get_user(fact, (int __user *)arg)) - return -EFAULT; - if (audio_devs[dev]->open_mode & OPEN_WRITE) - ret = dma_subdivide(dev, dmap_out, fact); - if (ret < 0) - return ret; - if (audio_devs[dev]->open_mode != OPEN_WRITE || - (audio_devs[dev]->flags & DMA_DUPLEX && - audio_devs[dev]->open_mode & OPEN_READ)) - ret = dma_subdivide(dev, dmap_in, fact); - if (ret < 0) - return ret; - break; - - case SNDCTL_DSP_GETISPACE: - case SNDCTL_DSP_GETOSPACE: - dmap = dmap_out; - if (cmd == SNDCTL_DSP_GETISPACE && !(audio_devs[dev]->open_mode & OPEN_READ)) - return -EINVAL; - if (cmd == SNDCTL_DSP_GETOSPACE && !(audio_devs[dev]->open_mode & OPEN_WRITE)) - return -EINVAL; - if (cmd == SNDCTL_DSP_GETISPACE && audio_devs[dev]->flags & DMA_DUPLEX) - dmap = dmap_in; - if (dmap->mapping_flags & DMA_MAP_MAPPED) - return -EINVAL; - if (!(dmap->flags & DMA_ALLOC_DONE)) - reorganize_buffers(dev, dmap, (cmd == SNDCTL_DSP_GETISPACE)); - info.fragstotal = dmap->nbufs; - if (cmd == SNDCTL_DSP_GETISPACE) - info.fragments = dmap->qlen; - else - { - if (!DMAbuf_space_in_queue(dev)) - info.fragments = 0; - else - { - info.fragments = DMAbuf_space_in_queue(dev); - if (audio_devs[dev]->d->local_qlen) - { - int tmp = audio_devs[dev]->d->local_qlen(dev); - if (tmp && info.fragments) - tmp--; /* - * This buffer has been counted twice - */ - info.fragments -= tmp; - } - } - } - if (info.fragments < 0) - info.fragments = 0; - else if (info.fragments > dmap->nbufs) - info.fragments = dmap->nbufs; - - info.fragsize = dmap->fragment_size; - info.bytes = info.fragments * dmap->fragment_size; - - if (cmd == SNDCTL_DSP_GETISPACE && dmap->qlen) - info.bytes -= dmap->counts[dmap->qhead]; - else - { - info.fragments = info.bytes / dmap->fragment_size; - info.bytes -= dmap->user_counter % dmap->fragment_size; - } - if (copy_to_user(arg, &info, sizeof(info))) - return -EFAULT; - return 0; - - case SNDCTL_DSP_SETTRIGGER: - if (get_user(bits, (int __user *)arg)) - return -EFAULT; - bits &= audio_devs[dev]->open_mode; - if (audio_devs[dev]->d->trigger == NULL) - return -EINVAL; - if (!(audio_devs[dev]->flags & DMA_DUPLEX) && (bits & PCM_ENABLE_INPUT) && - (bits & PCM_ENABLE_OUTPUT)) - return -EINVAL; - - if (bits & PCM_ENABLE_INPUT) - { - spin_lock_irqsave(&dmap_in->lock,flags); - changed = (audio_devs[dev]->enable_bits ^ bits) & PCM_ENABLE_INPUT; - if (changed && audio_devs[dev]->go) - { - reorganize_buffers(dev, dmap_in, 1); - if ((err = audio_devs[dev]->d->prepare_for_input(dev, - dmap_in->fragment_size, dmap_in->nbufs)) < 0) { - spin_unlock_irqrestore(&dmap_in->lock,flags); - return err; - } - dmap_in->dma_mode = DMODE_INPUT; - audio_devs[dev]->enable_bits |= PCM_ENABLE_INPUT; - DMAbuf_activate_recording(dev, dmap_in); - } else - audio_devs[dev]->enable_bits &= ~PCM_ENABLE_INPUT; - spin_unlock_irqrestore(&dmap_in->lock,flags); - } - if (bits & PCM_ENABLE_OUTPUT) - { - spin_lock_irqsave(&dmap_out->lock,flags); - changed = (audio_devs[dev]->enable_bits ^ bits) & PCM_ENABLE_OUTPUT; - if (changed && - (dmap_out->mapping_flags & DMA_MAP_MAPPED || dmap_out->qlen > 0) && - audio_devs[dev]->go) - { - if (!(dmap_out->flags & DMA_ALLOC_DONE)) - reorganize_buffers(dev, dmap_out, 0); - dmap_out->dma_mode = DMODE_OUTPUT; - audio_devs[dev]->enable_bits |= PCM_ENABLE_OUTPUT; - dmap_out->counts[dmap_out->qhead] = dmap_out->fragment_size; - DMAbuf_launch_output(dev, dmap_out); - } else - audio_devs[dev]->enable_bits &= ~PCM_ENABLE_OUTPUT; - spin_unlock_irqrestore(&dmap_out->lock,flags); - } -#if 0 - if (changed && audio_devs[dev]->d->trigger) - audio_devs[dev]->d->trigger(dev, bits * audio_devs[dev]->go); -#endif - /* Falls through... */ - - case SNDCTL_DSP_GETTRIGGER: - ret = audio_devs[dev]->enable_bits; - break; - - case SNDCTL_DSP_SETSYNCRO: - if (!audio_devs[dev]->d->trigger) - return -EINVAL; - audio_devs[dev]->d->trigger(dev, 0); - audio_devs[dev]->go = 0; - return 0; - - case SNDCTL_DSP_GETIPTR: - if (!(audio_devs[dev]->open_mode & OPEN_READ)) - return -EINVAL; - spin_lock_irqsave(&dmap_in->lock,flags); - cinfo.bytes = dmap_in->byte_counter; - cinfo.ptr = DMAbuf_get_buffer_pointer(dev, dmap_in, DMODE_INPUT) & ~3; - if (cinfo.ptr < dmap_in->fragment_size && dmap_in->qtail != 0) - cinfo.bytes += dmap_in->bytes_in_use; /* Pointer wrap not handled yet */ - cinfo.blocks = dmap_in->qlen; - cinfo.bytes += cinfo.ptr; - if (dmap_in->mapping_flags & DMA_MAP_MAPPED) - dmap_in->qlen = 0; /* Reset interrupt counter */ - spin_unlock_irqrestore(&dmap_in->lock,flags); - if (copy_to_user(arg, &cinfo, sizeof(cinfo))) - return -EFAULT; - return 0; - - case SNDCTL_DSP_GETOPTR: - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return -EINVAL; - - spin_lock_irqsave(&dmap_out->lock,flags); - cinfo.bytes = dmap_out->byte_counter; - cinfo.ptr = DMAbuf_get_buffer_pointer(dev, dmap_out, DMODE_OUTPUT) & ~3; - if (cinfo.ptr < dmap_out->fragment_size && dmap_out->qhead != 0) - cinfo.bytes += dmap_out->bytes_in_use; /* Pointer wrap not handled yet */ - cinfo.blocks = dmap_out->qlen; - cinfo.bytes += cinfo.ptr; - if (dmap_out->mapping_flags & DMA_MAP_MAPPED) - dmap_out->qlen = 0; /* Reset interrupt counter */ - spin_unlock_irqrestore(&dmap_out->lock,flags); - if (copy_to_user(arg, &cinfo, sizeof(cinfo))) - return -EFAULT; - return 0; - - case SNDCTL_DSP_GETODELAY: - if (!(audio_devs[dev]->open_mode & OPEN_WRITE)) - return -EINVAL; - if (!(dmap_out->flags & DMA_ALLOC_DONE)) - { - ret=0; - break; - } - spin_lock_irqsave(&dmap_out->lock,flags); - /* Compute number of bytes that have been played */ - count = DMAbuf_get_buffer_pointer (dev, dmap_out, DMODE_OUTPUT); - if (count < dmap_out->fragment_size && dmap_out->qhead != 0) - count += dmap_out->bytes_in_use; /* Pointer wrap not handled yet */ - count += dmap_out->byte_counter; - /* Subtract current count from the number of bytes written by app */ - count = dmap_out->user_counter - count; - if (count < 0) - count = 0; - spin_unlock_irqrestore(&dmap_out->lock,flags); - ret = count; - break; - - case SNDCTL_DSP_POST: - if (audio_devs[dev]->dmap_out->qlen > 0) - if (!(audio_devs[dev]->dmap_out->flags & DMA_ACTIVE)) - DMAbuf_launch_output(dev, audio_devs[dev]->dmap_out); - return 0; - - case SNDCTL_DSP_GETBLKSIZE: - dmap = dmap_out; - if (audio_devs[dev]->open_mode & OPEN_WRITE) - reorganize_buffers(dev, dmap_out, (audio_devs[dev]->open_mode == OPEN_READ)); - if (audio_devs[dev]->open_mode == OPEN_READ || - (audio_devs[dev]->flags & DMA_DUPLEX && - audio_devs[dev]->open_mode & OPEN_READ)) - reorganize_buffers(dev, dmap_in, (audio_devs[dev]->open_mode == OPEN_READ)); - if (audio_devs[dev]->open_mode == OPEN_READ) - dmap = dmap_in; - ret = dmap->fragment_size; - break; - - case SNDCTL_DSP_SETFRAGMENT: - ret = 0; - if (get_user(fact, (int __user *)arg)) - return -EFAULT; - if (audio_devs[dev]->open_mode & OPEN_WRITE) - ret = dma_set_fragment(dev, dmap_out, fact); - if (ret < 0) - return ret; - if (audio_devs[dev]->open_mode == OPEN_READ || - (audio_devs[dev]->flags & DMA_DUPLEX && - audio_devs[dev]->open_mode & OPEN_READ)) - ret = dma_set_fragment(dev, dmap_in, fact); - if (ret < 0) - return ret; - if (!arg) /* don't know what this is good for, but preserve old semantics */ - return 0; - break; - - default: - if (!audio_devs[dev]->d->ioctl) - return -EINVAL; - return audio_devs[dev]->d->ioctl(dev, cmd, arg); - } - return put_user(ret, (int __user *)arg); -} diff --git a/sound/oss/bin2hex.c b/sound/oss/bin2hex.c deleted file mode 100644 index b59109eb0db4..000000000000 --- a/sound/oss/bin2hex.c +++ /dev/null @@ -1,39 +0,0 @@ -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -int main( int argc, const char * argv [] ) -{ - const char * varname; - int i = 0; - int c; - int id = 0; - - if(argv[1] && strcmp(argv[1],"-i")==0) - { - argv++; - argc--; - id=1; - } - - if(argc==1) - { - fprintf(stderr, "bin2hex: [-i] firmware\n"); - exit(1); - } - - varname = argv[1]; - printf( "/* automatically generated by bin2hex */\n" ); - printf( "static unsigned char %s [] %s =\n{\n", varname , id?"__initdata":""); - - while ( ( c = getchar( ) ) != EOF ) - { - if ( i != 0 && i % 10 == 0 ) - printf( "\n" ); - printf( "0x%02lx,", c & 0xFFl ); - i++; - } - - printf( "};\nstatic int %sLen = %d;\n", varname, i ); - return 0; -} diff --git a/sound/oss/coproc.h b/sound/oss/coproc.h deleted file mode 100644 index 7bec21bbdd88..000000000000 --- a/sound/oss/coproc.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Definitions for various on board processors on the sound cards. For - * example DSP processors. - */ - -/* - * Coprocessor access types - */ -#define COPR_CUSTOM 0x0001 /* Custom applications */ -#define COPR_MIDI 0x0002 /* MIDI (MPU-401) emulation */ -#define COPR_PCM 0x0004 /* Digitized voice applications */ -#define COPR_SYNTH 0x0008 /* Music synthesis */ diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c deleted file mode 100644 index 6dad51596b70..000000000000 --- a/sound/oss/dev_table.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * sound/oss/dev_table.c - * - * Device call tables. - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - -#include <linux/init.h> - -#include "sound_config.h" - -struct audio_operations *audio_devs[MAX_AUDIO_DEV]; -EXPORT_SYMBOL(audio_devs); - -int num_audiodevs; -EXPORT_SYMBOL(num_audiodevs); - -struct mixer_operations *mixer_devs[MAX_MIXER_DEV]; -EXPORT_SYMBOL(mixer_devs); - -int num_mixers; -EXPORT_SYMBOL(num_mixers); - -struct synth_operations *synth_devs[MAX_SYNTH_DEV+MAX_MIDI_DEV]; -EXPORT_SYMBOL(synth_devs); - -int num_synths; - -struct midi_operations *midi_devs[MAX_MIDI_DEV]; -EXPORT_SYMBOL(midi_devs); - -int num_midis; -EXPORT_SYMBOL(num_midis); - -struct sound_timer_operations *sound_timer_devs[MAX_TIMER_DEV] = { - &default_sound_timer, NULL -}; -EXPORT_SYMBOL(sound_timer_devs); - -int num_sound_timers = 1; - - -static int sound_alloc_audiodev(void); - -int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, - int driver_size, int flags, unsigned int format_mask, - void *devc, int dma1, int dma2) -{ - struct audio_driver *d; - struct audio_operations *op; - int num; - - if (vers != AUDIO_DRIVER_VERSION || driver_size > sizeof(struct audio_driver)) { - printk(KERN_ERR "Sound: Incompatible audio driver for %s\n", name); - return -EINVAL; - } - num = sound_alloc_audiodev(); - - if (num == -1) { - printk(KERN_ERR "sound: Too many audio drivers\n"); - return -EBUSY; - } - d = (struct audio_driver *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_driver))); - sound_nblocks++; - if (sound_nblocks >= MAX_MEM_BLOCKS) - sound_nblocks = MAX_MEM_BLOCKS - 1; - - op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations))); - sound_nblocks++; - if (sound_nblocks >= MAX_MEM_BLOCKS) - sound_nblocks = MAX_MEM_BLOCKS - 1; - - if (d == NULL || op == NULL) { - printk(KERN_ERR "Sound: Can't allocate driver for (%s)\n", name); - sound_unload_audiodev(num); - return -ENOMEM; - } - init_waitqueue_head(&op->in_sleeper); - init_waitqueue_head(&op->out_sleeper); - init_waitqueue_head(&op->poll_sleeper); - if (driver_size < sizeof(struct audio_driver)) - memset((char *) d, 0, sizeof(struct audio_driver)); - - memcpy((char *) d, (char *) driver, driver_size); - - op->d = d; - strlcpy(op->name, name, sizeof(op->name)); - op->flags = flags; - op->format_mask = format_mask; - op->devc = devc; - - /* - * Hardcoded defaults - */ - audio_devs[num] = op; - - DMAbuf_init(num, dma1, dma2); - - audio_init_devices(); - return num; -} -EXPORT_SYMBOL(sound_install_audiodrv); - -int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, - int driver_size, void *devc) -{ - struct mixer_operations *op; - - int n = sound_alloc_mixerdev(); - - if (n == -1) { - printk(KERN_ERR "Sound: Too many mixer drivers\n"); - return -EBUSY; - } - if (vers != MIXER_DRIVER_VERSION || - driver_size > sizeof(struct mixer_operations)) { - printk(KERN_ERR "Sound: Incompatible mixer driver for %s\n", name); - return -EINVAL; - } - - /* FIXME: This leaks a mixer_operations struct every time its called - until you unload sound! */ - - op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations))); - sound_nblocks++; - if (sound_nblocks >= MAX_MEM_BLOCKS) - sound_nblocks = MAX_MEM_BLOCKS - 1; - - if (op == NULL) { - printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name); - return -ENOMEM; - } - memcpy((char *) op, (char *) driver, driver_size); - - strlcpy(op->name, name, sizeof(op->name)); - op->devc = devc; - - mixer_devs[n] = op; - return n; -} -EXPORT_SYMBOL(sound_install_mixer); - -void sound_unload_audiodev(int dev) -{ - if (dev != -1) { - DMAbuf_deinit(dev); - audio_devs[dev] = NULL; - unregister_sound_dsp((dev<<4)+3); - } -} -EXPORT_SYMBOL(sound_unload_audiodev); - -static int sound_alloc_audiodev(void) -{ - int i = register_sound_dsp(&oss_sound_fops, -1); - if(i==-1) - return i; - i>>=4; - if(i>=num_audiodevs) - num_audiodevs = i + 1; - return i; -} - -int sound_alloc_mididev(void) -{ - int i = register_sound_midi(&oss_sound_fops, -1); - if(i==-1) - return i; - i>>=4; - if(i>=num_midis) - num_midis = i + 1; - return i; -} -EXPORT_SYMBOL(sound_alloc_mididev); - -int sound_alloc_synthdev(void) -{ - int i; - - for (i = 0; i < MAX_SYNTH_DEV; i++) { - if (synth_devs[i] == NULL) { - if (i >= num_synths) - num_synths++; - return i; - } - } - return -1; -} -EXPORT_SYMBOL(sound_alloc_synthdev); - -int sound_alloc_mixerdev(void) -{ - int i = register_sound_mixer(&oss_sound_fops, -1); - if(i==-1) - return -1; - i>>=4; - if(i>=num_mixers) - num_mixers = i + 1; - return i; -} -EXPORT_SYMBOL(sound_alloc_mixerdev); - -int sound_alloc_timerdev(void) -{ - int i; - - for (i = 0; i < MAX_TIMER_DEV; i++) { - if (sound_timer_devs[i] == NULL) { - if (i >= num_sound_timers) - num_sound_timers++; - return i; - } - } - return -1; -} -EXPORT_SYMBOL(sound_alloc_timerdev); - -void sound_unload_mixerdev(int dev) -{ - if (dev != -1) { - mixer_devs[dev] = NULL; - unregister_sound_mixer(dev<<4); - num_mixers--; - } -} -EXPORT_SYMBOL(sound_unload_mixerdev); - -void sound_unload_mididev(int dev) -{ - if (dev != -1) { - midi_devs[dev] = NULL; - unregister_sound_midi((dev<<4)+2); - } -} -EXPORT_SYMBOL(sound_unload_mididev); - -void sound_unload_synthdev(int dev) -{ - if (dev != -1) - synth_devs[dev] = NULL; -} -EXPORT_SYMBOL(sound_unload_synthdev); - -void sound_unload_timerdev(int dev) -{ - if (dev != -1) - sound_timer_devs[dev] = NULL; -} -EXPORT_SYMBOL(sound_unload_timerdev); - diff --git a/sound/oss/dev_table.h b/sound/oss/dev_table.h deleted file mode 100644 index 0199a317c5a9..000000000000 --- a/sound/oss/dev_table.h +++ /dev/null @@ -1,390 +0,0 @@ -/* - * dev_table.h - * - * Global definitions for device call tables - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - - -#ifndef _DEV_TABLE_H_ -#define _DEV_TABLE_H_ - -#include <linux/spinlock.h> -/* - * Sound card numbers 27 to 999. (1 to 26 are defined in soundcard.h) - * Numbers 1000 to N are reserved for driver's internal use. - */ - -#define SNDCARD_DESKPROXL 27 /* Compaq Deskpro XL */ -#define SNDCARD_VIDC 28 /* ARMs VIDC */ -#define SNDCARD_SBPNP 29 -#define SNDCARD_SOFTOSS 36 -#define SNDCARD_VMIDI 37 -#define SNDCARD_OPL3SA1 38 /* Note: clash in msnd.h */ -#define SNDCARD_OPL3SA1_SB 39 -#define SNDCARD_OPL3SA1_MPU 40 -#define SNDCARD_WAVEFRONT 41 -#define SNDCARD_OPL3SA2 42 -#define SNDCARD_OPL3SA2_MPU 43 -#define SNDCARD_WAVEARTIST 44 /* Waveartist */ -#define SNDCARD_OPL3SA2_MSS 45 /* Originally missed */ -#define SNDCARD_AD1816 88 - -/* - * NOTE! NOTE! NOTE! NOTE! - * - * If you modify this file, please check the dev_table.c also. - * - * NOTE! NOTE! NOTE! NOTE! - */ - -struct driver_info -{ - char *driver_id; - int card_subtype; /* Driver specific. Usually 0 */ - int card_type; /* From soundcard.h */ - char *name; - void (*attach) (struct address_info *hw_config); - int (*probe) (struct address_info *hw_config); - void (*unload) (struct address_info *hw_config); -}; - -struct card_info -{ - int card_type; /* Link (search key) to the driver list */ - struct address_info config; - int enabled; - void *for_driver_use; -}; - - -/* - * Device specific parameters (used only by dmabuf.c) - */ -#define MAX_SUB_BUFFERS (32*MAX_REALTIME_FACTOR) - -#define DMODE_NONE 0 -#define DMODE_OUTPUT PCM_ENABLE_OUTPUT -#define DMODE_INPUT PCM_ENABLE_INPUT - -struct dma_buffparms -{ - int dma_mode; /* DMODE_INPUT, DMODE_OUTPUT or DMODE_NONE */ - int closing; - - /* - * Pointers to raw buffers - */ - - char *raw_buf; - unsigned long raw_buf_phys; - int buffsize; - - /* - * Device state tables - */ - - unsigned long flags; -#define DMA_BUSY 0x00000001 -#define DMA_RESTART 0x00000002 -#define DMA_ACTIVE 0x00000004 -#define DMA_STARTED 0x00000008 -#define DMA_EMPTY 0x00000010 -#define DMA_ALLOC_DONE 0x00000020 -#define DMA_SYNCING 0x00000040 -#define DMA_DIRTY 0x00000080 -#define DMA_POST 0x00000100 -#define DMA_NODMA 0x00000200 -#define DMA_NOTIMEOUT 0x00000400 - - int open_mode; - - /* - * Queue parameters. - */ - int qlen; - int qhead; - int qtail; - spinlock_t lock; - - int cfrag; /* Current incomplete fragment (write) */ - - int nbufs; - int counts[MAX_SUB_BUFFERS]; - int subdivision; - - int fragment_size; - int needs_reorg; - int max_fragments; - - int bytes_in_use; - - int underrun_count; - unsigned long byte_counter; - unsigned long user_counter; - unsigned long max_byte_counter; - int data_rate; /* Bytes/second */ - - int mapping_flags; -#define DMA_MAP_MAPPED 0x00000001 - char neutral_byte; - int dma; /* DMA channel */ - - int applic_profile; /* Application profile (APF_*) */ - /* Interrupt callback stuff */ - void (*audio_callback) (int dev, int parm); - int callback_parm; - - int buf_flags[MAX_SUB_BUFFERS]; -#define BUFF_EOF 0x00000001 /* Increment eof count */ -#define BUFF_DIRTY 0x00000002 /* Buffer written */ -}; - -/* - * Structure for use with various microcontrollers and DSP processors - * in the recent sound cards. - */ -typedef struct coproc_operations -{ - char name[64]; - struct module *owner; - int (*open) (void *devc, int sub_device); - void (*close) (void *devc, int sub_device); - int (*ioctl) (void *devc, unsigned int cmd, void __user * arg, int local); - void (*reset) (void *devc); - - void *devc; /* Driver specific info */ -} coproc_operations; - -struct audio_driver -{ - struct module *owner; - int (*open) (int dev, int mode); - void (*close) (int dev); - void (*output_block) (int dev, unsigned long buf, - int count, int intrflag); - void (*start_input) (int dev, unsigned long buf, - int count, int intrflag); - int (*ioctl) (int dev, unsigned int cmd, void __user * arg); - int (*prepare_for_input) (int dev, int bufsize, int nbufs); - int (*prepare_for_output) (int dev, int bufsize, int nbufs); - void (*halt_io) (int dev); - int (*local_qlen)(int dev); - void (*copy_user) (int dev, - char *localbuf, int localoffs, - const char __user *userbuf, int useroffs, - int max_in, int max_out, - int *used, int *returned, - int len); - void (*halt_input) (int dev); - void (*halt_output) (int dev); - void (*trigger) (int dev, int bits); - int (*set_speed)(int dev, int speed); - unsigned int (*set_bits)(int dev, unsigned int bits); - short (*set_channels)(int dev, short channels); - void (*postprocess_write)(int dev); /* Device spesific postprocessing for written data */ - void (*preprocess_read)(int dev); /* Device spesific preprocessing for read data */ - void (*mmap)(int dev); -}; - -struct audio_operations -{ - char name[128]; - int flags; -#define NOTHING_SPECIAL 0x00 -#define NEEDS_RESTART 0x01 -#define DMA_AUTOMODE 0x02 -#define DMA_DUPLEX 0x04 -#define DMA_PSEUDO_AUTOMODE 0x08 -#define DMA_HARDSTOP 0x10 -#define DMA_EXACT 0x40 -#define DMA_NORESET 0x80 - int format_mask; /* Bitmask for supported audio formats */ - void *devc; /* Driver specific info */ - struct audio_driver *d; - void *portc; /* Driver specific info */ - struct dma_buffparms *dmap_in, *dmap_out; - struct coproc_operations *coproc; - int mixer_dev; - int enable_bits; - int open_mode; - int go; - int min_fragment; /* 0 == unlimited */ - int max_fragment; /* 0 == unlimited */ - int parent_dev; /* 0 -> no parent, 1 to n -> parent=parent_dev+1 */ - - /* fields formerly in dmabuf.c */ - wait_queue_head_t in_sleeper; - wait_queue_head_t out_sleeper; - wait_queue_head_t poll_sleeper; - - /* fields formerly in audio.c */ - int audio_mode; - -#define AM_NONE 0 -#define AM_WRITE OPEN_WRITE -#define AM_READ OPEN_READ - - int local_format; - int audio_format; - int local_conversion; -#define CNV_MU_LAW 0x00000001 - - /* large structures at the end to keep offsets small */ - struct dma_buffparms dmaps[2]; -}; - -int *load_mixer_volumes(char *name, int *levels, int present); - -struct mixer_operations -{ - struct module *owner; - char id[16]; - char name[64]; - int (*ioctl) (int dev, unsigned int cmd, void __user * arg); - - void *devc; - int modify_counter; -}; - -struct synth_operations -{ - struct module *owner; - char *id; /* Unique identifier (ASCII) max 29 char */ - struct synth_info *info; - int midi_dev; - int synth_type; - int synth_subtype; - - int (*open) (int dev, int mode); - void (*close) (int dev); - int (*ioctl) (int dev, unsigned int cmd, void __user * arg); - int (*kill_note) (int dev, int voice, int note, int velocity); - int (*start_note) (int dev, int voice, int note, int velocity); - int (*set_instr) (int dev, int voice, int instr); - void (*reset) (int dev); - void (*hw_control) (int dev, unsigned char *event); - int (*load_patch) (int dev, int format, const char __user *addr, - int count, int pmgr_flag); - void (*aftertouch) (int dev, int voice, int pressure); - void (*controller) (int dev, int voice, int ctrl_num, int value); - void (*panning) (int dev, int voice, int value); - void (*volume_method) (int dev, int mode); - void (*bender) (int dev, int chn, int value); - int (*alloc_voice) (int dev, int chn, int note, struct voice_alloc_info *alloc); - void (*setup_voice) (int dev, int voice, int chn); - int (*send_sysex)(int dev, unsigned char *bytes, int len); - - struct voice_alloc_info alloc; - struct channel_info chn_info[16]; - int emulation; -#define EMU_GM 1 /* General MIDI */ -#define EMU_XG 2 /* Yamaha XG */ -#define MAX_SYSEX_BUF 64 - unsigned char sysex_buf[MAX_SYSEX_BUF]; - int sysex_ptr; -}; - -struct midi_input_info -{ - /* MIDI input scanner variables */ -#define MI_MAX 10 - volatile int m_busy; - unsigned char m_buf[MI_MAX]; - unsigned char m_prev_status; /* For running status */ - int m_ptr; -#define MST_INIT 0 -#define MST_DATA 1 -#define MST_SYSEX 2 - int m_state; - int m_left; -}; - -struct midi_operations -{ - struct module *owner; - struct midi_info info; - struct synth_operations *converter; - struct midi_input_info in_info; - int (*open) (int dev, int mode, - void (*inputintr)(int dev, unsigned char data), - void (*outputintr)(int dev) - ); - void (*close) (int dev); - int (*ioctl) (int dev, unsigned int cmd, void __user * arg); - int (*outputc) (int dev, unsigned char data); - int (*start_read) (int dev); - int (*end_read) (int dev); - void (*kick)(int dev); - int (*command) (int dev, unsigned char *data); - int (*buffer_status) (int dev); - int (*prefix_cmd) (int dev, unsigned char status); - struct coproc_operations *coproc; - void *devc; -}; - -struct sound_lowlev_timer -{ - int dev; - int priority; - unsigned int (*tmr_start)(int dev, unsigned int usecs); - void (*tmr_disable)(int dev); - void (*tmr_restart)(int dev); -}; - -struct sound_timer_operations -{ - struct module *owner; - struct sound_timer_info info; - int priority; - int devlink; - int (*open)(int dev, int mode); - void (*close)(int dev); - int (*event)(int dev, unsigned char *ev); - unsigned long (*get_time)(int dev); - int (*ioctl) (int dev, unsigned int cmd, void __user * arg); - void (*arm_timer)(int dev, long time); -}; - -extern struct sound_timer_operations default_sound_timer; - -extern struct audio_operations *audio_devs[MAX_AUDIO_DEV]; -extern int num_audiodevs; -extern struct mixer_operations *mixer_devs[MAX_MIXER_DEV]; -extern int num_mixers; -extern struct synth_operations *synth_devs[MAX_SYNTH_DEV+MAX_MIDI_DEV]; -extern int num_synths; -extern struct midi_operations *midi_devs[MAX_MIDI_DEV]; -extern int num_midis; -extern struct sound_timer_operations * sound_timer_devs[MAX_TIMER_DEV]; -extern int num_sound_timers; - -extern int sound_map_buffer (int dev, struct dma_buffparms *dmap, buffmem_desc *info); -void sound_timer_init (struct sound_lowlev_timer *t, char *name); -void sound_dma_intr (int dev, struct dma_buffparms *dmap, int chan); - -#define AUDIO_DRIVER_VERSION 2 -#define MIXER_DRIVER_VERSION 2 -int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver, - int driver_size, int flags, unsigned int format_mask, - void *devc, int dma1, int dma2); -int sound_install_mixer(int vers, char *name, struct mixer_operations *driver, - int driver_size, void *devc); - -void sound_unload_audiodev(int dev); -void sound_unload_mixerdev(int dev); -void sound_unload_mididev(int dev); -void sound_unload_synthdev(int dev); -void sound_unload_timerdev(int dev); -int sound_alloc_mixerdev(void); -int sound_alloc_timerdev(void); -int sound_alloc_synthdev(void); -int sound_alloc_mididev(void); -#endif /* _DEV_TABLE_H_ */ - diff --git a/sound/oss/dmabuf.c b/sound/oss/dmabuf.c deleted file mode 100644 index c5dd396c66a2..000000000000 --- a/sound/oss/dmabuf.c +++ /dev/null @@ -1,1268 +0,0 @@ -/* - * sound/oss/dmabuf.c - * - * The DMA buffer manager for digitized voice applications - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * Thomas Sailer : moved several static variables into struct audio_operations - * (which is grossly misnamed btw.) because they have the same - * lifetime as the rest in there and dynamic allocation saves - * 12k or so - * Thomas Sailer : remove {in,out}_sleep_flag. It was used for the sleeper to - * determine if it was woken up by the expiring timeout or by - * an explicit wake_up. The return value from schedule_timeout - * can be used instead; if 0, the wakeup was due to the timeout. - * - * Rob Riggs Added persistent DMA buffers (1998/10/17) - */ - -#define BE_CONSERVATIVE -#define SAMPLE_ROUNDUP 0 - -#include <linux/mm.h> -#include <linux/gfp.h> -#include <linux/sched/signal.h> - -#include "sound_config.h" -#include "sleep.h" - -#define DMAP_FREE_ON_CLOSE 0 -#define DMAP_KEEP_ON_CLOSE 1 -extern int sound_dmap_flag; - -static void dma_reset_output(int dev); -static void dma_reset_input(int dev); -static int local_start_dma(struct audio_operations *adev, unsigned long physaddr, int count, int dma_mode); - - - -static int debugmem; /* switched off by default */ -static int dma_buffsize = DSP_BUFFSIZE; - -static long dmabuf_timeout(struct dma_buffparms *dmap) -{ - long tmout; - - tmout = (dmap->fragment_size * HZ) / dmap->data_rate; - tmout += HZ / 5; /* Some safety distance */ - if (tmout < (HZ / 2)) - tmout = HZ / 2; - if (tmout > 20 * HZ) - tmout = 20 * HZ; - return tmout; -} - -static int sound_alloc_dmap(struct dma_buffparms *dmap) -{ - char *start_addr, *end_addr; - int dma_pagesize; - int sz, size; - struct page *page; - - dmap->mapping_flags &= ~DMA_MAP_MAPPED; - - if (dmap->raw_buf != NULL) - return 0; /* Already done */ - if (dma_buffsize < 4096) - dma_buffsize = 4096; - dma_pagesize = (dmap->dma < 4) ? (64 * 1024) : (128 * 1024); - - /* - * Now check for the Cyrix problem. - */ - - if(isa_dma_bridge_buggy==2) - dma_pagesize=32768; - - dmap->raw_buf = NULL; - dmap->buffsize = dma_buffsize; - if (dmap->buffsize > dma_pagesize) - dmap->buffsize = dma_pagesize; - start_addr = NULL; - /* - * Now loop until we get a free buffer. Try to get smaller buffer if - * it fails. Don't accept smaller than 8k buffer for performance - * reasons. - */ - while (start_addr == NULL && dmap->buffsize > PAGE_SIZE) { - for (sz = 0, size = PAGE_SIZE; size < dmap->buffsize; sz++, size <<= 1); - dmap->buffsize = PAGE_SIZE * (1 << sz); - start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA|__GFP_NOWARN, sz); - if (start_addr == NULL) - dmap->buffsize /= 2; - } - - if (start_addr == NULL) { - printk(KERN_WARNING "Sound error: Couldn't allocate DMA buffer\n"); - return -ENOMEM; - } else { - /* make some checks */ - end_addr = start_addr + dmap->buffsize - 1; - - if (debugmem) - printk(KERN_DEBUG "sound: start 0x%lx, end 0x%lx\n", (long) start_addr, (long) end_addr); - - /* now check if it fits into the same dma-pagesize */ - - if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1)) - || end_addr >= (char *) (MAX_DMA_ADDRESS)) { - printk(KERN_ERR "sound: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, dmap->buffsize); - return -EFAULT; - } - } - dmap->raw_buf = start_addr; - dmap->raw_buf_phys = dma_map_single(NULL, start_addr, dmap->buffsize, DMA_BIDIRECTIONAL); - - for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) - SetPageReserved(page); - return 0; -} - -static void sound_free_dmap(struct dma_buffparms *dmap) -{ - int sz, size; - struct page *page; - unsigned long start_addr, end_addr; - - if (dmap->raw_buf == NULL) - return; - if (dmap->mapping_flags & DMA_MAP_MAPPED) - return; /* Don't free mmapped buffer. Will use it next time */ - for (sz = 0, size = PAGE_SIZE; size < dmap->buffsize; sz++, size <<= 1); - - start_addr = (unsigned long) dmap->raw_buf; - end_addr = start_addr + dmap->buffsize; - - for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) - ClearPageReserved(page); - - dma_unmap_single(NULL, dmap->raw_buf_phys, dmap->buffsize, DMA_BIDIRECTIONAL); - free_pages((unsigned long) dmap->raw_buf, sz); - dmap->raw_buf = NULL; -} - - -/* Intel version !!!!!!!!! */ - -static int sound_start_dma(struct dma_buffparms *dmap, unsigned long physaddr, int count, int dma_mode) -{ - unsigned long flags; - int chan = dmap->dma; - - /* printk( "Start DMA%d %d, %d\n", chan, (int)(physaddr-dmap->raw_buf_phys), count); */ - - flags = claim_dma_lock(); - disable_dma(chan); - clear_dma_ff(chan); - set_dma_mode(chan, dma_mode); - set_dma_addr(chan, physaddr); - set_dma_count(chan, count); - enable_dma(chan); - release_dma_lock(flags); - - return 0; -} - -static void dma_init_buffers(struct dma_buffparms *dmap) -{ - dmap->qlen = dmap->qhead = dmap->qtail = dmap->user_counter = 0; - dmap->byte_counter = 0; - dmap->max_byte_counter = 8000 * 60 * 60; - dmap->bytes_in_use = dmap->buffsize; - - dmap->dma_mode = DMODE_NONE; - dmap->mapping_flags = 0; - dmap->neutral_byte = 0x80; - dmap->data_rate = 8000; - dmap->cfrag = -1; - dmap->closing = 0; - dmap->nbufs = 1; - dmap->flags = DMA_BUSY; /* Other flags off */ -} - -static int open_dmap(struct audio_operations *adev, int mode, struct dma_buffparms *dmap) -{ - int err; - - if (dmap->flags & DMA_BUSY) - return -EBUSY; - if ((err = sound_alloc_dmap(dmap)) < 0) - return err; - - if (dmap->raw_buf == NULL) { - printk(KERN_WARNING "Sound: DMA buffers not available\n"); - return -ENOSPC; /* Memory allocation failed during boot */ - } - if (dmap->dma >= 0 && sound_open_dma(dmap->dma, adev->name)) { - printk(KERN_WARNING "Unable to grab(2) DMA%d for the audio driver\n", dmap->dma); - return -EBUSY; - } - dma_init_buffers(dmap); - spin_lock_init(&dmap->lock); - dmap->open_mode = mode; - dmap->subdivision = dmap->underrun_count = 0; - dmap->fragment_size = 0; - dmap->max_fragments = 65536; /* Just a large value */ - dmap->byte_counter = 0; - dmap->max_byte_counter = 8000 * 60 * 60; - dmap->applic_profile = APF_NORMAL; - dmap->needs_reorg = 1; - dmap->audio_callback = NULL; - dmap->callback_parm = 0; - return 0; -} - -static void close_dmap(struct audio_operations *adev, struct dma_buffparms *dmap) -{ - unsigned long flags; - - if (dmap->dma >= 0) { - sound_close_dma(dmap->dma); - flags=claim_dma_lock(); - disable_dma(dmap->dma); - release_dma_lock(flags); - } - if (dmap->flags & DMA_BUSY) - dmap->dma_mode = DMODE_NONE; - dmap->flags &= ~DMA_BUSY; - - if (sound_dmap_flag == DMAP_FREE_ON_CLOSE) - sound_free_dmap(dmap); -} - - -static unsigned int default_set_bits(int dev, unsigned int bits) -{ - mm_segment_t fs = get_fs(); - - set_fs(get_ds()); - audio_devs[dev]->d->ioctl(dev, SNDCTL_DSP_SETFMT, (void __user *)&bits); - set_fs(fs); - return bits; -} - -static int default_set_speed(int dev, int speed) -{ - mm_segment_t fs = get_fs(); - - set_fs(get_ds()); - audio_devs[dev]->d->ioctl(dev, SNDCTL_DSP_SPEED, (void __user *)&speed); - set_fs(fs); - return speed; -} - -static short default_set_channels(int dev, short channels) -{ - int c = channels; - mm_segment_t fs = get_fs(); - - set_fs(get_ds()); - audio_devs[dev]->d->ioctl(dev, SNDCTL_DSP_CHANNELS, (void __user *)&c); - set_fs(fs); - return c; -} - -static void check_driver(struct audio_driver *d) -{ - if (d->set_speed == NULL) - d->set_speed = default_set_speed; - if (d->set_bits == NULL) - d->set_bits = default_set_bits; - if (d->set_channels == NULL) - d->set_channels = default_set_channels; -} - -int DMAbuf_open(int dev, int mode) -{ - struct audio_operations *adev = audio_devs[dev]; - int retval; - struct dma_buffparms *dmap_in = NULL; - struct dma_buffparms *dmap_out = NULL; - - if (!adev) - return -ENXIO; - if (!(adev->flags & DMA_DUPLEX)) - adev->dmap_in = adev->dmap_out; - check_driver(adev->d); - - if ((retval = adev->d->open(dev, mode)) < 0) - return retval; - dmap_out = adev->dmap_out; - dmap_in = adev->dmap_in; - if (dmap_in == dmap_out) - adev->flags &= ~DMA_DUPLEX; - - if (mode & OPEN_WRITE) { - if ((retval = open_dmap(adev, mode, dmap_out)) < 0) { - adev->d->close(dev); - return retval; - } - } - adev->enable_bits = mode; - - if (mode == OPEN_READ || (mode != OPEN_WRITE && (adev->flags & DMA_DUPLEX))) { - if ((retval = open_dmap(adev, mode, dmap_in)) < 0) { - adev->d->close(dev); - if (mode & OPEN_WRITE) - close_dmap(adev, dmap_out); - return retval; - } - } - adev->open_mode = mode; - adev->go = 1; - - adev->d->set_bits(dev, 8); - adev->d->set_channels(dev, 1); - adev->d->set_speed(dev, DSP_DEFAULT_SPEED); - if (adev->dmap_out->dma_mode == DMODE_OUTPUT) - memset(adev->dmap_out->raw_buf, adev->dmap_out->neutral_byte, - adev->dmap_out->bytes_in_use); - return 0; -} -/* MUST not hold the spinlock */ -void DMAbuf_reset(int dev) -{ - if (audio_devs[dev]->open_mode & OPEN_WRITE) - dma_reset_output(dev); - - if (audio_devs[dev]->open_mode & OPEN_READ) - dma_reset_input(dev); -} - -static void dma_reset_output(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - unsigned long flags,f ; - struct dma_buffparms *dmap = adev->dmap_out; - - if (!(dmap->flags & DMA_STARTED)) /* DMA is not active */ - return; - - /* - * First wait until the current fragment has been played completely - */ - spin_lock_irqsave(&dmap->lock,flags); - adev->dmap_out->flags |= DMA_SYNCING; - - adev->dmap_out->underrun_count = 0; - if (!signal_pending(current) && adev->dmap_out->qlen && - adev->dmap_out->underrun_count == 0){ - spin_unlock_irqrestore(&dmap->lock,flags); - oss_broken_sleep_on(&adev->out_sleeper, dmabuf_timeout(dmap)); - spin_lock_irqsave(&dmap->lock,flags); - } - adev->dmap_out->flags &= ~(DMA_SYNCING | DMA_ACTIVE); - - /* - * Finally shut the device off - */ - if (!(adev->flags & DMA_DUPLEX) || !adev->d->halt_output) - adev->d->halt_io(dev); - else - adev->d->halt_output(dev); - adev->dmap_out->flags &= ~DMA_STARTED; - - f=claim_dma_lock(); - clear_dma_ff(dmap->dma); - disable_dma(dmap->dma); - release_dma_lock(f); - - dmap->byte_counter = 0; - reorganize_buffers(dev, adev->dmap_out, 0); - dmap->qlen = dmap->qhead = dmap->qtail = dmap->user_counter = 0; - spin_unlock_irqrestore(&dmap->lock,flags); -} - -static void dma_reset_input(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - unsigned long flags; - struct dma_buffparms *dmap = adev->dmap_in; - - spin_lock_irqsave(&dmap->lock,flags); - if (!(adev->flags & DMA_DUPLEX) || !adev->d->halt_input) - adev->d->halt_io(dev); - else - adev->d->halt_input(dev); - adev->dmap_in->flags &= ~DMA_STARTED; - - dmap->qlen = dmap->qhead = dmap->qtail = dmap->user_counter = 0; - dmap->byte_counter = 0; - reorganize_buffers(dev, adev->dmap_in, 1); - spin_unlock_irqrestore(&dmap->lock,flags); -} -/* MUST be called with holding the dmap->lock */ -void DMAbuf_launch_output(int dev, struct dma_buffparms *dmap) -{ - struct audio_operations *adev = audio_devs[dev]; - - if (!((adev->enable_bits * adev->go) & PCM_ENABLE_OUTPUT)) - return; /* Don't start DMA yet */ - dmap->dma_mode = DMODE_OUTPUT; - - if (!(dmap->flags & DMA_ACTIVE) || !(adev->flags & DMA_AUTOMODE) || (dmap->flags & DMA_NODMA)) { - if (!(dmap->flags & DMA_STARTED)) { - reorganize_buffers(dev, dmap, 0); - if (adev->d->prepare_for_output(dev, dmap->fragment_size, dmap->nbufs)) - return; - if (!(dmap->flags & DMA_NODMA)) - local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use,DMA_MODE_WRITE); - dmap->flags |= DMA_STARTED; - } - if (dmap->counts[dmap->qhead] == 0) - dmap->counts[dmap->qhead] = dmap->fragment_size; - dmap->dma_mode = DMODE_OUTPUT; - adev->d->output_block(dev, dmap->raw_buf_phys + dmap->qhead * dmap->fragment_size, - dmap->counts[dmap->qhead], 1); - if (adev->d->trigger) - adev->d->trigger(dev,adev->enable_bits * adev->go); - } - dmap->flags |= DMA_ACTIVE; -} - -int DMAbuf_sync(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - unsigned long flags; - int n = 0; - struct dma_buffparms *dmap; - - if (!adev->go && !(adev->enable_bits & PCM_ENABLE_OUTPUT)) - return 0; - - if (adev->dmap_out->dma_mode == DMODE_OUTPUT) { - dmap = adev->dmap_out; - spin_lock_irqsave(&dmap->lock,flags); - if (dmap->qlen > 0 && !(dmap->flags & DMA_ACTIVE)) - DMAbuf_launch_output(dev, dmap); - adev->dmap_out->flags |= DMA_SYNCING; - adev->dmap_out->underrun_count = 0; - while (!signal_pending(current) && n++ < adev->dmap_out->nbufs && - adev->dmap_out->qlen && adev->dmap_out->underrun_count == 0) { - long t = dmabuf_timeout(dmap); - spin_unlock_irqrestore(&dmap->lock,flags); - /* FIXME: not safe may miss events */ - t = oss_broken_sleep_on(&adev->out_sleeper, t); - spin_lock_irqsave(&dmap->lock,flags); - if (!t) { - adev->dmap_out->flags &= ~DMA_SYNCING; - spin_unlock_irqrestore(&dmap->lock,flags); - return adev->dmap_out->qlen; - } - } - adev->dmap_out->flags &= ~(DMA_SYNCING | DMA_ACTIVE); - - /* - * Some devices such as GUS have huge amount of on board RAM for the - * audio data. We have to wait until the device has finished playing. - */ - - /* still holding the lock */ - if (adev->d->local_qlen) { /* Device has hidden buffers */ - while (!signal_pending(current) && - adev->d->local_qlen(dev)){ - spin_unlock_irqrestore(&dmap->lock,flags); - oss_broken_sleep_on(&adev->out_sleeper, - dmabuf_timeout(dmap)); - spin_lock_irqsave(&dmap->lock,flags); - } - } - spin_unlock_irqrestore(&dmap->lock,flags); - } - adev->dmap_out->dma_mode = DMODE_NONE; - return adev->dmap_out->qlen; -} - -int DMAbuf_release(int dev, int mode) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap; - unsigned long flags; - - dmap = adev->dmap_out; - if (adev->open_mode & OPEN_WRITE) - adev->dmap_out->closing = 1; - - if (adev->open_mode & OPEN_READ){ - adev->dmap_in->closing = 1; - dmap = adev->dmap_in; - } - if (adev->open_mode & OPEN_WRITE) - if (!(adev->dmap_out->mapping_flags & DMA_MAP_MAPPED)) - if (!signal_pending(current) && (adev->dmap_out->dma_mode == DMODE_OUTPUT)) - DMAbuf_sync(dev); - if (adev->dmap_out->dma_mode == DMODE_OUTPUT) - memset(adev->dmap_out->raw_buf, adev->dmap_out->neutral_byte, adev->dmap_out->bytes_in_use); - - DMAbuf_reset(dev); - spin_lock_irqsave(&dmap->lock,flags); - adev->d->close(dev); - - if (adev->open_mode & OPEN_WRITE) - close_dmap(adev, adev->dmap_out); - - if (adev->open_mode == OPEN_READ || - (adev->open_mode != OPEN_WRITE && - (adev->flags & DMA_DUPLEX))) - close_dmap(adev, adev->dmap_in); - adev->open_mode = 0; - spin_unlock_irqrestore(&dmap->lock,flags); - return 0; -} -/* called with dmap->lock dold */ -int DMAbuf_activate_recording(int dev, struct dma_buffparms *dmap) -{ - struct audio_operations *adev = audio_devs[dev]; - int err; - - if (!(adev->open_mode & OPEN_READ)) - return 0; - if (!(adev->enable_bits & PCM_ENABLE_INPUT)) - return 0; - if (dmap->dma_mode == DMODE_OUTPUT) { /* Direction change */ - /* release lock - it's not recursive */ - spin_unlock_irq(&dmap->lock); - DMAbuf_sync(dev); - DMAbuf_reset(dev); - spin_lock_irq(&dmap->lock); - dmap->dma_mode = DMODE_NONE; - } - if (!dmap->dma_mode) { - reorganize_buffers(dev, dmap, 1); - if ((err = adev->d->prepare_for_input(dev, - dmap->fragment_size, dmap->nbufs)) < 0) - return err; - dmap->dma_mode = DMODE_INPUT; - } - if (!(dmap->flags & DMA_ACTIVE)) { - if (dmap->needs_reorg) - reorganize_buffers(dev, dmap, 0); - local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use, DMA_MODE_READ); - adev->d->start_input(dev, dmap->raw_buf_phys + dmap->qtail * dmap->fragment_size, - dmap->fragment_size, 0); - dmap->flags |= DMA_ACTIVE; - if (adev->d->trigger) - adev->d->trigger(dev, adev->enable_bits * adev->go); - } - return 0; -} -/* acquires lock */ -int DMAbuf_getrdbuffer(int dev, char **buf, int *len, int dontblock) -{ - struct audio_operations *adev = audio_devs[dev]; - unsigned long flags; - int err = 0, n = 0; - struct dma_buffparms *dmap = adev->dmap_in; - - if (!(adev->open_mode & OPEN_READ)) - return -EIO; - spin_lock_irqsave(&dmap->lock,flags); - if (dmap->needs_reorg) - reorganize_buffers(dev, dmap, 0); - if (adev->dmap_in->mapping_flags & DMA_MAP_MAPPED) { -/* printk(KERN_WARNING "Sound: Can't read from mmapped device (1)\n");*/ - spin_unlock_irqrestore(&dmap->lock,flags); - return -EINVAL; - } else while (dmap->qlen <= 0 && n++ < 10) { - long timeout = MAX_SCHEDULE_TIMEOUT; - if (!(adev->enable_bits & PCM_ENABLE_INPUT) || !adev->go) { - spin_unlock_irqrestore(&dmap->lock,flags); - return -EAGAIN; - } - if ((err = DMAbuf_activate_recording(dev, dmap)) < 0) { - spin_unlock_irqrestore(&dmap->lock,flags); - return err; - } - /* Wait for the next block */ - - if (dontblock) { - spin_unlock_irqrestore(&dmap->lock,flags); - return -EAGAIN; - } - if (adev->go) - timeout = dmabuf_timeout(dmap); - - spin_unlock_irqrestore(&dmap->lock,flags); - timeout = oss_broken_sleep_on(&adev->in_sleeper, timeout); - if (!timeout) { - /* FIXME: include device name */ - err = -EIO; - printk(KERN_WARNING "Sound: DMA (input) timed out - IRQ/DRQ config error?\n"); - dma_reset_input(dev); - } else - err = -EINTR; - spin_lock_irqsave(&dmap->lock,flags); - } - spin_unlock_irqrestore(&dmap->lock,flags); - - if (dmap->qlen <= 0) - return err ? err : -EINTR; - *buf = &dmap->raw_buf[dmap->qhead * dmap->fragment_size + dmap->counts[dmap->qhead]]; - *len = dmap->fragment_size - dmap->counts[dmap->qhead]; - - return dmap->qhead; -} - -int DMAbuf_rmchars(int dev, int buff_no, int c) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_in; - int p = dmap->counts[dmap->qhead] + c; - - if (dmap->mapping_flags & DMA_MAP_MAPPED) - { -/* printk("Sound: Can't read from mmapped device (2)\n");*/ - return -EINVAL; - } - else if (dmap->qlen <= 0) - return -EIO; - else if (p >= dmap->fragment_size) { /* This buffer is completely empty */ - dmap->counts[dmap->qhead] = 0; - dmap->qlen--; - dmap->qhead = (dmap->qhead + 1) % dmap->nbufs; - } - else dmap->counts[dmap->qhead] = p; - - return 0; -} -/* MUST be called with dmap->lock hold */ -int DMAbuf_get_buffer_pointer(int dev, struct dma_buffparms *dmap, int direction) -{ - /* - * Try to approximate the active byte position of the DMA pointer within the - * buffer area as well as possible. - */ - - int pos; - unsigned long f; - - if (!(dmap->flags & DMA_ACTIVE)) - pos = 0; - else { - int chan = dmap->dma; - - f=claim_dma_lock(); - clear_dma_ff(chan); - - if(!isa_dma_bridge_buggy) - disable_dma(dmap->dma); - - pos = get_dma_residue(chan); - - pos = dmap->bytes_in_use - pos; - - if (!(dmap->mapping_flags & DMA_MAP_MAPPED)) { - if (direction == DMODE_OUTPUT) { - if (dmap->qhead == 0) - if (pos > dmap->fragment_size) - pos = 0; - } else { - if (dmap->qtail == 0) - if (pos > dmap->fragment_size) - pos = 0; - } - } - if (pos < 0) - pos = 0; - if (pos >= dmap->bytes_in_use) - pos = 0; - - if(!isa_dma_bridge_buggy) - enable_dma(dmap->dma); - - release_dma_lock(f); - } - /* printk( "%04x ", pos); */ - - return pos; -} - -/* - * DMAbuf_start_devices() is called by the /dev/music driver to start - * one or more audio devices at desired moment. - */ - -void DMAbuf_start_devices(unsigned int devmask) -{ - struct audio_operations *adev; - int dev; - - for (dev = 0; dev < num_audiodevs; dev++) { - if (!(devmask & (1 << dev))) - continue; - if (!(adev = audio_devs[dev])) - continue; - if (adev->open_mode == 0) - continue; - if (adev->go) - continue; - /* OK to start the device */ - adev->go = 1; - if (adev->d->trigger) - adev->d->trigger(dev,adev->enable_bits * adev->go); - } -} -/* via poll called without a lock ?*/ -int DMAbuf_space_in_queue(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - int len, max, tmp; - struct dma_buffparms *dmap = adev->dmap_out; - int lim = dmap->nbufs; - - if (lim < 2) - lim = 2; - - if (dmap->qlen >= lim) /* No space at all */ - return 0; - - /* - * Verify that there are no more pending buffers than the limit - * defined by the process. - */ - - max = dmap->max_fragments; - if (max > lim) - max = lim; - len = dmap->qlen; - - if (adev->d->local_qlen) { - tmp = adev->d->local_qlen(dev); - if (tmp && len) - tmp--; /* This buffer has been counted twice */ - len += tmp; - } - if (dmap->byte_counter % dmap->fragment_size) /* There is a partial fragment */ - len = len + 1; - - if (len >= max) - return 0; - return max - len; -} -/* MUST not hold the spinlock - this function may sleep */ -static int output_sleep(int dev, int dontblock) -{ - struct audio_operations *adev = audio_devs[dev]; - int err = 0; - struct dma_buffparms *dmap = adev->dmap_out; - long timeout; - long timeout_value; - - if (dontblock) - return -EAGAIN; - if (!(adev->enable_bits & PCM_ENABLE_OUTPUT)) - return -EAGAIN; - - /* - * Wait for free space - */ - if (signal_pending(current)) - return -EINTR; - timeout = (adev->go && !(dmap->flags & DMA_NOTIMEOUT)); - if (timeout) - timeout_value = dmabuf_timeout(dmap); - else - timeout_value = MAX_SCHEDULE_TIMEOUT; - timeout_value = oss_broken_sleep_on(&adev->out_sleeper, timeout_value); - if (timeout != MAX_SCHEDULE_TIMEOUT && !timeout_value) { - printk(KERN_WARNING "Sound: DMA (output) timed out - IRQ/DRQ config error?\n"); - dma_reset_output(dev); - } else { - if (signal_pending(current)) - err = -EINTR; - } - return err; -} -/* called with the lock held */ -static int find_output_space(int dev, char **buf, int *size) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_out; - unsigned long active_offs; - long len, offs; - int maxfrags; - int occupied_bytes = (dmap->user_counter % dmap->fragment_size); - - *buf = dmap->raw_buf; - if (!(maxfrags = DMAbuf_space_in_queue(dev)) && !occupied_bytes) - return 0; - -#ifdef BE_CONSERVATIVE - active_offs = dmap->byte_counter + dmap->qhead * dmap->fragment_size; -#else - active_offs = max(DMAbuf_get_buffer_pointer(dev, dmap, DMODE_OUTPUT), 0); - /* Check for pointer wrapping situation */ - if (active_offs >= dmap->bytes_in_use) - active_offs = 0; - active_offs += dmap->byte_counter; -#endif - - offs = (dmap->user_counter % dmap->bytes_in_use) & ~SAMPLE_ROUNDUP; - if (offs < 0 || offs >= dmap->bytes_in_use) { - printk(KERN_ERR "Sound: Got unexpected offs %ld. Giving up.\n", offs); - printk("Counter = %ld, bytes=%d\n", dmap->user_counter, dmap->bytes_in_use); - return 0; - } - *buf = dmap->raw_buf + offs; - - len = active_offs + dmap->bytes_in_use - dmap->user_counter; /* Number of unused bytes in buffer */ - - if ((offs + len) > dmap->bytes_in_use) - len = dmap->bytes_in_use - offs; - if (len < 0) { - return 0; - } - if (len > ((maxfrags * dmap->fragment_size) - occupied_bytes)) - len = (maxfrags * dmap->fragment_size) - occupied_bytes; - *size = len & ~SAMPLE_ROUNDUP; - return (*size > 0); -} -/* acquires lock */ -int DMAbuf_getwrbuffer(int dev, char **buf, int *size, int dontblock) -{ - struct audio_operations *adev = audio_devs[dev]; - unsigned long flags; - int err = -EIO; - struct dma_buffparms *dmap = adev->dmap_out; - - if (dmap->mapping_flags & DMA_MAP_MAPPED) { -/* printk(KERN_DEBUG "Sound: Can't write to mmapped device (3)\n");*/ - return -EINVAL; - } - spin_lock_irqsave(&dmap->lock,flags); - if (dmap->needs_reorg) - reorganize_buffers(dev, dmap, 0); - - if (dmap->dma_mode == DMODE_INPUT) { /* Direction change */ - spin_unlock_irqrestore(&dmap->lock,flags); - DMAbuf_reset(dev); - spin_lock_irqsave(&dmap->lock,flags); - } - dmap->dma_mode = DMODE_OUTPUT; - - while (find_output_space(dev, buf, size) <= 0) { - spin_unlock_irqrestore(&dmap->lock,flags); - if ((err = output_sleep(dev, dontblock)) < 0) { - return err; - } - spin_lock_irqsave(&dmap->lock,flags); - } - - spin_unlock_irqrestore(&dmap->lock,flags); - return 0; -} -/* has to acquire dmap->lock */ -int DMAbuf_move_wrpointer(int dev, int l) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_out; - unsigned long ptr; - unsigned long end_ptr, p; - int post; - unsigned long flags; - - spin_lock_irqsave(&dmap->lock,flags); - post= (dmap->flags & DMA_POST); - ptr = (dmap->user_counter / dmap->fragment_size) * dmap->fragment_size; - - dmap->flags &= ~DMA_POST; - dmap->cfrag = -1; - dmap->user_counter += l; - dmap->flags |= DMA_DIRTY; - - if (dmap->byte_counter >= dmap->max_byte_counter) { - /* Wrap the byte counters */ - long decr = dmap->byte_counter; - dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use); - decr -= dmap->byte_counter; - dmap->user_counter -= decr; - } - end_ptr = (dmap->user_counter / dmap->fragment_size) * dmap->fragment_size; - - p = (dmap->user_counter - 1) % dmap->bytes_in_use; - dmap->neutral_byte = dmap->raw_buf[p]; - - /* Update the fragment based bookkeeping too */ - while (ptr < end_ptr) { - dmap->counts[dmap->qtail] = dmap->fragment_size; - dmap->qtail = (dmap->qtail + 1) % dmap->nbufs; - dmap->qlen++; - ptr += dmap->fragment_size; - } - - dmap->counts[dmap->qtail] = dmap->user_counter - ptr; - - /* - * Let the low level driver perform some postprocessing to - * the written data. - */ - if (adev->d->postprocess_write) - adev->d->postprocess_write(dev); - - if (!(dmap->flags & DMA_ACTIVE)) - if (dmap->qlen > 1 || (dmap->qlen > 0 && (post || dmap->qlen >= dmap->nbufs - 1))) - DMAbuf_launch_output(dev, dmap); - - spin_unlock_irqrestore(&dmap->lock,flags); - return 0; -} - -int DMAbuf_start_dma(int dev, unsigned long physaddr, int count, int dma_mode) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = (dma_mode == DMA_MODE_WRITE) ? adev->dmap_out : adev->dmap_in; - - if (dmap->raw_buf == NULL) { - printk(KERN_ERR "sound: DMA buffer(1) == NULL\n"); - printk("Device %d, chn=%s\n", dev, (dmap == adev->dmap_out) ? "out" : "in"); - return 0; - } - if (dmap->dma < 0) - return 0; - sound_start_dma(dmap, physaddr, count, dma_mode); - return count; -} -EXPORT_SYMBOL(DMAbuf_start_dma); - -static int local_start_dma(struct audio_operations *adev, unsigned long physaddr, int count, int dma_mode) -{ - struct dma_buffparms *dmap = (dma_mode == DMA_MODE_WRITE) ? adev->dmap_out : adev->dmap_in; - - if (dmap->raw_buf == NULL) { - printk(KERN_ERR "sound: DMA buffer(2) == NULL\n"); - printk(KERN_ERR "Device %s, chn=%s\n", adev->name, (dmap == adev->dmap_out) ? "out" : "in"); - return 0; - } - if (dmap->flags & DMA_NODMA) - return 1; - if (dmap->dma < 0) - return 0; - sound_start_dma(dmap, dmap->raw_buf_phys, dmap->bytes_in_use, dma_mode | DMA_AUTOINIT); - dmap->flags |= DMA_STARTED; - return count; -} - -static void finish_output_interrupt(int dev, struct dma_buffparms *dmap) -{ - struct audio_operations *adev = audio_devs[dev]; - - if (dmap->audio_callback != NULL) - dmap->audio_callback(dev, dmap->callback_parm); - wake_up(&adev->out_sleeper); - wake_up(&adev->poll_sleeper); -} -/* called with dmap->lock held in irq context*/ -static void do_outputintr(int dev, int dummy) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_out; - int this_fragment; - - if (dmap->raw_buf == NULL) { - printk(KERN_ERR "Sound: Error. Audio interrupt (%d) after freeing buffers.\n", dev); - return; - } - if (dmap->mapping_flags & DMA_MAP_MAPPED) { /* Virtual memory mapped access */ - /* mmapped access */ - dmap->qhead = (dmap->qhead + 1) % dmap->nbufs; - if (dmap->qhead == 0) { /* Wrapped */ - dmap->byte_counter += dmap->bytes_in_use; - if (dmap->byte_counter >= dmap->max_byte_counter) { /* Overflow */ - long decr = dmap->byte_counter; - dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use); - decr -= dmap->byte_counter; - dmap->user_counter -= decr; - } - } - dmap->qlen++; /* Yes increment it (don't decrement) */ - if (!(adev->flags & DMA_AUTOMODE)) - dmap->flags &= ~DMA_ACTIVE; - dmap->counts[dmap->qhead] = dmap->fragment_size; - DMAbuf_launch_output(dev, dmap); - finish_output_interrupt(dev, dmap); - return; - } - - dmap->qlen--; - this_fragment = dmap->qhead; - dmap->qhead = (dmap->qhead + 1) % dmap->nbufs; - - if (dmap->qhead == 0) { /* Wrapped */ - dmap->byte_counter += dmap->bytes_in_use; - if (dmap->byte_counter >= dmap->max_byte_counter) { /* Overflow */ - long decr = dmap->byte_counter; - dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use); - decr -= dmap->byte_counter; - dmap->user_counter -= decr; - } - } - if (!(adev->flags & DMA_AUTOMODE)) - dmap->flags &= ~DMA_ACTIVE; - - /* - * This is dmap->qlen <= 0 except when closing when - * dmap->qlen < 0 - */ - - while (dmap->qlen <= -dmap->closing) { - dmap->underrun_count++; - dmap->qlen++; - if ((dmap->flags & DMA_DIRTY) && dmap->applic_profile != APF_CPUINTENS) { - dmap->flags &= ~DMA_DIRTY; - memset(adev->dmap_out->raw_buf, adev->dmap_out->neutral_byte, - adev->dmap_out->buffsize); - } - dmap->user_counter += dmap->fragment_size; - dmap->qtail = (dmap->qtail + 1) % dmap->nbufs; - } - if (dmap->qlen > 0) - DMAbuf_launch_output(dev, dmap); - finish_output_interrupt(dev, dmap); -} -/* called in irq context */ -void DMAbuf_outputintr(int dev, int notify_only) -{ - struct audio_operations *adev = audio_devs[dev]; - unsigned long flags; - struct dma_buffparms *dmap = adev->dmap_out; - - spin_lock_irqsave(&dmap->lock,flags); - if (!(dmap->flags & DMA_NODMA)) { - int chan = dmap->dma, pos, n; - unsigned long f; - - f=claim_dma_lock(); - - if(!isa_dma_bridge_buggy) - disable_dma(dmap->dma); - clear_dma_ff(chan); - pos = dmap->bytes_in_use - get_dma_residue(chan); - if(!isa_dma_bridge_buggy) - enable_dma(dmap->dma); - release_dma_lock(f); - - pos = pos / dmap->fragment_size; /* Actual qhead */ - if (pos < 0 || pos >= dmap->nbufs) - pos = 0; - n = 0; - while (dmap->qhead != pos && n++ < dmap->nbufs) - do_outputintr(dev, notify_only); - } - else - do_outputintr(dev, notify_only); - spin_unlock_irqrestore(&dmap->lock,flags); -} -EXPORT_SYMBOL(DMAbuf_outputintr); - -/* called with dmap->lock held in irq context */ -static void do_inputintr(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_in; - - if (dmap->raw_buf == NULL) { - printk(KERN_ERR "Sound: Fatal error. Audio interrupt after freeing buffers.\n"); - return; - } - if (dmap->mapping_flags & DMA_MAP_MAPPED) { - dmap->qtail = (dmap->qtail + 1) % dmap->nbufs; - if (dmap->qtail == 0) { /* Wrapped */ - dmap->byte_counter += dmap->bytes_in_use; - if (dmap->byte_counter >= dmap->max_byte_counter) { /* Overflow */ - long decr = dmap->byte_counter; - dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use) + dmap->bytes_in_use; - decr -= dmap->byte_counter; - dmap->user_counter -= decr; - } - } - dmap->qlen++; - - if (!(adev->flags & DMA_AUTOMODE)) { - if (dmap->needs_reorg) - reorganize_buffers(dev, dmap, 0); - local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use,DMA_MODE_READ); - adev->d->start_input(dev, dmap->raw_buf_phys + dmap->qtail * dmap->fragment_size, - dmap->fragment_size, 1); - if (adev->d->trigger) - adev->d->trigger(dev, adev->enable_bits * adev->go); - } - dmap->flags |= DMA_ACTIVE; - } else if (dmap->qlen >= (dmap->nbufs - 1)) { - printk(KERN_WARNING "Sound: Recording overrun\n"); - dmap->underrun_count++; - - /* Just throw away the oldest fragment but keep the engine running */ - dmap->qhead = (dmap->qhead + 1) % dmap->nbufs; - dmap->qtail = (dmap->qtail + 1) % dmap->nbufs; - } else if (dmap->qlen >= 0 && dmap->qlen < dmap->nbufs) { - dmap->qlen++; - dmap->qtail = (dmap->qtail + 1) % dmap->nbufs; - if (dmap->qtail == 0) { /* Wrapped */ - dmap->byte_counter += dmap->bytes_in_use; - if (dmap->byte_counter >= dmap->max_byte_counter) { /* Overflow */ - long decr = dmap->byte_counter; - dmap->byte_counter = (dmap->byte_counter % dmap->bytes_in_use) + dmap->bytes_in_use; - decr -= dmap->byte_counter; - dmap->user_counter -= decr; - } - } - } - if (!(adev->flags & DMA_AUTOMODE) || (dmap->flags & DMA_NODMA)) { - local_start_dma(adev, dmap->raw_buf_phys, dmap->bytes_in_use, DMA_MODE_READ); - adev->d->start_input(dev, dmap->raw_buf_phys + dmap->qtail * dmap->fragment_size, dmap->fragment_size, 1); - if (adev->d->trigger) - adev->d->trigger(dev,adev->enable_bits * adev->go); - } - dmap->flags |= DMA_ACTIVE; - if (dmap->qlen > 0) - { - wake_up(&adev->in_sleeper); - wake_up(&adev->poll_sleeper); - } -} -/* called in irq context */ -void DMAbuf_inputintr(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_in; - unsigned long flags; - - spin_lock_irqsave(&dmap->lock,flags); - - if (!(dmap->flags & DMA_NODMA)) { - int chan = dmap->dma, pos, n; - unsigned long f; - - f=claim_dma_lock(); - if(!isa_dma_bridge_buggy) - disable_dma(dmap->dma); - clear_dma_ff(chan); - pos = dmap->bytes_in_use - get_dma_residue(chan); - if(!isa_dma_bridge_buggy) - enable_dma(dmap->dma); - release_dma_lock(f); - - pos = pos / dmap->fragment_size; /* Actual qhead */ - if (pos < 0 || pos >= dmap->nbufs) - pos = 0; - - n = 0; - while (dmap->qtail != pos && ++n < dmap->nbufs) - do_inputintr(dev); - } else - do_inputintr(dev); - spin_unlock_irqrestore(&dmap->lock,flags); -} -EXPORT_SYMBOL(DMAbuf_inputintr); - -void DMAbuf_init(int dev, int dma1, int dma2) -{ - struct audio_operations *adev = audio_devs[dev]; - /* - * NOTE! This routine could be called several times. - */ - - if (adev && adev->dmap_out == NULL) { - if (adev->d == NULL) - panic("OSS: audio_devs[%d]->d == NULL\n", dev); - - if (adev->parent_dev) { /* Use DMA map of the parent dev */ - int parent = adev->parent_dev - 1; - adev->dmap_out = audio_devs[parent]->dmap_out; - adev->dmap_in = audio_devs[parent]->dmap_in; - } else { - adev->dmap_out = adev->dmap_in = &adev->dmaps[0]; - adev->dmap_out->dma = dma1; - if (adev->flags & DMA_DUPLEX) { - adev->dmap_in = &adev->dmaps[1]; - adev->dmap_in->dma = dma2; - } - } - /* Persistent DMA buffers allocated here */ - if (sound_dmap_flag == DMAP_KEEP_ON_CLOSE) { - if (adev->dmap_in->raw_buf == NULL) - sound_alloc_dmap(adev->dmap_in); - if (adev->dmap_out->raw_buf == NULL) - sound_alloc_dmap(adev->dmap_out); - } - } -} - -/* No kernel lock - DMAbuf_activate_recording protected by global cli/sti */ -static unsigned int poll_input(struct file * file, int dev, poll_table *wait) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_in; - - if (!(adev->open_mode & OPEN_READ)) - return 0; - if (dmap->mapping_flags & DMA_MAP_MAPPED) { - if (dmap->qlen) - return POLLIN | POLLRDNORM; - return 0; - } - if (dmap->dma_mode != DMODE_INPUT) { - if (dmap->dma_mode == DMODE_NONE && - adev->enable_bits & PCM_ENABLE_INPUT && - !dmap->qlen && adev->go) { - unsigned long flags; - - spin_lock_irqsave(&dmap->lock,flags); - DMAbuf_activate_recording(dev, dmap); - spin_unlock_irqrestore(&dmap->lock,flags); - } - return 0; - } - if (!dmap->qlen) - return 0; - return POLLIN | POLLRDNORM; -} - -static unsigned int poll_output(struct file * file, int dev, poll_table *wait) -{ - struct audio_operations *adev = audio_devs[dev]; - struct dma_buffparms *dmap = adev->dmap_out; - - if (!(adev->open_mode & OPEN_WRITE)) - return 0; - if (dmap->mapping_flags & DMA_MAP_MAPPED) { - if (dmap->qlen) - return POLLOUT | POLLWRNORM; - return 0; - } - if (dmap->dma_mode == DMODE_INPUT) - return 0; - if (dmap->dma_mode == DMODE_NONE) - return POLLOUT | POLLWRNORM; - if (!DMAbuf_space_in_queue(dev)) - return 0; - return POLLOUT | POLLWRNORM; -} - -unsigned int DMAbuf_poll(struct file * file, int dev, poll_table *wait) -{ - struct audio_operations *adev = audio_devs[dev]; - poll_wait(file, &adev->poll_sleeper, wait); - return poll_input(file, dev, wait) | poll_output(file, dev, wait); -} - -void DMAbuf_deinit(int dev) -{ - struct audio_operations *adev = audio_devs[dev]; - /* This routine is called when driver is being unloaded */ - if (!adev) - return; - - /* Persistent DMA buffers deallocated here */ - if (sound_dmap_flag == DMAP_KEEP_ON_CLOSE) { - sound_free_dmap(adev->dmap_out); - if (adev->flags & DMA_DUPLEX) - sound_free_dmap(adev->dmap_in); - } -} diff --git a/sound/oss/hex2hex.c b/sound/oss/hex2hex.c deleted file mode 100644 index 041ef5c52bc2..000000000000 --- a/sound/oss/hex2hex.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * hex2hex reads stdin in Intel HEX format and produces an - * (unsigned char) array which contains the bytes and writes it - * to stdout using C syntax - */ - -#include <stdio.h> -#include <string.h> -#include <stdlib.h> - -#define ABANDON(why) { fprintf(stderr, "%s\n", why); exit(1); } -#define MAX_SIZE (256*1024) -unsigned char buf[MAX_SIZE]; - -static int loadhex(FILE *inf, unsigned char *buf) -{ - int l=0, c, i; - - while ((c=getc(inf))!=EOF) - { - if (c == ':') /* Sync with beginning of line */ - { - int n, check; - unsigned char sum; - int addr; - int linetype; - - if (fscanf(inf, "%02x", &n) != 1) - ABANDON("File format error"); - sum = n; - - if (fscanf(inf, "%04x", &addr) != 1) - ABANDON("File format error"); - sum += addr/256; - sum += addr%256; - - if (fscanf(inf, "%02x", &linetype) != 1) - ABANDON("File format error"); - sum += linetype; - - if (linetype != 0) - continue; - - for (i=0;i<n;i++) - { - if (fscanf(inf, "%02x", &c) != 1) - ABANDON("File format error"); - if (addr >= MAX_SIZE) - ABANDON("File too large"); - buf[addr++] = c; - if (addr > l) - l = addr; - sum += c; - } - - if (fscanf(inf, "%02x", &check) != 1) - ABANDON("File format error"); - - sum = ~sum + 1; - if (check != sum) - ABANDON("Line checksum error"); - } - } - - return l; -} - -int main( int argc, const char * argv [] ) -{ - const char * varline; - int i,l; - int id=0; - - if(argv[1] && strcmp(argv[1], "-i")==0) - { - argv++; - argc--; - id=1; - } - if(argv[1]==NULL) - { - fprintf(stderr,"hex2hex: [-i] filename\n"); - exit(1); - } - varline = argv[1]; - l = loadhex(stdin, buf); - - printf("/*\n *\t Computer generated file. Do not edit.\n */\n"); - printf("static int %s_len = %d;\n", varline, l); - printf("static unsigned char %s[] %s = {\n", varline, id?"__initdata":""); - - for (i=0;i<l;i++) - { - if (i) printf(","); - if (i && !(i % 16)) printf("\n"); - printf("0x%02x", buf[i]); - } - - printf("\n};\n\n"); - return 0; -} diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c deleted file mode 100644 index c4b0434c7604..000000000000 --- a/sound/oss/kahlua.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Initialisation code for Cyrix/NatSemi VSA1 softaudio - * - * (C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk> - * - * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems. - * The older version (VSA1) provides fairly good soundblaster emulation - * although there are a couple of bugs: large DMA buffers break record, - * and the MPU event handling seems suspect. VSA2 allows the native driver - * to control the AC97 audio engine directly and requires a different driver. - * - * Thanks to National Semiconductor for providing the needed information - * on the XpressAudio(tm) internals. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * TO DO: - * Investigate whether we can portably support Cognac (5520) in the - * same manner. - */ - -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include "sound_config.h" - -#include "sb.h" - -/* - * Read a soundblaster compatible mixer register. - * In this case we are actually reading an SMI trap - * not real hardware. - */ - -static u8 mixer_read(unsigned long io, u8 reg) -{ - outb(reg, io + 4); - udelay(20); - reg = inb(io + 5); - udelay(20); - return reg; -} - -static int probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct address_info *hw_config; - unsigned long base; - void __iomem *mem; - unsigned long io; - u16 map; - u8 irq, dma8, dma16; - int oldquiet; - extern int sb_be_quiet; - - base = pci_resource_start(pdev, 0); - if(base == 0UL) - return 1; - - mem = ioremap(base, 128); - if (!mem) - return 1; - map = readw(mem + 0x18); /* Read the SMI enables */ - iounmap(mem); - - /* Map bits - 0:1 * 0x20 + 0x200 = sb base - 2 sb enable - 3 adlib enable - 5 MPU enable 0x330 - 6 MPU enable 0x300 - - The other bits may be used internally so must be masked */ - - io = 0x220 + 0x20 * (map & 3); - - if(map & (1<<2)) - printk(KERN_INFO "kahlua: XpressAudio at 0x%lx\n", io); - else - return 1; - - if(map & (1<<5)) - printk(KERN_INFO "kahlua: MPU at 0x300\n"); - else if(map & (1<<6)) - printk(KERN_INFO "kahlua: MPU at 0x330\n"); - - irq = mixer_read(io, 0x80) & 0x0F; - dma8 = mixer_read(io, 0x81); - - // printk("IRQ=%x MAP=%x DMA=%x\n", irq, map, dma8); - - if(dma8 & 0x20) - dma16 = 5; - else if(dma8 & 0x40) - dma16 = 6; - else if(dma8 & 0x80) - dma16 = 7; - else - { - printk(KERN_ERR "kahlua: No 16bit DMA enabled.\n"); - return 1; - } - - if(dma8 & 0x01) - dma8 = 0; - else if(dma8 & 0x02) - dma8 = 1; - else if(dma8 & 0x08) - dma8 = 3; - else - { - printk(KERN_ERR "kahlua: No 8bit DMA enabled.\n"); - return 1; - } - - if(irq & 1) - irq = 9; - else if(irq & 2) - irq = 5; - else if(irq & 4) - irq = 7; - else if(irq & 8) - irq = 10; - else - { - printk(KERN_ERR "kahlua: SB IRQ not set.\n"); - return 1; - } - - printk(KERN_INFO "kahlua: XpressAudio on IRQ %d, DMA %d, %d\n", - irq, dma8, dma16); - - hw_config = kzalloc(sizeof(struct address_info), GFP_KERNEL); - if(hw_config == NULL) - { - printk(KERN_ERR "kahlua: out of memory.\n"); - return 1; - } - - pci_set_drvdata(pdev, hw_config); - - hw_config->io_base = io; - hw_config->irq = irq; - hw_config->dma = dma8; - hw_config->dma2 = dma16; - hw_config->name = "Cyrix XpressAudio"; - hw_config->driver_use_1 = SB_NO_MIDI | SB_PCI_IRQ; - - if (!request_region(io, 16, "soundblaster")) - goto err_out_free; - - if(sb_dsp_detect(hw_config, 0, 0, NULL)==0) - { - printk(KERN_ERR "kahlua: audio not responding.\n"); - release_region(io, 16); - goto err_out_free; - } - - oldquiet = sb_be_quiet; - sb_be_quiet = 1; - if(sb_dsp_init(hw_config, THIS_MODULE)) - { - sb_be_quiet = oldquiet; - goto err_out_free; - } - sb_be_quiet = oldquiet; - - return 0; - -err_out_free: - kfree(hw_config); - return 1; -} - -static void remove_one(struct pci_dev *pdev) -{ - struct address_info *hw_config = pci_get_drvdata(pdev); - sb_dsp_unload(hw_config, 0); - kfree(hw_config); -} - -MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("Kahlua VSA1 PCI Audio"); -MODULE_LICENSE("GPL"); - -/* - * 5530 only. The 5510/5520 decode is different. - */ - -static const struct pci_device_id id_tbl[] = { - { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 }, - { } -}; - -MODULE_DEVICE_TABLE(pci, id_tbl); - -static struct pci_driver kahlua_driver = { - .name = "kahlua", - .id_table = id_tbl, - .probe = probe_one, - .remove = remove_one, -}; - - -static int __init kahlua_init_module(void) -{ - printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n"); - return pci_register_driver(&kahlua_driver); -} - -static void kahlua_cleanup_module(void) -{ - pci_unregister_driver(&kahlua_driver); -} - - -module_init(kahlua_init_module); -module_exit(kahlua_cleanup_module); - diff --git a/sound/oss/midi_ctrl.h b/sound/oss/midi_ctrl.h deleted file mode 100644 index 3353e5a67c24..000000000000 --- a/sound/oss/midi_ctrl.h +++ /dev/null @@ -1,22 +0,0 @@ -static unsigned char ctrl_def_values[128] = -{ - 0x40,0x00,0x40,0x40, 0x40,0x40,0x40,0x7f, /* 0 to 7 */ - 0x40,0x40,0x40,0x7f, 0x40,0x40,0x40,0x40, /* 8 to 15 */ - 0x40,0x40,0x40,0x40, 0x40,0x40,0x40,0x40, /* 16 to 23 */ - 0x40,0x40,0x40,0x40, 0x40,0x40,0x40,0x40, /* 24 to 31 */ - - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 32 to 39 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 40 to 47 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 48 to 55 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 56 to 63 */ - - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 64 to 71 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 72 to 79 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 80 to 87 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 88 to 95 */ - - 0x00,0x00,0x7f,0x7f, 0x7f,0x7f,0x00,0x00, /* 96 to 103 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 104 to 111 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 112 to 119 */ - 0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00, /* 120 to 127 */ -}; diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c deleted file mode 100644 index 2292c230d7e6..000000000000 --- a/sound/oss/midi_synth.c +++ /dev/null @@ -1,712 +0,0 @@ -/* - * sound/oss/midi_synth.c - * - * High level midi sequencer manager for dumb MIDI interfaces. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Andrew Veliath : fixed running status in MIDI input state machine - */ -#define USE_SEQ_MACROS -#define USE_SIMPLE_MACROS - -#include "sound_config.h" - -#define _MIDI_SYNTH_C_ - -#include "midi_synth.h" - -static int midi2synth[MAX_MIDI_DEV]; -static int sysex_state[MAX_MIDI_DEV] = -{0}; -static unsigned char prev_out_status[MAX_MIDI_DEV]; - -#define STORE(cmd) \ -{ \ - int len; \ - unsigned char obuf[8]; \ - cmd; \ - seq_input_event(obuf, len); \ -} - -#define _seqbuf obuf -#define _seqbufptr 0 -#define _SEQ_ADVBUF(x) len=x - -void -do_midi_msg(int synthno, unsigned char *msg, int mlen) -{ - switch (msg[0] & 0xf0) - { - case 0x90: - if (msg[2] != 0) - { - STORE(SEQ_START_NOTE(synthno, msg[0] & 0x0f, msg[1], msg[2])); - break; - } - msg[2] = 64; - - case 0x80: - STORE(SEQ_STOP_NOTE(synthno, msg[0] & 0x0f, msg[1], msg[2])); - break; - - case 0xA0: - STORE(SEQ_KEY_PRESSURE(synthno, msg[0] & 0x0f, msg[1], msg[2])); - break; - - case 0xB0: - STORE(SEQ_CONTROL(synthno, msg[0] & 0x0f, - msg[1], msg[2])); - break; - - case 0xC0: - STORE(SEQ_SET_PATCH(synthno, msg[0] & 0x0f, msg[1])); - break; - - case 0xD0: - STORE(SEQ_CHN_PRESSURE(synthno, msg[0] & 0x0f, msg[1])); - break; - - case 0xE0: - STORE(SEQ_BENDER(synthno, msg[0] & 0x0f, - (msg[1] & 0x7f) | ((msg[2] & 0x7f) << 7))); - break; - - default: - /* printk( "MPU: Unknown midi channel message %02x\n", msg[0]); */ - ; - } -} -EXPORT_SYMBOL(do_midi_msg); - -static void -midi_outc(int midi_dev, int data) -{ - int timeout; - - for (timeout = 0; timeout < 3200; timeout++) - if (midi_devs[midi_dev]->outputc(midi_dev, (unsigned char) (data & 0xff))) - { - if (data & 0x80) /* - * Status byte - */ - prev_out_status[midi_dev] = - (unsigned char) (data & 0xff); /* - * Store for running status - */ - return; /* - * Mission complete - */ - } - /* - * Sorry! No space on buffers. - */ - printk("Midi send timed out\n"); -} - -static int -prefix_cmd(int midi_dev, unsigned char status) -{ - if ((char *) midi_devs[midi_dev]->prefix_cmd == NULL) - return 1; - - return midi_devs[midi_dev]->prefix_cmd(midi_dev, status); -} - -static void -midi_synth_input(int orig_dev, unsigned char data) -{ - int dev; - struct midi_input_info *inc; - - static unsigned char len_tab[] = /* # of data bytes following a status - */ - { - 2, /* 8x */ - 2, /* 9x */ - 2, /* Ax */ - 2, /* Bx */ - 1, /* Cx */ - 1, /* Dx */ - 2, /* Ex */ - 0 /* Fx */ - }; - - if (orig_dev < 0 || orig_dev > num_midis || midi_devs[orig_dev] == NULL) - return; - - if (data == 0xfe) /* Ignore active sensing */ - return; - - dev = midi2synth[orig_dev]; - inc = &midi_devs[orig_dev]->in_info; - - switch (inc->m_state) - { - case MST_INIT: - if (data & 0x80) /* MIDI status byte */ - { - if ((data & 0xf0) == 0xf0) /* Common message */ - { - switch (data) - { - case 0xf0: /* Sysex */ - inc->m_state = MST_SYSEX; - break; /* Sysex */ - - case 0xf1: /* MTC quarter frame */ - case 0xf3: /* Song select */ - inc->m_state = MST_DATA; - inc->m_ptr = 1; - inc->m_left = 1; - inc->m_buf[0] = data; - break; - - case 0xf2: /* Song position pointer */ - inc->m_state = MST_DATA; - inc->m_ptr = 1; - inc->m_left = 2; - inc->m_buf[0] = data; - break; - - default: - inc->m_buf[0] = data; - inc->m_ptr = 1; - do_midi_msg(dev, inc->m_buf, inc->m_ptr); - inc->m_ptr = 0; - inc->m_left = 0; - } - } else - { - inc->m_state = MST_DATA; - inc->m_ptr = 1; - inc->m_left = len_tab[(data >> 4) - 8]; - inc->m_buf[0] = inc->m_prev_status = data; - } - } else if (inc->m_prev_status & 0x80) { - /* Data byte (use running status) */ - inc->m_ptr = 2; - inc->m_buf[1] = data; - inc->m_buf[0] = inc->m_prev_status; - inc->m_left = len_tab[(inc->m_buf[0] >> 4) - 8] - 1; - if (inc->m_left > 0) - inc->m_state = MST_DATA; /* Not done yet */ - else { - inc->m_state = MST_INIT; - do_midi_msg(dev, inc->m_buf, inc->m_ptr); - inc->m_ptr = 0; - } - } - break; /* MST_INIT */ - - case MST_DATA: - inc->m_buf[inc->m_ptr++] = data; - if (--inc->m_left <= 0) - { - inc->m_state = MST_INIT; - do_midi_msg(dev, inc->m_buf, inc->m_ptr); - inc->m_ptr = 0; - } - break; /* MST_DATA */ - - case MST_SYSEX: - if (data == 0xf7) /* Sysex end */ - { - inc->m_state = MST_INIT; - inc->m_left = 0; - inc->m_ptr = 0; - } - break; /* MST_SYSEX */ - - default: - printk("MIDI%d: Unexpected state %d (%02x)\n", orig_dev, inc->m_state, (int) data); - inc->m_state = MST_INIT; - } -} - -static void -leave_sysex(int dev) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int timeout = 0; - - if (!sysex_state[dev]) - return; - - sysex_state[dev] = 0; - - while (!midi_devs[orig_dev]->outputc(orig_dev, 0xf7) && - timeout < 1000) - timeout++; - - sysex_state[dev] = 0; -} - -static void -midi_synth_output(int dev) -{ - /* - * Currently NOP - */ -} - -int midi_synth_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - /* - * int orig_dev = synth_devs[dev]->midi_dev; - */ - - switch (cmd) { - - case SNDCTL_SYNTH_INFO: - if (__copy_to_user(arg, synth_devs[dev]->info, sizeof(struct synth_info))) - return -EFAULT; - return 0; - - case SNDCTL_SYNTH_MEMAVL: - return 0x7fffffff; - - default: - return -EINVAL; - } -} -EXPORT_SYMBOL(midi_synth_ioctl); - -int -midi_synth_kill_note(int dev, int channel, int note, int velocity) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int msg, chn; - - if (note < 0 || note > 127) - return 0; - if (channel < 0 || channel > 15) - return 0; - if (velocity < 0) - velocity = 0; - if (velocity > 127) - velocity = 127; - - leave_sysex(dev); - - msg = prev_out_status[orig_dev] & 0xf0; - chn = prev_out_status[orig_dev] & 0x0f; - - if (chn == channel && ((msg == 0x90 && velocity == 64) || msg == 0x80)) - { /* - * Use running status - */ - if (!prefix_cmd(orig_dev, note)) - return 0; - - midi_outc(orig_dev, note); - - if (msg == 0x90) /* - * Running status = Note on - */ - midi_outc(orig_dev, 0); /* - * Note on with velocity 0 == note - * off - */ - else - midi_outc(orig_dev, velocity); - } else - { - if (velocity == 64) - { - if (!prefix_cmd(orig_dev, 0x90 | (channel & 0x0f))) - return 0; - midi_outc(orig_dev, 0x90 | (channel & 0x0f)); /* - * Note on - */ - midi_outc(orig_dev, note); - midi_outc(orig_dev, 0); /* - * Zero G - */ - } else - { - if (!prefix_cmd(orig_dev, 0x80 | (channel & 0x0f))) - return 0; - midi_outc(orig_dev, 0x80 | (channel & 0x0f)); /* - * Note off - */ - midi_outc(orig_dev, note); - midi_outc(orig_dev, velocity); - } - } - - return 0; -} -EXPORT_SYMBOL(midi_synth_kill_note); - -int -midi_synth_set_instr(int dev, int channel, int instr_no) -{ - int orig_dev = synth_devs[dev]->midi_dev; - - if (instr_no < 0 || instr_no > 127) - instr_no = 0; - if (channel < 0 || channel > 15) - return 0; - - leave_sysex(dev); - - if (!prefix_cmd(orig_dev, 0xc0 | (channel & 0x0f))) - return 0; - midi_outc(orig_dev, 0xc0 | (channel & 0x0f)); /* - * Program change - */ - midi_outc(orig_dev, instr_no); - - return 0; -} -EXPORT_SYMBOL(midi_synth_set_instr); - -int -midi_synth_start_note(int dev, int channel, int note, int velocity) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int msg, chn; - - if (note < 0 || note > 127) - return 0; - if (channel < 0 || channel > 15) - return 0; - if (velocity < 0) - velocity = 0; - if (velocity > 127) - velocity = 127; - - leave_sysex(dev); - - msg = prev_out_status[orig_dev] & 0xf0; - chn = prev_out_status[orig_dev] & 0x0f; - - if (chn == channel && msg == 0x90) - { /* - * Use running status - */ - if (!prefix_cmd(orig_dev, note)) - return 0; - midi_outc(orig_dev, note); - midi_outc(orig_dev, velocity); - } else - { - if (!prefix_cmd(orig_dev, 0x90 | (channel & 0x0f))) - return 0; - midi_outc(orig_dev, 0x90 | (channel & 0x0f)); /* - * Note on - */ - midi_outc(orig_dev, note); - midi_outc(orig_dev, velocity); - } - return 0; -} -EXPORT_SYMBOL(midi_synth_start_note); - -void -midi_synth_reset(int dev) -{ - - leave_sysex(dev); -} -EXPORT_SYMBOL(midi_synth_reset); - -int -midi_synth_open(int dev, int mode) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int err; - struct midi_input_info *inc; - - if (orig_dev < 0 || orig_dev >= num_midis || midi_devs[orig_dev] == NULL) - return -ENXIO; - - midi2synth[orig_dev] = dev; - sysex_state[dev] = 0; - prev_out_status[orig_dev] = 0; - - if ((err = midi_devs[orig_dev]->open(orig_dev, mode, - midi_synth_input, midi_synth_output)) < 0) - return err; - inc = &midi_devs[orig_dev]->in_info; - - /* save_flags(flags); - cli(); - don't know against what irqhandler to protect*/ - inc->m_busy = 0; - inc->m_state = MST_INIT; - inc->m_ptr = 0; - inc->m_left = 0; - inc->m_prev_status = 0x00; - /* restore_flags(flags); */ - - return 1; -} -EXPORT_SYMBOL(midi_synth_open); - -void -midi_synth_close(int dev) -{ - int orig_dev = synth_devs[dev]->midi_dev; - - leave_sysex(dev); - - /* - * Shut up the synths by sending just single active sensing message. - */ - midi_devs[orig_dev]->outputc(orig_dev, 0xfe); - - midi_devs[orig_dev]->close(orig_dev); -} -EXPORT_SYMBOL(midi_synth_close); - -void -midi_synth_hw_control(int dev, unsigned char *event) -{ -} -EXPORT_SYMBOL(midi_synth_hw_control); - -int -midi_synth_load_patch(int dev, int format, const char __user *addr, - int count, int pmgr_flag) -{ - int orig_dev = synth_devs[dev]->midi_dev; - - struct sysex_info sysex; - int i; - unsigned long left, src_offs, eox_seen = 0; - int first_byte = 1; - int hdr_size = (unsigned long) &sysex.data[0] - (unsigned long) &sysex; - - leave_sysex(dev); - - if (!prefix_cmd(orig_dev, 0xf0)) - return 0; - - /* Invalid patch format */ - if (format != SYSEX_PATCH) - return -EINVAL; - - /* Patch header too short */ - if (count < hdr_size) - return -EINVAL; - - count -= hdr_size; - - /* - * Copy the header from user space - */ - - if (copy_from_user(&sysex, addr, hdr_size)) - return -EFAULT; - - /* Sysex record too short */ - if ((unsigned)count < (unsigned)sysex.len) - sysex.len = count; - - left = sysex.len; - src_offs = 0; - - for (i = 0; i < left && !signal_pending(current); i++) - { - unsigned char data; - - if (get_user(data, - (unsigned char __user *)(addr + hdr_size + i))) - return -EFAULT; - - eox_seen = (i > 0 && data & 0x80); /* End of sysex */ - - if (eox_seen && data != 0xf7) - data = 0xf7; - - if (i == 0) - { - if (data != 0xf0) - { - printk(KERN_WARNING "midi_synth: Sysex start missing\n"); - return -EINVAL; - } - } - while (!midi_devs[orig_dev]->outputc(orig_dev, (unsigned char) (data & 0xff)) && - !signal_pending(current)) - schedule(); - - if (!first_byte && data & 0x80) - return 0; - first_byte = 0; - } - - if (!eox_seen) - midi_outc(orig_dev, 0xf7); - return 0; -} -EXPORT_SYMBOL(midi_synth_load_patch); - -void midi_synth_panning(int dev, int channel, int pressure) -{ -} -EXPORT_SYMBOL(midi_synth_panning); - -void midi_synth_aftertouch(int dev, int channel, int pressure) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int msg, chn; - - if (pressure < 0 || pressure > 127) - return; - if (channel < 0 || channel > 15) - return; - - leave_sysex(dev); - - msg = prev_out_status[orig_dev] & 0xf0; - chn = prev_out_status[orig_dev] & 0x0f; - - if (msg != 0xd0 || chn != channel) /* - * Test for running status - */ - { - if (!prefix_cmd(orig_dev, 0xd0 | (channel & 0x0f))) - return; - midi_outc(orig_dev, 0xd0 | (channel & 0x0f)); /* - * Channel pressure - */ - } else if (!prefix_cmd(orig_dev, pressure)) - return; - - midi_outc(orig_dev, pressure); -} -EXPORT_SYMBOL(midi_synth_aftertouch); - -void -midi_synth_controller(int dev, int channel, int ctrl_num, int value) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int chn, msg; - - if (ctrl_num < 0 || ctrl_num > 127) - return; - if (channel < 0 || channel > 15) - return; - - leave_sysex(dev); - - msg = prev_out_status[orig_dev] & 0xf0; - chn = prev_out_status[orig_dev] & 0x0f; - - if (msg != 0xb0 || chn != channel) - { - if (!prefix_cmd(orig_dev, 0xb0 | (channel & 0x0f))) - return; - midi_outc(orig_dev, 0xb0 | (channel & 0x0f)); - } else if (!prefix_cmd(orig_dev, ctrl_num)) - return; - - midi_outc(orig_dev, ctrl_num); - midi_outc(orig_dev, value & 0x7f); -} -EXPORT_SYMBOL(midi_synth_controller); - -void -midi_synth_bender(int dev, int channel, int value) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int msg, prev_chn; - - if (channel < 0 || channel > 15) - return; - - if (value < 0 || value > 16383) - return; - - leave_sysex(dev); - - msg = prev_out_status[orig_dev] & 0xf0; - prev_chn = prev_out_status[orig_dev] & 0x0f; - - if (msg != 0xd0 || prev_chn != channel) /* - * Test for running status - */ - { - if (!prefix_cmd(orig_dev, 0xe0 | (channel & 0x0f))) - return; - midi_outc(orig_dev, 0xe0 | (channel & 0x0f)); - } else if (!prefix_cmd(orig_dev, value & 0x7f)) - return; - - midi_outc(orig_dev, value & 0x7f); - midi_outc(orig_dev, (value >> 7) & 0x7f); -} -EXPORT_SYMBOL(midi_synth_bender); - -void -midi_synth_setup_voice(int dev, int voice, int channel) -{ -} -EXPORT_SYMBOL(midi_synth_setup_voice); - -int -midi_synth_send_sysex(int dev, unsigned char *bytes, int len) -{ - int orig_dev = synth_devs[dev]->midi_dev; - int i; - - for (i = 0; i < len; i++) - { - switch (bytes[i]) - { - case 0xf0: /* Start sysex */ - if (!prefix_cmd(orig_dev, 0xf0)) - return 0; - sysex_state[dev] = 1; - break; - - case 0xf7: /* End sysex */ - if (!sysex_state[dev]) /* Orphan sysex end */ - return 0; - sysex_state[dev] = 0; - break; - - default: - if (!sysex_state[dev]) - return 0; - - if (bytes[i] & 0x80) /* Error. Another message before sysex end */ - { - bytes[i] = 0xf7; /* Sysex end */ - sysex_state[dev] = 0; - } - } - - if (!midi_devs[orig_dev]->outputc(orig_dev, bytes[i])) - { -/* - * Hardware level buffer is full. Abort the sysex message. - */ - - int timeout = 0; - - bytes[i] = 0xf7; - sysex_state[dev] = 0; - - while (!midi_devs[orig_dev]->outputc(orig_dev, bytes[i]) && - timeout < 1000) - timeout++; - } - if (!sysex_state[dev]) - return 0; - } - - return 0; -} -EXPORT_SYMBOL(midi_synth_send_sysex); - diff --git a/sound/oss/midi_synth.h b/sound/oss/midi_synth.h deleted file mode 100644 index b64ddd6c4abc..000000000000 --- a/sound/oss/midi_synth.h +++ /dev/null @@ -1,47 +0,0 @@ -int midi_synth_ioctl (int dev, - unsigned int cmd, void __user * arg); -int midi_synth_kill_note (int dev, int channel, int note, int velocity); -int midi_synth_set_instr (int dev, int channel, int instr_no); -int midi_synth_start_note (int dev, int channel, int note, int volume); -void midi_synth_reset (int dev); -int midi_synth_open (int dev, int mode); -void midi_synth_close (int dev); -void midi_synth_hw_control (int dev, unsigned char *event); -int midi_synth_load_patch (int dev, int format, const char __user * addr, - int count, int pmgr_flag); -void midi_synth_panning (int dev, int channel, int pressure); -void midi_synth_aftertouch (int dev, int channel, int pressure); -void midi_synth_controller (int dev, int channel, int ctrl_num, int value); -void midi_synth_bender (int dev, int chn, int value); -void midi_synth_setup_voice (int dev, int voice, int chn); -int midi_synth_send_sysex(int dev, unsigned char *bytes,int len); - -#ifndef _MIDI_SYNTH_C_ -static struct synth_info std_synth_info = -{MIDI_SYNTH_NAME, 0, SYNTH_TYPE_MIDI, 0, 0, 128, 0, 128, MIDI_SYNTH_CAPS}; - -static struct synth_operations std_midi_synth = -{ - .owner = THIS_MODULE, - .id = "MIDI", - .info = &std_synth_info, - .midi_dev = 0, - .synth_type = SYNTH_TYPE_MIDI, - .synth_subtype = 0, - .open = midi_synth_open, - .close = midi_synth_close, - .ioctl = midi_synth_ioctl, - .kill_note = midi_synth_kill_note, - .start_note = midi_synth_start_note, - .set_instr = midi_synth_set_instr, - .reset = midi_synth_reset, - .hw_control = midi_synth_hw_control, - .load_patch = midi_synth_load_patch, - .aftertouch = midi_synth_aftertouch, - .controller = midi_synth_controller, - .panning = midi_synth_panning, - .bender = midi_synth_bender, - .setup_voice = midi_synth_setup_voice, - .send_sysex = midi_synth_send_sysex -}; -#endif diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c deleted file mode 100644 index 701c7625c971..000000000000 --- a/sound/oss/midibuf.c +++ /dev/null @@ -1,427 +0,0 @@ -/* - * sound/oss/midibuf.c - * - * Device file manager for /dev/midi# - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - */ -#include <linux/stddef.h> -#include <linux/kmod.h> -#include <linux/spinlock.h> -#include <linux/sched/signal.h> - -#define MIDIBUF_C - -#include "sound_config.h" - - -/* - * Don't make MAX_QUEUE_SIZE larger than 4000 - */ - -#define MAX_QUEUE_SIZE 4000 - -static wait_queue_head_t midi_sleeper[MAX_MIDI_DEV]; -static wait_queue_head_t input_sleeper[MAX_MIDI_DEV]; - -struct midi_buf -{ - int len, head, tail; - unsigned char queue[MAX_QUEUE_SIZE]; -}; - -struct midi_parms -{ - long prech_timeout; /* - * Timeout before the first ch - */ -}; - -static struct midi_buf *midi_out_buf[MAX_MIDI_DEV] = {NULL}; -static struct midi_buf *midi_in_buf[MAX_MIDI_DEV] = {NULL}; -static struct midi_parms parms[MAX_MIDI_DEV]; - -static void midi_poll(unsigned long dummy); - - -static DEFINE_TIMER(poll_timer, midi_poll, 0, 0); - -static volatile int open_devs; -static DEFINE_SPINLOCK(lock); - -#define DATA_AVAIL(q) (q->len) -#define SPACE_AVAIL(q) (MAX_QUEUE_SIZE - q->len) - -#define QUEUE_BYTE(q, data) \ - if (SPACE_AVAIL(q)) \ - { \ - unsigned long flags; \ - spin_lock_irqsave(&lock, flags); \ - q->queue[q->tail] = (data); \ - q->len++; q->tail = (q->tail+1) % MAX_QUEUE_SIZE; \ - spin_unlock_irqrestore(&lock, flags); \ - } - -#define REMOVE_BYTE(q, data) \ - if (DATA_AVAIL(q)) \ - { \ - unsigned long flags; \ - spin_lock_irqsave(&lock, flags); \ - data = q->queue[q->head]; \ - q->len--; q->head = (q->head+1) % MAX_QUEUE_SIZE; \ - spin_unlock_irqrestore(&lock, flags); \ - } - -static void drain_midi_queue(int dev) -{ - - /* - * Give the Midi driver time to drain its output queues - */ - - if (midi_devs[dev]->buffer_status != NULL) - wait_event_interruptible_timeout(midi_sleeper[dev], - !midi_devs[dev]->buffer_status(dev), HZ/10); -} - -static void midi_input_intr(int dev, unsigned char data) -{ - if (midi_in_buf[dev] == NULL) - return; - - if (data == 0xfe) /* - * Active sensing - */ - return; /* - * Ignore - */ - - if (SPACE_AVAIL(midi_in_buf[dev])) { - QUEUE_BYTE(midi_in_buf[dev], data); - wake_up(&input_sleeper[dev]); - } -} - -static void midi_output_intr(int dev) -{ - /* - * Currently NOP - */ -} - -static void midi_poll(unsigned long dummy) -{ - unsigned long flags; - int dev; - - spin_lock_irqsave(&lock, flags); - if (open_devs) - { - for (dev = 0; dev < num_midis; dev++) - if (midi_devs[dev] != NULL && midi_out_buf[dev] != NULL) - { - while (DATA_AVAIL(midi_out_buf[dev])) - { - int ok; - int c = midi_out_buf[dev]->queue[midi_out_buf[dev]->head]; - - spin_unlock_irqrestore(&lock,flags);/* Give some time to others */ - ok = midi_devs[dev]->outputc(dev, c); - spin_lock_irqsave(&lock, flags); - if (!ok) - break; - midi_out_buf[dev]->head = (midi_out_buf[dev]->head + 1) % MAX_QUEUE_SIZE; - midi_out_buf[dev]->len--; - } - - if (DATA_AVAIL(midi_out_buf[dev]) < 100) - wake_up(&midi_sleeper[dev]); - } - poll_timer.expires = (1) + jiffies; - add_timer(&poll_timer); - /* - * Come back later - */ - } - spin_unlock_irqrestore(&lock, flags); -} - -int MIDIbuf_open(int dev, struct file *file) -{ - int mode, err; - - dev = dev >> 4; - mode = translate_mode(file); - - if (num_midis > MAX_MIDI_DEV) - { - printk(KERN_ERR "midi: Too many midi interfaces\n"); - num_midis = MAX_MIDI_DEV; - } - if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL) - return -ENXIO; - /* - * Interrupts disabled. Be careful - */ - - module_put(midi_devs[dev]->owner); - - if ((err = midi_devs[dev]->open(dev, mode, - midi_input_intr, midi_output_intr)) < 0) - return err; - - parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT; - midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf)); - - if (midi_in_buf[dev] == NULL) - { - printk(KERN_WARNING "midi: Can't allocate buffer\n"); - midi_devs[dev]->close(dev); - return -EIO; - } - midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0; - - midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf)); - - if (midi_out_buf[dev] == NULL) - { - printk(KERN_WARNING "midi: Can't allocate buffer\n"); - midi_devs[dev]->close(dev); - vfree(midi_in_buf[dev]); - midi_in_buf[dev] = NULL; - return -EIO; - } - midi_out_buf[dev]->len = midi_out_buf[dev]->head = midi_out_buf[dev]->tail = 0; - open_devs++; - - init_waitqueue_head(&midi_sleeper[dev]); - init_waitqueue_head(&input_sleeper[dev]); - - if (open_devs < 2) /* This was first open */ - { - poll_timer.expires = 1 + jiffies; - add_timer(&poll_timer); /* Start polling */ - } - return err; -} - -void MIDIbuf_release(int dev, struct file *file) -{ - int mode; - - dev = dev >> 4; - mode = translate_mode(file); - - if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL) - return; - - /* - * Wait until the queue is empty - */ - - if (mode != OPEN_READ) - { - midi_devs[dev]->outputc(dev, 0xfe); /* - * Active sensing to shut the - * devices - */ - - wait_event_interruptible(midi_sleeper[dev], - !DATA_AVAIL(midi_out_buf[dev])); - /* - * Sync - */ - - drain_midi_queue(dev); /* - * Ensure the output queues are empty - */ - } - - midi_devs[dev]->close(dev); - - open_devs--; - if (open_devs == 0) - del_timer_sync(&poll_timer); - vfree(midi_in_buf[dev]); - vfree(midi_out_buf[dev]); - midi_in_buf[dev] = NULL; - midi_out_buf[dev] = NULL; - - module_put(midi_devs[dev]->owner); -} - -int MIDIbuf_write(int dev, struct file *file, const char __user *buf, int count) -{ - int c, n, i; - unsigned char tmp_data; - - dev = dev >> 4; - - if (!count) - return 0; - - c = 0; - - while (c < count) - { - n = SPACE_AVAIL(midi_out_buf[dev]); - - if (n == 0) { /* - * No space just now. - */ - - if (file->f_flags & O_NONBLOCK) { - c = -EAGAIN; - goto out; - } - - if (wait_event_interruptible(midi_sleeper[dev], - SPACE_AVAIL(midi_out_buf[dev]))) - { - c = -EINTR; - goto out; - } - n = SPACE_AVAIL(midi_out_buf[dev]); - } - if (n > (count - c)) - n = count - c; - - for (i = 0; i < n; i++) - { - /* BROKE BROKE BROKE - CAN'T DO THIS WITH CLI !! */ - /* yes, think the same, so I removed the cli() brackets - QUEUE_BYTE is protected against interrupts */ - if (copy_from_user((char *) &tmp_data, &(buf)[c], 1)) { - c = -EFAULT; - goto out; - } - QUEUE_BYTE(midi_out_buf[dev], tmp_data); - c++; - } - } -out: - return c; -} - - -int MIDIbuf_read(int dev, struct file *file, char __user *buf, int count) -{ - int n, c = 0; - unsigned char tmp_data; - - dev = dev >> 4; - - if (!DATA_AVAIL(midi_in_buf[dev])) { /* - * No data yet, wait - */ - if (file->f_flags & O_NONBLOCK) { - c = -EAGAIN; - goto out; - } - wait_event_interruptible_timeout(input_sleeper[dev], - DATA_AVAIL(midi_in_buf[dev]), - parms[dev].prech_timeout); - - if (signal_pending(current)) - c = -EINTR; /* The user is getting restless */ - } - if (c == 0 && DATA_AVAIL(midi_in_buf[dev])) /* - * Got some bytes - */ - { - n = DATA_AVAIL(midi_in_buf[dev]); - if (n > count) - n = count; - c = 0; - - while (c < n) - { - char *fixit; - REMOVE_BYTE(midi_in_buf[dev], tmp_data); - fixit = (char *) &tmp_data; - /* BROKE BROKE BROKE */ - /* yes removed the cli() brackets again - should q->len,tail&head be atomic_t? */ - if (copy_to_user(&(buf)[c], fixit, 1)) { - c = -EFAULT; - goto out; - } - c++; - } - } -out: - return c; -} - -int MIDIbuf_ioctl(int dev, struct file *file, - unsigned int cmd, void __user *arg) -{ - int val; - - dev = dev >> 4; - - if (((cmd >> 8) & 0xff) == 'C') - { - if (midi_devs[dev]->coproc) /* Coprocessor ioctl */ - return midi_devs[dev]->coproc->ioctl(midi_devs[dev]->coproc->devc, cmd, arg, 0); -/* printk("/dev/midi%d: No coprocessor for this device\n", dev);*/ - return -ENXIO; - } - else - { - switch (cmd) - { - case SNDCTL_MIDI_PRETIME: - if (get_user(val, (int __user *)arg)) - return -EFAULT; - if (val < 0) - val = 0; - val = (HZ * val) / 10; - parms[dev].prech_timeout = val; - return put_user(val, (int __user *)arg); - - default: - if (!midi_devs[dev]->ioctl) - return -EINVAL; - return midi_devs[dev]->ioctl(dev, cmd, arg); - } - } -} - -/* No kernel lock - fine */ -unsigned int MIDIbuf_poll(int dev, struct file *file, poll_table * wait) -{ - unsigned int mask = 0; - - dev = dev >> 4; - - /* input */ - poll_wait(file, &input_sleeper[dev], wait); - if (DATA_AVAIL(midi_in_buf[dev])) - mask |= POLLIN | POLLRDNORM; - - /* output */ - poll_wait(file, &midi_sleeper[dev], wait); - if (!SPACE_AVAIL(midi_out_buf[dev])) - mask |= POLLOUT | POLLWRNORM; - - return mask; -} - - -int MIDIbuf_avail(int dev) -{ - if (midi_in_buf[dev]) - return DATA_AVAIL (midi_in_buf[dev]); - return 0; -} -EXPORT_SYMBOL(MIDIbuf_avail); - diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c deleted file mode 100644 index 20e8fa46f647..000000000000 --- a/sound/oss/mpu401.c +++ /dev/null @@ -1,1804 +0,0 @@ -/* - * sound/oss/mpu401.c - * - * The low level driver for Roland MPU-401 compatible Midi cards. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer ioctl code reworked (vmalloc/vfree removed) - * Alan Cox modularisation, use normal request_irq, use dev_id - * Bartlomiej Zolnierkiewicz removed some __init to allow using many drivers - * Chris Rankin Update the module-usage counter for the coprocessor - * Zwane Mwaikambo Changed attach/unload resource freeing - */ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#define USE_SEQ_MACROS -#define USE_SIMPLE_MACROS - -#include "sound_config.h" - -#include "coproc.h" -#include "mpu401.h" - -static int timer_mode = TMR_INTERNAL, timer_caps = TMR_INTERNAL; - -struct mpu_config -{ - int base; /* - * I/O base - */ - int irq; - int opened; /* - * Open mode - */ - int devno; - int synthno; - int uart_mode; - int initialized; - int mode; -#define MODE_MIDI 1 -#define MODE_SYNTH 2 - unsigned char version, revision; - unsigned int capabilities; -#define MPU_CAP_INTLG 0x10000000 -#define MPU_CAP_SYNC 0x00000010 -#define MPU_CAP_FSK 0x00000020 -#define MPU_CAP_CLS 0x00000040 -#define MPU_CAP_SMPTE 0x00000080 -#define MPU_CAP_2PORT 0x00000001 - int timer_flag; - -#define MBUF_MAX 10 -#define BUFTEST(dc) if (dc->m_ptr >= MBUF_MAX || dc->m_ptr < 0) \ - {printk( "MPU: Invalid buffer pointer %d/%d, s=%d\n", dc->m_ptr, dc->m_left, dc->m_state);dc->m_ptr--;} - int m_busy; - unsigned char m_buf[MBUF_MAX]; - int m_ptr; - int m_state; - int m_left; - unsigned char last_status; - void (*inputintr) (int dev, unsigned char data); - int shared_irq; - int *osp; - spinlock_t lock; - }; - -#define DATAPORT(base) (base) -#define COMDPORT(base) (base+1) -#define STATPORT(base) (base+1) - - -static void mpu401_close(int dev); - -static inline int mpu401_status(struct mpu_config *devc) -{ - return inb(STATPORT(devc->base)); -} - -#define input_avail(devc) (!(mpu401_status(devc)&INPUT_AVAIL)) -#define output_ready(devc) (!(mpu401_status(devc)&OUTPUT_READY)) - -static inline void write_command(struct mpu_config *devc, unsigned char cmd) -{ - outb(cmd, COMDPORT(devc->base)); -} - -static inline int read_data(struct mpu_config *devc) -{ - return inb(DATAPORT(devc->base)); -} - -static inline void write_data(struct mpu_config *devc, unsigned char byte) -{ - outb(byte, DATAPORT(devc->base)); -} - -#define OUTPUT_READY 0x40 -#define INPUT_AVAIL 0x80 -#define MPU_ACK 0xFE -#define MPU_RESET 0xFF -#define UART_MODE_ON 0x3F - -static struct mpu_config dev_conf[MAX_MIDI_DEV]; - -static int n_mpu_devs; - -static int reset_mpu401(struct mpu_config *devc); -static void set_uart_mode(int dev, struct mpu_config *devc, int arg); - -static int mpu_timer_init(int midi_dev); -static void mpu_timer_interrupt(void); -static void timer_ext_event(struct mpu_config *devc, int event, int parm); - -static struct synth_info mpu_synth_info_proto = { - "MPU-401 MIDI interface", - 0, - SYNTH_TYPE_MIDI, - MIDI_TYPE_MPU401, - 0, 128, - 0, 128, - SYNTH_CAP_INPUT -}; - -static struct synth_info mpu_synth_info[MAX_MIDI_DEV]; - -/* - * States for the input scanner - */ - -#define ST_INIT 0 /* Ready for timing byte or msg */ -#define ST_TIMED 1 /* Leading timing byte rcvd */ -#define ST_DATABYTE 2 /* Waiting for (nr_left) data bytes */ - -#define ST_SYSMSG 100 /* System message (sysx etc). */ -#define ST_SYSEX 101 /* System exclusive msg */ -#define ST_MTC 102 /* Midi Time Code (MTC) qframe msg */ -#define ST_SONGSEL 103 /* Song select */ -#define ST_SONGPOS 104 /* Song position pointer */ - -static unsigned char len_tab[] = /* # of data bytes following a status - */ -{ - 2, /* 8x */ - 2, /* 9x */ - 2, /* Ax */ - 2, /* Bx */ - 1, /* Cx */ - 1, /* Dx */ - 2, /* Ex */ - 0 /* Fx */ -}; - -#define STORE(cmd) \ -{ \ - int len; \ - unsigned char obuf[8]; \ - cmd; \ - seq_input_event(obuf, len); \ -} - -#define _seqbuf obuf -#define _seqbufptr 0 -#define _SEQ_ADVBUF(x) len=x - -static int mpu_input_scanner(struct mpu_config *devc, unsigned char midic) -{ - - switch (devc->m_state) - { - case ST_INIT: - switch (midic) - { - case 0xf8: - /* Timer overflow */ - break; - - case 0xfc: - printk("<all end>"); - break; - - case 0xfd: - if (devc->timer_flag) - mpu_timer_interrupt(); - break; - - case 0xfe: - return MPU_ACK; - - case 0xf0: - case 0xf1: - case 0xf2: - case 0xf3: - case 0xf4: - case 0xf5: - case 0xf6: - case 0xf7: - printk("<Trk data rq #%d>", midic & 0x0f); - break; - - case 0xf9: - printk("<conductor rq>"); - break; - - case 0xff: - devc->m_state = ST_SYSMSG; - break; - - default: - if (midic <= 0xef) - { - /* printk( "mpu time: %d ", midic); */ - devc->m_state = ST_TIMED; - } - else - printk("<MPU: Unknown event %02x> ", midic); - } - break; - - case ST_TIMED: - { - int msg = ((int) (midic & 0xf0) >> 4); - - devc->m_state = ST_DATABYTE; - - if (msg < 8) /* Data byte */ - { - /* printk( "midi msg (running status) "); */ - msg = ((int) (devc->last_status & 0xf0) >> 4); - msg -= 8; - devc->m_left = len_tab[msg] - 1; - - devc->m_ptr = 2; - devc->m_buf[0] = devc->last_status; - devc->m_buf[1] = midic; - - if (devc->m_left <= 0) - { - devc->m_state = ST_INIT; - do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr); - devc->m_ptr = 0; - } - } - else if (msg == 0xf) /* MPU MARK */ - { - devc->m_state = ST_INIT; - - switch (midic) - { - case 0xf8: - /* printk( "NOP "); */ - break; - - case 0xf9: - /* printk( "meas end "); */ - break; - - case 0xfc: - /* printk( "data end "); */ - break; - - default: - printk("Unknown MPU mark %02x\n", midic); - } - } - else - { - devc->last_status = midic; - /* printk( "midi msg "); */ - msg -= 8; - devc->m_left = len_tab[msg]; - - devc->m_ptr = 1; - devc->m_buf[0] = midic; - - if (devc->m_left <= 0) - { - devc->m_state = ST_INIT; - do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr); - devc->m_ptr = 0; - } - } - } - break; - - case ST_SYSMSG: - switch (midic) - { - case 0xf0: - printk("<SYX>"); - devc->m_state = ST_SYSEX; - break; - - case 0xf1: - devc->m_state = ST_MTC; - break; - - case 0xf2: - devc->m_state = ST_SONGPOS; - devc->m_ptr = 0; - break; - - case 0xf3: - devc->m_state = ST_SONGSEL; - break; - - case 0xf6: - /* printk( "tune_request\n"); */ - devc->m_state = ST_INIT; - break; - - /* - * Real time messages - */ - case 0xf8: - /* midi clock */ - devc->m_state = ST_INIT; - timer_ext_event(devc, TMR_CLOCK, 0); - break; - - case 0xfA: - devc->m_state = ST_INIT; - timer_ext_event(devc, TMR_START, 0); - break; - - case 0xFB: - devc->m_state = ST_INIT; - timer_ext_event(devc, TMR_CONTINUE, 0); - break; - - case 0xFC: - devc->m_state = ST_INIT; - timer_ext_event(devc, TMR_STOP, 0); - break; - - case 0xFE: - /* active sensing */ - devc->m_state = ST_INIT; - break; - - case 0xff: - /* printk( "midi hard reset"); */ - devc->m_state = ST_INIT; - break; - - default: - printk("unknown MIDI sysmsg %0x\n", midic); - devc->m_state = ST_INIT; - } - break; - - case ST_MTC: - devc->m_state = ST_INIT; - printk("MTC frame %x02\n", midic); - break; - - case ST_SYSEX: - if (midic == 0xf7) - { - printk("<EOX>"); - devc->m_state = ST_INIT; - } - else - printk("%02x ", midic); - break; - - case ST_SONGPOS: - BUFTEST(devc); - devc->m_buf[devc->m_ptr++] = midic; - if (devc->m_ptr == 2) - { - devc->m_state = ST_INIT; - devc->m_ptr = 0; - timer_ext_event(devc, TMR_SPP, - ((devc->m_buf[1] & 0x7f) << 7) | - (devc->m_buf[0] & 0x7f)); - } - break; - - case ST_DATABYTE: - BUFTEST(devc); - devc->m_buf[devc->m_ptr++] = midic; - if ((--devc->m_left) <= 0) - { - devc->m_state = ST_INIT; - do_midi_msg(devc->synthno, devc->m_buf, devc->m_ptr); - devc->m_ptr = 0; - } - break; - - default: - printk("Bad state %d ", devc->m_state); - devc->m_state = ST_INIT; - } - return 1; -} - -static void mpu401_input_loop(struct mpu_config *devc) -{ - unsigned long flags; - int busy; - int n; - - spin_lock_irqsave(&devc->lock,flags); - busy = devc->m_busy; - devc->m_busy = 1; - spin_unlock_irqrestore(&devc->lock,flags); - - if (busy) /* Already inside the scanner */ - return; - - n = 50; - - while (input_avail(devc) && n-- > 0) - { - unsigned char c = read_data(devc); - - if (devc->mode == MODE_SYNTH) - { - mpu_input_scanner(devc, c); - } - else if (devc->opened & OPEN_READ && devc->inputintr != NULL) - devc->inputintr(devc->devno, c); - } - devc->m_busy = 0; -} - -static irqreturn_t mpuintr(int irq, void *dev_id) -{ - struct mpu_config *devc; - int dev = (int)(unsigned long) dev_id; - int handled = 0; - - devc = &dev_conf[dev]; - - if (input_avail(devc)) - { - handled = 1; - if (devc->base != 0 && (devc->opened & OPEN_READ || devc->mode == MODE_SYNTH)) - mpu401_input_loop(devc); - else - { - /* Dummy read (just to acknowledge the interrupt) */ - read_data(devc); - } - } - return IRQ_RETVAL(handled); -} - -static int mpu401_open(int dev, int mode, - void (*input) (int dev, unsigned char data), - void (*output) (int dev) -) -{ - int err; - struct mpu_config *devc; - struct coproc_operations *coprocessor; - - if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL) - return -ENXIO; - - devc = &dev_conf[dev]; - - if (devc->opened) - return -EBUSY; - /* - * Verify that the device is really running. - * Some devices (such as Ensoniq SoundScape don't - * work before the on board processor (OBP) is initialized - * by downloading its microcode. - */ - - if (!devc->initialized) - { - if (mpu401_status(devc) == 0xff) /* Bus float */ - { - printk(KERN_ERR "mpu401: Device not initialized properly\n"); - return -EIO; - } - reset_mpu401(devc); - } - - if ( (coprocessor = midi_devs[dev]->coproc) != NULL ) - { - if (!try_module_get(coprocessor->owner)) { - mpu401_close(dev); - return -ENODEV; - } - - if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0) - { - printk(KERN_WARNING "MPU-401: Can't access coprocessor device\n"); - mpu401_close(dev); - return err; - } - } - - set_uart_mode(dev, devc, 1); - devc->mode = MODE_MIDI; - devc->synthno = 0; - - mpu401_input_loop(devc); - - devc->inputintr = input; - devc->opened = mode; - - return 0; -} - -static void mpu401_close(int dev) -{ - struct mpu_config *devc; - struct coproc_operations *coprocessor; - - devc = &dev_conf[dev]; - if (devc->uart_mode) - reset_mpu401(devc); /* - * This disables the UART mode - */ - devc->mode = 0; - devc->inputintr = NULL; - - coprocessor = midi_devs[dev]->coproc; - if (coprocessor) { - coprocessor->close(coprocessor->devc, COPR_MIDI); - module_put(coprocessor->owner); - } - devc->opened = 0; -} - -static int mpu401_out(int dev, unsigned char midi_byte) -{ - int timeout; - unsigned long flags; - - struct mpu_config *devc; - - devc = &dev_conf[dev]; - - /* - * Sometimes it takes about 30000 loops before the output becomes ready - * (After reset). Normally it takes just about 10 loops. - */ - - for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--); - - spin_lock_irqsave(&devc->lock,flags); - if (!output_ready(devc)) - { - printk(KERN_WARNING "mpu401: Send data timeout\n"); - spin_unlock_irqrestore(&devc->lock,flags); - return 0; - } - write_data(devc, midi_byte); - spin_unlock_irqrestore(&devc->lock,flags); - return 1; -} - -static int mpu401_command(int dev, mpu_command_rec * cmd) -{ - int i, timeout, ok; - unsigned long flags; - struct mpu_config *devc; - - devc = &dev_conf[dev]; - - if (devc->uart_mode) /* - * Not possible in UART mode - */ - { - printk(KERN_WARNING "mpu401: commands not possible in the UART mode\n"); - return -EINVAL; - } - /* - * Test for input since pending input seems to block the output. - */ - if (input_avail(devc)) - mpu401_input_loop(devc); - - /* - * Sometimes it takes about 50000 loops before the output becomes ready - * (After reset). Normally it takes just about 10 loops. - */ - - timeout = 50000; -retry: - if (timeout-- <= 0) - { - printk(KERN_WARNING "mpu401: Command (0x%x) timeout\n", (int) cmd->cmd); - return -EIO; - } - spin_lock_irqsave(&devc->lock,flags); - - if (!output_ready(devc)) - { - spin_unlock_irqrestore(&devc->lock,flags); - goto retry; - } - write_command(devc, cmd->cmd); - - ok = 0; - for (timeout = 50000; timeout > 0 && !ok; timeout--) - { - if (input_avail(devc)) - { - if (devc->opened && devc->mode == MODE_SYNTH) - { - if (mpu_input_scanner(devc, read_data(devc)) == MPU_ACK) - ok = 1; - } - else - { - /* Device is not currently open. Use simpler method */ - if (read_data(devc) == MPU_ACK) - ok = 1; - } - } - } - if (!ok) - { - spin_unlock_irqrestore(&devc->lock,flags); - return -EIO; - } - if (cmd->nr_args) - { - for (i = 0; i < cmd->nr_args; i++) - { - for (timeout = 3000; timeout > 0 && !output_ready(devc); timeout--); - - if (!mpu401_out(dev, cmd->data[i])) - { - spin_unlock_irqrestore(&devc->lock,flags); - printk(KERN_WARNING "mpu401: Command (0x%x), parm send failed.\n", (int) cmd->cmd); - return -EIO; - } - } - } - cmd->data[0] = 0; - - if (cmd->nr_returns) - { - for (i = 0; i < cmd->nr_returns; i++) - { - ok = 0; - for (timeout = 5000; timeout > 0 && !ok; timeout--) - if (input_avail(devc)) - { - cmd->data[i] = read_data(devc); - ok = 1; - } - if (!ok) - { - spin_unlock_irqrestore(&devc->lock,flags); - return -EIO; - } - } - } - spin_unlock_irqrestore(&devc->lock,flags); - return 0; -} - -static int mpu_cmd(int dev, int cmd, int data) -{ - int ret; - - static mpu_command_rec rec; - - rec.cmd = cmd & 0xff; - rec.nr_args = ((cmd & 0xf0) == 0xE0); - rec.nr_returns = ((cmd & 0xf0) == 0xA0); - rec.data[0] = data & 0xff; - - if ((ret = mpu401_command(dev, &rec)) < 0) - return ret; - return (unsigned char) rec.data[0]; -} - -static int mpu401_prefix_cmd(int dev, unsigned char status) -{ - struct mpu_config *devc = &dev_conf[dev]; - - if (devc->uart_mode) - return 1; - - if (status < 0xf0) - { - if (mpu_cmd(dev, 0xD0, 0) < 0) - return 0; - return 1; - } - switch (status) - { - case 0xF0: - if (mpu_cmd(dev, 0xDF, 0) < 0) - return 0; - return 1; - - default: - return 0; - } -} - -static int mpu401_start_read(int dev) -{ - return 0; -} - -static int mpu401_end_read(int dev) -{ - return 0; -} - -static int mpu401_ioctl(int dev, unsigned cmd, void __user *arg) -{ - struct mpu_config *devc; - mpu_command_rec rec; - int val, ret; - - devc = &dev_conf[dev]; - switch (cmd) - { - case SNDCTL_MIDI_MPUMODE: - if (!(devc->capabilities & MPU_CAP_INTLG)) { /* No intelligent mode */ - printk(KERN_WARNING "mpu401: Intelligent mode not supported by the HW\n"); - return -EINVAL; - } - if (get_user(val, (int __user *)arg)) - return -EFAULT; - set_uart_mode(dev, devc, !val); - return 0; - - case SNDCTL_MIDI_MPUCMD: - if (copy_from_user(&rec, arg, sizeof(rec))) - return -EFAULT; - if ((ret = mpu401_command(dev, &rec)) < 0) - return ret; - if (copy_to_user(arg, &rec, sizeof(rec))) - return -EFAULT; - return 0; - - default: - return -EINVAL; - } -} - -static void mpu401_kick(int dev) -{ -} - -static int mpu401_buffer_status(int dev) -{ - return 0; /* - * No data in buffers - */ -} - -static int mpu_synth_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - int midi_dev; - struct mpu_config *devc; - - midi_dev = synth_devs[dev]->midi_dev; - - if (midi_dev < 0 || midi_dev >= num_midis || midi_devs[midi_dev] == NULL) - return -ENXIO; - - devc = &dev_conf[midi_dev]; - - switch (cmd) - { - - case SNDCTL_SYNTH_INFO: - if (copy_to_user(arg, &mpu_synth_info[midi_dev], - sizeof(struct synth_info))) - return -EFAULT; - return 0; - - case SNDCTL_SYNTH_MEMAVL: - return 0x7fffffff; - - default: - return -EINVAL; - } -} - -static int mpu_synth_open(int dev, int mode) -{ - int midi_dev, err; - struct mpu_config *devc; - struct coproc_operations *coprocessor; - - midi_dev = synth_devs[dev]->midi_dev; - - if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL) - return -ENXIO; - - devc = &dev_conf[midi_dev]; - - /* - * Verify that the device is really running. - * Some devices (such as Ensoniq SoundScape don't - * work before the on board processor (OBP) is initialized - * by downloading its microcode. - */ - - if (!devc->initialized) - { - if (mpu401_status(devc) == 0xff) /* Bus float */ - { - printk(KERN_ERR "mpu401: Device not initialized properly\n"); - return -EIO; - } - reset_mpu401(devc); - } - if (devc->opened) - return -EBUSY; - devc->mode = MODE_SYNTH; - devc->synthno = dev; - - devc->inputintr = NULL; - - coprocessor = midi_devs[midi_dev]->coproc; - if (coprocessor) { - if (!try_module_get(coprocessor->owner)) - return -ENODEV; - - if ((err = coprocessor->open(coprocessor->devc, COPR_MIDI)) < 0) - { - printk(KERN_WARNING "mpu401: Can't access coprocessor device\n"); - return err; - } - } - devc->opened = mode; - reset_mpu401(devc); - - if (mode & OPEN_READ) - { - mpu_cmd(midi_dev, 0x8B, 0); /* Enable data in stop mode */ - mpu_cmd(midi_dev, 0x34, 0); /* Return timing bytes in stop mode */ - mpu_cmd(midi_dev, 0x87, 0); /* Enable pitch & controller */ - } - return 0; -} - -static void mpu_synth_close(int dev) -{ - int midi_dev; - struct mpu_config *devc; - struct coproc_operations *coprocessor; - - midi_dev = synth_devs[dev]->midi_dev; - - devc = &dev_conf[midi_dev]; - mpu_cmd(midi_dev, 0x15, 0); /* Stop recording, playback and MIDI */ - mpu_cmd(midi_dev, 0x8a, 0); /* Disable data in stopped mode */ - - devc->inputintr = NULL; - - coprocessor = midi_devs[midi_dev]->coproc; - if (coprocessor) { - coprocessor->close(coprocessor->devc, COPR_MIDI); - module_put(coprocessor->owner); - } - devc->opened = 0; - devc->mode = 0; -} - -#define MIDI_SYNTH_NAME "MPU-401 UART Midi" -#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT -#include "midi_synth.h" - -static struct synth_operations mpu401_synth_proto = -{ - .owner = THIS_MODULE, - .id = "MPU401", - .info = NULL, - .midi_dev = 0, - .synth_type = SYNTH_TYPE_MIDI, - .synth_subtype = 0, - .open = mpu_synth_open, - .close = mpu_synth_close, - .ioctl = mpu_synth_ioctl, - .kill_note = midi_synth_kill_note, - .start_note = midi_synth_start_note, - .set_instr = midi_synth_set_instr, - .reset = midi_synth_reset, - .hw_control = midi_synth_hw_control, - .load_patch = midi_synth_load_patch, - .aftertouch = midi_synth_aftertouch, - .controller = midi_synth_controller, - .panning = midi_synth_panning, - .bender = midi_synth_bender, - .setup_voice = midi_synth_setup_voice, - .send_sysex = midi_synth_send_sysex -}; - -static struct synth_operations *mpu401_synth_operations[MAX_MIDI_DEV]; - -static struct midi_operations mpu401_midi_proto = -{ - .owner = THIS_MODULE, - .info = {"MPU-401 Midi", 0, MIDI_CAP_MPU401, SNDCARD_MPU401}, - .in_info = {0}, - .open = mpu401_open, - .close = mpu401_close, - .ioctl = mpu401_ioctl, - .outputc = mpu401_out, - .start_read = mpu401_start_read, - .end_read = mpu401_end_read, - .kick = mpu401_kick, - .buffer_status = mpu401_buffer_status, - .prefix_cmd = mpu401_prefix_cmd -}; - -static struct midi_operations mpu401_midi_operations[MAX_MIDI_DEV]; - -static void mpu401_chk_version(int n, struct mpu_config *devc) -{ - int tmp; - - devc->version = devc->revision = 0; - - tmp = mpu_cmd(n, 0xAC, 0); - if (tmp < 0) - return; - if ((tmp & 0xf0) > 0x20) /* Why it's larger than 2.x ??? */ - return; - devc->version = tmp; - - if ((tmp = mpu_cmd(n, 0xAD, 0)) < 0) { - devc->version = 0; - return; - } - devc->revision = tmp; -} - -int attach_mpu401(struct address_info *hw_config, struct module *owner) -{ - unsigned long flags; - char revision_char; - - int m, ret; - struct mpu_config *devc; - - hw_config->slots[1] = -1; - m = sound_alloc_mididev(); - if (m == -1) - { - printk(KERN_WARNING "MPU-401: Too many midi devices detected\n"); - ret = -ENOMEM; - goto out_err; - } - devc = &dev_conf[m]; - devc->base = hw_config->io_base; - devc->osp = hw_config->osp; - devc->irq = hw_config->irq; - devc->opened = 0; - devc->uart_mode = 0; - devc->initialized = 0; - devc->version = 0; - devc->revision = 0; - devc->capabilities = 0; - devc->timer_flag = 0; - devc->m_busy = 0; - devc->m_state = ST_INIT; - devc->shared_irq = hw_config->always_detect; - spin_lock_init(&devc->lock); - - if (devc->irq < 0) - { - devc->irq *= -1; - devc->shared_irq = 1; - } - - if (!hw_config->always_detect) - { - /* Verify the hardware again */ - if (!reset_mpu401(devc)) - { - printk(KERN_WARNING "mpu401: Device didn't respond\n"); - ret = -ENODEV; - goto out_mididev; - } - if (!devc->shared_irq) - { - if (request_irq(devc->irq, mpuintr, 0, "mpu401", - hw_config) < 0) - { - printk(KERN_WARNING "mpu401: Failed to allocate IRQ%d\n", devc->irq); - ret = -ENOMEM; - goto out_mididev; - } - } - spin_lock_irqsave(&devc->lock,flags); - mpu401_chk_version(m, devc); - if (devc->version == 0) - mpu401_chk_version(m, devc); - spin_unlock_irqrestore(&devc->lock, flags); - } - - if (devc->version != 0) - if (mpu_cmd(m, 0xC5, 0) >= 0) /* Set timebase OK */ - if (mpu_cmd(m, 0xE0, 120) >= 0) /* Set tempo OK */ - devc->capabilities |= MPU_CAP_INTLG; /* Supports intelligent mode */ - - - mpu401_synth_operations[m] = kmalloc(sizeof(struct synth_operations), GFP_KERNEL); - - if (mpu401_synth_operations[m] == NULL) - { - printk(KERN_ERR "mpu401: Can't allocate memory\n"); - ret = -ENOMEM; - goto out_irq; - } - if (!(devc->capabilities & MPU_CAP_INTLG)) /* No intelligent mode */ - { - memcpy((char *) mpu401_synth_operations[m], - (char *) &std_midi_synth, - sizeof(struct synth_operations)); - } - else - { - memcpy((char *) mpu401_synth_operations[m], - (char *) &mpu401_synth_proto, - sizeof(struct synth_operations)); - } - if (owner) - mpu401_synth_operations[m]->owner = owner; - - memcpy((char *) &mpu401_midi_operations[m], - (char *) &mpu401_midi_proto, - sizeof(struct midi_operations)); - - mpu401_midi_operations[m].converter = mpu401_synth_operations[m]; - - memcpy((char *) &mpu_synth_info[m], - (char *) &mpu_synth_info_proto, - sizeof(struct synth_info)); - - n_mpu_devs++; - - if (devc->version == 0x20 && devc->revision >= 0x07) /* MusicQuest interface */ - { - int ports = (devc->revision & 0x08) ? 32 : 16; - - devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_SMPTE | - MPU_CAP_CLS | MPU_CAP_2PORT; - - revision_char = (devc->revision == 0x7f) ? 'M' : ' '; - sprintf(mpu_synth_info[m].name, "MQX-%d%c MIDI Interface #%d", - ports, - revision_char, - n_mpu_devs); - } - else - { - revision_char = devc->revision ? devc->revision + '@' : ' '; - if ((int) devc->revision > ('Z' - '@')) - revision_char = '+'; - - devc->capabilities |= MPU_CAP_SYNC | MPU_CAP_FSK; - - if (hw_config->name) - sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name); - else - sprintf(mpu_synth_info[m].name, - "MPU-401 %d.%d%c MIDI #%d", - (int) (devc->version & 0xf0) >> 4, - devc->version & 0x0f, - revision_char, - n_mpu_devs); - } - - strcpy(mpu401_midi_operations[m].info.name, - mpu_synth_info[m].name); - - conf_printf(mpu_synth_info[m].name, hw_config); - - mpu401_synth_operations[m]->midi_dev = devc->devno = m; - mpu401_synth_operations[devc->devno]->info = &mpu_synth_info[devc->devno]; - - if (devc->capabilities & MPU_CAP_INTLG) /* Intelligent mode */ - hw_config->slots[2] = mpu_timer_init(m); - - midi_devs[m] = &mpu401_midi_operations[devc->devno]; - - if (owner) - midi_devs[m]->owner = owner; - - hw_config->slots[1] = m; - sequencer_init(); - - return 0; - -out_irq: - free_irq(devc->irq, hw_config); -out_mididev: - sound_unload_mididev(m); -out_err: - release_region(hw_config->io_base, 2); - return ret; -} - -static int reset_mpu401(struct mpu_config *devc) -{ - unsigned long flags; - int ok, timeout, n; - int timeout_limit; - - /* - * Send the RESET command. Try again if no success at the first time. - * (If the device is in the UART mode, it will not ack the reset cmd). - */ - - ok = 0; - - timeout_limit = devc->initialized ? 30000 : 100000; - devc->initialized = 1; - - for (n = 0; n < 2 && !ok; n++) - { - for (timeout = timeout_limit; timeout > 0 && !ok; timeout--) - ok = output_ready(devc); - - write_command(devc, MPU_RESET); /* - * Send MPU-401 RESET Command - */ - - /* - * Wait at least 25 msec. This method is not accurate so let's make the - * loop bit longer. Cannot sleep since this is called during boot. - */ - - for (timeout = timeout_limit * 2; timeout > 0 && !ok; timeout--) - { - spin_lock_irqsave(&devc->lock,flags); - if (input_avail(devc)) - if (read_data(devc) == MPU_ACK) - ok = 1; - spin_unlock_irqrestore(&devc->lock,flags); - } - - } - - devc->m_state = ST_INIT; - devc->m_ptr = 0; - devc->m_left = 0; - devc->last_status = 0; - devc->uart_mode = 0; - - return ok; -} - -static void set_uart_mode(int dev, struct mpu_config *devc, int arg) -{ - if (!arg && (devc->capabilities & MPU_CAP_INTLG)) - return; - if ((devc->uart_mode == 0) == (arg == 0)) - return; /* Already set */ - reset_mpu401(devc); /* This exits the uart mode */ - - if (arg) - { - if (mpu_cmd(dev, UART_MODE_ON, 0) < 0) - { - printk(KERN_ERR "mpu401: Can't enter UART mode\n"); - devc->uart_mode = 0; - return; - } - } - devc->uart_mode = arg; - -} - -int probe_mpu401(struct address_info *hw_config, struct resource *ports) -{ - int ok = 0; - struct mpu_config tmp_devc; - - tmp_devc.base = hw_config->io_base; - tmp_devc.irq = hw_config->irq; - tmp_devc.initialized = 0; - tmp_devc.opened = 0; - tmp_devc.osp = hw_config->osp; - - if (hw_config->always_detect) - return 1; - - if (inb(hw_config->io_base + 1) == 0xff) - { - DDB(printk("MPU401: Port %x looks dead.\n", hw_config->io_base)); - return 0; /* Just bus float? */ - } - ok = reset_mpu401(&tmp_devc); - - if (!ok) - { - DDB(printk("MPU401: Reset failed on port %x\n", hw_config->io_base)); - } - return ok; -} - -void unload_mpu401(struct address_info *hw_config) -{ - void *p; - int n=hw_config->slots[1]; - - if (n != -1) { - release_region(hw_config->io_base, 2); - if (hw_config->always_detect == 0 && hw_config->irq > 0) - free_irq(hw_config->irq, hw_config); - p=mpu401_synth_operations[n]; - sound_unload_mididev(n); - sound_unload_timerdev(hw_config->slots[2]); - kfree(p); - } -} - -/***************************************************** - * Timer stuff - ****************************************************/ - -static volatile int timer_initialized = 0, timer_open = 0, tmr_running = 0; -static volatile int curr_tempo, curr_timebase, hw_timebase; -static int max_timebase = 8; /* 8*24=192 ppqn */ -static volatile unsigned long next_event_time; -static volatile unsigned long curr_ticks, curr_clocks; -static unsigned long prev_event_time; -static int metronome_mode; - -static unsigned long clocks2ticks(unsigned long clocks) -{ - /* - * The MPU-401 supports just a limited set of possible timebase values. - * Since the applications require more choices, the driver has to - * program the HW to do its best and to convert between the HW and - * actual timebases. - */ - return ((clocks * curr_timebase) + (hw_timebase / 2)) / hw_timebase; -} - -static void set_timebase(int midi_dev, int val) -{ - int hw_val; - - if (val < 48) - val = 48; - if (val > 1000) - val = 1000; - - hw_val = val; - hw_val = (hw_val + 12) / 24; - if (hw_val > max_timebase) - hw_val = max_timebase; - - if (mpu_cmd(midi_dev, 0xC0 | (hw_val & 0x0f), 0) < 0) - { - printk(KERN_WARNING "mpu401: Can't set HW timebase to %d\n", hw_val * 24); - return; - } - hw_timebase = hw_val * 24; - curr_timebase = val; - -} - -static void tmr_reset(struct mpu_config *devc) -{ - unsigned long flags; - - spin_lock_irqsave(&devc->lock,flags); - next_event_time = (unsigned long) -1; - prev_event_time = 0; - curr_ticks = curr_clocks = 0; - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void set_timer_mode(int midi_dev) -{ - if (timer_mode & TMR_MODE_CLS) - mpu_cmd(midi_dev, 0x3c, 0); /* Use CLS sync */ - else if (timer_mode & TMR_MODE_SMPTE) - mpu_cmd(midi_dev, 0x3d, 0); /* Use SMPTE sync */ - - if (timer_mode & TMR_INTERNAL) - { - mpu_cmd(midi_dev, 0x80, 0); /* Use MIDI sync */ - } - else - { - if (timer_mode & (TMR_MODE_MIDI | TMR_MODE_CLS)) - { - mpu_cmd(midi_dev, 0x82, 0); /* Use MIDI sync */ - mpu_cmd(midi_dev, 0x91, 0); /* Enable ext MIDI ctrl */ - } - else if (timer_mode & TMR_MODE_FSK) - mpu_cmd(midi_dev, 0x81, 0); /* Use FSK sync */ - } -} - -static void stop_metronome(int midi_dev) -{ - mpu_cmd(midi_dev, 0x84, 0); /* Disable metronome */ -} - -static void setup_metronome(int midi_dev) -{ - int numerator, denominator; - int clks_per_click, num_32nds_per_beat; - int beats_per_measure; - - numerator = ((unsigned) metronome_mode >> 24) & 0xff; - denominator = ((unsigned) metronome_mode >> 16) & 0xff; - clks_per_click = ((unsigned) metronome_mode >> 8) & 0xff; - num_32nds_per_beat = (unsigned) metronome_mode & 0xff; - beats_per_measure = (numerator * 4) >> denominator; - - if (!metronome_mode) - mpu_cmd(midi_dev, 0x84, 0); /* Disable metronome */ - else - { - mpu_cmd(midi_dev, 0xE4, clks_per_click); - mpu_cmd(midi_dev, 0xE6, beats_per_measure); - mpu_cmd(midi_dev, 0x83, 0); /* Enable metronome without accents */ - } -} - -static int mpu_start_timer(int midi_dev) -{ - struct mpu_config *devc= &dev_conf[midi_dev]; - - tmr_reset(devc); - set_timer_mode(midi_dev); - - if (tmr_running) - return TIMER_NOT_ARMED; /* Already running */ - - if (timer_mode & TMR_INTERNAL) - { - mpu_cmd(midi_dev, 0x02, 0); /* Send MIDI start */ - tmr_running = 1; - return TIMER_NOT_ARMED; - } - else - { - mpu_cmd(midi_dev, 0x35, 0); /* Enable mode messages to PC */ - mpu_cmd(midi_dev, 0x38, 0); /* Enable sys common messages to PC */ - mpu_cmd(midi_dev, 0x39, 0); /* Enable real time messages to PC */ - mpu_cmd(midi_dev, 0x97, 0); /* Enable system exclusive messages to PC */ - } - return TIMER_ARMED; -} - -static int mpu_timer_open(int dev, int mode) -{ - int midi_dev = sound_timer_devs[dev]->devlink; - struct mpu_config *devc= &dev_conf[midi_dev]; - - if (timer_open) - return -EBUSY; - - tmr_reset(devc); - curr_tempo = 50; - mpu_cmd(midi_dev, 0xE0, 50); - curr_timebase = hw_timebase = 120; - set_timebase(midi_dev, 120); - timer_open = 1; - metronome_mode = 0; - set_timer_mode(midi_dev); - - mpu_cmd(midi_dev, 0xe7, 0x04); /* Send all clocks to host */ - mpu_cmd(midi_dev, 0x95, 0); /* Enable clock to host */ - - return 0; -} - -static void mpu_timer_close(int dev) -{ - int midi_dev = sound_timer_devs[dev]->devlink; - - timer_open = tmr_running = 0; - mpu_cmd(midi_dev, 0x15, 0); /* Stop all */ - mpu_cmd(midi_dev, 0x94, 0); /* Disable clock to host */ - mpu_cmd(midi_dev, 0x8c, 0); /* Disable measure end messages to host */ - stop_metronome(midi_dev); -} - -static int mpu_timer_event(int dev, unsigned char *event) -{ - unsigned char command = event[1]; - unsigned long parm = *(unsigned int *) &event[4]; - int midi_dev = sound_timer_devs[dev]->devlink; - - switch (command) - { - case TMR_WAIT_REL: - parm += prev_event_time; - case TMR_WAIT_ABS: - if (parm > 0) - { - long time; - - if (parm <= curr_ticks) /* It's the time */ - return TIMER_NOT_ARMED; - time = parm; - next_event_time = prev_event_time = time; - - return TIMER_ARMED; - } - break; - - case TMR_START: - if (tmr_running) - break; - return mpu_start_timer(midi_dev); - - case TMR_STOP: - mpu_cmd(midi_dev, 0x01, 0); /* Send MIDI stop */ - stop_metronome(midi_dev); - tmr_running = 0; - break; - - case TMR_CONTINUE: - if (tmr_running) - break; - mpu_cmd(midi_dev, 0x03, 0); /* Send MIDI continue */ - setup_metronome(midi_dev); - tmr_running = 1; - break; - - case TMR_TEMPO: - if (parm) - { - if (parm < 8) - parm = 8; - if (parm > 250) - parm = 250; - if (mpu_cmd(midi_dev, 0xE0, parm) < 0) - printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) parm); - curr_tempo = parm; - } - break; - - case TMR_ECHO: - seq_copy_to_input(event, 8); - break; - - case TMR_TIMESIG: - if (metronome_mode) /* Metronome enabled */ - { - metronome_mode = parm; - setup_metronome(midi_dev); - } - break; - - default:; - } - return TIMER_NOT_ARMED; -} - -static unsigned long mpu_timer_get_time(int dev) -{ - if (!timer_open) - return 0; - - return curr_ticks; -} - -static int mpu_timer_ioctl(int dev, unsigned int command, void __user *arg) -{ - int midi_dev = sound_timer_devs[dev]->devlink; - int __user *p = (int __user *)arg; - - switch (command) - { - case SNDCTL_TMR_SOURCE: - { - int parm; - - if (get_user(parm, p)) - return -EFAULT; - parm &= timer_caps; - - if (parm != 0) - { - timer_mode = parm; - - if (timer_mode & TMR_MODE_CLS) - mpu_cmd(midi_dev, 0x3c, 0); /* Use CLS sync */ - else if (timer_mode & TMR_MODE_SMPTE) - mpu_cmd(midi_dev, 0x3d, 0); /* Use SMPTE sync */ - } - if (put_user(timer_mode, p)) - return -EFAULT; - return timer_mode; - } - break; - - case SNDCTL_TMR_START: - mpu_start_timer(midi_dev); - return 0; - - case SNDCTL_TMR_STOP: - tmr_running = 0; - mpu_cmd(midi_dev, 0x01, 0); /* Send MIDI stop */ - stop_metronome(midi_dev); - return 0; - - case SNDCTL_TMR_CONTINUE: - if (tmr_running) - return 0; - tmr_running = 1; - mpu_cmd(midi_dev, 0x03, 0); /* Send MIDI continue */ - return 0; - - case SNDCTL_TMR_TIMEBASE: - { - int val; - if (get_user(val, p)) - return -EFAULT; - if (val) - set_timebase(midi_dev, val); - if (put_user(curr_timebase, p)) - return -EFAULT; - return curr_timebase; - } - break; - - case SNDCTL_TMR_TEMPO: - { - int val; - int ret; - - if (get_user(val, p)) - return -EFAULT; - - if (val) - { - if (val < 8) - val = 8; - if (val > 250) - val = 250; - if ((ret = mpu_cmd(midi_dev, 0xE0, val)) < 0) - { - printk(KERN_WARNING "mpu401: Can't set tempo to %d\n", (int) val); - return ret; - } - curr_tempo = val; - } - if (put_user(curr_tempo, p)) - return -EFAULT; - return curr_tempo; - } - break; - - case SNDCTL_SEQ_CTRLRATE: - { - int val; - if (get_user(val, p)) - return -EFAULT; - - if (val != 0) /* Can't change */ - return -EINVAL; - val = ((curr_tempo * curr_timebase) + 30)/60; - if (put_user(val, p)) - return -EFAULT; - return val; - } - break; - - case SNDCTL_SEQ_GETTIME: - if (put_user(curr_ticks, p)) - return -EFAULT; - return curr_ticks; - - case SNDCTL_TMR_METRONOME: - if (get_user(metronome_mode, p)) - return -EFAULT; - setup_metronome(midi_dev); - return 0; - - default:; - } - return -EINVAL; -} - -static void mpu_timer_arm(int dev, long time) -{ - if (time < 0) - time = curr_ticks + 1; - else if (time <= curr_ticks) /* It's the time */ - return; - next_event_time = prev_event_time = time; - return; -} - -static struct sound_timer_operations mpu_timer = -{ - .owner = THIS_MODULE, - .info = {"MPU-401 Timer", 0}, - .priority = 10, /* Priority */ - .devlink = 0, /* Local device link */ - .open = mpu_timer_open, - .close = mpu_timer_close, - .event = mpu_timer_event, - .get_time = mpu_timer_get_time, - .ioctl = mpu_timer_ioctl, - .arm_timer = mpu_timer_arm -}; - -static void mpu_timer_interrupt(void) -{ - if (!timer_open) - return; - - if (!tmr_running) - return; - - curr_clocks++; - curr_ticks = clocks2ticks(curr_clocks); - - if (curr_ticks >= next_event_time) - { - next_event_time = (unsigned long) -1; - sequencer_timer(0); - } -} - -static void timer_ext_event(struct mpu_config *devc, int event, int parm) -{ - int midi_dev = devc->devno; - - if (!devc->timer_flag) - return; - - switch (event) - { - case TMR_CLOCK: - printk("<MIDI clk>"); - break; - - case TMR_START: - printk("Ext MIDI start\n"); - if (!tmr_running) - { - if (timer_mode & TMR_EXTERNAL) - { - tmr_running = 1; - setup_metronome(midi_dev); - next_event_time = 0; - STORE(SEQ_START_TIMER()); - } - } - break; - - case TMR_STOP: - printk("Ext MIDI stop\n"); - if (timer_mode & TMR_EXTERNAL) - { - tmr_running = 0; - stop_metronome(midi_dev); - STORE(SEQ_STOP_TIMER()); - } - break; - - case TMR_CONTINUE: - printk("Ext MIDI continue\n"); - if (timer_mode & TMR_EXTERNAL) - { - tmr_running = 1; - setup_metronome(midi_dev); - STORE(SEQ_CONTINUE_TIMER()); - } - break; - - case TMR_SPP: - printk("Songpos: %d\n", parm); - if (timer_mode & TMR_EXTERNAL) - { - STORE(SEQ_SONGPOS(parm)); - } - break; - } -} - -static int mpu_timer_init(int midi_dev) -{ - struct mpu_config *devc; - int n; - - devc = &dev_conf[midi_dev]; - - if (timer_initialized) - return -1; /* There is already a similar timer */ - - timer_initialized = 1; - - mpu_timer.devlink = midi_dev; - dev_conf[midi_dev].timer_flag = 1; - - n = sound_alloc_timerdev(); - if (n == -1) - n = 0; - sound_timer_devs[n] = &mpu_timer; - - if (devc->version < 0x20) /* Original MPU-401 */ - timer_caps = TMR_INTERNAL | TMR_EXTERNAL | TMR_MODE_FSK | TMR_MODE_MIDI; - else - { - /* - * The version number 2.0 is used (at least) by the - * MusicQuest cards and the Roland Super-MPU. - * - * MusicQuest has given a special meaning to the bits of the - * revision number. The Super-MPU returns 0. - */ - - if (devc->revision) - timer_caps |= TMR_EXTERNAL | TMR_MODE_MIDI; - - if (devc->revision & 0x02) - timer_caps |= TMR_MODE_CLS; - - - if (devc->revision & 0x40) - max_timebase = 10; /* Has the 216 and 240 ppqn modes */ - } - - timer_mode = (TMR_INTERNAL | TMR_MODE_MIDI) & timer_caps; - return n; - -} - -EXPORT_SYMBOL(probe_mpu401); -EXPORT_SYMBOL(attach_mpu401); -EXPORT_SYMBOL(unload_mpu401); - -static struct address_info cfg; - -static int io = -1; -static int irq = -1; - -module_param_hw(irq, int, irq, 0); -module_param_hw(io, int, ioport, 0); - -static int __init init_mpu401(void) -{ - int ret; - /* Can be loaded either for module use or to provide functions - to others */ - if (io != -1 && irq != -1) { - struct resource *ports; - cfg.irq = irq; - cfg.io_base = io; - ports = request_region(io, 2, "mpu401"); - if (!ports) - return -EBUSY; - if (probe_mpu401(&cfg, ports) == 0) { - release_region(io, 2); - return -ENODEV; - } - if ((ret = attach_mpu401(&cfg, THIS_MODULE))) - return ret; - } - - return 0; -} - -static void __exit cleanup_mpu401(void) -{ - if (io != -1 && irq != -1) { - /* Check for use by, for example, sscape driver */ - unload_mpu401(&cfg); - } -} - -module_init(init_mpu401); -module_exit(cleanup_mpu401); - -#ifndef MODULE -static int __init setup_mpu401(char *str) -{ - /* io, irq */ - int ints[3]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - - return 1; -} - -__setup("mpu401=", setup_mpu401); -#endif -MODULE_LICENSE("GPL"); diff --git a/sound/oss/mpu401.h b/sound/oss/mpu401.h deleted file mode 100644 index 0ad1e9ee74f7..000000000000 --- a/sound/oss/mpu401.h +++ /dev/null @@ -1,11 +0,0 @@ - -/* From uart401.c */ -int probe_uart401 (struct address_info *hw_config, struct module *owner); -void unload_uart401 (struct address_info *hw_config); - -irqreturn_t uart401intr (int irq, void *dev_id); - -/* From mpu401.c */ -int probe_mpu401(struct address_info *hw_config, struct resource *ports); -int attach_mpu401(struct address_info * hw_config, struct module *owner); -void unload_mpu401(struct address_info *hw_info); diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c deleted file mode 100644 index b63010ad22f1..000000000000 --- a/sound/oss/msnd.c +++ /dev/null @@ -1,413 +0,0 @@ -/********************************************************************* - * - * msnd.c - Driver Base - * - * Turtle Beach MultiSound Sound Card Driver for Linux - * - * Copyright (C) 1998 Andrew Veliath - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - ********************************************************************/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/vmalloc.h> -#include <linux/types.h> -#include <linux/delay.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/io.h> -#include <linux/uaccess.h> -#include <linux/spinlock.h> -#include <asm/irq.h> -#include "msnd.h" - -#define LOGNAME "msnd" - -#define MSND_MAX_DEVS 4 - -static multisound_dev_t *devs[MSND_MAX_DEVS]; -static int num_devs; - -int msnd_register(multisound_dev_t *dev) -{ - int i; - - for (i = 0; i < MSND_MAX_DEVS; ++i) - if (devs[i] == NULL) - break; - - if (i == MSND_MAX_DEVS) - return -ENOMEM; - - devs[i] = dev; - ++num_devs; - return 0; -} - -void msnd_unregister(multisound_dev_t *dev) -{ - int i; - - for (i = 0; i < MSND_MAX_DEVS; ++i) - if (devs[i] == dev) - break; - - if (i == MSND_MAX_DEVS) { - printk(KERN_WARNING LOGNAME ": Unregistering unknown device\n"); - return; - } - - devs[i] = NULL; - --num_devs; -} - -void msnd_init_queue(void __iomem *base, int start, int size) -{ - writew(PCTODSP_BASED(start), base + JQS_wStart); - writew(PCTODSP_OFFSET(size) - 1, base + JQS_wSize); - writew(0, base + JQS_wHead); - writew(0, base + JQS_wTail); -} - -void msnd_fifo_init(msnd_fifo *f) -{ - f->data = NULL; -} - -void msnd_fifo_free(msnd_fifo *f) -{ - vfree(f->data); - f->data = NULL; -} - -int msnd_fifo_alloc(msnd_fifo *f, size_t n) -{ - msnd_fifo_free(f); - f->data = vmalloc(n); - f->n = n; - f->tail = 0; - f->head = 0; - f->len = 0; - - if (!f->data) - return -ENOMEM; - - return 0; -} - -void msnd_fifo_make_empty(msnd_fifo *f) -{ - f->len = f->tail = f->head = 0; -} - -int msnd_fifo_write_io(msnd_fifo *f, char __iomem *buf, size_t len) -{ - int count = 0; - - while ((count < len) && (f->len != f->n)) { - - int nwritten; - - if (f->head <= f->tail) { - nwritten = len - count; - if (nwritten > f->n - f->tail) - nwritten = f->n - f->tail; - } - else { - nwritten = f->head - f->tail; - if (nwritten > len - count) - nwritten = len - count; - } - - memcpy_fromio(f->data + f->tail, buf, nwritten); - - count += nwritten; - buf += nwritten; - f->len += nwritten; - f->tail += nwritten; - f->tail %= f->n; - } - - return count; -} - -int msnd_fifo_write(msnd_fifo *f, const char *buf, size_t len) -{ - int count = 0; - - while ((count < len) && (f->len != f->n)) { - - int nwritten; - - if (f->head <= f->tail) { - nwritten = len - count; - if (nwritten > f->n - f->tail) - nwritten = f->n - f->tail; - } - else { - nwritten = f->head - f->tail; - if (nwritten > len - count) - nwritten = len - count; - } - - memcpy(f->data + f->tail, buf, nwritten); - - count += nwritten; - buf += nwritten; - f->len += nwritten; - f->tail += nwritten; - f->tail %= f->n; - } - - return count; -} - -int msnd_fifo_read_io(msnd_fifo *f, char __iomem *buf, size_t len) -{ - int count = 0; - - while ((count < len) && (f->len > 0)) { - - int nread; - - if (f->tail <= f->head) { - nread = len - count; - if (nread > f->n - f->head) - nread = f->n - f->head; - } - else { - nread = f->tail - f->head; - if (nread > len - count) - nread = len - count; - } - - memcpy_toio(buf, f->data + f->head, nread); - - count += nread; - buf += nread; - f->len -= nread; - f->head += nread; - f->head %= f->n; - } - - return count; -} - -int msnd_fifo_read(msnd_fifo *f, char *buf, size_t len) -{ - int count = 0; - - while ((count < len) && (f->len > 0)) { - - int nread; - - if (f->tail <= f->head) { - nread = len - count; - if (nread > f->n - f->head) - nread = f->n - f->head; - } - else { - nread = f->tail - f->head; - if (nread > len - count) - nread = len - count; - } - - memcpy(buf, f->data + f->head, nread); - - count += nread; - buf += nread; - f->len -= nread; - f->head += nread; - f->head %= f->n; - } - - return count; -} - -static int msnd_wait_TXDE(multisound_dev_t *dev) -{ - register unsigned int io = dev->io; - register int timeout = 1000; - - while(timeout-- > 0) - if (msnd_inb(io + HP_ISR) & HPISR_TXDE) - return 0; - - return -EIO; -} - -static int msnd_wait_HC0(multisound_dev_t *dev) -{ - register unsigned int io = dev->io; - register int timeout = 1000; - - while(timeout-- > 0) - if (!(msnd_inb(io + HP_CVR) & HPCVR_HC)) - return 0; - - return -EIO; -} - -int msnd_send_dsp_cmd(multisound_dev_t *dev, BYTE cmd) -{ - unsigned long flags; - - spin_lock_irqsave(&dev->lock, flags); - if (msnd_wait_HC0(dev) == 0) { - msnd_outb(cmd, dev->io + HP_CVR); - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - } - spin_unlock_irqrestore(&dev->lock, flags); - - printk(KERN_DEBUG LOGNAME ": Send DSP command timeout\n"); - - return -EIO; -} - -int msnd_send_word(multisound_dev_t *dev, unsigned char high, - unsigned char mid, unsigned char low) -{ - register unsigned int io = dev->io; - - if (msnd_wait_TXDE(dev) == 0) { - msnd_outb(high, io + HP_TXH); - msnd_outb(mid, io + HP_TXM); - msnd_outb(low, io + HP_TXL); - return 0; - } - - printk(KERN_DEBUG LOGNAME ": Send host word timeout\n"); - - return -EIO; -} - -int msnd_upload_host(multisound_dev_t *dev, char *bin, int len) -{ - int i; - - if (len % 3 != 0) { - printk(KERN_WARNING LOGNAME ": Upload host data not multiple of 3!\n"); - return -EINVAL; - } - - for (i = 0; i < len; i += 3) - if (msnd_send_word(dev, bin[i], bin[i + 1], bin[i + 2]) != 0) - return -EIO; - - msnd_inb(dev->io + HP_RXL); - msnd_inb(dev->io + HP_CVR); - - return 0; -} - -int msnd_enable_irq(multisound_dev_t *dev) -{ - unsigned long flags; - - if (dev->irq_ref++) - return 0; - - printk(KERN_DEBUG LOGNAME ": Enabling IRQ\n"); - - spin_lock_irqsave(&dev->lock, flags); - if (msnd_wait_TXDE(dev) == 0) { - msnd_outb(msnd_inb(dev->io + HP_ICR) | HPICR_TREQ, dev->io + HP_ICR); - if (dev->type == msndClassic) - msnd_outb(dev->irqid, dev->io + HP_IRQM); - msnd_outb(msnd_inb(dev->io + HP_ICR) & ~HPICR_TREQ, dev->io + HP_ICR); - msnd_outb(msnd_inb(dev->io + HP_ICR) | HPICR_RREQ, dev->io + HP_ICR); - enable_irq(dev->irq); - msnd_init_queue(dev->DSPQ, dev->dspq_data_buff, dev->dspq_buff_size); - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - } - spin_unlock_irqrestore(&dev->lock, flags); - - printk(KERN_DEBUG LOGNAME ": Enable IRQ failed\n"); - - return -EIO; -} - -int msnd_disable_irq(multisound_dev_t *dev) -{ - unsigned long flags; - - if (--dev->irq_ref > 0) - return 0; - - if (dev->irq_ref < 0) - printk(KERN_DEBUG LOGNAME ": IRQ ref count is %d\n", dev->irq_ref); - - printk(KERN_DEBUG LOGNAME ": Disabling IRQ\n"); - - spin_lock_irqsave(&dev->lock, flags); - if (msnd_wait_TXDE(dev) == 0) { - msnd_outb(msnd_inb(dev->io + HP_ICR) & ~HPICR_RREQ, dev->io + HP_ICR); - if (dev->type == msndClassic) - msnd_outb(HPIRQ_NONE, dev->io + HP_IRQM); - disable_irq(dev->irq); - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - } - spin_unlock_irqrestore(&dev->lock, flags); - - printk(KERN_DEBUG LOGNAME ": Disable IRQ failed\n"); - - return -EIO; -} - -#ifndef LINUX20 -EXPORT_SYMBOL(msnd_register); -EXPORT_SYMBOL(msnd_unregister); - -EXPORT_SYMBOL(msnd_init_queue); - -EXPORT_SYMBOL(msnd_fifo_init); -EXPORT_SYMBOL(msnd_fifo_free); -EXPORT_SYMBOL(msnd_fifo_alloc); -EXPORT_SYMBOL(msnd_fifo_make_empty); -EXPORT_SYMBOL(msnd_fifo_write_io); -EXPORT_SYMBOL(msnd_fifo_read_io); -EXPORT_SYMBOL(msnd_fifo_write); -EXPORT_SYMBOL(msnd_fifo_read); - -EXPORT_SYMBOL(msnd_send_dsp_cmd); -EXPORT_SYMBOL(msnd_send_word); -EXPORT_SYMBOL(msnd_upload_host); - -EXPORT_SYMBOL(msnd_enable_irq); -EXPORT_SYMBOL(msnd_disable_irq); -#endif - -#ifdef MODULE -MODULE_AUTHOR ("Andrew Veliath <andrewtv@usa.net>"); -MODULE_DESCRIPTION ("Turtle Beach MultiSound Driver Base"); -MODULE_LICENSE("GPL"); - - -int init_module(void) -{ - return 0; -} - -void cleanup_module(void) -{ -} -#endif diff --git a/sound/oss/msnd.h b/sound/oss/msnd.h deleted file mode 100644 index c8be47ec2b7e..000000000000 --- a/sound/oss/msnd.h +++ /dev/null @@ -1,278 +0,0 @@ -/********************************************************************* - * - * msnd.h - * - * Turtle Beach MultiSound Sound Card Driver for Linux - * - * Some parts of this header file were derived from the Turtle Beach - * MultiSound Driver Development Kit. - * - * Copyright (C) 1998 Andrew Veliath - * Copyright (C) 1993 Turtle Beach Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - ********************************************************************/ -#ifndef __MSND_H -#define __MSND_H - -#define VERSION "0.8.3.1" - -#define DEFSAMPLERATE DSP_DEFAULT_SPEED -#define DEFSAMPLESIZE AFMT_U8 -#define DEFCHANNELS 1 - -#define DEFFIFOSIZE 128 - -#define SNDCARD_MSND 38 - -#define SRAM_BANK_SIZE 0x8000 -#define SRAM_CNTL_START 0x7F00 - -#define DSP_BASE_ADDR 0x4000 -#define DSP_BANK_BASE 0x4000 - -#define HP_ICR 0x00 -#define HP_CVR 0x01 -#define HP_ISR 0x02 -#define HP_IVR 0x03 -#define HP_NU 0x04 -#define HP_INFO 0x04 -#define HP_TXH 0x05 -#define HP_RXH 0x05 -#define HP_TXM 0x06 -#define HP_RXM 0x06 -#define HP_TXL 0x07 -#define HP_RXL 0x07 - -#define HP_ICR_DEF 0x00 -#define HP_CVR_DEF 0x12 -#define HP_ISR_DEF 0x06 -#define HP_IVR_DEF 0x0f -#define HP_NU_DEF 0x00 - -#define HP_IRQM 0x09 - -#define HPR_BLRC 0x08 -#define HPR_SPR1 0x09 -#define HPR_SPR2 0x0A -#define HPR_TCL0 0x0B -#define HPR_TCL1 0x0C -#define HPR_TCL2 0x0D -#define HPR_TCL3 0x0E -#define HPR_TCL4 0x0F - -#define HPICR_INIT 0x80 -#define HPICR_HM1 0x40 -#define HPICR_HM0 0x20 -#define HPICR_HF1 0x10 -#define HPICR_HF0 0x08 -#define HPICR_TREQ 0x02 -#define HPICR_RREQ 0x01 - -#define HPCVR_HC 0x80 - -#define HPISR_HREQ 0x80 -#define HPISR_DMA 0x40 -#define HPISR_HF3 0x10 -#define HPISR_HF2 0x08 -#define HPISR_TRDY 0x04 -#define HPISR_TXDE 0x02 -#define HPISR_RXDF 0x01 - -#define HPIO_290 0 -#define HPIO_260 1 -#define HPIO_250 2 -#define HPIO_240 3 -#define HPIO_230 4 -#define HPIO_220 5 -#define HPIO_210 6 -#define HPIO_3E0 7 - -#define HPMEM_NONE 0 -#define HPMEM_B000 1 -#define HPMEM_C800 2 -#define HPMEM_D000 3 -#define HPMEM_D400 4 -#define HPMEM_D800 5 -#define HPMEM_E000 6 -#define HPMEM_E800 7 - -#define HPIRQ_NONE 0 -#define HPIRQ_5 1 -#define HPIRQ_7 2 -#define HPIRQ_9 3 -#define HPIRQ_10 4 -#define HPIRQ_11 5 -#define HPIRQ_12 6 -#define HPIRQ_15 7 - -#define HIMT_PLAY_DONE 0x00 -#define HIMT_RECORD_DONE 0x01 -#define HIMT_MIDI_EOS 0x02 -#define HIMT_MIDI_OUT 0x03 - -#define HIMT_MIDI_IN_UCHAR 0x0E -#define HIMT_DSP 0x0F - -#define HDEX_BASE 0x92 -#define HDEX_PLAY_START (0 + HDEX_BASE) -#define HDEX_PLAY_STOP (1 + HDEX_BASE) -#define HDEX_PLAY_PAUSE (2 + HDEX_BASE) -#define HDEX_PLAY_RESUME (3 + HDEX_BASE) -#define HDEX_RECORD_START (4 + HDEX_BASE) -#define HDEX_RECORD_STOP (5 + HDEX_BASE) -#define HDEX_MIDI_IN_START (6 + HDEX_BASE) -#define HDEX_MIDI_IN_STOP (7 + HDEX_BASE) -#define HDEX_MIDI_OUT_START (8 + HDEX_BASE) -#define HDEX_MIDI_OUT_STOP (9 + HDEX_BASE) -#define HDEX_AUX_REQ (10 + HDEX_BASE) - -#define HIWORD(l) ((WORD)((((DWORD)(l)) >> 16) & 0xFFFF)) -#define LOWORD(l) ((WORD)(DWORD)(l)) -#define HIBYTE(w) ((BYTE)(((WORD)(w) >> 8) & 0xFF)) -#define LOBYTE(w) ((BYTE)(w)) -#define MAKELONG(low,hi) ((long)(((WORD)(low))|(((DWORD)((WORD)(hi)))<<16))) -#define MAKEWORD(low,hi) ((WORD)(((BYTE)(low))|(((WORD)((BYTE)(hi)))<<8))) - -#define PCTODSP_OFFSET(w) (USHORT)((w)/2) -#define PCTODSP_BASED(w) (USHORT)(((w)/2) + DSP_BASE_ADDR) -#define DSPTOPC_BASED(w) (((w) - DSP_BASE_ADDR) * 2) - -#ifdef SLOWIO -#define msnd_outb outb_p -#define msnd_inb inb_p -#else -#define msnd_outb outb -#define msnd_inb inb -#endif - -/* JobQueueStruct */ -#define JQS_wStart 0x00 -#define JQS_wSize 0x02 -#define JQS_wHead 0x04 -#define JQS_wTail 0x06 -#define JQS__size 0x08 - -/* DAQueueDataStruct */ -#define DAQDS_wStart 0x00 -#define DAQDS_wSize 0x02 -#define DAQDS_wFormat 0x04 -#define DAQDS_wSampleSize 0x06 -#define DAQDS_wChannels 0x08 -#define DAQDS_wSampleRate 0x0A -#define DAQDS_wIntMsg 0x0C -#define DAQDS_wFlags 0x0E -#define DAQDS__size 0x10 - -typedef u8 BYTE; -typedef u16 USHORT; -typedef u16 WORD; -typedef u32 DWORD; -typedef void __iomem * LPDAQD; - -/* Generic FIFO */ -typedef struct { - size_t n, len; - char *data; - int head, tail; -} msnd_fifo; - -typedef struct multisound_dev { - /* Linux device info */ - char *name; - int dsp_minor, mixer_minor; - int ext_midi_dev, hdr_midi_dev; - - /* Hardware resources */ - int io, numio; - int memid, irqid; - int irq, irq_ref; - unsigned char info; - void __iomem *base; - - /* Motorola 56k DSP SMA */ - void __iomem *SMA; - void __iomem *DAPQ, *DARQ, *MODQ, *MIDQ, *DSPQ; - void __iomem *pwDSPQData, *pwMIDQData, *pwMODQData; - int dspq_data_buff, dspq_buff_size; - - /* State variables */ - enum { msndClassic, msndPinnacle } type; - fmode_t mode; - unsigned long flags; -#define F_RESETTING 0 -#define F_HAVEDIGITAL 1 -#define F_AUDIO_WRITE_INUSE 2 -#define F_WRITING 3 -#define F_WRITEBLOCK 4 -#define F_WRITEFLUSH 5 -#define F_AUDIO_READ_INUSE 6 -#define F_READING 7 -#define F_READBLOCK 8 -#define F_EXT_MIDI_INUSE 9 -#define F_HDR_MIDI_INUSE 10 -#define F_DISABLE_WRITE_NDELAY 11 - wait_queue_head_t writeblock; - wait_queue_head_t readblock; - wait_queue_head_t writeflush; - spinlock_t lock; - int nresets; - unsigned long recsrc; - int left_levels[32]; - int right_levels[32]; - int mixer_mod_count; - int calibrate_signal; - int play_sample_size, play_sample_rate, play_channels; - int play_ndelay; - int rec_sample_size, rec_sample_rate, rec_channels; - int rec_ndelay; - BYTE bCurrentMidiPatch; - - /* Digital audio FIFOs */ - msnd_fifo DAPF, DARF; - int fifosize; - int last_playbank, last_recbank; - - /* MIDI in callback */ - void (*midi_in_interrupt)(struct multisound_dev *); -} multisound_dev_t; - -#ifndef mdelay -# define mdelay(a) udelay((a) * 1000) -#endif - -int msnd_register(multisound_dev_t *dev); -void msnd_unregister(multisound_dev_t *dev); - -void msnd_init_queue(void __iomem *, int start, int size); - -void msnd_fifo_init(msnd_fifo *f); -void msnd_fifo_free(msnd_fifo *f); -int msnd_fifo_alloc(msnd_fifo *f, size_t n); -void msnd_fifo_make_empty(msnd_fifo *f); -int msnd_fifo_write_io(msnd_fifo *f, char __iomem *buf, size_t len); -int msnd_fifo_read_io(msnd_fifo *f, char __iomem *buf, size_t len); -int msnd_fifo_write(msnd_fifo *f, const char *buf, size_t len); -int msnd_fifo_read(msnd_fifo *f, char *buf, size_t len); - -int msnd_send_dsp_cmd(multisound_dev_t *dev, BYTE cmd); -int msnd_send_word(multisound_dev_t *dev, unsigned char high, - unsigned char mid, unsigned char low); -int msnd_upload_host(multisound_dev_t *dev, char *bin, int len); -int msnd_enable_irq(multisound_dev_t *dev); -int msnd_disable_irq(multisound_dev_t *dev); - -#endif /* __MSND_H */ diff --git a/sound/oss/msnd_classic.c b/sound/oss/msnd_classic.c deleted file mode 100644 index 3b23a096fa4e..000000000000 --- a/sound/oss/msnd_classic.c +++ /dev/null @@ -1,3 +0,0 @@ -/* The work is in msnd_pinnacle.c, just define MSND_CLASSIC before it. */ -#define MSND_CLASSIC -#include "msnd_pinnacle.c" diff --git a/sound/oss/msnd_classic.h b/sound/oss/msnd_classic.h deleted file mode 100644 index 1a17dde2f650..000000000000 --- a/sound/oss/msnd_classic.h +++ /dev/null @@ -1,185 +0,0 @@ -/********************************************************************* - * - * msnd_classic.h - * - * Turtle Beach MultiSound Sound Card Driver for Linux - * - * Some parts of this header file were derived from the Turtle Beach - * MultiSound Driver Development Kit. - * - * Copyright (C) 1998 Andrew Veliath - * Copyright (C) 1993 Turtle Beach Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - ********************************************************************/ -#ifndef __MSND_CLASSIC_H -#define __MSND_CLASSIC_H - - -#define DSP_NUMIO 0x10 - -#define HP_MEMM 0x08 - -#define HP_BITM 0x0E -#define HP_WAIT 0x0D -#define HP_DSPR 0x0A -#define HP_PROR 0x0B -#define HP_BLKS 0x0C - -#define HPPRORESET_OFF 0 -#define HPPRORESET_ON 1 - -#define HPDSPRESET_OFF 0 -#define HPDSPRESET_ON 1 - -#define HPBLKSEL_0 0 -#define HPBLKSEL_1 1 - -#define HPWAITSTATE_0 0 -#define HPWAITSTATE_1 1 - -#define HPBITMODE_16 0 -#define HPBITMODE_8 1 - -#define HIDSP_INT_PLAY_UNDER 0x00 -#define HIDSP_INT_RECORD_OVER 0x01 -#define HIDSP_INPUT_CLIPPING 0x02 -#define HIDSP_MIDI_IN_OVER 0x10 -#define HIDSP_MIDI_OVERRUN_ERR 0x13 - -#define HDEXAR_CLEAR_PEAKS 1 -#define HDEXAR_IN_SET_POTS 2 -#define HDEXAR_AUX_SET_POTS 3 -#define HDEXAR_CAL_A_TO_D 4 -#define HDEXAR_RD_EXT_DSP_BITS 5 - -#define TIME_PRO_RESET_DONE 0x028A -#define TIME_PRO_SYSEX 0x0040 -#define TIME_PRO_RESET 0x0032 - -#define AGND 0x01 -#define SIGNAL 0x02 - -#define EXT_DSP_BIT_DCAL 0x0001 -#define EXT_DSP_BIT_MIDI_CON 0x0002 - -#define BUFFSIZE 0x8000 -#define HOSTQ_SIZE 0x40 - -#define SRAM_CNTL_START 0x7F00 -#define SMA_STRUCT_START 0x7F40 - -#define DAP_BUFF_SIZE 0x2400 -#define DAR_BUFF_SIZE 0x2000 - -#define DAPQ_STRUCT_SIZE 0x10 -#define DARQ_STRUCT_SIZE 0x10 -#define DAPQ_BUFF_SIZE (3 * 0x10) -#define DARQ_BUFF_SIZE (3 * 0x10) -#define MODQ_BUFF_SIZE 0x400 -#define MIDQ_BUFF_SIZE 0x200 -#define DSPQ_BUFF_SIZE 0x40 - -#define DAPQ_DATA_BUFF 0x6C00 -#define DARQ_DATA_BUFF 0x6C30 -#define MODQ_DATA_BUFF 0x6C60 -#define MIDQ_DATA_BUFF 0x7060 -#define DSPQ_DATA_BUFF 0x7260 - -#define DAPQ_OFFSET SRAM_CNTL_START -#define DARQ_OFFSET (SRAM_CNTL_START + 0x08) -#define MODQ_OFFSET (SRAM_CNTL_START + 0x10) -#define MIDQ_OFFSET (SRAM_CNTL_START + 0x18) -#define DSPQ_OFFSET (SRAM_CNTL_START + 0x20) - -#define MOP_SYNTH 0x10 -#define MOP_EXTOUT 0x32 -#define MOP_EXTTHRU 0x02 -#define MOP_OUTMASK 0x01 - -#define MIP_EXTIN 0x01 -#define MIP_SYNTH 0x00 -#define MIP_INMASK 0x32 - -/* Classic SMA Common Data */ -#define SMA_wCurrPlayBytes 0x0000 -#define SMA_wCurrRecordBytes 0x0002 -#define SMA_wCurrPlayVolLeft 0x0004 -#define SMA_wCurrPlayVolRight 0x0006 -#define SMA_wCurrInVolLeft 0x0008 -#define SMA_wCurrInVolRight 0x000a -#define SMA_wUser_3 0x000c -#define SMA_wUser_4 0x000e -#define SMA_dwUser_5 0x0010 -#define SMA_dwUser_6 0x0014 -#define SMA_wUser_7 0x0018 -#define SMA_wReserved_A 0x001a -#define SMA_wReserved_B 0x001c -#define SMA_wReserved_C 0x001e -#define SMA_wReserved_D 0x0020 -#define SMA_wReserved_E 0x0022 -#define SMA_wReserved_F 0x0024 -#define SMA_wReserved_G 0x0026 -#define SMA_wReserved_H 0x0028 -#define SMA_wCurrDSPStatusFlags 0x002a -#define SMA_wCurrHostStatusFlags 0x002c -#define SMA_wCurrInputTagBits 0x002e -#define SMA_wCurrLeftPeak 0x0030 -#define SMA_wCurrRightPeak 0x0032 -#define SMA_wExtDSPbits 0x0034 -#define SMA_bExtHostbits 0x0036 -#define SMA_bBoardLevel 0x0037 -#define SMA_bInPotPosRight 0x0038 -#define SMA_bInPotPosLeft 0x0039 -#define SMA_bAuxPotPosRight 0x003a -#define SMA_bAuxPotPosLeft 0x003b -#define SMA_wCurrMastVolLeft 0x003c -#define SMA_wCurrMastVolRight 0x003e -#define SMA_bUser_12 0x0040 -#define SMA_bUser_13 0x0041 -#define SMA_wUser_14 0x0042 -#define SMA_wUser_15 0x0044 -#define SMA_wCalFreqAtoD 0x0046 -#define SMA_wUser_16 0x0048 -#define SMA_wUser_17 0x004a -#define SMA__size 0x004c - -#ifdef HAVE_DSPCODEH -# include "msndperm.c" -# include "msndinit.c" -# define PERMCODE msndperm -# define INITCODE msndinit -# define PERMCODESIZE sizeof(msndperm) -# define INITCODESIZE sizeof(msndinit) -#else -# ifndef CONFIG_MSNDCLAS_INIT_FILE -# define CONFIG_MSNDCLAS_INIT_FILE \ - "/etc/sound/msndinit.bin" -# endif -# ifndef CONFIG_MSNDCLAS_PERM_FILE -# define CONFIG_MSNDCLAS_PERM_FILE \ - "/etc/sound/msndperm.bin" -# endif -# define PERMCODEFILE CONFIG_MSNDCLAS_PERM_FILE -# define INITCODEFILE CONFIG_MSNDCLAS_INIT_FILE -# define PERMCODE dspini -# define INITCODE permini -# define PERMCODESIZE sizeof_dspini -# define INITCODESIZE sizeof_permini -#endif -#define LONGNAME "MultiSound (Classic/Monterey/Tahiti)" - -#endif /* __MSND_CLASSIC_H */ diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c deleted file mode 100644 index d2abc2cf3213..000000000000 --- a/sound/oss/msnd_pinnacle.c +++ /dev/null @@ -1,1941 +0,0 @@ -/********************************************************************* - * - * Turtle Beach MultiSound Sound Card Driver for Linux - * Linux 2.0/2.2 Version - * - * msnd_pinnacle.c / msnd_classic.c - * - * -- If MSND_CLASSIC is defined: - * - * -> driver for Turtle Beach Classic/Monterey/Tahiti - * - * -- Else - * - * -> driver for Turtle Beach Pinnacle/Fiji - * - * Copyright (C) 1998 Andrew Veliath - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * 12-3-2000 Modified IO port validation Steve Sycamore - * - ********************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/mutex.h> -#include <linux/gfp.h> -#include <linux/sched/signal.h> - -#include <asm/irq.h> -#include <asm/io.h> -#include "sound_config.h" -#include "sound_firmware.h" -#ifdef MSND_CLASSIC -# ifndef __alpha__ -# define SLOWIO -# endif -#endif -#include "msnd.h" -#ifdef MSND_CLASSIC -# ifdef CONFIG_MSNDCLAS_HAVE_BOOT -# define HAVE_DSPCODEH -# endif -# include "msnd_classic.h" -# define LOGNAME "msnd_classic" -#else -# ifdef CONFIG_MSNDPIN_HAVE_BOOT -# define HAVE_DSPCODEH -# endif -# include "msnd_pinnacle.h" -# define LOGNAME "msnd_pinnacle" -#endif - -#ifndef CONFIG_MSND_WRITE_NDELAY -# define CONFIG_MSND_WRITE_NDELAY 1 -#endif - -#define get_play_delay_jiffies(size) ((size) * HZ * \ - dev.play_sample_size / 8 / \ - dev.play_sample_rate / \ - dev.play_channels) - -#define get_rec_delay_jiffies(size) ((size) * HZ * \ - dev.rec_sample_size / 8 / \ - dev.rec_sample_rate / \ - dev.rec_channels) - -static DEFINE_MUTEX(msnd_pinnacle_mutex); -static multisound_dev_t dev; - -#ifndef HAVE_DSPCODEH -static char *dspini, *permini; -static int sizeof_dspini, sizeof_permini; -#endif - -static int dsp_full_reset(void); -static void dsp_write_flush(void); - -static __inline__ int chk_send_dsp_cmd(multisound_dev_t *dev, register BYTE cmd) -{ - if (msnd_send_dsp_cmd(dev, cmd) == 0) - return 0; - dsp_full_reset(); - return msnd_send_dsp_cmd(dev, cmd); -} - -static void reset_play_queue(void) -{ - int n; - LPDAQD lpDAQ; - - dev.last_playbank = -1; - writew(PCTODSP_OFFSET(0 * DAQDS__size), dev.DAPQ + JQS_wHead); - writew(PCTODSP_OFFSET(0 * DAQDS__size), dev.DAPQ + JQS_wTail); - - for (n = 0, lpDAQ = dev.base + DAPQ_DATA_BUFF; n < 3; ++n, lpDAQ += DAQDS__size) { - writew(PCTODSP_BASED((DWORD)(DAP_BUFF_SIZE * n)), lpDAQ + DAQDS_wStart); - writew(0, lpDAQ + DAQDS_wSize); - writew(1, lpDAQ + DAQDS_wFormat); - writew(dev.play_sample_size, lpDAQ + DAQDS_wSampleSize); - writew(dev.play_channels, lpDAQ + DAQDS_wChannels); - writew(dev.play_sample_rate, lpDAQ + DAQDS_wSampleRate); - writew(HIMT_PLAY_DONE * 0x100 + n, lpDAQ + DAQDS_wIntMsg); - writew(n, lpDAQ + DAQDS_wFlags); - } -} - -static void reset_record_queue(void) -{ - int n; - LPDAQD lpDAQ; - unsigned long flags; - - dev.last_recbank = 2; - writew(PCTODSP_OFFSET(0 * DAQDS__size), dev.DARQ + JQS_wHead); - writew(PCTODSP_OFFSET(dev.last_recbank * DAQDS__size), dev.DARQ + JQS_wTail); - - /* Critical section: bank 1 access */ - spin_lock_irqsave(&dev.lock, flags); - msnd_outb(HPBLKSEL_1, dev.io + HP_BLKS); - memset_io(dev.base, 0, DAR_BUFF_SIZE * 3); - msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS); - spin_unlock_irqrestore(&dev.lock, flags); - - for (n = 0, lpDAQ = dev.base + DARQ_DATA_BUFF; n < 3; ++n, lpDAQ += DAQDS__size) { - writew(PCTODSP_BASED((DWORD)(DAR_BUFF_SIZE * n)) + 0x4000, lpDAQ + DAQDS_wStart); - writew(DAR_BUFF_SIZE, lpDAQ + DAQDS_wSize); - writew(1, lpDAQ + DAQDS_wFormat); - writew(dev.rec_sample_size, lpDAQ + DAQDS_wSampleSize); - writew(dev.rec_channels, lpDAQ + DAQDS_wChannels); - writew(dev.rec_sample_rate, lpDAQ + DAQDS_wSampleRate); - writew(HIMT_RECORD_DONE * 0x100 + n, lpDAQ + DAQDS_wIntMsg); - writew(n, lpDAQ + DAQDS_wFlags); - } -} - -static void reset_queues(void) -{ - if (dev.mode & FMODE_WRITE) { - msnd_fifo_make_empty(&dev.DAPF); - reset_play_queue(); - } - if (dev.mode & FMODE_READ) { - msnd_fifo_make_empty(&dev.DARF); - reset_record_queue(); - } -} - -static int dsp_set_format(struct file *file, int val) -{ - int data, i; - LPDAQD lpDAQ, lpDARQ; - - lpDAQ = dev.base + DAPQ_DATA_BUFF; - lpDARQ = dev.base + DARQ_DATA_BUFF; - - switch (val) { - case AFMT_U8: - case AFMT_S16_LE: - data = val; - break; - default: - data = DEFSAMPLESIZE; - break; - } - - for (i = 0; i < 3; ++i, lpDAQ += DAQDS__size, lpDARQ += DAQDS__size) { - if (file->f_mode & FMODE_WRITE) - writew(data, lpDAQ + DAQDS_wSampleSize); - if (file->f_mode & FMODE_READ) - writew(data, lpDARQ + DAQDS_wSampleSize); - } - if (file->f_mode & FMODE_WRITE) - dev.play_sample_size = data; - if (file->f_mode & FMODE_READ) - dev.rec_sample_size = data; - - return data; -} - -static int dsp_get_frag_size(void) -{ - int size; - size = dev.fifosize / 4; - if (size > 32 * 1024) - size = 32 * 1024; - return size; -} - -static int dsp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int val, i, data, tmp; - LPDAQD lpDAQ, lpDARQ; - audio_buf_info abinfo; - unsigned long flags; - int __user *p = (int __user *)arg; - - lpDAQ = dev.base + DAPQ_DATA_BUFF; - lpDARQ = dev.base + DARQ_DATA_BUFF; - - switch (cmd) { - case SNDCTL_DSP_SUBDIVIDE: - case SNDCTL_DSP_SETFRAGMENT: - case SNDCTL_DSP_SETDUPLEX: - case SNDCTL_DSP_POST: - return 0; - - case SNDCTL_DSP_GETIPTR: - case SNDCTL_DSP_GETOPTR: - case SNDCTL_DSP_MAPINBUF: - case SNDCTL_DSP_MAPOUTBUF: - return -EINVAL; - - case SNDCTL_DSP_GETOSPACE: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - spin_lock_irqsave(&dev.lock, flags); - abinfo.fragsize = dsp_get_frag_size(); - abinfo.bytes = dev.DAPF.n - dev.DAPF.len; - abinfo.fragstotal = dev.DAPF.n / abinfo.fragsize; - abinfo.fragments = abinfo.bytes / abinfo.fragsize; - spin_unlock_irqrestore(&dev.lock, flags); - return copy_to_user((void __user *)arg, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETISPACE: - if (!(file->f_mode & FMODE_READ)) - return -EINVAL; - spin_lock_irqsave(&dev.lock, flags); - abinfo.fragsize = dsp_get_frag_size(); - abinfo.bytes = dev.DARF.n - dev.DARF.len; - abinfo.fragstotal = dev.DARF.n / abinfo.fragsize; - abinfo.fragments = abinfo.bytes / abinfo.fragsize; - spin_unlock_irqrestore(&dev.lock, flags); - return copy_to_user((void __user *)arg, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_RESET: - dev.nresets = 0; - reset_queues(); - return 0; - - case SNDCTL_DSP_SYNC: - dsp_write_flush(); - return 0; - - case SNDCTL_DSP_GETBLKSIZE: - tmp = dsp_get_frag_size(); - if (put_user(tmp, p)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_GETFMTS: - val = AFMT_S16_LE | AFMT_U8; - if (put_user(val, p)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_SETFMT: - if (get_user(val, p)) - return -EFAULT; - - if (file->f_mode & FMODE_WRITE) - data = val == AFMT_QUERY - ? dev.play_sample_size - : dsp_set_format(file, val); - else - data = val == AFMT_QUERY - ? dev.rec_sample_size - : dsp_set_format(file, val); - - if (put_user(data, p)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_NONBLOCK: - if (!test_bit(F_DISABLE_WRITE_NDELAY, &dev.flags) && - file->f_mode & FMODE_WRITE) - dev.play_ndelay = 1; - if (file->f_mode & FMODE_READ) - dev.rec_ndelay = 1; - return 0; - - case SNDCTL_DSP_GETCAPS: - val = DSP_CAP_DUPLEX | DSP_CAP_BATCH; - if (put_user(val, p)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_SPEED: - if (get_user(val, p)) - return -EFAULT; - - if (val < 8000) - val = 8000; - - if (val > 48000) - val = 48000; - - data = val; - - for (i = 0; i < 3; ++i, lpDAQ += DAQDS__size, lpDARQ += DAQDS__size) { - if (file->f_mode & FMODE_WRITE) - writew(data, lpDAQ + DAQDS_wSampleRate); - if (file->f_mode & FMODE_READ) - writew(data, lpDARQ + DAQDS_wSampleRate); - } - if (file->f_mode & FMODE_WRITE) - dev.play_sample_rate = data; - if (file->f_mode & FMODE_READ) - dev.rec_sample_rate = data; - - if (put_user(data, p)) - return -EFAULT; - return 0; - - case SNDCTL_DSP_CHANNELS: - case SNDCTL_DSP_STEREO: - if (get_user(val, p)) - return -EFAULT; - - if (cmd == SNDCTL_DSP_CHANNELS) { - switch (val) { - case 1: - case 2: - data = val; - break; - default: - val = data = 2; - break; - } - } else { - switch (val) { - case 0: - data = 1; - break; - default: - val = 1; - case 1: - data = 2; - break; - } - } - - for (i = 0; i < 3; ++i, lpDAQ += DAQDS__size, lpDARQ += DAQDS__size) { - if (file->f_mode & FMODE_WRITE) - writew(data, lpDAQ + DAQDS_wChannels); - if (file->f_mode & FMODE_READ) - writew(data, lpDARQ + DAQDS_wChannels); - } - if (file->f_mode & FMODE_WRITE) - dev.play_channels = data; - if (file->f_mode & FMODE_READ) - dev.rec_channels = data; - - if (put_user(val, p)) - return -EFAULT; - return 0; - } - - return -EINVAL; -} - -static int mixer_get(int d) -{ - if (d > 31) - return -EINVAL; - - switch (d) { - case SOUND_MIXER_VOLUME: - case SOUND_MIXER_PCM: - case SOUND_MIXER_LINE: - case SOUND_MIXER_IMIX: - case SOUND_MIXER_LINE1: -#ifndef MSND_CLASSIC - case SOUND_MIXER_MIC: - case SOUND_MIXER_SYNTH: -#endif - return (dev.left_levels[d] >> 8) * 100 / 0xff | - (((dev.right_levels[d] >> 8) * 100 / 0xff) << 8); - default: - return 0; - } -} - -#define update_volm(a,b) \ - writew((dev.left_levels[a] >> 1) * \ - readw(dev.SMA + SMA_wCurrMastVolLeft) / 0xffff, \ - dev.SMA + SMA_##b##Left); \ - writew((dev.right_levels[a] >> 1) * \ - readw(dev.SMA + SMA_wCurrMastVolRight) / 0xffff, \ - dev.SMA + SMA_##b##Right); - -#define update_potm(d,s,ar) \ - writeb((dev.left_levels[d] >> 8) * \ - readw(dev.SMA + SMA_wCurrMastVolLeft) / 0xffff, \ - dev.SMA + SMA_##s##Left); \ - writeb((dev.right_levels[d] >> 8) * \ - readw(dev.SMA + SMA_wCurrMastVolRight) / 0xffff, \ - dev.SMA + SMA_##s##Right); \ - if (msnd_send_word(&dev, 0, 0, ar) == 0) \ - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - -#define update_pot(d,s,ar) \ - writeb(dev.left_levels[d] >> 8, \ - dev.SMA + SMA_##s##Left); \ - writeb(dev.right_levels[d] >> 8, \ - dev.SMA + SMA_##s##Right); \ - if (msnd_send_word(&dev, 0, 0, ar) == 0) \ - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - -static int mixer_set(int d, int value) -{ - int left = value & 0x000000ff; - int right = (value & 0x0000ff00) >> 8; - int bLeft, bRight; - int wLeft, wRight; - int updatemaster = 0; - - if (d > 31) - return -EINVAL; - - bLeft = left * 0xff / 100; - wLeft = left * 0xffff / 100; - - bRight = right * 0xff / 100; - wRight = right * 0xffff / 100; - - dev.left_levels[d] = wLeft; - dev.right_levels[d] = wRight; - - switch (d) { - /* master volume unscaled controls */ - case SOUND_MIXER_LINE: /* line pot control */ - /* scaled by IMIX in digital mix */ - writeb(bLeft, dev.SMA + SMA_bInPotPosLeft); - writeb(bRight, dev.SMA + SMA_bInPotPosRight); - if (msnd_send_word(&dev, 0, 0, HDEXAR_IN_SET_POTS) == 0) - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - break; -#ifndef MSND_CLASSIC - case SOUND_MIXER_MIC: /* mic pot control */ - /* scaled by IMIX in digital mix */ - writeb(bLeft, dev.SMA + SMA_bMicPotPosLeft); - writeb(bRight, dev.SMA + SMA_bMicPotPosRight); - if (msnd_send_word(&dev, 0, 0, HDEXAR_MIC_SET_POTS) == 0) - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - break; -#endif - case SOUND_MIXER_VOLUME: /* master volume */ - writew(wLeft, dev.SMA + SMA_wCurrMastVolLeft); - writew(wRight, dev.SMA + SMA_wCurrMastVolRight); - /* fall through */ - - case SOUND_MIXER_LINE1: /* aux pot control */ - /* scaled by master volume */ - /* fall through */ - - /* digital controls */ - case SOUND_MIXER_SYNTH: /* synth vol (dsp mix) */ - case SOUND_MIXER_PCM: /* pcm vol (dsp mix) */ - case SOUND_MIXER_IMIX: /* input monitor (dsp mix) */ - /* scaled by master volume */ - updatemaster = 1; - break; - - default: - return 0; - } - - if (updatemaster) { - /* update master volume scaled controls */ - update_volm(SOUND_MIXER_PCM, wCurrPlayVol); - update_volm(SOUND_MIXER_IMIX, wCurrInVol); -#ifndef MSND_CLASSIC - update_volm(SOUND_MIXER_SYNTH, wCurrMHdrVol); -#endif - update_potm(SOUND_MIXER_LINE1, bAuxPotPos, HDEXAR_AUX_SET_POTS); - } - - return mixer_get(d); -} - -static void mixer_setup(void) -{ - update_pot(SOUND_MIXER_LINE, bInPotPos, HDEXAR_IN_SET_POTS); - update_potm(SOUND_MIXER_LINE1, bAuxPotPos, HDEXAR_AUX_SET_POTS); - update_volm(SOUND_MIXER_PCM, wCurrPlayVol); - update_volm(SOUND_MIXER_IMIX, wCurrInVol); -#ifndef MSND_CLASSIC - update_pot(SOUND_MIXER_MIC, bMicPotPos, HDEXAR_MIC_SET_POTS); - update_volm(SOUND_MIXER_SYNTH, wCurrMHdrVol); -#endif -} - -static unsigned long set_recsrc(unsigned long recsrc) -{ - if (dev.recsrc == recsrc) - return dev.recsrc; -#ifdef HAVE_NORECSRC - else if (recsrc == 0) - dev.recsrc = 0; -#endif - else - dev.recsrc ^= recsrc; - -#ifndef MSND_CLASSIC - if (dev.recsrc & SOUND_MASK_IMIX) { - if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_ANA_IN) == 0) - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - } - else if (dev.recsrc & SOUND_MASK_SYNTH) { - if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_SYNTH_IN) == 0) - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - } - else if ((dev.recsrc & SOUND_MASK_DIGITAL1) && test_bit(F_HAVEDIGITAL, &dev.flags)) { - if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_DAT_IN) == 0) - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); - } - else { -#ifdef HAVE_NORECSRC - /* Select no input (?) */ - dev.recsrc = 0; -#else - dev.recsrc = SOUND_MASK_IMIX; - if (msnd_send_word(&dev, 0, 0, HDEXAR_SET_ANA_IN) == 0) - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ); -#endif - } -#endif /* MSND_CLASSIC */ - - return dev.recsrc; -} - -static unsigned long force_recsrc(unsigned long recsrc) -{ - dev.recsrc = 0; - return set_recsrc(recsrc); -} - -#define set_mixer_info() \ - memset(&info, 0, sizeof(info)); \ - strlcpy(info.id, "MSNDMIXER", sizeof(info.id)); \ - strlcpy(info.name, "MultiSound Mixer", sizeof(info.name)); - -static int mixer_ioctl(unsigned int cmd, unsigned long arg) -{ - if (cmd == SOUND_MIXER_INFO) { - mixer_info info; - set_mixer_info(); - info.modify_counter = dev.mixer_mod_count; - if (copy_to_user((void __user *)arg, &info, sizeof(info))) - return -EFAULT; - return 0; - } else if (cmd == SOUND_OLD_MIXER_INFO) { - _old_mixer_info info; - set_mixer_info(); - if (copy_to_user((void __user *)arg, &info, sizeof(info))) - return -EFAULT; - return 0; - } else if (cmd == SOUND_MIXER_PRIVATE1) { - dev.nresets = 0; - dsp_full_reset(); - return 0; - } else if (((cmd >> 8) & 0xff) == 'M') { - int val = 0; - - if (_SIOC_DIR(cmd) & _SIOC_WRITE) { - switch (cmd & 0xff) { - case SOUND_MIXER_RECSRC: - if (get_user(val, (int __user *)arg)) - return -EFAULT; - val = set_recsrc(val); - break; - - default: - if (get_user(val, (int __user *)arg)) - return -EFAULT; - val = mixer_set(cmd & 0xff, val); - break; - } - ++dev.mixer_mod_count; - return put_user(val, (int __user *)arg); - } else { - switch (cmd & 0xff) { - case SOUND_MIXER_RECSRC: - val = dev.recsrc; - break; - - case SOUND_MIXER_DEVMASK: - case SOUND_MIXER_STEREODEVS: - val = SOUND_MASK_PCM | - SOUND_MASK_LINE | - SOUND_MASK_IMIX | - SOUND_MASK_LINE1 | -#ifndef MSND_CLASSIC - SOUND_MASK_MIC | - SOUND_MASK_SYNTH | -#endif - SOUND_MASK_VOLUME; - break; - - case SOUND_MIXER_RECMASK: -#ifdef MSND_CLASSIC - val = 0; -#else - val = SOUND_MASK_IMIX | - SOUND_MASK_SYNTH; - if (test_bit(F_HAVEDIGITAL, &dev.flags)) - val |= SOUND_MASK_DIGITAL1; -#endif - break; - - case SOUND_MIXER_CAPS: - val = SOUND_CAP_EXCL_INPUT; - break; - - default: - if ((val = mixer_get(cmd & 0xff)) < 0) - return -EINVAL; - break; - } - } - - return put_user(val, (int __user *)arg); - } - - return -EINVAL; -} - -static long dev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int minor = iminor(file_inode(file)); - int ret; - - if (cmd == OSS_GETVERSION) { - int sound_version = SOUND_VERSION; - return put_user(sound_version, (int __user *)arg); - } - - ret = -EINVAL; - - mutex_lock(&msnd_pinnacle_mutex); - if (minor == dev.dsp_minor) - ret = dsp_ioctl(file, cmd, arg); - else if (minor == dev.mixer_minor) - ret = mixer_ioctl(cmd, arg); - mutex_unlock(&msnd_pinnacle_mutex); - - return ret; -} - -static void dsp_write_flush(void) -{ - int timeout = get_play_delay_jiffies(dev.DAPF.len); - - if (!(dev.mode & FMODE_WRITE) || !test_bit(F_WRITING, &dev.flags)) - return; - set_bit(F_WRITEFLUSH, &dev.flags); - wait_event_interruptible_timeout( - dev.writeflush, - !test_bit(F_WRITEFLUSH, &dev.flags), - timeout); - clear_bit(F_WRITEFLUSH, &dev.flags); - if (!signal_pending(current)) { - __set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(get_play_delay_jiffies(DAP_BUFF_SIZE)); - } - clear_bit(F_WRITING, &dev.flags); -} - -static void dsp_halt(struct file *file) -{ - if ((file ? file->f_mode : dev.mode) & FMODE_READ) { - clear_bit(F_READING, &dev.flags); - chk_send_dsp_cmd(&dev, HDEX_RECORD_STOP); - msnd_disable_irq(&dev); - if (file) { - printk(KERN_DEBUG LOGNAME ": Stopping read for %p\n", file); - dev.mode &= ~FMODE_READ; - } - clear_bit(F_AUDIO_READ_INUSE, &dev.flags); - } - if ((file ? file->f_mode : dev.mode) & FMODE_WRITE) { - if (test_bit(F_WRITING, &dev.flags)) { - dsp_write_flush(); - chk_send_dsp_cmd(&dev, HDEX_PLAY_STOP); - } - msnd_disable_irq(&dev); - if (file) { - printk(KERN_DEBUG LOGNAME ": Stopping write for %p\n", file); - dev.mode &= ~FMODE_WRITE; - } - clear_bit(F_AUDIO_WRITE_INUSE, &dev.flags); - } -} - -static int dsp_release(struct file *file) -{ - dsp_halt(file); - return 0; -} - -static int dsp_open(struct file *file) -{ - if ((file ? file->f_mode : dev.mode) & FMODE_WRITE) { - set_bit(F_AUDIO_WRITE_INUSE, &dev.flags); - clear_bit(F_WRITING, &dev.flags); - msnd_fifo_make_empty(&dev.DAPF); - reset_play_queue(); - if (file) { - printk(KERN_DEBUG LOGNAME ": Starting write for %p\n", file); - dev.mode |= FMODE_WRITE; - } - msnd_enable_irq(&dev); - } - if ((file ? file->f_mode : dev.mode) & FMODE_READ) { - set_bit(F_AUDIO_READ_INUSE, &dev.flags); - clear_bit(F_READING, &dev.flags); - msnd_fifo_make_empty(&dev.DARF); - reset_record_queue(); - if (file) { - printk(KERN_DEBUG LOGNAME ": Starting read for %p\n", file); - dev.mode |= FMODE_READ; - } - msnd_enable_irq(&dev); - } - return 0; -} - -static void set_default_play_audio_parameters(void) -{ - dev.play_sample_size = DEFSAMPLESIZE; - dev.play_sample_rate = DEFSAMPLERATE; - dev.play_channels = DEFCHANNELS; -} - -static void set_default_rec_audio_parameters(void) -{ - dev.rec_sample_size = DEFSAMPLESIZE; - dev.rec_sample_rate = DEFSAMPLERATE; - dev.rec_channels = DEFCHANNELS; -} - -static void set_default_audio_parameters(void) -{ - set_default_play_audio_parameters(); - set_default_rec_audio_parameters(); -} - -static int dev_open(struct inode *inode, struct file *file) -{ - int minor = iminor(inode); - int err = 0; - - mutex_lock(&msnd_pinnacle_mutex); - if (minor == dev.dsp_minor) { - if ((file->f_mode & FMODE_WRITE && - test_bit(F_AUDIO_WRITE_INUSE, &dev.flags)) || - (file->f_mode & FMODE_READ && - test_bit(F_AUDIO_READ_INUSE, &dev.flags))) { - err = -EBUSY; - goto out; - } - - if ((err = dsp_open(file)) >= 0) { - dev.nresets = 0; - if (file->f_mode & FMODE_WRITE) { - set_default_play_audio_parameters(); - if (!test_bit(F_DISABLE_WRITE_NDELAY, &dev.flags)) - dev.play_ndelay = (file->f_flags & O_NDELAY) ? 1 : 0; - else - dev.play_ndelay = 0; - } - if (file->f_mode & FMODE_READ) { - set_default_rec_audio_parameters(); - dev.rec_ndelay = (file->f_flags & O_NDELAY) ? 1 : 0; - } - } - } - else if (minor == dev.mixer_minor) { - /* nothing */ - } else - err = -EINVAL; -out: - mutex_unlock(&msnd_pinnacle_mutex); - return err; -} - -static int dev_release(struct inode *inode, struct file *file) -{ - int minor = iminor(inode); - int err = 0; - - mutex_lock(&msnd_pinnacle_mutex); - if (minor == dev.dsp_minor) - err = dsp_release(file); - else if (minor == dev.mixer_minor) { - /* nothing */ - } else - err = -EINVAL; - mutex_unlock(&msnd_pinnacle_mutex); - return err; -} - -static __inline__ int pack_DARQ_to_DARF(register int bank) -{ - register int size, timeout = 3; - register WORD wTmp; - LPDAQD DAQD; - - /* Increment the tail and check for queue wrap */ - wTmp = readw(dev.DARQ + JQS_wTail) + PCTODSP_OFFSET(DAQDS__size); - if (wTmp > readw(dev.DARQ + JQS_wSize)) - wTmp = 0; - while (wTmp == readw(dev.DARQ + JQS_wHead) && timeout--) - udelay(1); - writew(wTmp, dev.DARQ + JQS_wTail); - - /* Get our digital audio queue struct */ - DAQD = bank * DAQDS__size + dev.base + DARQ_DATA_BUFF; - - /* Get length of data */ - size = readw(DAQD + DAQDS_wSize); - - /* Read data from the head (unprotected bank 1 access okay - since this is only called inside an interrupt) */ - msnd_outb(HPBLKSEL_1, dev.io + HP_BLKS); - msnd_fifo_write_io( - &dev.DARF, - dev.base + bank * DAR_BUFF_SIZE, - size); - msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS); - - return 1; -} - -static __inline__ int pack_DAPF_to_DAPQ(register int start) -{ - register WORD DAPQ_tail; - register int protect = start, nbanks = 0; - LPDAQD DAQD; - - DAPQ_tail = readw(dev.DAPQ + JQS_wTail); - while (DAPQ_tail != readw(dev.DAPQ + JQS_wHead) || start) { - register int bank_num = DAPQ_tail / PCTODSP_OFFSET(DAQDS__size); - register int n; - unsigned long flags; - - /* Write the data to the new tail */ - if (protect) { - /* Critical section: protect fifo in non-interrupt */ - spin_lock_irqsave(&dev.lock, flags); - n = msnd_fifo_read_io( - &dev.DAPF, - dev.base + bank_num * DAP_BUFF_SIZE, - DAP_BUFF_SIZE); - spin_unlock_irqrestore(&dev.lock, flags); - } else { - n = msnd_fifo_read_io( - &dev.DAPF, - dev.base + bank_num * DAP_BUFF_SIZE, - DAP_BUFF_SIZE); - } - if (!n) - break; - - if (start) - start = 0; - - /* Get our digital audio queue struct */ - DAQD = bank_num * DAQDS__size + dev.base + DAPQ_DATA_BUFF; - - /* Write size of this bank */ - writew(n, DAQD + DAQDS_wSize); - ++nbanks; - - /* Then advance the tail */ - DAPQ_tail = (++bank_num % 3) * PCTODSP_OFFSET(DAQDS__size); - writew(DAPQ_tail, dev.DAPQ + JQS_wTail); - /* Tell the DSP to play the bank */ - msnd_send_dsp_cmd(&dev, HDEX_PLAY_START); - } - return nbanks; -} - -static int dsp_read(char __user *buf, size_t len) -{ - int count = len; - char *page = (char *)__get_free_page(GFP_KERNEL); - int timeout = get_rec_delay_jiffies(DAR_BUFF_SIZE); - - if (!page) - return -ENOMEM; - - while (count > 0) { - int n, k; - unsigned long flags; - - k = PAGE_SIZE; - if (k > count) - k = count; - - /* Critical section: protect fifo in non-interrupt */ - spin_lock_irqsave(&dev.lock, flags); - n = msnd_fifo_read(&dev.DARF, page, k); - spin_unlock_irqrestore(&dev.lock, flags); - if (copy_to_user(buf, page, n)) { - free_page((unsigned long)page); - return -EFAULT; - } - buf += n; - count -= n; - - if (n == k && count) - continue; - - if (!test_bit(F_READING, &dev.flags) && dev.mode & FMODE_READ) { - dev.last_recbank = -1; - if (chk_send_dsp_cmd(&dev, HDEX_RECORD_START) == 0) - set_bit(F_READING, &dev.flags); - } - - if (dev.rec_ndelay) { - free_page((unsigned long)page); - return count == len ? -EAGAIN : len - count; - } - - if (count > 0) { - set_bit(F_READBLOCK, &dev.flags); - if (wait_event_interruptible_timeout( - dev.readblock, - test_bit(F_READBLOCK, &dev.flags), - timeout) <= 0) - clear_bit(F_READING, &dev.flags); - if (signal_pending(current)) { - free_page((unsigned long)page); - return -EINTR; - } - } - } - free_page((unsigned long)page); - return len - count; -} - -static int dsp_write(const char __user *buf, size_t len) -{ - int count = len; - char *page = (char *)__get_free_page(GFP_KERNEL); - int timeout = get_play_delay_jiffies(DAP_BUFF_SIZE); - - if (!page) - return -ENOMEM; - - while (count > 0) { - int n, k; - unsigned long flags; - - k = PAGE_SIZE; - if (k > count) - k = count; - - if (copy_from_user(page, buf, k)) { - free_page((unsigned long)page); - return -EFAULT; - } - - /* Critical section: protect fifo in non-interrupt */ - spin_lock_irqsave(&dev.lock, flags); - n = msnd_fifo_write(&dev.DAPF, page, k); - spin_unlock_irqrestore(&dev.lock, flags); - buf += n; - count -= n; - - if (count && n == k) - continue; - - if (!test_bit(F_WRITING, &dev.flags) && (dev.mode & FMODE_WRITE)) { - dev.last_playbank = -1; - if (pack_DAPF_to_DAPQ(1) > 0) - set_bit(F_WRITING, &dev.flags); - } - - if (dev.play_ndelay) { - free_page((unsigned long)page); - return count == len ? -EAGAIN : len - count; - } - - if (count > 0) { - set_bit(F_WRITEBLOCK, &dev.flags); - wait_event_interruptible_timeout( - dev.writeblock, - test_bit(F_WRITEBLOCK, &dev.flags), - timeout); - if (signal_pending(current)) { - free_page((unsigned long)page); - return -EINTR; - } - } - } - - free_page((unsigned long)page); - return len - count; -} - -static ssize_t dev_read(struct file *file, char __user *buf, size_t count, loff_t *off) -{ - int minor = iminor(file_inode(file)); - if (minor == dev.dsp_minor) - return dsp_read(buf, count); - else - return -EINVAL; -} - -static ssize_t dev_write(struct file *file, const char __user *buf, size_t count, loff_t *off) -{ - int minor = iminor(file_inode(file)); - if (minor == dev.dsp_minor) - return dsp_write(buf, count); - else - return -EINVAL; -} - -static __inline__ void eval_dsp_msg(register WORD wMessage) -{ - switch (HIBYTE(wMessage)) { - case HIMT_PLAY_DONE: - if (dev.last_playbank == LOBYTE(wMessage) || !test_bit(F_WRITING, &dev.flags)) - break; - dev.last_playbank = LOBYTE(wMessage); - - if (pack_DAPF_to_DAPQ(0) <= 0) { - if (!test_bit(F_WRITEBLOCK, &dev.flags)) { - if (test_and_clear_bit(F_WRITEFLUSH, &dev.flags)) - wake_up_interruptible(&dev.writeflush); - } - clear_bit(F_WRITING, &dev.flags); - } - - if (test_and_clear_bit(F_WRITEBLOCK, &dev.flags)) - wake_up_interruptible(&dev.writeblock); - break; - - case HIMT_RECORD_DONE: - if (dev.last_recbank == LOBYTE(wMessage)) - break; - dev.last_recbank = LOBYTE(wMessage); - - pack_DARQ_to_DARF(dev.last_recbank); - - if (test_and_clear_bit(F_READBLOCK, &dev.flags)) - wake_up_interruptible(&dev.readblock); - break; - - case HIMT_DSP: - switch (LOBYTE(wMessage)) { -#ifndef MSND_CLASSIC - case HIDSP_PLAY_UNDER: -#endif - case HIDSP_INT_PLAY_UNDER: -/* printk(KERN_DEBUG LOGNAME ": Play underflow\n"); */ - clear_bit(F_WRITING, &dev.flags); - break; - - case HIDSP_INT_RECORD_OVER: -/* printk(KERN_DEBUG LOGNAME ": Record overflow\n"); */ - clear_bit(F_READING, &dev.flags); - break; - - default: -/* printk(KERN_DEBUG LOGNAME ": DSP message %d 0x%02x\n", - LOBYTE(wMessage), LOBYTE(wMessage)); */ - break; - } - break; - - case HIMT_MIDI_IN_UCHAR: - if (dev.midi_in_interrupt) - (*dev.midi_in_interrupt)(&dev); - break; - - default: -/* printk(KERN_DEBUG LOGNAME ": HIMT message %d 0x%02x\n", HIBYTE(wMessage), HIBYTE(wMessage)); */ - break; - } -} - -static irqreturn_t intr(int irq, void *dev_id) -{ - /* Send ack to DSP */ - msnd_inb(dev.io + HP_RXL); - - /* Evaluate queued DSP messages */ - while (readw(dev.DSPQ + JQS_wTail) != readw(dev.DSPQ + JQS_wHead)) { - register WORD wTmp; - - eval_dsp_msg(readw(dev.pwDSPQData + 2*readw(dev.DSPQ + JQS_wHead))); - - if ((wTmp = readw(dev.DSPQ + JQS_wHead) + 1) > readw(dev.DSPQ + JQS_wSize)) - writew(0, dev.DSPQ + JQS_wHead); - else - writew(wTmp, dev.DSPQ + JQS_wHead); - } - return IRQ_HANDLED; -} - -static const struct file_operations dev_fileops = { - .owner = THIS_MODULE, - .read = dev_read, - .write = dev_write, - .unlocked_ioctl = dev_ioctl, - .open = dev_open, - .release = dev_release, - .llseek = noop_llseek, -}; - -static int reset_dsp(void) -{ - int timeout = 100; - - msnd_outb(HPDSPRESET_ON, dev.io + HP_DSPR); - mdelay(1); -#ifndef MSND_CLASSIC - dev.info = msnd_inb(dev.io + HP_INFO); -#endif - msnd_outb(HPDSPRESET_OFF, dev.io + HP_DSPR); - mdelay(1); - while (timeout-- > 0) { - if (msnd_inb(dev.io + HP_CVR) == HP_CVR_DEF) - return 0; - mdelay(1); - } - printk(KERN_ERR LOGNAME ": Cannot reset DSP\n"); - - return -EIO; -} - -static int __init probe_multisound(void) -{ -#ifndef MSND_CLASSIC - char *xv, *rev = NULL; - char *pin = "Pinnacle", *fiji = "Fiji"; - char *pinfiji = "Pinnacle/Fiji"; -#endif - - if (!request_region(dev.io, dev.numio, "probing")) { - printk(KERN_ERR LOGNAME ": I/O port conflict\n"); - return -ENODEV; - } - - if (reset_dsp() < 0) { - release_region(dev.io, dev.numio); - return -ENODEV; - } - -#ifdef MSND_CLASSIC - dev.name = "Classic/Tahiti/Monterey"; - printk(KERN_INFO LOGNAME ": %s, " -#else - switch (dev.info >> 4) { - case 0xf: xv = "<= 1.15"; break; - case 0x1: xv = "1.18/1.2"; break; - case 0x2: xv = "1.3"; break; - case 0x3: xv = "1.4"; break; - default: xv = "unknown"; break; - } - - switch (dev.info & 0x7) { - case 0x0: rev = "I"; dev.name = pin; break; - case 0x1: rev = "F"; dev.name = pin; break; - case 0x2: rev = "G"; dev.name = pin; break; - case 0x3: rev = "H"; dev.name = pin; break; - case 0x4: rev = "E"; dev.name = fiji; break; - case 0x5: rev = "C"; dev.name = fiji; break; - case 0x6: rev = "D"; dev.name = fiji; break; - case 0x7: - rev = "A-B (Fiji) or A-E (Pinnacle)"; - dev.name = pinfiji; - break; - } - printk(KERN_INFO LOGNAME ": %s revision %s, Xilinx version %s, " -#endif /* MSND_CLASSIC */ - "I/O 0x%x-0x%x, IRQ %d, memory mapped to %p-%p\n", - dev.name, -#ifndef MSND_CLASSIC - rev, xv, -#endif - dev.io, dev.io + dev.numio - 1, - dev.irq, - dev.base, dev.base + 0x7fff); - - release_region(dev.io, dev.numio); - return 0; -} - -static int init_sma(void) -{ - static int initted; - WORD mastVolLeft, mastVolRight; - unsigned long flags; - -#ifdef MSND_CLASSIC - msnd_outb(dev.memid, dev.io + HP_MEMM); -#endif - msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS); - if (initted) { - mastVolLeft = readw(dev.SMA + SMA_wCurrMastVolLeft); - mastVolRight = readw(dev.SMA + SMA_wCurrMastVolRight); - } else - mastVolLeft = mastVolRight = 0; - memset_io(dev.base, 0, 0x8000); - - /* Critical section: bank 1 access */ - spin_lock_irqsave(&dev.lock, flags); - msnd_outb(HPBLKSEL_1, dev.io + HP_BLKS); - memset_io(dev.base, 0, 0x8000); - msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS); - spin_unlock_irqrestore(&dev.lock, flags); - - dev.pwDSPQData = (dev.base + DSPQ_DATA_BUFF); - dev.pwMODQData = (dev.base + MODQ_DATA_BUFF); - dev.pwMIDQData = (dev.base + MIDQ_DATA_BUFF); - - /* Motorola 56k shared memory base */ - dev.SMA = dev.base + SMA_STRUCT_START; - - /* Digital audio play queue */ - dev.DAPQ = dev.base + DAPQ_OFFSET; - msnd_init_queue(dev.DAPQ, DAPQ_DATA_BUFF, DAPQ_BUFF_SIZE); - - /* Digital audio record queue */ - dev.DARQ = dev.base + DARQ_OFFSET; - msnd_init_queue(dev.DARQ, DARQ_DATA_BUFF, DARQ_BUFF_SIZE); - - /* MIDI out queue */ - dev.MODQ = dev.base + MODQ_OFFSET; - msnd_init_queue(dev.MODQ, MODQ_DATA_BUFF, MODQ_BUFF_SIZE); - - /* MIDI in queue */ - dev.MIDQ = dev.base + MIDQ_OFFSET; - msnd_init_queue(dev.MIDQ, MIDQ_DATA_BUFF, MIDQ_BUFF_SIZE); - - /* DSP -> host message queue */ - dev.DSPQ = dev.base + DSPQ_OFFSET; - msnd_init_queue(dev.DSPQ, DSPQ_DATA_BUFF, DSPQ_BUFF_SIZE); - - /* Setup some DSP values */ -#ifndef MSND_CLASSIC - writew(1, dev.SMA + SMA_wCurrPlayFormat); - writew(dev.play_sample_size, dev.SMA + SMA_wCurrPlaySampleSize); - writew(dev.play_channels, dev.SMA + SMA_wCurrPlayChannels); - writew(dev.play_sample_rate, dev.SMA + SMA_wCurrPlaySampleRate); -#endif - writew(dev.play_sample_rate, dev.SMA + SMA_wCalFreqAtoD); - writew(mastVolLeft, dev.SMA + SMA_wCurrMastVolLeft); - writew(mastVolRight, dev.SMA + SMA_wCurrMastVolRight); -#ifndef MSND_CLASSIC - writel(0x00010000, dev.SMA + SMA_dwCurrPlayPitch); - writel(0x00000001, dev.SMA + SMA_dwCurrPlayRate); -#endif - writew(0x303, dev.SMA + SMA_wCurrInputTagBits); - - initted = 1; - - return 0; -} - -static int __init calibrate_adc(WORD srate) -{ - writew(srate, dev.SMA + SMA_wCalFreqAtoD); - if (dev.calibrate_signal == 0) - writew(readw(dev.SMA + SMA_wCurrHostStatusFlags) - | 0x0001, dev.SMA + SMA_wCurrHostStatusFlags); - else - writew(readw(dev.SMA + SMA_wCurrHostStatusFlags) - & ~0x0001, dev.SMA + SMA_wCurrHostStatusFlags); - if (msnd_send_word(&dev, 0, 0, HDEXAR_CAL_A_TO_D) == 0 && - chk_send_dsp_cmd(&dev, HDEX_AUX_REQ) == 0) { - schedule_timeout_interruptible(HZ / 3); - return 0; - } - printk(KERN_WARNING LOGNAME ": ADC calibration failed\n"); - - return -EIO; -} - -static int upload_dsp_code(void) -{ - int ret = 0; - - msnd_outb(HPBLKSEL_0, dev.io + HP_BLKS); -#ifndef HAVE_DSPCODEH - INITCODESIZE = mod_firmware_load(INITCODEFILE, &INITCODE); - if (!INITCODE) { - printk(KERN_ERR LOGNAME ": Error loading " INITCODEFILE); - return -EBUSY; - } - - PERMCODESIZE = mod_firmware_load(PERMCODEFILE, &PERMCODE); - if (!PERMCODE) { - printk(KERN_ERR LOGNAME ": Error loading " PERMCODEFILE); - vfree(INITCODE); - return -EBUSY; - } -#endif - memcpy_toio(dev.base, PERMCODE, PERMCODESIZE); - if (msnd_upload_host(&dev, INITCODE, INITCODESIZE) < 0) { - printk(KERN_WARNING LOGNAME ": Error uploading to DSP\n"); - ret = -ENODEV; - goto out; - } -#ifdef HAVE_DSPCODEH - printk(KERN_INFO LOGNAME ": DSP firmware uploaded (resident)\n"); -#else - printk(KERN_INFO LOGNAME ": DSP firmware uploaded\n"); -#endif - -out: -#ifndef HAVE_DSPCODEH - vfree(INITCODE); - vfree(PERMCODE); -#endif - - return ret; -} - -#ifdef MSND_CLASSIC -static void reset_proteus(void) -{ - msnd_outb(HPPRORESET_ON, dev.io + HP_PROR); - mdelay(TIME_PRO_RESET); - msnd_outb(HPPRORESET_OFF, dev.io + HP_PROR); - mdelay(TIME_PRO_RESET_DONE); -} -#endif - -static int initialize(void) -{ - int err, timeout; - -#ifdef MSND_CLASSIC - msnd_outb(HPWAITSTATE_0, dev.io + HP_WAIT); - msnd_outb(HPBITMODE_16, dev.io + HP_BITM); - - reset_proteus(); -#endif - if ((err = init_sma()) < 0) { - printk(KERN_WARNING LOGNAME ": Cannot initialize SMA\n"); - return err; - } - - if ((err = reset_dsp()) < 0) - return err; - - if ((err = upload_dsp_code()) < 0) { - printk(KERN_WARNING LOGNAME ": Cannot upload DSP code\n"); - return err; - } - - timeout = 200; - while (readw(dev.base)) { - mdelay(1); - if (!timeout--) { - printk(KERN_DEBUG LOGNAME ": DSP reset timeout\n"); - return -EIO; - } - } - - mixer_setup(); - - return 0; -} - -static int dsp_full_reset(void) -{ - int rv; - - if (test_bit(F_RESETTING, &dev.flags) || ++dev.nresets > 10) - return 0; - - set_bit(F_RESETTING, &dev.flags); - printk(KERN_INFO LOGNAME ": DSP reset\n"); - dsp_halt(NULL); /* Unconditionally halt */ - if ((rv = initialize())) - printk(KERN_WARNING LOGNAME ": DSP reset failed\n"); - force_recsrc(dev.recsrc); - dsp_open(NULL); - clear_bit(F_RESETTING, &dev.flags); - - return rv; -} - -static int __init attach_multisound(void) -{ - int err; - - if ((err = request_irq(dev.irq, intr, 0, dev.name, &dev)) < 0) { - printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", dev.irq); - return err; - } - if (request_region(dev.io, dev.numio, dev.name) == NULL) { - free_irq(dev.irq, &dev); - return -EBUSY; - } - - err = dsp_full_reset(); - if (err < 0) { - release_region(dev.io, dev.numio); - free_irq(dev.irq, &dev); - return err; - } - - if ((err = msnd_register(&dev)) < 0) { - printk(KERN_ERR LOGNAME ": Unable to register MultiSound\n"); - release_region(dev.io, dev.numio); - free_irq(dev.irq, &dev); - return err; - } - - if ((dev.dsp_minor = register_sound_dsp(&dev_fileops, -1)) < 0) { - printk(KERN_ERR LOGNAME ": Unable to register DSP operations\n"); - msnd_unregister(&dev); - release_region(dev.io, dev.numio); - free_irq(dev.irq, &dev); - return dev.dsp_minor; - } - - if ((dev.mixer_minor = register_sound_mixer(&dev_fileops, -1)) < 0) { - printk(KERN_ERR LOGNAME ": Unable to register mixer operations\n"); - unregister_sound_mixer(dev.mixer_minor); - msnd_unregister(&dev); - release_region(dev.io, dev.numio); - free_irq(dev.irq, &dev); - return dev.mixer_minor; - } - - dev.ext_midi_dev = dev.hdr_midi_dev = -1; - - disable_irq(dev.irq); - calibrate_adc(dev.play_sample_rate); -#ifndef MSND_CLASSIC - force_recsrc(SOUND_MASK_IMIX); -#endif - - return 0; -} - -static void __exit unload_multisound(void) -{ - release_region(dev.io, dev.numio); - free_irq(dev.irq, &dev); - unregister_sound_mixer(dev.mixer_minor); - unregister_sound_dsp(dev.dsp_minor); - msnd_unregister(&dev); -} - -#ifndef MSND_CLASSIC - -/* Pinnacle/Fiji Logical Device Configuration */ - -static int __init msnd_write_cfg(int cfg, int reg, int value) -{ - msnd_outb(reg, cfg); - msnd_outb(value, cfg + 1); - if (value != msnd_inb(cfg + 1)) { - printk(KERN_ERR LOGNAME ": msnd_write_cfg: I/O error\n"); - return -EIO; - } - return 0; -} - -static int __init msnd_write_cfg_io0(int cfg, int num, WORD io) -{ - if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) - return -EIO; - if (msnd_write_cfg(cfg, IREG_IO0_BASEHI, HIBYTE(io))) - return -EIO; - if (msnd_write_cfg(cfg, IREG_IO0_BASELO, LOBYTE(io))) - return -EIO; - return 0; -} - -static int __init msnd_write_cfg_io1(int cfg, int num, WORD io) -{ - if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) - return -EIO; - if (msnd_write_cfg(cfg, IREG_IO1_BASEHI, HIBYTE(io))) - return -EIO; - if (msnd_write_cfg(cfg, IREG_IO1_BASELO, LOBYTE(io))) - return -EIO; - return 0; -} - -static int __init msnd_write_cfg_irq(int cfg, int num, WORD irq) -{ - if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) - return -EIO; - if (msnd_write_cfg(cfg, IREG_IRQ_NUMBER, LOBYTE(irq))) - return -EIO; - if (msnd_write_cfg(cfg, IREG_IRQ_TYPE, IRQTYPE_EDGE)) - return -EIO; - return 0; -} - -static int __init msnd_write_cfg_mem(int cfg, int num, int mem) -{ - WORD wmem; - - mem >>= 8; - mem &= 0xfff; - wmem = (WORD)mem; - if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) - return -EIO; - if (msnd_write_cfg(cfg, IREG_MEMBASEHI, HIBYTE(wmem))) - return -EIO; - if (msnd_write_cfg(cfg, IREG_MEMBASELO, LOBYTE(wmem))) - return -EIO; - if (wmem && msnd_write_cfg(cfg, IREG_MEMCONTROL, (MEMTYPE_HIADDR | MEMTYPE_16BIT))) - return -EIO; - return 0; -} - -static int __init msnd_activate_logical(int cfg, int num) -{ - if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) - return -EIO; - if (msnd_write_cfg(cfg, IREG_ACTIVATE, LD_ACTIVATE)) - return -EIO; - return 0; -} - -static int __init msnd_write_cfg_logical(int cfg, int num, WORD io0, WORD io1, WORD irq, int mem) -{ - if (msnd_write_cfg(cfg, IREG_LOGDEVICE, num)) - return -EIO; - if (msnd_write_cfg_io0(cfg, num, io0)) - return -EIO; - if (msnd_write_cfg_io1(cfg, num, io1)) - return -EIO; - if (msnd_write_cfg_irq(cfg, num, irq)) - return -EIO; - if (msnd_write_cfg_mem(cfg, num, mem)) - return -EIO; - if (msnd_activate_logical(cfg, num)) - return -EIO; - return 0; -} - -typedef struct msnd_pinnacle_cfg_device { - WORD io0, io1, irq; - int mem; -} msnd_pinnacle_cfg_t[4]; - -static int __init msnd_pinnacle_cfg_devices(int cfg, int reset, msnd_pinnacle_cfg_t device) -{ - int i; - - /* Reset devices if told to */ - if (reset) { - printk(KERN_INFO LOGNAME ": Resetting all devices\n"); - for (i = 0; i < 4; ++i) - if (msnd_write_cfg_logical(cfg, i, 0, 0, 0, 0)) - return -EIO; - } - - /* Configure specified devices */ - for (i = 0; i < 4; ++i) { - - switch (i) { - case 0: /* DSP */ - if (!(device[i].io0 && device[i].irq && device[i].mem)) - continue; - break; - case 1: /* MPU */ - if (!(device[i].io0 && device[i].irq)) - continue; - printk(KERN_INFO LOGNAME - ": Configuring MPU to I/O 0x%x IRQ %d\n", - device[i].io0, device[i].irq); - break; - case 2: /* IDE */ - if (!(device[i].io0 && device[i].io1 && device[i].irq)) - continue; - printk(KERN_INFO LOGNAME - ": Configuring IDE to I/O 0x%x, 0x%x IRQ %d\n", - device[i].io0, device[i].io1, device[i].irq); - break; - case 3: /* Joystick */ - if (!(device[i].io0)) - continue; - printk(KERN_INFO LOGNAME - ": Configuring joystick to I/O 0x%x\n", - device[i].io0); - break; - } - - /* Configure the device */ - if (msnd_write_cfg_logical(cfg, i, device[i].io0, device[i].io1, device[i].irq, device[i].mem)) - return -EIO; - } - - return 0; -} -#endif - -#ifdef MODULE -MODULE_AUTHOR ("Andrew Veliath <andrewtv@usa.net>"); -MODULE_DESCRIPTION ("Turtle Beach " LONGNAME " Linux Driver"); -MODULE_LICENSE("GPL"); - -static int io __initdata = -1; -static int irq __initdata = -1; -static int mem __initdata = -1; -static int write_ndelay __initdata = -1; - -#ifndef MSND_CLASSIC -/* Pinnacle/Fiji non-PnP Config Port */ -static int cfg __initdata = -1; - -/* Extra Peripheral Configuration */ -static int reset __initdata = 0; -static int mpu_io __initdata = 0; -static int mpu_irq __initdata = 0; -static int ide_io0 __initdata = 0; -static int ide_io1 __initdata = 0; -static int ide_irq __initdata = 0; -static int joystick_io __initdata = 0; - -/* If we have the digital daugherboard... */ -static bool digital __initdata = false; -#endif - -static int fifosize __initdata = DEFFIFOSIZE; -static int calibrate_signal __initdata = 0; - -#else /* not a module */ - -static int write_ndelay __initdata = -1; - -#ifdef MSND_CLASSIC -static int io __initdata = CONFIG_MSNDCLAS_IO; -static int irq __initdata = CONFIG_MSNDCLAS_IRQ; -static int mem __initdata = CONFIG_MSNDCLAS_MEM; -#else /* Pinnacle/Fiji */ - -static int io __initdata = CONFIG_MSNDPIN_IO; -static int irq __initdata = CONFIG_MSNDPIN_IRQ; -static int mem __initdata = CONFIG_MSNDPIN_MEM; - -/* Pinnacle/Fiji non-PnP Config Port */ -#ifdef CONFIG_MSNDPIN_NONPNP -# ifndef CONFIG_MSNDPIN_CFG -# define CONFIG_MSNDPIN_CFG 0x250 -# endif -#else -# ifdef CONFIG_MSNDPIN_CFG -# undef CONFIG_MSNDPIN_CFG -# endif -# define CONFIG_MSNDPIN_CFG -1 -#endif -static int cfg __initdata = CONFIG_MSNDPIN_CFG; -/* If not a module, we don't need to bother with reset=1 */ -static int reset; - -/* Extra Peripheral Configuration (Default: Disable) */ -#ifndef CONFIG_MSNDPIN_MPU_IO -# define CONFIG_MSNDPIN_MPU_IO 0 -#endif -static int mpu_io __initdata = CONFIG_MSNDPIN_MPU_IO; - -#ifndef CONFIG_MSNDPIN_MPU_IRQ -# define CONFIG_MSNDPIN_MPU_IRQ 0 -#endif -static int mpu_irq __initdata = CONFIG_MSNDPIN_MPU_IRQ; - -#ifndef CONFIG_MSNDPIN_IDE_IO0 -# define CONFIG_MSNDPIN_IDE_IO0 0 -#endif -static int ide_io0 __initdata = CONFIG_MSNDPIN_IDE_IO0; - -#ifndef CONFIG_MSNDPIN_IDE_IO1 -# define CONFIG_MSNDPIN_IDE_IO1 0 -#endif -static int ide_io1 __initdata = CONFIG_MSNDPIN_IDE_IO1; - -#ifndef CONFIG_MSNDPIN_IDE_IRQ -# define CONFIG_MSNDPIN_IDE_IRQ 0 -#endif -static int ide_irq __initdata = CONFIG_MSNDPIN_IDE_IRQ; - -#ifndef CONFIG_MSNDPIN_JOYSTICK_IO -# define CONFIG_MSNDPIN_JOYSTICK_IO 0 -#endif -static int joystick_io __initdata = CONFIG_MSNDPIN_JOYSTICK_IO; - -/* Have SPDIF (Digital) Daughterboard */ -#ifndef CONFIG_MSNDPIN_DIGITAL -# define CONFIG_MSNDPIN_DIGITAL 0 -#endif -static bool digital __initdata = CONFIG_MSNDPIN_DIGITAL; - -#endif /* MSND_CLASSIC */ - -#ifndef CONFIG_MSND_FIFOSIZE -# define CONFIG_MSND_FIFOSIZE DEFFIFOSIZE -#endif -static int fifosize __initdata = CONFIG_MSND_FIFOSIZE; - -#ifndef CONFIG_MSND_CALSIGNAL -# define CONFIG_MSND_CALSIGNAL 0 -#endif -static int -calibrate_signal __initdata = CONFIG_MSND_CALSIGNAL; -#endif /* MODULE */ - -module_param_hw (io, int, ioport, 0); -module_param_hw (irq, int, irq, 0); -module_param_hw (mem, int, iomem, 0); -module_param (write_ndelay, int, 0); -module_param (fifosize, int, 0); -module_param (calibrate_signal, int, 0); -#ifndef MSND_CLASSIC -module_param (digital, bool, 0); -module_param_hw (cfg, int, ioport, 0); -module_param (reset, int, 0); -module_param_hw (mpu_io, int, ioport, 0); -module_param_hw (mpu_irq, int, irq, 0); -module_param_hw (ide_io0, int, ioport, 0); -module_param_hw (ide_io1, int, ioport, 0); -module_param_hw (ide_irq, int, irq, 0); -module_param_hw (joystick_io, int, ioport, 0); -#endif - -static int __init msnd_init(void) -{ - int err; -#ifndef MSND_CLASSIC - static msnd_pinnacle_cfg_t pinnacle_devs; -#endif /* MSND_CLASSIC */ - - printk(KERN_INFO LOGNAME ": Turtle Beach " LONGNAME " Linux Driver Version " - VERSION ", Copyright (C) 1998 Andrew Veliath\n"); - - if (io == -1 || irq == -1 || mem == -1) - printk(KERN_WARNING LOGNAME ": io, irq and mem must be set\n"); - -#ifdef MSND_CLASSIC - if (io == -1 || - !(io == 0x290 || - io == 0x260 || - io == 0x250 || - io == 0x240 || - io == 0x230 || - io == 0x220 || - io == 0x210 || - io == 0x3e0)) { - printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must be set to 0x210, 0x220, 0x230, 0x240, 0x250, 0x260, 0x290, or 0x3E0\n"); - return -EINVAL; - } -#else - if (io == -1 || - io < 0x100 || - io > 0x3e0 || - (io % 0x10) != 0) { - printk(KERN_ERR LOGNAME ": \"io\" - DSP I/O base must within the range 0x100 to 0x3E0 and must be evenly divisible by 0x10\n"); - return -EINVAL; - } -#endif /* MSND_CLASSIC */ - - if (irq == -1 || - !(irq == 5 || - irq == 7 || - irq == 9 || - irq == 10 || - irq == 11 || - irq == 12)) { - printk(KERN_ERR LOGNAME ": \"irq\" - must be set to 5, 7, 9, 10, 11 or 12\n"); - return -EINVAL; - } - - if (mem == -1 || - !(mem == 0xb0000 || - mem == 0xc8000 || - mem == 0xd0000 || - mem == 0xd8000 || - mem == 0xe0000 || - mem == 0xe8000)) { - printk(KERN_ERR LOGNAME ": \"mem\" - must be set to " - "0xb0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000 or 0xe8000\n"); - return -EINVAL; - } - -#ifdef MSND_CLASSIC - switch (irq) { - case 5: dev.irqid = HPIRQ_5; break; - case 7: dev.irqid = HPIRQ_7; break; - case 9: dev.irqid = HPIRQ_9; break; - case 10: dev.irqid = HPIRQ_10; break; - case 11: dev.irqid = HPIRQ_11; break; - case 12: dev.irqid = HPIRQ_12; break; - } - - switch (mem) { - case 0xb0000: dev.memid = HPMEM_B000; break; - case 0xc8000: dev.memid = HPMEM_C800; break; - case 0xd0000: dev.memid = HPMEM_D000; break; - case 0xd8000: dev.memid = HPMEM_D800; break; - case 0xe0000: dev.memid = HPMEM_E000; break; - case 0xe8000: dev.memid = HPMEM_E800; break; - } -#else - if (cfg == -1) { - printk(KERN_INFO LOGNAME ": Assuming PnP mode\n"); - } else if (cfg != 0x250 && cfg != 0x260 && cfg != 0x270) { - printk(KERN_INFO LOGNAME ": Config port must be 0x250, 0x260 or 0x270 (or unspecified for PnP mode)\n"); - return -EINVAL; - } else { - printk(KERN_INFO LOGNAME ": Non-PnP mode: configuring at port 0x%x\n", cfg); - - /* DSP */ - pinnacle_devs[0].io0 = io; - pinnacle_devs[0].irq = irq; - pinnacle_devs[0].mem = mem; - - /* The following are Pinnacle specific */ - - /* MPU */ - pinnacle_devs[1].io0 = mpu_io; - pinnacle_devs[1].irq = mpu_irq; - - /* IDE */ - pinnacle_devs[2].io0 = ide_io0; - pinnacle_devs[2].io1 = ide_io1; - pinnacle_devs[2].irq = ide_irq; - - /* Joystick */ - pinnacle_devs[3].io0 = joystick_io; - - if (!request_region(cfg, 2, "Pinnacle/Fiji Config")) { - printk(KERN_ERR LOGNAME ": Config port 0x%x conflict\n", cfg); - return -EIO; - } - - if (msnd_pinnacle_cfg_devices(cfg, reset, pinnacle_devs)) { - printk(KERN_ERR LOGNAME ": Device configuration error\n"); - release_region(cfg, 2); - return -EIO; - } - release_region(cfg, 2); - } -#endif /* MSND_CLASSIC */ - - if (fifosize < 16) - fifosize = 16; - - if (fifosize > 1024) - fifosize = 1024; - - set_default_audio_parameters(); -#ifdef MSND_CLASSIC - dev.type = msndClassic; -#else - dev.type = msndPinnacle; -#endif - dev.io = io; - dev.numio = DSP_NUMIO; - dev.irq = irq; - dev.base = ioremap(mem, 0x8000); - dev.fifosize = fifosize * 1024; - dev.calibrate_signal = calibrate_signal ? 1 : 0; - dev.recsrc = 0; - dev.dspq_data_buff = DSPQ_DATA_BUFF; - dev.dspq_buff_size = DSPQ_BUFF_SIZE; - if (write_ndelay == -1) - write_ndelay = CONFIG_MSND_WRITE_NDELAY; - if (write_ndelay) - clear_bit(F_DISABLE_WRITE_NDELAY, &dev.flags); - else - set_bit(F_DISABLE_WRITE_NDELAY, &dev.flags); -#ifndef MSND_CLASSIC - if (digital) - set_bit(F_HAVEDIGITAL, &dev.flags); -#endif - init_waitqueue_head(&dev.writeblock); - init_waitqueue_head(&dev.readblock); - init_waitqueue_head(&dev.writeflush); - msnd_fifo_init(&dev.DAPF); - msnd_fifo_init(&dev.DARF); - spin_lock_init(&dev.lock); - printk(KERN_INFO LOGNAME ": %u byte audio FIFOs (x2)\n", dev.fifosize); - if ((err = msnd_fifo_alloc(&dev.DAPF, dev.fifosize)) < 0) { - printk(KERN_ERR LOGNAME ": Couldn't allocate write FIFO\n"); - return err; - } - - if ((err = msnd_fifo_alloc(&dev.DARF, dev.fifosize)) < 0) { - printk(KERN_ERR LOGNAME ": Couldn't allocate read FIFO\n"); - msnd_fifo_free(&dev.DAPF); - return err; - } - - if ((err = probe_multisound()) < 0) { - printk(KERN_ERR LOGNAME ": Probe failed\n"); - msnd_fifo_free(&dev.DAPF); - msnd_fifo_free(&dev.DARF); - return err; - } - - if ((err = attach_multisound()) < 0) { - printk(KERN_ERR LOGNAME ": Attach failed\n"); - msnd_fifo_free(&dev.DAPF); - msnd_fifo_free(&dev.DARF); - return err; - } - - return 0; -} - -static void __exit msdn_cleanup(void) -{ - unload_multisound(); - msnd_fifo_free(&dev.DAPF); - msnd_fifo_free(&dev.DARF); -} - -module_init(msnd_init); -module_exit(msdn_cleanup); diff --git a/sound/oss/msnd_pinnacle.h b/sound/oss/msnd_pinnacle.h deleted file mode 100644 index c18d66cbbe3f..000000000000 --- a/sound/oss/msnd_pinnacle.h +++ /dev/null @@ -1,246 +0,0 @@ -/********************************************************************* - * - * msnd_pinnacle.h - * - * Turtle Beach MultiSound Sound Card Driver for Linux - * - * Some parts of this header file were derived from the Turtle Beach - * MultiSound Driver Development Kit. - * - * Copyright (C) 1998 Andrew Veliath - * Copyright (C) 1993 Turtle Beach Systems, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - ********************************************************************/ -#ifndef __MSND_PINNACLE_H -#define __MSND_PINNACLE_H - - -#define DSP_NUMIO 0x08 - -#define IREG_LOGDEVICE 0x07 -#define IREG_ACTIVATE 0x30 -#define LD_ACTIVATE 0x01 -#define LD_DISACTIVATE 0x00 -#define IREG_EECONTROL 0x3F -#define IREG_MEMBASEHI 0x40 -#define IREG_MEMBASELO 0x41 -#define IREG_MEMCONTROL 0x42 -#define IREG_MEMRANGEHI 0x43 -#define IREG_MEMRANGELO 0x44 -#define MEMTYPE_8BIT 0x00 -#define MEMTYPE_16BIT 0x02 -#define MEMTYPE_RANGE 0x00 -#define MEMTYPE_HIADDR 0x01 -#define IREG_IO0_BASEHI 0x60 -#define IREG_IO0_BASELO 0x61 -#define IREG_IO1_BASEHI 0x62 -#define IREG_IO1_BASELO 0x63 -#define IREG_IRQ_NUMBER 0x70 -#define IREG_IRQ_TYPE 0x71 -#define IRQTYPE_HIGH 0x02 -#define IRQTYPE_LOW 0x00 -#define IRQTYPE_LEVEL 0x01 -#define IRQTYPE_EDGE 0x00 - -#define HP_DSPR 0x04 -#define HP_BLKS 0x04 - -#define HPDSPRESET_OFF 2 -#define HPDSPRESET_ON 0 - -#define HPBLKSEL_0 2 -#define HPBLKSEL_1 3 - -#define HIMT_DAT_OFF 0x03 - -#define HIDSP_PLAY_UNDER 0x00 -#define HIDSP_INT_PLAY_UNDER 0x01 -#define HIDSP_SSI_TX_UNDER 0x02 -#define HIDSP_RECQ_OVERFLOW 0x08 -#define HIDSP_INT_RECORD_OVER 0x09 -#define HIDSP_SSI_RX_OVERFLOW 0x0a - -#define HIDSP_MIDI_IN_OVER 0x10 - -#define HIDSP_MIDI_FRAME_ERR 0x11 -#define HIDSP_MIDI_PARITY_ERR 0x12 -#define HIDSP_MIDI_OVERRUN_ERR 0x13 - -#define HIDSP_INPUT_CLIPPING 0x20 -#define HIDSP_MIX_CLIPPING 0x30 -#define HIDSP_DAT_IN_OFF 0x21 - -#define HDEXAR_SET_ANA_IN 0 -#define HDEXAR_CLEAR_PEAKS 1 -#define HDEXAR_IN_SET_POTS 2 -#define HDEXAR_AUX_SET_POTS 3 -#define HDEXAR_CAL_A_TO_D 4 -#define HDEXAR_RD_EXT_DSP_BITS 5 - -#define HDEXAR_SET_SYNTH_IN 4 -#define HDEXAR_READ_DAT_IN 5 -#define HDEXAR_MIC_SET_POTS 6 -#define HDEXAR_SET_DAT_IN 7 - -#define HDEXAR_SET_SYNTH_48 8 -#define HDEXAR_SET_SYNTH_44 9 - -#define TIME_PRO_RESET_DONE 0x028A -#define TIME_PRO_SYSEX 0x001E -#define TIME_PRO_RESET 0x0032 - -#define AGND 0x01 -#define SIGNAL 0x02 - -#define EXT_DSP_BIT_DCAL 0x0001 -#define EXT_DSP_BIT_MIDI_CON 0x0002 - -#define BUFFSIZE 0x8000 -#define HOSTQ_SIZE 0x40 - -#define SRAM_CNTL_START 0x7F00 -#define SMA_STRUCT_START 0x7F40 - -#define DAP_BUFF_SIZE 0x2400 -#define DAR_BUFF_SIZE 0x2000 - -#define DAPQ_STRUCT_SIZE 0x10 -#define DARQ_STRUCT_SIZE 0x10 -#define DAPQ_BUFF_SIZE (3 * 0x10) -#define DARQ_BUFF_SIZE (3 * 0x10) -#define MODQ_BUFF_SIZE 0x400 -#define MIDQ_BUFF_SIZE 0x800 -#define DSPQ_BUFF_SIZE 0x5A0 - -#define DAPQ_DATA_BUFF 0x6C00 -#define DARQ_DATA_BUFF 0x6C30 -#define MODQ_DATA_BUFF 0x6C60 -#define MIDQ_DATA_BUFF 0x7060 -#define DSPQ_DATA_BUFF 0x7860 - -#define DAPQ_OFFSET SRAM_CNTL_START -#define DARQ_OFFSET (SRAM_CNTL_START + 0x08) -#define MODQ_OFFSET (SRAM_CNTL_START + 0x10) -#define MIDQ_OFFSET (SRAM_CNTL_START + 0x18) -#define DSPQ_OFFSET (SRAM_CNTL_START + 0x20) - -#define MOP_WAVEHDR 0 -#define MOP_EXTOUT 1 -#define MOP_HWINIT 0xfe -#define MOP_NONE 0xff -#define MOP_MAX 1 - -#define MIP_EXTIN 0 -#define MIP_WAVEHDR 1 -#define MIP_HWINIT 0xfe -#define MIP_MAX 1 - -/* Pinnacle/Fiji SMA Common Data */ -#define SMA_wCurrPlayBytes 0x0000 -#define SMA_wCurrRecordBytes 0x0002 -#define SMA_wCurrPlayVolLeft 0x0004 -#define SMA_wCurrPlayVolRight 0x0006 -#define SMA_wCurrInVolLeft 0x0008 -#define SMA_wCurrInVolRight 0x000a -#define SMA_wCurrMHdrVolLeft 0x000c -#define SMA_wCurrMHdrVolRight 0x000e -#define SMA_dwCurrPlayPitch 0x0010 -#define SMA_dwCurrPlayRate 0x0014 -#define SMA_wCurrMIDIIOPatch 0x0018 -#define SMA_wCurrPlayFormat 0x001a -#define SMA_wCurrPlaySampleSize 0x001c -#define SMA_wCurrPlayChannels 0x001e -#define SMA_wCurrPlaySampleRate 0x0020 -#define SMA_wCurrRecordFormat 0x0022 -#define SMA_wCurrRecordSampleSize 0x0024 -#define SMA_wCurrRecordChannels 0x0026 -#define SMA_wCurrRecordSampleRate 0x0028 -#define SMA_wCurrDSPStatusFlags 0x002a -#define SMA_wCurrHostStatusFlags 0x002c -#define SMA_wCurrInputTagBits 0x002e -#define SMA_wCurrLeftPeak 0x0030 -#define SMA_wCurrRightPeak 0x0032 -#define SMA_bMicPotPosLeft 0x0034 -#define SMA_bMicPotPosRight 0x0035 -#define SMA_bMicPotMaxLeft 0x0036 -#define SMA_bMicPotMaxRight 0x0037 -#define SMA_bInPotPosLeft 0x0038 -#define SMA_bInPotPosRight 0x0039 -#define SMA_bAuxPotPosLeft 0x003a -#define SMA_bAuxPotPosRight 0x003b -#define SMA_bInPotMaxLeft 0x003c -#define SMA_bInPotMaxRight 0x003d -#define SMA_bAuxPotMaxLeft 0x003e -#define SMA_bAuxPotMaxRight 0x003f -#define SMA_bInPotMaxMethod 0x0040 -#define SMA_bAuxPotMaxMethod 0x0041 -#define SMA_wCurrMastVolLeft 0x0042 -#define SMA_wCurrMastVolRight 0x0044 -#define SMA_wCalFreqAtoD 0x0046 -#define SMA_wCurrAuxVolLeft 0x0048 -#define SMA_wCurrAuxVolRight 0x004a -#define SMA_wCurrPlay1VolLeft 0x004c -#define SMA_wCurrPlay1VolRight 0x004e -#define SMA_wCurrPlay2VolLeft 0x0050 -#define SMA_wCurrPlay2VolRight 0x0052 -#define SMA_wCurrPlay3VolLeft 0x0054 -#define SMA_wCurrPlay3VolRight 0x0056 -#define SMA_wCurrPlay4VolLeft 0x0058 -#define SMA_wCurrPlay4VolRight 0x005a -#define SMA_wCurrPlay1PeakLeft 0x005c -#define SMA_wCurrPlay1PeakRight 0x005e -#define SMA_wCurrPlay2PeakLeft 0x0060 -#define SMA_wCurrPlay2PeakRight 0x0062 -#define SMA_wCurrPlay3PeakLeft 0x0064 -#define SMA_wCurrPlay3PeakRight 0x0066 -#define SMA_wCurrPlay4PeakLeft 0x0068 -#define SMA_wCurrPlay4PeakRight 0x006a -#define SMA_wCurrPlayPeakLeft 0x006c -#define SMA_wCurrPlayPeakRight 0x006e -#define SMA_wCurrDATSR 0x0070 -#define SMA_wCurrDATRXCHNL 0x0072 -#define SMA_wCurrDATTXCHNL 0x0074 -#define SMA_wCurrDATRXRate 0x0076 -#define SMA_dwDSPPlayCount 0x0078 -#define SMA__size 0x007c - -#ifdef HAVE_DSPCODEH -# include "pndsperm.c" -# include "pndspini.c" -# define PERMCODE pndsperm -# define INITCODE pndspini -# define PERMCODESIZE sizeof(pndsperm) -# define INITCODESIZE sizeof(pndspini) -#else -# ifndef CONFIG_MSNDPIN_INIT_FILE -# define CONFIG_MSNDPIN_INIT_FILE \ - "/etc/sound/pndspini.bin" -# endif -# ifndef CONFIG_MSNDPIN_PERM_FILE -# define CONFIG_MSNDPIN_PERM_FILE \ - "/etc/sound/pndsperm.bin" -# endif -# define PERMCODEFILE CONFIG_MSNDPIN_PERM_FILE -# define INITCODEFILE CONFIG_MSNDPIN_INIT_FILE -# define PERMCODE dspini -# define INITCODE permini -# define PERMCODESIZE sizeof_dspini -# define INITCODESIZE sizeof_permini -#endif -#define LONGNAME "MultiSound (Pinnacle/Fiji)" - -#endif /* __MSND_PINNACLE_H */ diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c deleted file mode 100644 index f0f5b5be6314..000000000000 --- a/sound/oss/opl3.c +++ /dev/null @@ -1,1255 +0,0 @@ -/* - * sound/oss/opl3.c - * - * A low level driver for Yamaha YM3812 and OPL-3 -chips - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Changes - * Thomas Sailer ioctl code reworked (vmalloc/vfree removed) - * Alan Cox modularisation, fixed sound_mem allocs. - * Christoph Hellwig Adapted to module_init/module_exit - * Arnaldo C. de Melo get rid of check_region, use request_region for - * OPL4, release it on exit, some cleanups. - * - * Status - * Believed to work. Badly needs rewriting a bit to support multiple - * OPL3 devices. - */ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/delay.h> - -/* - * Major improvements to the FM handling 30AUG92 by Rob Hooft, - * hooft@chem.ruu.nl - */ - -#include "sound_config.h" - -#include "opl3_hw.h" - -#define MAX_VOICE 18 -#define OFFS_4OP 11 - -struct voice_info -{ - unsigned char keyon_byte; - long bender; - long bender_range; - unsigned long orig_freq; - unsigned long current_freq; - int volume; - int mode; - int panning; /* 0xffff means not set */ -}; - -struct opl_devinfo -{ - int base; - int left_io, right_io; - int nr_voice; - int lv_map[MAX_VOICE]; - - struct voice_info voc[MAX_VOICE]; - struct voice_alloc_info *v_alloc; - struct channel_info *chn_info; - - struct sbi_instrument i_map[SBFM_MAXINSTR]; - struct sbi_instrument *act_i[MAX_VOICE]; - - struct synth_info fm_info; - - int busy; - int model; - unsigned char cmask; - - int is_opl4; -}; - -static struct opl_devinfo *devc = NULL; - -static int detected_model; - -static int store_instr(int instr_no, struct sbi_instrument *instr); -static void freq_to_fnum(int freq, int *block, int *fnum); -static void opl3_command(int io_addr, unsigned int addr, unsigned int val); -static int opl3_kill_note(int dev, int voice, int note, int velocity); - -static void enter_4op_mode(void) -{ - int i; - static int v4op[MAX_VOICE] = { - 0, 1, 2, 9, 10, 11, 6, 7, 8, 15, 16, 17 - }; - - devc->cmask = 0x3f; /* Connect all possible 4 OP voice operators */ - opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, 0x3f); - - for (i = 0; i < 3; i++) - pv_map[i].voice_mode = 4; - for (i = 3; i < 6; i++) - pv_map[i].voice_mode = 0; - - for (i = 9; i < 12; i++) - pv_map[i].voice_mode = 4; - for (i = 12; i < 15; i++) - pv_map[i].voice_mode = 0; - - for (i = 0; i < 12; i++) - devc->lv_map[i] = v4op[i]; - devc->v_alloc->max_voice = devc->nr_voice = 12; -} - -static int opl3_ioctl(int dev, unsigned int cmd, void __user * arg) -{ - struct sbi_instrument ins; - - switch (cmd) { - case SNDCTL_FM_LOAD_INSTR: - printk(KERN_WARNING "Warning: Obsolete ioctl(SNDCTL_FM_LOAD_INSTR) used. Fix the program.\n"); - if (copy_from_user(&ins, arg, sizeof(ins))) - return -EFAULT; - if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR) { - printk(KERN_WARNING "FM Error: Invalid instrument number %d\n", ins.channel); - return -EINVAL; - } - return store_instr(ins.channel, &ins); - - case SNDCTL_SYNTH_INFO: - devc->fm_info.nr_voices = (devc->nr_voice == 12) ? 6 : devc->nr_voice; - if (copy_to_user(arg, &devc->fm_info, sizeof(devc->fm_info))) - return -EFAULT; - return 0; - - case SNDCTL_SYNTH_MEMAVL: - return 0x7fffffff; - - case SNDCTL_FM_4OP_ENABLE: - if (devc->model == 2) - enter_4op_mode(); - return 0; - - default: - return -EINVAL; - } -} - -static int opl3_detect(int ioaddr) -{ - /* - * This function returns 1 if the FM chip is present at the given I/O port - * The detection algorithm plays with the timer built in the FM chip and - * looks for a change in the status register. - * - * Note! The timers of the FM chip are not connected to AdLib (and compatible) - * boards. - * - * Note2! The chip is initialized if detected. - */ - - unsigned char stat1, signature; - int i; - - if (devc != NULL) - { - printk(KERN_ERR "opl3: Only one OPL3 supported.\n"); - return 0; - } - - devc = kzalloc(sizeof(*devc), GFP_KERNEL); - - if (devc == NULL) - { - printk(KERN_ERR "opl3: Can't allocate memory for the device control " - "structure \n "); - return 0; - } - - strcpy(devc->fm_info.name, "OPL2"); - - if (!request_region(ioaddr, 4, devc->fm_info.name)) { - printk(KERN_WARNING "opl3: I/O port 0x%x already in use\n", ioaddr); - goto cleanup_devc; - } - - devc->base = ioaddr; - - /* Reset timers 1 and 2 */ - opl3_command(ioaddr, TIMER_CONTROL_REGISTER, TIMER1_MASK | TIMER2_MASK); - - /* Reset the IRQ of the FM chip */ - opl3_command(ioaddr, TIMER_CONTROL_REGISTER, IRQ_RESET); - - signature = stat1 = inb(ioaddr); /* Status register */ - - if (signature != 0x00 && signature != 0x06 && signature != 0x02 && - signature != 0x0f) - { - MDB(printk(KERN_INFO "OPL3 not detected %x\n", signature)); - goto cleanup_region; - } - - if (signature == 0x06) /* OPL2 */ - { - detected_model = 2; - } - else if (signature == 0x00 || signature == 0x0f) /* OPL3 or OPL4 */ - { - unsigned char tmp; - - detected_model = 3; - - /* - * Detect availability of OPL4 (_experimental_). Works probably - * only after a cold boot. In addition the OPL4 port - * of the chip may not be connected to the PC bus at all. - */ - - opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, 0x00); - opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, OPL3_ENABLE | OPL4_ENABLE); - - if ((tmp = inb(ioaddr)) == 0x02) /* Have a OPL4 */ - { - detected_model = 4; - } - - if (request_region(ioaddr - 8, 2, "OPL4")) /* OPL4 port was free */ - { - int tmp; - - outb((0x02), ioaddr - 8); /* Select OPL4 ID register */ - udelay(10); - tmp = inb(ioaddr - 7); /* Read it */ - udelay(10); - - if (tmp == 0x20) /* OPL4 should return 0x20 here */ - { - detected_model = 4; - outb((0xF8), ioaddr - 8); /* Select OPL4 FM mixer control */ - udelay(10); - outb((0x1B), ioaddr - 7); /* Write value */ - udelay(10); - } - else - { /* release OPL4 port */ - release_region(ioaddr - 8, 2); - detected_model = 3; - } - } - opl3_command(ioaddr + 2, OPL3_MODE_REGISTER, 0); - } - for (i = 0; i < 9; i++) - opl3_command(ioaddr, KEYON_BLOCK + i, 0); /* - * Note off - */ - - opl3_command(ioaddr, TEST_REGISTER, ENABLE_WAVE_SELECT); - opl3_command(ioaddr, PERCOSSION_REGISTER, 0x00); /* - * Melodic mode. - */ - return 1; -cleanup_region: - release_region(ioaddr, 4); -cleanup_devc: - kfree(devc); - devc = NULL; - return 0; -} - -static int opl3_kill_note (int devno, int voice, int note, int velocity) -{ - struct physical_voice_info *map; - - if (voice < 0 || voice >= devc->nr_voice) - return 0; - - devc->v_alloc->map[voice] = 0; - - map = &pv_map[devc->lv_map[voice]]; - - if (map->voice_mode == 0) - return 0; - - opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, devc->voc[voice].keyon_byte & ~0x20); - devc->voc[voice].keyon_byte = 0; - devc->voc[voice].bender = 0; - devc->voc[voice].volume = 64; - devc->voc[voice].panning = 0xffff; /* Not set */ - devc->voc[voice].bender_range = 200; - devc->voc[voice].orig_freq = 0; - devc->voc[voice].current_freq = 0; - devc->voc[voice].mode = 0; - return 0; -} - -#define HIHAT 0 -#define CYMBAL 1 -#define TOMTOM 2 -#define SNARE 3 -#define BDRUM 4 -#define UNDEFINED TOMTOM -#define DEFAULT TOMTOM - -static int store_instr(int instr_no, struct sbi_instrument *instr) -{ - if (instr->key != FM_PATCH && (instr->key != OPL3_PATCH || devc->model != 2)) - printk(KERN_WARNING "FM warning: Invalid patch format field (key) 0x%x\n", instr->key); - memcpy((char *) &(devc->i_map[instr_no]), (char *) instr, sizeof(*instr)); - return 0; -} - -static int opl3_set_instr (int dev, int voice, int instr_no) -{ - if (voice < 0 || voice >= devc->nr_voice) - return 0; - if (instr_no < 0 || instr_no >= SBFM_MAXINSTR) - instr_no = 0; /* Acoustic piano (usually) */ - - devc->act_i[voice] = &devc->i_map[instr_no]; - return 0; -} - -/* - * The next table looks magical, but it certainly is not. Its values have - * been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception - * for i=0. This log-table converts a linear volume-scaling (0..127) to a - * logarithmic scaling as present in the FM-synthesizer chips. so : Volume - * 64 = 0 db = relative volume 0 and: Volume 32 = -6 db = relative - * volume -8 it was implemented as a table because it is only 128 bytes and - * it saves a lot of log() calculations. (RH) - */ - -static char fm_volume_table[128] = -{ - -64, -48, -40, -35, -32, -29, -27, -26, - -24, -23, -21, -20, -19, -18, -18, -17, - -16, -15, -15, -14, -13, -13, -12, -12, - -11, -11, -10, -10, -10, -9, -9, -8, - -8, -8, -7, -7, -7, -6, -6, -6, - -5, -5, -5, -5, -4, -4, -4, -4, - -3, -3, -3, -3, -2, -2, -2, -2, - -2, -1, -1, -1, -1, 0, 0, 0, - 0, 0, 0, 1, 1, 1, 1, 1, - 1, 2, 2, 2, 2, 2, 2, 2, - 3, 3, 3, 3, 3, 3, 3, 4, - 4, 4, 4, 4, 4, 4, 4, 5, - 5, 5, 5, 5, 5, 5, 5, 5, - 6, 6, 6, 6, 6, 6, 6, 6, - 6, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 8, 8, 8, 8, 8 -}; - -static void calc_vol(unsigned char *regbyte, int volume, int main_vol) -{ - int level = (~*regbyte & 0x3f); - - if (main_vol > 127) - main_vol = 127; - volume = (volume * main_vol) / 127; - - if (level) - level += fm_volume_table[volume]; - - if (level > 0x3f) - level = 0x3f; - if (level < 0) - level = 0; - - *regbyte = (*regbyte & 0xc0) | (~level & 0x3f); -} - -static void set_voice_volume(int voice, int volume, int main_vol) -{ - unsigned char vol1, vol2, vol3, vol4; - struct sbi_instrument *instr; - struct physical_voice_info *map; - - if (voice < 0 || voice >= devc->nr_voice) - return; - - map = &pv_map[devc->lv_map[voice]]; - instr = devc->act_i[voice]; - - if (!instr) - instr = &devc->i_map[0]; - - if (instr->channel < 0) - return; - - if (devc->voc[voice].mode == 0) - return; - - if (devc->voc[voice].mode == 2) - { - vol1 = instr->operators[2]; - vol2 = instr->operators[3]; - if ((instr->operators[10] & 0x01)) - { - calc_vol(&vol1, volume, main_vol); - calc_vol(&vol2, volume, main_vol); - } - else - { - calc_vol(&vol2, volume, main_vol); - } - opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], vol1); - opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], vol2); - } - else - { /* - * 4 OP voice - */ - int connection; - - vol1 = instr->operators[2]; - vol2 = instr->operators[3]; - vol3 = instr->operators[OFFS_4OP + 2]; - vol4 = instr->operators[OFFS_4OP + 3]; - - /* - * The connection method for 4 OP devc->voc is defined by the rightmost - * bits at the offsets 10 and 10+OFFS_4OP - */ - - connection = ((instr->operators[10] & 0x01) << 1) | (instr->operators[10 + OFFS_4OP] & 0x01); - - switch (connection) - { - case 0: - calc_vol(&vol4, volume, main_vol); - break; - - case 1: - calc_vol(&vol2, volume, main_vol); - calc_vol(&vol4, volume, main_vol); - break; - - case 2: - calc_vol(&vol1, volume, main_vol); - calc_vol(&vol4, volume, main_vol); - break; - - case 3: - calc_vol(&vol1, volume, main_vol); - calc_vol(&vol3, volume, main_vol); - calc_vol(&vol4, volume, main_vol); - break; - - default: - ; - } - opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], vol1); - opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], vol2); - opl3_command(map->ioaddr, KSL_LEVEL + map->op[2], vol3); - opl3_command(map->ioaddr, KSL_LEVEL + map->op[3], vol4); - } -} - -static int opl3_start_note (int dev, int voice, int note, int volume) -{ - unsigned char data, fpc; - int block, fnum, freq, voice_mode, pan; - struct sbi_instrument *instr; - struct physical_voice_info *map; - - if (voice < 0 || voice >= devc->nr_voice) - return 0; - - map = &pv_map[devc->lv_map[voice]]; - pan = devc->voc[voice].panning; - - if (map->voice_mode == 0) - return 0; - - if (note == 255) /* - * Just change the volume - */ - { - set_voice_volume(voice, volume, devc->voc[voice].volume); - return 0; - } - - /* - * Kill previous note before playing - */ - - opl3_command(map->ioaddr, KSL_LEVEL + map->op[1], 0xff); /* - * Carrier - * volume to - * min - */ - opl3_command(map->ioaddr, KSL_LEVEL + map->op[0], 0xff); /* - * Modulator - * volume to - */ - - if (map->voice_mode == 4) - { - opl3_command(map->ioaddr, KSL_LEVEL + map->op[2], 0xff); - opl3_command(map->ioaddr, KSL_LEVEL + map->op[3], 0xff); - } - - opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, 0x00); /* - * Note - * off - */ - - instr = devc->act_i[voice]; - - if (!instr) - instr = &devc->i_map[0]; - - if (instr->channel < 0) - { - printk(KERN_WARNING "opl3: Initializing voice %d with undefined instrument\n", voice); - return 0; - } - - if (map->voice_mode == 2 && instr->key == OPL3_PATCH) - return 0; /* - * Cannot play - */ - - voice_mode = map->voice_mode; - - if (voice_mode == 4) - { - int voice_shift; - - voice_shift = (map->ioaddr == devc->left_io) ? 0 : 3; - voice_shift += map->voice_num; - - if (instr->key != OPL3_PATCH) /* - * Just 2 OP patch - */ - { - voice_mode = 2; - devc->cmask &= ~(1 << voice_shift); - } - else - { - devc->cmask |= (1 << voice_shift); - } - - opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, devc->cmask); - } - - /* - * Set Sound Characteristics - */ - - opl3_command(map->ioaddr, AM_VIB + map->op[0], instr->operators[0]); - opl3_command(map->ioaddr, AM_VIB + map->op[1], instr->operators[1]); - - /* - * Set Attack/Decay - */ - - opl3_command(map->ioaddr, ATTACK_DECAY + map->op[0], instr->operators[4]); - opl3_command(map->ioaddr, ATTACK_DECAY + map->op[1], instr->operators[5]); - - /* - * Set Sustain/Release - */ - - opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[0], instr->operators[6]); - opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[1], instr->operators[7]); - - /* - * Set Wave Select - */ - - opl3_command(map->ioaddr, WAVE_SELECT + map->op[0], instr->operators[8]); - opl3_command(map->ioaddr, WAVE_SELECT + map->op[1], instr->operators[9]); - - /* - * Set Feedback/Connection - */ - - fpc = instr->operators[10]; - - if (pan != 0xffff) - { - fpc &= ~STEREO_BITS; - if (pan < -64) - fpc |= VOICE_TO_LEFT; - else - if (pan > 64) - fpc |= VOICE_TO_RIGHT; - else - fpc |= (VOICE_TO_LEFT | VOICE_TO_RIGHT); - } - - if (!(fpc & 0x30)) - fpc |= 0x30; /* - * Ensure that at least one chn is enabled - */ - opl3_command(map->ioaddr, FEEDBACK_CONNECTION + map->voice_num, fpc); - - /* - * If the voice is a 4 OP one, initialize the operators 3 and 4 also - */ - - if (voice_mode == 4) - { - /* - * Set Sound Characteristics - */ - - opl3_command(map->ioaddr, AM_VIB + map->op[2], instr->operators[OFFS_4OP + 0]); - opl3_command(map->ioaddr, AM_VIB + map->op[3], instr->operators[OFFS_4OP + 1]); - - /* - * Set Attack/Decay - */ - - opl3_command(map->ioaddr, ATTACK_DECAY + map->op[2], instr->operators[OFFS_4OP + 4]); - opl3_command(map->ioaddr, ATTACK_DECAY + map->op[3], instr->operators[OFFS_4OP + 5]); - - /* - * Set Sustain/Release - */ - - opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[2], instr->operators[OFFS_4OP + 6]); - opl3_command(map->ioaddr, SUSTAIN_RELEASE + map->op[3], instr->operators[OFFS_4OP + 7]); - - /* - * Set Wave Select - */ - - opl3_command(map->ioaddr, WAVE_SELECT + map->op[2], instr->operators[OFFS_4OP + 8]); - opl3_command(map->ioaddr, WAVE_SELECT + map->op[3], instr->operators[OFFS_4OP + 9]); - - /* - * Set Feedback/Connection - */ - - fpc = instr->operators[OFFS_4OP + 10]; - if (!(fpc & 0x30)) - fpc |= 0x30; /* - * Ensure that at least one chn is enabled - */ - opl3_command(map->ioaddr, FEEDBACK_CONNECTION + map->voice_num + 3, fpc); - } - - devc->voc[voice].mode = voice_mode; - set_voice_volume(voice, volume, devc->voc[voice].volume); - - freq = devc->voc[voice].orig_freq = note_to_freq(note) / 1000; - - /* - * Since the pitch bender may have been set before playing the note, we - * have to calculate the bending now. - */ - - freq = compute_finetune(devc->voc[voice].orig_freq, devc->voc[voice].bender, devc->voc[voice].bender_range, 0); - devc->voc[voice].current_freq = freq; - - freq_to_fnum(freq, &block, &fnum); - - /* - * Play note - */ - - data = fnum & 0xff; /* - * Least significant bits of fnumber - */ - opl3_command(map->ioaddr, FNUM_LOW + map->voice_num, data); - - data = 0x20 | ((block & 0x7) << 2) | ((fnum >> 8) & 0x3); - devc->voc[voice].keyon_byte = data; - opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, data); - if (voice_mode == 4) - opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num + 3, data); - - return 0; -} - -static void freq_to_fnum (int freq, int *block, int *fnum) -{ - int f, octave; - - /* - * Converts the note frequency to block and fnum values for the FM chip - */ - /* - * First try to compute the block -value (octave) where the note belongs - */ - - f = freq; - - octave = 5; - - if (f == 0) - octave = 0; - else if (f < 261) - { - while (f < 261) - { - octave--; - f <<= 1; - } - } - else if (f > 493) - { - while (f > 493) - { - octave++; - f >>= 1; - } - } - - if (octave > 7) - octave = 7; - - *fnum = freq * (1 << (20 - octave)) / 49716; - *block = octave; -} - -static void opl3_command (int io_addr, unsigned int addr, unsigned int val) -{ - int i; - - /* - * The original 2-OP synth requires a quite long delay after writing to a - * register. The OPL-3 survives with just two INBs - */ - - outb(((unsigned char) (addr & 0xff)), io_addr); - - if (devc->model != 2) - udelay(10); - else - for (i = 0; i < 2; i++) - inb(io_addr); - - outb(((unsigned char) (val & 0xff)), io_addr + 1); - - if (devc->model != 2) - udelay(30); - else - for (i = 0; i < 2; i++) - inb(io_addr); -} - -static void opl3_reset(int devno) -{ - int i; - - for (i = 0; i < 18; i++) - devc->lv_map[i] = i; - - for (i = 0; i < devc->nr_voice; i++) - { - opl3_command(pv_map[devc->lv_map[i]].ioaddr, - KSL_LEVEL + pv_map[devc->lv_map[i]].op[0], 0xff); - - opl3_command(pv_map[devc->lv_map[i]].ioaddr, - KSL_LEVEL + pv_map[devc->lv_map[i]].op[1], 0xff); - - if (pv_map[devc->lv_map[i]].voice_mode == 4) - { - opl3_command(pv_map[devc->lv_map[i]].ioaddr, - KSL_LEVEL + pv_map[devc->lv_map[i]].op[2], 0xff); - - opl3_command(pv_map[devc->lv_map[i]].ioaddr, - KSL_LEVEL + pv_map[devc->lv_map[i]].op[3], 0xff); - } - - opl3_kill_note(devno, i, 0, 64); - } - - if (devc->model == 2) - { - devc->v_alloc->max_voice = devc->nr_voice = 18; - - for (i = 0; i < 18; i++) - pv_map[i].voice_mode = 2; - - } -} - -static int opl3_open(int dev, int mode) -{ - int i; - - if (devc->busy) - return -EBUSY; - devc->busy = 1; - - devc->v_alloc->max_voice = devc->nr_voice = (devc->model == 2) ? 18 : 9; - devc->v_alloc->timestamp = 0; - - for (i = 0; i < 18; i++) - { - devc->v_alloc->map[i] = 0; - devc->v_alloc->alloc_times[i] = 0; - } - - devc->cmask = 0x00; /* - * Just 2 OP mode - */ - if (devc->model == 2) - opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, devc->cmask); - return 0; -} - -static void opl3_close(int dev) -{ - devc->busy = 0; - devc->v_alloc->max_voice = devc->nr_voice = (devc->model == 2) ? 18 : 9; - - devc->fm_info.nr_drums = 0; - devc->fm_info.perc_mode = 0; - - opl3_reset(dev); -} - -static void opl3_hw_control(int dev, unsigned char *event) -{ -} - -static int opl3_load_patch(int dev, int format, const char __user *addr, - int count, int pmgr_flag) -{ - struct sbi_instrument ins; - - if (count <sizeof(ins)) - { - printk(KERN_WARNING "FM Error: Patch record too short\n"); - return -EINVAL; - } - - if (copy_from_user(&ins, addr, sizeof(ins))) - return -EFAULT; - - if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR) - { - printk(KERN_WARNING "FM Error: Invalid instrument number %d\n", ins.channel); - return -EINVAL; - } - ins.key = format; - - return store_instr(ins.channel, &ins); -} - -static void opl3_panning(int dev, int voice, int value) -{ - - if (voice < 0 || voice >= devc->nr_voice) - return; - - devc->voc[voice].panning = value; -} - -static void opl3_volume_method(int dev, int mode) -{ -} - -#define SET_VIBRATO(cell) { \ - tmp = instr->operators[(cell-1)+(((cell-1)/2)*OFFS_4OP)]; \ - if (pressure > 110) \ - tmp |= 0x40; /* Vibrato on */ \ - opl3_command (map->ioaddr, AM_VIB + map->op[cell-1], tmp);} - -static void opl3_aftertouch(int dev, int voice, int pressure) -{ - int tmp; - struct sbi_instrument *instr; - struct physical_voice_info *map; - - if (voice < 0 || voice >= devc->nr_voice) - return; - - map = &pv_map[devc->lv_map[voice]]; - - if (map->voice_mode == 0) - return; - - /* - * Adjust the amount of vibrato depending the pressure - */ - - instr = devc->act_i[voice]; - - if (!instr) - instr = &devc->i_map[0]; - - if (devc->voc[voice].mode == 4) - { - int connection = ((instr->operators[10] & 0x01) << 1) | (instr->operators[10 + OFFS_4OP] & 0x01); - - switch (connection) - { - case 0: - SET_VIBRATO(4); - break; - - case 1: - SET_VIBRATO(2); - SET_VIBRATO(4); - break; - - case 2: - SET_VIBRATO(1); - SET_VIBRATO(4); - break; - - case 3: - SET_VIBRATO(1); - SET_VIBRATO(3); - SET_VIBRATO(4); - break; - - } - /* - * Not implemented yet - */ - } - else - { - SET_VIBRATO(1); - - if ((instr->operators[10] & 0x01)) /* - * Additive synthesis - */ - SET_VIBRATO(2); - } -} - -#undef SET_VIBRATO - -static void bend_pitch(int dev, int voice, int value) -{ - unsigned char data; - int block, fnum, freq; - struct physical_voice_info *map; - - map = &pv_map[devc->lv_map[voice]]; - - if (map->voice_mode == 0) - return; - - devc->voc[voice].bender = value; - if (!value) - return; - if (!(devc->voc[voice].keyon_byte & 0x20)) - return; /* - * Not keyed on - */ - - freq = compute_finetune(devc->voc[voice].orig_freq, devc->voc[voice].bender, devc->voc[voice].bender_range, 0); - devc->voc[voice].current_freq = freq; - - freq_to_fnum(freq, &block, &fnum); - - data = fnum & 0xff; /* - * Least significant bits of fnumber - */ - opl3_command(map->ioaddr, FNUM_LOW + map->voice_num, data); - - data = 0x20 | ((block & 0x7) << 2) | ((fnum >> 8) & 0x3); - devc->voc[voice].keyon_byte = data; - opl3_command(map->ioaddr, KEYON_BLOCK + map->voice_num, data); -} - -static void opl3_controller (int dev, int voice, int ctrl_num, int value) -{ - if (voice < 0 || voice >= devc->nr_voice) - return; - - switch (ctrl_num) - { - case CTRL_PITCH_BENDER: - bend_pitch(dev, voice, value); - break; - - case CTRL_PITCH_BENDER_RANGE: - devc->voc[voice].bender_range = value; - break; - - case CTL_MAIN_VOLUME: - devc->voc[voice].volume = value / 128; - break; - - case CTL_PAN: - devc->voc[voice].panning = (value * 2) - 128; - break; - } -} - -static void opl3_bender(int dev, int voice, int value) -{ - if (voice < 0 || voice >= devc->nr_voice) - return; - - bend_pitch(dev, voice, value - 8192); -} - -static int opl3_alloc_voice(int dev, int chn, int note, struct voice_alloc_info *alloc) -{ - int i, p, best, first, avail, best_time = 0x7fffffff; - struct sbi_instrument *instr; - int is4op; - int instr_no; - - if (chn < 0 || chn > 15) - instr_no = 0; - else - instr_no = devc->chn_info[chn].pgm_num; - - instr = &devc->i_map[instr_no]; - if (instr->channel < 0 || /* Instrument not loaded */ - devc->nr_voice != 12) /* Not in 4 OP mode */ - is4op = 0; - else if (devc->nr_voice == 12) /* 4 OP mode */ - is4op = (instr->key == OPL3_PATCH); - else - is4op = 0; - - if (is4op) - { - first = p = 0; - avail = 6; - } - else - { - if (devc->nr_voice == 12) /* 4 OP mode. Use the '2 OP only' operators first */ - first = p = 6; - else - first = p = 0; - avail = devc->nr_voice; - } - - /* - * Now try to find a free voice - */ - best = first; - - for (i = 0; i < avail; i++) - { - if (alloc->map[p] == 0) - { - return p; - } - if (alloc->alloc_times[p] < best_time) /* Find oldest playing note */ - { - best_time = alloc->alloc_times[p]; - best = p; - } - p = (p + 1) % avail; - } - - /* - * Insert some kind of priority mechanism here. - */ - - if (best < 0) - best = 0; - if (best > devc->nr_voice) - best -= devc->nr_voice; - - return best; /* All devc->voc in use. Select the first one. */ -} - -static void opl3_setup_voice(int dev, int voice, int chn) -{ - struct channel_info *info; - - if (voice < 0 || voice >= devc->nr_voice) - return; - - if (chn < 0 || chn > 15) - return; - - info = &synth_devs[dev]->chn_info[chn]; - - opl3_set_instr(dev, voice, info->pgm_num); - - devc->voc[voice].bender = 0; - devc->voc[voice].bender_range = info->bender_range; - devc->voc[voice].volume = info->controllers[CTL_MAIN_VOLUME]; - devc->voc[voice].panning = (info->controllers[CTL_PAN] * 2) - 128; -} - -static struct synth_operations opl3_operations = -{ - .owner = THIS_MODULE, - .id = "OPL", - .info = NULL, - .midi_dev = 0, - .synth_type = SYNTH_TYPE_FM, - .synth_subtype = FM_TYPE_ADLIB, - .open = opl3_open, - .close = opl3_close, - .ioctl = opl3_ioctl, - .kill_note = opl3_kill_note, - .start_note = opl3_start_note, - .set_instr = opl3_set_instr, - .reset = opl3_reset, - .hw_control = opl3_hw_control, - .load_patch = opl3_load_patch, - .aftertouch = opl3_aftertouch, - .controller = opl3_controller, - .panning = opl3_panning, - .volume_method = opl3_volume_method, - .bender = opl3_bender, - .alloc_voice = opl3_alloc_voice, - .setup_voice = opl3_setup_voice -}; - -static int opl3_init(int ioaddr, struct module *owner) -{ - int i; - int me; - - if (devc == NULL) - { - printk(KERN_ERR "opl3: Device control structure not initialized.\n"); - return -1; - } - - if ((me = sound_alloc_synthdev()) == -1) - { - printk(KERN_WARNING "opl3: Too many synthesizers\n"); - return -1; - } - - devc->nr_voice = 9; - - devc->fm_info.device = 0; - devc->fm_info.synth_type = SYNTH_TYPE_FM; - devc->fm_info.synth_subtype = FM_TYPE_ADLIB; - devc->fm_info.perc_mode = 0; - devc->fm_info.nr_voices = 9; - devc->fm_info.nr_drums = 0; - devc->fm_info.instr_bank_size = SBFM_MAXINSTR; - devc->fm_info.capabilities = 0; - devc->left_io = ioaddr; - devc->right_io = ioaddr + 2; - - if (detected_model <= 2) - devc->model = 1; - else - { - devc->model = 2; - if (detected_model == 4) - devc->is_opl4 = 1; - } - - opl3_operations.info = &devc->fm_info; - - synth_devs[me] = &opl3_operations; - - if (owner) - synth_devs[me]->owner = owner; - - sequencer_init(); - devc->v_alloc = &opl3_operations.alloc; - devc->chn_info = &opl3_operations.chn_info[0]; - - if (devc->model == 2) - { - if (devc->is_opl4) - strcpy(devc->fm_info.name, "Yamaha OPL4/OPL3 FM"); - else - strcpy(devc->fm_info.name, "Yamaha OPL3"); - - devc->v_alloc->max_voice = devc->nr_voice = 18; - devc->fm_info.nr_drums = 0; - devc->fm_info.synth_subtype = FM_TYPE_OPL3; - devc->fm_info.capabilities |= SYNTH_CAP_OPL3; - - for (i = 0; i < 18; i++) - { - if (pv_map[i].ioaddr == USE_LEFT) - pv_map[i].ioaddr = devc->left_io; - else - pv_map[i].ioaddr = devc->right_io; - } - opl3_command(devc->right_io, OPL3_MODE_REGISTER, OPL3_ENABLE); - opl3_command(devc->right_io, CONNECTION_SELECT_REGISTER, 0x00); - } - else - { - strcpy(devc->fm_info.name, "Yamaha OPL2"); - devc->v_alloc->max_voice = devc->nr_voice = 9; - devc->fm_info.nr_drums = 0; - - for (i = 0; i < 18; i++) - pv_map[i].ioaddr = devc->left_io; - } - conf_printf2(devc->fm_info.name, ioaddr, 0, -1, -1); - - for (i = 0; i < SBFM_MAXINSTR; i++) - devc->i_map[i].channel = -1; - - return me; -} - -static int me; - -static int io = -1; - -module_param_hw(io, int, ioport, 0); - -static int __init init_opl3 (void) -{ - printk(KERN_INFO "YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996\n"); - - if (io != -1) /* User loading pure OPL3 module */ - { - if (!opl3_detect(io)) - { - return -ENODEV; - } - - me = opl3_init(io, THIS_MODULE); - } - - return 0; -} - -static void __exit cleanup_opl3(void) -{ - if (devc && io != -1) - { - if (devc->base) { - release_region(devc->base,4); - if (devc->is_opl4) - release_region(devc->base - 8, 2); - } - kfree(devc); - devc = NULL; - sound_unload_synthdev(me); - } -} - -module_init(init_opl3); -module_exit(cleanup_opl3); - -#ifndef MODULE -static int __init setup_opl3(char *str) -{ - /* io */ - int ints[2]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - - return 1; -} - -__setup("opl3=", setup_opl3); -#endif -MODULE_LICENSE("GPL"); diff --git a/sound/oss/opl3_hw.h b/sound/oss/opl3_hw.h deleted file mode 100644 index 8b11c893e869..000000000000 --- a/sound/oss/opl3_hw.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * opl3_hw.h - Definitions of the OPL-3 registers - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * The OPL-3 mode is switched on by writing 0x01, to the offset 5 - * of the right side. - * - * Another special register at the right side is at offset 4. It contains - * a bit mask defining which voices are used as 4 OP voices. - * - * The percussive mode is implemented in the left side only. - * - * With the above exceptions the both sides can be operated independently. - * - * A 4 OP voice can be created by setting the corresponding - * bit at offset 4 of the right side. - * - * For example setting the rightmost bit (0x01) changes the - * first voice on the right side to the 4 OP mode. The fourth - * voice is made inaccessible. - * - * If a voice is set to the 2 OP mode, it works like 2 OP modes - * of the original YM3812 (AdLib). In addition the voice can - * be connected the left, right or both stereo channels. It can - * even be left unconnected. This works with 4 OP voices also. - * - * The stereo connection bits are located in the FEEDBACK_CONNECTION - * register of the voice (0xC0-0xC8). In 4 OP voices these bits are - * in the second half of the voice. - */ - -/* - * Register numbers for the global registers - */ - -#define TEST_REGISTER 0x01 -#define ENABLE_WAVE_SELECT 0x20 - -#define TIMER1_REGISTER 0x02 -#define TIMER2_REGISTER 0x03 -#define TIMER_CONTROL_REGISTER 0x04 /* Left side */ -#define IRQ_RESET 0x80 -#define TIMER1_MASK 0x40 -#define TIMER2_MASK 0x20 -#define TIMER1_START 0x01 -#define TIMER2_START 0x02 - -#define CONNECTION_SELECT_REGISTER 0x04 /* Right side */ -#define RIGHT_4OP_0 0x01 -#define RIGHT_4OP_1 0x02 -#define RIGHT_4OP_2 0x04 -#define LEFT_4OP_0 0x08 -#define LEFT_4OP_1 0x10 -#define LEFT_4OP_2 0x20 - -#define OPL3_MODE_REGISTER 0x05 /* Right side */ -#define OPL3_ENABLE 0x01 -#define OPL4_ENABLE 0x02 - -#define KBD_SPLIT_REGISTER 0x08 /* Left side */ -#define COMPOSITE_SINE_WAVE_MODE 0x80 /* Don't use with OPL-3? */ -#define KEYBOARD_SPLIT 0x40 - -#define PERCOSSION_REGISTER 0xbd /* Left side only */ -#define TREMOLO_DEPTH 0x80 -#define VIBRATO_DEPTH 0x40 -#define PERCOSSION_ENABLE 0x20 -#define BASSDRUM_ON 0x10 -#define SNAREDRUM_ON 0x08 -#define TOMTOM_ON 0x04 -#define CYMBAL_ON 0x02 -#define HIHAT_ON 0x01 - -/* - * Offsets to the register banks for operators. To get the - * register number just add the operator offset to the bank offset - * - * AM/VIB/EG/KSR/Multiple (0x20 to 0x35) - */ -#define AM_VIB 0x20 -#define TREMOLO_ON 0x80 -#define VIBRATO_ON 0x40 -#define SUSTAIN_ON 0x20 -#define KSR 0x10 /* Key scaling rate */ -#define MULTIPLE_MASK 0x0f /* Frequency multiplier */ - - /* - * KSL/Total level (0x40 to 0x55) - */ -#define KSL_LEVEL 0x40 -#define KSL_MASK 0xc0 /* Envelope scaling bits */ -#define TOTAL_LEVEL_MASK 0x3f /* Strength (volume) of OP */ - -/* - * Attack / Decay rate (0x60 to 0x75) - */ -#define ATTACK_DECAY 0x60 -#define ATTACK_MASK 0xf0 -#define DECAY_MASK 0x0f - -/* - * Sustain level / Release rate (0x80 to 0x95) - */ -#define SUSTAIN_RELEASE 0x80 -#define SUSTAIN_MASK 0xf0 -#define RELEASE_MASK 0x0f - -/* - * Wave select (0xE0 to 0xF5) - */ -#define WAVE_SELECT 0xe0 - -/* - * Offsets to the register banks for voices. Just add to the - * voice number to get the register number. - * - * F-Number low bits (0xA0 to 0xA8). - */ -#define FNUM_LOW 0xa0 - -/* - * F-number high bits / Key on / Block (octave) (0xB0 to 0xB8) - */ -#define KEYON_BLOCK 0xb0 -#define KEYON_BIT 0x20 -#define BLOCKNUM_MASK 0x1c -#define FNUM_HIGH_MASK 0x03 - -/* - * Feedback / Connection (0xc0 to 0xc8) - * - * These registers have two new bits when the OPL-3 mode - * is selected. These bits controls connecting the voice - * to the stereo channels. For 4 OP voices this bit is - * defined in the second half of the voice (add 3 to the - * register offset). - * - * For 4 OP voices the connection bit is used in the - * both halves (gives 4 ways to connect the operators). - */ -#define FEEDBACK_CONNECTION 0xc0 -#define FEEDBACK_MASK 0x0e /* Valid just for 1st OP of a voice */ -#define CONNECTION_BIT 0x01 -/* - * In the 4 OP mode there is four possible configurations how the - * operators can be connected together (in 2 OP modes there is just - * AM or FM). The 4 OP connection mode is defined by the rightmost - * bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves. - * - * First half Second half Mode - * - * +---+ - * v | - * 0 0 >+-1-+--2--3--4--> - * - * - * - * +---+ - * | | - * 0 1 >+-1-+--2-+ - * |-> - * >--3----4-+ - * - * +---+ - * | | - * 1 0 >+-1-+-----+ - * |-> - * >--2--3--4-+ - * - * +---+ - * | | - * 1 1 >+-1-+--+ - * | - * >--2--3-+-> - * | - * >--4----+ - */ -#define STEREO_BITS 0x30 /* OPL-3 only */ -#define VOICE_TO_LEFT 0x10 -#define VOICE_TO_RIGHT 0x20 - -/* - * Definition table for the physical voices - */ - -struct physical_voice_info { - unsigned char voice_num; - unsigned char voice_mode; /* 0=unavailable, 2=2 OP, 4=4 OP */ - unsigned short ioaddr; /* I/O port (left or right side) */ - unsigned char op[4]; /* Operator offsets */ - }; - -/* - * There is 18 possible 2 OP voices - * (9 in the left and 9 in the right). - * The first OP is the modulator and 2nd is the carrier. - * - * The first three voices in the both sides may be connected - * with another voice to a 4 OP voice. For example voice 0 - * can be connected with voice 3. The operators of voice 3 are - * used as operators 3 and 4 of the new 4 OP voice. - * In this case the 2 OP voice number 0 is the 'first half' and - * voice 3 is the second. - */ - -#define USE_LEFT 0 -#define USE_RIGHT 1 - -static struct physical_voice_info pv_map[18] = -{ -/* No Mode Side OP1 OP2 OP3 OP4 */ -/* --------------------------------------------------- */ - { 0, 2, USE_LEFT, {0x00, 0x03, 0x08, 0x0b}}, - { 1, 2, USE_LEFT, {0x01, 0x04, 0x09, 0x0c}}, - { 2, 2, USE_LEFT, {0x02, 0x05, 0x0a, 0x0d}}, - - { 3, 2, USE_LEFT, {0x08, 0x0b, 0x00, 0x00}}, - { 4, 2, USE_LEFT, {0x09, 0x0c, 0x00, 0x00}}, - { 5, 2, USE_LEFT, {0x0a, 0x0d, 0x00, 0x00}}, - - { 6, 2, USE_LEFT, {0x10, 0x13, 0x00, 0x00}}, /* Used by percussive voices */ - { 7, 2, USE_LEFT, {0x11, 0x14, 0x00, 0x00}}, /* if the percussive mode */ - { 8, 2, USE_LEFT, {0x12, 0x15, 0x00, 0x00}}, /* is selected */ - - { 0, 2, USE_RIGHT, {0x00, 0x03, 0x08, 0x0b}}, - { 1, 2, USE_RIGHT, {0x01, 0x04, 0x09, 0x0c}}, - { 2, 2, USE_RIGHT, {0x02, 0x05, 0x0a, 0x0d}}, - - { 3, 2, USE_RIGHT, {0x08, 0x0b, 0x00, 0x00}}, - { 4, 2, USE_RIGHT, {0x09, 0x0c, 0x00, 0x00}}, - { 5, 2, USE_RIGHT, {0x0a, 0x0d, 0x00, 0x00}}, - - { 6, 2, USE_RIGHT, {0x10, 0x13, 0x00, 0x00}}, - { 7, 2, USE_RIGHT, {0x11, 0x14, 0x00, 0x00}}, - { 8, 2, USE_RIGHT, {0x12, 0x15, 0x00, 0x00}} -}; -/* - * DMA buffer calls - */ diff --git a/sound/oss/os.h b/sound/oss/os.h deleted file mode 100644 index 0bf89e1d679c..000000000000 --- a/sound/oss/os.h +++ /dev/null @@ -1,45 +0,0 @@ -#define ALLOW_SELECT -#undef NO_INLINE_ASM -#define SHORT_BANNERS -#define MANUAL_PNP -#undef DO_TIMINGS - -#include <linux/module.h> - -#ifdef __KERNEL__ -#include <linux/string.h> -#include <linux/fs.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/param.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <asm/page.h> -#include <linux/vmalloc.h> -#include <linux/uaccess.h> -#include <linux/poll.h> -#include <linux/pci.h> -#endif - -#include <linux/soundcard.h> - -#define FALSE 0 -#define TRUE 1 - -extern int sound_alloc_dma(int chn, char *deviceID); -extern int sound_open_dma(int chn, char *deviceID); -extern void sound_free_dma(int chn); -extern void sound_close_dma(int chn); - -extern void reprogram_timer(void); - -#define USE_AUTOINIT_DMA - -extern void *sound_mem_blocks[1024]; -extern int sound_nblocks; - -#undef PSEUDO_DMA_AUTOINIT -#define ALLOW_BUFFER_MAPPING - -extern const struct file_operations oss_sound_fops; diff --git a/sound/oss/pas2.h b/sound/oss/pas2.h deleted file mode 100644 index d19f757dbd79..000000000000 --- a/sound/oss/pas2.h +++ /dev/null @@ -1,20 +0,0 @@ - -/* From pas_card.c */ -int pas_set_intr(int mask); -int pas_remove_intr(int mask); -unsigned char pas_read(int ioaddr); -void pas_write(unsigned char data, int ioaddr); - -/* From pas_audio.c */ -void pas_pcm_interrupt(unsigned char status, int cause); -void pas_pcm_init(struct address_info *hw_config); - -/* From pas_mixer.c */ -int pas_init_mixer(void); - -/* From pas_midi.c */ -void pas_midi_init(void); -void pas_midi_interrupt(void); - -/* From pas2_mixer.c*/ -void mix_write(unsigned char data, int ioaddr); diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c deleted file mode 100644 index 769fca692d2a..000000000000 --- a/sound/oss/pas2_card.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * sound/oss/pas2_card.c - * - * Detection routine for the Pro Audio Spectrum cards. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include "sound_config.h" - -#include "pas2.h" -#include "sb.h" - -static unsigned char dma_bits[] = { - 4, 1, 2, 3, 0, 5, 6, 7 -}; - -static unsigned char irq_bits[] = { - 0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11 -}; - -static unsigned char sb_irq_bits[] = { - 0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, - 0x00, 0x08, 0x28, 0x30, 0x38, 0, 0 -}; - -static unsigned char sb_dma_bits[] = { - 0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0 -}; - -/* - * The Address Translation code is used to convert I/O register addresses to - * be relative to the given base -register - */ - -int pas_translate_code = 0; -static int pas_intr_mask; -static int pas_irq; -static int pas_sb_base; -DEFINE_SPINLOCK(pas_lock); -#ifndef CONFIG_PAS_JOYSTICK -static bool joystick; -#else -static bool joystick = 1; -#endif -#ifdef SYMPHONY_PAS -static bool symphony = 1; -#else -static bool symphony; -#endif -#ifdef BROKEN_BUS_CLOCK -static bool broken_bus_clock = 1; -#else -static bool broken_bus_clock; -#endif - -static struct address_info cfg; -static struct address_info cfg2; - -char pas_model = 0; -static char *pas_model_names[] = { - "", - "Pro AudioSpectrum+", - "CDPC", - "Pro AudioSpectrum 16", - "Pro AudioSpectrum 16D" -}; - -/* - * pas_read() and pas_write() are equivalents of inb and outb - * These routines perform the I/O address translation required - * to support other than the default base address - */ - -unsigned char pas_read(int ioaddr) -{ - return inb(ioaddr + pas_translate_code); -} - -void pas_write(unsigned char data, int ioaddr) -{ - outb((data), ioaddr + pas_translate_code); -} - -/******************* Begin of the Interrupt Handler ********************/ - -static irqreturn_t pasintr(int irq, void *dev_id) -{ - int status; - - status = pas_read(0x0B89); - pas_write(status, 0x0B89); /* Clear interrupt */ - - if (status & 0x08) - { - pas_pcm_interrupt(status, 1); - status &= ~0x08; - } - if (status & 0x10) - { - pas_midi_interrupt(); - status &= ~0x10; - } - return IRQ_HANDLED; -} - -int pas_set_intr(int mask) -{ - if (!mask) - return 0; - - pas_intr_mask |= mask; - - pas_write(pas_intr_mask, 0x0B8B); - return 0; -} - -int pas_remove_intr(int mask) -{ - if (!mask) - return 0; - - pas_intr_mask &= ~mask; - pas_write(pas_intr_mask, 0x0B8B); - - return 0; -} - -/******************* End of the Interrupt handler **********************/ - -/******************* Begin of the Initialization Code ******************/ - -static int __init config_pas_hw(struct address_info *hw_config) -{ - char ok = 1; - unsigned int_ptrs; /* scsi/sound interrupt pointers */ - - pas_irq = hw_config->irq; - - pas_write(0x00, 0x0B8B); - pas_write(0x36, 0x138B); - pas_write(0x36, 0x1388); - pas_write(0, 0x1388); - pas_write(0x74, 0x138B); - pas_write(0x74, 0x1389); - pas_write(0, 0x1389); - - pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A); - pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A); - pas_write(0x01 | 0x02 | 0x04 | 0x10 /* - * | - * 0x80 - */ , 0xB88); - - pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388); - - if (pas_irq < 0 || pas_irq > 15) - { - printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); - hw_config->irq=-1; - ok = 0; - } - else - { - int_ptrs = pas_read(0xF38A); - int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq]; - pas_write(int_ptrs, 0xF38A); - if (!irq_bits[pas_irq]) - { - printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); - hw_config->irq=-1; - ok = 0; - } - else - { - if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) { - printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq); - hw_config->irq=-1; - ok = 0; - } - } - } - - if (hw_config->dma < 0 || hw_config->dma > 7) - { - printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); - hw_config->dma=-1; - ok = 0; - } - else - { - pas_write(dma_bits[hw_config->dma], 0xF389); - if (!dma_bits[hw_config->dma]) - { - printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); - hw_config->dma=-1; - ok = 0; - } - else - { - if (sound_alloc_dma(hw_config->dma, "PAS16")) - { - printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n"); - hw_config->dma=-1; - ok = 0; - } - } - } - - /* - * This fixes the timing problems of the PAS due to the Symphony chipset - * as per Media Vision. Only define this if your PAS doesn't work correctly. - */ - - if(symphony) - { - outb((0x05), 0xa8); - outb((0x60), 0xa9); - } - - if(broken_bus_clock) - pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388); - else - /* - * pas_write(0x01, 0x8388); - */ - pas_write(0x01 | 0x10 | 0x20, 0x8388); - - pas_write(0x18, 0x838A); /* ??? */ - pas_write(0x20 | 0x01, 0x0B8A); /* Mute off, filter = 17.897 kHz */ - pas_write(8, 0xBF8A); - - mix_write(0x80 | 5, 0x078B); - mix_write(5, 0x078B); - - { - struct address_info *sb_config; - - sb_config = &cfg2; - if (sb_config->io_base) - { - unsigned char irq_dma; - - /* - * Turn on Sound Blaster compatibility - * bit 1 = SB emulation - * bit 0 = MPU401 emulation (CDPC only :-( ) - */ - - pas_write(0x02, 0xF788); - - /* - * "Emulation address" - */ - - pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789); - pas_sb_base = sb_config->io_base; - - if (!sb_dma_bits[sb_config->dma]) - printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma); - - if (!sb_irq_bits[sb_config->irq]) - printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq); - - irq_dma = sb_dma_bits[sb_config->dma] | - sb_irq_bits[sb_config->irq]; - - pas_write(irq_dma, 0xFB8A); - } - else - pas_write(0x00, 0xF788); - } - - if (!ok) - printk(KERN_WARNING "PAS16: Driver not enabled\n"); - - return ok; -} - -static int __init detect_pas_hw(struct address_info *hw_config) -{ - unsigned char board_id, foo; - - /* - * WARNING: Setting an option like W:1 or so that disables warm boot reset - * of the card will screw up this detect code something fierce. Adding code - * to handle this means possibly interfering with other cards on the bus if - * you have something on base port 0x388. SO be forewarned. - */ - - outb((0xBC), 0x9A01); /* Activate first board */ - outb((hw_config->io_base >> 2), 0x9A01); /* Set base address */ - pas_translate_code = hw_config->io_base - 0x388; - pas_write(1, 0xBF88); /* Select one wait states */ - - board_id = pas_read(0x0B8B); - - if (board_id == 0xff) - return 0; - - /* - * We probably have a PAS-series board, now check for a PAS16-series board - * by trying to change the board revision bits. PAS16-series hardware won't - * let you do this - the bits are read-only. - */ - - foo = board_id ^ 0xe0; - - pas_write(foo, 0x0B8B); - foo = pas_read(0x0B8B); - pas_write(board_id, 0x0B8B); - - if (board_id != foo) - return 0; - - pas_model = pas_read(0xFF88); - - return pas_model; -} - -static void __init attach_pas_card(struct address_info *hw_config) -{ - pas_irq = hw_config->irq; - - if (detect_pas_hw(hw_config)) - { - - if ((pas_model = pas_read(0xFF88))) - { - char temp[100]; - - if (pas_model < 0 || - pas_model >= ARRAY_SIZE(pas_model_names)) { - printk(KERN_ERR "pas2 unrecognized model.\n"); - return; - } - sprintf(temp, - "%s rev %d", pas_model_names[(int) pas_model], - pas_read(0x2789)); - conf_printf(temp, hw_config); - } - if (config_pas_hw(hw_config)) - { - pas_pcm_init(hw_config); - pas_midi_init(); - pas_init_mixer(); - } - } -} - -static inline int __init probe_pas(struct address_info *hw_config) -{ - return detect_pas_hw(hw_config); -} - -static void __exit unload_pas(struct address_info *hw_config) -{ - extern int pas_audiodev; - extern int pas2_mididev; - - if (hw_config->dma>0) - sound_free_dma(hw_config->dma); - if (hw_config->irq>0) - free_irq(hw_config->irq, hw_config); - - if(pas_audiodev!=-1) - sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev); - if(pas2_mididev!=-1) - sound_unload_mididev(pas2_mididev); - if(pas_audiodev!=-1) - sound_unload_audiodev(pas_audiodev); -} - -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata dma16 = -1; /* Set this for modules that need it */ - -static int __initdata sb_io = 0; -static int __initdata sb_irq = -1; -static int __initdata sb_dma = -1; -static int __initdata sb_dma16 = -1; - -module_param_hw(io, int, ioport, 0); -module_param_hw(irq, int, irq, 0); -module_param_hw(dma, int, dma, 0); -module_param_hw(dma16, int, dma, 0); - -module_param_hw(sb_io, int, ioport, 0); -module_param_hw(sb_irq, int, irq, 0); -module_param_hw(sb_dma, int, dma, 0); -module_param_hw(sb_dma16, int, dma, 0); - -module_param(joystick, bool, 0); -module_param(symphony, bool, 0); -module_param(broken_bus_clock, bool, 0); - -MODULE_LICENSE("GPL"); - -static int __init init_pas2(void) -{ - printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n"); - - cfg.io_base = io; - cfg.irq = irq; - cfg.dma = dma; - cfg.dma2 = dma16; - - cfg2.io_base = sb_io; - cfg2.irq = sb_irq; - cfg2.dma = sb_dma; - cfg2.dma2 = sb_dma16; - - if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { - printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n"); - return -EINVAL; - } - - if (!probe_pas(&cfg)) - return -ENODEV; - attach_pas_card(&cfg); - - return 0; -} - -static void __exit cleanup_pas2(void) -{ - unload_pas(&cfg); -} - -module_init(init_pas2); -module_exit(cleanup_pas2); - -#ifndef MODULE -static int __init setup_pas2(char *str) -{ - /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */ - int ints[9]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - dma16 = ints[4]; - - sb_io = ints[5]; - sb_irq = ints[6]; - sb_dma = ints[7]; - sb_dma16 = ints[8]; - - return 1; -} - -__setup("pas2=", setup_pas2); -#endif diff --git a/sound/oss/pas2_midi.c b/sound/oss/pas2_midi.c deleted file mode 100644 index 1122d10a20c3..000000000000 --- a/sound/oss/pas2_midi.c +++ /dev/null @@ -1,262 +0,0 @@ -/* - * sound/oss/pas2_midi.c - * - * The low level driver for the PAS Midi Interface. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * Bartlomiej Zolnierkiewicz : Added __init to pas_init_mixer() - */ - -#include <linux/init.h> -#include <linux/spinlock.h> -#include "sound_config.h" - -#include "pas2.h" - -extern spinlock_t pas_lock; - -static int midi_busy, input_opened; -static int my_dev; - -int pas2_mididev=-1; - -static unsigned char tmp_queue[256]; -static volatile int qlen; -static volatile unsigned char qhead, qtail; - -static void (*midi_input_intr) (int dev, unsigned char data); - -static int pas_midi_open(int dev, int mode, - void (*input) (int dev, unsigned char data), - void (*output) (int dev) -) -{ - int err; - unsigned long flags; - unsigned char ctrl; - - - if (midi_busy) - return -EBUSY; - - /* - * Reset input and output FIFO pointers - */ - pas_write(0x20 | 0x40, - 0x178b); - - spin_lock_irqsave(&pas_lock, flags); - - if ((err = pas_set_intr(0x10)) < 0) - { - spin_unlock_irqrestore(&pas_lock, flags); - return err; - } - /* - * Enable input available and output FIFO empty interrupts - */ - - ctrl = 0; - input_opened = 0; - midi_input_intr = input; - - if (mode == OPEN_READ || mode == OPEN_READWRITE) - { - ctrl |= 0x04; /* Enable input */ - input_opened = 1; - } - if (mode == OPEN_WRITE || mode == OPEN_READWRITE) - { - ctrl |= 0x08 | 0x10; /* Enable output */ - } - pas_write(ctrl, 0x178b); - - /* - * Acknowledge any pending interrupts - */ - - pas_write(0xff, 0x1B88); - - spin_unlock_irqrestore(&pas_lock, flags); - - midi_busy = 1; - qlen = qhead = qtail = 0; - return 0; -} - -static void pas_midi_close(int dev) -{ - - /* - * Reset FIFO pointers, disable intrs - */ - pas_write(0x20 | 0x40, 0x178b); - - pas_remove_intr(0x10); - midi_busy = 0; -} - -static int dump_to_midi(unsigned char midi_byte) -{ - int fifo_space, x; - - fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f; - - /* - * The MIDI FIFO space register and it's documentation is nonunderstandable. - * There seem to be no way to differentiate between buffer full and buffer - * empty situations. For this reason we don't never write the buffer - * completely full. In this way we can assume that 0 (or is it 15) - * means that the buffer is empty. - */ - - if (fifo_space < 2 && fifo_space != 0) /* Full (almost) */ - return 0; /* Ask upper layers to retry after some time */ - - pas_write(midi_byte, 0x178A); - - return 1; -} - -static int pas_midi_out(int dev, unsigned char midi_byte) -{ - - unsigned long flags; - - /* - * Drain the local queue first - */ - - spin_lock_irqsave(&pas_lock, flags); - - while (qlen && dump_to_midi(tmp_queue[qhead])) - { - qlen--; - qhead++; - } - - spin_unlock_irqrestore(&pas_lock, flags); - - /* - * Output the byte if the local queue is empty. - */ - - if (!qlen) - if (dump_to_midi(midi_byte)) - return 1; - - /* - * Put to the local queue - */ - - if (qlen >= 256) - return 0; /* Local queue full */ - - spin_lock_irqsave(&pas_lock, flags); - - tmp_queue[qtail] = midi_byte; - qlen++; - qtail++; - - spin_unlock_irqrestore(&pas_lock, flags); - - return 1; -} - -static int pas_midi_start_read(int dev) -{ - return 0; -} - -static int pas_midi_end_read(int dev) -{ - return 0; -} - -static void pas_midi_kick(int dev) -{ -} - -static int pas_buffer_status(int dev) -{ - return qlen; -} - -#define MIDI_SYNTH_NAME "Pro Audio Spectrum Midi" -#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT -#include "midi_synth.h" - -static struct midi_operations pas_midi_operations = -{ - .owner = THIS_MODULE, - .info = {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS}, - .converter = &std_midi_synth, - .in_info = {0}, - .open = pas_midi_open, - .close = pas_midi_close, - .outputc = pas_midi_out, - .start_read = pas_midi_start_read, - .end_read = pas_midi_end_read, - .kick = pas_midi_kick, - .buffer_status = pas_buffer_status, -}; - -void __init pas_midi_init(void) -{ - int dev = sound_alloc_mididev(); - - if (dev == -1) - { - printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n"); - return; - } - std_midi_synth.midi_dev = my_dev = dev; - midi_devs[dev] = &pas_midi_operations; - pas2_mididev = dev; - sequencer_init(); -} - -void pas_midi_interrupt(void) -{ - unsigned char stat; - int i, incount; - - stat = pas_read(0x1B88); - - if (stat & 0x04) /* Input data available */ - { - incount = pas_read(0x1B89) & 0x0f; /* Input FIFO size */ - if (!incount) - incount = 16; - - for (i = 0; i < incount; i++) - if (input_opened) - { - midi_input_intr(my_dev, pas_read(0x178A)); - } else - pas_read(0x178A); /* Flush */ - } - if (stat & (0x08 | 0x10)) - { - spin_lock(&pas_lock);/* called in irq context */ - - while (qlen && dump_to_midi(tmp_queue[qhead])) - { - qlen--; - qhead++; - } - - spin_unlock(&pas_lock); - } - if (stat & 0x40) - { - printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat); - } - pas_write(stat, 0x1B88); /* Acknowledge interrupts */ -} diff --git a/sound/oss/pas2_mixer.c b/sound/oss/pas2_mixer.c deleted file mode 100644 index 50b5bd501247..000000000000 --- a/sound/oss/pas2_mixer.c +++ /dev/null @@ -1,327 +0,0 @@ - -/* - * sound/oss/pas2_mixer.c - * - * Mixer routines for the Pro Audio Spectrum cards. - */ - -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Bartlomiej Zolnierkiewicz : added __init to pas_init_mixer() - */ -#include <linux/init.h> -#include "sound_config.h" - -#include "pas2.h" - -extern int pas_translate_code; -extern char pas_model; -extern int *pas_osp; -extern int pas_audiodev; - -static int rec_devices = (SOUND_MASK_MIC); /* Default recording source */ -static int mode_control; - -#define POSSIBLE_RECORDING_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD | SOUND_MASK_ALTPCM) - -#define SUPPORTED_MIXER_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD | SOUND_MASK_ALTPCM | SOUND_MASK_IMIX | \ - SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_RECLEV) - -static int *levels; - -static int default_levels[32] = -{ - 0x3232, /* Master Volume */ - 0x3232, /* Bass */ - 0x3232, /* Treble */ - 0x5050, /* FM */ - 0x4b4b, /* PCM */ - 0x3232, /* PC Speaker */ - 0x4b4b, /* Ext Line */ - 0x4b4b, /* Mic */ - 0x4b4b, /* CD */ - 0x6464, /* Recording monitor */ - 0x4b4b, /* SB PCM */ - 0x6464 /* Recording level */ -}; - -void -mix_write(unsigned char data, int ioaddr) -{ - /* - * The Revision D cards have a problem with their MVA508 interface. The - * kludge-o-rama fix is to make a 16-bit quantity with identical LSB and - * MSBs out of the output byte and to do a 16-bit out to the mixer port - - * 1. We need to do this because it isn't timing problem but chip access - * sequence problem. - */ - - if (pas_model == 4) - { - outw(data | (data << 8), (ioaddr + pas_translate_code) - 1); - outb((0x80), 0); - } else - pas_write(data, ioaddr); -} - -static int -mixer_output(int right_vol, int left_vol, int div, int bits, - int mixer) /* Input or output mixer */ -{ - int left = left_vol * div / 100; - int right = right_vol * div / 100; - - - if (bits & 0x10) - { - left |= mixer; - right |= mixer; - } - if (bits == 0x03 || bits == 0x04) - { - mix_write(0x80 | bits, 0x078B); - mix_write(left, 0x078B); - right_vol = left_vol; - } else - { - mix_write(0x80 | 0x20 | bits, 0x078B); - mix_write(left, 0x078B); - mix_write(0x80 | 0x40 | bits, 0x078B); - mix_write(right, 0x078B); - } - - return (left_vol | (right_vol << 8)); -} - -static void -set_mode(int new_mode) -{ - mix_write(0x80 | 0x05, 0x078B); - mix_write(new_mode, 0x078B); - - mode_control = new_mode; -} - -static int -pas_mixer_set(int whichDev, unsigned int level) -{ - int left, right, devmask, changed, i, mixer = 0; - - left = level & 0x7f; - right = (level & 0x7f00) >> 8; - - if (whichDev < SOUND_MIXER_NRDEVICES) { - if ((1 << whichDev) & rec_devices) - mixer = 0x20; - else - mixer = 0x00; - } - - switch (whichDev) - { - case SOUND_MIXER_VOLUME: /* Master volume (0-63) */ - levels[whichDev] = mixer_output(right, left, 63, 0x01, 0); - break; - - /* - * Note! Bass and Treble are mono devices. Will use just the left - * channel. - */ - case SOUND_MIXER_BASS: /* Bass (0-12) */ - levels[whichDev] = mixer_output(right, left, 12, 0x03, 0); - break; - case SOUND_MIXER_TREBLE: /* Treble (0-12) */ - levels[whichDev] = mixer_output(right, left, 12, 0x04, 0); - break; - - case SOUND_MIXER_SYNTH: /* Internal synthesizer (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x00, mixer); - break; - case SOUND_MIXER_PCM: /* PAS PCM (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x05, mixer); - break; - case SOUND_MIXER_ALTPCM: /* SB PCM (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x07, mixer); - break; - case SOUND_MIXER_SPEAKER: /* PC speaker (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x06, mixer); - break; - case SOUND_MIXER_LINE: /* External line (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x02, mixer); - break; - case SOUND_MIXER_CD: /* CD (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x03, mixer); - break; - case SOUND_MIXER_MIC: /* External microphone (0-31) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x04, mixer); - break; - case SOUND_MIXER_IMIX: /* Recording monitor (0-31) (Output mixer only) */ - levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x01, - 0x00); - break; - case SOUND_MIXER_RECLEV: /* Recording level (0-15) */ - levels[whichDev] = mixer_output(right, left, 15, 0x02, 0); - break; - - - case SOUND_MIXER_RECSRC: - devmask = level & POSSIBLE_RECORDING_DEVICES; - - changed = devmask ^ rec_devices; - rec_devices = devmask; - - for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) - if (changed & (1 << i)) - { - pas_mixer_set(i, levels[i]); - } - return rec_devices; - break; - - default: - return -EINVAL; - } - - return (levels[whichDev]); -} - -/*****/ - -static void -pas_mixer_reset(void) -{ - int foo; - - for (foo = 0; foo < SOUND_MIXER_NRDEVICES; foo++) - pas_mixer_set(foo, levels[foo]); - - set_mode(0x04 | 0x01); -} - -static int pas_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - int level,v ; - int __user *p = (int __user *)arg; - - if (cmd == SOUND_MIXER_PRIVATE1) { /* Set loudness bit */ - if (get_user(level, p)) - return -EFAULT; - if (level == -1) /* Return current settings */ - level = (mode_control & 0x04); - else { - mode_control &= ~0x04; - if (level) - mode_control |= 0x04; - set_mode(mode_control); - } - level = !!level; - return put_user(level, p); - } - if (cmd == SOUND_MIXER_PRIVATE2) { /* Set enhance bit */ - if (get_user(level, p)) - return -EFAULT; - if (level == -1) { /* Return current settings */ - if (!(mode_control & 0x03)) - level = 0; - else - level = ((mode_control & 0x03) + 1) * 20; - } else { - int i = 0; - - level &= 0x7f; - if (level) - i = (level / 20) - 1; - mode_control &= ~0x03; - mode_control |= i & 0x03; - set_mode(mode_control); - if (i) - i = (i + 1) * 20; - level = i; - } - return put_user(level, p); - } - if (cmd == SOUND_MIXER_PRIVATE3) { /* Set mute bit */ - if (get_user(level, p)) - return -EFAULT; - if (level == -1) /* Return current settings */ - level = !(pas_read(0x0B8A) & 0x20); - else { - if (level) - pas_write(pas_read(0x0B8A) & (~0x20), 0x0B8A); - else - pas_write(pas_read(0x0B8A) | 0x20, 0x0B8A); - - level = !(pas_read(0x0B8A) & 0x20); - } - return put_user(level, p); - } - if (((cmd >> 8) & 0xff) == 'M') { - if (get_user(v, p)) - return -EFAULT; - if (_SIOC_DIR(cmd) & _SIOC_WRITE) { - v = pas_mixer_set(cmd & 0xff, v); - } else { - switch (cmd & 0xff) { - case SOUND_MIXER_RECSRC: - v = rec_devices; - break; - - case SOUND_MIXER_STEREODEVS: - v = SUPPORTED_MIXER_DEVICES & ~(SOUND_MASK_BASS | SOUND_MASK_TREBLE); - break; - - case SOUND_MIXER_DEVMASK: - v = SUPPORTED_MIXER_DEVICES; - break; - - case SOUND_MIXER_RECMASK: - v = POSSIBLE_RECORDING_DEVICES & SUPPORTED_MIXER_DEVICES; - break; - - case SOUND_MIXER_CAPS: - v = 0; /* No special capabilities */ - break; - - default: - v = levels[cmd & 0xff]; - break; - } - } - return put_user(v, p); - } - return -EINVAL; -} - -static struct mixer_operations pas_mixer_operations = -{ - .owner = THIS_MODULE, - .id = "PAS16", - .name = "Pro Audio Spectrum 16", - .ioctl = pas_mixer_ioctl -}; - -int __init -pas_init_mixer(void) -{ - int d; - - levels = load_mixer_volumes("PAS16_1", default_levels, 1); - - pas_mixer_reset(); - - if ((d = sound_alloc_mixerdev()) != -1) - { - audio_devs[pas_audiodev]->mixer_dev = d; - mixer_devs[d] = &pas_mixer_operations; - } - return 1; -} diff --git a/sound/oss/pas2_pcm.c b/sound/oss/pas2_pcm.c deleted file mode 100644 index 474803b52f7d..000000000000 --- a/sound/oss/pas2_pcm.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * pas2_pcm.c Audio routines for PAS16 - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Alan Cox : Swatted a double allocation of device bug. Made a few - * more things module options. - * Bartlomiej Zolnierkiewicz : Added __init to pas_pcm_init() - */ - -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/timex.h> -#include "sound_config.h" - -#include "pas2.h" - -#define PAS_PCM_INTRBITS (0x08) -/* - * Sample buffer timer interrupt enable - */ - -#define PCM_NON 0 -#define PCM_DAC 1 -#define PCM_ADC 2 - -static unsigned long pcm_speed; /* sampling rate */ -static unsigned char pcm_channels = 1; /* channels (1 or 2) */ -static unsigned char pcm_bits = 8; /* bits/sample (8 or 16) */ -static unsigned char pcm_filter; /* filter FLAG */ -static unsigned char pcm_mode = PCM_NON; -static unsigned long pcm_count; -static unsigned short pcm_bitsok = 8; /* mask of OK bits */ -static int pcm_busy; -int pas_audiodev = -1; -static int open_mode; - -extern spinlock_t pas_lock; - -static int pcm_set_speed(int arg) -{ - int foo, tmp; - unsigned long flags; - - if (arg == 0) - return pcm_speed; - - if (arg > 44100) - arg = 44100; - if (arg < 5000) - arg = 5000; - - if (pcm_channels & 2) - { - foo = ((PIT_TICK_RATE / 2) + (arg / 2)) / arg; - arg = ((PIT_TICK_RATE / 2) + (foo / 2)) / foo; - } - else - { - foo = (PIT_TICK_RATE + (arg / 2)) / arg; - arg = (PIT_TICK_RATE + (foo / 2)) / foo; - } - - pcm_speed = arg; - - tmp = pas_read(0x0B8A); - - /* - * Set anti-aliasing filters according to sample rate. You really *NEED* - * to enable this feature for all normal recording unless you want to - * experiment with aliasing effects. - * These filters apply to the selected "recording" source. - * I (pfw) don't know the encoding of these 5 bits. The values shown - * come from the SDK found on ftp.uwp.edu:/pub/msdos/proaudio/. - * - * I cleared bit 5 of these values, since that bit controls the master - * mute flag. (Olav Wölfelschneider) - * - */ -#if !defined NO_AUTO_FILTER_SET - tmp &= 0xe0; - if (pcm_speed >= 2 * 17897) - tmp |= 0x01; - else if (pcm_speed >= 2 * 15909) - tmp |= 0x02; - else if (pcm_speed >= 2 * 11931) - tmp |= 0x09; - else if (pcm_speed >= 2 * 8948) - tmp |= 0x11; - else if (pcm_speed >= 2 * 5965) - tmp |= 0x19; - else if (pcm_speed >= 2 * 2982) - tmp |= 0x04; - pcm_filter = tmp; -#endif - - spin_lock_irqsave(&pas_lock, flags); - - pas_write(tmp & ~(0x40 | 0x80), 0x0B8A); - pas_write(0x00 | 0x30 | 0x04, 0x138B); - pas_write(foo & 0xff, 0x1388); - pas_write((foo >> 8) & 0xff, 0x1388); - pas_write(tmp, 0x0B8A); - - spin_unlock_irqrestore(&pas_lock, flags); - - return pcm_speed; -} - -static int pcm_set_channels(int arg) -{ - - if ((arg != 1) && (arg != 2)) - return pcm_channels; - - if (arg != pcm_channels) - { - pas_write(pas_read(0xF8A) ^ 0x20, 0xF8A); - - pcm_channels = arg; - pcm_set_speed(pcm_speed); /* The speed must be reinitialized */ - } - return pcm_channels; -} - -static int pcm_set_bits(int arg) -{ - if (arg == 0) - return pcm_bits; - - if ((arg & pcm_bitsok) != arg) - return pcm_bits; - - if (arg != pcm_bits) - { - pas_write(pas_read(0x8389) ^ 0x04, 0x8389); - - pcm_bits = arg; - } - return pcm_bits; -} - -static int pas_audio_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - int val, ret; - int __user *p = arg; - - switch (cmd) - { - case SOUND_PCM_WRITE_RATE: - if (get_user(val, p)) - return -EFAULT; - ret = pcm_set_speed(val); - break; - - case SOUND_PCM_READ_RATE: - ret = pcm_speed; - break; - - case SNDCTL_DSP_STEREO: - if (get_user(val, p)) - return -EFAULT; - ret = pcm_set_channels(val + 1) - 1; - break; - - case SOUND_PCM_WRITE_CHANNELS: - if (get_user(val, p)) - return -EFAULT; - ret = pcm_set_channels(val); - break; - - case SOUND_PCM_READ_CHANNELS: - ret = pcm_channels; - break; - - case SNDCTL_DSP_SETFMT: - if (get_user(val, p)) - return -EFAULT; - ret = pcm_set_bits(val); - break; - - case SOUND_PCM_READ_BITS: - ret = pcm_bits; - break; - - default: - return -EINVAL; - } - return put_user(ret, p); -} - -static void pas_audio_reset(int dev) -{ - pas_write(pas_read(0xF8A) & ~0x40, 0xF8A); /* Disable PCM */ -} - -static int pas_audio_open(int dev, int mode) -{ - int err; - unsigned long flags; - - spin_lock_irqsave(&pas_lock, flags); - if (pcm_busy) - { - spin_unlock_irqrestore(&pas_lock, flags); - return -EBUSY; - } - pcm_busy = 1; - spin_unlock_irqrestore(&pas_lock, flags); - - if ((err = pas_set_intr(PAS_PCM_INTRBITS)) < 0) - return err; - - - pcm_count = 0; - open_mode = mode; - - return 0; -} - -static void pas_audio_close(int dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pas_lock, flags); - - pas_audio_reset(dev); - pas_remove_intr(PAS_PCM_INTRBITS); - pcm_mode = PCM_NON; - - pcm_busy = 0; - spin_unlock_irqrestore(&pas_lock, flags); -} - -static void pas_audio_output_block(int dev, unsigned long buf, int count, - int intrflag) -{ - unsigned long flags, cnt; - - cnt = count; - if (audio_devs[dev]->dmap_out->dma > 3) - cnt >>= 1; - - if (audio_devs[dev]->flags & DMA_AUTOMODE && - intrflag && - cnt == pcm_count) - return; - - spin_lock_irqsave(&pas_lock, flags); - - pas_write(pas_read(0xF8A) & ~0x40, - 0xF8A); - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - - if (count != pcm_count) - { - pas_write(pas_read(0x0B8A) & ~0x80, 0x0B8A); - pas_write(0x40 | 0x30 | 0x04, 0x138B); - pas_write(count & 0xff, 0x1389); - pas_write((count >> 8) & 0xff, 0x1389); - pas_write(pas_read(0x0B8A) | 0x80, 0x0B8A); - - pcm_count = count; - } - pas_write(pas_read(0x0B8A) | 0x80 | 0x40, 0x0B8A); -#ifdef NO_TRIGGER - pas_write(pas_read(0xF8A) | 0x40 | 0x10, 0xF8A); -#endif - - pcm_mode = PCM_DAC; - - spin_unlock_irqrestore(&pas_lock, flags); -} - -static void pas_audio_start_input(int dev, unsigned long buf, int count, - int intrflag) -{ - unsigned long flags; - int cnt; - - cnt = count; - if (audio_devs[dev]->dmap_out->dma > 3) - cnt >>= 1; - - if (audio_devs[pas_audiodev]->flags & DMA_AUTOMODE && - intrflag && - cnt == pcm_count) - return; - - spin_lock_irqsave(&pas_lock, flags); - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - - if (count != pcm_count) - { - pas_write(pas_read(0x0B8A) & ~0x80, 0x0B8A); - pas_write(0x40 | 0x30 | 0x04, 0x138B); - pas_write(count & 0xff, 0x1389); - pas_write((count >> 8) & 0xff, 0x1389); - pas_write(pas_read(0x0B8A) | 0x80, 0x0B8A); - - pcm_count = count; - } - pas_write(pas_read(0x0B8A) | 0x80 | 0x40, 0x0B8A); -#ifdef NO_TRIGGER - pas_write((pas_read(0xF8A) | 0x40) & ~0x10, 0xF8A); -#endif - - pcm_mode = PCM_ADC; - - spin_unlock_irqrestore(&pas_lock, flags); -} - -#ifndef NO_TRIGGER -static void pas_audio_trigger(int dev, int state) -{ - unsigned long flags; - - spin_lock_irqsave(&pas_lock, flags); - state &= open_mode; - - if (state & PCM_ENABLE_OUTPUT) - pas_write(pas_read(0xF8A) | 0x40 | 0x10, 0xF8A); - else if (state & PCM_ENABLE_INPUT) - pas_write((pas_read(0xF8A) | 0x40) & ~0x10, 0xF8A); - else - pas_write(pas_read(0xF8A) & ~0x40, 0xF8A); - - spin_unlock_irqrestore(&pas_lock, flags); -} -#endif - -static int pas_audio_prepare_for_input(int dev, int bsize, int bcount) -{ - pas_audio_reset(dev); - return 0; -} - -static int pas_audio_prepare_for_output(int dev, int bsize, int bcount) -{ - pas_audio_reset(dev); - return 0; -} - -static struct audio_driver pas_audio_driver = -{ - .owner = THIS_MODULE, - .open = pas_audio_open, - .close = pas_audio_close, - .output_block = pas_audio_output_block, - .start_input = pas_audio_start_input, - .ioctl = pas_audio_ioctl, - .prepare_for_input = pas_audio_prepare_for_input, - .prepare_for_output = pas_audio_prepare_for_output, - .halt_io = pas_audio_reset, - .trigger = pas_audio_trigger -}; - -void __init pas_pcm_init(struct address_info *hw_config) -{ - pcm_bitsok = 8; - if (pas_read(0xEF8B) & 0x08) - pcm_bitsok |= 16; - - pcm_set_speed(DSP_DEFAULT_SPEED); - - if ((pas_audiodev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, - "Pro Audio Spectrum", - &pas_audio_driver, - sizeof(struct audio_driver), - DMA_AUTOMODE, - AFMT_U8 | AFMT_S16_LE, - NULL, - hw_config->dma, - hw_config->dma)) < 0) - printk(KERN_WARNING "PAS16: Too many PCM devices available\n"); -} - -void pas_pcm_interrupt(unsigned char status, int cause) -{ - if (cause == 1) - { - /* - * Halt the PCM first. Otherwise we don't have time to start a new - * block before the PCM chip proceeds to the next sample - */ - - if (!(audio_devs[pas_audiodev]->flags & DMA_AUTOMODE)) - pas_write(pas_read(0xF8A) & ~0x40, 0xF8A); - - switch (pcm_mode) - { - case PCM_DAC: - DMAbuf_outputintr(pas_audiodev, 1); - break; - - case PCM_ADC: - DMAbuf_inputintr(pas_audiodev); - break; - - default: - printk(KERN_WARNING "PAS: Unexpected PCM interrupt\n"); - } - } -} diff --git a/sound/oss/pss.c b/sound/oss/pss.c deleted file mode 100644 index 33c3a442e162..000000000000 --- a/sound/oss/pss.c +++ /dev/null @@ -1,1270 +0,0 @@ -/* - * sound/oss/pss.c - * - * The low level driver for the Personal Sound System (ECHO ESC614). - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer ioctl code reworked (vmalloc/vfree removed) - * Alan Cox modularisation, clean up. - * - * 98-02-21: Vladimir Michl <vladimir.michl@upol.cz> - * Added mixer device for Beethoven ADSP-16 (master volume, - * bass, treble, synth), only for speakers. - * Fixed bug in pss_write (exchange parameters) - * Fixed config port of SB - * Requested two regions for PSS (PSS mixer, PSS config) - * Modified pss_download_boot - * To probe_pss_mss added test for initialize AD1848 - * 98-05-28: Vladimir Michl <vladimir.michl@upol.cz> - * Fixed computation of mixer volumes - * 04-05-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu> - * Added code that allows the user to enable his cdrom and/or - * joystick through the module parameters pss_cdrom_port and - * pss_enable_joystick. pss_cdrom_port takes a port address as its - * argument. pss_enable_joystick takes either a 0 or a non-0 as its - * argument. - * 04-06-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu> - * Separated some code into new functions for easier reuse. - * Cleaned up and streamlined new code. Added code to allow a user - * to only use this driver for enabling non-sound components - * through the new module parameter pss_no_sound (flag). Added - * code that would allow a user to decide whether the driver should - * reset the configured hardware settings for the PSS board through - * the module parameter pss_keep_settings (flag). This flag will - * allow a user to free up resources in use by this card if needbe, - * furthermore it allows him to use this driver to just enable the - * emulations and then be unloaded as it is no longer needed. Both - * new settings are only available to this driver if compiled as a - * module. The default settings of all new parameters are set to - * load the driver as it did in previous versions. - * 04-07-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu> - * Added module parameter pss_firmware to allow the user to tell - * the driver where the firmware file is located. The default - * setting is the previous hardcoded setting "/etc/sound/pss_synth". - * 00-03-03: Christoph Hellwig <chhellwig@infradead.org> - * Adapted to module_init/module_exit - * 11-10-2000: Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> - * Added __init to probe_pss(), attach_pss() and probe_pss_mpu() - * 02-Jan-2001: Chris Rankin - * Specify that this module owns the coprocessor - */ - - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/spinlock.h> - -#include "sound_config.h" -#include "sound_firmware.h" - -#include "ad1848.h" -#include "mpu401.h" - -/* - * PSS registers. - */ -#define REG(x) (devc->base+x) -#define PSS_DATA 0 -#define PSS_STATUS 2 -#define PSS_CONTROL 2 -#define PSS_ID 4 -#define PSS_IRQACK 4 -#define PSS_PIO 0x1a - -/* - * Config registers - */ -#define CONF_PSS 0x10 -#define CONF_WSS 0x12 -#define CONF_SB 0x14 -#define CONF_CDROM 0x16 -#define CONF_MIDI 0x18 - -/* - * Status bits. - */ -#define PSS_FLAG3 0x0800 -#define PSS_FLAG2 0x0400 -#define PSS_FLAG1 0x1000 -#define PSS_FLAG0 0x0800 -#define PSS_WRITE_EMPTY 0x8000 -#define PSS_READ_FULL 0x4000 - -/* - * WSS registers - */ -#define WSS_INDEX 4 -#define WSS_DATA 5 - -/* - * WSS status bits - */ -#define WSS_INITIALIZING 0x80 -#define WSS_AUTOCALIBRATION 0x20 - -#define NO_WSS_MIXER -1 - -#include "coproc.h" - -#include "pss_boot.h" - -/* If compiled into kernel, it enable or disable pss mixer */ -#ifdef CONFIG_PSS_MIXER -static bool pss_mixer = 1; -#else -static bool pss_mixer; -#endif - - -struct pss_mixerdata { - unsigned int volume_l; - unsigned int volume_r; - unsigned int bass; - unsigned int treble; - unsigned int synth; -}; - -struct pss_confdata { - int base; - int irq; - int dma; - int *osp; - struct pss_mixerdata mixer; - int ad_mixer_dev; -}; - -static struct pss_confdata pss_data; -static struct pss_confdata *devc = &pss_data; -static DEFINE_SPINLOCK(lock); - -static int pss_initialized; -static int nonstandard_microcode; -static int pss_cdrom_port = -1; /* Parameter for the PSS cdrom port */ -static bool pss_enable_joystick; /* Parameter for enabling the joystick */ -static coproc_operations pss_coproc_operations; - -static void pss_write(struct pss_confdata *devc, int data) -{ - unsigned long i, limit; - - limit = jiffies + HZ/10; /* The timeout is 0.1 seconds */ - /* - * Note! the i<5000000 is an emergency exit. The dsp_command() is sometimes - * called while interrupts are disabled. This means that the timer is - * disabled also. However the timeout situation is a abnormal condition. - * Normally the DSP should be ready to accept commands after just couple of - * loops. - */ - - for (i = 0; i < 5000000 && time_before(jiffies, limit); i++) - { - if (inw(REG(PSS_STATUS)) & PSS_WRITE_EMPTY) - { - outw(data, REG(PSS_DATA)); - return; - } - } - printk(KERN_WARNING "PSS: DSP Command (%04x) Timeout.\n", data); -} - -static int __init probe_pss(struct address_info *hw_config) -{ - unsigned short id; - int irq, dma; - - devc->base = hw_config->io_base; - irq = devc->irq = hw_config->irq; - dma = devc->dma = hw_config->dma; - devc->osp = hw_config->osp; - - if (devc->base != 0x220 && devc->base != 0x240) - if (devc->base != 0x230 && devc->base != 0x250) /* Some cards use these */ - return 0; - - if (!request_region(devc->base, 0x10, "PSS mixer, SB emulation")) { - printk(KERN_ERR "PSS: I/O port conflict\n"); - return 0; - } - id = inw(REG(PSS_ID)); - if ((id >> 8) != 'E') { - printk(KERN_ERR "No PSS signature detected at 0x%x (0x%x)\n", devc->base, id); - release_region(devc->base, 0x10); - return 0; - } - if (!request_region(devc->base + 0x10, 0x9, "PSS config")) { - printk(KERN_ERR "PSS: I/O port conflict\n"); - release_region(devc->base, 0x10); - return 0; - } - return 1; -} - -static int set_irq(struct pss_confdata *devc, int dev, int irq) -{ - static unsigned short irq_bits[16] = - { - 0x0000, 0x0000, 0x0000, 0x0008, - 0x0000, 0x0010, 0x0000, 0x0018, - 0x0000, 0x0020, 0x0028, 0x0030, - 0x0038, 0x0000, 0x0000, 0x0000 - }; - - unsigned short tmp, bits; - - if (irq < 0 || irq > 15) - return 0; - - tmp = inw(REG(dev)) & ~0x38; /* Load confreg, mask IRQ bits out */ - - if ((bits = irq_bits[irq]) == 0 && irq != 0) - { - printk(KERN_ERR "PSS: Invalid IRQ %d\n", irq); - return 0; - } - outw(tmp | bits, REG(dev)); - return 1; -} - -static void set_io_base(struct pss_confdata *devc, int dev, int base) -{ - unsigned short tmp = inw(REG(dev)) & 0x003f; - unsigned short bits = (base & 0x0ffc) << 4; - - outw(bits | tmp, REG(dev)); -} - -static int set_dma(struct pss_confdata *devc, int dev, int dma) -{ - static unsigned short dma_bits[8] = - { - 0x0001, 0x0002, 0x0000, 0x0003, - 0x0000, 0x0005, 0x0006, 0x0007 - }; - - unsigned short tmp, bits; - - if (dma < 0 || dma > 7) - return 0; - - tmp = inw(REG(dev)) & ~0x07; /* Load confreg, mask DMA bits out */ - - if ((bits = dma_bits[dma]) == 0 && dma != 4) - { - printk(KERN_ERR "PSS: Invalid DMA %d\n", dma); - return 0; - } - outw(tmp | bits, REG(dev)); - return 1; -} - -static int pss_reset_dsp(struct pss_confdata *devc) -{ - unsigned long i, limit = jiffies + HZ/10; - - outw(0x2000, REG(PSS_CONTROL)); - for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) - inw(REG(PSS_CONTROL)); - outw(0x0000, REG(PSS_CONTROL)); - return 1; -} - -static int pss_put_dspword(struct pss_confdata *devc, unsigned short word) -{ - int i, val; - - for (i = 0; i < 327680; i++) - { - val = inw(REG(PSS_STATUS)); - if (val & PSS_WRITE_EMPTY) - { - outw(word, REG(PSS_DATA)); - return 1; - } - } - return 0; -} - -static int pss_get_dspword(struct pss_confdata *devc, unsigned short *word) -{ - int i, val; - - for (i = 0; i < 327680; i++) - { - val = inw(REG(PSS_STATUS)); - if (val & PSS_READ_FULL) - { - *word = inw(REG(PSS_DATA)); - return 1; - } - } - return 0; -} - -static int pss_download_boot(struct pss_confdata *devc, unsigned char *block, - int size, int flags) -{ - int i, val, count; - unsigned long limit; - - if (flags & CPF_FIRST) - { -/*_____ Warn DSP software that a boot is coming */ - outw(0x00fe, REG(PSS_DATA)); - - limit = jiffies + HZ/10; - for (i = 0; i < 32768 && time_before(jiffies, limit); i++) - if (inw(REG(PSS_DATA)) == 0x5500) - break; - - outw(*block++, REG(PSS_DATA)); - pss_reset_dsp(devc); - } - count = 1; - while ((flags&CPF_LAST) || count<size ) - { - int j; - - for (j = 0; j < 327670; j++) - { -/*_____ Wait for BG to appear */ - if (inw(REG(PSS_STATUS)) & PSS_FLAG3) - break; - } - - if (j == 327670) - { - /* It's ok we timed out when the file was empty */ - if (count >= size && flags & CPF_LAST) - break; - else - { - printk("\n"); - printk(KERN_ERR "PSS: Download timeout problems, byte %d=%d\n", count, size); - return 0; - } - } -/*_____ Send the next byte */ - if (count >= size) - { - /* If not data in block send 0xffff */ - outw (0xffff, REG (PSS_DATA)); - } - else - { - /*_____ Send the next byte */ - outw (*block++, REG (PSS_DATA)); - } - count++; - } - - if (flags & CPF_LAST) - { -/*_____ Why */ - outw(0, REG(PSS_DATA)); - - limit = jiffies + HZ/10; - for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) - val = inw(REG(PSS_STATUS)); - - limit = jiffies + HZ/10; - for (i = 0; i < 32768 && time_after_eq(limit, jiffies); i++) - { - val = inw(REG(PSS_STATUS)); - if (val & 0x4000) - break; - } - - /* now read the version */ - for (i = 0; i < 32000; i++) - { - val = inw(REG(PSS_STATUS)); - if (val & PSS_READ_FULL) - break; - } - if (i == 32000) - return 0; - - val = inw(REG(PSS_DATA)); - /* printk( "<PSS: microcode version %d.%d loaded>", val/16, val % 16); */ - } - return 1; -} - -/* Mixer */ -static void set_master_volume(struct pss_confdata *devc, int left, int right) -{ - static unsigned char log_scale[101] = { - 0xdb, 0xe0, 0xe3, 0xe5, 0xe7, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xed, 0xee, - 0xef, 0xef, 0xf0, 0xf0, 0xf1, 0xf1, 0xf2, 0xf2, 0xf2, 0xf3, 0xf3, 0xf3, - 0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7, - 0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9, - 0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb, - 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, - 0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, - 0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, - 0xfe, 0xfe, 0xff, 0xff, 0xff - }; - pss_write(devc, 0x0010); - pss_write(devc, log_scale[left] | 0x0000); - pss_write(devc, 0x0010); - pss_write(devc, log_scale[right] | 0x0100); -} - -static void set_synth_volume(struct pss_confdata *devc, int volume) -{ - int vol = ((0x8000*volume)/100L); - pss_write(devc, 0x0080); - pss_write(devc, vol); - pss_write(devc, 0x0081); - pss_write(devc, vol); -} - -static void set_bass(struct pss_confdata *devc, int level) -{ - int vol = (int)(((0xfd - 0xf0) * level)/100L) + 0xf0; - pss_write(devc, 0x0010); - pss_write(devc, vol | 0x0200); -}; - -static void set_treble(struct pss_confdata *devc, int level) -{ - int vol = (((0xfd - 0xf0) * level)/100L) + 0xf0; - pss_write(devc, 0x0010); - pss_write(devc, vol | 0x0300); -}; - -static void pss_mixer_reset(struct pss_confdata *devc) -{ - set_master_volume(devc, 33, 33); - set_bass(devc, 50); - set_treble(devc, 50); - set_synth_volume(devc, 30); - pss_write (devc, 0x0010); - pss_write (devc, 0x0800 | 0xce); /* Stereo */ - - if(pss_mixer) - { - devc->mixer.volume_l = devc->mixer.volume_r = 33; - devc->mixer.bass = 50; - devc->mixer.treble = 50; - devc->mixer.synth = 30; - } -} - -static int set_volume_mono(unsigned __user *p, unsigned int *aleft) -{ - unsigned int left, volume; - if (get_user(volume, p)) - return -EFAULT; - - left = volume & 0xff; - if (left > 100) - left = 100; - *aleft = left; - return 0; -} - -static int set_volume_stereo(unsigned __user *p, - unsigned int *aleft, - unsigned int *aright) -{ - unsigned int left, right, volume; - if (get_user(volume, p)) - return -EFAULT; - - left = volume & 0xff; - if (left > 100) - left = 100; - right = (volume >> 8) & 0xff; - if (right > 100) - right = 100; - *aleft = left; - *aright = right; - return 0; -} - -static int ret_vol_mono(int left) -{ - return ((left << 8) | left); -} - -static int ret_vol_stereo(int left, int right) -{ - return ((right << 8) | left); -} - -static int call_ad_mixer(struct pss_confdata *devc, unsigned int cmd, - void __user *arg) -{ - if (devc->ad_mixer_dev != NO_WSS_MIXER) - return mixer_devs[devc->ad_mixer_dev]->ioctl(devc->ad_mixer_dev, cmd, arg); - else - return -EINVAL; -} - -static int pss_mixer_ioctl (int dev, unsigned int cmd, void __user *arg) -{ - struct pss_confdata *devc = mixer_devs[dev]->devc; - int cmdf = cmd & 0xff; - - if ((cmdf != SOUND_MIXER_VOLUME) && (cmdf != SOUND_MIXER_BASS) && - (cmdf != SOUND_MIXER_TREBLE) && (cmdf != SOUND_MIXER_SYNTH) && - (cmdf != SOUND_MIXER_DEVMASK) && (cmdf != SOUND_MIXER_STEREODEVS) && - (cmdf != SOUND_MIXER_RECMASK) && (cmdf != SOUND_MIXER_CAPS) && - (cmdf != SOUND_MIXER_RECSRC)) - { - return call_ad_mixer(devc, cmd, arg); - } - - if (((cmd >> 8) & 0xff) != 'M') - return -EINVAL; - - if (_SIOC_DIR (cmd) & _SIOC_WRITE) - { - switch (cmdf) - { - case SOUND_MIXER_RECSRC: - if (devc->ad_mixer_dev != NO_WSS_MIXER) - return call_ad_mixer(devc, cmd, arg); - else - { - int v; - if (get_user(v, (int __user *)arg)) - return -EFAULT; - if (v != 0) - return -EINVAL; - return 0; - } - case SOUND_MIXER_VOLUME: - if (set_volume_stereo(arg, - &devc->mixer.volume_l, - &devc->mixer.volume_r)) - return -EFAULT; - set_master_volume(devc, devc->mixer.volume_l, - devc->mixer.volume_r); - return ret_vol_stereo(devc->mixer.volume_l, - devc->mixer.volume_r); - - case SOUND_MIXER_BASS: - if (set_volume_mono(arg, &devc->mixer.bass)) - return -EFAULT; - set_bass(devc, devc->mixer.bass); - return ret_vol_mono(devc->mixer.bass); - - case SOUND_MIXER_TREBLE: - if (set_volume_mono(arg, &devc->mixer.treble)) - return -EFAULT; - set_treble(devc, devc->mixer.treble); - return ret_vol_mono(devc->mixer.treble); - - case SOUND_MIXER_SYNTH: - if (set_volume_mono(arg, &devc->mixer.synth)) - return -EFAULT; - set_synth_volume(devc, devc->mixer.synth); - return ret_vol_mono(devc->mixer.synth); - - default: - return -EINVAL; - } - } - else - { - int val, and_mask = 0, or_mask = 0; - /* - * Return parameters - */ - switch (cmdf) - { - case SOUND_MIXER_DEVMASK: - if (call_ad_mixer(devc, cmd, arg) == -EINVAL) - break; - and_mask = ~0; - or_mask = SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_SYNTH; - break; - - case SOUND_MIXER_STEREODEVS: - if (call_ad_mixer(devc, cmd, arg) == -EINVAL) - break; - and_mask = ~0; - or_mask = SOUND_MASK_VOLUME; - break; - - case SOUND_MIXER_RECMASK: - if (devc->ad_mixer_dev != NO_WSS_MIXER) - return call_ad_mixer(devc, cmd, arg); - break; - - case SOUND_MIXER_CAPS: - if (devc->ad_mixer_dev != NO_WSS_MIXER) - return call_ad_mixer(devc, cmd, arg); - or_mask = SOUND_CAP_EXCL_INPUT; - break; - - case SOUND_MIXER_RECSRC: - if (devc->ad_mixer_dev != NO_WSS_MIXER) - return call_ad_mixer(devc, cmd, arg); - break; - - case SOUND_MIXER_VOLUME: - or_mask = ret_vol_stereo(devc->mixer.volume_l, devc->mixer.volume_r); - break; - - case SOUND_MIXER_BASS: - or_mask = ret_vol_mono(devc->mixer.bass); - break; - - case SOUND_MIXER_TREBLE: - or_mask = ret_vol_mono(devc->mixer.treble); - break; - - case SOUND_MIXER_SYNTH: - or_mask = ret_vol_mono(devc->mixer.synth); - break; - default: - return -EINVAL; - } - if (get_user(val, (int __user *)arg)) - return -EFAULT; - val &= and_mask; - val |= or_mask; - if (put_user(val, (int __user *)arg)) - return -EFAULT; - return val; - } -} - -static struct mixer_operations pss_mixer_operations = -{ - .owner = THIS_MODULE, - .id = "SOUNDPORT", - .name = "PSS-AD1848", - .ioctl = pss_mixer_ioctl -}; - -static void disable_all_emulations(void) -{ - outw(0x0000, REG(CONF_PSS)); /* 0x0400 enables joystick */ - outw(0x0000, REG(CONF_WSS)); - outw(0x0000, REG(CONF_SB)); - outw(0x0000, REG(CONF_MIDI)); - outw(0x0000, REG(CONF_CDROM)); -} - -static void configure_nonsound_components(void) -{ - /* Configure Joystick port */ - - if(pss_enable_joystick) - { - outw(0x0400, REG(CONF_PSS)); /* 0x0400 enables joystick */ - printk(KERN_INFO "PSS: joystick enabled.\n"); - } - else - { - printk(KERN_INFO "PSS: joystick port not enabled.\n"); - } - - /* Configure CDROM port */ - - if (pss_cdrom_port == -1) { /* If cdrom port enablation wasn't requested */ - printk(KERN_INFO "PSS: CDROM port not enabled.\n"); - } else if (!request_region(pss_cdrom_port, 2, "PSS CDROM")) { - pss_cdrom_port = -1; - printk(KERN_ERR "PSS: CDROM I/O port conflict.\n"); - } else { - set_io_base(devc, CONF_CDROM, pss_cdrom_port); - printk(KERN_INFO "PSS: CDROM I/O port set to 0x%x.\n", pss_cdrom_port); - } -} - -static int __init attach_pss(struct address_info *hw_config) -{ - unsigned short id; - char tmp[100]; - - devc->base = hw_config->io_base; - devc->irq = hw_config->irq; - devc->dma = hw_config->dma; - devc->osp = hw_config->osp; - devc->ad_mixer_dev = NO_WSS_MIXER; - - if (!probe_pss(hw_config)) - return 0; - - id = inw(REG(PSS_ID)) & 0x00ff; - - /* - * Disable all emulations. Will be enabled later (if required). - */ - - disable_all_emulations(); - -#ifdef YOU_REALLY_WANT_TO_ALLOCATE_THESE_RESOURCES - if (sound_alloc_dma(hw_config->dma, "PSS")) - { - printk("pss.c: Can't allocate DMA channel.\n"); - release_region(hw_config->io_base, 0x10); - release_region(hw_config->io_base+0x10, 0x9); - return 0; - } - if (!set_irq(devc, CONF_PSS, devc->irq)) - { - printk("PSS: IRQ allocation error.\n"); - release_region(hw_config->io_base, 0x10); - release_region(hw_config->io_base+0x10, 0x9); - return 0; - } - if (!set_dma(devc, CONF_PSS, devc->dma)) - { - printk(KERN_ERR "PSS: DMA allocation error\n"); - release_region(hw_config->io_base, 0x10); - release_region(hw_config->io_base+0x10, 0x9); - return 0; - } -#endif - - configure_nonsound_components(); - pss_initialized = 1; - sprintf(tmp, "ECHO-PSS Rev. %d", id); - conf_printf(tmp, hw_config); - return 1; -} - -static int __init probe_pss_mpu(struct address_info *hw_config) -{ - struct resource *ports; - int timeout; - - if (!pss_initialized) - return 0; - - ports = request_region(hw_config->io_base, 2, "mpu401"); - - if (!ports) { - printk(KERN_ERR "PSS: MPU I/O port conflict\n"); - return 0; - } - set_io_base(devc, CONF_MIDI, hw_config->io_base); - if (!set_irq(devc, CONF_MIDI, hw_config->irq)) { - printk(KERN_ERR "PSS: MIDI IRQ allocation error.\n"); - goto fail; - } - if (!pss_synthLen) { - printk(KERN_ERR "PSS: Can't enable MPU. MIDI synth microcode not available.\n"); - goto fail; - } - if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST)) { - printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n"); - goto fail; - } - - /* - * Finally wait until the DSP algorithm has initialized itself and - * deactivates receive interrupt. - */ - - for (timeout = 900000; timeout > 0; timeout--) - { - if ((inb(hw_config->io_base + 1) & 0x80) == 0) /* Input data avail */ - inb(hw_config->io_base); /* Discard it */ - else - break; /* No more input */ - } - - if (!probe_mpu401(hw_config, ports)) - goto fail; - - attach_mpu401(hw_config, THIS_MODULE); /* Slot 1 */ - if (hw_config->slots[1] != -1) /* The MPU driver installed itself */ - midi_devs[hw_config->slots[1]]->coproc = &pss_coproc_operations; - return 1; -fail: - release_region(hw_config->io_base, 2); - return 0; -} - -static int pss_coproc_open(void *dev_info, int sub_device) -{ - switch (sub_device) - { - case COPR_MIDI: - if (pss_synthLen == 0) - { - printk(KERN_ERR "PSS: MIDI synth microcode not available.\n"); - return -EIO; - } - if (nonstandard_microcode) - if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST)) - { - printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n"); - return -EIO; - } - nonstandard_microcode = 0; - break; - - default: - break; - } - return 0; -} - -static void pss_coproc_close(void *dev_info, int sub_device) -{ - return; -} - -static void pss_coproc_reset(void *dev_info) -{ - if (pss_synthLen) - if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST)) - { - printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n"); - } - nonstandard_microcode = 0; -} - -static int download_boot_block(void *dev_info, copr_buffer * buf) -{ - if (buf->len <= 0 || buf->len > sizeof(buf->data)) - return -EINVAL; - - if (!pss_download_boot(devc, buf->data, buf->len, buf->flags)) - { - printk(KERN_ERR "PSS: Unable to load microcode block to DSP.\n"); - return -EIO; - } - nonstandard_microcode = 1; /* The MIDI microcode has been overwritten */ - return 0; -} - -static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local) -{ - copr_buffer *buf; - copr_msg *mbuf; - copr_debug_buf dbuf; - unsigned short tmp; - unsigned long flags; - unsigned short *data; - int i, err; - /* printk( "PSS coproc ioctl %x %x %d\n", cmd, arg, local); */ - - switch (cmd) - { - case SNDCTL_COPR_RESET: - pss_coproc_reset(dev_info); - return 0; - - case SNDCTL_COPR_LOAD: - buf = vmalloc(sizeof(copr_buffer)); - if (buf == NULL) - return -ENOSPC; - if (copy_from_user(buf, arg, sizeof(copr_buffer))) { - vfree(buf); - return -EFAULT; - } - err = download_boot_block(dev_info, buf); - vfree(buf); - return err; - - case SNDCTL_COPR_SENDMSG: - mbuf = vmalloc(sizeof(copr_msg)); - if (mbuf == NULL) - return -ENOSPC; - if (copy_from_user(mbuf, arg, sizeof(copr_msg))) { - vfree(mbuf); - return -EFAULT; - } - data = (unsigned short *)(mbuf->data); - spin_lock_irqsave(&lock, flags); - for (i = 0; i < mbuf->len; i++) { - if (!pss_put_dspword(devc, *data++)) { - spin_unlock_irqrestore(&lock,flags); - mbuf->len = i; /* feed back number of WORDs sent */ - err = copy_to_user(arg, mbuf, sizeof(copr_msg)); - vfree(mbuf); - return err ? -EFAULT : -EIO; - } - } - spin_unlock_irqrestore(&lock,flags); - vfree(mbuf); - return 0; - - case SNDCTL_COPR_RCVMSG: - err = 0; - mbuf = vmalloc(sizeof(copr_msg)); - if (mbuf == NULL) - return -ENOSPC; - data = (unsigned short *)mbuf->data; - spin_lock_irqsave(&lock, flags); - for (i = 0; i < sizeof(mbuf->data)/sizeof(unsigned short); i++) { - mbuf->len = i; /* feed back number of WORDs read */ - if (!pss_get_dspword(devc, data++)) { - if (i == 0) - err = -EIO; - break; - } - } - spin_unlock_irqrestore(&lock,flags); - if (copy_to_user(arg, mbuf, sizeof(copr_msg))) - err = -EFAULT; - vfree(mbuf); - return err; - - case SNDCTL_COPR_RDATA: - if (copy_from_user(&dbuf, arg, sizeof(dbuf))) - return -EFAULT; - spin_lock_irqsave(&lock, flags); - if (!pss_put_dspword(devc, 0x00d0)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - if (!pss_get_dspword(devc, &tmp)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - dbuf.parm1 = tmp; - spin_unlock_irqrestore(&lock,flags); - if (copy_to_user(arg, &dbuf, sizeof(dbuf))) - return -EFAULT; - return 0; - - case SNDCTL_COPR_WDATA: - if (copy_from_user(&dbuf, arg, sizeof(dbuf))) - return -EFAULT; - spin_lock_irqsave(&lock, flags); - if (!pss_put_dspword(devc, 0x00d1)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - if (!pss_put_dspword(devc, (unsigned short) (dbuf.parm1 & 0xffff))) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - tmp = (unsigned int)dbuf.parm2 & 0xffff; - if (!pss_put_dspword(devc, tmp)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - spin_unlock_irqrestore(&lock,flags); - return 0; - - case SNDCTL_COPR_WCODE: - if (copy_from_user(&dbuf, arg, sizeof(dbuf))) - return -EFAULT; - spin_lock_irqsave(&lock, flags); - if (!pss_put_dspword(devc, 0x00d3)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - tmp = (unsigned int)dbuf.parm2 & 0x00ff; - if (!pss_put_dspword(devc, tmp)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - tmp = ((unsigned int)dbuf.parm2 >> 8) & 0xffff; - if (!pss_put_dspword(devc, tmp)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - spin_unlock_irqrestore(&lock,flags); - return 0; - - case SNDCTL_COPR_RCODE: - if (copy_from_user(&dbuf, arg, sizeof(dbuf))) - return -EFAULT; - spin_lock_irqsave(&lock, flags); - if (!pss_put_dspword(devc, 0x00d2)) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) { - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - if (!pss_get_dspword(devc, &tmp)) { /* Read MSB */ - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - dbuf.parm1 = tmp << 8; - if (!pss_get_dspword(devc, &tmp)) { /* Read LSB */ - spin_unlock_irqrestore(&lock,flags); - return -EIO; - } - dbuf.parm1 |= tmp & 0x00ff; - spin_unlock_irqrestore(&lock,flags); - if (copy_to_user(arg, &dbuf, sizeof(dbuf))) - return -EFAULT; - return 0; - - default: - return -EINVAL; - } - return -EINVAL; -} - -static coproc_operations pss_coproc_operations = -{ - "ADSP-2115", - THIS_MODULE, - pss_coproc_open, - pss_coproc_close, - pss_coproc_ioctl, - pss_coproc_reset, - &pss_data -}; - -static int __init probe_pss_mss(struct address_info *hw_config) -{ - volatile int timeout; - struct resource *ports; - int my_mix = -999; /* gcc shut up */ - - if (!pss_initialized) - return 0; - - if (!request_region(hw_config->io_base, 4, "WSS config")) { - printk(KERN_ERR "PSS: WSS I/O port conflicts.\n"); - return 0; - } - ports = request_region(hw_config->io_base + 4, 4, "ad1848"); - if (!ports) { - printk(KERN_ERR "PSS: WSS I/O port conflicts.\n"); - release_region(hw_config->io_base, 4); - return 0; - } - set_io_base(devc, CONF_WSS, hw_config->io_base); - if (!set_irq(devc, CONF_WSS, hw_config->irq)) { - printk("PSS: WSS IRQ allocation error.\n"); - goto fail; - } - if (!set_dma(devc, CONF_WSS, hw_config->dma)) { - printk(KERN_ERR "PSS: WSS DMA allocation error\n"); - goto fail; - } - /* - * For some reason the card returns 0xff in the WSS status register - * immediately after boot. Probably MIDI+SB emulation algorithm - * downloaded to the ADSP2115 spends some time initializing the card. - * Let's try to wait until it finishes this task. - */ - for (timeout = 0; timeout < 100000 && (inb(hw_config->io_base + WSS_INDEX) & - WSS_INITIALIZING); timeout++) - ; - - outb((0x0b), hw_config->io_base + WSS_INDEX); /* Required by some cards */ - - for (timeout = 0; (inb(hw_config->io_base + WSS_DATA) & WSS_AUTOCALIBRATION) && - (timeout < 100000); timeout++) - ; - - if (!probe_ms_sound(hw_config, ports)) - goto fail; - - devc->ad_mixer_dev = NO_WSS_MIXER; - if (pss_mixer) - { - if ((my_mix = sound_install_mixer (MIXER_DRIVER_VERSION, - "PSS-SPEAKERS and AD1848 (through MSS audio codec)", - &pss_mixer_operations, - sizeof (struct mixer_operations), - devc)) < 0) - { - printk(KERN_ERR "Could not install PSS mixer\n"); - goto fail; - } - } - pss_mixer_reset(devc); - attach_ms_sound(hw_config, ports, THIS_MODULE); /* Slot 0 */ - - if (hw_config->slots[0] != -1) - { - /* The MSS driver installed itself */ - audio_devs[hw_config->slots[0]]->coproc = &pss_coproc_operations; - if (pss_mixer && (num_mixers == (my_mix + 2))) - { - /* The MSS mixer installed */ - devc->ad_mixer_dev = audio_devs[hw_config->slots[0]]->mixer_dev; - } - } - return 1; -fail: - release_region(hw_config->io_base + 4, 4); - release_region(hw_config->io_base, 4); - return 0; -} - -static inline void __exit unload_pss(struct address_info *hw_config) -{ - release_region(hw_config->io_base, 0x10); - release_region(hw_config->io_base+0x10, 0x9); -} - -static inline void __exit unload_pss_mpu(struct address_info *hw_config) -{ - unload_mpu401(hw_config); -} - -static inline void __exit unload_pss_mss(struct address_info *hw_config) -{ - unload_ms_sound(hw_config); -} - - -static struct address_info cfg; -static struct address_info cfg2; -static struct address_info cfg_mpu; - -static int pss_io __initdata = -1; -static int mss_io __initdata = -1; -static int mss_irq __initdata = -1; -static int mss_dma __initdata = -1; -static int mpu_io __initdata = -1; -static int mpu_irq __initdata = -1; -static bool pss_no_sound = 0; /* Just configure non-sound components */ -static bool pss_keep_settings = 1; /* Keep hardware settings at module exit */ -static char *pss_firmware = "/etc/sound/pss_synth"; - -module_param_hw(pss_io, int, ioport, 0); -MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)"); -module_param_hw(mss_io, int, ioport, 0); -MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)"); -module_param_hw(mss_irq, int, irq, 0); -MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param_hw(mss_dma, int, dma, 0); -MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)"); -module_param_hw(mpu_io, int, ioport, 0); -MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)"); -module_param_hw(mpu_irq, int, irq, 0); -MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param_hw(pss_cdrom_port, int, ioport, 0); -MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)"); -module_param(pss_enable_joystick, bool, 0); -MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)"); -module_param(pss_no_sound, bool, 0); -MODULE_PARM_DESC(pss_no_sound, "Configure sound compoents (0 - no, 1 - yes)"); -module_param(pss_keep_settings, bool, 0); -MODULE_PARM_DESC(pss_keep_settings, "Keep hardware setting at driver unloading (0 - no, 1 - yes)"); -module_param(pss_firmware, charp, 0); -MODULE_PARM_DESC(pss_firmware, "Location of the firmware file (default - /etc/sound/pss_synth)"); -module_param(pss_mixer, bool, 0); -MODULE_PARM_DESC(pss_mixer, "Enable (1) or disable (0) PSS mixer (controlling of output volume, bass, treble, synth volume). The mixer is not available on all PSS cards."); -MODULE_AUTHOR("Hannu Savolainen, Vladimir Michl"); -MODULE_DESCRIPTION("Module for PSS sound cards (based on AD1848, ADSP-2115 and ESC614). This module includes control of output amplifier and synth volume of the Beethoven ADSP-16 card (this may work with other PSS cards)."); -MODULE_LICENSE("GPL"); - - -static int fw_load = 0; -static int pssmpu = 0, pssmss = 0; - -/* - * Load a PSS sound card module - */ - -static int __init init_pss(void) -{ - - if(pss_no_sound) /* If configuring only nonsound components */ - { - cfg.io_base = pss_io; - if(!probe_pss(&cfg)) - return -ENODEV; - printk(KERN_INFO "ECHO-PSS Rev. %d\n", inw(REG(PSS_ID)) & 0x00ff); - printk(KERN_INFO "PSS: loading in no sound mode.\n"); - disable_all_emulations(); - configure_nonsound_components(); - release_region(pss_io, 0x10); - release_region(pss_io + 0x10, 0x9); - return 0; - } - - cfg.io_base = pss_io; - - cfg2.io_base = mss_io; - cfg2.irq = mss_irq; - cfg2.dma = mss_dma; - - cfg_mpu.io_base = mpu_io; - cfg_mpu.irq = mpu_irq; - - if (cfg.io_base == -1 || cfg2.io_base == -1 || cfg2.irq == -1 || cfg.dma == -1) { - printk(KERN_INFO "pss: mss_io, mss_dma, mss_irq and pss_io must be set.\n"); - return -EINVAL; - } - - if (!pss_synth) { - fw_load = 1; - pss_synthLen = mod_firmware_load(pss_firmware, (void *) &pss_synth); - } - if (!attach_pss(&cfg)) - return -ENODEV; - /* - * Attach stuff - */ - if (probe_pss_mpu(&cfg_mpu)) - pssmpu = 1; - - if (probe_pss_mss(&cfg2)) - pssmss = 1; - - return 0; -} - -static void __exit cleanup_pss(void) -{ - if(!pss_no_sound) - { - if (fw_load) - vfree(pss_synth); - if(pssmss) - unload_pss_mss(&cfg2); - if(pssmpu) - unload_pss_mpu(&cfg_mpu); - unload_pss(&cfg); - } else if (pss_cdrom_port != -1) - release_region(pss_cdrom_port, 2); - - if(!pss_keep_settings) /* Keep hardware settings if asked */ - { - disable_all_emulations(); - printk(KERN_INFO "Resetting PSS sound card configurations.\n"); - } -} - -module_init(init_pss); -module_exit(cleanup_pss); - -#ifndef MODULE -static int __init setup_pss(char *str) -{ - /* io, mss_io, mss_irq, mss_dma, mpu_io, mpu_irq */ - int ints[7]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - pss_io = ints[1]; - mss_io = ints[2]; - mss_irq = ints[3]; - mss_dma = ints[4]; - mpu_io = ints[5]; - mpu_irq = ints[6]; - - return 1; -} - -__setup("pss=", setup_pss); -#endif diff --git a/sound/oss/sb.h b/sound/oss/sb.h deleted file mode 100644 index 77e8891ce333..000000000000 --- a/sound/oss/sb.h +++ /dev/null @@ -1,185 +0,0 @@ -#define DSP_RESET (devc->base + 0x6) -#define DSP_READ (devc->base + 0xA) -#define DSP_WRITE (devc->base + 0xC) -#define DSP_COMMAND (devc->base + 0xC) -#define DSP_STATUS (devc->base + 0xC) -#define DSP_DATA_AVAIL (devc->base + 0xE) -#define DSP_DATA_AVL16 (devc->base + 0xF) -#define MIXER_ADDR (devc->base + 0x4) -#define MIXER_DATA (devc->base + 0x5) -#define OPL3_LEFT (devc->base + 0x0) -#define OPL3_RIGHT (devc->base + 0x2) -#define OPL3_BOTH (devc->base + 0x8) -/* DSP Commands */ - -#define DSP_CMD_SPKON 0xD1 -#define DSP_CMD_SPKOFF 0xD3 -#define DSP_CMD_DMAON 0xD0 -#define DSP_CMD_DMAOFF 0xD4 - -#define IMODE_NONE 0 -#define IMODE_OUTPUT PCM_ENABLE_OUTPUT -#define IMODE_INPUT PCM_ENABLE_INPUT -#define IMODE_INIT 3 -#define IMODE_MIDI 4 - -#define NORMAL_MIDI 0 -#define UART_MIDI 1 - - -/* - * Device models - */ -#define MDL_NONE 0 -#define MDL_SB1 1 /* SB1.0 or 1.5 */ -#define MDL_SB2 2 /* SB2.0 */ -#define MDL_SB201 3 /* SB2.01 */ -#define MDL_SBPRO 4 /* SB Pro */ -#define MDL_SB16 5 /* SB16/32/AWE */ -#define MDL_SBPNP 6 /* SB16/32/AWE PnP */ -#define MDL_JAZZ 10 /* Media Vision Jazz16 */ -#define MDL_SMW 11 /* Logitech SoundMan Wave (Jazz16) */ -#define MDL_ESS 12 /* ESS ES688 and ES1688 */ -#define MDL_AZTECH 13 /* Aztech Sound Galaxy family */ -#define MDL_ES1868MIDI 14 /* MIDI port of ESS1868 */ -#define MDL_AEDSP 15 /* Audio Excel DSP 16 */ -#define MDL_ESSPCI 16 /* ESS PCI card */ -#define MDL_YMPCI 17 /* Yamaha PCI sb in emulation */ - -#define SUBMDL_ALS007 42 /* ALS-007 differs from SB16 only in mixer */ - /* register assignment */ -#define SUBMDL_ALS100 43 /* ALS-100 allows sampling rates of up */ - /* to 48kHz */ - -/* - * Config flags - */ -#define SB_NO_MIDI 0x00000001 -#define SB_NO_MIXER 0x00000002 -#define SB_NO_AUDIO 0x00000004 -#define SB_NO_RECORDING 0x00000008 /* No audio recording */ -#define SB_MIDI_ONLY (SB_NO_AUDIO|SB_NO_MIXER) -#define SB_PCI_IRQ 0x00000010 /* PCI shared IRQ */ - -struct mixer_def { - unsigned int regno: 8; - unsigned int bitoffs:4; - unsigned int nbits:4; -}; - -typedef struct mixer_def mixer_tab[32][2]; -typedef struct mixer_def mixer_ent; - -struct sb_module_options -{ - int esstype; /* ESS chip type */ - int acer; /* Do acer notebook init? */ - int sm_games; /* Logitech soundman games? */ -}; - -typedef struct sb_devc { - int dev; - - /* Hardware parameters */ - int *osp; - int minor, major; - int type; - int model, submodel; - int caps; -# define SBCAP_STEREO 0x00000001 -# define SBCAP_16BITS 0x00000002 - - /* Hardware resources */ - int base; - int irq; - int dma8, dma16; - - int pcibase; /* For ESS Maestro etc */ - - /* State variables */ - int opened; - /* new audio fields for full duplex support */ - int fullduplex; - int duplex; - int speed, bits, channels; - volatile int irq_ok; - volatile int intr_active, irq_mode; - /* duplicate audio fields for full duplex support */ - volatile int intr_active_16, irq_mode_16; - - /* Mixer fields */ - int *levels; - mixer_tab *iomap; - size_t iomap_sz; /* number or records in the iomap table */ - int mixer_caps, recmask, outmask, supported_devices; - int supported_rec_devices, supported_out_devices; - int my_mixerdev; - int sbmixnum; - - /* Audio fields */ - unsigned long trg_buf; - int trigger_bits; - int trg_bytes; - int trg_intrflag; - int trg_restart; - /* duplicate audio fields for full duplex support */ - unsigned long trg_buf_16; - int trigger_bits_16; - int trg_bytes_16; - int trg_intrflag_16; - int trg_restart_16; - - unsigned char tconst; - - /* MIDI fields */ - int my_mididev; - int input_opened; - int midi_broken; - void (*midi_input_intr) (int dev, unsigned char data); - void *midi_irq_cookie; /* IRQ cookie for the midi */ - - spinlock_t lock; - - struct sb_module_options sbmo; /* Module options */ - - } sb_devc; - -/* - * PCI card types - */ - -#define SB_PCI_ESSMAESTRO 1 /* ESS Maestro Legacy */ -#define SB_PCI_YAMAHA 2 /* Yamaha Legacy */ - -/* - * Functions - */ - -int sb_dsp_command (sb_devc *devc, unsigned char val); -int sb_dsp_get_byte(sb_devc * devc); -int sb_dsp_reset (sb_devc *devc); -void sb_setmixer (sb_devc *devc, unsigned int port, unsigned int value); -unsigned int sb_getmixer (sb_devc *devc, unsigned int port); -int sb_dsp_detect (struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo); -int sb_dsp_init (struct address_info *hw_config, struct module *owner); -void sb_dsp_unload(struct address_info *hw_config, int sbmpu); -int sb_mixer_init(sb_devc *devc, struct module *owner); -void sb_mixer_unload(sb_devc *devc); -void sb_mixer_set_stereo (sb_devc *devc, int mode); -void smw_mixer_init(sb_devc *devc); -void sb_dsp_midi_init (sb_devc *devc, struct module *owner); -void sb_audio_init (sb_devc *devc, char *name, struct module *owner); -void sb_midi_interrupt (sb_devc *devc); -void sb_chgmixer (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val); -int sb_common_mixer_set(sb_devc * devc, int dev, int left, int right); - -int sb_audio_open(int dev, int mode); -void sb_audio_close(int dev); - -/* From sb_common.c */ -void sb_dsp_disable_midi(int port); -int probe_sbmpu (struct address_info *hw_config, struct module *owner); -void unload_sbmpu (struct address_info *hw_config); - -void unload_sb16(struct address_info *hw_info); -void unload_sb16midi(struct address_info *hw_info); diff --git a/sound/oss/sb_audio.c b/sound/oss/sb_audio.c deleted file mode 100644 index dc91072f4d82..000000000000 --- a/sound/oss/sb_audio.c +++ /dev/null @@ -1,1097 +0,0 @@ -/* - * sound/oss/sb_audio.c - * - * Audio routines for Sound Blaster compatible cards. - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * Changes - * Alan Cox : Formatting and clean ups - * - * Status - * Mostly working. Weird uart bug causing irq storms - * - * Daniel J. Rodriksson: Changes to make sb16 work full duplex. - * Maybe other 16 bit cards in this code could behave - * the same. - * Chris Rankin: Use spinlocks instead of CLI/STI - */ - -#include <linux/spinlock.h> - -#include "sound_config.h" - -#include "sb_mixer.h" -#include "sb.h" - -#include "sb_ess.h" - -int sb_audio_open(int dev, int mode) -{ - sb_devc *devc = audio_devs[dev]->devc; - unsigned long flags; - - if (devc == NULL) - { - printk(KERN_ERR "Sound Blaster: incomplete initialization.\n"); - return -ENXIO; - } - if (devc->caps & SB_NO_RECORDING && mode & OPEN_READ) - { - if (mode == OPEN_READ) - return -EPERM; - } - spin_lock_irqsave(&devc->lock, flags); - if (devc->opened) - { - spin_unlock_irqrestore(&devc->lock, flags); - return -EBUSY; - } - if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex) - { - if (sound_open_dma(devc->dma16, "Sound Blaster 16 bit")) - { - spin_unlock_irqrestore(&devc->lock, flags); - return -EBUSY; - } - } - devc->opened = mode; - spin_unlock_irqrestore(&devc->lock, flags); - - devc->irq_mode = IMODE_NONE; - devc->irq_mode_16 = IMODE_NONE; - devc->fullduplex = devc->duplex && - ((mode & OPEN_READ) && (mode & OPEN_WRITE)); - sb_dsp_reset(devc); - - /* At first glance this check isn't enough, some ESS chips might not - * have a RECLEV. However if they don't common_mixer_set will refuse - * cause devc->iomap has no register mapping for RECLEV - */ - if (devc->model == MDL_ESS) ess_mixer_reload (devc, SOUND_MIXER_RECLEV); - - /* The ALS007 seems to require that the DSP be removed from the output */ - /* in order for recording to be activated properly. This is done by */ - /* setting the appropriate bits of the output control register 4ch to */ - /* zero. This code assumes that the output control registers are not */ - /* used anywhere else and therefore the DSP bits are *always* ON for */ - /* output and OFF for sampling. */ - - if (devc->submodel == SUBMDL_ALS007) - { - if (mode & OPEN_READ) - sb_setmixer(devc,ALS007_OUTPUT_CTRL2, - sb_getmixer(devc,ALS007_OUTPUT_CTRL2) & 0xf9); - else - sb_setmixer(devc,ALS007_OUTPUT_CTRL2, - sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06); - } - return 0; -} - -void sb_audio_close(int dev) -{ - sb_devc *devc = audio_devs[dev]->devc; - - /* fix things if mmap turned off fullduplex */ - if(devc->duplex - && !devc->fullduplex - && (devc->opened & OPEN_READ) && (devc->opened & OPEN_WRITE)) - swap(audio_devs[dev]->dmap_out, audio_devs[dev]->dmap_in); - - audio_devs[dev]->dmap_out->dma = devc->dma8; - audio_devs[dev]->dmap_in->dma = ( devc->duplex ) ? - devc->dma16 : devc->dma8; - - if (devc->dma16 != -1 && devc->dma16 != devc->dma8 && !devc->duplex) - sound_close_dma(devc->dma16); - - /* For ALS007, turn DSP output back on if closing the device for read */ - - if ((devc->submodel == SUBMDL_ALS007) && (devc->opened & OPEN_READ)) - { - sb_setmixer(devc,ALS007_OUTPUT_CTRL2, - sb_getmixer(devc,ALS007_OUTPUT_CTRL2) | 0x06); - } - devc->opened = 0; -} - -static void sb_set_output_parms(int dev, unsigned long buf, int nr_bytes, - int intrflag) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (!devc->fullduplex || devc->bits == AFMT_S16_LE) - { - devc->trg_buf = buf; - devc->trg_bytes = nr_bytes; - devc->trg_intrflag = intrflag; - devc->irq_mode = IMODE_OUTPUT; - } - else - { - devc->trg_buf_16 = buf; - devc->trg_bytes_16 = nr_bytes; - devc->trg_intrflag_16 = intrflag; - devc->irq_mode_16 = IMODE_OUTPUT; - } -} - -static void sb_set_input_parms(int dev, unsigned long buf, int count, int intrflag) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (!devc->fullduplex || devc->bits != AFMT_S16_LE) - { - devc->trg_buf = buf; - devc->trg_bytes = count; - devc->trg_intrflag = intrflag; - devc->irq_mode = IMODE_INPUT; - } - else - { - devc->trg_buf_16 = buf; - devc->trg_bytes_16 = count; - devc->trg_intrflag_16 = intrflag; - devc->irq_mode_16 = IMODE_INPUT; - } -} - -/* - * SB1.x compatible routines - */ - -static void sb1_audio_output_block(int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - unsigned long flags; - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - count--; - - devc->irq_mode = IMODE_OUTPUT; - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x14)) /* 8 bit DAC using DMA */ - { - sb_dsp_command(devc, (unsigned char) (count & 0xff)); - sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); - } - else - printk(KERN_WARNING "Sound Blaster: unable to start DAC.\n"); - spin_unlock_irqrestore(&devc->lock, flags); - devc->intr_active = 1; -} - -static void sb1_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - unsigned long flags; - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - - /* - * Start a DMA input to the buffer pointed by dmaqtail - */ - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - count--; - - devc->irq_mode = IMODE_INPUT; - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x24)) /* 8 bit ADC using DMA */ - { - sb_dsp_command(devc, (unsigned char) (count & 0xff)); - sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); - } - else - printk(KERN_ERR "Sound Blaster: unable to start ADC.\n"); - spin_unlock_irqrestore(&devc->lock, flags); - - devc->intr_active = 1; -} - -static void sb1_audio_trigger(int dev, int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - - bits &= devc->irq_mode; - - if (!bits) - sb_dsp_command(devc, 0xd0); /* Halt DMA */ - else - { - switch (devc->irq_mode) - { - case IMODE_INPUT: - sb1_audio_start_input(dev, devc->trg_buf, devc->trg_bytes, - devc->trg_intrflag); - break; - - case IMODE_OUTPUT: - sb1_audio_output_block(dev, devc->trg_buf, devc->trg_bytes, - devc->trg_intrflag); - break; - } - } - devc->trigger_bits = bits; -} - -static int sb1_audio_prepare_for_input(int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - unsigned long flags; - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x40)) - sb_dsp_command(devc, devc->tconst); - sb_dsp_command(devc, DSP_CMD_SPKOFF); - spin_unlock_irqrestore(&devc->lock, flags); - - devc->trigger_bits = 0; - return 0; -} - -static int sb1_audio_prepare_for_output(int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - unsigned long flags; - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x40)) - sb_dsp_command(devc, devc->tconst); - sb_dsp_command(devc, DSP_CMD_SPKON); - spin_unlock_irqrestore(&devc->lock, flags); - devc->trigger_bits = 0; - return 0; -} - -static int sb1_audio_set_speed(int dev, int speed) -{ - int max_speed = 23000; - sb_devc *devc = audio_devs[dev]->devc; - int tmp; - - if (devc->opened & OPEN_READ) - max_speed = 13000; - - if (speed > 0) - { - if (speed < 4000) - speed = 4000; - - if (speed > max_speed) - speed = max_speed; - - devc->tconst = (256 - ((1000000 + speed / 2) / speed)) & 0xff; - tmp = 256 - devc->tconst; - speed = (1000000 + tmp / 2) / tmp; - - devc->speed = speed; - } - return devc->speed; -} - -static short sb1_audio_set_channels(int dev, short channels) -{ - sb_devc *devc = audio_devs[dev]->devc; - return devc->channels = 1; -} - -static unsigned int sb1_audio_set_bits(int dev, unsigned int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - return devc->bits = 8; -} - -static void sb1_audio_halt_xfer(int dev) -{ - unsigned long flags; - sb_devc *devc = audio_devs[dev]->devc; - - spin_lock_irqsave(&devc->lock, flags); - sb_dsp_reset(devc); - spin_unlock_irqrestore(&devc->lock, flags); -} - -/* - * SB 2.0 and SB 2.01 compatible routines - */ - -static void sb20_audio_output_block(int dev, unsigned long buf, int nr_bytes, - int intrflag) -{ - unsigned long flags; - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - unsigned char cmd; - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - count--; - - devc->irq_mode = IMODE_OUTPUT; - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x48)) /* DSP Block size */ - { - sb_dsp_command(devc, (unsigned char) (count & 0xff)); - sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); - - if (devc->speed * devc->channels <= 23000) - cmd = 0x1c; /* 8 bit PCM output */ - else - cmd = 0x90; /* 8 bit high speed PCM output (SB2.01/Pro) */ - - if (!sb_dsp_command(devc, cmd)) - printk(KERN_ERR "Sound Blaster: unable to start DAC.\n"); - } - else - printk(KERN_ERR "Sound Blaster: unable to start DAC.\n"); - spin_unlock_irqrestore(&devc->lock, flags); - devc->intr_active = 1; -} - -static void sb20_audio_start_input(int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - unsigned long flags; - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - unsigned char cmd; - - /* - * Start a DMA input to the buffer pointed by dmaqtail - */ - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - count--; - - devc->irq_mode = IMODE_INPUT; - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x48)) /* DSP Block size */ - { - sb_dsp_command(devc, (unsigned char) (count & 0xff)); - sb_dsp_command(devc, (unsigned char) ((count >> 8) & 0xff)); - - if (devc->speed * devc->channels <= (devc->major == 3 ? 23000 : 13000)) - cmd = 0x2c; /* 8 bit PCM input */ - else - cmd = 0x98; /* 8 bit high speed PCM input (SB2.01/Pro) */ - - if (!sb_dsp_command(devc, cmd)) - printk(KERN_ERR "Sound Blaster: unable to start ADC.\n"); - } - else - printk(KERN_ERR "Sound Blaster: unable to start ADC.\n"); - spin_unlock_irqrestore(&devc->lock, flags); - devc->intr_active = 1; -} - -static void sb20_audio_trigger(int dev, int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - bits &= devc->irq_mode; - - if (!bits) - sb_dsp_command(devc, 0xd0); /* Halt DMA */ - else - { - switch (devc->irq_mode) - { - case IMODE_INPUT: - sb20_audio_start_input(dev, devc->trg_buf, devc->trg_bytes, - devc->trg_intrflag); - break; - - case IMODE_OUTPUT: - sb20_audio_output_block(dev, devc->trg_buf, devc->trg_bytes, - devc->trg_intrflag); - break; - } - } - devc->trigger_bits = bits; -} - -/* - * SB2.01 specific speed setup - */ - -static int sb201_audio_set_speed(int dev, int speed) -{ - sb_devc *devc = audio_devs[dev]->devc; - int tmp; - int s; - - if (speed > 0) - { - if (speed < 4000) - speed = 4000; - if (speed > 44100) - speed = 44100; - if (devc->opened & OPEN_READ && speed > 15000) - speed = 15000; - s = speed * devc->channels; - devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff; - tmp = 256 - devc->tconst; - speed = ((1000000 + tmp / 2) / tmp) / devc->channels; - - devc->speed = speed; - } - return devc->speed; -} - -/* - * SB Pro specific routines - */ - -static int sbpro_audio_prepare_for_input(int dev, int bsize, int bcount) -{ /* For SB Pro and Jazz16 */ - sb_devc *devc = audio_devs[dev]->devc; - unsigned long flags; - unsigned char bits = 0; - - if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) - audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = - devc->bits == 16 ? devc->dma16 : devc->dma8; - - if (devc->model == MDL_JAZZ || devc->model == MDL_SMW) - if (devc->bits == AFMT_S16_LE) - bits = 0x04; /* 16 bit mode */ - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x40)) - sb_dsp_command(devc, devc->tconst); - sb_dsp_command(devc, DSP_CMD_SPKOFF); - if (devc->channels == 1) - sb_dsp_command(devc, 0xa0 | bits); /* Mono input */ - else - sb_dsp_command(devc, 0xa8 | bits); /* Stereo input */ - spin_unlock_irqrestore(&devc->lock, flags); - - devc->trigger_bits = 0; - return 0; -} - -static int sbpro_audio_prepare_for_output(int dev, int bsize, int bcount) -{ /* For SB Pro and Jazz16 */ - sb_devc *devc = audio_devs[dev]->devc; - unsigned long flags; - unsigned char tmp; - unsigned char bits = 0; - - if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) - audio_devs[dev]->dmap_out->dma = audio_devs[dev]->dmap_in->dma = devc->bits == 16 ? devc->dma16 : devc->dma8; - if (devc->model == MDL_SBPRO) - sb_mixer_set_stereo(devc, devc->channels == 2); - - spin_lock_irqsave(&devc->lock, flags); - if (sb_dsp_command(devc, 0x40)) - sb_dsp_command(devc, devc->tconst); - sb_dsp_command(devc, DSP_CMD_SPKON); - - if (devc->model == MDL_JAZZ || devc->model == MDL_SMW) - { - if (devc->bits == AFMT_S16_LE) - bits = 0x04; /* 16 bit mode */ - - if (devc->channels == 1) - sb_dsp_command(devc, 0xa0 | bits); /* Mono output */ - else - sb_dsp_command(devc, 0xa8 | bits); /* Stereo output */ - spin_unlock_irqrestore(&devc->lock, flags); - } - else - { - spin_unlock_irqrestore(&devc->lock, flags); - tmp = sb_getmixer(devc, 0x0e); - if (devc->channels == 1) - tmp &= ~0x02; - else - tmp |= 0x02; - sb_setmixer(devc, 0x0e, tmp); - } - devc->trigger_bits = 0; - return 0; -} - -static int sbpro_audio_set_speed(int dev, int speed) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (speed > 0) - { - if (speed < 4000) - speed = 4000; - if (speed > 44100) - speed = 44100; - if (devc->channels > 1 && speed > 22050) - speed = 22050; - sb201_audio_set_speed(dev, speed); - } - return devc->speed; -} - -static short sbpro_audio_set_channels(int dev, short channels) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (channels == 1 || channels == 2) - { - if (channels != devc->channels) - { - devc->channels = channels; - if (devc->model == MDL_SBPRO && devc->channels == 2) - sbpro_audio_set_speed(dev, devc->speed); - } - } - return devc->channels; -} - -static int jazz16_audio_set_speed(int dev, int speed) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (speed > 0) - { - int tmp; - int s; - - if (speed < 5000) - speed = 5000; - if (speed > 44100) - speed = 44100; - - s = speed * devc->channels; - - devc->tconst = (256 - ((1000000 + s / 2) / s)) & 0xff; - - tmp = 256 - devc->tconst; - speed = ((1000000 + tmp / 2) / tmp) / devc->channels; - - devc->speed = speed; - } - return devc->speed; -} - -/* - * SB16 specific routines - */ - -static int sb16_audio_set_speed(int dev, int speed) -{ - sb_devc *devc = audio_devs[dev]->devc; - int max_speed = devc->submodel == SUBMDL_ALS100 ? 48000 : 44100; - - if (speed > 0) - { - if (speed < 5000) - speed = 5000; - - if (speed > max_speed) - speed = max_speed; - - devc->speed = speed; - } - return devc->speed; -} - -static unsigned int sb16_audio_set_bits(int dev, unsigned int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (bits != 0) - { - if (bits == AFMT_U8 || bits == AFMT_S16_LE) - devc->bits = bits; - else - devc->bits = AFMT_U8; - } - - return devc->bits; -} - -static int sb16_audio_prepare_for_input(int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (!devc->fullduplex) - { - audio_devs[dev]->dmap_out->dma = - audio_devs[dev]->dmap_in->dma = - devc->bits == AFMT_S16_LE ? - devc->dma16 : devc->dma8; - } - else if (devc->bits == AFMT_S16_LE) - { - audio_devs[dev]->dmap_out->dma = devc->dma8; - audio_devs[dev]->dmap_in->dma = devc->dma16; - } - else - { - audio_devs[dev]->dmap_out->dma = devc->dma16; - audio_devs[dev]->dmap_in->dma = devc->dma8; - } - - devc->trigger_bits = 0; - return 0; -} - -static int sb16_audio_prepare_for_output(int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (!devc->fullduplex) - { - audio_devs[dev]->dmap_out->dma = - audio_devs[dev]->dmap_in->dma = - devc->bits == AFMT_S16_LE ? - devc->dma16 : devc->dma8; - } - else if (devc->bits == AFMT_S16_LE) - { - audio_devs[dev]->dmap_out->dma = devc->dma8; - audio_devs[dev]->dmap_in->dma = devc->dma16; - } - else - { - audio_devs[dev]->dmap_out->dma = devc->dma16; - audio_devs[dev]->dmap_in->dma = devc->dma8; - } - - devc->trigger_bits = 0; - return 0; -} - -static void sb16_audio_output_block(int dev, unsigned long buf, int count, - int intrflag) -{ - unsigned long flags, cnt; - sb_devc *devc = audio_devs[dev]->devc; - unsigned long bits; - - if (!devc->fullduplex || devc->bits == AFMT_S16_LE) - { - devc->irq_mode = IMODE_OUTPUT; - devc->intr_active = 1; - } - else - { - devc->irq_mode_16 = IMODE_OUTPUT; - devc->intr_active_16 = 1; - } - - /* save value */ - spin_lock_irqsave(&devc->lock, flags); - bits = devc->bits; - if (devc->fullduplex) - devc->bits = (devc->bits == AFMT_S16_LE) ? - AFMT_U8 : AFMT_S16_LE; - spin_unlock_irqrestore(&devc->lock, flags); - - cnt = count; - if (devc->bits == AFMT_S16_LE) - cnt >>= 1; - cnt--; - - spin_lock_irqsave(&devc->lock, flags); - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); */ - - sb_dsp_command(devc, 0x41); - sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff)); - sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff)); - - sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xb6 : 0xc6)); - sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) + - (devc->bits == AFMT_S16_LE ? 0x10 : 0))); - sb_dsp_command(devc, (unsigned char) (cnt & 0xff)); - sb_dsp_command(devc, (unsigned char) (cnt >> 8)); - - /* restore real value after all programming */ - devc->bits = bits; - spin_unlock_irqrestore(&devc->lock, flags); -} - - -/* - * This fails on the Cyrix MediaGX. If you don't have the DMA enabled - * before the first sample arrives it locks up. However even if you - * do enable the DMA in time you just get DMA timeouts and missing - * interrupts and stuff, so for now I've not bothered fixing this either. - */ - -static void sb16_audio_start_input(int dev, unsigned long buf, int count, int intrflag) -{ - unsigned long flags, cnt; - sb_devc *devc = audio_devs[dev]->devc; - - if (!devc->fullduplex || devc->bits != AFMT_S16_LE) - { - devc->irq_mode = IMODE_INPUT; - devc->intr_active = 1; - } - else - { - devc->irq_mode_16 = IMODE_INPUT; - devc->intr_active_16 = 1; - } - - cnt = count; - if (devc->bits == AFMT_S16_LE) - cnt >>= 1; - cnt--; - - spin_lock_irqsave(&devc->lock, flags); - - /* DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); */ - - sb_dsp_command(devc, 0x42); - sb_dsp_command(devc, (unsigned char) ((devc->speed >> 8) & 0xff)); - sb_dsp_command(devc, (unsigned char) (devc->speed & 0xff)); - - sb_dsp_command(devc, (devc->bits == AFMT_S16_LE ? 0xbe : 0xce)); - sb_dsp_command(devc, ((devc->channels == 2 ? 0x20 : 0) + - (devc->bits == AFMT_S16_LE ? 0x10 : 0))); - sb_dsp_command(devc, (unsigned char) (cnt & 0xff)); - sb_dsp_command(devc, (unsigned char) (cnt >> 8)); - - spin_unlock_irqrestore(&devc->lock, flags); -} - -static void sb16_audio_trigger(int dev, int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - - int bits_16 = bits & devc->irq_mode_16; - bits &= devc->irq_mode; - - if (!bits && !bits_16) - sb_dsp_command(devc, 0xd0); /* Halt DMA */ - else - { - if (bits) - { - switch (devc->irq_mode) - { - case IMODE_INPUT: - sb16_audio_start_input(dev, - devc->trg_buf, - devc->trg_bytes, - devc->trg_intrflag); - break; - - case IMODE_OUTPUT: - sb16_audio_output_block(dev, - devc->trg_buf, - devc->trg_bytes, - devc->trg_intrflag); - break; - } - } - if (bits_16) - { - switch (devc->irq_mode_16) - { - case IMODE_INPUT: - sb16_audio_start_input(dev, - devc->trg_buf_16, - devc->trg_bytes_16, - devc->trg_intrflag_16); - break; - - case IMODE_OUTPUT: - sb16_audio_output_block(dev, - devc->trg_buf_16, - devc->trg_bytes_16, - devc->trg_intrflag_16); - break; - } - } - } - - devc->trigger_bits = bits | bits_16; -} - -static unsigned char lbuf8[2048]; -static signed short *lbuf16 = (signed short *)lbuf8; -#define LBUFCOPYSIZE 1024 -static void -sb16_copy_from_user(int dev, - char *localbuf, int localoffs, - const char __user *userbuf, int useroffs, - int max_in, int max_out, - int *used, int *returned, - int len) -{ - sb_devc *devc = audio_devs[dev]->devc; - int i, c, p, locallen; - unsigned char *buf8; - signed short *buf16; - - /* if not duplex no conversion */ - if (!devc->fullduplex) - { - if (copy_from_user(localbuf + localoffs, - userbuf + useroffs, len)) - return; - *used = len; - *returned = len; - } - else if (devc->bits == AFMT_S16_LE) - { - /* 16 -> 8 */ - /* max_in >> 1, max number of samples in ( 16 bits ) */ - /* max_out, max number of samples out ( 8 bits ) */ - /* len, number of samples that will be taken ( 16 bits )*/ - /* c, count of samples remaining in buffer ( 16 bits )*/ - /* p, count of samples already processed ( 16 bits )*/ - len = ( (max_in >> 1) > max_out) ? max_out : (max_in >> 1); - c = len; - p = 0; - buf8 = (unsigned char *)(localbuf + localoffs); - while (c) - { - locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c); - /* << 1 in order to get 16 bit samples */ - if (copy_from_user(lbuf16, - userbuf + useroffs + (p << 1), - locallen << 1)) - return; - for (i = 0; i < locallen; i++) - { - buf8[p+i] = ~((lbuf16[i] >> 8) & 0xff) ^ 0x80; - } - c -= locallen; p += locallen; - } - /* used = ( samples * 16 bits size ) */ - *used = max_in > ( max_out << 1) ? (max_out << 1) : max_in; - /* returned = ( samples * 8 bits size ) */ - *returned = len; - } - else - { - /* 8 -> 16 */ - /* max_in, max number of samples in ( 8 bits ) */ - /* max_out >> 1, max number of samples out ( 16 bits ) */ - /* len, number of samples that will be taken ( 8 bits )*/ - /* c, count of samples remaining in buffer ( 8 bits )*/ - /* p, count of samples already processed ( 8 bits )*/ - len = max_in > (max_out >> 1) ? (max_out >> 1) : max_in; - c = len; - p = 0; - buf16 = (signed short *)(localbuf + localoffs); - while (c) - { - locallen = (c >= LBUFCOPYSIZE ? LBUFCOPYSIZE : c); - if (copy_from_user(lbuf8, - userbuf+useroffs + p, - locallen)) - return; - for (i = 0; i < locallen; i++) - { - buf16[p+i] = (~lbuf8[i] ^ 0x80) << 8; - } - c -= locallen; p += locallen; - } - /* used = ( samples * 8 bits size ) */ - *used = len; - /* returned = ( samples * 16 bits size ) */ - *returned = len << 1; - } -} - -static void -sb16_audio_mmap(int dev) -{ - sb_devc *devc = audio_devs[dev]->devc; - devc->fullduplex = 0; -} - -static struct audio_driver sb1_audio_driver = /* SB1.x */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = sb_set_output_parms, - .start_input = sb_set_input_parms, - .prepare_for_input = sb1_audio_prepare_for_input, - .prepare_for_output = sb1_audio_prepare_for_output, - .halt_io = sb1_audio_halt_xfer, - .trigger = sb1_audio_trigger, - .set_speed = sb1_audio_set_speed, - .set_bits = sb1_audio_set_bits, - .set_channels = sb1_audio_set_channels -}; - -static struct audio_driver sb20_audio_driver = /* SB2.0 */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = sb_set_output_parms, - .start_input = sb_set_input_parms, - .prepare_for_input = sb1_audio_prepare_for_input, - .prepare_for_output = sb1_audio_prepare_for_output, - .halt_io = sb1_audio_halt_xfer, - .trigger = sb20_audio_trigger, - .set_speed = sb1_audio_set_speed, - .set_bits = sb1_audio_set_bits, - .set_channels = sb1_audio_set_channels -}; - -static struct audio_driver sb201_audio_driver = /* SB2.01 */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = sb_set_output_parms, - .start_input = sb_set_input_parms, - .prepare_for_input = sb1_audio_prepare_for_input, - .prepare_for_output = sb1_audio_prepare_for_output, - .halt_io = sb1_audio_halt_xfer, - .trigger = sb20_audio_trigger, - .set_speed = sb201_audio_set_speed, - .set_bits = sb1_audio_set_bits, - .set_channels = sb1_audio_set_channels -}; - -static struct audio_driver sbpro_audio_driver = /* SB Pro */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = sb_set_output_parms, - .start_input = sb_set_input_parms, - .prepare_for_input = sbpro_audio_prepare_for_input, - .prepare_for_output = sbpro_audio_prepare_for_output, - .halt_io = sb1_audio_halt_xfer, - .trigger = sb20_audio_trigger, - .set_speed = sbpro_audio_set_speed, - .set_bits = sb1_audio_set_bits, - .set_channels = sbpro_audio_set_channels -}; - -static struct audio_driver jazz16_audio_driver = /* Jazz16 and SM Wave */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = sb_set_output_parms, - .start_input = sb_set_input_parms, - .prepare_for_input = sbpro_audio_prepare_for_input, - .prepare_for_output = sbpro_audio_prepare_for_output, - .halt_io = sb1_audio_halt_xfer, - .trigger = sb20_audio_trigger, - .set_speed = jazz16_audio_set_speed, - .set_bits = sb16_audio_set_bits, - .set_channels = sbpro_audio_set_channels -}; - -static struct audio_driver sb16_audio_driver = /* SB16 */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = sb_set_output_parms, - .start_input = sb_set_input_parms, - .prepare_for_input = sb16_audio_prepare_for_input, - .prepare_for_output = sb16_audio_prepare_for_output, - .halt_io = sb1_audio_halt_xfer, - .copy_user = sb16_copy_from_user, - .trigger = sb16_audio_trigger, - .set_speed = sb16_audio_set_speed, - .set_bits = sb16_audio_set_bits, - .set_channels = sbpro_audio_set_channels, - .mmap = sb16_audio_mmap -}; - -void sb_audio_init(sb_devc * devc, char *name, struct module *owner) -{ - int audio_flags = 0; - int format_mask = AFMT_U8; - - struct audio_driver *driver = &sb1_audio_driver; - - switch (devc->model) - { - case MDL_SB1: /* SB1.0 or SB 1.5 */ - DDB(printk("Will use standard SB1.x driver\n")); - audio_flags = DMA_HARDSTOP; - break; - - case MDL_SB2: - DDB(printk("Will use SB2.0 driver\n")); - audio_flags = DMA_AUTOMODE; - driver = &sb20_audio_driver; - break; - - case MDL_SB201: - DDB(printk("Will use SB2.01 (high speed) driver\n")); - audio_flags = DMA_AUTOMODE; - driver = &sb201_audio_driver; - break; - - case MDL_JAZZ: - case MDL_SMW: - DDB(printk("Will use Jazz16 driver\n")); - audio_flags = DMA_AUTOMODE; - format_mask |= AFMT_S16_LE; - driver = &jazz16_audio_driver; - break; - - case MDL_ESS: - DDB(printk("Will use ESS ES688/1688 driver\n")); - driver = ess_audio_init (devc, &audio_flags, &format_mask); - break; - - case MDL_SB16: - DDB(printk("Will use SB16 driver\n")); - audio_flags = DMA_AUTOMODE; - format_mask |= AFMT_S16_LE; - if (devc->dma8 != devc->dma16 && devc->dma16 != -1) - { - audio_flags |= DMA_DUPLEX; - devc->duplex = 1; - } - driver = &sb16_audio_driver; - break; - - default: - DDB(printk("Will use SB Pro driver\n")); - audio_flags = DMA_AUTOMODE; - driver = &sbpro_audio_driver; - } - - if (owner) - driver->owner = owner; - - if ((devc->dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, - name,driver, sizeof(struct audio_driver), - audio_flags, format_mask, devc, - devc->dma8, - devc->duplex ? devc->dma16 : devc->dma8)) < 0) - { - printk(KERN_ERR "Sound Blaster: unable to install audio.\n"); - return; - } - audio_devs[devc->dev]->mixer_dev = devc->my_mixerdev; - audio_devs[devc->dev]->min_fragment = 5; -} diff --git a/sound/oss/sb_card.c b/sound/oss/sb_card.c deleted file mode 100644 index 2a92cfe6cfe9..000000000000 --- a/sound/oss/sb_card.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * sound/oss/sb_card.c - * - * Detection routine for the ISA Sound Blaster and compatible sound - * cards. - * - * This file is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this - * software for more info. - * - * This is a complete rewrite of the detection routines. This was - * prompted by the PnP API change during v2.5 and the ugly state the - * code was in. - * - * Copyright (C) by Paul Laufer 2002. Based on code originally by - * Hannu Savolainen which was modified by many others over the - * years. Authors specifically mentioned in the previous version were: - * Daniel Stone, Alessandro Zummo, Jeff Garzik, Arnaldo Carvalho de - * Melo, Daniel Church, and myself. - * - * 02-05-2003 Original Release, Paul Laufer <paul@laufernet.com> - * 02-07-2003 Bug made it into first release. Take two. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/slab.h> -#include <linux/init.h> -#include "sound_config.h" -#include "sb_mixer.h" -#include "sb.h" -#ifdef CONFIG_PNP -#include <linux/pnp.h> -#endif /* CONFIG_PNP */ -#include "sb_card.h" - -MODULE_DESCRIPTION("OSS Soundblaster ISA PnP and legacy sound driver"); -MODULE_LICENSE("GPL"); - -extern void *smw_free; - -static int __initdata mpu_io = 0; -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata dma16 = -1; -static int __initdata type = 0; /* Can set this to a specific card type */ -static int __initdata esstype = 0; /* ESS chip type */ -static int __initdata acer = 0; /* Do acer notebook init? */ -static int __initdata sm_games = 0; /* Logitech soundman games? */ - -static struct sb_card_config *legacy = NULL; - -#ifdef CONFIG_PNP -static int pnp_registered; -static int __initdata pnp = 1; -/* -static int __initdata uart401 = 0; -*/ -#else -static int __initdata pnp = 0; -#endif - -module_param_hw(io, int, ioport, 000); -MODULE_PARM_DESC(io, "Soundblaster i/o base address (0x220,0x240,0x260,0x280)"); -module_param_hw(irq, int, irq, 000); -MODULE_PARM_DESC(irq, "IRQ (5,7,9,10)"); -module_param_hw(dma, int, dma, 000); -MODULE_PARM_DESC(dma, "8-bit DMA channel (0,1,3)"); -module_param_hw(dma16, int, dma, 000); -MODULE_PARM_DESC(dma16, "16-bit DMA channel (5,6,7)"); -module_param_hw(mpu_io, int, ioport, 000); -MODULE_PARM_DESC(mpu_io, "MPU base address"); -module_param(type, int, 000); -MODULE_PARM_DESC(type, "You can set this to specific card type (doesn't " \ - "work with pnp)"); -module_param(sm_games, int, 000); -MODULE_PARM_DESC(sm_games, "Enable support for Logitech soundman games " \ - "(doesn't work with pnp)"); -module_param(esstype, int, 000); -MODULE_PARM_DESC(esstype, "ESS chip type (doesn't work with pnp)"); -module_param(acer, int, 000); -MODULE_PARM_DESC(acer, "Set this to detect cards in some ACER notebooks "\ - "(doesn't work with pnp)"); - -#ifdef CONFIG_PNP -module_param(pnp, int, 000); -MODULE_PARM_DESC(pnp, "Went set to 0 will disable detection using PnP. "\ - "Default is 1.\n"); -/* Not done yet.... */ -/* -module_param(uart401, int, 000); -MODULE_PARM_DESC(uart401, "When set to 1, will attempt to detect and enable"\ - "the mpu on some clones"); -*/ -#endif /* CONFIG_PNP */ - -/* OSS subsystem card registration shared by PnP and legacy routines */ -static int sb_register_oss(struct sb_card_config *scc, struct sb_module_options *sbmo) -{ - if (!request_region(scc->conf.io_base, 16, "soundblaster")) { - printk(KERN_ERR "sb: ports busy.\n"); - kfree(scc); - return -EBUSY; - } - - if (!sb_dsp_detect(&scc->conf, 0, 0, sbmo)) { - release_region(scc->conf.io_base, 16); - printk(KERN_ERR "sb: Failed DSP Detect.\n"); - kfree(scc); - return -ENODEV; - } - if(!sb_dsp_init(&scc->conf, THIS_MODULE)) { - printk(KERN_ERR "sb: Failed DSP init.\n"); - kfree(scc); - return -ENODEV; - } - if(scc->mpucnf.io_base > 0) { - scc->mpu = 1; - printk(KERN_INFO "sb: Turning on MPU\n"); - if(!probe_sbmpu(&scc->mpucnf, THIS_MODULE)) - scc->mpu = 0; - } - - return 1; -} - -static void sb_unload(struct sb_card_config *scc) -{ - sb_dsp_unload(&scc->conf, 0); - if(scc->mpu) - unload_sbmpu(&scc->mpucnf); - kfree(scc); -} - -/* Register legacy card with OSS subsystem */ -static int __init sb_init_legacy(void) -{ - struct sb_module_options sbmo = {0}; - - if((legacy = kzalloc(sizeof(struct sb_card_config), GFP_KERNEL)) == NULL) { - printk(KERN_ERR "sb: Error: Could not allocate memory\n"); - return -ENOMEM; - } - - legacy->conf.io_base = io; - legacy->conf.irq = irq; - legacy->conf.dma = dma; - legacy->conf.dma2 = dma16; - legacy->conf.card_subtype = type; - - legacy->mpucnf.io_base = mpu_io; - legacy->mpucnf.irq = -1; - legacy->mpucnf.dma = -1; - legacy->mpucnf.dma2 = -1; - - sbmo.esstype = esstype; - sbmo.sm_games = sm_games; - sbmo.acer = acer; - - return sb_register_oss(legacy, &sbmo); -} - -#ifdef CONFIG_PNP - -/* Populate the OSS subsystem structures with information from PnP */ -static void sb_dev2cfg(struct pnp_dev *dev, struct sb_card_config *scc) -{ - scc->conf.io_base = -1; - scc->conf.irq = -1; - scc->conf.dma = -1; - scc->conf.dma2 = -1; - scc->mpucnf.io_base = -1; - scc->mpucnf.irq = -1; - scc->mpucnf.dma = -1; - scc->mpucnf.dma2 = -1; - - /* All clones layout their PnP tables differently and some use - different logical devices for the MPU */ - if(!strncmp("CTL",scc->card_id,3)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,0); - scc->conf.dma2 = pnp_dma(dev,1); - scc->mpucnf.io_base = pnp_port_start(dev,1); - return; - } - if(!strncmp("tBA",scc->card_id,3)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,0); - scc->conf.dma2 = pnp_dma(dev,1); - return; - } - if(!strncmp("ESS",scc->card_id,3)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,0); - scc->conf.dma2 = pnp_dma(dev,1); - scc->mpucnf.io_base = pnp_port_start(dev,2); - return; - } - if(!strncmp("CMI",scc->card_id,3)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,0); - scc->conf.dma2 = pnp_dma(dev,1); - return; - } - if(!strncmp("RWB",scc->card_id,3)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,0); - return; - } - if(!strncmp("ALS",scc->card_id,3)) { - if(!strncmp("ALS0007",scc->card_id,7)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,0); - } else { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,1); - scc->conf.dma2 = pnp_dma(dev,0); - } - return; - } - if(!strncmp("RTL",scc->card_id,3)) { - scc->conf.io_base = pnp_port_start(dev,0); - scc->conf.irq = pnp_irq(dev,0); - scc->conf.dma = pnp_dma(dev,1); - scc->conf.dma2 = pnp_dma(dev,0); - } -} - -static unsigned int sb_pnp_devices; - -/* Probe callback function for the PnP API */ -static int sb_pnp_probe(struct pnp_card_link *card, const struct pnp_card_device_id *card_id) -{ - struct sb_card_config *scc; - struct sb_module_options sbmo = {0}; /* Default to 0 for PnP */ - struct pnp_dev *dev = pnp_request_card_device(card, card_id->devs[0].id, NULL); - - if(!dev){ - return -EBUSY; - } - - if((scc = kzalloc(sizeof(struct sb_card_config), GFP_KERNEL)) == NULL) { - printk(KERN_ERR "sb: Error: Could not allocate memory\n"); - return -ENOMEM; - } - - printk(KERN_INFO "sb: PnP: Found Card Named = \"%s\", Card PnP id = " \ - "%s, Device PnP id = %s\n", card->card->name, card_id->id, - dev->id->id); - - scc->card_id = card_id->id; - scc->dev_id = dev->id->id; - sb_dev2cfg(dev, scc); - - printk(KERN_INFO "sb: PnP: Detected at: io=0x%x, irq=%d, " \ - "dma=%d, dma16=%d\n", scc->conf.io_base, scc->conf.irq, - scc->conf.dma, scc->conf.dma2); - - pnp_set_card_drvdata(card, scc); - sb_pnp_devices++; - - return sb_register_oss(scc, &sbmo); -} - -static void sb_pnp_remove(struct pnp_card_link *card) -{ - struct sb_card_config *scc = pnp_get_card_drvdata(card); - - if(!scc) - return; - - printk(KERN_INFO "sb: PnP: Removing %s\n", scc->card_id); - - sb_unload(scc); -} - -static struct pnp_card_driver sb_pnp_driver = { - .name = "OSS SndBlstr", /* 16 character limit */ - .id_table = sb_pnp_card_table, - .probe = sb_pnp_probe, - .remove = sb_pnp_remove, -}; -MODULE_DEVICE_TABLE(pnp_card, sb_pnp_card_table); -#endif /* CONFIG_PNP */ - -static void sb_unregister_all(void) -{ -#ifdef CONFIG_PNP - if (pnp_registered) - pnp_unregister_card_driver(&sb_pnp_driver); -#endif -} - -static int __init sb_init(void) -{ - int lres = 0; - int pres = 0; - - printk(KERN_INFO "sb: Init: Starting Probe...\n"); - - if(io != -1 && irq != -1 && dma != -1) { - printk(KERN_INFO "sb: Probing legacy card with io=%x, "\ - "irq=%d, dma=%d, dma16=%d\n",io, irq, dma, dma16); - lres = sb_init_legacy(); - } else if((io != -1 || irq != -1 || dma != -1) || - (!pnp && (io == -1 && irq == -1 && dma == -1))) - printk(KERN_ERR "sb: Error: At least io, irq, and dma "\ - "must be set for legacy cards.\n"); - -#ifdef CONFIG_PNP - if(pnp) { - int err = pnp_register_card_driver(&sb_pnp_driver); - if (!err) - pnp_registered = 1; - pres = sb_pnp_devices; - } -#endif - printk(KERN_INFO "sb: Init: Done\n"); - - /* If either PnP or Legacy registered a card then return - * success */ - if (pres == 0 && lres <= 0) { - sb_unregister_all(); - return -ENODEV; - } - return 0; -} - -static void __exit sb_exit(void) -{ - printk(KERN_INFO "sb: Unloading...\n"); - - /* Unload legacy card */ - if (legacy) { - printk (KERN_INFO "sb: Unloading legacy card\n"); - sb_unload(legacy); - } - - sb_unregister_all(); - - vfree(smw_free); - smw_free = NULL; -} - -module_init(sb_init); -module_exit(sb_exit); diff --git a/sound/oss/sb_card.h b/sound/oss/sb_card.h deleted file mode 100644 index 5535cff800df..000000000000 --- a/sound/oss/sb_card.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * sound/oss/sb_card.h - * - * This file is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this - * software for more info. - * - * 02-05-2002 Original Release, Paul Laufer <paul@laufernet.com> - */ - -struct sb_card_config { - struct address_info conf; - struct address_info mpucnf; - const char *card_id; - const char *dev_id; - int mpu; -}; - -#ifdef CONFIG_PNP - -/* - * SoundBlaster PnP tables and structures. - */ - -/* Card PnP ID Table */ -static struct pnp_card_device_id sb_pnp_card_table[] = { - /* Sound Blaster 16 */ - {.id = "CTL0024", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL0025", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL0026", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL0027", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL0028", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL0029", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL002a", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL002b", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL002c", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL00ed", .driver_data = 0, .devs = { {.id="CTL0041"}, } }, - /* Sound Blaster 16 */ - {.id = "CTL0086", .driver_data = 0, .devs = { {.id="CTL0041"}, } }, - /* Sound Blaster Vibra16S */ - {.id = "CTL0051", .driver_data = 0, .devs = { {.id="CTL0001"}, } }, - /* Sound Blaster Vibra16C */ - {.id = "CTL0070", .driver_data = 0, .devs = { {.id="CTL0001"}, } }, - /* Sound Blaster Vibra16CL */ - {.id = "CTL0080", .driver_data = 0, .devs = { {.id="CTL0041"}, } }, - /* Sound Blaster Vibra16CL */ - {.id = "CTL00F0", .driver_data = 0, .devs = { {.id="CTL0043"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0039", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0042", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0043", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0044", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0045", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0046", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0047", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0048", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL0054", .driver_data = 0, .devs = { {.id="CTL0031"}, } }, - /* Sound Blaster AWE 32 */ - {.id = "CTL009C", .driver_data = 0, .devs = { {.id="CTL0041"}, } }, - /* Createive SB32 PnP */ - {.id = "CTL009F", .driver_data = 0, .devs = { {.id="CTL0041"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL009D", .driver_data = 0, .devs = { {.id="CTL0042"}, } }, - /* Sound Blaster AWE 64 Gold */ - {.id = "CTL009E", .driver_data = 0, .devs = { {.id="CTL0044"}, } }, - /* Sound Blaster AWE 64 Gold */ - {.id = "CTL00B2", .driver_data = 0, .devs = { {.id="CTL0044"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL00C1", .driver_data = 0, .devs = { {.id="CTL0042"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL00C3", .driver_data = 0, .devs = { {.id="CTL0045"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL00C5", .driver_data = 0, .devs = { {.id="CTL0045"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL00C7", .driver_data = 0, .devs = { {.id="CTL0045"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL00E4", .driver_data = 0, .devs = { {.id="CTL0045"}, } }, - /* Sound Blaster AWE 64 */ - {.id = "CTL00E9", .driver_data = 0, .devs = { {.id="CTL0045"}, } }, - /* ESS 1868 */ - {.id = "ESS0968", .driver_data = 0, .devs = { {.id="ESS0968"}, } }, - /* ESS 1868 */ - {.id = "ESS1868", .driver_data = 0, .devs = { {.id="ESS1868"}, } }, - /* ESS 1868 */ - {.id = "ESS1868", .driver_data = 0, .devs = { {.id="ESS8611"}, } }, - /* ESS 1869 PnP AudioDrive */ - {.id = "ESS0003", .driver_data = 0, .devs = { {.id="ESS1869"}, } }, - /* ESS 1869 */ - {.id = "ESS1869", .driver_data = 0, .devs = { {.id="ESS1869"}, } }, - /* ESS 1878 */ - {.id = "ESS1878", .driver_data = 0, .devs = { {.id="ESS1878"}, } }, - /* ESS 1879 */ - {.id = "ESS1879", .driver_data = 0, .devs = { {.id="ESS1879"}, } }, - /* CMI 8330 SoundPRO */ - {.id = "CMI0001", .driver_data = 0, .devs = { {.id="@X@0001"}, - {.id="@H@0001"}, - {.id="@@@0001"}, } }, - /* Diamond DT0197H */ - {.id = "RWR1688", .driver_data = 0, .devs = { {.id="@@@0001"}, - {.id="@X@0001"}, - {.id="@H@0001"}, } }, - /* ALS007 */ - {.id = "ALS0007", .driver_data = 0, .devs = { {.id="@@@0001"}, - {.id="@X@0001"}, - {.id="@H@0001"}, } }, - /* ALS100 */ - {.id = "ALS0001", .driver_data = 0, .devs = { {.id="@@@0001"}, - {.id="@X@0001"}, - {.id="@H@0001"}, } }, - /* ALS110 */ - {.id = "ALS0110", .driver_data = 0, .devs = { {.id="@@@1001"}, - {.id="@X@1001"}, - {.id="@H@0001"}, } }, - /* ALS120 */ - {.id = "ALS0120", .driver_data = 0, .devs = { {.id="@@@2001"}, - {.id="@X@2001"}, - {.id="@H@0001"}, } }, - /* ALS200 */ - {.id = "ALS0200", .driver_data = 0, .devs = { {.id="@@@0020"}, - {.id="@X@0030"}, - {.id="@H@0001"}, } }, - /* ALS200 */ - {.id = "RTL3000", .driver_data = 0, .devs = { {.id="@@@2001"}, - {.id="@X@2001"}, - {.id="@H@0001"}, } }, - /* Sound Blaster 16 (Virtual PC 2004) */ - {.id = "tBA03b0", .driver_data = 0, .devs = { {.id="PNPb003"}, } }, - /* -end- */ - {.id = "", } -}; - -#endif diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c deleted file mode 100644 index 3d50fb4236ed..000000000000 --- a/sound/oss/sb_common.c +++ /dev/null @@ -1,1287 +0,0 @@ -/* - * sound/oss/sb_common.c - * - * Common routines for Sound Blaster compatible cards. - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts - * for full duplex support ( only sb16 by now ) - * Rolf Fokkens: Added (BETA?) support for ES1887 chips. - * (fokkensr@vertis.nl) Which means: You can adjust the recording levels. - * - * 2000/01/18 - separated sb_card and sb_common - - * Jeff Garzik <jgarzik@pobox.com> - * - * 2000/09/18 - got rid of attach_uart401 - * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - * - * 2001/01/26 - replaced CLI/STI with spinlocks - * Chris Rankin <rankinc@zipworld.com.au> - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/slab.h> - -#include "sound_config.h" -#include "sound_firmware.h" - -#include "mpu401.h" - -#include "sb_mixer.h" -#include "sb.h" -#include "sb_ess.h" - -/* - * global module flag - */ - -int sb_be_quiet; - -static sb_devc *detected_devc; /* For communication from probe to init */ -static sb_devc *last_devc; /* For MPU401 initialization */ - -static unsigned char jazz_irq_bits[] = { - 0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6 -}; - -static unsigned char jazz_dma_bits[] = { - 0, 1, 0, 2, 0, 3, 0, 4 -}; - -void *smw_free; - -/* - * Jazz16 chipset specific control variables - */ - -static int jazz16_base; /* Not detected */ -static unsigned char jazz16_bits; /* I/O relocation bits */ -static DEFINE_SPINLOCK(jazz16_lock); - -/* - * Logitech Soundman Wave specific initialization code - */ - -#ifdef SMW_MIDI0001_INCLUDED -#include "smw-midi0001.h" -#else -static unsigned char *smw_ucode; -static int smw_ucodeLen; - -#endif - -static sb_devc *last_sb; /* Last sb loaded */ - -int sb_dsp_command(sb_devc * devc, unsigned char val) -{ - int i; - unsigned long limit; - - limit = jiffies + HZ / 10; /* Timeout */ - - /* - * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes - * called while interrupts are disabled. This means that the timer is - * disabled also. However the timeout situation is a abnormal condition. - * Normally the DSP should be ready to accept commands after just couple of - * loops. - */ - - for (i = 0; i < 500000 && (limit-jiffies)>0; i++) - { - if ((inb(DSP_STATUS) & 0x80) == 0) - { - outb((val), DSP_COMMAND); - return 1; - } - } - printk(KERN_WARNING "Sound Blaster: DSP command(%x) timeout.\n", val); - return 0; -} - -int sb_dsp_get_byte(sb_devc * devc) -{ - int i; - - for (i = 1000; i; i--) - { - if (inb(DSP_DATA_AVAIL) & 0x80) - return inb(DSP_READ); - } - return 0xffff; -} - -static void sb_intr (sb_devc *devc) -{ - int status; - unsigned char src = 0xff; - - if (devc->model == MDL_SB16) - { - src = sb_getmixer(devc, IRQ_STAT); /* Interrupt source register */ - - if (src & 4) /* MPU401 interrupt */ - if(devc->midi_irq_cookie) - uart401intr(devc->irq, devc->midi_irq_cookie); - - if (!(src & 3)) - return; /* Not a DSP interrupt */ - } - if (devc->intr_active && (!devc->fullduplex || (src & 0x01))) - { - switch (devc->irq_mode) - { - case IMODE_OUTPUT: - DMAbuf_outputintr(devc->dev, 1); - break; - - case IMODE_INPUT: - DMAbuf_inputintr(devc->dev); - break; - - case IMODE_INIT: - break; - - case IMODE_MIDI: - sb_midi_interrupt(devc); - break; - - default: - /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ - ; - } - } - else if (devc->intr_active_16 && (src & 0x02)) - { - switch (devc->irq_mode_16) - { - case IMODE_OUTPUT: - DMAbuf_outputintr(devc->dev, 1); - break; - - case IMODE_INPUT: - DMAbuf_inputintr(devc->dev); - break; - - case IMODE_INIT: - break; - - default: - /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ - ; - } - } - /* - * Acknowledge interrupts - */ - - if (src & 0x01) - status = inb(DSP_DATA_AVAIL); - - if (devc->model == MDL_SB16 && src & 0x02) - status = inb(DSP_DATA_AVL16); -} - -static void pci_intr(sb_devc *devc) -{ - int src = inb(devc->pcibase+0x1A); - src&=3; - if(src) - sb_intr(devc); -} - -static irqreturn_t sbintr(int irq, void *dev_id) -{ - sb_devc *devc = dev_id; - - devc->irq_ok = 1; - - switch (devc->model) { - case MDL_ESSPCI: - pci_intr (devc); - break; - - case MDL_ESS: - ess_intr (devc); - break; - default: - sb_intr (devc); - break; - } - return IRQ_HANDLED; -} - -int sb_dsp_reset(sb_devc * devc) -{ - int loopc; - - if (devc->model == MDL_ESS) return ess_dsp_reset (devc); - - /* This is only for non-ESS chips */ - - outb(1, DSP_RESET); - - udelay(10); - outb(0, DSP_RESET); - udelay(30); - - for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++); - - if (inb(DSP_READ) != 0xAA) - { - DDB(printk("sb: No response to RESET\n")); - return 0; /* Sorry */ - } - - return 1; -} - -static void dsp_get_vers(sb_devc * devc) -{ - int i; - - unsigned long flags; - - DDB(printk("Entered dsp_get_vers()\n")); - spin_lock_irqsave(&devc->lock, flags); - devc->major = devc->minor = 0; - sb_dsp_command(devc, 0xe1); /* Get version */ - - for (i = 100000; i; i--) - { - if (inb(DSP_DATA_AVAIL) & 0x80) - { - if (devc->major == 0) - devc->major = inb(DSP_READ); - else - { - devc->minor = inb(DSP_READ); - break; - } - } - } - spin_unlock_irqrestore(&devc->lock, flags); - DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor)); -} - -static int sb16_set_dma_hw(sb_devc * devc) -{ - int bits; - - if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3) - { - printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8); - return 0; - } - bits = (1 << devc->dma8); - - if (devc->dma16 >= 5 && devc->dma16 <= 7) - bits |= (1 << devc->dma16); - - sb_setmixer(devc, DMA_NR, bits); - return 1; -} - -static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config) -{ - /* - * This routine initializes new MIDI port setup register of SB Vibra (CT2502). - */ - unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06; - - switch (hw_config->io_base) - { - case 0x300: - sb_setmixer(devc, 0x84, bits | 0x04); - break; - - case 0x330: - sb_setmixer(devc, 0x84, bits | 0x00); - break; - - default: - sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */ - printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base); - } -} - -static int sb16_set_irq_hw(sb_devc * devc, int level) -{ - int ival; - - switch (level) - { - case 5: - ival = 2; - break; - case 7: - ival = 4; - break; - case 9: - ival = 1; - break; - case 10: - ival = 8; - break; - default: - printk(KERN_ERR "SB16: Invalid IRQ%d\n", level); - return 0; - } - sb_setmixer(devc, IRQ_NR, ival); - return 1; -} - -static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config) -{ - unsigned char bits = 0; - unsigned long flags; - - if (jazz16_base != 0 && jazz16_base != hw_config->io_base) - return; - - switch (hw_config->io_base) - { - case 0x220: - bits = 1; - break; - case 0x240: - bits = 2; - break; - case 0x260: - bits = 3; - break; - default: - return; - } - bits = jazz16_bits = bits << 5; - jazz16_base = hw_config->io_base; - - /* - * Magic wake up sequence by writing to 0x201 (aka Joystick port) - */ - spin_lock_irqsave(&jazz16_lock, flags); - outb((0xAF), 0x201); - outb((0x50), 0x201); - outb((bits), 0x201); - spin_unlock_irqrestore(&jazz16_lock, flags); -} - -static int init_Jazz16(sb_devc * devc, struct address_info *hw_config) -{ - char name[100]; - /* - * First try to check that the card has Jazz16 chip. It identifies itself - * by returning 0x12 as response to DSP command 0xfa. - */ - - if (!sb_dsp_command(devc, 0xfa)) - return 0; - - if (sb_dsp_get_byte(devc) != 0x12) - return 0; - - /* - * OK so far. Now configure the IRQ and DMA channel used by the card. - */ - if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0) - { - printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq); - return 0; - } - if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0) - { - printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma); - return 0; - } - if (hw_config->dma2 < 0) - { - printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n"); - return 0; - } - if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0) - { - printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2); - return 0; - } - devc->dma16 = hw_config->dma2; - - if (!sb_dsp_command(devc, 0xfb)) - return 0; - - if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] | - (jazz_dma_bits[hw_config->dma2] << 4))) - return 0; - - if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq])) - return 0; - - /* - * Now we have configured a standard Jazz16 device. - */ - devc->model = MDL_JAZZ; - strcpy(name, "Jazz16"); - - hw_config->name = "Jazz16"; - devc->caps |= SB_NO_MIDI; - return 1; -} - -static void relocate_ess1688(sb_devc * devc) -{ - unsigned char bits; - - switch (devc->base) - { - case 0x220: - bits = 0x04; - break; - case 0x230: - bits = 0x05; - break; - case 0x240: - bits = 0x06; - break; - case 0x250: - bits = 0x07; - break; - default: - return; /* Wrong port */ - } - - DDB(printk("Doing ESS1688 address selection\n")); - - /* - * ES1688 supports two alternative ways for software address config. - * First try the so called Read-Sequence-Key method. - */ - - /* Reset the sequence logic */ - inb(0x229); - inb(0x229); - inb(0x229); - - /* Perform the read sequence */ - inb(0x22b); - inb(0x229); - inb(0x22b); - inb(0x229); - inb(0x229); - inb(0x22b); - inb(0x229); - - /* Select the base address by reading from it. Then probe using the port. */ - inb(devc->base); - if (sb_dsp_reset(devc)) /* Bingo */ - return; - -#if 0 /* This causes system lockups (Nokia 386/25 at least) */ - /* - * The last resort is the system control register method. - */ - - outb((0x00), 0xfb); /* 0xFB is the unlock register */ - outb((0x00), 0xe0); /* Select index 0 */ - outb((bits), 0xe1); /* Write the config bits */ - outb((0x00), 0xf9); /* 0xFB is the lock register */ -#endif -} - -int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo) -{ - sb_devc sb_info; - sb_devc *devc = &sb_info; - - memset((char *) &sb_info, 0, sizeof(sb_info)); /* Zero everything */ - - /* Copy module options in place */ - if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options)); - - sb_info.my_mididev = -1; - sb_info.my_mixerdev = -1; - sb_info.dev = -1; - - /* - * Initialize variables - */ - - DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base)); - - spin_lock_init(&devc->lock); - devc->type = hw_config->card_subtype; - - devc->base = hw_config->io_base; - devc->irq = hw_config->irq; - devc->dma8 = hw_config->dma; - - devc->dma16 = -1; - devc->pcibase = pciio; - - if(pci == SB_PCI_ESSMAESTRO) - { - devc->model = MDL_ESSPCI; - devc->caps |= SB_PCI_IRQ; - hw_config->driver_use_1 |= SB_PCI_IRQ; - hw_config->card_subtype = MDL_ESSPCI; - } - - if(pci == SB_PCI_YAMAHA) - { - devc->model = MDL_YMPCI; - devc->caps |= SB_PCI_IRQ; - hw_config->driver_use_1 |= SB_PCI_IRQ; - hw_config->card_subtype = MDL_YMPCI; - - printk("Yamaha PCI mode.\n"); - } - - if (devc->sbmo.acer) - { - unsigned long flags; - - spin_lock_irqsave(&devc->lock, flags); - inb(devc->base + 0x09); - inb(devc->base + 0x09); - inb(devc->base + 0x09); - inb(devc->base + 0x0b); - inb(devc->base + 0x09); - inb(devc->base + 0x0b); - inb(devc->base + 0x09); - inb(devc->base + 0x09); - inb(devc->base + 0x0b); - inb(devc->base + 0x09); - inb(devc->base + 0x00); - spin_unlock_irqrestore(&devc->lock, flags); - } - /* - * Detect the device - */ - - if (sb_dsp_reset(devc)) - dsp_get_vers(devc); - else - devc->major = 0; - - if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW) - if (devc->major == 0 || (devc->major == 3 && devc->minor == 1)) - relocate_Jazz16(devc, hw_config); - - if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0)) - relocate_ess1688(devc); - - if (!sb_dsp_reset(devc)) - { - DDB(printk("SB reset failed\n")); -#ifdef MODULE - printk(KERN_INFO "sb: dsp reset failed.\n"); -#endif - return 0; - } - if (devc->major == 0) - dsp_get_vers(devc); - - if (devc->major == 3 && devc->minor == 1) - { - if (devc->type == MDL_AZTECH) /* SG Washington? */ - { - if (sb_dsp_command(devc, 0x09)) - if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */ - { - int i; - - /* Have some delay */ - for (i = 0; i < 10000; i++) - inb(DSP_DATA_AVAIL); - devc->caps = SB_NO_AUDIO | SB_NO_MIDI; /* Mixer only */ - devc->model = MDL_AZTECH; - } - } - } - - if(devc->type == MDL_ESSPCI) - devc->model = MDL_ESSPCI; - - if(devc->type == MDL_YMPCI) - { - printk("YMPCI selected\n"); - devc->model = MDL_YMPCI; - } - - /* - * Save device information for sb_dsp_init() - */ - - - detected_devc = kmemdup(devc, sizeof(sb_devc), GFP_KERNEL); - if (detected_devc == NULL) - { - printk(KERN_ERR "sb: Can't allocate memory for device information\n"); - return 0; - } - MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base)); - return 1; -} - -int sb_dsp_init(struct address_info *hw_config, struct module *owner) -{ - sb_devc *devc; - char name[100]; - extern int sb_be_quiet; - int mixer22, mixer30; - -/* - * Check if we had detected a SB device earlier - */ - DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base)); - name[0] = 0; - - if (detected_devc == NULL) - { - MDB(printk("No detected device\n")); - return 0; - } - devc = detected_devc; - detected_devc = NULL; - - if (devc->base != hw_config->io_base) - { - DDB(printk("I/O port mismatch\n")); - release_region(devc->base, 16); - return 0; - } - /* - * Now continue initialization of the device - */ - - devc->caps = hw_config->driver_use_1; - - if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0) - { /* IRQ setup */ - - /* - * ESS PCI cards do shared PCI IRQ stuff. Since they - * will get shared PCI irq lines we must cope. - */ - - int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0; - - if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0) - { - printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq); - release_region(devc->base, 16); - return 0; - } - devc->irq_ok = 0; - - if (devc->major == 4) - if (!sb16_set_irq_hw(devc, devc->irq)) /* Unsupported IRQ */ - { - free_irq(devc->irq, devc); - release_region(devc->base, 16); - return 0; - } - if ((devc->type == 0 || devc->type == MDL_ESS) && - devc->major == 3 && devc->minor == 1) - { /* Handle various chipsets which claim they are SB Pro compatible */ - if ((devc->type != 0 && devc->type != MDL_ESS) || - !ess_init(devc, hw_config)) - { - if ((devc->type != 0 && devc->type != MDL_JAZZ && - devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config)) - { - DDB(printk("This is a genuine SB Pro\n")); - } - } - } - if (devc->major == 4 && devc->minor <= 11 ) /* Won't work */ - devc->irq_ok = 1; - else - { - int n; - - for (n = 0; n < 3 && devc->irq_ok == 0; n++) - { - if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */ - { - int i; - - for (i = 0; !devc->irq_ok && i < 10000; i++); - } - } - if (!devc->irq_ok) - printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq); - else - { - DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq)); - } - } - } /* IRQ setup */ - - last_sb = devc; - - switch (devc->major) - { - case 1: /* SB 1.0 or 1.5 */ - devc->model = hw_config->card_subtype = MDL_SB1; - break; - - case 2: /* SB 2.x */ - if (devc->minor == 0) - devc->model = hw_config->card_subtype = MDL_SB2; - else - devc->model = hw_config->card_subtype = MDL_SB201; - break; - - case 3: /* SB Pro and most clones */ - switch (devc->model) { - case 0: - devc->model = hw_config->card_subtype = MDL_SBPRO; - if (hw_config->name == NULL) - hw_config->name = "Sound Blaster Pro (8 BIT ONLY)"; - break; - case MDL_ESS: - ess_dsp_init(devc, hw_config); - break; - } - break; - - case 4: - devc->model = hw_config->card_subtype = MDL_SB16; - /* - * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0 - * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas - * a "standard" SB16 doesn't have a register at 0x4c. ALS100 actively - * updates register 0x22 whenever 0x30 changes, as per the SB16 spec. - * Since ALS007 doesn't, this can be used to differentiate the 2 cards. - */ - if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c)) - { - mixer30 = sb_getmixer(devc,0x30); - sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f); - sb_setmixer(devc,0x30,0xff); - /* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */ - /* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10. */ - if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10)) - { - devc->submodel = SUBMDL_ALS100; - if (hw_config->name == NULL) - hw_config->name = "Sound Blaster 16 (ALS-100)"; - } - else - { - sb_setmixer(devc,0x3c,0x1f); /* Enable all inputs */ - sb_setmixer(devc,0x4c,0x1f); - sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */ - devc->submodel = SUBMDL_ALS007; - if (hw_config->name == NULL) - hw_config->name = "Sound Blaster 16 (ALS-007)"; - } - sb_setmixer(devc,0x30,mixer30); - } - else if (hw_config->name == NULL) - hw_config->name = "Sound Blaster 16"; - - if (hw_config->dma2 == -1) - devc->dma16 = devc->dma8; - else if (hw_config->dma2 < 5 || hw_config->dma2 > 7) - { - printk(KERN_WARNING "SB16: Bad or missing 16 bit DMA channel\n"); - devc->dma16 = devc->dma8; - } - else - devc->dma16 = hw_config->dma2; - - if(!sb16_set_dma_hw(devc)) { - free_irq(devc->irq, devc); - release_region(hw_config->io_base, 16); - return 0; - } - - devc->caps |= SB_NO_MIDI; - } - - if (!(devc->caps & SB_NO_MIXER)) - if (devc->major == 3 || devc->major == 4) - sb_mixer_init(devc, owner); - - if (!(devc->caps & SB_NO_MIDI)) - sb_dsp_midi_init(devc, owner); - - if (hw_config->name == NULL) - hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)"; - - sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor); - conf_printf(name, hw_config); - - /* - * Assuming that a sound card is Sound Blaster (compatible) is the most common - * configuration error and the mother of all problems. Usually sound cards - * emulate SB Pro but in addition they have a 16 bit native mode which should be - * used in Unix. See Readme.cards for more information about configuring OSS/Free - * properly. - */ - if (devc->model <= MDL_SBPRO) - { - if (devc->major == 3 && devc->minor != 1) /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */ - { - printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n"); - printk(KERN_INFO "In many cases there is another way to configure OSS so that\n"); - printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n"); - printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n"); - } - else if (!sb_be_quiet && devc->model == MDL_SBPRO) - { - printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor); - printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n"); - printk(KERN_INFO "is incorrectly configured.\n"); - } - } - hw_config->card_subtype = devc->model; - hw_config->slots[0]=devc->dev; - last_devc = devc; /* For SB MPU detection */ - - if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0) - { - if (sound_alloc_dma(devc->dma8, "SoundBlaster8")) - { - printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8); - } - if (devc->dma16 >= 0 && devc->dma16 != devc->dma8) - { - if (sound_alloc_dma(devc->dma16, "SoundBlaster16")) - printk(KERN_WARNING "Sound Blaster: can't allocate 16 bit DMA channel %d.\n", devc->dma16); - } - sb_audio_init(devc, name, owner); - hw_config->slots[0]=devc->dev; - } - else - { - MDB(printk("Sound Blaster: no audio devices found.\n")); - } - return 1; -} - -/* if (sbmpu) below we allow mpu401 to manage the midi devs - otherwise we have to unload them. (Andrzej Krzysztofowicz) */ - -void sb_dsp_unload(struct address_info *hw_config, int sbmpu) -{ - sb_devc *devc; - - devc = audio_devs[hw_config->slots[0]]->devc; - - if (devc && devc->base == hw_config->io_base) - { - if ((devc->model & MDL_ESS) && devc->pcibase) - release_region(devc->pcibase, 8); - - release_region(devc->base, 16); - - if (!(devc->caps & SB_NO_AUDIO)) - { - sound_free_dma(devc->dma8); - if (devc->dma16 >= 0) - sound_free_dma(devc->dma16); - } - if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI)) - { - if (devc->irq > 0) - free_irq(devc->irq, devc); - - sb_mixer_unload(devc); - /* We don't have to do this bit any more the UART401 is its own - master -- Krzysztof Halasa */ - /* But we have to do it, if UART401 is not detected */ - if (!sbmpu) - sound_unload_mididev(devc->my_mididev); - sound_unload_audiodev(devc->dev); - } - kfree(devc); - } - else - release_region(hw_config->io_base, 16); - - kfree(detected_devc); -} - -/* - * Mixer access routines - * - * ES1887 modifications: some mixer registers reside in the - * range above 0xa0. These must be accessed in another way. - */ - -void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value) -{ - unsigned long flags; - - if (devc->model == MDL_ESS) { - ess_setmixer (devc, port, value); - return; - } - - spin_lock_irqsave(&devc->lock, flags); - - outb(((unsigned char) (port & 0xff)), MIXER_ADDR); - udelay(20); - outb(((unsigned char) (value & 0xff)), MIXER_DATA); - udelay(20); - - spin_unlock_irqrestore(&devc->lock, flags); -} - -unsigned int sb_getmixer(sb_devc * devc, unsigned int port) -{ - unsigned int val; - unsigned long flags; - - if (devc->model == MDL_ESS) return ess_getmixer (devc, port); - - spin_lock_irqsave(&devc->lock, flags); - - outb(((unsigned char) (port & 0xff)), MIXER_ADDR); - udelay(20); - val = inb(MIXER_DATA); - udelay(20); - - spin_unlock_irqrestore(&devc->lock, flags); - - return val; -} - -void sb_chgmixer - (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val) -{ - int value; - - value = sb_getmixer(devc, reg); - value = (value & ~mask) | (val & mask); - sb_setmixer(devc, reg, value); -} - -/* - * MPU401 MIDI initialization. - */ - -static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val) -{ - unsigned long flags; - - spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */ - - outb((addr & 0xff), base + 1); /* Low address bits */ - outb((addr >> 8), base + 2); /* High address bits */ - outb((val), base); /* Data */ - - spin_unlock_irqrestore(&jazz16_lock, flags); -} - -static unsigned char smw_getmem(sb_devc * devc, int base, int addr) -{ - unsigned long flags; - unsigned char val; - - spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */ - - outb((addr & 0xff), base + 1); /* Low address bits */ - outb((addr >> 8), base + 2); /* High address bits */ - val = inb(base); /* Data */ - - spin_unlock_irqrestore(&jazz16_lock, flags); - return val; -} - -static int smw_midi_init(sb_devc * devc, struct address_info *hw_config) -{ - int mpu_base = hw_config->io_base; - int mp_base = mpu_base + 4; /* Microcontroller base */ - int i; - unsigned char control; - - - /* - * Reset the microcontroller so that the RAM can be accessed - */ - - control = inb(mpu_base + 7); - outb((control | 3), mpu_base + 7); /* Set last two bits to 1 (?) */ - outb(((control & 0xfe) | 2), mpu_base + 7); /* xxxxxxx0 resets the mc */ - - mdelay(3); /* Wait at least 1ms */ - - outb((control & 0xfc), mpu_base + 7); /* xxxxxx00 enables RAM */ - - /* - * Detect microcontroller by probing the 8k RAM area - */ - smw_putmem(devc, mp_base, 0, 0x00); - smw_putmem(devc, mp_base, 1, 0xff); - udelay(10); - - if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff) - { - DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1))); - return 0; /* No RAM */ - } - /* - * There is RAM so assume it's really a SM Wave - */ - - devc->model = MDL_SMW; - smw_mixer_init(devc); - -#ifdef MODULE - if (!smw_ucode) - { - smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode); - smw_free = smw_ucode; - } -#endif - if (smw_ucodeLen > 0) - { - if (smw_ucodeLen != 8192) - { - printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n"); - return 1; - } - /* - * Download microcode - */ - - for (i = 0; i < 8192; i++) - smw_putmem(devc, mp_base, i, smw_ucode[i]); - - /* - * Verify microcode - */ - - for (i = 0; i < 8192; i++) - if (smw_getmem(devc, mp_base, i) != smw_ucode[i]) - { - printk(KERN_ERR "SM Wave: Microcode verification failed\n"); - return 0; - } - } - control = 0; -#ifdef SMW_SCSI_IRQ - /* - * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt - * is disabled by default. - * - * FIXME - make this a module option - * - * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10. - */ - { - static unsigned char scsi_irq_bits[] = { - 0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0 - }; - control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6; - } -#endif - -#ifdef SMW_OPL4_ENABLE - /* - * Make the OPL4 chip visible on the PC bus at 0x380. - * - * There is no need to enable this feature since this driver - * doesn't support OPL4 yet. Also there is no RAM in SM Wave so - * enabling OPL4 is pretty useless. - */ - control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */ - /* control |= 0x20; Uncomment this if you want to use IRQ7 */ -#endif - outb((control | 0x03), mpu_base + 7); /* xxxxxx11 restarts */ - hw_config->name = "SoundMan Wave"; - return 1; -} - -static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config) -{ - int mpu_base = hw_config->io_base; - int sb_base = devc->base; - int irq = hw_config->irq; - - unsigned char bits = 0; - unsigned long flags; - - if (irq < 0) - irq *= -1; - - if (irq < 1 || irq > 15 || - jazz_irq_bits[irq] == 0) - { - printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq); - return 0; - } - switch (sb_base) - { - case 0x220: - bits = 1; - break; - case 0x240: - bits = 2; - break; - case 0x260: - bits = 3; - break; - default: - return 0; - } - bits = jazz16_bits = bits << 5; - switch (mpu_base) - { - case 0x310: - bits |= 1; - break; - case 0x320: - bits |= 2; - break; - case 0x330: - bits |= 3; - break; - default: - printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base); - return 0; - } - /* - * Magic wake up sequence by writing to 0x201 (aka Joystick port) - */ - spin_lock_irqsave(&jazz16_lock, flags); - outb(0xAF, 0x201); - outb(0x50, 0x201); - outb(bits, 0x201); - spin_unlock_irqrestore(&jazz16_lock, flags); - - hw_config->name = "Jazz16"; - smw_midi_init(devc, hw_config); - - if (!sb_dsp_command(devc, 0xfb)) - return 0; - - if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] | - (jazz_dma_bits[devc->dma16] << 4))) - return 0; - - if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] | - (jazz_irq_bits[irq] << 4))) - return 0; - - return 1; -} - -int probe_sbmpu(struct address_info *hw_config, struct module *owner) -{ - sb_devc *devc = last_devc; - int ret; - - if (last_devc == NULL) - return 0; - - last_devc = NULL; - - if (hw_config->io_base <= 0) - { - /* The real vibra16 is fine about this, but we have to go - wipe up after Cyrix again */ - - if(devc->model == MDL_SB16 && devc->minor >= 12) - { - unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06; - sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */ - } - return 0; - } - -#if defined(CONFIG_SOUND_MPU401) - if (devc->model == MDL_ESS) - { - struct resource *ports; - ports = request_region(hw_config->io_base, 2, "mpu401"); - if (!ports) { - printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base); - return 0; - } - if (!ess_midi_init(devc, hw_config)) { - release_region(hw_config->io_base, 2); - return 0; - } - hw_config->name = "ESS1xxx MPU"; - devc->midi_irq_cookie = NULL; - if (!probe_mpu401(hw_config, ports)) { - release_region(hw_config->io_base, 2); - return 0; - } - attach_mpu401(hw_config, owner); - if (last_sb->irq == -hw_config->irq) - last_sb->midi_irq_cookie = - (void *)(long) hw_config->slots[1]; - return 1; - } -#endif - - switch (devc->model) - { - case MDL_SB16: - if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330) - { - printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base); - return 0; - } - hw_config->name = "Sound Blaster 16"; - if (hw_config->irq < 3 || hw_config->irq == devc->irq) - hw_config->irq = -devc->irq; - if (devc->minor > 12) /* What is Vibra's version??? */ - sb16_set_mpu_port(devc, hw_config); - break; - - case MDL_JAZZ: - if (hw_config->irq < 3 || hw_config->irq == devc->irq) - hw_config->irq = -devc->irq; - if (!init_Jazz16_midi(devc, hw_config)) - return 0; - break; - - case MDL_YMPCI: - hw_config->name = "Yamaha PCI Legacy"; - printk("Yamaha PCI legacy UART401 check.\n"); - break; - default: - return 0; - } - - ret = probe_uart401(hw_config, owner); - if (ret) - last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc; - return ret; -} - -void unload_sbmpu(struct address_info *hw_config) -{ -#if defined(CONFIG_SOUND_MPU401) - if (!strcmp (hw_config->name, "ESS1xxx MPU")) { - unload_mpu401(hw_config); - return; - } -#endif - unload_uart401(hw_config); -} - -EXPORT_SYMBOL(sb_dsp_init); -EXPORT_SYMBOL(sb_dsp_detect); -EXPORT_SYMBOL(sb_dsp_unload); -EXPORT_SYMBOL(sb_be_quiet); -EXPORT_SYMBOL(probe_sbmpu); -EXPORT_SYMBOL(unload_sbmpu); -EXPORT_SYMBOL(smw_free); -MODULE_LICENSE("GPL"); diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c deleted file mode 100644 index 57f7d25a2cd3..000000000000 --- a/sound/oss/sb_ess.c +++ /dev/null @@ -1,1822 +0,0 @@ -#undef FKS_LOGGING -#undef FKS_TEST - -/* - * tabs should be 4 spaces, in vi(m): set tabstop=4 - * - * TODO: consistency speed calculations!! - * cleanup! - * ????: Did I break MIDI support? - * - * History: - * - * Rolf Fokkens (Dec 20 1998): ES188x recording level support on a per - * fokkensr@vertis.nl input basis. - * (Dec 24 1998): Recognition of ES1788, ES1887, ES1888, - * ES1868, ES1869 and ES1878. Could be used for - * specific handling in the future. All except - * ES1887 and ES1888 and ES688 are handled like - * ES1688. - * (Dec 27 1998): RECLEV for all (?) ES1688+ chips. ES188x now - * have the "Dec 20" support + RECLEV - * (Jan 2 1999): Preparation for Full Duplex. This means - * Audio 2 is now used for playback when dma16 - * is specified. The next step would be to use - * Audio 1 and Audio 2 at the same time. - * (Jan 9 1999): Put all ESS stuff into sb_ess.[ch], this - * includes both the ESS stuff that has been in - * sb_*[ch] before I touched it and the ESS support - * I added later - * (Jan 23 1999): Full Duplex seems to work. I wrote a small - * test proggy which works OK. Haven't found - * any applications to test it though. So why did - * I bother to create it anyway?? :) Just for - * fun. - * (May 2 1999): I tried to be too smart by "introducing" - * ess_calc_best_speed (). The idea was that two - * dividers could be used to setup a samplerate, - * ess_calc_best_speed () would choose the best. - * This works for playback, but results in - * recording problems for high samplerates. I - * fixed this by removing ess_calc_best_speed () - * and just doing what the documentation says. - * Andy Sloane (Jun 4 1999): Stole some code from ALSA to fix the playback - * andy@guildsoftware.com speed on ES1869, ES1879, ES1887, and ES1888. - * 1879's were previously ignored by this driver; - * added (untested) support for those. - * Cvetan Ivanov (Oct 27 1999): Fixed ess_dsp_init to call ess_set_dma_hw for - * zezo@inet.bg _ALL_ ESS models, not only ES1887 - * - * This files contains ESS chip specifics. It's based on the existing ESS - * handling as it resided in sb_common.c, sb_mixer.c and sb_audio.c. This - * file adds features like: - * - Chip Identification (as shown in /proc/sound) - * - RECLEV support for ES1688 and later - * - 6 bits playback level support chips later than ES1688 - * - Recording level support on a per-device basis for ES1887 - * - Full-Duplex for ES1887 - * - * Full duplex is enabled by specifying dma16. While the normal dma must - * be one of 0, 1 or 3, dma16 can be one of 0, 1, 3 or 5. DMA 5 is a 16 bit - * DMA channel, while the others are 8 bit.. - * - * ESS detection isn't full proof (yet). If it fails an additional module - * parameter esstype can be specified to be one of the following: - * -1, 0, 688, 1688, 1868, 1869, 1788, 1887, 1888 - * -1 means: mimic 2.0 behaviour, - * 0 means: auto detect. - * others: explicitly specify chip - * -1 is default, cause auto detect still doesn't work. - */ - -/* - * About the documentation - * - * I don't know if the chips all are OK, but the documentation is buggy. 'cause - * I don't have all the cips myself, there's a lot I cannot verify. I'll try to - * keep track of my latest insights about his here. If you have additional info, - * please enlighten me (fokkensr@vertis.nl)! - * - * I had the impression that ES1688 also has 6 bit master volume control. The - * documentation about ES1888 (rev C, october '95) claims that ES1888 has - * the following features ES1688 doesn't have: - * - 6 bit master volume - * - Full Duplex - * So ES1688 apparently doesn't have 6 bit master volume control, but the - * ES1688 does have RECLEV control. Makes me wonder: does ES688 have it too? - * Without RECLEV ES688 won't be much fun I guess. - * - * From the ES1888 (rev C, october '95) documentation I got the impression - * that registers 0x68 to 0x6e don't exist which means: no recording volume - * controls. To my surprise the ES888 documentation (1/14/96) claims that - * ES888 does have these record mixer registers, but that ES1888 doesn't have - * 0x69 and 0x6b. So the rest should be there. - * - * I'm trying to get ES1887 Full Duplex. Audio 2 is playback only, while Audio 2 - * is both record and playback. I think I should use Audio 2 for all playback. - * - * The documentation is an adventure: it's close but not fully accurate. I - * found out that after a reset some registers are *NOT* reset, though the - * docs say the would be. Interesting ones are 0x7f, 0x7d and 0x7a. They are - * related to the Audio 2 channel. I also was surprised about the consequences - * of writing 0x00 to 0x7f (which should be done by reset): The ES1887 moves - * into ES1888 mode. This means that it claims IRQ 11, which happens to be my - * ISDN adapter. Needless to say it no longer worked. I now understand why - * after rebooting 0x7f already was 0x05, the value of my choice: the BIOS - * did it. - * - * Oh, and this is another trap: in ES1887 docs mixer register 0x70 is - * described as if it's exactly the same as register 0xa1. This is *NOT* true. - * The description of 0x70 in ES1869 docs is accurate however. - * Well, the assumption about ES1869 was wrong: register 0x70 is very much - * like register 0xa1, except that bit 7 is always 1, whatever you want - * it to be. - * - * When using audio 2 mixer register 0x72 seems te be meaningless. Only 0xa2 - * has effect. - * - * Software reset not being able to reset all registers is great! Especially - * the fact that register 0x78 isn't reset is great when you wanna change back - * to single dma operation (simplex): audio 2 is still operational, and uses - * the same dma as audio 1: your ess changes into a funny echo machine. - * - * Received the news that ES1688 is detected as a ES1788. Did some thinking: - * the ES1887 detection scheme suggests in step 2 to try if bit 3 of register - * 0x64 can be changed. This is inaccurate, first I inverted the * check: "If - * can be modified, it's a 1688", which lead to a correct detection - * of my ES1887. It resulted however in bad detection of 1688 (reported by mail) - * and 1868 (if no PnP detection first): they result in a 1788 being detected. - * I don't have docs on 1688, but I do have docs on 1868: The documentation is - * probably inaccurate in the fact that I should check bit 2, not bit 3. This - * is what I do now. - */ - -/* - * About recognition of ESS chips - * - * The distinction of ES688, ES1688, ES1788, ES1887 and ES1888 is described in - * a (preliminary ??) datasheet on ES1887. Its aim is to identify ES1887, but - * during detection the text claims that "this chip may be ..." when a step - * fails. This scheme is used to distinct between the above chips. - * It appears however that some PnP chips like ES1868 are recognized as ES1788 - * by the ES1887 detection scheme. These PnP chips can be detected in another - * way however: ES1868, ES1869 and ES1878 can be recognized (full proof I think) - * by repeatedly reading mixer register 0x40. This is done by ess_identify in - * sb_common.c. - * This results in the following detection steps: - * - distinct between ES688 and ES1688+ (as always done in this driver) - * if ES688 we're ready - * - try to detect ES1868, ES1869 or ES1878 - * if successful we're ready - * - try to detect ES1888, ES1887 or ES1788 - * if successful we're ready - * - Dunno. Must be 1688. Will do in general - * - * About RECLEV support: - * - * The existing ES1688 support didn't take care of the ES1688+ recording - * levels very well. Whenever a device was selected (recmask) for recording - * its recording level was loud, and it couldn't be changed. The fact that - * internal register 0xb4 could take care of RECLEV, didn't work meaning until - * its value was restored every time the chip was reset; this reset the - * value of 0xb4 too. I guess that's what 4front also had (have?) trouble with. - * - * About ES1887 support: - * - * The ES1887 has separate registers to control the recording levels, for all - * inputs. The ES1887 specific software makes these levels the same as their - * corresponding playback levels, unless recmask says they aren't recorded. In - * the latter case the recording volumes are 0. - * Now recording levels of inputs can be controlled, by changing the playback - * levels. Furthermore several devices can be recorded together (which is not - * possible with the ES1688). - * Besides the separate recording level control for each input, the common - * recording level can also be controlled by RECLEV as described above. - * - * Not only ES1887 have this recording mixer. I know the following from the - * documentation: - * ES688 no - * ES1688 no - * ES1868 no - * ES1869 yes - * ES1878 no - * ES1879 yes - * ES1888 no/yes Contradicting documentation; most recent: yes - * ES1946 yes This is a PCI chip; not handled by this driver - */ - -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> - -#include "sound_config.h" -#include "sb_mixer.h" -#include "sb.h" - -#include "sb_ess.h" - -#define ESSTYPE_LIKE20 -1 /* Mimic 2.0 behaviour */ -#define ESSTYPE_DETECT 0 /* Mimic 2.0 behaviour */ - -#define SUBMDL_ES1788 0x10 /* Subtype ES1788 for specific handling */ -#define SUBMDL_ES1868 0x11 /* Subtype ES1868 for specific handling */ -#define SUBMDL_ES1869 0x12 /* Subtype ES1869 for specific handling */ -#define SUBMDL_ES1878 0x13 /* Subtype ES1878 for specific handling */ -#define SUBMDL_ES1879 0x16 /* ES1879 was initially forgotten */ -#define SUBMDL_ES1887 0x14 /* Subtype ES1887 for specific handling */ -#define SUBMDL_ES1888 0x15 /* Subtype ES1888 for specific handling */ - -#define SB_CAP_ES18XX_RATE 0x100 - -#define ES1688_CLOCK1 795444 /* 128 - div */ -#define ES1688_CLOCK2 397722 /* 256 - div */ -#define ES18XX_CLOCK1 793800 /* 128 - div */ -#define ES18XX_CLOCK2 768000 /* 256 - div */ - -#ifdef FKS_LOGGING -static void ess_show_mixerregs (sb_devc *devc); -#endif -static int ess_read (sb_devc * devc, unsigned char reg); -static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data); -static void ess_chgmixer - (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val); - -/**************************************************************************** - * * - * ESS audio * - * * - ****************************************************************************/ - -struct ess_command {short cmd; short data;}; - -/* - * Commands for initializing Audio 1 for input (record) - */ -static struct ess_command ess_i08m[] = /* input 8 bit mono */ - { {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} }; -static struct ess_command ess_i16m[] = /* input 16 bit mono */ - { {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} }; -static struct ess_command ess_i08s[] = /* input 8 bit stereo */ - { {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} }; -static struct ess_command ess_i16s[] = /* input 16 bit stereo */ - { {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} }; - -static struct ess_command *ess_inp_cmds[] = - { ess_i08m, ess_i16m, ess_i08s, ess_i16s }; - - -/* - * Commands for initializing Audio 1 for output (playback) - */ -static struct ess_command ess_o08m[] = /* output 8 bit mono */ - { {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0xd0}, {-1, 0} }; -static struct ess_command ess_o16m[] = /* output 16 bit mono */ - { {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xf4}, {-1, 0} }; -static struct ess_command ess_o08s[] = /* output 8 bit stereo */ - { {0xb6, 0x80}, {0xb7, 0x51}, {0xb7, 0x98}, {-1, 0} }; -static struct ess_command ess_o16s[] = /* output 16 bit stereo */ - { {0xb6, 0x00}, {0xb7, 0x71}, {0xb7, 0xbc}, {-1, 0} }; - -static struct ess_command *ess_out_cmds[] = - { ess_o08m, ess_o16m, ess_o08s, ess_o16s }; - -static void ess_exec_commands - (sb_devc *devc, struct ess_command *cmdtab[]) -{ - struct ess_command *cmd; - - cmd = cmdtab [ ((devc->channels != 1) << 1) + (devc->bits != AFMT_U8) ]; - - while (cmd->cmd != -1) { - ess_write (devc, cmd->cmd, cmd->data); - cmd++; - } -} - -static void ess_change - (sb_devc *devc, unsigned int reg, unsigned int mask, unsigned int val) -{ - int value; - - value = ess_read (devc, reg); - value = (value & ~mask) | (val & mask); - ess_write (devc, reg, value); -} - -static void ess_set_output_parms - (int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (devc->duplex) { - devc->trg_buf_16 = buf; - devc->trg_bytes_16 = nr_bytes; - devc->trg_intrflag_16 = intrflag; - devc->irq_mode_16 = IMODE_OUTPUT; - } else { - devc->trg_buf = buf; - devc->trg_bytes = nr_bytes; - devc->trg_intrflag = intrflag; - devc->irq_mode = IMODE_OUTPUT; - } -} - -static void ess_set_input_parms - (int dev, unsigned long buf, int count, int intrflag) -{ - sb_devc *devc = audio_devs[dev]->devc; - - devc->trg_buf = buf; - devc->trg_bytes = count; - devc->trg_intrflag = intrflag; - devc->irq_mode = IMODE_INPUT; -} - -static int ess_calc_div (int clock, int revert, int *speedp, int *diffp) -{ - int divider; - int speed, diff; - int retval; - - speed = *speedp; - divider = (clock + speed / 2) / speed; - retval = revert - divider; - if (retval > revert - 1) { - retval = revert - 1; - divider = revert - retval; - } - /* This line is suggested. Must be wrong I think - *speedp = (clock + divider / 2) / divider; - So I chose the next one */ - - *speedp = clock / divider; - diff = speed - *speedp; - if (diff < 0) diff =-diff; - *diffp = diff; - - return retval; -} - -static int ess_calc_best_speed - (int clock1, int rev1, int clock2, int rev2, int *divp, int *speedp) -{ - int speed1 = *speedp, speed2 = *speedp; - int div1, div2; - int diff1, diff2; - int retval; - - div1 = ess_calc_div (clock1, rev1, &speed1, &diff1); - div2 = ess_calc_div (clock2, rev2, &speed2, &diff2); - - if (diff1 < diff2) { - *divp = div1; - *speedp = speed1; - retval = 1; - } else { - /* *divp = div2; */ - *divp = 0x80 | div2; - *speedp = speed2; - retval = 2; - } - - return retval; -} - -/* - * Depending on the audiochannel ESS devices can - * have different clock settings. These are made consistent for duplex - * however. - * callers of ess_speed only do an audionum suggestion, which means - * input suggests 1, output suggests 2. This suggestion is only true - * however when doing duplex. - */ -static void ess_common_speed (sb_devc *devc, int *speedp, int *divp) -{ - int diff = 0, div; - - if (devc->duplex) { - /* - * The 0x80 is important for the first audio channel - */ - if (devc->submodel == SUBMDL_ES1888) { - div = 0x80 | ess_calc_div (795500, 256, speedp, &diff); - } else { - div = 0x80 | ess_calc_div (795500, 128, speedp, &diff); - } - } else if(devc->caps & SB_CAP_ES18XX_RATE) { - if (devc->submodel == SUBMDL_ES1888) { - ess_calc_best_speed(397700, 128, 795500, 256, - &div, speedp); - } else { - ess_calc_best_speed(ES18XX_CLOCK1, 128, ES18XX_CLOCK2, 256, - &div, speedp); - } - } else { - if (*speedp > 22000) { - div = 0x80 | ess_calc_div (ES1688_CLOCK1, 256, speedp, &diff); - } else { - div = 0x00 | ess_calc_div (ES1688_CLOCK2, 128, speedp, &diff); - } - } - *divp = div; -} - -static void ess_speed (sb_devc *devc, int audionum) -{ - int speed; - int div, div2; - - ess_common_speed (devc, &(devc->speed), &div); - -#ifdef FKS_REG_LOGGING -printk (KERN_INFO "FKS: ess_speed (%d) b speed = %d, div=%x\n", audionum, devc->speed, div); -#endif - - /* Set filter roll-off to 90% of speed/2 */ - speed = (devc->speed * 9) / 20; - - div2 = 256 - 7160000 / (speed * 82); - - if (!devc->duplex) audionum = 1; - - if (audionum == 1) { - /* Change behaviour of register A1 * - sb_chg_mixer(devc, 0x71, 0x20, 0x20) - * For ES1869 only??? */ - ess_write (devc, 0xa1, div); - ess_write (devc, 0xa2, div2); - } else { - ess_setmixer (devc, 0x70, div); - /* - * FKS: fascinating: 0x72 doesn't seem to work. - */ - ess_write (devc, 0xa2, div2); - ess_setmixer (devc, 0x72, div2); - } -} - -static int ess_audio_prepare_for_input(int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - - ess_speed(devc, 1); - - sb_dsp_command(devc, DSP_CMD_SPKOFF); - - ess_write (devc, 0xb8, 0x0e); /* Auto init DMA mode */ - ess_change (devc, 0xa8, 0x03, 3 - devc->channels); /* Mono/stereo */ - ess_write (devc, 0xb9, 2); /* Demand mode (4 bytes/DMA request) */ - - ess_exec_commands (devc, ess_inp_cmds); - - ess_change (devc, 0xb1, 0xf0, 0x50); - ess_change (devc, 0xb2, 0xf0, 0x50); - - devc->trigger_bits = 0; - return 0; -} - -static int ess_audio_prepare_for_output_audio1 (int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - - sb_dsp_reset(devc); - ess_speed(devc, 1); - ess_write (devc, 0xb8, 4); /* Auto init DMA mode */ - ess_change (devc, 0xa8, 0x03, 3 - devc->channels); /* Mono/stereo */ - ess_write (devc, 0xb9, 2); /* Demand mode (4 bytes/request) */ - - ess_exec_commands (devc, ess_out_cmds); - - ess_change (devc, 0xb1, 0xf0, 0x50); /* Enable DMA */ - ess_change (devc, 0xb2, 0xf0, 0x50); /* Enable IRQ */ - - sb_dsp_command(devc, DSP_CMD_SPKON); /* There be sound! */ - - devc->trigger_bits = 0; - return 0; -} - -static int ess_audio_prepare_for_output_audio2 (int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - unsigned char bits; - -/* FKS: qqq - sb_dsp_reset(devc); -*/ - - /* - * Auto-Initialize: - * DMA mode + demand mode (8 bytes/request, yes I want it all!) - * But leave 16-bit DMA bit untouched! - */ - ess_chgmixer (devc, 0x78, 0xd0, 0xd0); - - ess_speed(devc, 2); - - /* bits 4:3 on ES1887 represent recording source. Keep them! */ - bits = ess_getmixer (devc, 0x7a) & 0x18; - - /* Set stereo/mono */ - if (devc->channels != 1) bits |= 0x02; - - /* Init DACs; UNSIGNED mode for 8 bit; SIGNED mode for 16 bit */ - if (devc->bits != AFMT_U8) bits |= 0x05; /* 16 bit */ - - /* Enable DMA, IRQ will be shared (hopefully)*/ - bits |= 0x60; - - ess_setmixer (devc, 0x7a, bits); - - ess_mixer_reload (devc, SOUND_MIXER_PCM); /* There be sound! */ - - devc->trigger_bits = 0; - return 0; -} - -static int ess_audio_prepare_for_output(int dev, int bsize, int bcount) -{ - sb_devc *devc = audio_devs[dev]->devc; - -#ifdef FKS_REG_LOGGING -printk(KERN_INFO "ess_audio_prepare_for_output: dma_out=%d,dma_in=%d\n" -, audio_devs[dev]->dmap_out->dma, audio_devs[dev]->dmap_in->dma); -#endif - - if (devc->duplex) { - return ess_audio_prepare_for_output_audio2 (dev, bsize, bcount); - } else { - return ess_audio_prepare_for_output_audio1 (dev, bsize, bcount); - } -} - -static void ess_audio_halt_xfer(int dev) -{ - unsigned long flags; - sb_devc *devc = audio_devs[dev]->devc; - - spin_lock_irqsave(&devc->lock, flags); - sb_dsp_reset(devc); - spin_unlock_irqrestore(&devc->lock, flags); - - /* - * Audio 2 may still be operational! Creates awful sounds! - */ - if (devc->duplex) ess_chgmixer(devc, 0x78, 0x03, 0x00); -} - -static void ess_audio_start_input - (int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - short c = -nr_bytes; - - /* - * Start a DMA input to the buffer pointed by dmaqtail - */ - - if (audio_devs[dev]->dmap_in->dma > 3) count >>= 1; - count--; - - devc->irq_mode = IMODE_INPUT; - - ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff)); - ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff)); - - ess_change (devc, 0xb8, 0x0f, 0x0f); /* Go */ - devc->intr_active = 1; -} - -static void ess_audio_output_block_audio1 - (int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - short c = -nr_bytes; - - if (audio_devs[dev]->dmap_out->dma > 3) - count >>= 1; - count--; - - devc->irq_mode = IMODE_OUTPUT; - - ess_write (devc, 0xa4, (unsigned char) ((unsigned short) c & 0xff)); - ess_write (devc, 0xa5, (unsigned char) (((unsigned short) c >> 8) & 0xff)); - - ess_change (devc, 0xb8, 0x05, 0x05); /* Go */ - devc->intr_active = 1; -} - -static void ess_audio_output_block_audio2 - (int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - int count = nr_bytes; - sb_devc *devc = audio_devs[dev]->devc; - short c = -nr_bytes; - - if (audio_devs[dev]->dmap_out->dma > 3) count >>= 1; - count--; - - ess_setmixer (devc, 0x74, (unsigned char) ((unsigned short) c & 0xff)); - ess_setmixer (devc, 0x76, (unsigned char) (((unsigned short) c >> 8) & 0xff)); - ess_chgmixer (devc, 0x78, 0x03, 0x03); /* Go */ - - devc->irq_mode_16 = IMODE_OUTPUT; - devc->intr_active_16 = 1; -} - -static void ess_audio_output_block - (int dev, unsigned long buf, int nr_bytes, int intrflag) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (devc->duplex) { - ess_audio_output_block_audio2 (dev, buf, nr_bytes, intrflag); - } else { - ess_audio_output_block_audio1 (dev, buf, nr_bytes, intrflag); - } -} - -/* - * FKS: the if-statements for both bits and bits_16 are quite alike. - * Combine this... - */ -static void ess_audio_trigger(int dev, int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - - int bits_16 = bits & devc->irq_mode_16; - bits &= devc->irq_mode; - - if (!bits && !bits_16) { - /* FKS oh oh.... wrong?? for dma 16? */ - sb_dsp_command(devc, 0xd0); /* Halt DMA */ - } - - if (bits) { - switch (devc->irq_mode) - { - case IMODE_INPUT: - ess_audio_start_input(dev, devc->trg_buf, devc->trg_bytes, - devc->trg_intrflag); - break; - - case IMODE_OUTPUT: - ess_audio_output_block(dev, devc->trg_buf, devc->trg_bytes, - devc->trg_intrflag); - break; - } - } - - if (bits_16) { - switch (devc->irq_mode_16) { - case IMODE_INPUT: - ess_audio_start_input(dev, devc->trg_buf_16, devc->trg_bytes_16, - devc->trg_intrflag_16); - break; - - case IMODE_OUTPUT: - ess_audio_output_block(dev, devc->trg_buf_16, devc->trg_bytes_16, - devc->trg_intrflag_16); - break; - } - } - - devc->trigger_bits = bits | bits_16; -} - -static int ess_audio_set_speed(int dev, int speed) -{ - sb_devc *devc = audio_devs[dev]->devc; - int minspeed, maxspeed, dummydiv; - - if (speed > 0) { - minspeed = (devc->duplex ? 6215 : 5000 ); - maxspeed = (devc->duplex ? 44100 : 48000); - if (speed < minspeed) speed = minspeed; - if (speed > maxspeed) speed = maxspeed; - - ess_common_speed (devc, &speed, &dummydiv); - - devc->speed = speed; - } - return devc->speed; -} - -/* - * FKS: This is a one-on-one copy of sb1_audio_set_bits - */ -static unsigned int ess_audio_set_bits(int dev, unsigned int bits) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (bits != 0) { - if (bits == AFMT_U8 || bits == AFMT_S16_LE) { - devc->bits = bits; - } else { - devc->bits = AFMT_U8; - } - } - - return devc->bits; -} - -/* - * FKS: This is a one-on-one copy of sbpro_audio_set_channels - * (*) Modified it!! - */ -static short ess_audio_set_channels(int dev, short channels) -{ - sb_devc *devc = audio_devs[dev]->devc; - - if (channels == 1 || channels == 2) devc->channels = channels; - - return devc->channels; -} - -static struct audio_driver ess_audio_driver = /* ESS ES688/1688 */ -{ - .owner = THIS_MODULE, - .open = sb_audio_open, - .close = sb_audio_close, - .output_block = ess_set_output_parms, - .start_input = ess_set_input_parms, - .prepare_for_input = ess_audio_prepare_for_input, - .prepare_for_output = ess_audio_prepare_for_output, - .halt_io = ess_audio_halt_xfer, - .trigger = ess_audio_trigger, - .set_speed = ess_audio_set_speed, - .set_bits = ess_audio_set_bits, - .set_channels = ess_audio_set_channels -}; - -/* - * ess_audio_init must be called from sb_audio_init - */ -struct audio_driver *ess_audio_init - (sb_devc *devc, int *audio_flags, int *format_mask) -{ - *audio_flags = DMA_AUTOMODE; - *format_mask |= AFMT_S16_LE; - - if (devc->duplex) { - int tmp_dma; - /* - * sb_audio_init thinks dma8 is for playback and - * dma16 is for record. Not now! So swap them. - */ - tmp_dma = devc->dma16; - devc->dma16 = devc->dma8; - devc->dma8 = tmp_dma; - - *audio_flags |= DMA_DUPLEX; - } - - return &ess_audio_driver; -} - -/**************************************************************************** - * * - * ESS common * - * * - ****************************************************************************/ -static void ess_handle_channel - (char *channel, int dev, int intr_active, unsigned char flag, int irq_mode) -{ - if (!intr_active || !flag) return; -#ifdef FKS_REG_LOGGING -printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode); -#endif - switch (irq_mode) { - case IMODE_OUTPUT: - DMAbuf_outputintr (dev, 1); - break; - - case IMODE_INPUT: - DMAbuf_inputintr (dev); - break; - - case IMODE_INIT: - break; - - default:; - /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */ - } -} - -/* - * FKS: TODO!!! Finish this! - * - * I think midi stuff uses uart401, without interrupts. - * So IMODE_MIDI isn't a value for devc->irq_mode. - */ -void ess_intr (sb_devc *devc) -{ - int status; - unsigned char src; - - if (devc->submodel == SUBMDL_ES1887) { - src = ess_getmixer (devc, 0x7f) >> 4; - } else { - src = 0xff; - } - -#ifdef FKS_REG_LOGGING -printk(KERN_INFO "FKS: sbintr src=%x\n",(int)src); -#endif - ess_handle_channel - ( "Audio 1" - , devc->dev, devc->intr_active , src & 0x01, devc->irq_mode ); - ess_handle_channel - ( "Audio 2" - , devc->dev, devc->intr_active_16, src & 0x02, devc->irq_mode_16); - /* - * Acknowledge interrupts - */ - if (devc->submodel == SUBMDL_ES1887 && (src & 0x02)) { - ess_chgmixer (devc, 0x7a, 0x80, 0x00); - } - - if (src & 0x01) { - status = inb(DSP_DATA_AVAIL); - } -} - -static void ess_extended (sb_devc * devc) -{ - /* Enable extended mode */ - - sb_dsp_command(devc, 0xc6); -} - -static int ess_write (sb_devc * devc, unsigned char reg, unsigned char data) -{ -#ifdef FKS_REG_LOGGING -printk(KERN_INFO "FKS: write reg %x: %x\n", reg, data); -#endif - /* Write a byte to an extended mode register of ES1688 */ - - if (!sb_dsp_command(devc, reg)) - return 0; - - return sb_dsp_command(devc, data); -} - -static int ess_read (sb_devc * devc, unsigned char reg) -{ - /* Read a byte from an extended mode register of ES1688 */ - - /* Read register command */ - if (!sb_dsp_command(devc, 0xc0)) return -1; - - if (!sb_dsp_command(devc, reg )) return -1; - - return sb_dsp_get_byte(devc); -} - -int ess_dsp_reset(sb_devc * devc) -{ - int loopc; - -#ifdef FKS_REG_LOGGING -printk(KERN_INFO "FKS: ess_dsp_reset 1\n"); -ess_show_mixerregs (devc); -#endif - - outb(3, DSP_RESET); /* Reset FIFO too */ - - udelay(10); - outb(0, DSP_RESET); - udelay(30); - - for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++); - - if (inb(DSP_READ) != 0xAA) { - DDB(printk("sb: No response to RESET\n")); - return 0; /* Sorry */ - } - ess_extended (devc); - -#ifdef FKS_LOGGING -printk(KERN_INFO "FKS: dsp_reset 2\n"); -ess_show_mixerregs (devc); -#endif - - return 1; -} - -static int ess_irq_bits (int irq) -{ - switch (irq) { - case 2: - case 9: - return 0; - - case 5: - return 1; - - case 7: - return 2; - - case 10: - return 3; - - default: - printk(KERN_ERR "ESS1688: Invalid IRQ %d\n", irq); - return -1; - } -} - -/* - * Set IRQ configuration register for all ESS models - */ -static int ess_common_set_irq_hw (sb_devc * devc) -{ - int irq_bits; - - if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return 0; - - if (!ess_write (devc, 0xb1, 0x50 | (irq_bits << 2))) { - printk(KERN_ERR "ES1688: Failed to write to IRQ config register\n"); - return 0; - } - return 1; -} - -/* - * I wanna use modern ES1887 mixer irq handling. Funny is the - * fact that my BIOS wants the same. But suppose someone's BIOS - * doesn't do this! - * This is independent of duplex. If there's a 1887 this will - * prevent it from going into 1888 mode. - */ -static void ess_es1887_set_irq_hw (sb_devc * devc) -{ - int irq_bits; - - if ((irq_bits = ess_irq_bits (devc->irq)) == -1) return; - - ess_chgmixer (devc, 0x7f, 0x0f, 0x01 | ((irq_bits + 1) << 1)); -} - -static int ess_set_irq_hw (sb_devc * devc) -{ - if (devc->submodel == SUBMDL_ES1887) ess_es1887_set_irq_hw (devc); - - return ess_common_set_irq_hw (devc); -} - -#ifdef FKS_TEST - -/* - * FKS_test: - * for ES1887: 00, 18, non wr bits: 0001 1000 - * for ES1868: 00, b8, non wr bits: 1011 1000 - * for ES1888: 00, f8, non wr bits: 1111 1000 - * for ES1688: 00, f8, non wr bits: 1111 1000 - * + ES968 - */ - -static void FKS_test (sb_devc * devc) -{ - int val1, val2; - val1 = ess_getmixer (devc, 0x64); - ess_setmixer (devc, 0x64, ~val1); - val2 = ess_getmixer (devc, 0x64) ^ ~val1; - ess_setmixer (devc, 0x64, val1); - val1 ^= ess_getmixer (devc, 0x64); -printk (KERN_INFO "FKS: FKS_test %02x, %02x\n", (val1 & 0x0ff), (val2 & 0x0ff)); -}; -#endif - -static unsigned int ess_identify (sb_devc * devc) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&devc->lock, flags); - outb(((unsigned char) (0x40 & 0xff)), MIXER_ADDR); - - udelay(20); - val = inb(MIXER_DATA) << 8; - udelay(20); - val |= inb(MIXER_DATA); - udelay(20); - spin_unlock_irqrestore(&devc->lock, flags); - - return val; -} - -/* - * ESS technology describes a detection scheme in their docs. It involves - * fiddling with the bits in certain mixer registers. ess_probe is supposed - * to help. - * - * FKS: tracing shows ess_probe writes wrong value to 0x64. Bit 3 reads 1, but - * should be written 0 only. Check this. - */ -static int ess_probe (sb_devc * devc, int reg, int xorval) -{ - int val1, val2, val3; - - val1 = ess_getmixer (devc, reg); - val2 = val1 ^ xorval; - ess_setmixer (devc, reg, val2); - val3 = ess_getmixer (devc, reg); - ess_setmixer (devc, reg, val1); - - return (val2 == val3); -} - -int ess_init(sb_devc * devc, struct address_info *hw_config) -{ - unsigned char cfg; - int ess_major = 0, ess_minor = 0; - int i; - static char name[100], modelname[10]; - - /* - * Try to detect ESS chips. - */ - - sb_dsp_command(devc, 0xe7); /* Return identification */ - - for (i = 1000; i; i--) { - if (inb(DSP_DATA_AVAIL) & 0x80) { - if (ess_major == 0) { - ess_major = inb(DSP_READ); - } else { - ess_minor = inb(DSP_READ); - break; - } - } - } - - if (ess_major == 0) return 0; - - if (ess_major == 0x48 && (ess_minor & 0xf0) == 0x80) { - sprintf(name, "ESS ES488 AudioDrive (rev %d)", - ess_minor & 0x0f); - hw_config->name = name; - devc->model = MDL_SBPRO; - return 1; - } - - /* - * This the detection heuristic of ESS technology, though somewhat - * changed to actually make it work. - * This results in the following detection steps: - * - distinct between ES688 and ES1688+ (as always done in this driver) - * if ES688 we're ready - * - try to detect ES1868, ES1869 or ES1878 (ess_identify) - * if successful we're ready - * - try to detect ES1888, ES1887 or ES1788 (aim: detect ES1887) - * if successful we're ready - * - Dunno. Must be 1688. Will do in general - * - * This is the most BETA part of the software: Will the detection - * always work? - */ - devc->model = MDL_ESS; - devc->submodel = ess_minor & 0x0f; - - if (ess_major == 0x68 && (ess_minor & 0xf0) == 0x80) { - char *chip = NULL; - int submodel = -1; - - switch (devc->sbmo.esstype) { - case ESSTYPE_DETECT: - case ESSTYPE_LIKE20: - break; - case 688: - submodel = 0x00; - break; - case 1688: - submodel = 0x08; - break; - case 1868: - submodel = SUBMDL_ES1868; - break; - case 1869: - submodel = SUBMDL_ES1869; - break; - case 1788: - submodel = SUBMDL_ES1788; - break; - case 1878: - submodel = SUBMDL_ES1878; - break; - case 1879: - submodel = SUBMDL_ES1879; - break; - case 1887: - submodel = SUBMDL_ES1887; - break; - case 1888: - submodel = SUBMDL_ES1888; - break; - default: - printk (KERN_ERR "Invalid esstype=%d specified\n", devc->sbmo.esstype); - return 0; - } - if (submodel != -1) { - devc->submodel = submodel; - sprintf (modelname, "ES%d", devc->sbmo.esstype); - chip = modelname; - } - if (chip == NULL && (ess_minor & 0x0f) < 8) { - chip = "ES688"; - } -#ifdef FKS_TEST -FKS_test (devc); -#endif - /* - * If Nothing detected yet, and we want 2.0 behaviour... - * Then let's assume it's ES1688. - */ - if (chip == NULL && devc->sbmo.esstype == ESSTYPE_LIKE20) { - chip = "ES1688"; - } - - if (chip == NULL) { - int type; - - type = ess_identify (devc); - - switch (type) { - case 0x1868: - chip = "ES1868"; - devc->submodel = SUBMDL_ES1868; - break; - case 0x1869: - chip = "ES1869"; - devc->submodel = SUBMDL_ES1869; - break; - case 0x1878: - chip = "ES1878"; - devc->submodel = SUBMDL_ES1878; - break; - case 0x1879: - chip = "ES1879"; - devc->submodel = SUBMDL_ES1879; - break; - default: - if ((type & 0x00ff) != ((type >> 8) & 0x00ff)) { - printk ("ess_init: Unrecognized %04x\n", type); - } - } - } -#if 0 - /* - * this one failed: - * the probing of bit 4 is another thought: from ES1788 and up, all - * chips seem to have hardware volume control. Bit 4 is readonly to - * check if a hardware volume interrupt has fired. - * Cause ES688/ES1688 don't have this feature, bit 4 might be writeable - * for these chips. - */ - if (chip == NULL && !ess_probe(devc, 0x64, (1 << 4))) { -#endif - /* - * the probing of bit 2 is my idea. The ES1887 docs want me to probe - * bit 3. This results in ES1688 being detected as ES1788. - * Bit 2 is for "Enable HWV IRQE", but as ES(1)688 chips don't have - * HardWare Volume, I think they don't have this IRQE. - */ - if (chip == NULL && ess_probe(devc, 0x64, (1 << 2))) { - if (ess_probe (devc, 0x70, 0x7f)) { - if (ess_probe (devc, 0x64, (1 << 5))) { - chip = "ES1887"; - devc->submodel = SUBMDL_ES1887; - } else { - chip = "ES1888"; - devc->submodel = SUBMDL_ES1888; - } - } else { - chip = "ES1788"; - devc->submodel = SUBMDL_ES1788; - } - } - if (chip == NULL) { - chip = "ES1688"; - } - - printk(KERN_INFO "ESS chip %s %s%s\n", chip, - (devc->sbmo.esstype == ESSTYPE_DETECT || - devc->sbmo.esstype == ESSTYPE_LIKE20) ? - "detected" : "specified", - devc->sbmo.esstype == ESSTYPE_LIKE20 ? - " (kernel 2.0 compatible)" : ""); - - sprintf(name,"ESS %s AudioDrive (rev %d)", chip, ess_minor & 0x0f); - } else { - strcpy(name, "Jazz16"); - } - - /* AAS: info stolen from ALSA: these boards have different clocks */ - switch(devc->submodel) { -/* APPARENTLY NOT 1869 AND 1887 - case SUBMDL_ES1869: - case SUBMDL_ES1887: -*/ - case SUBMDL_ES1888: - devc->caps |= SB_CAP_ES18XX_RATE; - break; - } - - hw_config->name = name; - /* FKS: sb_dsp_reset to enable extended mode???? */ - sb_dsp_reset(devc); /* Turn on extended mode */ - - /* - * Enable joystick and OPL3 - */ - cfg = ess_getmixer (devc, 0x40); - ess_setmixer (devc, 0x40, cfg | 0x03); - if (devc->submodel >= 8) { /* ES1688 */ - devc->caps |= SB_NO_MIDI; /* ES1688 uses MPU401 MIDI mode */ - } - sb_dsp_reset (devc); - - /* - * This is important! If it's not done, the IRQ probe in sb_dsp_init - * may fail. - */ - return ess_set_irq_hw (devc); -} - -static int ess_set_dma_hw(sb_devc * devc) -{ - unsigned char cfg, dma_bits = 0, dma16_bits; - int dma; - -#ifdef FKS_LOGGING -printk(KERN_INFO "ess_set_dma_hw: dma8=%d,dma16=%d,dup=%d\n" -, devc->dma8, devc->dma16, devc->duplex); -#endif - - /* - * FKS: It seems as if this duplex flag isn't set yet. Check it. - */ - dma = devc->dma8; - - if (dma > 3 || dma < 0 || dma == 2) { - dma_bits = 0; - printk(KERN_ERR "ESS1688: Invalid DMA8 %d\n", dma); - return 0; - } else { - /* Extended mode DMA enable */ - cfg = 0x50; - - if (dma == 3) { - dma_bits = 3; - } else { - dma_bits = dma + 1; - } - } - - if (!ess_write (devc, 0xb2, cfg | (dma_bits << 2))) { - printk(KERN_ERR "ESS1688: Failed to write to DMA config register\n"); - return 0; - } - - if (devc->duplex) { - dma = devc->dma16; - dma16_bits = 0; - - if (dma >= 0) { - switch (dma) { - case 0: - dma_bits = 0x04; - break; - case 1: - dma_bits = 0x05; - break; - case 3: - dma_bits = 0x06; - break; - case 5: - dma_bits = 0x07; - dma16_bits = 0x20; - break; - default: - printk(KERN_ERR "ESS1887: Invalid DMA16 %d\n", dma); - return 0; - } - ess_chgmixer (devc, 0x78, 0x20, dma16_bits); - ess_chgmixer (devc, 0x7d, 0x07, dma_bits); - } - } - return 1; -} - -/* - * This one is called from sb_dsp_init. - * - * Return values: - * 0: Failed - * 1: Succeeded or doesn't apply (not SUBMDL_ES1887) - */ -int ess_dsp_init (sb_devc *devc, struct address_info *hw_config) -{ - /* - * Caller also checks this, but anyway - */ - if (devc->model != MDL_ESS) { - printk (KERN_INFO "ess_dsp_init for non ESS chip\n"); - return 1; - } - /* - * This for ES1887 to run Full Duplex. Actually ES1888 - * is allowed to do so too. I have no idea yet if this - * will work for ES1888 however. - * - * For SB16 having both dma8 and dma16 means enable - * Full Duplex. Let's try this for ES1887 too - * - */ - if (devc->submodel == SUBMDL_ES1887) { - if (hw_config->dma2 != -1) { - devc->dma16 = hw_config->dma2; - } - /* - * devc->duplex initialization is put here, cause - * ess_set_dma_hw needs it. - */ - if (devc->dma8 != devc->dma16 && devc->dma16 != -1) { - devc->duplex = 1; - } - } - if (!ess_set_dma_hw (devc)) { - free_irq(devc->irq, devc); - return 0; - } - return 1; -} - -/**************************************************************************** - * * - * ESS mixer * - * * - ****************************************************************************/ - -#define ES688_RECORDING_DEVICES \ - ( SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD ) -#define ES688_MIXER_DEVICES \ - ( SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_LINE \ - | SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_VOLUME \ - | SOUND_MASK_LINE2 | SOUND_MASK_SPEAKER ) - -#define ES1688_RECORDING_DEVICES \ - ( ES688_RECORDING_DEVICES ) -#define ES1688_MIXER_DEVICES \ - ( ES688_MIXER_DEVICES | SOUND_MASK_RECLEV ) - -#define ES1887_RECORDING_DEVICES \ - ( ES1688_RECORDING_DEVICES | SOUND_MASK_LINE2 | SOUND_MASK_SYNTH) -#define ES1887_MIXER_DEVICES \ - ( ES1688_MIXER_DEVICES ) - -/* - * Mixer registers of ES1887 - * - * These registers specifically take care of recording levels. To make the - * mapping from playback devices to recording devices every recording - * devices = playback device + ES_REC_MIXER_RECDIFF - */ -#define ES_REC_MIXER_RECBASE (SOUND_MIXER_LINE3 + 1) -#define ES_REC_MIXER_RECDIFF (ES_REC_MIXER_RECBASE - SOUND_MIXER_SYNTH) - -#define ES_REC_MIXER_RECSYNTH (SOUND_MIXER_SYNTH + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECPCM (SOUND_MIXER_PCM + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECSPEAKER (SOUND_MIXER_SPEAKER + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECLINE (SOUND_MIXER_LINE + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECMIC (SOUND_MIXER_MIC + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECCD (SOUND_MIXER_CD + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECIMIX (SOUND_MIXER_IMIX + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECALTPCM (SOUND_MIXER_ALTPCM + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECRECLEV (SOUND_MIXER_RECLEV + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECIGAIN (SOUND_MIXER_IGAIN + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECOGAIN (SOUND_MIXER_OGAIN + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECLINE1 (SOUND_MIXER_LINE1 + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECLINE2 (SOUND_MIXER_LINE2 + ES_REC_MIXER_RECDIFF) -#define ES_REC_MIXER_RECLINE3 (SOUND_MIXER_LINE3 + ES_REC_MIXER_RECDIFF) - -static mixer_tab es688_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x32, 7, 4, 0x32, 3, 4), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), -MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), -MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0) -}; - -/* - * The ES1688 specifics... hopefully correct... - * - 6 bit master volume - * I was wrong, ES1888 docs say ES1688 didn't have it. - * - RECLEV control - * These may apply to ES688 too. I have no idea. - */ -static mixer_tab es1688_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x32, 7, 4, 0x32, 3, 4), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), -MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), -MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), -MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0) -}; - -static mixer_tab es1688later_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), -MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), -MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), -MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0) -}; - -/* - * This one is for all ESS chips with a record mixer. - * It's not used (yet) however - */ -static mixer_tab es_rec_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x14, 7, 4, 0x14, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), -MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), -MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), -MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECSYNTH, 0x6b, 7, 4, 0x6b, 3, 4), -MIX_ENT(ES_REC_MIXER_RECPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECSPEAKER, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECLINE, 0x6e, 7, 4, 0x6e, 3, 4), -MIX_ENT(ES_REC_MIXER_RECMIC, 0x68, 7, 4, 0x68, 3, 4), -MIX_ENT(ES_REC_MIXER_RECCD, 0x6a, 7, 4, 0x6a, 3, 4), -MIX_ENT(ES_REC_MIXER_RECIMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECRECLEV, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECIGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECOGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECLINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECLINE2, 0x6c, 7, 4, 0x6c, 3, 4), -MIX_ENT(ES_REC_MIXER_RECLINE3, 0x00, 0, 0, 0x00, 0, 0) -}; - -/* - * This one is for ES1887. It's little different from es_rec_mix: it - * has 0x7c for PCM playback level. This is because ES1887 uses - * Audio 2 for playback. - */ -static mixer_tab es1887_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x60, 5, 6, 0x62, 5, 6), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x36, 7, 4, 0x36, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x7c, 7, 4, 0x7c, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x3c, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x3e, 7, 4, 0x3e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x1a, 7, 4, 0x1a, 3, 4), -MIX_ENT(SOUND_MIXER_CD, 0x38, 7, 4, 0x38, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0xb4, 7, 4, 0xb4, 3, 4), -MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE2, 0x3a, 7, 4, 0x3a, 3, 4), -MIX_ENT(SOUND_MIXER_LINE3, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECSYNTH, 0x6b, 7, 4, 0x6b, 3, 4), -MIX_ENT(ES_REC_MIXER_RECPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECSPEAKER, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECLINE, 0x6e, 7, 4, 0x6e, 3, 4), -MIX_ENT(ES_REC_MIXER_RECMIC, 0x68, 7, 4, 0x68, 3, 4), -MIX_ENT(ES_REC_MIXER_RECCD, 0x6a, 7, 4, 0x6a, 3, 4), -MIX_ENT(ES_REC_MIXER_RECIMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECRECLEV, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECIGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECOGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECLINE1, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(ES_REC_MIXER_RECLINE2, 0x6c, 7, 4, 0x6c, 3, 4), -MIX_ENT(ES_REC_MIXER_RECLINE3, 0x00, 0, 0, 0x00, 0, 0) -}; - -static int ess_has_rec_mixer (int submodel) -{ - switch (submodel) { - case SUBMDL_ES1887: - return 1; - default: - return 0; - } -}; - -#ifdef FKS_LOGGING -static int ess_mixer_mon_regs[] - = { 0x70, 0x71, 0x72, 0x74, 0x76, 0x78, 0x7a, 0x7c, 0x7d, 0x7f - , 0xa1, 0xa2, 0xa4, 0xa5, 0xa8, 0xa9 - , 0xb1, 0xb2, 0xb4, 0xb5, 0xb6, 0xb7, 0xb9 - , 0x00}; - -static void ess_show_mixerregs (sb_devc *devc) -{ - int *mp = ess_mixer_mon_regs; - -return; - - while (*mp != 0) { - printk (KERN_INFO "res (%x)=%x\n", *mp, (int)(ess_getmixer (devc, *mp))); - mp++; - } -} -#endif - -void ess_setmixer (sb_devc * devc, unsigned int port, unsigned int value) -{ - unsigned long flags; - -#ifdef FKS_LOGGING -printk(KERN_INFO "FKS: write mixer %x: %x\n", port, value); -#endif - - spin_lock_irqsave(&devc->lock, flags); - if (port >= 0xa0) { - ess_write (devc, port, value); - } else { - outb(((unsigned char) (port & 0xff)), MIXER_ADDR); - - udelay(20); - outb(((unsigned char) (value & 0xff)), MIXER_DATA); - udelay(20); - } - spin_unlock_irqrestore(&devc->lock, flags); -} - -unsigned int ess_getmixer (sb_devc * devc, unsigned int port) -{ - unsigned int val; - unsigned long flags; - - spin_lock_irqsave(&devc->lock, flags); - - if (port >= 0xa0) { - val = ess_read (devc, port); - } else { - outb(((unsigned char) (port & 0xff)), MIXER_ADDR); - - udelay(20); - val = inb(MIXER_DATA); - udelay(20); - } - spin_unlock_irqrestore(&devc->lock, flags); - - return val; -} - -static void ess_chgmixer - (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val) -{ - int value; - - value = ess_getmixer (devc, reg); - value = (value & ~mask) | (val & mask); - ess_setmixer (devc, reg, value); -} - -/* - * ess_mixer_init must be called from sb_mixer_init - */ -void ess_mixer_init (sb_devc * devc) -{ - devc->mixer_caps = SOUND_CAP_EXCL_INPUT; - - /* - * Take care of ES1887 specifics... - */ - switch (devc->submodel) { - case SUBMDL_ES1887: - devc->supported_devices = ES1887_MIXER_DEVICES; - devc->supported_rec_devices = ES1887_RECORDING_DEVICES; -#ifdef FKS_LOGGING -printk (KERN_INFO "FKS: ess_mixer_init dup = %d\n", devc->duplex); -#endif - if (devc->duplex) { - devc->iomap = &es1887_mix; - devc->iomap_sz = ARRAY_SIZE(es1887_mix); - } else { - devc->iomap = &es_rec_mix; - devc->iomap_sz = ARRAY_SIZE(es_rec_mix); - } - break; - default: - if (devc->submodel < 8) { - devc->supported_devices = ES688_MIXER_DEVICES; - devc->supported_rec_devices = ES688_RECORDING_DEVICES; - devc->iomap = &es688_mix; - devc->iomap_sz = ARRAY_SIZE(es688_mix); - } else { - /* - * es1688 has 4 bits master vol. - * later chips have 6 bits (?) - */ - devc->supported_devices = ES1688_MIXER_DEVICES; - devc->supported_rec_devices = ES1688_RECORDING_DEVICES; - if (devc->submodel < 0x10) { - devc->iomap = &es1688_mix; - devc->iomap_sz = ARRAY_SIZE(es688_mix); - } else { - devc->iomap = &es1688later_mix; - devc->iomap_sz = ARRAY_SIZE(es1688later_mix); - } - } - } -} - -/* - * Changing playback levels at an ESS chip with record mixer means having to - * take care of recording levels of recorded inputs (devc->recmask) too! - */ -int ess_mixer_set(sb_devc *devc, int dev, int left, int right) -{ - if (ess_has_rec_mixer (devc->submodel) && (devc->recmask & (1 << dev))) { - sb_common_mixer_set (devc, dev + ES_REC_MIXER_RECDIFF, left, right); - } - return sb_common_mixer_set (devc, dev, left, right); -} - -/* - * After a sb_dsp_reset extended register 0xb4 (RECLEV) is reset too. After - * sb_dsp_reset RECLEV has to be restored. This is where ess_mixer_reload - * helps. - */ -void ess_mixer_reload (sb_devc *devc, int dev) -{ - int left, right, value; - - value = devc->levels[dev]; - left = value & 0x000000ff; - right = (value & 0x0000ff00) >> 8; - - sb_common_mixer_set(devc, dev, left, right); -} - -static int es_rec_set_recmask(sb_devc * devc, int mask) -{ - int i, i_mask, cur_mask, diff_mask; - int value, left, right; - -#ifdef FKS_LOGGING -printk (KERN_INFO "FKS: es_rec_set_recmask mask = %x\n", mask); -#endif - /* - * Changing the recmask on an ESS chip with recording mixer means: - * (1) Find the differences - * (2) For "turned-on" inputs: make the recording level the playback level - * (3) For "turned-off" inputs: make the recording level zero - */ - cur_mask = devc->recmask; - diff_mask = (cur_mask ^ mask); - - for (i = 0; i < 32; i++) { - i_mask = (1 << i); - if (diff_mask & i_mask) { /* Difference? (1) */ - if (mask & i_mask) { /* Turn it on (2) */ - value = devc->levels[i]; - left = value & 0x000000ff; - right = (value & 0x0000ff00) >> 8; - } else { /* Turn it off (3) */ - left = 0; - right = 0; - } - sb_common_mixer_set(devc, i + ES_REC_MIXER_RECDIFF, left, right); - } - } - return mask; -} - -int ess_set_recmask(sb_devc * devc, int *mask) -{ - /* This applies to ESS chips with record mixers only! */ - - if (ess_has_rec_mixer (devc->submodel)) { - *mask = es_rec_set_recmask (devc, *mask); - return 1; /* Applied */ - } else { - return 0; /* Not applied */ - } -} - -/* - * ess_mixer_reset must be called from sb_mixer_reset - */ -int ess_mixer_reset (sb_devc * devc) -{ - /* - * Separate actions for ESS chips with a record mixer: - */ - if (ess_has_rec_mixer (devc->submodel)) { - switch (devc->submodel) { - case SUBMDL_ES1887: - /* - * Separate actions for ES1887: - * Change registers 7a and 1c to make the record mixer the - * actual recording source. - */ - ess_chgmixer(devc, 0x7a, 0x18, 0x08); - ess_chgmixer(devc, 0x1c, 0x07, 0x07); - break; - } - /* - * Call set_recmask for proper initialization - */ - devc->recmask = devc->supported_rec_devices; - es_rec_set_recmask(devc, 0); - devc->recmask = 0; - - return 1; /* We took care of recmask. */ - } else { - return 0; /* We didn't take care; caller do it */ - } -} - -/**************************************************************************** - * * - * ESS midi * - * * - ****************************************************************************/ - -/* - * FKS: IRQ may be shared. Hm. And if so? Then What? - */ -int ess_midi_init(sb_devc * devc, struct address_info *hw_config) -{ - unsigned char cfg, tmp; - - cfg = ess_getmixer (devc, 0x40) & 0x03; - - if (devc->submodel < 8) { - ess_setmixer (devc, 0x40, cfg | 0x03); /* Enable OPL3 & joystick */ - return 0; /* ES688 doesn't support MPU401 mode */ - } - tmp = (hw_config->io_base & 0x0f0) >> 4; - - if (tmp > 3) { - ess_setmixer (devc, 0x40, cfg); - return 0; - } - cfg |= tmp << 3; - - tmp = 1; /* MPU enabled without interrupts */ - - /* May be shared: if so the value is -ve */ - - switch (abs(hw_config->irq)) { - case 9: - tmp = 0x4; - break; - case 5: - tmp = 0x5; - break; - case 7: - tmp = 0x6; - break; - case 10: - tmp = 0x7; - break; - default: - return 0; - } - - cfg |= tmp << 5; - ess_setmixer (devc, 0x40, cfg | 0x03); - - return 1; -} - diff --git a/sound/oss/sb_ess.h b/sound/oss/sb_ess.h deleted file mode 100644 index 38aa072e01f2..000000000000 --- a/sound/oss/sb_ess.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Created: 9-Jan-1999 Rolf Fokkens - */ - -extern void ess_intr - (sb_devc *devc); -extern int ess_dsp_init - (sb_devc *devc, struct address_info *hw_config); - -extern struct audio_driver *ess_audio_init - (sb_devc *devc, int *audio_flags, int *format_mask); -extern int ess_midi_init - (sb_devc *devc, struct address_info *hw_config); -extern void ess_mixer_init - (sb_devc *devc); - -extern int ess_init - (sb_devc *devc, struct address_info *hw_config); -extern int ess_dsp_reset - (sb_devc *devc); - -extern void ess_setmixer - (sb_devc *devc, unsigned int port, unsigned int value); -extern unsigned int ess_getmixer - (sb_devc *devc, unsigned int port); -extern int ess_mixer_set - (sb_devc *devc, int dev, int left, int right); -extern int ess_mixer_reset - (sb_devc *devc); -extern void ess_mixer_reload - (sb_devc * devc, int dev); -extern int ess_set_recmask - (sb_devc *devc, int *mask); - diff --git a/sound/oss/sb_midi.c b/sound/oss/sb_midi.c deleted file mode 100644 index 551ee7557b4e..000000000000 --- a/sound/oss/sb_midi.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * sound/oss/sb_midi.c - * - * The low level driver for the Sound Blaster DS chips. - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - -#include <linux/spinlock.h> -#include <linux/slab.h> - -#include "sound_config.h" - -#include "sb.h" -#undef SB_TEST_IRQ - -/* - * The DSP channel can be used either for input or output. Variable - * 'sb_irq_mode' will be set when the program calls read or write first time - * after open. Current version doesn't support mode changes without closing - * and reopening the device. Support for this feature may be implemented in a - * future version of this driver. - */ - - -static int sb_midi_open(int dev, int mode, - void (*input) (int dev, unsigned char data), - void (*output) (int dev) -) -{ - sb_devc *devc = midi_devs[dev]->devc; - unsigned long flags; - - if (devc == NULL) - return -ENXIO; - - spin_lock_irqsave(&devc->lock, flags); - if (devc->opened) - { - spin_unlock_irqrestore(&devc->lock, flags); - return -EBUSY; - } - devc->opened = 1; - spin_unlock_irqrestore(&devc->lock, flags); - - devc->irq_mode = IMODE_MIDI; - devc->midi_broken = 0; - - sb_dsp_reset(devc); - - if (!sb_dsp_command(devc, 0x35)) /* Start MIDI UART mode */ - { - devc->opened = 0; - return -EIO; - } - devc->intr_active = 1; - - if (mode & OPEN_READ) - { - devc->input_opened = 1; - devc->midi_input_intr = input; - } - return 0; -} - -static void sb_midi_close(int dev) -{ - sb_devc *devc = midi_devs[dev]->devc; - unsigned long flags; - - if (devc == NULL) - return; - - spin_lock_irqsave(&devc->lock, flags); - sb_dsp_reset(devc); - devc->intr_active = 0; - devc->input_opened = 0; - devc->opened = 0; - spin_unlock_irqrestore(&devc->lock, flags); -} - -static int sb_midi_out(int dev, unsigned char midi_byte) -{ - sb_devc *devc = midi_devs[dev]->devc; - - if (devc == NULL) - return 1; - - if (devc->midi_broken) - return 1; - - if (!sb_dsp_command(devc, midi_byte)) - { - devc->midi_broken = 1; - return 1; - } - return 1; -} - -static int sb_midi_start_read(int dev) -{ - return 0; -} - -static int sb_midi_end_read(int dev) -{ - sb_devc *devc = midi_devs[dev]->devc; - - if (devc == NULL) - return -ENXIO; - - sb_dsp_reset(devc); - devc->intr_active = 0; - return 0; -} - -static int sb_midi_ioctl(int dev, unsigned cmd, void __user *arg) -{ - return -EINVAL; -} - -void sb_midi_interrupt(sb_devc * devc) -{ - unsigned long flags; - unsigned char data; - - if (devc == NULL) - return; - - spin_lock_irqsave(&devc->lock, flags); - - data = inb(DSP_READ); - if (devc->input_opened) - devc->midi_input_intr(devc->my_mididev, data); - - spin_unlock_irqrestore(&devc->lock, flags); -} - -#define MIDI_SYNTH_NAME "Sound Blaster Midi" -#define MIDI_SYNTH_CAPS 0 -#include "midi_synth.h" - -static struct midi_operations sb_midi_operations = -{ - .owner = THIS_MODULE, - .info = {"Sound Blaster", 0, 0, SNDCARD_SB}, - .converter = &std_midi_synth, - .in_info = {0}, - .open = sb_midi_open, - .close = sb_midi_close, - .ioctl = sb_midi_ioctl, - .outputc = sb_midi_out, - .start_read = sb_midi_start_read, - .end_read = sb_midi_end_read, -}; - -void sb_dsp_midi_init(sb_devc * devc, struct module *owner) -{ - int dev; - - if (devc->model < 2) /* No MIDI support for SB 1.x */ - return; - - dev = sound_alloc_mididev(); - - if (dev == -1) - { - printk(KERN_ERR "sb_midi: too many MIDI devices detected\n"); - return; - } - std_midi_synth.midi_dev = devc->my_mididev = dev; - midi_devs[dev] = kmalloc(sizeof(struct midi_operations), GFP_KERNEL); - if (midi_devs[dev] == NULL) - { - printk(KERN_WARNING "Sound Blaster: failed to allocate MIDI memory.\n"); - sound_unload_mididev(dev); - return; - } - memcpy((char *) midi_devs[dev], (char *) &sb_midi_operations, - sizeof(struct midi_operations)); - - if (owner) - midi_devs[dev]->owner = owner; - - midi_devs[dev]->devc = devc; - - - midi_devs[dev]->converter = kmalloc(sizeof(struct synth_operations), GFP_KERNEL); - if (midi_devs[dev]->converter == NULL) - { - printk(KERN_WARNING "Sound Blaster: failed to allocate MIDI memory.\n"); - kfree(midi_devs[dev]); - sound_unload_mididev(dev); - return; - } - memcpy((char *) midi_devs[dev]->converter, (char *) &std_midi_synth, - sizeof(struct synth_operations)); - - midi_devs[dev]->converter->id = "SBMIDI"; - sequencer_init(); -} diff --git a/sound/oss/sb_mixer.c b/sound/oss/sb_mixer.c deleted file mode 100644 index acf7586aeb47..000000000000 --- a/sound/oss/sb_mixer.c +++ /dev/null @@ -1,770 +0,0 @@ -/* - * sound/oss/sb_mixer.c - * - * The low level mixer driver for the Sound Blaster compatible cards. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Rolf Fokkens (Dec 20 1998) : Moved ESS stuff into sb_ess.[ch] - * Stanislav Voronyi <stas@esc.kharkov.com> : Support for AWE 3DSE device (Jun 7 1999) - */ - -#include <linux/slab.h> - -#include "sound_config.h" - -#define __SB_MIXER_C__ - -#include "sb.h" -#include "sb_mixer.h" - -#include "sb_ess.h" - -#define SBPRO_RECORDING_DEVICES (SOUND_MASK_LINE | SOUND_MASK_MIC | SOUND_MASK_CD) - -/* Same as SB Pro, unless I find otherwise */ -#define SGNXPRO_RECORDING_DEVICES SBPRO_RECORDING_DEVICES - -#define SBPRO_MIXER_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD | SOUND_MASK_VOLUME) - -/* SG NX Pro has treble and bass settings on the mixer. The 'speaker' - * channel is the COVOX/DisneySoundSource emulation volume control - * on the mixer. It does NOT control speaker volume. Should have own - * mask eventually? - */ -#define SGNXPRO_MIXER_DEVICES (SBPRO_MIXER_DEVICES|SOUND_MASK_BASS| \ - SOUND_MASK_TREBLE|SOUND_MASK_SPEAKER ) - -#define SB16_RECORDING_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD) - -#define SB16_OUTFILTER_DEVICES (SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD) - -#define SB16_MIXER_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \ - SOUND_MASK_CD | \ - SOUND_MASK_IGAIN | SOUND_MASK_OGAIN | \ - SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | \ - SOUND_MASK_IMIX) - -/* These are the only devices that are working at the moment. Others could - * be added once they are identified and a method is found to control them. - */ -#define ALS007_MIXER_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_LINE | \ - SOUND_MASK_PCM | SOUND_MASK_MIC | \ - SOUND_MASK_CD | \ - SOUND_MASK_VOLUME) - -static mixer_tab sbpro_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x22, 7, 4, 0x22, 3, 4), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x26, 7, 4, 0x26, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x04, 7, 4, 0x04, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x2e, 7, 4, 0x2e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x0a, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_CD, 0x28, 7, 4, 0x28, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0x00, 0, 0, 0x00, 0, 0) -}; - -static mixer_tab sb16_mix = { -MIX_ENT(SOUND_MIXER_VOLUME, 0x30, 7, 5, 0x31, 7, 5), -MIX_ENT(SOUND_MIXER_BASS, 0x46, 7, 4, 0x47, 7, 4), -MIX_ENT(SOUND_MIXER_TREBLE, 0x44, 7, 4, 0x45, 7, 4), -MIX_ENT(SOUND_MIXER_SYNTH, 0x34, 7, 5, 0x35, 7, 5), -MIX_ENT(SOUND_MIXER_PCM, 0x32, 7, 5, 0x33, 7, 5), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x3b, 7, 2, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x38, 7, 5, 0x39, 7, 5), -MIX_ENT(SOUND_MIXER_MIC, 0x3a, 7, 5, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_CD, 0x36, 7, 5, 0x37, 7, 5), -MIX_ENT(SOUND_MIXER_IMIX, 0x3c, 0, 1, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0x3f, 7, 2, 0x40, 7, 2), /* Obsolete. Use IGAIN */ -MIX_ENT(SOUND_MIXER_IGAIN, 0x3f, 7, 2, 0x40, 7, 2), -MIX_ENT(SOUND_MIXER_OGAIN, 0x41, 7, 2, 0x42, 7, 2) -}; - -static mixer_tab als007_mix = -{ -MIX_ENT(SOUND_MIXER_VOLUME, 0x62, 7, 4, 0x62, 3, 4), -MIX_ENT(SOUND_MIXER_BASS, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_TREBLE, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_SYNTH, 0x66, 7, 4, 0x66, 3, 4), -MIX_ENT(SOUND_MIXER_PCM, 0x64, 7, 4, 0x64, 3, 4), -MIX_ENT(SOUND_MIXER_SPEAKER, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_LINE, 0x6e, 7, 4, 0x6e, 3, 4), -MIX_ENT(SOUND_MIXER_MIC, 0x6a, 2, 3, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_CD, 0x68, 7, 4, 0x68, 3, 4), -MIX_ENT(SOUND_MIXER_IMIX, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_ALTPCM, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_RECLEV, 0x00, 0, 0, 0x00, 0, 0), /* Obsolete. Use IGAIN */ -MIX_ENT(SOUND_MIXER_IGAIN, 0x00, 0, 0, 0x00, 0, 0), -MIX_ENT(SOUND_MIXER_OGAIN, 0x00, 0, 0, 0x00, 0, 0) -}; - - -/* SM_GAMES Master volume is lower and PCM & FM volumes - higher than with SB Pro. This improves the - sound quality */ - -static int smg_default_levels[32] = -{ - 0x2020, /* Master Volume */ - 0x4b4b, /* Bass */ - 0x4b4b, /* Treble */ - 0x6464, /* FM */ - 0x6464, /* PCM */ - 0x4b4b, /* PC Speaker */ - 0x4b4b, /* Ext Line */ - 0x0000, /* Mic */ - 0x4b4b, /* CD */ - 0x4b4b, /* Recording monitor */ - 0x4b4b, /* SB PCM */ - 0x4b4b, /* Recording level */ - 0x4b4b, /* Input gain */ - 0x4b4b, /* Output gain */ - 0x4040, /* Line1 */ - 0x4040, /* Line2 */ - 0x1515 /* Line3 */ -}; - -static int sb_default_levels[32] = -{ - 0x5a5a, /* Master Volume */ - 0x4b4b, /* Bass */ - 0x4b4b, /* Treble */ - 0x4b4b, /* FM */ - 0x4b4b, /* PCM */ - 0x4b4b, /* PC Speaker */ - 0x4b4b, /* Ext Line */ - 0x1010, /* Mic */ - 0x4b4b, /* CD */ - 0x0000, /* Recording monitor */ - 0x4b4b, /* SB PCM */ - 0x4b4b, /* Recording level */ - 0x4b4b, /* Input gain */ - 0x4b4b, /* Output gain */ - 0x4040, /* Line1 */ - 0x4040, /* Line2 */ - 0x1515 /* Line3 */ -}; - -static unsigned char sb16_recmasks_L[SOUND_MIXER_NRDEVICES] = -{ - 0x00, /* SOUND_MIXER_VOLUME */ - 0x00, /* SOUND_MIXER_BASS */ - 0x00, /* SOUND_MIXER_TREBLE */ - 0x40, /* SOUND_MIXER_SYNTH */ - 0x00, /* SOUND_MIXER_PCM */ - 0x00, /* SOUND_MIXER_SPEAKER */ - 0x10, /* SOUND_MIXER_LINE */ - 0x01, /* SOUND_MIXER_MIC */ - 0x04, /* SOUND_MIXER_CD */ - 0x00, /* SOUND_MIXER_IMIX */ - 0x00, /* SOUND_MIXER_ALTPCM */ - 0x00, /* SOUND_MIXER_RECLEV */ - 0x00, /* SOUND_MIXER_IGAIN */ - 0x00 /* SOUND_MIXER_OGAIN */ -}; - -static unsigned char sb16_recmasks_R[SOUND_MIXER_NRDEVICES] = -{ - 0x00, /* SOUND_MIXER_VOLUME */ - 0x00, /* SOUND_MIXER_BASS */ - 0x00, /* SOUND_MIXER_TREBLE */ - 0x20, /* SOUND_MIXER_SYNTH */ - 0x00, /* SOUND_MIXER_PCM */ - 0x00, /* SOUND_MIXER_SPEAKER */ - 0x08, /* SOUND_MIXER_LINE */ - 0x01, /* SOUND_MIXER_MIC */ - 0x02, /* SOUND_MIXER_CD */ - 0x00, /* SOUND_MIXER_IMIX */ - 0x00, /* SOUND_MIXER_ALTPCM */ - 0x00, /* SOUND_MIXER_RECLEV */ - 0x00, /* SOUND_MIXER_IGAIN */ - 0x00 /* SOUND_MIXER_OGAIN */ -}; - -static char smw_mix_regs[] = /* Left mixer registers */ -{ - 0x0b, /* SOUND_MIXER_VOLUME */ - 0x0d, /* SOUND_MIXER_BASS */ - 0x0d, /* SOUND_MIXER_TREBLE */ - 0x05, /* SOUND_MIXER_SYNTH */ - 0x09, /* SOUND_MIXER_PCM */ - 0x00, /* SOUND_MIXER_SPEAKER */ - 0x03, /* SOUND_MIXER_LINE */ - 0x01, /* SOUND_MIXER_MIC */ - 0x07, /* SOUND_MIXER_CD */ - 0x00, /* SOUND_MIXER_IMIX */ - 0x00, /* SOUND_MIXER_ALTPCM */ - 0x00, /* SOUND_MIXER_RECLEV */ - 0x00, /* SOUND_MIXER_IGAIN */ - 0x00, /* SOUND_MIXER_OGAIN */ - 0x00, /* SOUND_MIXER_LINE1 */ - 0x00, /* SOUND_MIXER_LINE2 */ - 0x00 /* SOUND_MIXER_LINE3 */ -}; - -static int sbmixnum = 1; - -static void sb_mixer_reset(sb_devc * devc); - -void sb_mixer_set_stereo(sb_devc * devc, int mode) -{ - sb_chgmixer(devc, OUT_FILTER, STEREO_DAC, (mode ? STEREO_DAC : MONO_DAC)); -} - -static int detect_mixer(sb_devc * devc) -{ - /* Just trust the mixer is there */ - return 1; -} - -static void oss_change_bits(sb_devc *devc, unsigned char *regval, int dev, int chn, int newval) -{ - unsigned char mask; - int shift; - - mask = (1 << (*devc->iomap)[dev][chn].nbits) - 1; - newval = (int) ((newval * mask) + 50) / 100; /* Scale */ - - shift = (*devc->iomap)[dev][chn].bitoffs - (*devc->iomap)[dev][LEFT_CHN].nbits + 1; - - *regval &= ~(mask << shift); /* Mask out previous value */ - *regval |= (newval & mask) << shift; /* Set the new value */ -} - -static int sb_mixer_get(sb_devc * devc, int dev) -{ - if (!((1 << dev) & devc->supported_devices)) - return -EINVAL; - return devc->levels[dev]; -} - -void smw_mixer_init(sb_devc * devc) -{ - int i; - - sb_setmixer(devc, 0x00, 0x18); /* Mute unused (Telephone) line */ - sb_setmixer(devc, 0x10, 0x38); /* Config register 2 */ - - devc->supported_devices = 0; - for (i = 0; i < sizeof(smw_mix_regs); i++) - if (smw_mix_regs[i] != 0) - devc->supported_devices |= (1 << i); - - devc->supported_rec_devices = devc->supported_devices & - ~(SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_PCM | SOUND_MASK_VOLUME); - sb_mixer_reset(devc); -} - -int sb_common_mixer_set(sb_devc * devc, int dev, int left, int right) -{ - int regoffs; - unsigned char val; - - if ((dev < 0) || (dev >= devc->iomap_sz)) - return -EINVAL; - - regoffs = (*devc->iomap)[dev][LEFT_CHN].regno; - - if (regoffs == 0) - return -EINVAL; - - val = sb_getmixer(devc, regoffs); - oss_change_bits(devc, &val, dev, LEFT_CHN, left); - - if ((*devc->iomap)[dev][RIGHT_CHN].regno != regoffs) /* - * Change register - */ - { - sb_setmixer(devc, regoffs, val); /* - * Save the old one - */ - regoffs = (*devc->iomap)[dev][RIGHT_CHN].regno; - - if (regoffs == 0) - return left | (left << 8); /* - * Just left channel present - */ - - val = sb_getmixer(devc, regoffs); /* - * Read the new one - */ - } - oss_change_bits(devc, &val, dev, RIGHT_CHN, right); - - sb_setmixer(devc, regoffs, val); - - return left | (right << 8); -} - -static int smw_mixer_set(sb_devc * devc, int dev, int left, int right) -{ - int reg, val; - - switch (dev) - { - case SOUND_MIXER_VOLUME: - sb_setmixer(devc, 0x0b, 96 - (96 * left / 100)); /* 96=mute, 0=max */ - sb_setmixer(devc, 0x0c, 96 - (96 * right / 100)); - break; - - case SOUND_MIXER_BASS: - case SOUND_MIXER_TREBLE: - devc->levels[dev] = left | (right << 8); - /* Set left bass and treble values */ - val = ((devc->levels[SOUND_MIXER_TREBLE] & 0xff) * 16 / (unsigned) 100) << 4; - val |= ((devc->levels[SOUND_MIXER_BASS] & 0xff) * 16 / (unsigned) 100) & 0x0f; - sb_setmixer(devc, 0x0d, val); - - /* Set right bass and treble values */ - val = (((devc->levels[SOUND_MIXER_TREBLE] >> 8) & 0xff) * 16 / (unsigned) 100) << 4; - val |= (((devc->levels[SOUND_MIXER_BASS] >> 8) & 0xff) * 16 / (unsigned) 100) & 0x0f; - sb_setmixer(devc, 0x0e, val); - - break; - - default: - /* bounds check */ - if (dev < 0 || dev >= ARRAY_SIZE(smw_mix_regs)) - return -EINVAL; - reg = smw_mix_regs[dev]; - if (reg == 0) - return -EINVAL; - sb_setmixer(devc, reg, (24 - (24 * left / 100)) | 0x20); /* 24=mute, 0=max */ - sb_setmixer(devc, reg + 1, (24 - (24 * right / 100)) | 0x40); - } - - devc->levels[dev] = left | (right << 8); - return left | (right << 8); -} - -static int sb_mixer_set(sb_devc * devc, int dev, int value) -{ - int left = value & 0x000000ff; - int right = (value & 0x0000ff00) >> 8; - int retval; - - if (left > 100) - left = 100; - if (right > 100) - right = 100; - - if ((dev < 0) || (dev > 31)) - return -EINVAL; - - if (!(devc->supported_devices & (1 << dev))) /* - * Not supported - */ - return -EINVAL; - - /* Differentiate depending on the chipsets */ - switch (devc->model) { - case MDL_SMW: - retval = smw_mixer_set(devc, dev, left, right); - break; - case MDL_ESS: - retval = ess_mixer_set(devc, dev, left, right); - break; - default: - retval = sb_common_mixer_set(devc, dev, left, right); - } - if (retval >= 0) devc->levels[dev] = retval; - - return retval; -} - -/* - * set_recsrc doesn't apply to ES188x - */ -static void set_recsrc(sb_devc * devc, int src) -{ - sb_setmixer(devc, RECORD_SRC, (sb_getmixer(devc, RECORD_SRC) & ~7) | (src & 0x7)); -} - -static int set_recmask(sb_devc * devc, int mask) -{ - int devmask, i; - unsigned char regimageL, regimageR; - - devmask = mask & devc->supported_rec_devices; - - switch (devc->model) - { - case MDL_SBPRO: - case MDL_ESS: - case MDL_JAZZ: - case MDL_SMW: - if (devc->model == MDL_ESS && ess_set_recmask (devc, &devmask)) { - break; - } - if (devmask != SOUND_MASK_MIC && - devmask != SOUND_MASK_LINE && - devmask != SOUND_MASK_CD) - { - /* - * More than one device selected. Drop the - * previous selection - */ - devmask &= ~devc->recmask; - } - if (devmask != SOUND_MASK_MIC && - devmask != SOUND_MASK_LINE && - devmask != SOUND_MASK_CD) - { - /* - * More than one device selected. Default to - * mic - */ - devmask = SOUND_MASK_MIC; - } - if (devmask ^ devc->recmask) /* - * Input source changed - */ - { - switch (devmask) - { - case SOUND_MASK_MIC: - set_recsrc(devc, SRC__MIC); - break; - - case SOUND_MASK_LINE: - set_recsrc(devc, SRC__LINE); - break; - - case SOUND_MASK_CD: - set_recsrc(devc, SRC__CD); - break; - - default: - set_recsrc(devc, SRC__MIC); - } - } - break; - - case MDL_SB16: - if (!devmask) - devmask = SOUND_MASK_MIC; - - if (devc->submodel == SUBMDL_ALS007) - { - switch (devmask) - { - case SOUND_MASK_LINE: - sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_LINE); - break; - case SOUND_MASK_CD: - sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_CD); - break; - case SOUND_MASK_SYNTH: - sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_SYNTH); - break; - default: /* Also takes care of SOUND_MASK_MIC case */ - sb_setmixer(devc, ALS007_RECORD_SRC, ALS007_MIC); - break; - } - } - else - { - regimageL = regimageR = 0; - for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) - { - if ((1 << i) & devmask) - { - regimageL |= sb16_recmasks_L[i]; - regimageR |= sb16_recmasks_R[i]; - } - sb_setmixer (devc, SB16_IMASK_L, regimageL); - sb_setmixer (devc, SB16_IMASK_R, regimageR); - } - } - break; - } - devc->recmask = devmask; - return devc->recmask; -} - -static int set_outmask(sb_devc * devc, int mask) -{ - int devmask, i; - unsigned char regimage; - - devmask = mask & devc->supported_out_devices; - - switch (devc->model) - { - case MDL_SB16: - if (devc->submodel == SUBMDL_ALS007) - break; - else - { - regimage = 0; - for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) - { - if ((1 << i) & devmask) - { - regimage |= (sb16_recmasks_L[i] | sb16_recmasks_R[i]); - } - sb_setmixer (devc, SB16_OMASK, regimage); - } - } - break; - default: - break; - } - - devc->outmask = devmask; - return devc->outmask; -} - -static int sb_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - sb_devc *devc = mixer_devs[dev]->devc; - int val, ret; - int __user *p = arg; - - /* - * Use ioctl(fd, SOUND_MIXER_AGC, &mode) to turn AGC off (0) or on (1). - * Use ioctl(fd, SOUND_MIXER_3DSE, &mode) to turn 3DSE off (0) or on (1) - * or mode==2 put 3DSE state to mode. - */ - if (devc->model == MDL_SB16) { - if (cmd == SOUND_MIXER_AGC) - { - if (get_user(val, p)) - return -EFAULT; - sb_setmixer(devc, 0x43, (~val) & 0x01); - return 0; - } - if (cmd == SOUND_MIXER_3DSE) - { - /* I put here 15, but I don't know the exact version. - At least my 4.13 havn't 3DSE, 4.16 has it. */ - if (devc->minor < 15) - return -EINVAL; - if (get_user(val, p)) - return -EFAULT; - if (val == 0 || val == 1) - sb_chgmixer(devc, AWE_3DSE, 0x01, val); - else if (val == 2) - { - ret = sb_getmixer(devc, AWE_3DSE)&0x01; - return put_user(ret, p); - } - else - return -EINVAL; - return 0; - } - } - if (((cmd >> 8) & 0xff) == 'M') - { - if (_SIOC_DIR(cmd) & _SIOC_WRITE) - { - if (get_user(val, p)) - return -EFAULT; - switch (cmd & 0xff) - { - case SOUND_MIXER_RECSRC: - ret = set_recmask(devc, val); - break; - - case SOUND_MIXER_OUTSRC: - ret = set_outmask(devc, val); - break; - - default: - ret = sb_mixer_set(devc, cmd & 0xff, val); - } - } - else switch (cmd & 0xff) - { - case SOUND_MIXER_RECSRC: - ret = devc->recmask; - break; - - case SOUND_MIXER_OUTSRC: - ret = devc->outmask; - break; - - case SOUND_MIXER_DEVMASK: - ret = devc->supported_devices; - break; - - case SOUND_MIXER_STEREODEVS: - ret = devc->supported_devices; - /* The ESS seems to have stereo mic controls */ - if (devc->model == MDL_ESS) - ret &= ~(SOUND_MASK_SPEAKER|SOUND_MASK_IMIX); - else if (devc->model != MDL_JAZZ && devc->model != MDL_SMW) - ret &= ~(SOUND_MASK_MIC | SOUND_MASK_SPEAKER | SOUND_MASK_IMIX); - break; - - case SOUND_MIXER_RECMASK: - ret = devc->supported_rec_devices; - break; - - case SOUND_MIXER_OUTMASK: - ret = devc->supported_out_devices; - break; - - case SOUND_MIXER_CAPS: - ret = devc->mixer_caps; - break; - - default: - ret = sb_mixer_get(devc, cmd & 0xff); - break; - } - return put_user(ret, p); - } else - return -EINVAL; -} - -static struct mixer_operations sb_mixer_operations = -{ - .owner = THIS_MODULE, - .id = "SB", - .name = "Sound Blaster", - .ioctl = sb_mixer_ioctl -}; - -static struct mixer_operations als007_mixer_operations = -{ - .owner = THIS_MODULE, - .id = "ALS007", - .name = "Avance ALS-007", - .ioctl = sb_mixer_ioctl -}; - -static void sb_mixer_reset(sb_devc * devc) -{ - char name[32]; - int i; - - sprintf(name, "SB_%d", devc->sbmixnum); - - if (devc->sbmo.sm_games) - devc->levels = load_mixer_volumes(name, smg_default_levels, 1); - else - devc->levels = load_mixer_volumes(name, sb_default_levels, 1); - - for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) - sb_mixer_set(devc, i, devc->levels[i]); - - if (devc->model != MDL_ESS || !ess_mixer_reset (devc)) { - set_recmask(devc, SOUND_MASK_MIC); - } -} - -int sb_mixer_init(sb_devc * devc, struct module *owner) -{ - int mixer_type = 0; - int m; - - devc->sbmixnum = sbmixnum++; - devc->levels = NULL; - - sb_setmixer(devc, 0x00, 0); /* Reset mixer */ - - if (!(mixer_type = detect_mixer(devc))) - return 0; /* No mixer. Why? */ - - switch (devc->model) - { - case MDL_ESSPCI: - case MDL_YMPCI: - case MDL_SBPRO: - case MDL_AZTECH: - case MDL_JAZZ: - devc->mixer_caps = SOUND_CAP_EXCL_INPUT; - devc->supported_devices = SBPRO_MIXER_DEVICES; - devc->supported_rec_devices = SBPRO_RECORDING_DEVICES; - devc->iomap = &sbpro_mix; - devc->iomap_sz = ARRAY_SIZE(sbpro_mix); - break; - - case MDL_ESS: - ess_mixer_init (devc); - break; - - case MDL_SMW: - devc->mixer_caps = SOUND_CAP_EXCL_INPUT; - devc->supported_devices = 0; - devc->supported_rec_devices = 0; - devc->iomap = &sbpro_mix; - devc->iomap_sz = ARRAY_SIZE(sbpro_mix); - smw_mixer_init(devc); - break; - - case MDL_SB16: - devc->mixer_caps = 0; - devc->supported_rec_devices = SB16_RECORDING_DEVICES; - devc->supported_out_devices = SB16_OUTFILTER_DEVICES; - if (devc->submodel != SUBMDL_ALS007) - { - devc->supported_devices = SB16_MIXER_DEVICES; - devc->iomap = &sb16_mix; - devc->iomap_sz = ARRAY_SIZE(sb16_mix); - } - else - { - devc->supported_devices = ALS007_MIXER_DEVICES; - devc->iomap = &als007_mix; - devc->iomap_sz = ARRAY_SIZE(als007_mix); - } - break; - - default: - printk(KERN_WARNING "sb_mixer: Unsupported mixer type %d\n", devc->model); - return 0; - } - - m = sound_alloc_mixerdev(); - if (m == -1) - return 0; - - mixer_devs[m] = kmalloc(sizeof(struct mixer_operations), GFP_KERNEL); - if (mixer_devs[m] == NULL) - { - printk(KERN_ERR "sb_mixer: Can't allocate memory\n"); - sound_unload_mixerdev(m); - return 0; - } - - if (devc->submodel != SUBMDL_ALS007) - memcpy ((char *) mixer_devs[m], (char *) &sb_mixer_operations, sizeof (struct mixer_operations)); - else - memcpy ((char *) mixer_devs[m], (char *) &als007_mixer_operations, sizeof (struct mixer_operations)); - - mixer_devs[m]->devc = devc; - - if (owner) - mixer_devs[m]->owner = owner; - - devc->my_mixerdev = m; - sb_mixer_reset(devc); - return 1; -} - -void sb_mixer_unload(sb_devc *devc) -{ - if (devc->my_mixerdev == -1) - return; - - kfree(mixer_devs[devc->my_mixerdev]); - sound_unload_mixerdev(devc->my_mixerdev); - sbmixnum--; -} diff --git a/sound/oss/sb_mixer.h b/sound/oss/sb_mixer.h deleted file mode 100644 index 4b9425f085e3..000000000000 --- a/sound/oss/sb_mixer.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * sound/oss/sb_mixer.h - * - * Definitions for the SB Pro and SB16 mixers - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - -/* - * Modified: - * Hunyue Yau Jan 6 1994 - * Added defines for the Sound Galaxy NX Pro mixer. - * - * Rolf Fokkens Dec 20 1998 - * Added defines for some ES188x chips. - * - * Rolf Fokkens Dec 27 1998 - * Moved static stuff to sb_mixer.c - * - */ -/* - * Mixer registers - * - * NOTE! RECORD_SRC == IN_FILTER - */ - -/* - * Mixer registers of SB Pro - */ -#define VOC_VOL 0x04 -#define MIC_VOL 0x0A -#define MIC_MIX 0x0A -#define RECORD_SRC 0x0C -#define IN_FILTER 0x0C -#define OUT_FILTER 0x0E -#define MASTER_VOL 0x22 -#define FM_VOL 0x26 -#define CD_VOL 0x28 -#define LINE_VOL 0x2E -#define IRQ_NR 0x80 -#define DMA_NR 0x81 -#define IRQ_STAT 0x82 -#define OPSW 0x3c - -/* - * Additional registers on the SG NX Pro - */ -#define COVOX_VOL 0x42 -#define TREBLE_LVL 0x44 -#define BASS_LVL 0x46 - -#define FREQ_HI (1 << 3)/* Use High-frequency ANFI filters */ -#define FREQ_LOW 0 /* Use Low-frequency ANFI filters */ -#define FILT_ON 0 /* Yes, 0 to turn it on, 1 for off */ -#define FILT_OFF (1 << 5) - -#define MONO_DAC 0x00 -#define STEREO_DAC 0x02 - -/* - * Mixer registers of SB16 - */ -#define SB16_OMASK 0x3c -#define SB16_IMASK_L 0x3d -#define SB16_IMASK_R 0x3e - -#define LEFT_CHN 0 -#define RIGHT_CHN 1 - -/* - * 3DSE register of AWE32/64 - */ -#define AWE_3DSE 0x90 - -/* - * Mixer registers of ALS007 - */ -#define ALS007_RECORD_SRC 0x6c -#define ALS007_OUTPUT_CTRL1 0x3c -#define ALS007_OUTPUT_CTRL2 0x4c - -#define MIX_ENT(name, reg_l, bit_l, len_l, reg_r, bit_r, len_r) \ - {{reg_l, bit_l, len_l}, {reg_r, bit_r, len_r}} - -/* - * Recording sources (SB Pro) - */ - -#define SRC__MIC 1 /* Select Microphone recording source */ -#define SRC__CD 3 /* Select CD recording source */ -#define SRC__LINE 7 /* Use Line-in for recording source */ - -/* - * Recording sources for ALS-007 - */ - -#define ALS007_MIC 4 -#define ALS007_LINE 6 -#define ALS007_CD 2 -#define ALS007_SYNTH 7 diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c deleted file mode 100644 index f19da4b47c1d..000000000000 --- a/sound/oss/sequencer.c +++ /dev/null @@ -1,1661 +0,0 @@ -/* - * sound/oss/sequencer.c - * - * The sequencer personality manager. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Alan Cox : reformatted and fixed a pair of null pointer bugs - */ -#include <linux/kmod.h> -#include <linux/spinlock.h> -#include "sound_config.h" - -#include "midi_ctrl.h" -#include "sleep.h" - -static int sequencer_ok; -static struct sound_timer_operations *tmr; -static int tmr_no = -1; /* Currently selected timer */ -static int pending_timer = -1; /* For timer change operation */ -extern unsigned long seq_time; - -static int obsolete_api_used; -static DEFINE_SPINLOCK(lock); - -/* - * Local counts for number of synth and MIDI devices. These are initialized - * by the sequencer_open. - */ -static int max_mididev; -static int max_synthdev; - -/* - * The seq_mode gives the operating mode of the sequencer: - * 1 = level1 (the default) - * 2 = level2 (extended capabilities) - */ - -#define SEQ_1 1 -#define SEQ_2 2 -static int seq_mode = SEQ_1; - -static DECLARE_WAIT_QUEUE_HEAD(seq_sleeper); -static DECLARE_WAIT_QUEUE_HEAD(midi_sleeper); - -static int midi_opened[MAX_MIDI_DEV]; - -static int midi_written[MAX_MIDI_DEV]; - -static unsigned long prev_input_time; -static int prev_event_time; - -#include "tuning.h" - -#define EV_SZ 8 -#define IEV_SZ 8 - -static unsigned char *queue; -static unsigned char *iqueue; - -static volatile int qhead, qtail, qlen; -static volatile int iqhead, iqtail, iqlen; -static volatile int seq_playing; -static volatile int sequencer_busy; -static int output_threshold; -static long pre_event_timeout; -static unsigned synth_open_mask; - -static int seq_queue(unsigned char *note, char nonblock); -static void seq_startplay(void); -static int seq_sync(void); -static void seq_reset(void); - -#if MAX_SYNTH_DEV > 15 -#error Too many synthesizer devices enabled. -#endif - -int sequencer_read(int dev, struct file *file, char __user *buf, int count) -{ - int c = count, p = 0; - int ev_len; - unsigned long flags; - - dev = dev >> 4; - - ev_len = seq_mode == SEQ_1 ? 4 : 8; - - spin_lock_irqsave(&lock,flags); - - if (!iqlen) - { - spin_unlock_irqrestore(&lock,flags); - if (file->f_flags & O_NONBLOCK) { - return -EAGAIN; - } - - oss_broken_sleep_on(&midi_sleeper, pre_event_timeout); - spin_lock_irqsave(&lock,flags); - if (!iqlen) - { - spin_unlock_irqrestore(&lock,flags); - return 0; - } - } - while (iqlen && c >= ev_len) - { - char *fixit = (char *) &iqueue[iqhead * IEV_SZ]; - spin_unlock_irqrestore(&lock,flags); - if (copy_to_user(&(buf)[p], fixit, ev_len)) - return count - c; - p += ev_len; - c -= ev_len; - - spin_lock_irqsave(&lock,flags); - iqhead = (iqhead + 1) % SEQ_MAX_QUEUE; - iqlen--; - } - spin_unlock_irqrestore(&lock,flags); - return count - c; -} - -static void sequencer_midi_output(int dev) -{ - /* - * Currently NOP - */ -} - -void seq_copy_to_input(unsigned char *event_rec, int len) -{ - unsigned long flags; - - /* - * Verify that the len is valid for the current mode. - */ - - if (len != 4 && len != 8) - return; - if ((seq_mode == SEQ_1) != (len == 4)) - return; - - if (iqlen >= (SEQ_MAX_QUEUE - 1)) - return; /* Overflow */ - - spin_lock_irqsave(&lock,flags); - memcpy(&iqueue[iqtail * IEV_SZ], event_rec, len); - iqlen++; - iqtail = (iqtail + 1) % SEQ_MAX_QUEUE; - wake_up(&midi_sleeper); - spin_unlock_irqrestore(&lock,flags); -} -EXPORT_SYMBOL(seq_copy_to_input); - -static void sequencer_midi_input(int dev, unsigned char data) -{ - unsigned int tstamp; - unsigned char event_rec[4]; - - if (data == 0xfe) /* Ignore active sensing */ - return; - - tstamp = jiffies - seq_time; - - if (tstamp != prev_input_time) - { - tstamp = (tstamp << 8) | SEQ_WAIT; - seq_copy_to_input((unsigned char *) &tstamp, 4); - prev_input_time = tstamp; - } - event_rec[0] = SEQ_MIDIPUTC; - event_rec[1] = data; - event_rec[2] = dev; - event_rec[3] = 0; - - seq_copy_to_input(event_rec, 4); -} - -void seq_input_event(unsigned char *event_rec, int len) -{ - unsigned long this_time; - - if (seq_mode == SEQ_2) - this_time = tmr->get_time(tmr_no); - else - this_time = jiffies - seq_time; - - if (this_time != prev_input_time) - { - unsigned char tmp_event[8]; - - tmp_event[0] = EV_TIMING; - tmp_event[1] = TMR_WAIT_ABS; - tmp_event[2] = 0; - tmp_event[3] = 0; - *(unsigned int *) &tmp_event[4] = this_time; - - seq_copy_to_input(tmp_event, 8); - prev_input_time = this_time; - } - seq_copy_to_input(event_rec, len); -} -EXPORT_SYMBOL(seq_input_event); - -int sequencer_write(int dev, struct file *file, const char __user *buf, int count) -{ - unsigned char event_rec[EV_SZ], ev_code; - int p = 0, c, ev_size; - int mode = translate_mode(file); - - dev = dev >> 4; - - if (mode == OPEN_READ) - return -EIO; - - c = count; - - while (c >= 4) - { - if (copy_from_user((char *) event_rec, &(buf)[p], 4)) - goto out; - ev_code = event_rec[0]; - - if (ev_code == SEQ_FULLSIZE) - { - int err, fmt; - - dev = *(unsigned short *) &event_rec[2]; - if (dev < 0 || dev >= max_synthdev || synth_devs[dev] == NULL) - return -ENXIO; - - if (!(synth_open_mask & (1 << dev))) - return -ENXIO; - - fmt = (*(short *) &event_rec[0]) & 0xffff; - err = synth_devs[dev]->load_patch(dev, fmt, buf + p, c, 0); - if (err < 0) - return err; - - return err; - } - if (ev_code >= 128) - { - if (seq_mode == SEQ_2 && ev_code == SEQ_EXTENDED) - { - printk(KERN_WARNING "Sequencer: Invalid level 2 event %x\n", ev_code); - return -EINVAL; - } - ev_size = 8; - - if (c < ev_size) - { - if (!seq_playing) - seq_startplay(); - return count - c; - } - if (copy_from_user((char *)&event_rec[4], - &(buf)[p + 4], 4)) - goto out; - - } - else - { - if (seq_mode == SEQ_2) - { - printk(KERN_WARNING "Sequencer: 4 byte event in level 2 mode\n"); - return -EINVAL; - } - ev_size = 4; - - if (event_rec[0] != SEQ_MIDIPUTC) - obsolete_api_used = 1; - } - - if (event_rec[0] == SEQ_MIDIPUTC) - { - if (!midi_opened[event_rec[2]]) - { - int err, mode; - int dev = event_rec[2]; - - if (dev >= max_mididev || midi_devs[dev]==NULL) - { - /*printk("Sequencer Error: Nonexistent MIDI device %d\n", dev);*/ - return -ENXIO; - } - mode = translate_mode(file); - - if ((err = midi_devs[dev]->open(dev, mode, - sequencer_midi_input, sequencer_midi_output)) < 0) - { - seq_reset(); - printk(KERN_WARNING "Sequencer Error: Unable to open Midi #%d\n", dev); - return err; - } - midi_opened[dev] = 1; - } - } - if (!seq_queue(event_rec, (file->f_flags & (O_NONBLOCK) ? 1 : 0))) - { - int processed = count - c; - - if (!seq_playing) - seq_startplay(); - - if (!processed && (file->f_flags & O_NONBLOCK)) - return -EAGAIN; - else - return processed; - } - p += ev_size; - c -= ev_size; - } - - if (!seq_playing) - seq_startplay(); -out: - return count; -} - -static int seq_queue(unsigned char *note, char nonblock) -{ - - /* - * Test if there is space in the queue - */ - - if (qlen >= SEQ_MAX_QUEUE) - if (!seq_playing) - seq_startplay(); /* - * Give chance to drain the queue - */ - - if (!nonblock && qlen >= SEQ_MAX_QUEUE && !waitqueue_active(&seq_sleeper)) { - /* - * Sleep until there is enough space on the queue - */ - oss_broken_sleep_on(&seq_sleeper, MAX_SCHEDULE_TIMEOUT); - } - if (qlen >= SEQ_MAX_QUEUE) - { - return 0; /* - * To be sure - */ - } - memcpy(&queue[qtail * EV_SZ], note, EV_SZ); - - qtail = (qtail + 1) % SEQ_MAX_QUEUE; - qlen++; - - return 1; -} - -static int extended_event(unsigned char *q) -{ - int dev = q[2]; - - if (dev < 0 || dev >= max_synthdev) - return -ENXIO; - - if (!(synth_open_mask & (1 << dev))) - return -ENXIO; - - switch (q[1]) - { - case SEQ_NOTEOFF: - synth_devs[dev]->kill_note(dev, q[3], q[4], q[5]); - break; - - case SEQ_NOTEON: - if (q[4] > 127 && q[4] != 255) - return 0; - - if (q[5] == 0) - { - synth_devs[dev]->kill_note(dev, q[3], q[4], q[5]); - break; - } - synth_devs[dev]->start_note(dev, q[3], q[4], q[5]); - break; - - case SEQ_PGMCHANGE: - synth_devs[dev]->set_instr(dev, q[3], q[4]); - break; - - case SEQ_AFTERTOUCH: - synth_devs[dev]->aftertouch(dev, q[3], q[4]); - break; - - case SEQ_BALANCE: - synth_devs[dev]->panning(dev, q[3], (char) q[4]); - break; - - case SEQ_CONTROLLER: - synth_devs[dev]->controller(dev, q[3], q[4], (short) (q[5] | (q[6] << 8))); - break; - - case SEQ_VOLMODE: - if (synth_devs[dev]->volume_method != NULL) - synth_devs[dev]->volume_method(dev, q[3]); - break; - - default: - return -EINVAL; - } - return 0; -} - -static int find_voice(int dev, int chn, int note) -{ - unsigned short key; - int i; - - key = (chn << 8) | (note + 1); - for (i = 0; i < synth_devs[dev]->alloc.max_voice; i++) - if (synth_devs[dev]->alloc.map[i] == key) - return i; - return -1; -} - -static int alloc_voice(int dev, int chn, int note) -{ - unsigned short key; - int voice; - - key = (chn << 8) | (note + 1); - - voice = synth_devs[dev]->alloc_voice(dev, chn, note, - &synth_devs[dev]->alloc); - synth_devs[dev]->alloc.map[voice] = key; - synth_devs[dev]->alloc.alloc_times[voice] = - synth_devs[dev]->alloc.timestamp++; - return voice; -} - -static void seq_chn_voice_event(unsigned char *event_rec) -{ -#define dev event_rec[1] -#define cmd event_rec[2] -#define chn event_rec[3] -#define note event_rec[4] -#define parm event_rec[5] - - int voice = -1; - - if ((int) dev > max_synthdev || synth_devs[dev] == NULL) - return; - if (!(synth_open_mask & (1 << dev))) - return; - if (!synth_devs[dev]) - return; - - if (seq_mode == SEQ_2) - { - if (synth_devs[dev]->alloc_voice) - voice = find_voice(dev, chn, note); - - if (cmd == MIDI_NOTEON && parm == 0) - { - cmd = MIDI_NOTEOFF; - parm = 64; - } - } - - switch (cmd) - { - case MIDI_NOTEON: - if (note > 127 && note != 255) /* Not a seq2 feature */ - return; - - if (voice == -1 && seq_mode == SEQ_2 && synth_devs[dev]->alloc_voice) - { - /* Internal synthesizer (FM, GUS, etc) */ - voice = alloc_voice(dev, chn, note); - } - if (voice == -1) - voice = chn; - - if (seq_mode == SEQ_2 && (int) dev < num_synths) - { - /* - * The MIDI channel 10 is a percussive channel. Use the note - * number to select the proper patch (128 to 255) to play. - */ - - if (chn == 9) - { - synth_devs[dev]->set_instr(dev, voice, 128 + note); - synth_devs[dev]->chn_info[chn].pgm_num = 128 + note; - } - synth_devs[dev]->setup_voice(dev, voice, chn); - } - synth_devs[dev]->start_note(dev, voice, note, parm); - break; - - case MIDI_NOTEOFF: - if (voice == -1) - voice = chn; - synth_devs[dev]->kill_note(dev, voice, note, parm); - break; - - case MIDI_KEY_PRESSURE: - if (voice == -1) - voice = chn; - synth_devs[dev]->aftertouch(dev, voice, parm); - break; - - default:; - } -#undef dev -#undef cmd -#undef chn -#undef note -#undef parm -} - - -static void seq_chn_common_event(unsigned char *event_rec) -{ - unsigned char dev = event_rec[1]; - unsigned char cmd = event_rec[2]; - unsigned char chn = event_rec[3]; - unsigned char p1 = event_rec[4]; - - /* unsigned char p2 = event_rec[5]; */ - unsigned short w14 = *(short *) &event_rec[6]; - - if ((int) dev > max_synthdev || synth_devs[dev] == NULL) - return; - if (!(synth_open_mask & (1 << dev))) - return; - if (!synth_devs[dev]) - return; - - switch (cmd) - { - case MIDI_PGM_CHANGE: - if (seq_mode == SEQ_2) - { - if (chn > 15) - break; - - synth_devs[dev]->chn_info[chn].pgm_num = p1; - if ((int) dev >= num_synths) - synth_devs[dev]->set_instr(dev, chn, p1); - } - else - synth_devs[dev]->set_instr(dev, chn, p1); - - break; - - case MIDI_CTL_CHANGE: - if (seq_mode == SEQ_2) - { - if (chn > 15 || p1 > 127) - break; - - synth_devs[dev]->chn_info[chn].controllers[p1] = w14 & 0x7f; - - if (p1 < 32) /* Setting MSB should clear LSB to 0 */ - synth_devs[dev]->chn_info[chn].controllers[p1 + 32] = 0; - - if ((int) dev < num_synths) - { - int val = w14 & 0x7f; - int i, key; - - if (p1 < 64) /* Combine MSB and LSB */ - { - val = ((synth_devs[dev]-> - chn_info[chn].controllers[p1 & ~32] & 0x7f) << 7) - | (synth_devs[dev]-> - chn_info[chn].controllers[p1 | 32] & 0x7f); - p1 &= ~32; - } - /* Handle all playing notes on this channel */ - - key = ((int) chn << 8); - - for (i = 0; i < synth_devs[dev]->alloc.max_voice; i++) - if ((synth_devs[dev]->alloc.map[i] & 0xff00) == key) - synth_devs[dev]->controller(dev, i, p1, val); - } - else - synth_devs[dev]->controller(dev, chn, p1, w14); - } - else /* Mode 1 */ - synth_devs[dev]->controller(dev, chn, p1, w14); - break; - - case MIDI_PITCH_BEND: - if (seq_mode == SEQ_2) - { - if (chn > 15) - break; - - synth_devs[dev]->chn_info[chn].bender_value = w14; - - if ((int) dev < num_synths) - { - /* Handle all playing notes on this channel */ - int i, key; - - key = (chn << 8); - - for (i = 0; i < synth_devs[dev]->alloc.max_voice; i++) - if ((synth_devs[dev]->alloc.map[i] & 0xff00) == key) - synth_devs[dev]->bender(dev, i, w14); - } - else - synth_devs[dev]->bender(dev, chn, w14); - } - else /* MODE 1 */ - synth_devs[dev]->bender(dev, chn, w14); - break; - - default:; - } -} - -static int seq_timing_event(unsigned char *event_rec) -{ - unsigned char cmd = event_rec[1]; - unsigned int parm = *(int *) &event_rec[4]; - - if (seq_mode == SEQ_2) - { - int ret; - - if ((ret = tmr->event(tmr_no, event_rec)) == TIMER_ARMED) - if ((SEQ_MAX_QUEUE - qlen) >= output_threshold) - wake_up(&seq_sleeper); - return ret; - } - switch (cmd) - { - case TMR_WAIT_REL: - parm += prev_event_time; - - /* - * NOTE! No break here. Execution of TMR_WAIT_REL continues in the - * next case (TMR_WAIT_ABS) - */ - - case TMR_WAIT_ABS: - if (parm > 0) - { - long time; - - time = parm; - prev_event_time = time; - - seq_playing = 1; - request_sound_timer(time); - - if ((SEQ_MAX_QUEUE - qlen) >= output_threshold) - wake_up(&seq_sleeper); - return TIMER_ARMED; - } - break; - - case TMR_START: - seq_time = jiffies; - prev_input_time = 0; - prev_event_time = 0; - break; - - case TMR_STOP: - break; - - case TMR_CONTINUE: - break; - - case TMR_TEMPO: - break; - - case TMR_ECHO: - parm = (parm << 8 | SEQ_ECHO); - seq_copy_to_input((unsigned char *) &parm, 4); - break; - - default:; - } - - return TIMER_NOT_ARMED; -} - -static void seq_local_event(unsigned char *event_rec) -{ - unsigned char cmd = event_rec[1]; - unsigned int parm = *((unsigned int *) &event_rec[4]); - - switch (cmd) - { - case LOCL_STARTAUDIO: - DMAbuf_start_devices(parm); - break; - - default:; - } -} - -static void seq_sysex_message(unsigned char *event_rec) -{ - unsigned int dev = event_rec[1]; - int i, l = 0; - unsigned char *buf = &event_rec[2]; - - if (dev > max_synthdev) - return; - if (!(synth_open_mask & (1 << dev))) - return; - if (!synth_devs[dev]) - return; - - l = 0; - for (i = 0; i < 6 && buf[i] != 0xff; i++) - l = i + 1; - - if (!synth_devs[dev]->send_sysex) - return; - if (l > 0) - synth_devs[dev]->send_sysex(dev, buf, l); -} - -static int play_event(unsigned char *q) -{ - /* - * NOTE! This routine returns - * 0 = normal event played. - * 1 = Timer armed. Suspend playback until timer callback. - * 2 = MIDI output buffer full. Restore queue and suspend until timer - */ - unsigned int *delay; - - switch (q[0]) - { - case SEQ_NOTEOFF: - if (synth_open_mask & (1 << 0)) - if (synth_devs[0]) - synth_devs[0]->kill_note(0, q[1], 255, q[3]); - break; - - case SEQ_NOTEON: - if (q[4] < 128 || q[4] == 255) - if (synth_open_mask & (1 << 0)) - if (synth_devs[0]) - synth_devs[0]->start_note(0, q[1], q[2], q[3]); - break; - - case SEQ_WAIT: - delay = (unsigned int *) q; /* - * Bytes 1 to 3 are containing the * - * delay in 'ticks' - */ - *delay = (*delay >> 8) & 0xffffff; - - if (*delay > 0) - { - long time; - - seq_playing = 1; - time = *delay; - prev_event_time = time; - - request_sound_timer(time); - - if ((SEQ_MAX_QUEUE - qlen) >= output_threshold) - wake_up(&seq_sleeper); - /* - * The timer is now active and will reinvoke this function - * after the timer expires. Return to the caller now. - */ - return 1; - } - break; - - case SEQ_PGMCHANGE: - if (synth_open_mask & (1 << 0)) - if (synth_devs[0]) - synth_devs[0]->set_instr(0, q[1], q[2]); - break; - - case SEQ_SYNCTIMER: /* - * Reset timer - */ - seq_time = jiffies; - prev_input_time = 0; - prev_event_time = 0; - break; - - case SEQ_MIDIPUTC: /* - * Put a midi character - */ - if (midi_opened[q[2]]) - { - int dev; - - dev = q[2]; - - if (dev < 0 || dev >= num_midis || midi_devs[dev] == NULL) - break; - - if (!midi_devs[dev]->outputc(dev, q[1])) - { - /* - * Output FIFO is full. Wait one timer cycle and try again. - */ - - seq_playing = 1; - request_sound_timer(-1); - return 2; - } - else - midi_written[dev] = 1; - } - break; - - case SEQ_ECHO: - seq_copy_to_input(q, 4); /* - * Echo back to the process - */ - break; - - case SEQ_PRIVATE: - if ((int) q[1] < max_synthdev) - synth_devs[q[1]]->hw_control(q[1], q); - break; - - case SEQ_EXTENDED: - extended_event(q); - break; - - case EV_CHN_VOICE: - seq_chn_voice_event(q); - break; - - case EV_CHN_COMMON: - seq_chn_common_event(q); - break; - - case EV_TIMING: - if (seq_timing_event(q) == TIMER_ARMED) - { - return 1; - } - break; - - case EV_SEQ_LOCAL: - seq_local_event(q); - break; - - case EV_SYSEX: - seq_sysex_message(q); - break; - - default:; - } - return 0; -} - -/* called also as timer in irq context */ -static void seq_startplay(void) -{ - int this_one, action; - unsigned long flags; - - while (qlen > 0) - { - - spin_lock_irqsave(&lock,flags); - qhead = ((this_one = qhead) + 1) % SEQ_MAX_QUEUE; - qlen--; - spin_unlock_irqrestore(&lock,flags); - - seq_playing = 1; - - if ((action = play_event(&queue[this_one * EV_SZ]))) - { /* Suspend playback. Next timer routine invokes this routine again */ - if (action == 2) - { - qlen++; - qhead = this_one; - } - return; - } - } - - seq_playing = 0; - - if ((SEQ_MAX_QUEUE - qlen) >= output_threshold) - wake_up(&seq_sleeper); -} - -static void reset_controllers(int dev, unsigned char *controller, int update_dev) -{ - int i; - for (i = 0; i < 128; i++) - controller[i] = ctrl_def_values[i]; -} - -static void setup_mode2(void) -{ - int dev; - - max_synthdev = num_synths; - - for (dev = 0; dev < num_midis; dev++) - { - if (midi_devs[dev] && midi_devs[dev]->converter != NULL) - { - synth_devs[max_synthdev++] = midi_devs[dev]->converter; - } - } - - for (dev = 0; dev < max_synthdev; dev++) - { - int chn; - - synth_devs[dev]->sysex_ptr = 0; - synth_devs[dev]->emulation = 0; - - for (chn = 0; chn < 16; chn++) - { - synth_devs[dev]->chn_info[chn].pgm_num = 0; - reset_controllers(dev, - synth_devs[dev]->chn_info[chn].controllers,0); - synth_devs[dev]->chn_info[chn].bender_value = (1 << 7); /* Neutral */ - synth_devs[dev]->chn_info[chn].bender_range = 200; - } - } - max_mididev = 0; - seq_mode = SEQ_2; -} - -int sequencer_open(int dev, struct file *file) -{ - int retval, mode, i; - int level, tmp; - - if (!sequencer_ok) - sequencer_init(); - - level = ((dev & 0x0f) == SND_DEV_SEQ2) ? 2 : 1; - - dev = dev >> 4; - mode = translate_mode(file); - - if (!sequencer_ok) - { -/* printk("Sound card: sequencer not initialized\n");*/ - return -ENXIO; - } - if (dev) /* Patch manager device (obsolete) */ - return -ENXIO; - - if(synth_devs[dev] == NULL) - request_module("synth0"); - - if (mode == OPEN_READ) - { - if (!num_midis) - { - /*printk("Sequencer: No MIDI devices. Input not possible\n");*/ - sequencer_busy = 0; - return -ENXIO; - } - } - if (sequencer_busy) - { - return -EBUSY; - } - sequencer_busy = 1; - obsolete_api_used = 0; - - max_mididev = num_midis; - max_synthdev = num_synths; - pre_event_timeout = MAX_SCHEDULE_TIMEOUT; - seq_mode = SEQ_1; - - if (pending_timer != -1) - { - tmr_no = pending_timer; - pending_timer = -1; - } - if (tmr_no == -1) /* Not selected yet */ - { - int i, best; - - best = -1; - for (i = 0; i < num_sound_timers; i++) - if (sound_timer_devs[i] && sound_timer_devs[i]->priority > best) - { - tmr_no = i; - best = sound_timer_devs[i]->priority; - } - if (tmr_no == -1) /* Should not be */ - tmr_no = 0; - } - tmr = sound_timer_devs[tmr_no]; - - if (level == 2) - { - if (tmr == NULL) - { - /*printk("sequencer: No timer for level 2\n");*/ - sequencer_busy = 0; - return -ENXIO; - } - setup_mode2(); - } - if (!max_synthdev && !max_mididev) - { - sequencer_busy=0; - return -ENXIO; - } - - synth_open_mask = 0; - - for (i = 0; i < max_mididev; i++) - { - midi_opened[i] = 0; - midi_written[i] = 0; - } - - for (i = 0; i < max_synthdev; i++) - { - if (synth_devs[i]==NULL) - continue; - - if (!try_module_get(synth_devs[i]->owner)) - continue; - - if ((tmp = synth_devs[i]->open(i, mode)) < 0) - { - printk(KERN_WARNING "Sequencer: Warning! Cannot open synth device #%d (%d)\n", i, tmp); - if (synth_devs[i]->midi_dev) - printk(KERN_WARNING "(Maps to MIDI dev #%d)\n", synth_devs[i]->midi_dev); - } - else - { - synth_open_mask |= (1 << i); - if (synth_devs[i]->midi_dev) - midi_opened[synth_devs[i]->midi_dev] = 1; - } - } - - seq_time = jiffies; - - prev_input_time = 0; - prev_event_time = 0; - - if (seq_mode == SEQ_1 && (mode == OPEN_READ || mode == OPEN_READWRITE)) - { - /* - * Initialize midi input devices - */ - - for (i = 0; i < max_mididev; i++) - if (!midi_opened[i] && midi_devs[i]) - { - if (!try_module_get(midi_devs[i]->owner)) - continue; - - if ((retval = midi_devs[i]->open(i, mode, - sequencer_midi_input, sequencer_midi_output)) >= 0) - { - midi_opened[i] = 1; - } - } - } - - if (seq_mode == SEQ_2) { - if (try_module_get(tmr->owner)) - tmr->open(tmr_no, seq_mode); - } - - init_waitqueue_head(&seq_sleeper); - init_waitqueue_head(&midi_sleeper); - output_threshold = SEQ_MAX_QUEUE / 2; - - return 0; -} - -static void seq_drain_midi_queues(void) -{ - int i, n; - - /* - * Give the Midi drivers time to drain their output queues - */ - - n = 1; - - while (!signal_pending(current) && n) - { - n = 0; - - for (i = 0; i < max_mididev; i++) - if (midi_opened[i] && midi_written[i]) - if (midi_devs[i]->buffer_status != NULL) - if (midi_devs[i]->buffer_status(i)) - n++; - - /* - * Let's have a delay - */ - - if (n) - oss_broken_sleep_on(&seq_sleeper, HZ/10); - } -} - -void sequencer_release(int dev, struct file *file) -{ - int i; - int mode = translate_mode(file); - - dev = dev >> 4; - - /* - * Wait until the queue is empty (if we don't have nonblock) - */ - - if (mode != OPEN_READ && !(file->f_flags & O_NONBLOCK)) - { - while (!signal_pending(current) && qlen > 0) - { - seq_sync(); - oss_broken_sleep_on(&seq_sleeper, 3*HZ); - /* Extra delay */ - } - } - - if (mode != OPEN_READ) - seq_drain_midi_queues(); /* - * Ensure the output queues are empty - */ - seq_reset(); - if (mode != OPEN_READ) - seq_drain_midi_queues(); /* - * Flush the all notes off messages - */ - - for (i = 0; i < max_synthdev; i++) - { - if (synth_open_mask & (1 << i)) /* - * Actually opened - */ - if (synth_devs[i]) - { - synth_devs[i]->close(i); - - module_put(synth_devs[i]->owner); - - if (synth_devs[i]->midi_dev) - midi_opened[synth_devs[i]->midi_dev] = 0; - } - } - - for (i = 0; i < max_mididev; i++) - { - if (midi_opened[i]) { - midi_devs[i]->close(i); - module_put(midi_devs[i]->owner); - } - } - - if (seq_mode == SEQ_2) { - tmr->close(tmr_no); - module_put(tmr->owner); - } - - if (obsolete_api_used) - printk(KERN_WARNING "/dev/music: Obsolete (4 byte) API was used by %s\n", current->comm); - sequencer_busy = 0; -} - -static int seq_sync(void) -{ - if (qlen && !seq_playing && !signal_pending(current)) - seq_startplay(); - - if (qlen > 0) - oss_broken_sleep_on(&seq_sleeper, HZ); - return qlen; -} - -static void midi_outc(int dev, unsigned char data) -{ - /* - * NOTE! Calls sleep(). Don't call this from interrupt. - */ - - int n; - unsigned long flags; - - /* - * This routine sends one byte to the Midi channel. - * If the output FIFO is full, it waits until there - * is space in the queue - */ - - n = 3 * HZ; /* Timeout */ - - spin_lock_irqsave(&lock,flags); - while (n && !midi_devs[dev]->outputc(dev, data)) { - oss_broken_sleep_on(&seq_sleeper, HZ/25); - n--; - } - spin_unlock_irqrestore(&lock,flags); -} - -static void seq_reset(void) -{ - /* - * NOTE! Calls sleep(). Don't call this from interrupt. - */ - - int i; - int chn; - unsigned long flags; - - sound_stop_timer(); - - seq_time = jiffies; - prev_input_time = 0; - prev_event_time = 0; - - qlen = qhead = qtail = 0; - iqlen = iqhead = iqtail = 0; - - for (i = 0; i < max_synthdev; i++) - if (synth_open_mask & (1 << i)) - if (synth_devs[i]) - synth_devs[i]->reset(i); - - if (seq_mode == SEQ_2) - { - for (chn = 0; chn < 16; chn++) - for (i = 0; i < max_synthdev; i++) - if (synth_open_mask & (1 << i)) - if (synth_devs[i]) - { - synth_devs[i]->controller(i, chn, 123, 0); /* All notes off */ - synth_devs[i]->controller(i, chn, 121, 0); /* Reset all ctl */ - synth_devs[i]->bender(i, chn, 1 << 13); /* Bender off */ - } - } - else /* seq_mode == SEQ_1 */ - { - for (i = 0; i < max_mididev; i++) - if (midi_written[i]) /* - * Midi used. Some notes may still be playing - */ - { - /* - * Sending just a ACTIVE SENSING message should be enough to stop all - * playing notes. Since there are devices not recognizing the - * active sensing, we have to send some all notes off messages also. - */ - midi_outc(i, 0xfe); - - for (chn = 0; chn < 16; chn++) - { - midi_outc(i, (unsigned char) (0xb0 + (chn & 0x0f))); /* control change */ - midi_outc(i, 0x7b); /* All notes off */ - midi_outc(i, 0); /* Dummy parameter */ - } - - midi_devs[i]->close(i); - - midi_written[i] = 0; - midi_opened[i] = 0; - } - } - - seq_playing = 0; - - spin_lock_irqsave(&lock,flags); - - if (waitqueue_active(&seq_sleeper)) { - /* printk( "Sequencer Warning: Unexpected sleeping process - Waking up\n"); */ - wake_up(&seq_sleeper); - } - spin_unlock_irqrestore(&lock,flags); -} - -static void seq_panic(void) -{ - /* - * This routine is called by the application in case the user - * wants to reset the system to the default state. - */ - - seq_reset(); - - /* - * Since some of the devices don't recognize the active sensing and - * all notes off messages, we have to shut all notes manually. - * - * TO BE IMPLEMENTED LATER - */ - - /* - * Also return the controllers to their default states - */ -} - -int sequencer_ioctl(int dev, struct file *file, unsigned int cmd, void __user *arg) -{ - int midi_dev, orig_dev, val, err; - int mode = translate_mode(file); - struct synth_info inf; - struct seq_event_rec event_rec; - int __user *p = arg; - - orig_dev = dev = dev >> 4; - - switch (cmd) - { - case SNDCTL_TMR_TIMEBASE: - case SNDCTL_TMR_TEMPO: - case SNDCTL_TMR_START: - case SNDCTL_TMR_STOP: - case SNDCTL_TMR_CONTINUE: - case SNDCTL_TMR_METRONOME: - case SNDCTL_TMR_SOURCE: - if (seq_mode != SEQ_2) - return -EINVAL; - return tmr->ioctl(tmr_no, cmd, arg); - - case SNDCTL_TMR_SELECT: - if (seq_mode != SEQ_2) - return -EINVAL; - if (get_user(pending_timer, p)) - return -EFAULT; - if (pending_timer < 0 || pending_timer >= num_sound_timers || sound_timer_devs[pending_timer] == NULL) - { - pending_timer = -1; - return -EINVAL; - } - val = pending_timer; - break; - - case SNDCTL_SEQ_PANIC: - seq_panic(); - return -EINVAL; - - case SNDCTL_SEQ_SYNC: - if (mode == OPEN_READ) - return 0; - while (qlen > 0 && !signal_pending(current)) - seq_sync(); - return qlen ? -EINTR : 0; - - case SNDCTL_SEQ_RESET: - seq_reset(); - return 0; - - case SNDCTL_SEQ_TESTMIDI: - if (__get_user(midi_dev, p)) - return -EFAULT; - if (midi_dev < 0 || midi_dev >= max_mididev || !midi_devs[midi_dev]) - return -ENXIO; - - if (!midi_opened[midi_dev] && - (err = midi_devs[midi_dev]->open(midi_dev, mode, sequencer_midi_input, - sequencer_midi_output)) < 0) - return err; - midi_opened[midi_dev] = 1; - return 0; - - case SNDCTL_SEQ_GETINCOUNT: - if (mode == OPEN_WRITE) - return 0; - val = iqlen; - break; - - case SNDCTL_SEQ_GETOUTCOUNT: - if (mode == OPEN_READ) - return 0; - val = SEQ_MAX_QUEUE - qlen; - break; - - case SNDCTL_SEQ_GETTIME: - if (seq_mode == SEQ_2) - return tmr->ioctl(tmr_no, cmd, arg); - val = jiffies - seq_time; - break; - - case SNDCTL_SEQ_CTRLRATE: - /* - * If *arg == 0, just return the current rate - */ - if (seq_mode == SEQ_2) - return tmr->ioctl(tmr_no, cmd, arg); - - if (get_user(val, p)) - return -EFAULT; - if (val != 0) - return -EINVAL; - val = HZ; - break; - - case SNDCTL_SEQ_RESETSAMPLES: - case SNDCTL_SYNTH_REMOVESAMPLE: - case SNDCTL_SYNTH_CONTROL: - if (get_user(dev, p)) - return -EFAULT; - if (dev < 0 || dev >= num_synths || synth_devs[dev] == NULL) - return -ENXIO; - if (!(synth_open_mask & (1 << dev)) && !orig_dev) - return -EBUSY; - return synth_devs[dev]->ioctl(dev, cmd, arg); - - case SNDCTL_SEQ_NRSYNTHS: - val = max_synthdev; - break; - - case SNDCTL_SEQ_NRMIDIS: - val = max_mididev; - break; - - case SNDCTL_SYNTH_MEMAVL: - if (get_user(dev, p)) - return -EFAULT; - if (dev < 0 || dev >= num_synths || synth_devs[dev] == NULL) - return -ENXIO; - if (!(synth_open_mask & (1 << dev)) && !orig_dev) - return -EBUSY; - val = synth_devs[dev]->ioctl(dev, cmd, arg); - break; - - case SNDCTL_FM_4OP_ENABLE: - if (get_user(dev, p)) - return -EFAULT; - if (dev < 0 || dev >= num_synths || synth_devs[dev] == NULL) - return -ENXIO; - if (!(synth_open_mask & (1 << dev))) - return -ENXIO; - synth_devs[dev]->ioctl(dev, cmd, arg); - return 0; - - case SNDCTL_SYNTH_INFO: - if (get_user(dev, &((struct synth_info __user *)arg)->device)) - return -EFAULT; - if (dev < 0 || dev >= max_synthdev) - return -ENXIO; - if (!(synth_open_mask & (1 << dev)) && !orig_dev) - return -EBUSY; - return synth_devs[dev]->ioctl(dev, cmd, arg); - - /* Like SYNTH_INFO but returns ID in the name field */ - case SNDCTL_SYNTH_ID: - if (get_user(dev, &((struct synth_info __user *)arg)->device)) - return -EFAULT; - if (dev < 0 || dev >= max_synthdev) - return -ENXIO; - if (!(synth_open_mask & (1 << dev)) && !orig_dev) - return -EBUSY; - memcpy(&inf, synth_devs[dev]->info, sizeof(inf)); - strlcpy(inf.name, synth_devs[dev]->id, sizeof(inf.name)); - inf.device = dev; - return copy_to_user(arg, &inf, sizeof(inf))?-EFAULT:0; - - case SNDCTL_SEQ_OUTOFBAND: - if (copy_from_user(&event_rec, arg, sizeof(event_rec))) - return -EFAULT; - play_event(event_rec.arr); - return 0; - - case SNDCTL_MIDI_INFO: - if (get_user(dev, &((struct midi_info __user *)arg)->device)) - return -EFAULT; - if (dev < 0 || dev >= max_mididev || !midi_devs[dev]) - return -ENXIO; - midi_devs[dev]->info.device = dev; - return copy_to_user(arg, &midi_devs[dev]->info, sizeof(struct midi_info))?-EFAULT:0; - - case SNDCTL_SEQ_THRESHOLD: - if (get_user(val, p)) - return -EFAULT; - if (val < 1) - val = 1; - if (val >= SEQ_MAX_QUEUE) - val = SEQ_MAX_QUEUE - 1; - output_threshold = val; - return 0; - - case SNDCTL_MIDI_PRETIME: - if (get_user(val, p)) - return -EFAULT; - if (val < 0) - val = 0; - val = (HZ * val) / 10; - pre_event_timeout = val; - break; - - default: - if (mode == OPEN_READ) - return -EIO; - if (!synth_devs[0]) - return -ENXIO; - if (!(synth_open_mask & (1 << 0))) - return -ENXIO; - if (!synth_devs[0]->ioctl) - return -EINVAL; - return synth_devs[0]->ioctl(0, cmd, arg); - } - return put_user(val, p); -} - -/* No kernel lock - we're using the global irq lock here */ -unsigned int sequencer_poll(int dev, struct file *file, poll_table * wait) -{ - unsigned long flags; - unsigned int mask = 0; - - dev = dev >> 4; - - spin_lock_irqsave(&lock,flags); - /* input */ - poll_wait(file, &midi_sleeper, wait); - if (iqlen) - mask |= POLLIN | POLLRDNORM; - - /* output */ - poll_wait(file, &seq_sleeper, wait); - if ((SEQ_MAX_QUEUE - qlen) >= output_threshold) - mask |= POLLOUT | POLLWRNORM; - spin_unlock_irqrestore(&lock,flags); - return mask; -} - - -void sequencer_timer(unsigned long dummy) -{ - seq_startplay(); -} -EXPORT_SYMBOL(sequencer_timer); - -int note_to_freq(int note_num) -{ - - /* - * This routine converts a midi note to a frequency (multiplied by 1000) - */ - - int note, octave, note_freq; - static int notes[] = - { - 261632, 277189, 293671, 311132, 329632, 349232, - 369998, 391998, 415306, 440000, 466162, 493880 - }; - -#define BASE_OCTAVE 5 - - octave = note_num / 12; - note = note_num % 12; - - note_freq = notes[note]; - - if (octave < BASE_OCTAVE) - note_freq >>= (BASE_OCTAVE - octave); - else if (octave > BASE_OCTAVE) - note_freq <<= (octave - BASE_OCTAVE); - - /* - * note_freq >>= 1; - */ - - return note_freq; -} -EXPORT_SYMBOL(note_to_freq); - -unsigned long compute_finetune(unsigned long base_freq, int bend, int range, - int vibrato_cents) -{ - unsigned long amount; - int negative, semitones, cents, multiplier = 1; - - if (!bend) - return base_freq; - if (!range) - return base_freq; - - if (!base_freq) - return base_freq; - - if (range >= 8192) - range = 8192; - - bend = bend * range / 8192; /* Convert to cents */ - bend += vibrato_cents; - - if (!bend) - return base_freq; - - negative = bend < 0 ? 1 : 0; - - if (bend < 0) - bend *= -1; - if (bend > range) - bend = range; - - /* - if (bend > 2399) - bend = 2399; - */ - while (bend > 2399) - { - multiplier *= 4; - bend -= 2400; - } - - semitones = bend / 100; - cents = bend % 100; - - amount = (int) (semitone_tuning[semitones] * multiplier * cent_tuning[cents]) / 10000; - - if (negative) - return (base_freq * 10000) / amount; /* Bend down */ - else - return (base_freq * amount) / 10000; /* Bend up */ -} -EXPORT_SYMBOL(compute_finetune); - -void sequencer_init(void) -{ - if (sequencer_ok) - return; - queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ); - if (queue == NULL) - { - printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n"); - return; - } - iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ); - if (iqueue == NULL) - { - printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n"); - vfree(queue); - return; - } - sequencer_ok = 1; -} -EXPORT_SYMBOL(sequencer_init); - -void sequencer_unload(void) -{ - vfree(queue); - vfree(iqueue); - queue = iqueue = NULL; -} diff --git a/sound/oss/sleep.h b/sound/oss/sleep.h deleted file mode 100644 index a20fc925a5ce..000000000000 --- a/sound/oss/sleep.h +++ /dev/null @@ -1,18 +0,0 @@ -#include <linux/wait.h> - -/* - * Do not use. This is a replacement for the old - * "interruptible_sleep_on_timeout" function that has been - * deprecated for ages. All users should instead try to use - * wait_event_interruptible_timeout. - */ - -static inline long -oss_broken_sleep_on(wait_queue_head_t *q, long timeout) -{ - DEFINE_WAIT(wait); - prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE); - timeout = schedule_timeout(timeout); - finish_wait(q, &wait); - return timeout; -} diff --git a/sound/oss/sound_calls.h b/sound/oss/sound_calls.h deleted file mode 100644 index 87d8ad4a0340..000000000000 --- a/sound/oss/sound_calls.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * DMA buffer calls - */ - -int DMAbuf_open(int dev, int mode); -int DMAbuf_release(int dev, int mode); -int DMAbuf_getwrbuffer(int dev, char **buf, int *size, int dontblock); -int DMAbuf_getrdbuffer(int dev, char **buf, int *len, int dontblock); -int DMAbuf_rmchars(int dev, int buff_no, int c); -int DMAbuf_start_output(int dev, int buff_no, int l); -int DMAbuf_move_wrpointer(int dev, int l); -/* int DMAbuf_ioctl(int dev, unsigned int cmd, void __user *arg, int local); */ -void DMAbuf_init(int dev, int dma1, int dma2); -void DMAbuf_deinit(int dev); -int DMAbuf_start_dma (int dev, unsigned long physaddr, int count, int dma_mode); -void DMAbuf_inputintr(int dev); -void DMAbuf_outputintr(int dev, int underflow_flag); -struct dma_buffparms; -int DMAbuf_space_in_queue (int dev); -int DMAbuf_activate_recording (int dev, struct dma_buffparms *dmap); -int DMAbuf_get_buffer_pointer (int dev, struct dma_buffparms *dmap, int direction); -void DMAbuf_launch_output(int dev, struct dma_buffparms *dmap); -unsigned int DMAbuf_poll(struct file *file, int dev, poll_table *wait); -void DMAbuf_start_devices(unsigned int devmask); -void DMAbuf_reset (int dev); -int DMAbuf_sync (int dev); - -/* - * System calls for /dev/dsp and /dev/audio (audio.c) - */ - -int audio_read (int dev, struct file *file, char __user *buf, int count); -int audio_write (int dev, struct file *file, const char __user *buf, int count); -int audio_open (int dev, struct file *file); -void audio_release (int dev, struct file *file); -int audio_ioctl (int dev, struct file *file, - unsigned int cmd, void __user *arg); -void audio_init_devices (void); -void reorganize_buffers (int dev, struct dma_buffparms *dmap, int recording); - -/* - * System calls for the /dev/sequencer - */ - -int sequencer_read (int dev, struct file *file, char __user *buf, int count); -int sequencer_write (int dev, struct file *file, const char __user *buf, int count); -int sequencer_open (int dev, struct file *file); -void sequencer_release (int dev, struct file *file); -int sequencer_ioctl (int dev, struct file *file, unsigned int cmd, void __user *arg); -unsigned int sequencer_poll(int dev, struct file *file, poll_table * wait); - -void sequencer_init (void); -void sequencer_unload (void); -void sequencer_timer(unsigned long dummy); -int note_to_freq(int note_num); -unsigned long compute_finetune(unsigned long base_freq, int bend, int range, - int vibrato_bend); -void seq_input_event(unsigned char *event, int len); -void seq_copy_to_input (unsigned char *event, int len); - -/* - * System calls for the /dev/midi - */ - -int MIDIbuf_read (int dev, struct file *file, char __user *buf, int count); -int MIDIbuf_write (int dev, struct file *file, const char __user *buf, int count); -int MIDIbuf_open (int dev, struct file *file); -void MIDIbuf_release (int dev, struct file *file); -int MIDIbuf_ioctl (int dev, struct file *file, unsigned int cmd, void __user *arg); -unsigned int MIDIbuf_poll(int dev, struct file *file, poll_table * wait); -int MIDIbuf_avail(int dev); - -void MIDIbuf_bytes_received(int dev, unsigned char *buf, int count); - - -/* From soundcard.c */ -void request_sound_timer (int count); -void sound_stop_timer(void); -void conf_printf(char *name, struct address_info *hw_config); -void conf_printf2(char *name, int base, int irq, int dma, int dma2); - -/* From sound_timer.c */ -void sound_timer_interrupt(void); -void sound_timer_syncinterval(unsigned int new_usecs); - -/* From midi_synth.c */ -void do_midi_msg (int synthno, unsigned char *msg, int mlen); diff --git a/sound/oss/sound_config.h b/sound/oss/sound_config.h deleted file mode 100644 index 5253b0a70437..000000000000 --- a/sound/oss/sound_config.h +++ /dev/null @@ -1,144 +0,0 @@ -/* sound_config.h - * - * A driver for sound cards, misc. configuration parameters. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ - - -#ifndef _SOUND_CONFIG_H_ -#define _SOUND_CONFIG_H_ - -#include <linux/fs.h> -#include <linux/sound.h> -#include <linux/sched/signal.h> - -#include "os.h" -#include "soundvers.h" - - -#ifndef SND_DEFAULT_ENABLE -#define SND_DEFAULT_ENABLE 1 -#endif - -#ifndef MAX_REALTIME_FACTOR -#define MAX_REALTIME_FACTOR 4 -#endif - -/* - * Use always 64k buffer size. There is no reason to use shorter. - */ -#undef DSP_BUFFSIZE -#define DSP_BUFFSIZE (64*1024) - -#ifndef DSP_BUFFCOUNT -#define DSP_BUFFCOUNT 1 /* 1 is recommended. */ -#endif - -#define FM_MONO 0x388 /* This is the I/O address used by AdLib */ - -#ifndef CONFIG_PAS_BASE -#define CONFIG_PAS_BASE 0x388 -#endif - -/* SEQ_MAX_QUEUE is the maximum number of sequencer events buffered by the - driver. (There is no need to alter this) */ -#define SEQ_MAX_QUEUE 1024 - -#define SBFM_MAXINSTR (256) /* Size of the FM Instrument bank */ -/* 128 instruments for general MIDI setup and 16 unassigned */ - -#define SND_NDEVS 256 /* Number of supported devices */ - -#define DSP_DEFAULT_SPEED 8000 - -#define MAX_AUDIO_DEV 5 -#define MAX_MIXER_DEV 5 -#define MAX_SYNTH_DEV 5 -#define MAX_MIDI_DEV 6 -#define MAX_TIMER_DEV 4 - -struct address_info { - int io_base; - int irq; - int dma; - int dma2; - int always_detect; /* 1=Trust me, it's there */ - char *name; - int driver_use_1; /* Driver defined field 1 */ - int driver_use_2; /* Driver defined field 2 */ - int *osp; /* OS specific info */ - int card_subtype; /* Driver specific. Usually 0 */ - void *memptr; /* Module memory chainer */ - int slots[6]; /* To remember driver slot ids */ -}; - -#define SYNTH_MAX_VOICES 32 - -struct voice_alloc_info { - int max_voice; - int used_voices; - int ptr; /* For device specific use */ - unsigned short map[SYNTH_MAX_VOICES]; /* (ch << 8) | (note+1) */ - int timestamp; - int alloc_times[SYNTH_MAX_VOICES]; - }; - -struct channel_info { - int pgm_num; - int bender_value; - int bender_range; - unsigned char controllers[128]; - }; - -/* - * Process wakeup reasons - */ -#define WK_NONE 0x00 -#define WK_WAKEUP 0x01 -#define WK_TIMEOUT 0x02 -#define WK_SIGNAL 0x04 -#define WK_SLEEP 0x08 -#define WK_SELECT 0x10 -#define WK_ABORT 0x20 - -#define OPEN_READ PCM_ENABLE_INPUT -#define OPEN_WRITE PCM_ENABLE_OUTPUT -#define OPEN_READWRITE (OPEN_READ|OPEN_WRITE) - -static inline int translate_mode(struct file *file) -{ - if (OPEN_READ == (__force int)FMODE_READ && - OPEN_WRITE == (__force int)FMODE_WRITE) - return (__force int)(file->f_mode & (FMODE_READ | FMODE_WRITE)); - else - return ((file->f_mode & FMODE_READ) ? OPEN_READ : 0) | - ((file->f_mode & FMODE_WRITE) ? OPEN_WRITE : 0); -} - -#include "sound_calls.h" -#include "dev_table.h" - -#ifndef DDB -#define DDB(x) do {} while (0) -#endif - -#ifndef MDB -#ifdef MODULE -#define MDB(x) x -#else -#define MDB(x) -#endif -#endif - -#define TIMER_ARMED 121234 -#define TIMER_NOT_ARMED 1 - -#define MAX_MEM_BLOCKS 1024 - -#endif diff --git a/sound/oss/sound_firmware.h b/sound/oss/sound_firmware.h deleted file mode 100644 index 2be465277ba0..000000000000 --- a/sound/oss/sound_firmware.h +++ /dev/null @@ -1,29 +0,0 @@ -#include <linux/fs.h> - -/** - * mod_firmware_load - load sound driver firmware - * @fn: filename - * @fp: return for the buffer. - * - * Load the firmware for a sound module (up to 128K) into a buffer. - * The buffer is returned in *fp. It is allocated with vmalloc so is - * virtually linear and not DMAable. The caller should free it with - * vfree when finished. - * - * The length of the buffer is returned on a successful load, the - * value zero on a failure. - * - * Caution: This API is not recommended. Firmware should be loaded via - * request_firmware. - */ -static inline int mod_firmware_load(const char *fn, char **fp) -{ - loff_t size; - int err; - - err = kernel_read_file_from_path(fn, (void **)fp, &size, - 131072, READING_FIRMWARE); - if (err < 0) - return 0; - return size; -} diff --git a/sound/oss/sound_timer.c b/sound/oss/sound_timer.c deleted file mode 100644 index 3a444a6f10eb..000000000000 --- a/sound/oss/sound_timer.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * sound/oss/sound_timer.c - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - */ -#include <linux/string.h> -#include <linux/spinlock.h> - -#include "sound_config.h" - -static volatile int initialized, opened, tmr_running; -static volatile unsigned int tmr_offs, tmr_ctr; -static volatile unsigned long ticks_offs; -static volatile int curr_tempo, curr_timebase; -static volatile unsigned long curr_ticks; -static volatile unsigned long next_event_time; -static unsigned long prev_event_time; -static volatile unsigned long usecs_per_tmr; /* Length of the current interval */ - -static struct sound_lowlev_timer *tmr; -static DEFINE_SPINLOCK(lock); - -static unsigned long tmr2ticks(int tmr_value) -{ - /* - * Convert timer ticks to MIDI ticks - */ - - unsigned long tmp; - unsigned long scale; - - tmp = tmr_value * usecs_per_tmr; /* Convert to usecs */ - scale = (60 * 1000000) / (curr_tempo * curr_timebase); /* usecs per MIDI tick */ - return (tmp + (scale / 2)) / scale; -} - -void reprogram_timer(void) -{ - unsigned long usecs_per_tick; - - /* - * The user is changing the timer rate before setting a timer - * slap, bad bad not allowed. - */ - - if(!tmr) - return; - - usecs_per_tick = (60 * 1000000) / (curr_tempo * curr_timebase); - - /* - * Don't kill the system by setting too high timer rate - */ - if (usecs_per_tick < 2000) - usecs_per_tick = 2000; - - usecs_per_tmr = tmr->tmr_start(tmr->dev, usecs_per_tick); -} - -void sound_timer_syncinterval(unsigned int new_usecs) -{ - /* - * This routine is called by the hardware level if - * the clock frequency has changed for some reason. - */ - tmr_offs = tmr_ctr; - ticks_offs += tmr2ticks(tmr_ctr); - tmr_ctr = 0; - usecs_per_tmr = new_usecs; -} -EXPORT_SYMBOL(sound_timer_syncinterval); - -static void tmr_reset(void) -{ - unsigned long flags; - - spin_lock_irqsave(&lock,flags); - tmr_offs = 0; - ticks_offs = 0; - tmr_ctr = 0; - next_event_time = (unsigned long) -1; - prev_event_time = 0; - curr_ticks = 0; - spin_unlock_irqrestore(&lock,flags); -} - -static int timer_open(int dev, int mode) -{ - if (opened) - return -EBUSY; - tmr_reset(); - curr_tempo = 60; - curr_timebase = 100; - opened = 1; - reprogram_timer(); - return 0; -} - -static void timer_close(int dev) -{ - opened = tmr_running = 0; - tmr->tmr_disable(tmr->dev); -} - -static int timer_event(int dev, unsigned char *event) -{ - unsigned char cmd = event[1]; - unsigned long parm = *(int *) &event[4]; - - switch (cmd) - { - case TMR_WAIT_REL: - parm += prev_event_time; - case TMR_WAIT_ABS: - if (parm > 0) - { - long time; - - if (parm <= curr_ticks) /* It's the time */ - return TIMER_NOT_ARMED; - time = parm; - next_event_time = prev_event_time = time; - return TIMER_ARMED; - } - break; - - case TMR_START: - tmr_reset(); - tmr_running = 1; - reprogram_timer(); - break; - - case TMR_STOP: - tmr_running = 0; - break; - - case TMR_CONTINUE: - tmr_running = 1; - reprogram_timer(); - break; - - case TMR_TEMPO: - if (parm) - { - if (parm < 8) - parm = 8; - if (parm > 250) - parm = 250; - tmr_offs = tmr_ctr; - ticks_offs += tmr2ticks(tmr_ctr); - tmr_ctr = 0; - curr_tempo = parm; - reprogram_timer(); - } - break; - - case TMR_ECHO: - seq_copy_to_input(event, 8); - break; - - default:; - } - return TIMER_NOT_ARMED; -} - -static unsigned long timer_get_time(int dev) -{ - if (!opened) - return 0; - return curr_ticks; -} - -static int timer_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - int __user *p = arg; - int val; - - switch (cmd) - { - case SNDCTL_TMR_SOURCE: - val = TMR_INTERNAL; - break; - - case SNDCTL_TMR_START: - tmr_reset(); - tmr_running = 1; - return 0; - - case SNDCTL_TMR_STOP: - tmr_running = 0; - return 0; - - case SNDCTL_TMR_CONTINUE: - tmr_running = 1; - return 0; - - case SNDCTL_TMR_TIMEBASE: - if (get_user(val, p)) - return -EFAULT; - if (val) - { - if (val < 1) - val = 1; - if (val > 1000) - val = 1000; - curr_timebase = val; - } - val = curr_timebase; - break; - - case SNDCTL_TMR_TEMPO: - if (get_user(val, p)) - return -EFAULT; - if (val) - { - if (val < 8) - val = 8; - if (val > 250) - val = 250; - tmr_offs = tmr_ctr; - ticks_offs += tmr2ticks(tmr_ctr); - tmr_ctr = 0; - curr_tempo = val; - reprogram_timer(); - } - val = curr_tempo; - break; - - case SNDCTL_SEQ_CTRLRATE: - if (get_user(val, p)) - return -EFAULT; - if (val != 0) /* Can't change */ - return -EINVAL; - val = ((curr_tempo * curr_timebase) + 30) / 60; - break; - - case SNDCTL_SEQ_GETTIME: - val = curr_ticks; - break; - - case SNDCTL_TMR_METRONOME: - default: - return -EINVAL; - } - return put_user(val, p); -} - -static void timer_arm(int dev, long time) -{ - if (time < 0) - time = curr_ticks + 1; - else if (time <= curr_ticks) /* It's the time */ - return; - - next_event_time = prev_event_time = time; - return; -} - -static struct sound_timer_operations sound_timer = -{ - .owner = THIS_MODULE, - .info = {"Sound Timer", 0}, - .priority = 1, /* Priority */ - .devlink = 0, /* Local device link */ - .open = timer_open, - .close = timer_close, - .event = timer_event, - .get_time = timer_get_time, - .ioctl = timer_ioctl, - .arm_timer = timer_arm -}; - -void sound_timer_interrupt(void) -{ - unsigned long flags; - - if (!opened) - return; - - tmr->tmr_restart(tmr->dev); - - if (!tmr_running) - return; - - spin_lock_irqsave(&lock,flags); - tmr_ctr++; - curr_ticks = ticks_offs + tmr2ticks(tmr_ctr); - - if (curr_ticks >= next_event_time) - { - next_event_time = (unsigned long) -1; - sequencer_timer(0); - } - spin_unlock_irqrestore(&lock,flags); -} -EXPORT_SYMBOL(sound_timer_interrupt); - -void sound_timer_init(struct sound_lowlev_timer *t, char *name) -{ - int n; - - if (initialized) - { - if (t->priority <= tmr->priority) - return; /* There is already a similar or better timer */ - tmr = t; - return; - } - initialized = 1; - tmr = t; - - n = sound_alloc_timerdev(); - if (n == -1) - n = 0; /* Overwrite the system timer */ - strlcpy(sound_timer.info.name, name, sizeof(sound_timer.info.name)); - sound_timer_devs[n] = &sound_timer; -} -EXPORT_SYMBOL(sound_timer_init); - diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c deleted file mode 100644 index b70c7c8f9c5d..000000000000 --- a/sound/oss/soundcard.c +++ /dev/null @@ -1,733 +0,0 @@ -/* - * linux/sound/oss/soundcard.c - * - * Sound card driver for Linux - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * integrated sound_switch.c - * Stefan Reinauer : integrated /proc/sound (equals to /dev/sndstat, - * which should disappear in the near future) - * Eric Dumas : devfs support (22-Jan-98) <dumas@linux.eu.org> with - * fixups by C. Scott Ananian <cananian@alumni.princeton.edu> - * Richard Gooch : moved common (non OSS-specific) devices to sound_core.c - * Rob Riggs : Added persistent DMA buffers support (1998/10/17) - * Christoph Hellwig : Some cleanup work (2000/03/01) - */ - - -#include "sound_config.h" -#include <linux/init.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/fcntl.h> -#include <linux/ctype.h> -#include <linux/stddef.h> -#include <linux/kmod.h> -#include <linux/kernel.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <linux/wait.h> -#include <linux/ioport.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/mutex.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/device.h> - -/* - * This ought to be moved into include/asm/dma.h - */ -#ifndef valid_dma -#define valid_dma(n) ((n) >= 0 && (n) < MAX_DMA_CHANNELS && (n) != 4) -#endif - -/* - * Table for permanently allocated memory (used when unloading the module) - */ -void * sound_mem_blocks[MAX_MEM_BLOCKS]; -static DEFINE_MUTEX(soundcard_mutex); -int sound_nblocks = 0; - -/* Persistent DMA buffers */ -#ifdef CONFIG_SOUND_DMAP -int sound_dmap_flag = 1; -#else -int sound_dmap_flag = 0; -#endif - -static char dma_alloc_map[MAX_DMA_CHANNELS]; - -#define DMA_MAP_UNAVAIL 0 -#define DMA_MAP_FREE 1 -#define DMA_MAP_BUSY 2 - - -unsigned long seq_time = 0; /* Time for /dev/sequencer */ -extern struct class *sound_class; - -/* - * Table for configurable mixer volume handling - */ -static mixer_vol_table mixer_vols[MAX_MIXER_DEV]; -static int num_mixer_volumes; - -int *load_mixer_volumes(char *name, int *levels, int present) -{ - int i, n; - - for (i = 0; i < num_mixer_volumes; i++) { - if (strncmp(name, mixer_vols[i].name, 32) == 0) { - if (present) - mixer_vols[i].num = i; - return mixer_vols[i].levels; - } - } - if (num_mixer_volumes >= MAX_MIXER_DEV) { - printk(KERN_ERR "Sound: Too many mixers (%s)\n", name); - return levels; - } - n = num_mixer_volumes++; - - strncpy(mixer_vols[n].name, name, 32); - - if (present) - mixer_vols[n].num = n; - else - mixer_vols[n].num = -1; - - for (i = 0; i < 32; i++) - mixer_vols[n].levels[i] = levels[i]; - return mixer_vols[n].levels; -} -EXPORT_SYMBOL(load_mixer_volumes); - -static int set_mixer_levels(void __user * arg) -{ - /* mixer_vol_table is 174 bytes, so IMHO no reason to not allocate it on the stack */ - mixer_vol_table buf; - - if (__copy_from_user(&buf, arg, sizeof(buf))) - return -EFAULT; - load_mixer_volumes(buf.name, buf.levels, 0); - if (__copy_to_user(arg, &buf, sizeof(buf))) - return -EFAULT; - return 0; -} - -static int get_mixer_levels(void __user * arg) -{ - int n; - - if (__get_user(n, (int __user *)(&(((mixer_vol_table __user *)arg)->num)))) - return -EFAULT; - if (n < 0 || n >= num_mixer_volumes) - return -EINVAL; - if (__copy_to_user(arg, &mixer_vols[n], sizeof(mixer_vol_table))) - return -EFAULT; - return 0; -} - -/* 4K page size but our output routines use some slack for overruns */ -#define PROC_BLOCK_SIZE (3*1024) - -static ssize_t sound_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) -{ - int dev = iminor(file_inode(file)); - int ret = -EINVAL; - - /* - * The OSS drivers aren't remotely happy without this locking, - * and unless someone fixes them when they are about to bite the - * big one anyway, we might as well bandage here.. - */ - - mutex_lock(&soundcard_mutex); - - switch (dev & 0x0f) { - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - ret = audio_read(dev, file, buf, count); - break; - - case SND_DEV_SEQ: - case SND_DEV_SEQ2: - ret = sequencer_read(dev, file, buf, count); - break; - - case SND_DEV_MIDIN: - ret = MIDIbuf_read(dev, file, buf, count); - } - mutex_unlock(&soundcard_mutex); - return ret; -} - -static ssize_t sound_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) -{ - int dev = iminor(file_inode(file)); - int ret = -EINVAL; - - mutex_lock(&soundcard_mutex); - switch (dev & 0x0f) { - case SND_DEV_SEQ: - case SND_DEV_SEQ2: - ret = sequencer_write(dev, file, buf, count); - break; - - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - ret = audio_write(dev, file, buf, count); - break; - - case SND_DEV_MIDIN: - ret = MIDIbuf_write(dev, file, buf, count); - break; - } - mutex_unlock(&soundcard_mutex); - return ret; -} - -static int sound_open(struct inode *inode, struct file *file) -{ - int dev = iminor(inode); - int retval; - - if ((dev >= SND_NDEVS) || (dev < 0)) { - printk(KERN_ERR "Invalid minor device %d\n", dev); - return -ENXIO; - } - mutex_lock(&soundcard_mutex); - switch (dev & 0x0f) { - case SND_DEV_CTL: - dev >>= 4; - if (dev >= 0 && dev < MAX_MIXER_DEV && mixer_devs[dev] == NULL) { - request_module("mixer%d", dev); - } - retval = -ENXIO; - if (dev && (dev >= num_mixers || mixer_devs[dev] == NULL)) - break; - - if (!try_module_get(mixer_devs[dev]->owner)) - break; - - retval = 0; - break; - - case SND_DEV_SEQ: - case SND_DEV_SEQ2: - retval = sequencer_open(dev, file); - break; - - case SND_DEV_MIDIN: - retval = MIDIbuf_open(dev, file); - break; - - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - retval = audio_open(dev, file); - break; - - default: - printk(KERN_ERR "Invalid minor device %d\n", dev); - retval = -ENXIO; - } - - mutex_unlock(&soundcard_mutex); - return retval; -} - -static int sound_release(struct inode *inode, struct file *file) -{ - int dev = iminor(inode); - - mutex_lock(&soundcard_mutex); - switch (dev & 0x0f) { - case SND_DEV_CTL: - module_put(mixer_devs[dev >> 4]->owner); - break; - - case SND_DEV_SEQ: - case SND_DEV_SEQ2: - sequencer_release(dev, file); - break; - - case SND_DEV_MIDIN: - MIDIbuf_release(dev, file); - break; - - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - audio_release(dev, file); - break; - - default: - printk(KERN_ERR "Sound error: Releasing unknown device 0x%02x\n", dev); - } - mutex_unlock(&soundcard_mutex); - - return 0; -} - -static int get_mixer_info(int dev, void __user *arg) -{ - mixer_info info; - memset(&info, 0, sizeof(info)); - strlcpy(info.id, mixer_devs[dev]->id, sizeof(info.id)); - strlcpy(info.name, mixer_devs[dev]->name, sizeof(info.name)); - info.modify_counter = mixer_devs[dev]->modify_counter; - if (__copy_to_user(arg, &info, sizeof(info))) - return -EFAULT; - return 0; -} - -static int get_old_mixer_info(int dev, void __user *arg) -{ - _old_mixer_info info; - memset(&info, 0, sizeof(info)); - strlcpy(info.id, mixer_devs[dev]->id, sizeof(info.id)); - strlcpy(info.name, mixer_devs[dev]->name, sizeof(info.name)); - if (copy_to_user(arg, &info, sizeof(info))) - return -EFAULT; - return 0; -} - -static int sound_mixer_ioctl(int mixdev, unsigned int cmd, void __user *arg) -{ - if (mixdev < 0 || mixdev >= MAX_MIXER_DEV) - return -ENXIO; - /* Try to load the mixer... */ - if (mixer_devs[mixdev] == NULL) { - request_module("mixer%d", mixdev); - } - if (mixdev >= num_mixers || !mixer_devs[mixdev]) - return -ENXIO; - if (cmd == SOUND_MIXER_INFO) - return get_mixer_info(mixdev, arg); - if (cmd == SOUND_OLD_MIXER_INFO) - return get_old_mixer_info(mixdev, arg); - if (_SIOC_DIR(cmd) & _SIOC_WRITE) - mixer_devs[mixdev]->modify_counter++; - if (!mixer_devs[mixdev]->ioctl) - return -EINVAL; - return mixer_devs[mixdev]->ioctl(mixdev, cmd, arg); -} - -static long sound_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int len = 0, dtype; - int dev = iminor(file_inode(file)); - long ret = -EINVAL; - void __user *p = (void __user *)arg; - - if (_SIOC_DIR(cmd) != _SIOC_NONE && _SIOC_DIR(cmd) != 0) { - /* - * Have to validate the address given by the process. - */ - len = _SIOC_SIZE(cmd); - if (len < 1 || len > 65536 || !p) - return -EFAULT; - if (_SIOC_DIR(cmd) & _SIOC_WRITE) - if (!access_ok(VERIFY_READ, p, len)) - return -EFAULT; - if (_SIOC_DIR(cmd) & _SIOC_READ) - if (!access_ok(VERIFY_WRITE, p, len)) - return -EFAULT; - } - if (cmd == OSS_GETVERSION) - return __put_user(SOUND_VERSION, (int __user *)p); - - mutex_lock(&soundcard_mutex); - if (_IOC_TYPE(cmd) == 'M' && num_mixers > 0 && /* Mixer ioctl */ - (dev & 0x0f) != SND_DEV_CTL) { - dtype = dev & 0x0f; - switch (dtype) { - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - ret = sound_mixer_ioctl(audio_devs[dev >> 4]->mixer_dev, - cmd, p); - break; - default: - ret = sound_mixer_ioctl(dev >> 4, cmd, p); - break; - } - mutex_unlock(&soundcard_mutex); - return ret; - } - - switch (dev & 0x0f) { - case SND_DEV_CTL: - if (cmd == SOUND_MIXER_GETLEVELS) - ret = get_mixer_levels(p); - else if (cmd == SOUND_MIXER_SETLEVELS) - ret = set_mixer_levels(p); - else - ret = sound_mixer_ioctl(dev >> 4, cmd, p); - break; - - case SND_DEV_SEQ: - case SND_DEV_SEQ2: - ret = sequencer_ioctl(dev, file, cmd, p); - break; - - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - ret = audio_ioctl(dev, file, cmd, p); - break; - - case SND_DEV_MIDIN: - ret = MIDIbuf_ioctl(dev, file, cmd, p); - break; - - } - mutex_unlock(&soundcard_mutex); - return ret; -} - -static unsigned int sound_poll(struct file *file, poll_table * wait) -{ - struct inode *inode = file_inode(file); - int dev = iminor(inode); - - switch (dev & 0x0f) { - case SND_DEV_SEQ: - case SND_DEV_SEQ2: - return sequencer_poll(dev, file, wait); - - case SND_DEV_MIDIN: - return MIDIbuf_poll(dev, file, wait); - - case SND_DEV_DSP: - case SND_DEV_DSP16: - case SND_DEV_AUDIO: - return DMAbuf_poll(file, dev >> 4, wait); - } - return 0; -} - -static int sound_mmap(struct file *file, struct vm_area_struct *vma) -{ - int dev_class; - unsigned long size; - struct dma_buffparms *dmap = NULL; - int dev = iminor(file_inode(file)); - - dev_class = dev & 0x0f; - dev >>= 4; - - if (dev_class != SND_DEV_DSP && dev_class != SND_DEV_DSP16 && dev_class != SND_DEV_AUDIO) { - printk(KERN_ERR "Sound: mmap() not supported for other than audio devices\n"); - return -EINVAL; - } - mutex_lock(&soundcard_mutex); - if (vma->vm_flags & VM_WRITE) /* Map write and read/write to the output buf */ - dmap = audio_devs[dev]->dmap_out; - else if (vma->vm_flags & VM_READ) - dmap = audio_devs[dev]->dmap_in; - else { - printk(KERN_ERR "Sound: Undefined mmap() access\n"); - mutex_unlock(&soundcard_mutex); - return -EINVAL; - } - - if (dmap == NULL) { - printk(KERN_ERR "Sound: mmap() error. dmap == NULL\n"); - mutex_unlock(&soundcard_mutex); - return -EIO; - } - if (dmap->raw_buf == NULL) { - printk(KERN_ERR "Sound: mmap() called when raw_buf == NULL\n"); - mutex_unlock(&soundcard_mutex); - return -EIO; - } - if (dmap->mapping_flags) { - printk(KERN_ERR "Sound: mmap() called twice for the same DMA buffer\n"); - mutex_unlock(&soundcard_mutex); - return -EIO; - } - if (vma->vm_pgoff != 0) { - printk(KERN_ERR "Sound: mmap() offset must be 0.\n"); - mutex_unlock(&soundcard_mutex); - return -EINVAL; - } - size = vma->vm_end - vma->vm_start; - - if (size != dmap->bytes_in_use) { - printk(KERN_WARNING "Sound: mmap() size = %ld. Should be %d\n", size, dmap->bytes_in_use); - } - if (remap_pfn_range(vma, vma->vm_start, - virt_to_phys(dmap->raw_buf) >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot)) { - mutex_unlock(&soundcard_mutex); - return -EAGAIN; - } - - dmap->mapping_flags |= DMA_MAP_MAPPED; - - if( audio_devs[dev]->d->mmap) - audio_devs[dev]->d->mmap(dev); - - memset(dmap->raw_buf, - dmap->neutral_byte, - dmap->bytes_in_use); - mutex_unlock(&soundcard_mutex); - return 0; -} - -const struct file_operations oss_sound_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = sound_read, - .write = sound_write, - .poll = sound_poll, - .unlocked_ioctl = sound_ioctl, - .mmap = sound_mmap, - .open = sound_open, - .release = sound_release, -}; - -/* - * Create the required special subdevices - */ - -static int create_special_devices(void) -{ - int seq1,seq2; - seq1=register_sound_special(&oss_sound_fops, 1); - if(seq1==-1) - goto bad; - seq2=register_sound_special(&oss_sound_fops, 8); - if(seq2!=-1) - return 0; - unregister_sound_special(1); -bad: - return -1; -} - - -static int dmabuf; -static int dmabug; - -module_param(dmabuf, int, 0444); -module_param(dmabug, int, 0444); - -/* additional minors for compatibility */ -struct oss_minor_dev { - unsigned short minor; - unsigned int enabled; -} dev_list[] = { - { SND_DEV_DSP16 }, - { SND_DEV_AUDIO }, -}; - -static int __init oss_init(void) -{ - int err; - int i, j; - -#ifdef CONFIG_PCI - if(dmabug) - isa_dma_bridge_buggy = dmabug; -#endif - - err = create_special_devices(); - if (err) { - printk(KERN_ERR "sound: driver already loaded/included in kernel\n"); - return err; - } - - /* Protecting the innocent */ - sound_dmap_flag = (dmabuf > 0 ? 1 : 0); - - for (i = 0; i < ARRAY_SIZE(dev_list); i++) { - j = 0; - do { - unsigned short minor = dev_list[i].minor + j * 0x10; - if (!register_sound_special(&oss_sound_fops, minor)) - dev_list[i].enabled = (1 << j); - } while (++j < num_audiodevs); - } - - if (sound_nblocks >= MAX_MEM_BLOCKS - 1) - printk(KERN_ERR "Sound warning: Deallocation table was too small.\n"); - - return 0; -} - -static void __exit oss_cleanup(void) -{ - int i, j; - - for (i = 0; i < ARRAY_SIZE(dev_list); i++) { - j = 0; - do { - if (dev_list[i].enabled & (1 << j)) - unregister_sound_special(dev_list[i].minor); - } while (++j < num_audiodevs); - } - - unregister_sound_special(1); - unregister_sound_special(8); - - sound_stop_timer(); - - sequencer_unload(); - - for (i = 0; i < MAX_DMA_CHANNELS; i++) - if (dma_alloc_map[i] != DMA_MAP_UNAVAIL) { - printk(KERN_ERR "Sound: Hmm, DMA%d was left allocated - fixed\n", i); - sound_free_dma(i); - } - - for (i = 0; i < sound_nblocks; i++) - vfree(sound_mem_blocks[i]); - -} - -module_init(oss_init); -module_exit(oss_cleanup); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("OSS Sound subsystem"); -MODULE_AUTHOR("Hannu Savolainen, et al."); - - -int sound_alloc_dma(int chn, char *deviceID) -{ - int err; - - if ((err = request_dma(chn, deviceID)) != 0) - return err; - - dma_alloc_map[chn] = DMA_MAP_FREE; - - return 0; -} -EXPORT_SYMBOL(sound_alloc_dma); - -int sound_open_dma(int chn, char *deviceID) -{ - if (!valid_dma(chn)) { - printk(KERN_ERR "sound_open_dma: Invalid DMA channel %d\n", chn); - return 1; - } - - if (dma_alloc_map[chn] != DMA_MAP_FREE) { - printk("sound_open_dma: DMA channel %d busy or not allocated (%d)\n", chn, dma_alloc_map[chn]); - return 1; - } - dma_alloc_map[chn] = DMA_MAP_BUSY; - return 0; -} -EXPORT_SYMBOL(sound_open_dma); - -void sound_free_dma(int chn) -{ - if (dma_alloc_map[chn] == DMA_MAP_UNAVAIL) { - /* printk( "sound_free_dma: Bad access to DMA channel %d\n", chn); */ - return; - } - free_dma(chn); - dma_alloc_map[chn] = DMA_MAP_UNAVAIL; -} -EXPORT_SYMBOL(sound_free_dma); - -void sound_close_dma(int chn) -{ - if (dma_alloc_map[chn] != DMA_MAP_BUSY) { - printk(KERN_ERR "sound_close_dma: Bad access to DMA channel %d\n", chn); - return; - } - dma_alloc_map[chn] = DMA_MAP_FREE; -} -EXPORT_SYMBOL(sound_close_dma); - -static void do_sequencer_timer(unsigned long dummy) -{ - sequencer_timer(0); -} - - -static DEFINE_TIMER(seq_timer, do_sequencer_timer, 0, 0); - -void request_sound_timer(int count) -{ - extern unsigned long seq_time; - - if (count < 0) { - seq_timer.expires = (-count) + jiffies; - add_timer(&seq_timer); - return; - } - count += seq_time; - - count -= jiffies; - - if (count < 1) - count = 1; - - seq_timer.expires = (count) + jiffies; - add_timer(&seq_timer); -} - -void sound_stop_timer(void) -{ - del_timer(&seq_timer); -} - -void conf_printf(char *name, struct address_info *hw_config) -{ -#ifndef CONFIG_SOUND_TRACEINIT - return; -#else - printk("<%s> at 0x%03x", name, hw_config->io_base); - - if (hw_config->irq) - printk(" irq %d", (hw_config->irq > 0) ? hw_config->irq : -hw_config->irq); - - if (hw_config->dma != -1 || hw_config->dma2 != -1) - { - printk(" dma %d", hw_config->dma); - if (hw_config->dma2 != -1) - printk(",%d", hw_config->dma2); - } - printk("\n"); -#endif -} -EXPORT_SYMBOL(conf_printf); - -void conf_printf2(char *name, int base, int irq, int dma, int dma2) -{ -#ifndef CONFIG_SOUND_TRACEINIT - return; -#else - printk("<%s> at 0x%03x", name, base); - - if (irq) - printk(" irq %d", (irq > 0) ? irq : -irq); - - if (dma != -1 || dma2 != -1) - { - printk(" dma %d", dma); - if (dma2 != -1) - printk(",%d", dma2); - } - printk("\n"); -#endif -} -EXPORT_SYMBOL(conf_printf2); - diff --git a/sound/oss/soundvers.h b/sound/oss/soundvers.h deleted file mode 100644 index e9084d2f46a9..000000000000 --- a/sound/oss/soundvers.h +++ /dev/null @@ -1,2 +0,0 @@ -#define SOUND_VERSION_STRING "3.8s2++-971130" -#define SOUND_INTERNAL_VERSION 0x030804 diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c deleted file mode 100644 index 97899352b15f..000000000000 --- a/sound/oss/swarm_cs4297a.c +++ /dev/null @@ -1,2781 +0,0 @@ -/******************************************************************************* -* -* "swarm_cs4297a.c" -- Cirrus Logic-Crystal CS4297a linux audio driver. -* -* Copyright (C) 2001 Broadcom Corporation. -* Copyright (C) 2000,2001 Cirrus Logic Corp. -* -- adapted from drivers by Thomas Sailer, -* -- but don't bug him; Problems should go to: -* -- tom woller (twoller@crystal.cirrus.com) or -* (audio@crystal.cirrus.com). -* -- adapted from cs4281 PCI driver for cs4297a on -* BCM1250 Synchronous Serial interface -* (Kip Walker, Broadcom Corp.) -* Copyright (C) 2004 Maciej W. Rozycki -* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -* -* Module command line parameters: -* none -* -* Supported devices: -* /dev/dsp standard /dev/dsp device, (mostly) OSS compatible -* /dev/mixer standard /dev/mixer device, (mostly) OSS compatible -* /dev/midi simple MIDI UART interface, no ioctl -* -* Modification History -* 08/20/00 trw - silence and no stopping DAC until release -* 08/23/00 trw - added CS_DBG statements, fix interrupt hang issue on DAC stop. -* 09/18/00 trw - added 16bit only record with conversion -* 09/24/00 trw - added Enhanced Full duplex (separate simultaneous -* capture/playback rates) -* 10/03/00 trw - fixed mmap (fixed GRECORD and the XMMS mmap test plugin -* libOSSm.so) -* 10/11/00 trw - modified for 2.4.0-test9 kernel enhancements (NR_MAP removal) -* 11/03/00 trw - fixed interrupt loss/stutter, added debug. -* 11/10/00 bkz - added __devinit to cs4297a_hw_init() -* 11/10/00 trw - fixed SMP and capture spinlock hang. -* 12/04/00 trw - cleaned up CSDEBUG flags and added "defaultorder" moduleparm. -* 12/05/00 trw - fixed polling (myth2), and added underrun swptr fix. -* 12/08/00 trw - added PM support. -* 12/14/00 trw - added wrapper code, builds under 2.4.0, 2.2.17-20, 2.2.17-8 -* (RH/Dell base), 2.2.18, 2.2.12. cleaned up code mods by ident. -* 12/19/00 trw - added PM support for 2.2 base (apm_callback). other PM cleanup. -* 12/21/00 trw - added fractional "defaultorder" inputs. if >100 then use -* defaultorder-100 as power of 2 for the buffer size. example: -* 106 = 2^(106-100) = 2^6 = 64 bytes for the buffer size. -* -*******************************************************************************/ - -#include <linux/list.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/sched/signal.h> -#include <linux/delay.h> -#include <linux/sound.h> -#include <linux/slab.h> -#include <linux/soundcard.h> -#include <linux/pci.h> -#include <linux/bitops.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/mutex.h> -#include <linux/kernel.h> - -#include <asm/byteorder.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <linux/uaccess.h> - -#include <asm/sibyte/sb1250_regs.h> -#include <asm/sibyte/sb1250_int.h> -#include <asm/sibyte/sb1250_dma.h> -#include <asm/sibyte/sb1250_scd.h> -#include <asm/sibyte/sb1250_syncser.h> -#include <asm/sibyte/sb1250_mac.h> -#include <asm/sibyte/sb1250.h> - -#include "sleep.h" - -struct cs4297a_state; - -static DEFINE_MUTEX(swarm_cs4297a_mutex); -static void stop_dac(struct cs4297a_state *s); -static void stop_adc(struct cs4297a_state *s); -static void start_dac(struct cs4297a_state *s); -static void start_adc(struct cs4297a_state *s); -#undef OSS_DOCUMENTED_MIXER_SEMANTICS - -// --------------------------------------------------------------------- - -#define CS4297a_MAGIC 0xf00beef1 - -// buffer order determines the size of the dma buffer for the driver. -// under Linux, a smaller buffer allows more responsiveness from many of the -// applications (e.g. games). A larger buffer allows some of the apps (esound) -// to not underrun the dma buffer as easily. As default, use 32k (order=3) -// rather than 64k as some of the games work more responsively. -// log base 2( buff sz = 32k). - -// -// Turn on/off debugging compilation by commenting out "#define CSDEBUG" -// -#define CSDEBUG 0 -#if CSDEBUG -#define CSDEBUG_INTERFACE 1 -#else -#undef CSDEBUG_INTERFACE -#endif -// -// cs_debugmask areas -// -#define CS_INIT 0x00000001 // initialization and probe functions -#define CS_ERROR 0x00000002 // tmp debugging bit placeholder -#define CS_INTERRUPT 0x00000004 // interrupt handler (separate from all other) -#define CS_FUNCTION 0x00000008 // enter/leave functions -#define CS_WAVE_WRITE 0x00000010 // write information for wave -#define CS_WAVE_READ 0x00000020 // read information for wave -#define CS_AC97 0x00000040 // AC97 register access -#define CS_DESCR 0x00000080 // descriptor management -#define CS_OPEN 0x00000400 // all open functions in the driver -#define CS_RELEASE 0x00000800 // all release functions in the driver -#define CS_PARMS 0x00001000 // functional and operational parameters -#define CS_IOCTL 0x00002000 // ioctl (non-mixer) -#define CS_TMP 0x10000000 // tmp debug mask bit - -// -// CSDEBUG is usual mode is set to 1, then use the -// cs_debuglevel and cs_debugmask to turn on or off debugging. -// Debug level of 1 has been defined to be kernel errors and info -// that should be printed on any released driver. -// -#if CSDEBUG -#define CS_DBGOUT(mask,level,x) if((cs_debuglevel >= (level)) && ((mask) & cs_debugmask) ) {x;} -#else -#define CS_DBGOUT(mask,level,x) -#endif - -#if CSDEBUG -static unsigned long cs_debuglevel = 4; // levels range from 1-9 -static unsigned long cs_debugmask = CS_INIT /*| CS_IOCTL*/; -module_param(cs_debuglevel, int, 0); -module_param(cs_debugmask, int, 0); -#endif -#define CS_TRUE 1 -#define CS_FALSE 0 - -#define CS_TYPE_ADC 0 -#define CS_TYPE_DAC 1 - -#define SER_BASE (A_SER_BASE_1 + KSEG1) -#define SS_CSR(t) (SER_BASE+t) -#define SS_TXTBL(t) (SER_BASE+R_SER_TX_TABLE_BASE+(t*8)) -#define SS_RXTBL(t) (SER_BASE+R_SER_RX_TABLE_BASE+(t*8)) - -#define FRAME_BYTES 32 -#define FRAME_SAMPLE_BYTES 4 - -/* Should this be variable? */ -#define SAMPLE_BUF_SIZE (16*1024) -#define SAMPLE_FRAME_COUNT (SAMPLE_BUF_SIZE / FRAME_SAMPLE_BYTES) -/* The driver can explode/shrink the frames to/from a smaller sample - buffer */ -#define DMA_BLOAT_FACTOR 1 -#define DMA_DESCR (SAMPLE_FRAME_COUNT / DMA_BLOAT_FACTOR) -#define DMA_BUF_SIZE (DMA_DESCR * FRAME_BYTES) - -/* Use the maxmium count (255 == 5.1 ms between interrupts) */ -#define DMA_INT_CNT ((1 << S_DMA_INT_PKTCNT) - 1) - -/* Figure this out: how many TX DMAs ahead to schedule a reg access */ -#define REG_LATENCY 150 - -#define FRAME_TX_US 20 - -#define SERDMA_NEXTBUF(d,f) (((d)->f+1) % (d)->ringsz) - -static const char invalid_magic[] = - KERN_CRIT "cs4297a: invalid magic value\n"; - -#define VALIDATE_STATE(s) \ -({ \ - if (!(s) || (s)->magic != CS4297a_MAGIC) { \ - printk(invalid_magic); \ - return -ENXIO; \ - } \ -}) - -/* AC97 registers */ -#define AC97_MASTER_VOL_STEREO 0x0002 /* Line Out */ -#define AC97_PCBEEP_VOL 0x000a /* none */ -#define AC97_PHONE_VOL 0x000c /* TAD Input (mono) */ -#define AC97_MIC_VOL 0x000e /* MIC Input (mono) */ -#define AC97_LINEIN_VOL 0x0010 /* Line Input (stereo) */ -#define AC97_CD_VOL 0x0012 /* CD Input (stereo) */ -#define AC97_AUX_VOL 0x0016 /* Aux Input (stereo) */ -#define AC97_PCMOUT_VOL 0x0018 /* Wave Output (stereo) */ -#define AC97_RECORD_SELECT 0x001a /* */ -#define AC97_RECORD_GAIN 0x001c -#define AC97_GENERAL_PURPOSE 0x0020 -#define AC97_3D_CONTROL 0x0022 -#define AC97_POWER_CONTROL 0x0026 -#define AC97_VENDOR_ID1 0x007c - -struct list_head cs4297a_devs = { &cs4297a_devs, &cs4297a_devs }; - -typedef struct serdma_descr_s { - u64 descr_a; - u64 descr_b; -} serdma_descr_t; - -typedef unsigned long paddr_t; - -typedef struct serdma_s { - unsigned ringsz; - serdma_descr_t *descrtab; - serdma_descr_t *descrtab_end; - paddr_t descrtab_phys; - - serdma_descr_t *descr_add; - serdma_descr_t *descr_rem; - - u64 *dma_buf; // buffer for DMA contents (frames) - paddr_t dma_buf_phys; - u16 *sample_buf; // tmp buffer for sample conversions - u16 *sb_swptr; - u16 *sb_hwptr; - u16 *sb_end; - - dma_addr_t dmaaddr; -// unsigned buforder; // Log base 2 of 'dma_buf' size in bytes.. - unsigned numfrag; // # of 'fragments' in the buffer. - unsigned fragshift; // Log base 2 of fragment size. - unsigned hwptr, swptr; - unsigned total_bytes; // # bytes process since open. - unsigned blocks; // last returned blocks value GETOPTR - unsigned wakeup; // interrupt occurred on block - int count; - unsigned underrun; // underrun flag - unsigned error; // over/underrun - wait_queue_head_t wait; - wait_queue_head_t reg_wait; - // redundant, but makes calculations easier - unsigned fragsize; // 2**fragshift.. - unsigned sbufsz; // 2**buforder. - unsigned fragsamples; - // OSS stuff - unsigned mapped:1; // Buffer mapped in cs4297a_mmap()? - unsigned ready:1; // prog_dmabuf_dac()/adc() successful? - unsigned endcleared:1; - unsigned type:1; // adc or dac buffer (CS_TYPE_XXX) - unsigned ossfragshift; - int ossmaxfrags; - unsigned subdivision; -} serdma_t; - -struct cs4297a_state { - // magic - unsigned int magic; - - struct list_head list; - - // soundcore stuff - int dev_audio; - int dev_mixer; - - // hardware resources - unsigned int irq; - - struct { - unsigned int rx_ovrrn; /* FIFO */ - unsigned int rx_overflow; /* staging buffer */ - unsigned int tx_underrun; - unsigned int rx_bad; - unsigned int rx_good; - } stats; - - // mixer registers - struct { - unsigned short vol[10]; - unsigned int recsrc; - unsigned int modcnt; - unsigned short micpreamp; - } mix; - - // wave stuff - struct properties { - unsigned fmt; - unsigned fmt_original; // original requested format - unsigned channels; - unsigned rate; - } prop_dac, prop_adc; - unsigned conversion:1; // conversion from 16 to 8 bit in progress - unsigned ena; - spinlock_t lock; - struct mutex open_mutex; - struct mutex open_sem_adc; - struct mutex open_sem_dac; - fmode_t open_mode; - wait_queue_head_t open_wait; - wait_queue_head_t open_wait_adc; - wait_queue_head_t open_wait_dac; - - dma_addr_t dmaaddr_sample_buf; - unsigned buforder_sample_buf; // Log base 2 of 'dma_buf' size in bytes.. - - serdma_t dma_dac, dma_adc; - - volatile u16 read_value; - volatile u16 read_reg; - volatile u64 reg_request; -}; - -#if 1 -#define prog_codec(a,b) -#define dealloc_dmabuf(a,b); -#endif - -static int prog_dmabuf_adc(struct cs4297a_state *s) -{ - s->dma_adc.ready = 1; - return 0; -} - - -static int prog_dmabuf_dac(struct cs4297a_state *s) -{ - s->dma_dac.ready = 1; - return 0; -} - -static void clear_advance(void *buf, unsigned bsize, unsigned bptr, - unsigned len, unsigned char c) -{ - if (bptr + len > bsize) { - unsigned x = bsize - bptr; - memset(((char *) buf) + bptr, c, x); - bptr = 0; - len -= x; - } - CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO - "cs4297a: clear_advance(): memset %d at 0x%.8x for %d size \n", - (unsigned)c, (unsigned)((char *) buf) + bptr, len)); - memset(((char *) buf) + bptr, c, len); -} - -#if CSDEBUG - -// DEBUG ROUTINES - -#define SOUND_MIXER_CS_GETDBGLEVEL _SIOWR('M',120, int) -#define SOUND_MIXER_CS_SETDBGLEVEL _SIOWR('M',121, int) -#define SOUND_MIXER_CS_GETDBGMASK _SIOWR('M',122, int) -#define SOUND_MIXER_CS_SETDBGMASK _SIOWR('M',123, int) - -static void cs_printioctl(unsigned int x) -{ - unsigned int i; - unsigned char vidx; - // Index of mixtable1[] member is Device ID - // and must be <= SOUND_MIXER_NRDEVICES. - // Value of array member is index into s->mix.vol[] - static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = { - [SOUND_MIXER_PCM] = 1, // voice - [SOUND_MIXER_LINE1] = 2, // AUX - [SOUND_MIXER_CD] = 3, // CD - [SOUND_MIXER_LINE] = 4, // Line - [SOUND_MIXER_SYNTH] = 5, // FM - [SOUND_MIXER_MIC] = 6, // Mic - [SOUND_MIXER_SPEAKER] = 7, // Speaker - [SOUND_MIXER_RECLEV] = 8, // Recording level - [SOUND_MIXER_VOLUME] = 9 // Master Volume - }; - - switch (x) { - case SOUND_MIXER_CS_GETDBGMASK: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_CS_GETDBGMASK:\n")); - break; - case SOUND_MIXER_CS_GETDBGLEVEL: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_CS_GETDBGLEVEL:\n")); - break; - case SOUND_MIXER_CS_SETDBGMASK: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_CS_SETDBGMASK:\n")); - break; - case SOUND_MIXER_CS_SETDBGLEVEL: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_CS_SETDBGLEVEL:\n")); - break; - case OSS_GETVERSION: - CS_DBGOUT(CS_IOCTL, 4, printk("OSS_GETVERSION:\n")); - break; - case SNDCTL_DSP_SYNC: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SYNC:\n")); - break; - case SNDCTL_DSP_SETDUPLEX: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETDUPLEX:\n")); - break; - case SNDCTL_DSP_GETCAPS: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETCAPS:\n")); - break; - case SNDCTL_DSP_RESET: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_RESET:\n")); - break; - case SNDCTL_DSP_SPEED: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SPEED:\n")); - break; - case SNDCTL_DSP_STEREO: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_STEREO:\n")); - break; - case SNDCTL_DSP_CHANNELS: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_CHANNELS:\n")); - break; - case SNDCTL_DSP_GETFMTS: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETFMTS:\n")); - break; - case SNDCTL_DSP_SETFMT: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETFMT:\n")); - break; - case SNDCTL_DSP_POST: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_POST:\n")); - break; - case SNDCTL_DSP_GETTRIGGER: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETTRIGGER:\n")); - break; - case SNDCTL_DSP_SETTRIGGER: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETTRIGGER:\n")); - break; - case SNDCTL_DSP_GETOSPACE: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOSPACE:\n")); - break; - case SNDCTL_DSP_GETISPACE: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETISPACE:\n")); - break; - case SNDCTL_DSP_NONBLOCK: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_NONBLOCK:\n")); - break; - case SNDCTL_DSP_GETODELAY: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETODELAY:\n")); - break; - case SNDCTL_DSP_GETIPTR: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETIPTR:\n")); - break; - case SNDCTL_DSP_GETOPTR: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETOPTR:\n")); - break; - case SNDCTL_DSP_GETBLKSIZE: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_GETBLKSIZE:\n")); - break; - case SNDCTL_DSP_SETFRAGMENT: - CS_DBGOUT(CS_IOCTL, 4, - printk("SNDCTL_DSP_SETFRAGMENT:\n")); - break; - case SNDCTL_DSP_SUBDIVIDE: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SUBDIVIDE:\n")); - break; - case SOUND_PCM_READ_RATE: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_RATE:\n")); - break; - case SOUND_PCM_READ_CHANNELS: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_PCM_READ_CHANNELS:\n")); - break; - case SOUND_PCM_READ_BITS: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_BITS:\n")); - break; - case SOUND_PCM_WRITE_FILTER: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_PCM_WRITE_FILTER:\n")); - break; - case SNDCTL_DSP_SETSYNCRO: - CS_DBGOUT(CS_IOCTL, 4, printk("SNDCTL_DSP_SETSYNCRO:\n")); - break; - case SOUND_PCM_READ_FILTER: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_PCM_READ_FILTER:\n")); - break; - case SOUND_MIXER_PRIVATE1: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE1:\n")); - break; - case SOUND_MIXER_PRIVATE2: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE2:\n")); - break; - case SOUND_MIXER_PRIVATE3: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE3:\n")); - break; - case SOUND_MIXER_PRIVATE4: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE4:\n")); - break; - case SOUND_MIXER_PRIVATE5: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_PRIVATE5:\n")); - break; - case SOUND_MIXER_INFO: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_INFO:\n")); - break; - case SOUND_OLD_MIXER_INFO: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_OLD_MIXER_INFO:\n")); - break; - - default: - switch (_IOC_NR(x)) { - case SOUND_MIXER_VOLUME: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_VOLUME:\n")); - break; - case SOUND_MIXER_SPEAKER: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_SPEAKER:\n")); - break; - case SOUND_MIXER_RECLEV: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_RECLEV:\n")); - break; - case SOUND_MIXER_MIC: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_MIC:\n")); - break; - case SOUND_MIXER_SYNTH: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_SYNTH:\n")); - break; - case SOUND_MIXER_RECSRC: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_RECSRC:\n")); - break; - case SOUND_MIXER_DEVMASK: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_DEVMASK:\n")); - break; - case SOUND_MIXER_RECMASK: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_RECMASK:\n")); - break; - case SOUND_MIXER_STEREODEVS: - CS_DBGOUT(CS_IOCTL, 4, - printk("SOUND_MIXER_STEREODEVS:\n")); - break; - case SOUND_MIXER_CAPS: - CS_DBGOUT(CS_IOCTL, 4, printk("SOUND_MIXER_CAPS:\n")); - break; - default: - i = _IOC_NR(x); - if (i >= SOUND_MIXER_NRDEVICES - || !(vidx = mixtable1[i])) { - CS_DBGOUT(CS_IOCTL, 4, printk - ("UNKNOWN IOCTL: 0x%.8x NR=%d\n", - x, i)); - } else { - CS_DBGOUT(CS_IOCTL, 4, printk - ("SOUND_MIXER_IOCTL AC9x: 0x%.8x NR=%d\n", - x, i)); - } - break; - } - } -} -#endif - - -static int ser_init(struct cs4297a_state *s) -{ - int i; - - CS_DBGOUT(CS_INIT, 2, - printk(KERN_INFO "cs4297a: Setting up serial parameters\n")); - - __raw_writeq(M_SYNCSER_CMD_RX_RESET | M_SYNCSER_CMD_TX_RESET, SS_CSR(R_SER_CMD)); - - __raw_writeq(M_SYNCSER_MSB_FIRST, SS_CSR(R_SER_MODE)); - __raw_writeq(32, SS_CSR(R_SER_MINFRM_SZ)); - __raw_writeq(32, SS_CSR(R_SER_MAXFRM_SZ)); - - __raw_writeq(1, SS_CSR(R_SER_TX_RD_THRSH)); - __raw_writeq(4, SS_CSR(R_SER_TX_WR_THRSH)); - __raw_writeq(8, SS_CSR(R_SER_RX_RD_THRSH)); - - /* This looks good from experimentation */ - __raw_writeq((M_SYNCSER_TXSYNC_INT | V_SYNCSER_TXSYNC_DLY(0) | M_SYNCSER_TXCLK_EXT | - M_SYNCSER_RXSYNC_INT | V_SYNCSER_RXSYNC_DLY(1) | M_SYNCSER_RXCLK_EXT | M_SYNCSER_RXSYNC_EDGE), - SS_CSR(R_SER_LINE_MODE)); - - /* This looks good from experimentation */ - __raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE, - SS_TXTBL(0)); - __raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE, - SS_TXTBL(1)); - __raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE, - SS_TXTBL(2)); - __raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE | - M_SYNCSER_SEQ_STROBE | M_SYNCSER_SEQ_LAST, SS_TXTBL(3)); - - __raw_writeq(V_SYNCSER_SEQ_COUNT(14) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE, - SS_RXTBL(0)); - __raw_writeq(V_SYNCSER_SEQ_COUNT(15) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE, - SS_RXTBL(1)); - __raw_writeq(V_SYNCSER_SEQ_COUNT(13) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_BYTE, - SS_RXTBL(2)); - __raw_writeq(V_SYNCSER_SEQ_COUNT( 0) | M_SYNCSER_SEQ_ENABLE | M_SYNCSER_SEQ_STROBE | - M_SYNCSER_SEQ_LAST, SS_RXTBL(3)); - - for (i=4; i<16; i++) { - /* Just in case... */ - __raw_writeq(M_SYNCSER_SEQ_LAST, SS_TXTBL(i)); - __raw_writeq(M_SYNCSER_SEQ_LAST, SS_RXTBL(i)); - } - - return 0; -} - -static int init_serdma(serdma_t *dma) -{ - CS_DBGOUT(CS_INIT, 2, - printk(KERN_ERR "cs4297a: desc - %d sbufsize - %d dbufsize - %d\n", - DMA_DESCR, SAMPLE_BUF_SIZE, DMA_BUF_SIZE)); - - /* Descriptors */ - dma->ringsz = DMA_DESCR; - dma->descrtab = kzalloc(dma->ringsz * sizeof(serdma_descr_t), GFP_KERNEL); - if (!dma->descrtab) { - printk(KERN_ERR "cs4297a: kzalloc descrtab failed\n"); - return -1; - } - dma->descrtab_end = dma->descrtab + dma->ringsz; - /* XXX bloddy mess, use proper DMA API here ... */ - dma->descrtab_phys = CPHYSADDR((long)dma->descrtab); - dma->descr_add = dma->descr_rem = dma->descrtab; - - /* Frame buffer area */ - dma->dma_buf = kzalloc(DMA_BUF_SIZE, GFP_KERNEL); - if (!dma->dma_buf) { - printk(KERN_ERR "cs4297a: kzalloc dma_buf failed\n"); - kfree(dma->descrtab); - return -1; - } - dma->dma_buf_phys = CPHYSADDR((long)dma->dma_buf); - - /* Samples buffer area */ - dma->sbufsz = SAMPLE_BUF_SIZE; - dma->sample_buf = kmalloc(dma->sbufsz, GFP_KERNEL); - if (!dma->sample_buf) { - printk(KERN_ERR "cs4297a: kmalloc sample_buf failed\n"); - kfree(dma->descrtab); - kfree(dma->dma_buf); - return -1; - } - dma->sb_swptr = dma->sb_hwptr = dma->sample_buf; - dma->sb_end = (u16 *)((void *)dma->sample_buf + dma->sbufsz); - dma->fragsize = dma->sbufsz >> 1; - - CS_DBGOUT(CS_INIT, 4, - printk(KERN_ERR "cs4297a: descrtab - %08x dma_buf - %x sample_buf - %x\n", - (int)dma->descrtab, (int)dma->dma_buf, - (int)dma->sample_buf)); - - return 0; -} - -static int dma_init(struct cs4297a_state *s) -{ - int i; - - CS_DBGOUT(CS_INIT, 2, - printk(KERN_INFO "cs4297a: Setting up DMA\n")); - - if (init_serdma(&s->dma_adc) || - init_serdma(&s->dma_dac)) - return -1; - - if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX))|| - __raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) { - panic("DMA state corrupted?!"); - } - - /* Initialize now - the descr/buffer pairings will never - change... */ - for (i=0; i<DMA_DESCR; i++) { - s->dma_dac.descrtab[i].descr_a = M_DMA_SERRX_SOP | V_DMA_DSCRA_A_SIZE(1) | - (s->dma_dac.dma_buf_phys + i*FRAME_BYTES); - s->dma_dac.descrtab[i].descr_b = V_DMA_DSCRB_PKT_SIZE(FRAME_BYTES); - s->dma_adc.descrtab[i].descr_a = V_DMA_DSCRA_A_SIZE(1) | - (s->dma_adc.dma_buf_phys + i*FRAME_BYTES); - s->dma_adc.descrtab[i].descr_b = 0; - } - - __raw_writeq((M_DMA_EOP_INT_EN | V_DMA_INT_PKTCNT(DMA_INT_CNT) | - V_DMA_RINGSZ(DMA_DESCR) | M_DMA_TDX_EN), - SS_CSR(R_SER_DMA_CONFIG0_RX)); - __raw_writeq(M_DMA_L2CA, SS_CSR(R_SER_DMA_CONFIG1_RX)); - __raw_writeq(s->dma_adc.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_RX)); - - __raw_writeq(V_DMA_RINGSZ(DMA_DESCR), SS_CSR(R_SER_DMA_CONFIG0_TX)); - __raw_writeq(M_DMA_L2CA | M_DMA_NO_DSCR_UPDT, SS_CSR(R_SER_DMA_CONFIG1_TX)); - __raw_writeq(s->dma_dac.descrtab_phys, SS_CSR(R_SER_DMA_DSCR_BASE_TX)); - - /* Prep the receive DMA descriptor ring */ - __raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX)); - - __raw_writeq(M_SYNCSER_DMA_RX_EN | M_SYNCSER_DMA_TX_EN, SS_CSR(R_SER_DMA_ENABLE)); - - __raw_writeq((M_SYNCSER_RX_SYNC_ERR | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_EOP_COUNT), - SS_CSR(R_SER_INT_MASK)); - - /* Enable the rx/tx; let the codec warm up to the sync and - start sending good frames before the receive FIFO is - enabled */ - __raw_writeq(M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD)); - udelay(1000); - __raw_writeq(M_SYNCSER_CMD_RX_EN | M_SYNCSER_CMD_TX_EN, SS_CSR(R_SER_CMD)); - - /* XXXKW is this magic? (the "1" part) */ - while ((__raw_readq(SS_CSR(R_SER_STATUS)) & 0xf1) != 1) - ; - - CS_DBGOUT(CS_INIT, 4, - printk(KERN_INFO "cs4297a: status: %08x\n", - (unsigned int)(__raw_readq(SS_CSR(R_SER_STATUS)) & 0xffffffff))); - - return 0; -} - -static int serdma_reg_access(struct cs4297a_state *s, u64 data) -{ - serdma_t *d = &s->dma_dac; - u64 *data_p; - unsigned swptr; - unsigned long flags; - serdma_descr_t *descr; - - if (s->reg_request) { - printk(KERN_ERR "cs4297a: attempt to issue multiple reg_access\n"); - return -1; - } - - if (s->ena & FMODE_WRITE) { - /* Since a writer has the DSP open, we have to mux the - request in */ - s->reg_request = data; - oss_broken_sleep_on(&s->dma_dac.reg_wait, MAX_SCHEDULE_TIMEOUT); - /* XXXKW how can I deal with the starvation case where - the opener isn't writing? */ - } else { - /* Be safe when changing ring pointers */ - spin_lock_irqsave(&s->lock, flags); - if (d->hwptr != d->swptr) { - printk(KERN_ERR "cs4297a: reg access found bookkeeping error (hw/sw = %d/%d\n", - d->hwptr, d->swptr); - spin_unlock_irqrestore(&s->lock, flags); - return -1; - } - swptr = d->swptr; - d->hwptr = d->swptr = (d->swptr + 1) % d->ringsz; - spin_unlock_irqrestore(&s->lock, flags); - - descr = &d->descrtab[swptr]; - data_p = &d->dma_buf[swptr * 4]; - *data_p = cpu_to_be64(data); - __raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_TX)); - CS_DBGOUT(CS_DESCR, 4, - printk(KERN_INFO "cs4297a: add_tx %p (%x -> %x)\n", - data_p, swptr, d->hwptr)); - } - - CS_DBGOUT(CS_FUNCTION, 6, - printk(KERN_INFO "cs4297a: serdma_reg_access()-\n")); - - return 0; -} - -//**************************************************************************** -// "cs4297a_read_ac97" -- Reads an AC97 register -//**************************************************************************** -static int cs4297a_read_ac97(struct cs4297a_state *s, u32 offset, - u32 * value) -{ - CS_DBGOUT(CS_AC97, 1, - printk(KERN_INFO "cs4297a: read reg %2x\n", offset)); - if (serdma_reg_access(s, (0xCLL << 60) | (1LL << 47) | ((u64)(offset & 0x7F) << 40))) - return -1; - - oss_broken_sleep_on(&s->dma_adc.reg_wait, MAX_SCHEDULE_TIMEOUT); - *value = s->read_value; - CS_DBGOUT(CS_AC97, 2, - printk(KERN_INFO "cs4297a: rdr reg %x -> %x\n", s->read_reg, s->read_value)); - - return 0; -} - - -//**************************************************************************** -// "cs4297a_write_ac97()"-- writes an AC97 register -//**************************************************************************** -static int cs4297a_write_ac97(struct cs4297a_state *s, u32 offset, - u32 value) -{ - CS_DBGOUT(CS_AC97, 1, - printk(KERN_INFO "cs4297a: write reg %2x -> %04x\n", offset, value)); - return (serdma_reg_access(s, (0xELL << 60) | ((u64)(offset & 0x7F) << 40) | ((value & 0xffff) << 12))); -} - -static void stop_dac(struct cs4297a_state *s) -{ - unsigned long flags; - - CS_DBGOUT(CS_WAVE_WRITE, 3, printk(KERN_INFO "cs4297a: stop_dac():\n")); - spin_lock_irqsave(&s->lock, flags); - s->ena &= ~FMODE_WRITE; -#if 0 - /* XXXKW what do I really want here? My theory for now is - that I just flip the "ena" bit, and the interrupt handler - will stop processing the xmit channel */ - __raw_writeq((s->ena & FMODE_READ) ? M_SYNCSER_DMA_RX_EN : 0, - SS_CSR(R_SER_DMA_ENABLE)); -#endif - - spin_unlock_irqrestore(&s->lock, flags); -} - - -static void start_dac(struct cs4297a_state *s) -{ - unsigned long flags; - - CS_DBGOUT(CS_FUNCTION, 3, printk(KERN_INFO "cs4297a: start_dac()+\n")); - spin_lock_irqsave(&s->lock, flags); - if (!(s->ena & FMODE_WRITE) && (s->dma_dac.mapped || - (s->dma_dac.count > 0 - && s->dma_dac.ready))) { - s->ena |= FMODE_WRITE; - /* XXXKW what do I really want here? My theory for - now is that I just flip the "ena" bit, and the - interrupt handler will start processing the xmit - channel */ - - CS_DBGOUT(CS_WAVE_WRITE | CS_PARMS, 8, printk(KERN_INFO - "cs4297a: start_dac(): start dma\n")); - - } - spin_unlock_irqrestore(&s->lock, flags); - CS_DBGOUT(CS_FUNCTION, 3, - printk(KERN_INFO "cs4297a: start_dac()-\n")); -} - - -static void stop_adc(struct cs4297a_state *s) -{ - unsigned long flags; - - CS_DBGOUT(CS_FUNCTION, 3, - printk(KERN_INFO "cs4297a: stop_adc()+\n")); - - spin_lock_irqsave(&s->lock, flags); - s->ena &= ~FMODE_READ; - - if (s->conversion == 1) { - s->conversion = 0; - s->prop_adc.fmt = s->prop_adc.fmt_original; - } - /* Nothing to do really, I need to keep the DMA going - XXXKW when do I get here, and is there more I should do? */ - spin_unlock_irqrestore(&s->lock, flags); - CS_DBGOUT(CS_FUNCTION, 3, - printk(KERN_INFO "cs4297a: stop_adc()-\n")); -} - - -static void start_adc(struct cs4297a_state *s) -{ - unsigned long flags; - - CS_DBGOUT(CS_FUNCTION, 2, - printk(KERN_INFO "cs4297a: start_adc()+\n")); - - if (!(s->ena & FMODE_READ) && - (s->dma_adc.mapped || s->dma_adc.count <= - (signed) (s->dma_adc.sbufsz - 2 * s->dma_adc.fragsize)) - && s->dma_adc.ready) { - if (s->prop_adc.fmt & AFMT_S8 || s->prop_adc.fmt & AFMT_U8) { - // - // now only use 16 bit capture, due to truncation issue - // in the chip, noticeable distortion occurs. - // allocate buffer and then convert from 16 bit to - // 8 bit for the user buffer. - // - s->prop_adc.fmt_original = s->prop_adc.fmt; - if (s->prop_adc.fmt & AFMT_S8) { - s->prop_adc.fmt &= ~AFMT_S8; - s->prop_adc.fmt |= AFMT_S16_LE; - } - if (s->prop_adc.fmt & AFMT_U8) { - s->prop_adc.fmt &= ~AFMT_U8; - s->prop_adc.fmt |= AFMT_U16_LE; - } - // - // prog_dmabuf_adc performs a stop_adc() but that is - // ok since we really haven't started the DMA yet. - // - prog_codec(s, CS_TYPE_ADC); - - prog_dmabuf_adc(s); - s->conversion = 1; - } - spin_lock_irqsave(&s->lock, flags); - s->ena |= FMODE_READ; - /* Nothing to do really, I am probably already - DMAing... XXXKW when do I get here, and is there - more I should do? */ - spin_unlock_irqrestore(&s->lock, flags); - - CS_DBGOUT(CS_PARMS, 6, printk(KERN_INFO - "cs4297a: start_adc(): start adc\n")); - } - CS_DBGOUT(CS_FUNCTION, 2, - printk(KERN_INFO "cs4297a: start_adc()-\n")); - -} - - -// call with spinlock held! -static void cs4297a_update_ptr(struct cs4297a_state *s, int intflag) -{ - int good_diff, diff, diff2; - u64 *data_p, data; - u32 *s_ptr; - unsigned hwptr; - u32 status; - serdma_t *d; - serdma_descr_t *descr; - - // update ADC pointer - status = intflag ? __raw_readq(SS_CSR(R_SER_STATUS)) : 0; - - if ((s->ena & FMODE_READ) || (status & (M_SYNCSER_RX_EOP_COUNT))) { - d = &s->dma_adc; - hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) - - d->descrtab_phys) / sizeof(serdma_descr_t)); - - if (s->ena & FMODE_READ) { - CS_DBGOUT(CS_FUNCTION, 2, - printk(KERN_INFO "cs4297a: upd_rcv sw->hw->hw %x/%x/%x (int-%d)n", - d->swptr, d->hwptr, hwptr, intflag)); - /* Number of DMA buffers available for software: */ - diff2 = diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz; - d->hwptr = hwptr; - good_diff = 0; - s_ptr = (u32 *)&(d->dma_buf[d->swptr*4]); - descr = &d->descrtab[d->swptr]; - while (diff2--) { - u64 data = be64_to_cpu(*(u64 *)s_ptr); - u64 descr_a; - u16 left, right; - descr_a = descr->descr_a; - descr->descr_a &= ~M_DMA_SERRX_SOP; - if ((descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)s_ptr)) { - printk(KERN_ERR "cs4297a: RX Bad address (read)\n"); - } - if (((data & 0x9800000000000000) != 0x9800000000000000) || - (!(descr_a & M_DMA_SERRX_SOP)) || - (G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) { - s->stats.rx_bad++; - printk(KERN_DEBUG "cs4297a: RX Bad attributes (read)\n"); - continue; - } - s->stats.rx_good++; - if ((data >> 61) == 7) { - s->read_value = (data >> 12) & 0xffff; - s->read_reg = (data >> 40) & 0x7f; - wake_up(&d->reg_wait); - } - if (d->count && (d->sb_hwptr == d->sb_swptr)) { - s->stats.rx_overflow++; - printk(KERN_DEBUG "cs4297a: RX overflow\n"); - continue; - } - good_diff++; - left = ((be32_to_cpu(s_ptr[1]) & 0xff) << 8) | - ((be32_to_cpu(s_ptr[2]) >> 24) & 0xff); - right = (be32_to_cpu(s_ptr[2]) >> 4) & 0xffff; - *d->sb_hwptr++ = cpu_to_be16(left); - *d->sb_hwptr++ = cpu_to_be16(right); - if (d->sb_hwptr == d->sb_end) - d->sb_hwptr = d->sample_buf; - descr++; - if (descr == d->descrtab_end) { - descr = d->descrtab; - s_ptr = (u32 *)s->dma_adc.dma_buf; - } else { - s_ptr += 8; - } - } - d->total_bytes += good_diff * FRAME_SAMPLE_BYTES; - d->count += good_diff * FRAME_SAMPLE_BYTES; - if (d->count > d->sbufsz) { - printk(KERN_ERR "cs4297a: bogus receive overflow!!\n"); - } - d->swptr = (d->swptr + diff) % d->ringsz; - __raw_writeq(diff, SS_CSR(R_SER_DMA_DSCR_COUNT_RX)); - if (d->mapped) { - if (d->count >= (signed) d->fragsize) - wake_up(&d->wait); - } else { - if (d->count > 0) { - CS_DBGOUT(CS_WAVE_READ, 4, - printk(KERN_INFO - "cs4297a: update count -> %d\n", d->count)); - wake_up(&d->wait); - } - } - } else { - /* Receive is going even if no one is - listening (for register accesses and to - avoid FIFO overrun) */ - diff2 = diff = (hwptr + d->ringsz - d->hwptr) % d->ringsz; - if (!diff) { - printk(KERN_ERR "cs4297a: RX full or empty?\n"); - } - - descr = &d->descrtab[d->swptr]; - data_p = &d->dma_buf[d->swptr*4]; - - /* Force this to happen at least once; I got - here because of an interrupt, so there must - be a buffer to process. */ - do { - data = be64_to_cpu(*data_p); - if ((descr->descr_a & M_DMA_DSCRA_A_ADDR) != CPHYSADDR((long)data_p)) { - printk(KERN_ERR "cs4297a: RX Bad address %d (%llx %lx)\n", d->swptr, - (long long)(descr->descr_a & M_DMA_DSCRA_A_ADDR), - (long)CPHYSADDR((long)data_p)); - } - if (!(data & (1LL << 63)) || - !(descr->descr_a & M_DMA_SERRX_SOP) || - (G_DMA_DSCRB_PKT_SIZE(descr->descr_b) != FRAME_BYTES)) { - s->stats.rx_bad++; - printk(KERN_DEBUG "cs4297a: RX Bad attributes\n"); - } else { - s->stats.rx_good++; - if ((data >> 61) == 7) { - s->read_value = (data >> 12) & 0xffff; - s->read_reg = (data >> 40) & 0x7f; - wake_up(&d->reg_wait); - } - } - descr->descr_a &= ~M_DMA_SERRX_SOP; - descr++; - d->swptr++; - data_p += 4; - if (descr == d->descrtab_end) { - descr = d->descrtab; - d->swptr = 0; - data_p = d->dma_buf; - } - __raw_writeq(1, SS_CSR(R_SER_DMA_DSCR_COUNT_RX)); - } while (--diff); - d->hwptr = hwptr; - - CS_DBGOUT(CS_DESCR, 6, - printk(KERN_INFO "cs4297a: hw/sw %x/%x\n", d->hwptr, d->swptr)); - } - - CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO - "cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n", - (unsigned)s, d->hwptr, - d->total_bytes, d->count)); - } - - /* XXXKW worry about s->reg_request -- there is a starvation - case if s->ena has FMODE_WRITE on, but the client isn't - doing writes */ - - // update DAC pointer - // - // check for end of buffer, means that we are going to wait for another interrupt - // to allow silence to fill the fifos on the part, to keep pops down to a minimum. - // - if (s->ena & FMODE_WRITE) { - serdma_t *d = &s->dma_dac; - hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) - - d->descrtab_phys) / sizeof(serdma_descr_t)); - diff = (d->ringsz + hwptr - d->hwptr) % d->ringsz; - CS_DBGOUT(CS_WAVE_WRITE, 4, printk(KERN_INFO - "cs4297a: cs4297a_update_ptr(): hw/hw/sw %x/%x/%x diff %d count %d\n", - d->hwptr, hwptr, d->swptr, diff, d->count)); - d->hwptr = hwptr; - /* XXXKW stereo? conversion? Just assume 2 16-bit samples for now */ - d->total_bytes += diff * FRAME_SAMPLE_BYTES; - if (d->mapped) { - d->count += diff * FRAME_SAMPLE_BYTES; - if (d->count >= d->fragsize) { - d->wakeup = 1; - wake_up(&d->wait); - if (d->count > d->sbufsz) - d->count &= d->sbufsz - 1; - } - } else { - d->count -= diff * FRAME_SAMPLE_BYTES; - if (d->count <= 0) { - // - // fill with silence, and do not shut down the DAC. - // Continue to play silence until the _release. - // - CS_DBGOUT(CS_WAVE_WRITE, 6, printk(KERN_INFO - "cs4297a: cs4297a_update_ptr(): memset %d at 0x%.8x for %d size \n", - (unsigned)(s->prop_dac.fmt & - (AFMT_U8 | AFMT_U16_LE)) ? 0x80 : 0, - (unsigned)d->dma_buf, - d->ringsz)); - memset(d->dma_buf, 0, d->ringsz * FRAME_BYTES); - if (d->count < 0) { - d->underrun = 1; - s->stats.tx_underrun++; - d->count = 0; - CS_DBGOUT(CS_ERROR, 9, printk(KERN_INFO - "cs4297a: cs4297a_update_ptr(): underrun\n")); - } - } else if (d->count <= - (signed) d->fragsize - && !d->endcleared) { - /* XXXKW what is this for? */ - clear_advance(d->dma_buf, - d->sbufsz, - d->swptr, - d->fragsize, - 0); - d->endcleared = 1; - } - if ( (d->count <= (signed) d->sbufsz/2) || intflag) - { - CS_DBGOUT(CS_WAVE_WRITE, 4, - printk(KERN_INFO - "cs4297a: update count -> %d\n", d->count)); - wake_up(&d->wait); - } - } - CS_DBGOUT(CS_PARMS, 8, printk(KERN_INFO - "cs4297a: cs4297a_update_ptr(): s=0x%.8x hwptr=%d total_bytes=%d count=%d \n", - (unsigned) s, d->hwptr, - d->total_bytes, d->count)); - } -} - -static int mixer_ioctl(struct cs4297a_state *s, unsigned int cmd, - unsigned long arg) -{ - // Index to mixer_src[] is value of AC97 Input Mux Select Reg. - // Value of array member is recording source Device ID Mask. - static const unsigned int mixer_src[8] = { - SOUND_MASK_MIC, SOUND_MASK_CD, 0, SOUND_MASK_LINE1, - SOUND_MASK_LINE, SOUND_MASK_VOLUME, 0, 0 - }; - - // Index of mixtable1[] member is Device ID - // and must be <= SOUND_MIXER_NRDEVICES. - // Value of array member is index into s->mix.vol[] - static const unsigned char mixtable1[SOUND_MIXER_NRDEVICES] = { - [SOUND_MIXER_PCM] = 1, // voice - [SOUND_MIXER_LINE1] = 2, // AUX - [SOUND_MIXER_CD] = 3, // CD - [SOUND_MIXER_LINE] = 4, // Line - [SOUND_MIXER_SYNTH] = 5, // FM - [SOUND_MIXER_MIC] = 6, // Mic - [SOUND_MIXER_SPEAKER] = 7, // Speaker - [SOUND_MIXER_RECLEV] = 8, // Recording level - [SOUND_MIXER_VOLUME] = 9 // Master Volume - }; - - static const unsigned mixreg[] = { - AC97_PCMOUT_VOL, - AC97_AUX_VOL, - AC97_CD_VOL, - AC97_LINEIN_VOL - }; - unsigned char l, r, rl, rr, vidx; - unsigned char attentbl[11] = - { 63, 42, 26, 17, 14, 11, 8, 6, 4, 2, 0 }; - unsigned temp1; - int i, val; - - VALIDATE_STATE(s); - CS_DBGOUT(CS_FUNCTION, 4, printk(KERN_INFO - "cs4297a: mixer_ioctl(): s=0x%.8x cmd=0x%.8x\n", - (unsigned) s, cmd)); -#if CSDEBUG - cs_printioctl(cmd); -#endif -#if CSDEBUG_INTERFACE - - if ((cmd == SOUND_MIXER_CS_GETDBGMASK) || - (cmd == SOUND_MIXER_CS_SETDBGMASK) || - (cmd == SOUND_MIXER_CS_GETDBGLEVEL) || - (cmd == SOUND_MIXER_CS_SETDBGLEVEL)) - { - switch (cmd) { - - case SOUND_MIXER_CS_GETDBGMASK: - return put_user(cs_debugmask, - (unsigned long *) arg); - - case SOUND_MIXER_CS_GETDBGLEVEL: - return put_user(cs_debuglevel, - (unsigned long *) arg); - - case SOUND_MIXER_CS_SETDBGMASK: - if (get_user(val, (unsigned long *) arg)) - return -EFAULT; - cs_debugmask = val; - return 0; - - case SOUND_MIXER_CS_SETDBGLEVEL: - if (get_user(val, (unsigned long *) arg)) - return -EFAULT; - cs_debuglevel = val; - return 0; - default: - CS_DBGOUT(CS_ERROR, 1, printk(KERN_INFO - "cs4297a: mixer_ioctl(): ERROR unknown debug cmd\n")); - return 0; - } - } -#endif - - if (cmd == SOUND_MIXER_PRIVATE1) { - return -EINVAL; - } - if (cmd == SOUND_MIXER_PRIVATE2) { - // enable/disable/query spatializer - if (get_user(val, (int *) arg)) - return -EFAULT; - if (val != -1) { - temp1 = (val & 0x3f) >> 2; - cs4297a_write_ac97(s, AC97_3D_CONTROL, temp1); - cs4297a_read_ac97(s, AC97_GENERAL_PURPOSE, - &temp1); - cs4297a_write_ac97(s, AC97_GENERAL_PURPOSE, - temp1 | 0x2000); - } - cs4297a_read_ac97(s, AC97_3D_CONTROL, &temp1); - return put_user((temp1 << 2) | 3, (int *) arg); - } - if (cmd == SOUND_MIXER_INFO) { - mixer_info info; - memset(&info, 0, sizeof(info)); - strlcpy(info.id, "CS4297a", sizeof(info.id)); - strlcpy(info.name, "Crystal CS4297a", sizeof(info.name)); - info.modify_counter = s->mix.modcnt; - if (copy_to_user((void *) arg, &info, sizeof(info))) - return -EFAULT; - return 0; - } - if (cmd == SOUND_OLD_MIXER_INFO) { - _old_mixer_info info; - memset(&info, 0, sizeof(info)); - strlcpy(info.id, "CS4297a", sizeof(info.id)); - strlcpy(info.name, "Crystal CS4297a", sizeof(info.name)); - if (copy_to_user((void *) arg, &info, sizeof(info))) - return -EFAULT; - return 0; - } - if (cmd == OSS_GETVERSION) - return put_user(SOUND_VERSION, (int *) arg); - - if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int)) - return -EINVAL; - - // If ioctl has only the SIOC_READ bit(bit 31) - // on, process the only-read commands. - if (_SIOC_DIR(cmd) == _SIOC_READ) { - switch (_IOC_NR(cmd)) { - case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source - cs4297a_read_ac97(s, AC97_RECORD_SELECT, - &temp1); - return put_user(mixer_src[temp1 & 7], (int *) arg); - - case SOUND_MIXER_DEVMASK: // Arg contains a bit for each supported device - return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_VOLUME | SOUND_MASK_RECLEV, - (int *) arg); - - case SOUND_MIXER_RECMASK: // Arg contains a bit for each supported recording source - return put_user(SOUND_MASK_LINE | SOUND_MASK_VOLUME, - (int *) arg); - - case SOUND_MIXER_STEREODEVS: // Mixer channels supporting stereo - return put_user(SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_VOLUME | SOUND_MASK_RECLEV, - (int *) arg); - - case SOUND_MIXER_CAPS: - return put_user(SOUND_CAP_EXCL_INPUT, (int *) arg); - - default: - i = _IOC_NR(cmd); - if (i >= SOUND_MIXER_NRDEVICES - || !(vidx = mixtable1[i])) - return -EINVAL; - return put_user(s->mix.vol[vidx - 1], (int *) arg); - } - } - // If ioctl doesn't have both the SIOC_READ and - // the SIOC_WRITE bit set, return invalid. - if (_SIOC_DIR(cmd) != (_SIOC_READ | _SIOC_WRITE)) - return -EINVAL; - - // Increment the count of volume writes. - s->mix.modcnt++; - - // Isolate the command; it must be a write. - switch (_IOC_NR(cmd)) { - - case SOUND_MIXER_RECSRC: // Arg contains a bit for each recording source - if (get_user(val, (int *) arg)) - return -EFAULT; - i = hweight32(val); // i = # bits on in val. - if (i != 1) // One & only 1 bit must be on. - return 0; - for (i = 0; i < sizeof(mixer_src) / sizeof(int); i++) { - if (val == mixer_src[i]) { - temp1 = (i << 8) | i; - cs4297a_write_ac97(s, - AC97_RECORD_SELECT, - temp1); - return 0; - } - } - return 0; - - case SOUND_MIXER_VOLUME: - if (get_user(val, (int *) arg)) - return -EFAULT; - l = val & 0xff; - if (l > 100) - l = 100; // Max soundcard.h vol is 100. - if (l < 6) { - rl = 63; - l = 0; - } else - rl = attentbl[(10 * l) / 100]; // Convert 0-100 vol to 63-0 atten. - - r = (val >> 8) & 0xff; - if (r > 100) - r = 100; // Max right volume is 100, too - if (r < 6) { - rr = 63; - r = 0; - } else - rr = attentbl[(10 * r) / 100]; // Convert volume to attenuation. - - if ((rl > 60) && (rr > 60)) // If both l & r are 'low', - temp1 = 0x8000; // turn on the mute bit. - else - temp1 = 0; - - temp1 |= (rl << 8) | rr; - - cs4297a_write_ac97(s, AC97_MASTER_VOL_STEREO, temp1); - cs4297a_write_ac97(s, AC97_PHONE_VOL, temp1); - -#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS - s->mix.vol[8] = ((unsigned int) r << 8) | l; -#else - s->mix.vol[8] = val; -#endif - return put_user(s->mix.vol[8], (int *) arg); - - case SOUND_MIXER_SPEAKER: - if (get_user(val, (int *) arg)) - return -EFAULT; - l = val & 0xff; - if (l > 100) - l = 100; - if (l < 3) { - rl = 0; - l = 0; - } else { - rl = (l * 2 - 5) / 13; // Convert 0-100 range to 0-15. - l = (rl * 13 + 5) / 2; - } - - if (rl < 3) { - temp1 = 0x8000; - rl = 0; - } else - temp1 = 0; - rl = 15 - rl; // Convert volume to attenuation. - temp1 |= rl << 1; - cs4297a_write_ac97(s, AC97_PCBEEP_VOL, temp1); - -#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS - s->mix.vol[6] = l << 8; -#else - s->mix.vol[6] = val; -#endif - return put_user(s->mix.vol[6], (int *) arg); - - case SOUND_MIXER_RECLEV: - if (get_user(val, (int *) arg)) - return -EFAULT; - l = val & 0xff; - if (l > 100) - l = 100; - r = (val >> 8) & 0xff; - if (r > 100) - r = 100; - rl = (l * 2 - 5) / 13; // Convert 0-100 scale to 0-15. - rr = (r * 2 - 5) / 13; - if (rl < 3 && rr < 3) - temp1 = 0x8000; - else - temp1 = 0; - - temp1 = temp1 | (rl << 8) | rr; - cs4297a_write_ac97(s, AC97_RECORD_GAIN, temp1); - -#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS - s->mix.vol[7] = ((unsigned int) r << 8) | l; -#else - s->mix.vol[7] = val; -#endif - return put_user(s->mix.vol[7], (int *) arg); - - case SOUND_MIXER_MIC: - if (get_user(val, (int *) arg)) - return -EFAULT; - l = val & 0xff; - if (l > 100) - l = 100; - if (l < 1) { - l = 0; - rl = 0; - } else { - rl = ((unsigned) l * 5 - 4) / 16; // Convert 0-100 range to 0-31. - l = (rl * 16 + 4) / 5; - } - cs4297a_read_ac97(s, AC97_MIC_VOL, &temp1); - temp1 &= 0x40; // Isolate 20db gain bit. - if (rl < 3) { - temp1 |= 0x8000; - rl = 0; - } - rl = 31 - rl; // Convert volume to attenuation. - temp1 |= rl; - cs4297a_write_ac97(s, AC97_MIC_VOL, temp1); - -#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS - s->mix.vol[5] = val << 8; -#else - s->mix.vol[5] = val; -#endif - return put_user(s->mix.vol[5], (int *) arg); - - - case SOUND_MIXER_SYNTH: - if (get_user(val, (int *) arg)) - return -EFAULT; - l = val & 0xff; - if (l > 100) - l = 100; - if (get_user(val, (int *) arg)) - return -EFAULT; - r = (val >> 8) & 0xff; - if (r > 100) - r = 100; - rl = (l * 2 - 11) / 3; // Convert 0-100 range to 0-63. - rr = (r * 2 - 11) / 3; - if (rl < 3) // If l is low, turn on - temp1 = 0x0080; // the mute bit. - else - temp1 = 0; - - rl = 63 - rl; // Convert vol to attenuation. -// writel(temp1 | rl, s->pBA0 + FMLVC); - if (rr < 3) // If rr is low, turn on - temp1 = 0x0080; // the mute bit. - else - temp1 = 0; - rr = 63 - rr; // Convert vol to attenuation. -// writel(temp1 | rr, s->pBA0 + FMRVC); - -#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS - s->mix.vol[4] = (r << 8) | l; -#else - s->mix.vol[4] = val; -#endif - return put_user(s->mix.vol[4], (int *) arg); - - - default: - CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO - "cs4297a: mixer_ioctl(): default\n")); - - i = _IOC_NR(cmd); - if (i >= SOUND_MIXER_NRDEVICES || !(vidx = mixtable1[i])) - return -EINVAL; - if (get_user(val, (int *) arg)) - return -EFAULT; - l = val & 0xff; - if (l > 100) - l = 100; - if (l < 1) { - l = 0; - rl = 31; - } else - rl = (attentbl[(l * 10) / 100]) >> 1; - - r = (val >> 8) & 0xff; - if (r > 100) - r = 100; - if (r < 1) { - r = 0; - rr = 31; - } else - rr = (attentbl[(r * 10) / 100]) >> 1; - if ((rl > 30) && (rr > 30)) - temp1 = 0x8000; - else - temp1 = 0; - temp1 = temp1 | (rl << 8) | rr; - cs4297a_write_ac97(s, mixreg[vidx - 1], temp1); - -#ifdef OSS_DOCUMENTED_MIXER_SEMANTICS - s->mix.vol[vidx - 1] = ((unsigned int) r << 8) | l; -#else - s->mix.vol[vidx - 1] = val; -#endif - return put_user(s->mix.vol[vidx - 1], (int *) arg); - } -} - - -// --------------------------------------------------------------------- - -static int cs4297a_open_mixdev(struct inode *inode, struct file *file) -{ - int minor = iminor(inode); - struct cs4297a_state *s=NULL; - struct list_head *entry; - - CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4, - printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()+\n")); - - mutex_lock(&swarm_cs4297a_mutex); - list_for_each(entry, &cs4297a_devs) - { - s = list_entry(entry, struct cs4297a_state, list); - if(s->dev_mixer == minor) - break; - } - if (!s) - { - CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, - printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- -ENODEV\n")); - - mutex_unlock(&swarm_cs4297a_mutex); - return -ENODEV; - } - VALIDATE_STATE(s); - file->private_data = s; - - CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4, - printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- 0\n")); - mutex_unlock(&swarm_cs4297a_mutex); - - return nonseekable_open(inode, file); -} - - -static int cs4297a_release_mixdev(struct inode *inode, struct file *file) -{ - struct cs4297a_state *s = - (struct cs4297a_state *) file->private_data; - - VALIDATE_STATE(s); - return 0; -} - - -static int cs4297a_ioctl_mixdev(struct file *file, - unsigned int cmd, unsigned long arg) -{ - int ret; - mutex_lock(&swarm_cs4297a_mutex); - ret = mixer_ioctl((struct cs4297a_state *) file->private_data, cmd, - arg); - mutex_unlock(&swarm_cs4297a_mutex); - return ret; -} - - -// ****************************************************************************************** -// Mixer file operations struct. -// ****************************************************************************************** -static const struct file_operations cs4297a_mixer_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .unlocked_ioctl = cs4297a_ioctl_mixdev, - .open = cs4297a_open_mixdev, - .release = cs4297a_release_mixdev, -}; - -// --------------------------------------------------------------------- - - -static int drain_adc(struct cs4297a_state *s, int nonblock) -{ - /* This routine serves no purpose currently - any samples - sitting in the receive queue will just be processed by the - background consumer. This would be different if DMA - actually stopped when there were no clients. */ - return 0; -} - -static int drain_dac(struct cs4297a_state *s, int nonblock) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long flags; - unsigned hwptr; - unsigned tmo; - int count; - - if (s->dma_dac.mapped) - return 0; - if (nonblock) - return -EBUSY; - add_wait_queue(&s->dma_dac.wait, &wait); - while ((count = __raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) || - (s->dma_dac.count > 0)) { - if (!signal_pending(current)) { - set_current_state(TASK_INTERRUPTIBLE); - /* XXXKW is this calculation working? */ - tmo = ((count * FRAME_TX_US) * HZ) / 1000000; - schedule_timeout(tmo + 1); - } else { - /* XXXKW do I care if there is a signal pending? */ - } - } - spin_lock_irqsave(&s->lock, flags); - /* Reset the bookkeeping */ - hwptr = (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) - - s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t)); - s->dma_dac.hwptr = s->dma_dac.swptr = hwptr; - spin_unlock_irqrestore(&s->lock, flags); - remove_wait_queue(&s->dma_dac.wait, &wait); - __set_current_state(TASK_RUNNING); - return 0; -} - - -// --------------------------------------------------------------------- - -static ssize_t cs4297a_read(struct file *file, char *buffer, size_t count, - loff_t * ppos) -{ - struct cs4297a_state *s = - (struct cs4297a_state *) file->private_data; - ssize_t ret; - unsigned long flags; - int cnt, count_fr, cnt_by; - unsigned copied = 0; - - CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2, - printk(KERN_INFO "cs4297a: cs4297a_read()+ %d \n", count)); - - VALIDATE_STATE(s); - if (s->dma_adc.mapped) - return -ENXIO; - if (!s->dma_adc.ready && (ret = prog_dmabuf_adc(s))) - return ret; - if (!access_ok(VERIFY_WRITE, buffer, count)) - return -EFAULT; - ret = 0; -// -// "count" is the amount of bytes to read (from app), is decremented each loop -// by the amount of bytes that have been returned to the user buffer. -// "cnt" is the running total of each read from the buffer (changes each loop) -// "buffer" points to the app's buffer -// "ret" keeps a running total of the amount of bytes that have been copied -// to the user buffer. -// "copied" is the total bytes copied into the user buffer for each loop. -// - while (count > 0) { - CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO - "_read() count>0 count=%d .count=%d .swptr=%d .hwptr=%d \n", - count, s->dma_adc.count, - s->dma_adc.swptr, s->dma_adc.hwptr)); - spin_lock_irqsave(&s->lock, flags); - - /* cnt will be the number of available samples (16-bit - stereo); it starts out as the maxmimum consequetive - samples */ - cnt = (s->dma_adc.sb_end - s->dma_adc.sb_swptr) / 2; - count_fr = s->dma_adc.count / FRAME_SAMPLE_BYTES; - - // dma_adc.count is the current total bytes that have not been read. - // if the amount of unread bytes from the current sw pointer to the - // end of the buffer is greater than the current total bytes that - // have not been read, then set the "cnt" (unread bytes) to the - // amount of unread bytes. - - if (count_fr < cnt) - cnt = count_fr; - cnt_by = cnt * FRAME_SAMPLE_BYTES; - spin_unlock_irqrestore(&s->lock, flags); - // - // if we are converting from 8/16 then we need to copy - // twice the number of 16 bit bytes then 8 bit bytes. - // - if (s->conversion) { - if (cnt_by > (count * 2)) { - cnt = (count * 2) / FRAME_SAMPLE_BYTES; - cnt_by = count * 2; - } - } else { - if (cnt_by > count) { - cnt = count / FRAME_SAMPLE_BYTES; - cnt_by = count; - } - } - // - // "cnt" NOW is the smaller of the amount that will be read, - // and the amount that is requested in this read (or partial). - // if there are no bytes in the buffer to read, then start the - // ADC and wait for the interrupt handler to wake us up. - // - if (cnt <= 0) { - - // start up the dma engine and then continue back to the top of - // the loop when wake up occurs. - start_adc(s); - if (file->f_flags & O_NONBLOCK) - return ret ? ret : -EAGAIN; - oss_broken_sleep_on(&s->dma_adc.wait, MAX_SCHEDULE_TIMEOUT); - if (signal_pending(current)) - return ret ? ret : -ERESTARTSYS; - continue; - } - // there are bytes in the buffer to read. - // copy from the hw buffer over to the user buffer. - // user buffer is designated by "buffer" - // virtual address to copy from is dma_buf+swptr - // the "cnt" is the number of bytes to read. - - CS_DBGOUT(CS_WAVE_READ, 2, printk(KERN_INFO - "_read() copy_to cnt=%d count=%d ", cnt_by, count)); - CS_DBGOUT(CS_WAVE_READ, 8, printk(KERN_INFO - " .sbufsz=%d .count=%d buffer=0x%.8x ret=%d\n", - s->dma_adc.sbufsz, s->dma_adc.count, - (unsigned) buffer, ret)); - - if (copy_to_user (buffer, ((void *)s->dma_adc.sb_swptr), cnt_by)) - return ret ? ret : -EFAULT; - copied = cnt_by; - - /* Return the descriptors */ - spin_lock_irqsave(&s->lock, flags); - CS_DBGOUT(CS_FUNCTION, 2, - printk(KERN_INFO "cs4297a: upd_rcv sw->hw %x/%x\n", s->dma_adc.swptr, s->dma_adc.hwptr)); - s->dma_adc.count -= cnt_by; - s->dma_adc.sb_swptr += cnt * 2; - if (s->dma_adc.sb_swptr == s->dma_adc.sb_end) - s->dma_adc.sb_swptr = s->dma_adc.sample_buf; - spin_unlock_irqrestore(&s->lock, flags); - count -= copied; - buffer += copied; - ret += copied; - start_adc(s); - } - CS_DBGOUT(CS_FUNCTION | CS_WAVE_READ, 2, - printk(KERN_INFO "cs4297a: cs4297a_read()- %d\n", ret)); - return ret; -} - - -static ssize_t cs4297a_write(struct file *file, const char *buffer, - size_t count, loff_t * ppos) -{ - struct cs4297a_state *s = - (struct cs4297a_state *) file->private_data; - ssize_t ret; - unsigned long flags; - unsigned swptr, hwptr; - int cnt; - - CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2, - printk(KERN_INFO "cs4297a: cs4297a_write()+ count=%d\n", - count)); - VALIDATE_STATE(s); - - if (s->dma_dac.mapped) - return -ENXIO; - if (!s->dma_dac.ready && (ret = prog_dmabuf_dac(s))) - return ret; - if (!access_ok(VERIFY_READ, buffer, count)) - return -EFAULT; - ret = 0; - while (count > 0) { - serdma_t *d = &s->dma_dac; - int copy_cnt; - u32 *s_tmpl; - u32 *t_tmpl; - u32 left, right; - int swap = (s->prop_dac.fmt == AFMT_S16_LE) || (s->prop_dac.fmt == AFMT_U16_LE); - - /* XXXXXX this is broken for BLOAT_FACTOR */ - spin_lock_irqsave(&s->lock, flags); - if (d->count < 0) { - d->count = 0; - d->swptr = d->hwptr; - } - if (d->underrun) { - d->underrun = 0; - hwptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) - - d->descrtab_phys) / sizeof(serdma_descr_t)); - d->swptr = d->hwptr = hwptr; - } - swptr = d->swptr; - cnt = d->sbufsz - (swptr * FRAME_SAMPLE_BYTES); - /* Will this write fill up the buffer? */ - if (d->count + cnt > d->sbufsz) - cnt = d->sbufsz - d->count; - spin_unlock_irqrestore(&s->lock, flags); - if (cnt > count) - cnt = count; - if (cnt <= 0) { - start_dac(s); - if (file->f_flags & O_NONBLOCK) - return ret ? ret : -EAGAIN; - oss_broken_sleep_on(&d->wait, MAX_SCHEDULE_TIMEOUT); - if (signal_pending(current)) - return ret ? ret : -ERESTARTSYS; - continue; - } - if (copy_from_user(d->sample_buf, buffer, cnt)) - return ret ? ret : -EFAULT; - - copy_cnt = cnt; - s_tmpl = (u32 *)d->sample_buf; - t_tmpl = (u32 *)(d->dma_buf + (swptr * 4)); - - /* XXXKW assuming 16-bit stereo! */ - do { - u32 tmp; - - t_tmpl[0] = cpu_to_be32(0x98000000); - - tmp = be32_to_cpu(s_tmpl[0]); - left = tmp & 0xffff; - right = tmp >> 16; - if (swap) { - left = swab16(left); - right = swab16(right); - } - t_tmpl[1] = cpu_to_be32(left >> 8); - t_tmpl[2] = cpu_to_be32(((left & 0xff) << 24) | - (right << 4)); - - s_tmpl++; - t_tmpl += 8; - copy_cnt -= 4; - } while (copy_cnt); - - /* Mux in any pending read/write accesses */ - if (s->reg_request) { - *(u64 *)(d->dma_buf + (swptr * 4)) |= - cpu_to_be64(s->reg_request); - s->reg_request = 0; - wake_up(&s->dma_dac.reg_wait); - } - - CS_DBGOUT(CS_WAVE_WRITE, 4, - printk(KERN_INFO - "cs4297a: copy in %d to swptr %x\n", cnt, swptr)); - - swptr = (swptr + (cnt/FRAME_SAMPLE_BYTES)) % d->ringsz; - __raw_writeq(cnt/FRAME_SAMPLE_BYTES, SS_CSR(R_SER_DMA_DSCR_COUNT_TX)); - spin_lock_irqsave(&s->lock, flags); - d->swptr = swptr; - d->count += cnt; - d->endcleared = 0; - spin_unlock_irqrestore(&s->lock, flags); - count -= cnt; - buffer += cnt; - ret += cnt; - start_dac(s); - } - CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE, 2, - printk(KERN_INFO "cs4297a: cs4297a_write()- %d\n", ret)); - return ret; -} - - -static unsigned int cs4297a_poll(struct file *file, - struct poll_table_struct *wait) -{ - struct cs4297a_state *s = - (struct cs4297a_state *) file->private_data; - unsigned long flags; - unsigned int mask = 0; - - CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, - printk(KERN_INFO "cs4297a: cs4297a_poll()+\n")); - VALIDATE_STATE(s); - if (file->f_mode & FMODE_WRITE) { - CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, - printk(KERN_INFO - "cs4297a: cs4297a_poll() wait on FMODE_WRITE\n")); - if(!s->dma_dac.ready && prog_dmabuf_dac(s)) - return 0; - poll_wait(file, &s->dma_dac.wait, wait); - } - if (file->f_mode & FMODE_READ) { - CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, - printk(KERN_INFO - "cs4297a: cs4297a_poll() wait on FMODE_READ\n")); - if(!s->dma_dac.ready && prog_dmabuf_adc(s)) - return 0; - poll_wait(file, &s->dma_adc.wait, wait); - } - spin_lock_irqsave(&s->lock, flags); - cs4297a_update_ptr(s,CS_FALSE); - if (file->f_mode & FMODE_WRITE) { - if (s->dma_dac.mapped) { - if (s->dma_dac.count >= - (signed) s->dma_dac.fragsize) { - if (s->dma_dac.wakeup) - mask |= POLLOUT | POLLWRNORM; - else - mask = 0; - s->dma_dac.wakeup = 0; - } - } else { - if ((signed) (s->dma_dac.sbufsz/2) >= s->dma_dac.count) - mask |= POLLOUT | POLLWRNORM; - } - } else if (file->f_mode & FMODE_READ) { - if (s->dma_adc.mapped) { - if (s->dma_adc.count >= (signed) s->dma_adc.fragsize) - mask |= POLLIN | POLLRDNORM; - } else { - if (s->dma_adc.count > 0) - mask |= POLLIN | POLLRDNORM; - } - } - spin_unlock_irqrestore(&s->lock, flags); - CS_DBGOUT(CS_FUNCTION | CS_WAVE_WRITE | CS_WAVE_READ, 4, - printk(KERN_INFO "cs4297a: cs4297a_poll()- 0x%.8x\n", - mask)); - return mask; -} - - -static int cs4297a_mmap(struct file *file, struct vm_area_struct *vma) -{ - /* XXXKW currently no mmap support */ - return -EINVAL; - return 0; -} - - -static int cs4297a_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct cs4297a_state *s = - (struct cs4297a_state *) file->private_data; - unsigned long flags; - audio_buf_info abinfo; - count_info cinfo; - int val, mapped, ret; - - CS_DBGOUT(CS_FUNCTION|CS_IOCTL, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): file=0x%.8x cmd=0x%.8x\n", - (unsigned) file, cmd)); -#if CSDEBUG - cs_printioctl(cmd); -#endif - VALIDATE_STATE(s); - mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) || - ((file->f_mode & FMODE_READ) && s->dma_adc.mapped); - switch (cmd) { - case OSS_GETVERSION: - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): SOUND_VERSION=0x%.8x\n", - SOUND_VERSION)); - return put_user(SOUND_VERSION, (int *) arg); - - case SNDCTL_DSP_SYNC: - CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_SYNC\n")); - if (file->f_mode & FMODE_WRITE) - return drain_dac(s, - 0 /*file->f_flags & O_NONBLOCK */ - ); - return 0; - - case SNDCTL_DSP_SETDUPLEX: - return 0; - - case SNDCTL_DSP_GETCAPS: - return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME | - DSP_CAP_TRIGGER | DSP_CAP_MMAP, - (int *) arg); - - case SNDCTL_DSP_RESET: - CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_RESET\n")); - if (file->f_mode & FMODE_WRITE) { - stop_dac(s); - synchronize_irq(s->irq); - s->dma_dac.count = s->dma_dac.total_bytes = - s->dma_dac.blocks = s->dma_dac.wakeup = 0; - s->dma_dac.swptr = s->dma_dac.hwptr = - (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_TX)) & M_DMA_CURDSCR_ADDR) - - s->dma_dac.descrtab_phys) / sizeof(serdma_descr_t)); - } - if (file->f_mode & FMODE_READ) { - stop_adc(s); - synchronize_irq(s->irq); - s->dma_adc.count = s->dma_adc.total_bytes = - s->dma_adc.blocks = s->dma_dac.wakeup = 0; - s->dma_adc.swptr = s->dma_adc.hwptr = - (int)(((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) - - s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t)); - } - return 0; - - case SNDCTL_DSP_SPEED: - if (get_user(val, (int *) arg)) - return -EFAULT; - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_SPEED val=%d -> 48000\n", val)); - val = 48000; - return put_user(val, (int *) arg); - - case SNDCTL_DSP_STEREO: - if (get_user(val, (int *) arg)) - return -EFAULT; - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_STEREO val=%d\n", val)); - if (file->f_mode & FMODE_READ) { - stop_adc(s); - s->dma_adc.ready = 0; - s->prop_adc.channels = val ? 2 : 1; - } - if (file->f_mode & FMODE_WRITE) { - stop_dac(s); - s->dma_dac.ready = 0; - s->prop_dac.channels = val ? 2 : 1; - } - return 0; - - case SNDCTL_DSP_CHANNELS: - if (get_user(val, (int *) arg)) - return -EFAULT; - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_CHANNELS val=%d\n", - val)); - if (val != 0) { - if (file->f_mode & FMODE_READ) { - stop_adc(s); - s->dma_adc.ready = 0; - if (val >= 2) - s->prop_adc.channels = 2; - else - s->prop_adc.channels = 1; - } - if (file->f_mode & FMODE_WRITE) { - stop_dac(s); - s->dma_dac.ready = 0; - if (val >= 2) - s->prop_dac.channels = 2; - else - s->prop_dac.channels = 1; - } - } - - if (file->f_mode & FMODE_WRITE) - val = s->prop_dac.channels; - else if (file->f_mode & FMODE_READ) - val = s->prop_adc.channels; - - return put_user(val, (int *) arg); - - case SNDCTL_DSP_GETFMTS: // Returns a mask - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_GETFMT val=0x%.8x\n", - AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 | - AFMT_U8)); - return put_user(AFMT_S16_LE | AFMT_U16_LE | AFMT_S8 | - AFMT_U8, (int *) arg); - - case SNDCTL_DSP_SETFMT: - if (get_user(val, (int *) arg)) - return -EFAULT; - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_SETFMT val=0x%.8x\n", - val)); - if (val != AFMT_QUERY) { - if (file->f_mode & FMODE_READ) { - stop_adc(s); - s->dma_adc.ready = 0; - if (val != AFMT_S16_LE - && val != AFMT_U16_LE && val != AFMT_S8 - && val != AFMT_U8) - val = AFMT_U8; - s->prop_adc.fmt = val; - s->prop_adc.fmt_original = s->prop_adc.fmt; - } - if (file->f_mode & FMODE_WRITE) { - stop_dac(s); - s->dma_dac.ready = 0; - if (val != AFMT_S16_LE - && val != AFMT_U16_LE && val != AFMT_S8 - && val != AFMT_U8) - val = AFMT_U8; - s->prop_dac.fmt = val; - s->prop_dac.fmt_original = s->prop_dac.fmt; - } - } else { - if (file->f_mode & FMODE_WRITE) - val = s->prop_dac.fmt_original; - else if (file->f_mode & FMODE_READ) - val = s->prop_adc.fmt_original; - } - CS_DBGOUT(CS_IOCTL | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_SETFMT return val=0x%.8x\n", - val)); - return put_user(val, (int *) arg); - - case SNDCTL_DSP_POST: - CS_DBGOUT(CS_IOCTL, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): DSP_POST\n")); - return 0; - - case SNDCTL_DSP_GETTRIGGER: - val = 0; - if (file->f_mode & s->ena & FMODE_READ) - val |= PCM_ENABLE_INPUT; - if (file->f_mode & s->ena & FMODE_WRITE) - val |= PCM_ENABLE_OUTPUT; - return put_user(val, (int *) arg); - - case SNDCTL_DSP_SETTRIGGER: - if (get_user(val, (int *) arg)) - return -EFAULT; - if (file->f_mode & FMODE_READ) { - if (val & PCM_ENABLE_INPUT) { - if (!s->dma_adc.ready - && (ret = prog_dmabuf_adc(s))) - return ret; - start_adc(s); - } else - stop_adc(s); - } - if (file->f_mode & FMODE_WRITE) { - if (val & PCM_ENABLE_OUTPUT) { - if (!s->dma_dac.ready - && (ret = prog_dmabuf_dac(s))) - return ret; - start_dac(s); - } else - stop_dac(s); - } - return 0; - - case SNDCTL_DSP_GETOSPACE: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - if (!s->dma_dac.ready && (val = prog_dmabuf_dac(s))) - return val; - spin_lock_irqsave(&s->lock, flags); - cs4297a_update_ptr(s,CS_FALSE); - abinfo.fragsize = s->dma_dac.fragsize; - if (s->dma_dac.mapped) - abinfo.bytes = s->dma_dac.sbufsz; - else - abinfo.bytes = - s->dma_dac.sbufsz - s->dma_dac.count; - abinfo.fragstotal = s->dma_dac.numfrag; - abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift; - CS_DBGOUT(CS_FUNCTION | CS_PARMS, 4, printk(KERN_INFO - "cs4297a: cs4297a_ioctl(): GETOSPACE .fragsize=%d .bytes=%d .fragstotal=%d .fragments=%d\n", - abinfo.fragsize,abinfo.bytes,abinfo.fragstotal, - abinfo.fragments)); - spin_unlock_irqrestore(&s->lock, flags); - return copy_to_user((void *) arg, &abinfo, - sizeof(abinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETISPACE: - if (!(file->f_mode & FMODE_READ)) - return -EINVAL; - if (!s->dma_adc.ready && (val = prog_dmabuf_adc(s))) - return val; - spin_lock_irqsave(&s->lock, flags); - cs4297a_update_ptr(s,CS_FALSE); - if (s->conversion) { - abinfo.fragsize = s->dma_adc.fragsize / 2; - abinfo.bytes = s->dma_adc.count / 2; - abinfo.fragstotal = s->dma_adc.numfrag; - abinfo.fragments = - abinfo.bytes >> (s->dma_adc.fragshift - 1); - } else { - abinfo.fragsize = s->dma_adc.fragsize; - abinfo.bytes = s->dma_adc.count; - abinfo.fragstotal = s->dma_adc.numfrag; - abinfo.fragments = - abinfo.bytes >> s->dma_adc.fragshift; - } - spin_unlock_irqrestore(&s->lock, flags); - return copy_to_user((void *) arg, &abinfo, - sizeof(abinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_NONBLOCK: - spin_lock(&file->f_lock); - file->f_flags |= O_NONBLOCK; - spin_unlock(&file->f_lock); - return 0; - - case SNDCTL_DSP_GETODELAY: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - if(!s->dma_dac.ready && prog_dmabuf_dac(s)) - return 0; - spin_lock_irqsave(&s->lock, flags); - cs4297a_update_ptr(s,CS_FALSE); - val = s->dma_dac.count; - spin_unlock_irqrestore(&s->lock, flags); - return put_user(val, (int *) arg); - - case SNDCTL_DSP_GETIPTR: - if (!(file->f_mode & FMODE_READ)) - return -EINVAL; - if(!s->dma_adc.ready && prog_dmabuf_adc(s)) - return 0; - spin_lock_irqsave(&s->lock, flags); - cs4297a_update_ptr(s,CS_FALSE); - cinfo.bytes = s->dma_adc.total_bytes; - if (s->dma_adc.mapped) { - cinfo.blocks = - (cinfo.bytes >> s->dma_adc.fragshift) - - s->dma_adc.blocks; - s->dma_adc.blocks = - cinfo.bytes >> s->dma_adc.fragshift; - } else { - if (s->conversion) { - cinfo.blocks = - s->dma_adc.count / - 2 >> (s->dma_adc.fragshift - 1); - } else - cinfo.blocks = - s->dma_adc.count >> s->dma_adc. - fragshift; - } - if (s->conversion) - cinfo.ptr = s->dma_adc.hwptr / 2; - else - cinfo.ptr = s->dma_adc.hwptr; - if (s->dma_adc.mapped) - s->dma_adc.count &= s->dma_adc.fragsize - 1; - spin_unlock_irqrestore(&s->lock, flags); - return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETOPTR: - if (!(file->f_mode & FMODE_WRITE)) - return -EINVAL; - if(!s->dma_dac.ready && prog_dmabuf_dac(s)) - return 0; - spin_lock_irqsave(&s->lock, flags); - cs4297a_update_ptr(s,CS_FALSE); - cinfo.bytes = s->dma_dac.total_bytes; - if (s->dma_dac.mapped) { - cinfo.blocks = - (cinfo.bytes >> s->dma_dac.fragshift) - - s->dma_dac.blocks; - s->dma_dac.blocks = - cinfo.bytes >> s->dma_dac.fragshift; - } else { - cinfo.blocks = - s->dma_dac.count >> s->dma_dac.fragshift; - } - cinfo.ptr = s->dma_dac.hwptr; - if (s->dma_dac.mapped) - s->dma_dac.count &= s->dma_dac.fragsize - 1; - spin_unlock_irqrestore(&s->lock, flags); - return copy_to_user((void *) arg, &cinfo, sizeof(cinfo)) ? -EFAULT : 0; - - case SNDCTL_DSP_GETBLKSIZE: - if (file->f_mode & FMODE_WRITE) { - if ((val = prog_dmabuf_dac(s))) - return val; - return put_user(s->dma_dac.fragsize, (int *) arg); - } - if ((val = prog_dmabuf_adc(s))) - return val; - if (s->conversion) - return put_user(s->dma_adc.fragsize / 2, - (int *) arg); - else - return put_user(s->dma_adc.fragsize, (int *) arg); - - case SNDCTL_DSP_SETFRAGMENT: - if (get_user(val, (int *) arg)) - return -EFAULT; - return 0; // Say OK, but do nothing. - - case SNDCTL_DSP_SUBDIVIDE: - if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision) - || (file->f_mode & FMODE_WRITE - && s->dma_dac.subdivision)) return -EINVAL; - if (get_user(val, (int *) arg)) - return -EFAULT; - if (val != 1 && val != 2 && val != 4) - return -EINVAL; - if (file->f_mode & FMODE_READ) - s->dma_adc.subdivision = val; - else if (file->f_mode & FMODE_WRITE) - s->dma_dac.subdivision = val; - return 0; - - case SOUND_PCM_READ_RATE: - if (file->f_mode & FMODE_READ) - return put_user(s->prop_adc.rate, (int *) arg); - else if (file->f_mode & FMODE_WRITE) - return put_user(s->prop_dac.rate, (int *) arg); - - case SOUND_PCM_READ_CHANNELS: - if (file->f_mode & FMODE_READ) - return put_user(s->prop_adc.channels, (int *) arg); - else if (file->f_mode & FMODE_WRITE) - return put_user(s->prop_dac.channels, (int *) arg); - - case SOUND_PCM_READ_BITS: - if (file->f_mode & FMODE_READ) - return - put_user( - (s->prop_adc. - fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16, - (int *) arg); - else if (file->f_mode & FMODE_WRITE) - return - put_user( - (s->prop_dac. - fmt & (AFMT_S8 | AFMT_U8)) ? 8 : 16, - (int *) arg); - - case SOUND_PCM_WRITE_FILTER: - case SNDCTL_DSP_SETSYNCRO: - case SOUND_PCM_READ_FILTER: - return -EINVAL; - } - return mixer_ioctl(s, cmd, arg); -} - -static long cs4297a_unlocked_ioctl(struct file *file, u_int cmd, u_long arg) -{ - int ret; - - mutex_lock(&swarm_cs4297a_mutex); - ret = cs4297a_ioctl(file, cmd, arg); - mutex_unlock(&swarm_cs4297a_mutex); - - return ret; -} - -static int cs4297a_release(struct inode *inode, struct file *file) -{ - struct cs4297a_state *s = - (struct cs4297a_state *) file->private_data; - - CS_DBGOUT(CS_FUNCTION | CS_RELEASE, 2, printk(KERN_INFO - "cs4297a: cs4297a_release(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n", - (unsigned) inode, (unsigned) file, file->f_mode)); - VALIDATE_STATE(s); - - if (file->f_mode & FMODE_WRITE) { - drain_dac(s, file->f_flags & O_NONBLOCK); - mutex_lock(&s->open_sem_dac); - stop_dac(s); - dealloc_dmabuf(s, &s->dma_dac); - s->open_mode &= ~FMODE_WRITE; - mutex_unlock(&s->open_sem_dac); - wake_up(&s->open_wait_dac); - } - if (file->f_mode & FMODE_READ) { - drain_adc(s, file->f_flags & O_NONBLOCK); - mutex_lock(&s->open_sem_adc); - stop_adc(s); - dealloc_dmabuf(s, &s->dma_adc); - s->open_mode &= ~FMODE_READ; - mutex_unlock(&s->open_sem_adc); - wake_up(&s->open_wait_adc); - } - return 0; -} - -static int cs4297a_locked_open(struct inode *inode, struct file *file) -{ - int minor = iminor(inode); - struct cs4297a_state *s=NULL; - struct list_head *entry; - - CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO - "cs4297a: cs4297a_open(): inode=0x%.8x file=0x%.8x f_mode=0x%x\n", - (unsigned) inode, (unsigned) file, file->f_mode)); - CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO - "cs4297a: status = %08x\n", (int)__raw_readq(SS_CSR(R_SER_STATUS_DEBUG)))); - - list_for_each(entry, &cs4297a_devs) - { - s = list_entry(entry, struct cs4297a_state, list); - - if (!((s->dev_audio ^ minor) & ~0xf)) - break; - } - if (entry == &cs4297a_devs) - return -ENODEV; - if (!s) { - CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, printk(KERN_INFO - "cs4297a: cs4297a_open(): Error - unable to find audio state struct\n")); - return -ENODEV; - } - VALIDATE_STATE(s); - file->private_data = s; - - // wait for device to become free - if (!(file->f_mode & (FMODE_WRITE | FMODE_READ))) { - CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2, printk(KERN_INFO - "cs4297a: cs4297a_open(): Error - must open READ and/or WRITE\n")); - return -ENODEV; - } - if (file->f_mode & FMODE_WRITE) { - if (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX)) != 0) { - printk(KERN_ERR "cs4297a: TX pipe needs to drain\n"); - while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_TX))) - ; - } - - mutex_lock(&s->open_sem_dac); - while (s->open_mode & FMODE_WRITE) { - if (file->f_flags & O_NONBLOCK) { - mutex_unlock(&s->open_sem_dac); - return -EBUSY; - } - mutex_unlock(&s->open_sem_dac); - oss_broken_sleep_on(&s->open_wait_dac, MAX_SCHEDULE_TIMEOUT); - - if (signal_pending(current)) { - printk("open - sig pending\n"); - return -ERESTARTSYS; - } - mutex_lock(&s->open_sem_dac); - } - } - if (file->f_mode & FMODE_READ) { - mutex_lock(&s->open_sem_adc); - while (s->open_mode & FMODE_READ) { - if (file->f_flags & O_NONBLOCK) { - mutex_unlock(&s->open_sem_adc); - return -EBUSY; - } - mutex_unlock(&s->open_sem_adc); - oss_broken_sleep_on(&s->open_wait_adc, MAX_SCHEDULE_TIMEOUT); - - if (signal_pending(current)) { - printk("open - sig pending\n"); - return -ERESTARTSYS; - } - mutex_lock(&s->open_sem_adc); - } - } - s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE); - if (file->f_mode & FMODE_READ) { - s->prop_adc.fmt = AFMT_S16_BE; - s->prop_adc.fmt_original = s->prop_adc.fmt; - s->prop_adc.channels = 2; - s->prop_adc.rate = 48000; - s->conversion = 0; - s->ena &= ~FMODE_READ; - s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags = - s->dma_adc.subdivision = 0; - mutex_unlock(&s->open_sem_adc); - - if (prog_dmabuf_adc(s)) { - CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR - "cs4297a: adc Program dmabufs failed.\n")); - cs4297a_release(inode, file); - return -ENOMEM; - } - } - if (file->f_mode & FMODE_WRITE) { - s->prop_dac.fmt = AFMT_S16_BE; - s->prop_dac.fmt_original = s->prop_dac.fmt; - s->prop_dac.channels = 2; - s->prop_dac.rate = 48000; - s->conversion = 0; - s->ena &= ~FMODE_WRITE; - s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags = - s->dma_dac.subdivision = 0; - mutex_unlock(&s->open_sem_dac); - - if (prog_dmabuf_dac(s)) { - CS_DBGOUT(CS_OPEN | CS_ERROR, 2, printk(KERN_ERR - "cs4297a: dac Program dmabufs failed.\n")); - cs4297a_release(inode, file); - return -ENOMEM; - } - } - CS_DBGOUT(CS_FUNCTION | CS_OPEN, 2, - printk(KERN_INFO "cs4297a: cs4297a_open()- 0\n")); - return nonseekable_open(inode, file); -} - -static int cs4297a_open(struct inode *inode, struct file *file) -{ - int ret; - - mutex_lock(&swarm_cs4297a_mutex); - ret = cs4297a_open(inode, file); - mutex_unlock(&swarm_cs4297a_mutex); - - return ret; -} - -// ****************************************************************************************** -// Wave (audio) file operations struct. -// ****************************************************************************************** -static const struct file_operations cs4297a_audio_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = cs4297a_read, - .write = cs4297a_write, - .poll = cs4297a_poll, - .unlocked_ioctl = cs4297a_unlocked_ioctl, - .mmap = cs4297a_mmap, - .open = cs4297a_open, - .release = cs4297a_release, -}; - -static void cs4297a_interrupt(int irq, void *dev_id) -{ - struct cs4297a_state *s = (struct cs4297a_state *) dev_id; - u32 status; - - status = __raw_readq(SS_CSR(R_SER_STATUS_DEBUG)); - - CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO - "cs4297a: cs4297a_interrupt() HISR=0x%.8x\n", status)); - -#if 0 - /* XXXKW what check *should* be done here? */ - if (!(status & (M_SYNCSER_RX_EOP_COUNT | M_SYNCSER_RX_OVERRUN | M_SYNCSER_RX_SYNC_ERR))) { - status = __raw_readq(SS_CSR(R_SER_STATUS)); - printk(KERN_ERR "cs4297a: unexpected interrupt (status %08x)\n", status); - return; - } -#endif - - if (status & M_SYNCSER_RX_SYNC_ERR) { - status = __raw_readq(SS_CSR(R_SER_STATUS)); - printk(KERN_ERR "cs4297a: rx sync error (status %08x)\n", status); - return; - } - - if (status & M_SYNCSER_RX_OVERRUN) { - int newptr, i; - s->stats.rx_ovrrn++; - printk(KERN_ERR "cs4297a: receive FIFO overrun\n"); - - /* Fix things up: get the receive descriptor pool - clean and give them back to the hardware */ - while (__raw_readq(SS_CSR(R_SER_DMA_DSCR_COUNT_RX))) - ; - newptr = (unsigned) (((__raw_readq(SS_CSR(R_SER_DMA_CUR_DSCR_ADDR_RX)) & M_DMA_CURDSCR_ADDR) - - s->dma_adc.descrtab_phys) / sizeof(serdma_descr_t)); - for (i=0; i<DMA_DESCR; i++) { - s->dma_adc.descrtab[i].descr_a &= ~M_DMA_SERRX_SOP; - } - s->dma_adc.swptr = s->dma_adc.hwptr = newptr; - s->dma_adc.count = 0; - s->dma_adc.sb_swptr = s->dma_adc.sb_hwptr = s->dma_adc.sample_buf; - __raw_writeq(DMA_DESCR, SS_CSR(R_SER_DMA_DSCR_COUNT_RX)); - } - - spin_lock(&s->lock); - cs4297a_update_ptr(s,CS_TRUE); - spin_unlock(&s->lock); - - CS_DBGOUT(CS_INTERRUPT, 6, printk(KERN_INFO - "cs4297a: cs4297a_interrupt()-\n")); -} - -#if 0 -static struct initvol { - int mixch; - int vol; -} initvol[] __initdata = { - - {SOUND_MIXER_WRITE_VOLUME, 0x4040}, - {SOUND_MIXER_WRITE_PCM, 0x4040}, - {SOUND_MIXER_WRITE_SYNTH, 0x4040}, - {SOUND_MIXER_WRITE_CD, 0x4040}, - {SOUND_MIXER_WRITE_LINE, 0x4040}, - {SOUND_MIXER_WRITE_LINE1, 0x4040}, - {SOUND_MIXER_WRITE_RECLEV, 0x0000}, - {SOUND_MIXER_WRITE_SPEAKER, 0x4040}, - {SOUND_MIXER_WRITE_MIC, 0x0000} -}; -#endif - -static int __init cs4297a_init(void) -{ - struct cs4297a_state *s; - u32 pwr, id; - mm_segment_t fs; - int rval; - u64 cfg; - int mdio_val; - - CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, printk(KERN_INFO - "cs4297a: cs4297a_init_module()+ \n")); - - mdio_val = __raw_readq(KSEG1 + A_MAC_REGISTER(2, R_MAC_MDIO)) & - (M_MAC_MDIO_DIR|M_MAC_MDIO_OUT); - - /* Check syscfg for synchronous serial on port 1 */ - cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG); - if (!(cfg & M_SYS_SER1_ENABLE)) { - __raw_writeq(cfg | M_SYS_SER1_ENABLE, KSEG1+A_SCD_SYSTEM_CFG); - cfg = __raw_readq(KSEG1 + A_SCD_SYSTEM_CFG); - if (!(cfg & M_SYS_SER1_ENABLE)) { - printk(KERN_INFO "cs4297a: serial port 1 not configured for synchronous operation\n"); - return -1; - } - - printk(KERN_INFO "cs4297a: serial port 1 switching to synchronous operation\n"); - - /* Force the codec (on SWARM) to reset by clearing - GENO, preserving MDIO (no effect on CSWARM) */ - __raw_writeq(mdio_val, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO)); - udelay(10); - } - - /* Now set GENO */ - __raw_writeq(mdio_val | M_MAC_GENC, KSEG1+A_MAC_REGISTER(2, R_MAC_MDIO)); - /* Give the codec some time to finish resetting (start the bit clock) */ - udelay(100); - - if (!(s = kzalloc(sizeof(struct cs4297a_state), GFP_KERNEL))) { - CS_DBGOUT(CS_ERROR, 1, printk(KERN_ERR - "cs4297a: probe() no memory for state struct.\n")); - return -1; - } - s->magic = CS4297a_MAGIC; - init_waitqueue_head(&s->dma_adc.wait); - init_waitqueue_head(&s->dma_dac.wait); - init_waitqueue_head(&s->dma_adc.reg_wait); - init_waitqueue_head(&s->dma_dac.reg_wait); - init_waitqueue_head(&s->open_wait); - init_waitqueue_head(&s->open_wait_adc); - init_waitqueue_head(&s->open_wait_dac); - mutex_init(&s->open_sem_adc); - mutex_init(&s->open_sem_dac); - spin_lock_init(&s->lock); - - s->irq = K_INT_SER_1; - - if (request_irq - (s->irq, cs4297a_interrupt, 0, "Crystal CS4297a", s)) { - CS_DBGOUT(CS_INIT | CS_ERROR, 1, - printk(KERN_ERR "cs4297a: irq %u in use\n", s->irq)); - goto err_irq; - } - if ((s->dev_audio = register_sound_dsp(&cs4297a_audio_fops, -1)) < - 0) { - CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR - "cs4297a: probe() register_sound_dsp() failed.\n")); - goto err_dev1; - } - if ((s->dev_mixer = register_sound_mixer(&cs4297a_mixer_fops, -1)) < - 0) { - CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR - "cs4297a: probe() register_sound_mixer() failed.\n")); - goto err_dev2; - } - - if (ser_init(s) || dma_init(s)) { - CS_DBGOUT(CS_INIT | CS_ERROR, 1, printk(KERN_ERR - "cs4297a: ser_init failed.\n")); - goto err_dev3; - } - - do { - udelay(4000); - rval = cs4297a_read_ac97(s, AC97_POWER_CONTROL, &pwr); - } while (!rval && (pwr != 0xf)); - - if (!rval) { - char *sb1250_duart_present; - - fs = get_fs(); - set_fs(KERNEL_DS); -#if 0 - val = SOUND_MASK_LINE; - mixer_ioctl(s, SOUND_MIXER_WRITE_RECSRC, (unsigned long) &val); - for (i = 0; i < ARRAY_SIZE(initvol); i++) { - val = initvol[i].vol; - mixer_ioctl(s, initvol[i].mixch, (unsigned long) &val); - } -// cs4297a_write_ac97(s, 0x18, 0x0808); -#else - // cs4297a_write_ac97(s, 0x5e, 0x180); - cs4297a_write_ac97(s, 0x02, 0x0808); - cs4297a_write_ac97(s, 0x18, 0x0808); -#endif - set_fs(fs); - - list_add(&s->list, &cs4297a_devs); - - cs4297a_read_ac97(s, AC97_VENDOR_ID1, &id); - - sb1250_duart_present = symbol_get(sb1250_duart_present); - if (sb1250_duart_present) - sb1250_duart_present[1] = 0; - - printk(KERN_INFO "cs4297a: initialized (vendor id = %x)\n", id); - - CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, - printk(KERN_INFO "cs4297a: cs4297a_init_module()-\n")); - - return 0; - } - - err_dev3: - unregister_sound_mixer(s->dev_mixer); - err_dev2: - unregister_sound_dsp(s->dev_audio); - err_dev1: - free_irq(s->irq, s); - err_irq: - kfree(s); - - printk(KERN_INFO "cs4297a: initialization failed\n"); - - return -1; -} - -static void __exit cs4297a_cleanup(void) -{ - /* - XXXKW - disable_irq, free_irq - drain DMA queue - disable DMA - disable TX/RX - free memory - */ - CS_DBGOUT(CS_INIT | CS_FUNCTION, 2, - printk(KERN_INFO "cs4297a: cleanup_cs4297a() finished\n")); -} - -// --------------------------------------------------------------------- - -MODULE_AUTHOR("Kip Walker, Broadcom Corp."); -MODULE_DESCRIPTION("Cirrus Logic CS4297a Driver for Broadcom SWARM board"); - -// --------------------------------------------------------------------- - -module_init(cs4297a_init); -module_exit(cs4297a_cleanup); diff --git a/sound/oss/sys_timer.c b/sound/oss/sys_timer.c deleted file mode 100644 index d17019d25b99..000000000000 --- a/sound/oss/sys_timer.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * sound/oss/sys_timer.c - * - * The default timer for the Level 2 sequencer interface - * Uses the (1/HZ sec) timer of kernel. - */ -/* - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - */ -/* - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Andrew Veliath : adapted tmr2ticks from level 1 sequencer (avoid overflow) - */ -#include <linux/spinlock.h> -#include "sound_config.h" - -static volatile int opened, tmr_running; -static volatile unsigned int tmr_offs, tmr_ctr; -static volatile unsigned long ticks_offs; -static volatile int curr_tempo, curr_timebase; -static volatile unsigned long curr_ticks; -static volatile unsigned long next_event_time; -static unsigned long prev_event_time; - -static void poll_def_tmr(unsigned long dummy); -static DEFINE_SPINLOCK(lock); -static DEFINE_TIMER(def_tmr, poll_def_tmr, 0, 0); - -static unsigned long -tmr2ticks(int tmr_value) -{ - /* - * Convert timer ticks to MIDI ticks - */ - - unsigned long tmp; - unsigned long scale; - - /* tmr_value (ticks per sec) * - 1000000 (usecs per sec) / HZ (ticks per sec) -=> usecs */ - tmp = tmr_value * (1000000 / HZ); - scale = (60 * 1000000) / (curr_tempo * curr_timebase); /* usecs per MIDI tick */ - return (tmp + scale / 2) / scale; -} - -static void -poll_def_tmr(unsigned long dummy) -{ - if (!opened) - return; - def_tmr.expires = (1) + jiffies; - add_timer(&def_tmr); - - if (!tmr_running) - return; - - spin_lock(&lock); - tmr_ctr++; - curr_ticks = ticks_offs + tmr2ticks(tmr_ctr); - - if (curr_ticks >= next_event_time) { - next_event_time = (unsigned long) -1; - sequencer_timer(0); - } - - spin_unlock(&lock); -} - -static void -tmr_reset(void) -{ - unsigned long flags; - - spin_lock_irqsave(&lock,flags); - tmr_offs = 0; - ticks_offs = 0; - tmr_ctr = 0; - next_event_time = (unsigned long) -1; - prev_event_time = 0; - curr_ticks = 0; - spin_unlock_irqrestore(&lock,flags); -} - -static int -def_tmr_open(int dev, int mode) -{ - if (opened) - return -EBUSY; - - tmr_reset(); - curr_tempo = 60; - curr_timebase = 100; - opened = 1; - { - def_tmr.expires = (1) + jiffies; - add_timer(&def_tmr); - } - - return 0; -} - -static void -def_tmr_close(int dev) -{ - opened = tmr_running = 0; - del_timer(&def_tmr); -} - -static int -def_tmr_event(int dev, unsigned char *event) -{ - unsigned char cmd = event[1]; - unsigned long parm = *(int *) &event[4]; - - switch (cmd) - { - case TMR_WAIT_REL: - parm += prev_event_time; - case TMR_WAIT_ABS: - if (parm > 0) - { - long time; - - if (parm <= curr_ticks) /* It's the time */ - return TIMER_NOT_ARMED; - - time = parm; - next_event_time = prev_event_time = time; - - return TIMER_ARMED; - } - break; - - case TMR_START: - tmr_reset(); - tmr_running = 1; - break; - - case TMR_STOP: - tmr_running = 0; - break; - - case TMR_CONTINUE: - tmr_running = 1; - break; - - case TMR_TEMPO: - if (parm) - { - if (parm < 8) - parm = 8; - if (parm > 360) - parm = 360; - tmr_offs = tmr_ctr; - ticks_offs += tmr2ticks(tmr_ctr); - tmr_ctr = 0; - curr_tempo = parm; - } - break; - - case TMR_ECHO: - seq_copy_to_input(event, 8); - break; - - default:; - } - - return TIMER_NOT_ARMED; -} - -static unsigned long -def_tmr_get_time(int dev) -{ - if (!opened) - return 0; - - return curr_ticks; -} - -/* same as sound_timer.c:timer_ioctl!? */ -static int def_tmr_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - int __user *p = arg; - int val; - - switch (cmd) { - case SNDCTL_TMR_SOURCE: - return __put_user(TMR_INTERNAL, p); - - case SNDCTL_TMR_START: - tmr_reset(); - tmr_running = 1; - return 0; - - case SNDCTL_TMR_STOP: - tmr_running = 0; - return 0; - - case SNDCTL_TMR_CONTINUE: - tmr_running = 1; - return 0; - - case SNDCTL_TMR_TIMEBASE: - if (__get_user(val, p)) - return -EFAULT; - if (val) { - if (val < 1) - val = 1; - if (val > 1000) - val = 1000; - curr_timebase = val; - } - return __put_user(curr_timebase, p); - - case SNDCTL_TMR_TEMPO: - if (__get_user(val, p)) - return -EFAULT; - if (val) { - if (val < 8) - val = 8; - if (val > 250) - val = 250; - tmr_offs = tmr_ctr; - ticks_offs += tmr2ticks(tmr_ctr); - tmr_ctr = 0; - curr_tempo = val; - reprogram_timer(); - } - return __put_user(curr_tempo, p); - - case SNDCTL_SEQ_CTRLRATE: - if (__get_user(val, p)) - return -EFAULT; - if (val != 0) /* Can't change */ - return -EINVAL; - val = ((curr_tempo * curr_timebase) + 30) / 60; - return __put_user(val, p); - - case SNDCTL_SEQ_GETTIME: - return __put_user(curr_ticks, p); - - case SNDCTL_TMR_METRONOME: - /* NOP */ - break; - - default:; - } - return -EINVAL; -} - -static void -def_tmr_arm(int dev, long time) -{ - if (time < 0) - time = curr_ticks + 1; - else if (time <= curr_ticks) /* It's the time */ - return; - - next_event_time = prev_event_time = time; - - return; -} - -struct sound_timer_operations default_sound_timer = -{ - .owner = THIS_MODULE, - .info = {"System clock", 0}, - .priority = 0, /* Priority */ - .devlink = 0, /* Local device link */ - .open = def_tmr_open, - .close = def_tmr_close, - .event = def_tmr_event, - .get_time = def_tmr_get_time, - .ioctl = def_tmr_ioctl, - .arm_timer = def_tmr_arm -}; diff --git a/sound/oss/trix.c b/sound/oss/trix.c deleted file mode 100644 index a57bc635d758..000000000000 --- a/sound/oss/trix.c +++ /dev/null @@ -1,525 +0,0 @@ -/* - * sound/oss/trix.c - * - * Low level driver for the MediaTrix AudioTrix Pro - * (MT-0002-PC Control Chip) - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * Changes - * Alan Cox Modularisation, cleanup. - * Christoph Hellwig Adapted to module_init/module_exit - * Arnaldo C. de Melo Got rid of attach_uart401 - */ - -#include <linux/init.h> -#include <linux/module.h> - -#include "sound_config.h" -#include "sb.h" -#include "sound_firmware.h" - -#include "ad1848.h" -#include "mpu401.h" - -#include "trix_boot.h" - -static int mpu; - -static bool joystick; - -static unsigned char trix_read(int addr) -{ - outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */ - return inb(0x391); /* MT-0002-PC ASIC data */ -} - -static void trix_write(int addr, int data) -{ - outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */ - outb(((unsigned char) data), 0x391); /* MT-0002-PC ASIC data */ -} - -static void download_boot(int base) -{ - int i = 0, n = trix_boot_len; - - if (trix_boot_len == 0) - return; - - trix_write(0xf8, 0x00); /* ??????? */ - outb((0x01), base + 6); /* Clear the internal data pointer */ - outb((0x00), base + 6); /* Restart */ - - /* - * Write the boot code to the RAM upload/download register. - * Each write increments the internal data pointer. - */ - outb((0x01), base + 6); /* Clear the internal data pointer */ - outb((0x1A), 0x390); /* Select RAM download/upload port */ - - for (i = 0; i < n; i++) - outb((trix_boot[i]), 0x391); - for (i = n; i < 10016; i++) /* Clear up to first 16 bytes of data RAM */ - outb((0x00), 0x391); - outb((0x00), base + 6); /* Reset */ - outb((0x50), 0x390); /* ?????? */ - -} - -static int trix_set_wss_port(struct address_info *hw_config) -{ - unsigned char addr_bits; - - if (trix_read(0x15) != 0x71) /* No ASIC signature */ - { - MDB(printk(KERN_ERR "No AudioTrix ASIC signature found\n")); - return 0; - } - - /* - * Reset some registers. - */ - - trix_write(0x13, 0); - trix_write(0x14, 0); - - /* - * Configure the ASIC to place the codec to the proper I/O location - */ - - switch (hw_config->io_base) - { - case 0x530: - addr_bits = 0; - break; - case 0x604: - addr_bits = 1; - break; - case 0xE80: - addr_bits = 2; - break; - case 0xF40: - addr_bits = 3; - break; - default: - return 0; - } - - trix_write(0x19, (trix_read(0x19) & 0x03) | addr_bits); - return 1; -} - -/* - * Probe and attach routines for the Windows Sound System mode of - * AudioTrix Pro - */ - -static int __init init_trix_wss(struct address_info *hw_config) -{ - static unsigned char dma_bits[4] = { - 1, 2, 0, 3 - }; - struct resource *ports; - int config_port = hw_config->io_base + 0; - int dma1 = hw_config->dma, dma2 = hw_config->dma2; - int old_num_mixers = num_mixers; - u8 config, bits; - int ret; - - switch(hw_config->irq) { - case 7: - bits = 8; - break; - case 9: - bits = 0x10; - break; - case 10: - bits = 0x18; - break; - case 11: - bits = 0x20; - break; - default: - printk(KERN_ERR "AudioTrix: Bad WSS IRQ %d\n", hw_config->irq); - return 0; - } - - switch (dma1) { - case 0: - case 1: - case 3: - break; - default: - printk(KERN_ERR "AudioTrix: Bad WSS DMA %d\n", dma1); - return 0; - } - - switch (dma2) { - case -1: - case 0: - case 1: - case 3: - break; - default: - printk(KERN_ERR "AudioTrix: Bad capture DMA %d\n", dma2); - return 0; - } - - /* - * Check if the IO port returns valid signature. The original MS Sound - * system returns 0x04 while some cards (AudioTrix Pro for example) - * return 0x00. - */ - ports = request_region(hw_config->io_base + 4, 4, "ad1848"); - if (!ports) { - printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base); - return 0; - } - - if (!request_region(hw_config->io_base, 4, "MSS config")) { - printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base); - release_region(hw_config->io_base + 4, 4); - return 0; - } - - if (!trix_set_wss_port(hw_config)) - goto fail; - - config = inb(hw_config->io_base + 3); - - if ((config & 0x3f) != 0x00) - { - MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x\n", hw_config->io_base)); - goto fail; - } - - /* - * Check that DMA0 is not in use with a 8 bit board. - */ - - if (dma1 == 0 && config & 0x80) - { - printk(KERN_ERR "AudioTrix: Can't use DMA0 with a 8 bit card slot\n"); - goto fail; - } - if (hw_config->irq > 9 && config & 0x80) - { - printk(KERN_ERR "AudioTrix: Can't use IRQ%d with a 8 bit card slot\n", hw_config->irq); - goto fail; - } - - ret = ad1848_detect(ports, NULL, hw_config->osp); - if (!ret) - goto fail; - - if (joystick==1) - trix_write(0x15, 0x80); - - /* - * Set the IRQ and DMA addresses. - */ - - outb((bits | 0x40), config_port); - - if (dma2 == -1 || dma2 == dma1) - { - bits |= dma_bits[dma1]; - dma2 = dma1; - } - else - { - unsigned char tmp; - - tmp = trix_read(0x13) & ~30; - trix_write(0x13, tmp | 0x80 | (dma1 << 4)); - - tmp = trix_read(0x14) & ~30; - trix_write(0x14, tmp | 0x80 | (dma2 << 4)); - } - - outb((bits), config_port); /* Write IRQ+DMA setup */ - - hw_config->slots[0] = ad1848_init("AudioTrix Pro", ports, - hw_config->irq, - dma1, - dma2, - 0, - hw_config->osp, - THIS_MODULE); - - if (num_mixers > old_num_mixers) /* Mixer got installed */ - { - AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); /* Line in */ - AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD); - AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* OPL4 */ - AD1848_REROUTE(SOUND_MIXER_SPEAKER, SOUND_MIXER_ALTPCM); /* SB */ - } - return 1; - -fail: - release_region(hw_config->io_base, 4); - release_region(hw_config->io_base + 4, 4); - return 0; -} - -static int __init probe_trix_sb(struct address_info *hw_config) -{ - - int tmp; - unsigned char conf; - extern int sb_be_quiet; - int old_quiet; - static signed char irq_translate[] = { - -1, -1, -1, 0, 1, 2, -1, 3 - }; - - if (trix_boot_len == 0) - return 0; /* No boot code -> no fun */ - - if ((hw_config->io_base & 0xffffff8f) != 0x200) - return 0; - - tmp = hw_config->irq; - if (tmp > 7) - return 0; - if (irq_translate[tmp] == -1) - return 0; - - tmp = hw_config->dma; - if (tmp != 1 && tmp != 3) - return 0; - - if (!request_region(hw_config->io_base, 16, "soundblaster")) { - printk(KERN_ERR "AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base); - return 0; - } - - conf = 0x84; /* DMA and IRQ enable */ - conf |= hw_config->io_base & 0x70; /* I/O address bits */ - conf |= irq_translate[hw_config->irq]; - if (hw_config->dma == 3) - conf |= 0x08; - trix_write(0x1b, conf); - - download_boot(hw_config->io_base); - - hw_config->name = "AudioTrix SB"; - if (!sb_dsp_detect(hw_config, 0, 0, NULL)) { - release_region(hw_config->io_base, 16); - return 0; - } - - hw_config->driver_use_1 = SB_NO_MIDI | SB_NO_MIXER | SB_NO_RECORDING; - - /* Prevent false alarms */ - old_quiet = sb_be_quiet; - sb_be_quiet = 1; - - sb_dsp_init(hw_config, THIS_MODULE); - - sb_be_quiet = old_quiet; - return 1; -} - -static int __init probe_trix_mpu(struct address_info *hw_config) -{ - unsigned char conf; - static int irq_bits[] = { - -1, -1, -1, 1, 2, 3, -1, 4, -1, 5 - }; - - if (hw_config->irq > 9) - { - printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq); - return 0; - } - if (irq_bits[hw_config->irq] == -1) - { - printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq); - return 0; - } - switch (hw_config->io_base) - { - case 0x330: - conf = 0x00; - break; - case 0x370: - conf = 0x04; - break; - case 0x3b0: - conf = 0x08; - break; - case 0x3f0: - conf = 0x0c; - break; - default: - return 0; /* Invalid port */ - } - - conf |= irq_bits[hw_config->irq] << 4; - trix_write(0x19, (trix_read(0x19) & 0x83) | conf); - hw_config->name = "AudioTrix Pro"; - return probe_uart401(hw_config, THIS_MODULE); -} - -static void __exit unload_trix_wss(struct address_info *hw_config) -{ - int dma2 = hw_config->dma2; - - if (dma2 == -1) - dma2 = hw_config->dma; - - release_region(0x390, 2); - release_region(hw_config->io_base, 4); - - ad1848_unload(hw_config->io_base + 4, - hw_config->irq, - hw_config->dma, - dma2, - 0); - sound_unload_audiodev(hw_config->slots[0]); -} - -static inline void __exit unload_trix_mpu(struct address_info *hw_config) -{ - unload_uart401(hw_config); -} - -static inline void __exit unload_trix_sb(struct address_info *hw_config) -{ - sb_dsp_unload(hw_config, mpu); -} - -static struct address_info cfg; -static struct address_info cfg2; -static struct address_info cfg_mpu; - -static int sb; -static int fw_load; - -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata dma2 = -1; /* Set this for modules that need it */ -static int __initdata sb_io = -1; -static int __initdata sb_dma = -1; -static int __initdata sb_irq = -1; -static int __initdata mpu_io = -1; -static int __initdata mpu_irq = -1; - -module_param_hw(io, int, ioport, 0); -module_param_hw(irq, int, irq, 0); -module_param_hw(dma, int, dma, 0); -module_param_hw(dma2, int, dma, 0); -module_param_hw(sb_io, int, ioport, 0); -module_param_hw(sb_dma, int, dma, 0); -module_param_hw(sb_irq, int, irq, 0); -module_param_hw(mpu_io, int, ioport, 0); -module_param_hw(mpu_irq, int, irq, 0); -module_param(joystick, bool, 0); - -static int __init init_trix(void) -{ - printk(KERN_INFO "MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996\n"); - - cfg.io_base = io; - cfg.irq = irq; - cfg.dma = dma; - cfg.dma2 = dma2; - - cfg2.io_base = sb_io; - cfg2.irq = sb_irq; - cfg2.dma = sb_dma; - - cfg_mpu.io_base = mpu_io; - cfg_mpu.irq = mpu_irq; - - if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { - printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n"); - return -EINVAL; - } - - if (cfg2.io_base != -1 && (cfg2.irq == -1 || cfg2.dma == -1)) { - printk(KERN_INFO "CONFIG_SB_IRQ and CONFIG_SB_DMA must be specified if SB_IO is set.\n"); - return -EINVAL; - } - if (cfg_mpu.io_base != -1 && cfg_mpu.irq == -1) { - printk(KERN_INFO "CONFIG_MPU_IRQ must be specified if MPU_IO is set.\n"); - return -EINVAL; - } - if (!trix_boot) - { - fw_load = 1; - trix_boot_len = mod_firmware_load("/etc/sound/trxpro.bin", - (char **) &trix_boot); - } - - if (!request_region(0x390, 2, "AudioTrix")) { - printk(KERN_ERR "AudioTrix: Config port I/O conflict\n"); - return -ENODEV; - } - - if (!init_trix_wss(&cfg)) { - release_region(0x390, 2); - return -ENODEV; - } - - /* - * We must attach in the right order to get the firmware - * loaded up in time. - */ - - if (cfg2.io_base != -1) { - sb = probe_trix_sb(&cfg2); - } - - if (cfg_mpu.io_base != -1) - mpu = probe_trix_mpu(&cfg_mpu); - - return 0; -} - -static void __exit cleanup_trix(void) -{ - if (fw_load) - vfree(trix_boot); - if (sb) - unload_trix_sb(&cfg2); - if (mpu) - unload_trix_mpu(&cfg_mpu); - unload_trix_wss(&cfg); -} - -module_init(init_trix); -module_exit(cleanup_trix); - -#ifndef MODULE -static int __init setup_trix (char *str) -{ - /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, mpu_io, mpu_irq */ - int ints[9]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - dma2 = ints[4]; - sb_io = ints[5]; - sb_irq = ints[6]; - sb_dma = ints[6]; - mpu_io = ints[7]; - mpu_irq = ints[8]; - - return 1; -} - -__setup("trix=", setup_trix); -#endif -MODULE_LICENSE("GPL"); diff --git a/sound/oss/tuning.h b/sound/oss/tuning.h deleted file mode 100644 index a73e3dd39f9a..000000000000 --- a/sound/oss/tuning.h +++ /dev/null @@ -1,23 +0,0 @@ -static unsigned short semitone_tuning[24] = -{ -/* 0 */ 10000, 10595, 11225, 11892, 12599, 13348, 14142, 14983, -/* 8 */ 15874, 16818, 17818, 18877, 20000, 21189, 22449, 23784, -/* 16 */ 25198, 26697, 28284, 29966, 31748, 33636, 35636, 37755 -}; - -static unsigned short cent_tuning[100] = -{ -/* 0 */ 10000, 10006, 10012, 10017, 10023, 10029, 10035, 10041, -/* 8 */ 10046, 10052, 10058, 10064, 10070, 10075, 10081, 10087, -/* 16 */ 10093, 10099, 10105, 10110, 10116, 10122, 10128, 10134, -/* 24 */ 10140, 10145, 10151, 10157, 10163, 10169, 10175, 10181, -/* 32 */ 10187, 10192, 10198, 10204, 10210, 10216, 10222, 10228, -/* 40 */ 10234, 10240, 10246, 10251, 10257, 10263, 10269, 10275, -/* 48 */ 10281, 10287, 10293, 10299, 10305, 10311, 10317, 10323, -/* 56 */ 10329, 10335, 10341, 10347, 10353, 10359, 10365, 10371, -/* 64 */ 10377, 10383, 10389, 10395, 10401, 10407, 10413, 10419, -/* 72 */ 10425, 10431, 10437, 10443, 10449, 10455, 10461, 10467, -/* 80 */ 10473, 10479, 10485, 10491, 10497, 10503, 10509, 10515, -/* 88 */ 10521, 10528, 10534, 10540, 10546, 10552, 10558, 10564, -/* 96 */ 10570, 10576, 10582, 10589 -}; diff --git a/sound/oss/uart401.c b/sound/oss/uart401.c deleted file mode 100644 index 83dcc85b8688..000000000000 --- a/sound/oss/uart401.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * sound/oss/uart401.c - * - * MPU-401 UART driver (formerly uart401_midi.c) - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * Changes: - * Alan Cox Reformatted, removed sound_mem usage, use normal Linux - * interrupt allocation. Protect against bogus unload - * Fixed to allow IRQ > 15 - * Christoph Hellwig Adapted to module_init/module_exit - * Arnaldo C. de Melo got rid of check_region - * - * Status: - * Untested - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include "sound_config.h" - -#include "mpu401.h" - -struct uart401_devc -{ - int base; - int irq; - int *osp; - void (*midi_input_intr) (int dev, unsigned char data); - int opened, disabled; - volatile unsigned char input_byte; - int my_dev; - int share_irq; - spinlock_t lock; -}; - -#define DATAPORT (devc->base) -#define COMDPORT (devc->base+1) -#define STATPORT (devc->base+1) - -static int uart401_status(struct uart401_devc *devc) -{ - return inb(STATPORT); -} - -#define input_avail(devc) (!(uart401_status(devc)&INPUT_AVAIL)) -#define output_ready(devc) (!(uart401_status(devc)&OUTPUT_READY)) - -static void uart401_cmd(struct uart401_devc *devc, unsigned char cmd) -{ - outb((cmd), COMDPORT); -} - -static int uart401_read(struct uart401_devc *devc) -{ - return inb(DATAPORT); -} - -static void uart401_write(struct uart401_devc *devc, unsigned char byte) -{ - outb((byte), DATAPORT); -} - -#define OUTPUT_READY 0x40 -#define INPUT_AVAIL 0x80 -#define MPU_ACK 0xFE -#define MPU_RESET 0xFF -#define UART_MODE_ON 0x3F - -static int reset_uart401(struct uart401_devc *devc); -static void enter_uart_mode(struct uart401_devc *devc); - -static void uart401_input_loop(struct uart401_devc *devc) -{ - int work_limit=30000; - - while (input_avail(devc) && --work_limit) - { - unsigned char c = uart401_read(devc); - - if (c == MPU_ACK) - devc->input_byte = c; - else if (devc->opened & OPEN_READ && devc->midi_input_intr) - devc->midi_input_intr(devc->my_dev, c); - } - if(work_limit==0) - printk(KERN_WARNING "Too much work in interrupt on uart401 (0x%X). UART jabbering ??\n", devc->base); -} - -irqreturn_t uart401intr(int irq, void *dev_id) -{ - struct uart401_devc *devc = dev_id; - - if (devc == NULL) - { - printk(KERN_ERR "uart401: bad devc\n"); - return IRQ_NONE; - } - - if (input_avail(devc)) - uart401_input_loop(devc); - return IRQ_HANDLED; -} - -static int -uart401_open(int dev, int mode, - void (*input) (int dev, unsigned char data), - void (*output) (int dev) -) -{ - struct uart401_devc *devc = (struct uart401_devc *) - midi_devs[dev]->devc; - - if (devc->opened) - return -EBUSY; - - /* Flush the UART */ - - while (input_avail(devc)) - uart401_read(devc); - - devc->midi_input_intr = input; - devc->opened = mode; - enter_uart_mode(devc); - devc->disabled = 0; - - return 0; -} - -static void uart401_close(int dev) -{ - struct uart401_devc *devc = (struct uart401_devc *) - midi_devs[dev]->devc; - - reset_uart401(devc); - devc->opened = 0; -} - -static int uart401_out(int dev, unsigned char midi_byte) -{ - int timeout; - unsigned long flags; - struct uart401_devc *devc = (struct uart401_devc *) - midi_devs[dev]->devc; - - if (devc->disabled) - return 1; - /* - * Test for input since pending input seems to block the output. - */ - - spin_lock_irqsave(&devc->lock,flags); - if (input_avail(devc)) - uart401_input_loop(devc); - - spin_unlock_irqrestore(&devc->lock,flags); - - /* - * Sometimes it takes about 13000 loops before the output becomes ready - * (After reset). Normally it takes just about 10 loops. - */ - - for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--); - - if (!output_ready(devc)) - { - printk(KERN_WARNING "uart401: Timeout - Device not responding\n"); - devc->disabled = 1; - reset_uart401(devc); - enter_uart_mode(devc); - return 1; - } - uart401_write(devc, midi_byte); - return 1; -} - -static inline int uart401_start_read(int dev) -{ - return 0; -} - -static inline int uart401_end_read(int dev) -{ - return 0; -} - -static inline void uart401_kick(int dev) -{ -} - -static inline int uart401_buffer_status(int dev) -{ - return 0; -} - -#define MIDI_SYNTH_NAME "MPU-401 UART" -#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT -#include "midi_synth.h" - -static const struct midi_operations uart401_operations = -{ - .owner = THIS_MODULE, - .info = {"MPU-401 (UART) MIDI", 0, 0, SNDCARD_MPU401}, - .converter = &std_midi_synth, - .in_info = {0}, - .open = uart401_open, - .close = uart401_close, - .outputc = uart401_out, - .start_read = uart401_start_read, - .end_read = uart401_end_read, - .kick = uart401_kick, - .buffer_status = uart401_buffer_status, -}; - -static void enter_uart_mode(struct uart401_devc *devc) -{ - int ok, timeout; - unsigned long flags; - - spin_lock_irqsave(&devc->lock,flags); - for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--); - - devc->input_byte = 0; - uart401_cmd(devc, UART_MODE_ON); - - ok = 0; - for (timeout = 50000; timeout > 0 && !ok; timeout--) - if (devc->input_byte == MPU_ACK) - ok = 1; - else if (input_avail(devc)) - if (uart401_read(devc) == MPU_ACK) - ok = 1; - - spin_unlock_irqrestore(&devc->lock,flags); -} - -static int reset_uart401(struct uart401_devc *devc) -{ - int ok, timeout, n; - - /* - * Send the RESET command. Try again if no success at the first time. - */ - - ok = 0; - - for (n = 0; n < 2 && !ok; n++) - { - for (timeout = 30000; timeout > 0 && !output_ready(devc); timeout--); - devc->input_byte = 0; - uart401_cmd(devc, MPU_RESET); - - /* - * Wait at least 25 msec. This method is not accurate so let's make the - * loop bit longer. Cannot sleep since this is called during boot. - */ - - for (timeout = 50000; timeout > 0 && !ok; timeout--) - { - if (devc->input_byte == MPU_ACK) /* Interrupt */ - ok = 1; - else if (input_avail(devc)) - { - if (uart401_read(devc) == MPU_ACK) - ok = 1; - } - } - } - - /* Flush input before enabling interrupts */ - if (ok) - uart401_input_loop(devc); - else - DDB(printk("Reset UART401 failed - No hardware detected.\n")); - - return ok; -} - -int probe_uart401(struct address_info *hw_config, struct module *owner) -{ - struct uart401_devc *devc; - char *name = "MPU-401 (UART) MIDI"; - int ok = 0; - unsigned long flags; - - DDB(printk("Entered probe_uart401()\n")); - - /* Default to "not found" */ - hw_config->slots[4] = -1; - - if (!request_region(hw_config->io_base, 4, "MPU-401 UART")) { - printk(KERN_INFO "uart401: could not request_region(%d, 4)\n", hw_config->io_base); - return 0; - } - - devc = kmalloc(sizeof(struct uart401_devc), GFP_KERNEL); - if (!devc) { - printk(KERN_WARNING "uart401: Can't allocate memory\n"); - goto cleanup_region; - } - - devc->base = hw_config->io_base; - devc->irq = hw_config->irq; - devc->osp = hw_config->osp; - devc->midi_input_intr = NULL; - devc->opened = 0; - devc->input_byte = 0; - devc->my_dev = 0; - devc->share_irq = 0; - spin_lock_init(&devc->lock); - - spin_lock_irqsave(&devc->lock,flags); - ok = reset_uart401(devc); - spin_unlock_irqrestore(&devc->lock,flags); - - if (!ok) - goto cleanup_devc; - - if (hw_config->name) - name = hw_config->name; - - if (devc->irq < 0) { - devc->share_irq = 1; - devc->irq *= -1; - } else - devc->share_irq = 0; - - if (!devc->share_irq) - if (request_irq(devc->irq, uart401intr, 0, "MPU-401 UART", devc) < 0) { - printk(KERN_WARNING "uart401: Failed to allocate IRQ%d\n", devc->irq); - devc->share_irq = 1; - } - devc->my_dev = sound_alloc_mididev(); - enter_uart_mode(devc); - - if (devc->my_dev == -1) { - printk(KERN_INFO "uart401: Too many midi devices detected\n"); - goto cleanup_irq; - } - conf_printf(name, hw_config); - midi_devs[devc->my_dev] = kmemdup(&uart401_operations, - sizeof(struct midi_operations), - GFP_KERNEL); - if (!midi_devs[devc->my_dev]) { - printk(KERN_ERR "uart401: Failed to allocate memory\n"); - goto cleanup_unload_mididev; - } - - if (owner) - midi_devs[devc->my_dev]->owner = owner; - - midi_devs[devc->my_dev]->devc = devc; - midi_devs[devc->my_dev]->converter = kmemdup(&std_midi_synth, - sizeof(struct synth_operations), - GFP_KERNEL); - - if (!midi_devs[devc->my_dev]->converter) { - printk(KERN_WARNING "uart401: Failed to allocate memory\n"); - goto cleanup_midi_devs; - } - strcpy(midi_devs[devc->my_dev]->info.name, name); - midi_devs[devc->my_dev]->converter->id = "UART401"; - midi_devs[devc->my_dev]->converter->midi_dev = devc->my_dev; - - if (owner) - midi_devs[devc->my_dev]->converter->owner = owner; - - hw_config->slots[4] = devc->my_dev; - sequencer_init(); - devc->opened = 0; - return 1; -cleanup_midi_devs: - kfree(midi_devs[devc->my_dev]); -cleanup_unload_mididev: - sound_unload_mididev(devc->my_dev); -cleanup_irq: - if (!devc->share_irq) - free_irq(devc->irq, devc); -cleanup_devc: - kfree(devc); -cleanup_region: - release_region(hw_config->io_base, 4); - return 0; -} - -void unload_uart401(struct address_info *hw_config) -{ - struct uart401_devc *devc; - int n=hw_config->slots[4]; - - /* Not set up */ - if(n==-1 || midi_devs[n]==NULL) - return; - - /* Not allocated (erm ??) */ - - devc = midi_devs[hw_config->slots[4]]->devc; - if (devc == NULL) - return; - - reset_uart401(devc); - release_region(hw_config->io_base, 4); - - if (!devc->share_irq) - free_irq(devc->irq, devc); - kfree(midi_devs[devc->my_dev]->converter); - kfree(midi_devs[devc->my_dev]); - kfree(devc); - - /* This kills midi_devs[x] */ - sound_unload_mididev(hw_config->slots[4]); -} - -EXPORT_SYMBOL(probe_uart401); -EXPORT_SYMBOL(unload_uart401); -EXPORT_SYMBOL(uart401intr); - -static struct address_info cfg_mpu; - -static int io = -1; -static int irq = -1; - -module_param_hw(io, int, ioport, 0444); -module_param_hw(irq, int, irq, 0444); - - -static int __init init_uart401(void) -{ - cfg_mpu.irq = irq; - cfg_mpu.io_base = io; - - /* Can be loaded either for module use or to provide functions - to others */ - if (cfg_mpu.io_base != -1 && cfg_mpu.irq != -1) { - printk(KERN_INFO "MPU-401 UART driver Copyright (C) Hannu Savolainen 1993-1997"); - if (!probe_uart401(&cfg_mpu, THIS_MODULE)) - return -ENODEV; - } - - return 0; -} - -static void __exit cleanup_uart401(void) -{ - if (cfg_mpu.io_base != -1 && cfg_mpu.irq != -1) - unload_uart401(&cfg_mpu); -} - -module_init(init_uart401); -module_exit(cleanup_uart401); - -#ifndef MODULE -static int __init setup_uart401(char *str) -{ - /* io, irq */ - int ints[3]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - - return 1; -} - -__setup("uart401=", setup_uart401); -#endif -MODULE_LICENSE("GPL"); diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c deleted file mode 100644 index eda32d7eddbd..000000000000 --- a/sound/oss/uart6850.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * sound/oss/uart6850.c - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * Extended by Alan Cox for Red Hat Software. Now a loadable MIDI driver. - * 28/4/97 - (C) Copyright Alan Cox. Released under the GPL version 2. - * - * Alan Cox: Updated for new modular code. Removed snd_* irq handling. Now - * uses native linux resources - * Christoph Hellwig: Adapted to module_init/module_exit - * Jeff Garzik: Made it work again, in theory - * FIXME: If the request_irq() succeeds, the probe succeeds. Ug. - * - * Status: Testing required (no shit -jgarzik) - * - * - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/spinlock.h> -/* Mon Nov 22 22:38:35 MET 1993 marco@driq.home.usn.nl: - * added 6850 support, used with COVOX SoundMaster II and custom cards. - */ - -#include "sound_config.h" - -static int uart6850_base = 0x330; - -static int *uart6850_osp; - -#define DATAPORT (uart6850_base) -#define COMDPORT (uart6850_base+1) -#define STATPORT (uart6850_base+1) - -static int uart6850_status(void) -{ - return inb(STATPORT); -} - -#define input_avail() (uart6850_status()&INPUT_AVAIL) -#define output_ready() (uart6850_status()&OUTPUT_READY) - -static void uart6850_cmd(unsigned char cmd) -{ - outb(cmd, COMDPORT); -} - -static int uart6850_read(void) -{ - return inb(DATAPORT); -} - -static void uart6850_write(unsigned char byte) -{ - outb(byte, DATAPORT); -} - -#define OUTPUT_READY 0x02 /* Mask for data ready Bit */ -#define INPUT_AVAIL 0x01 /* Mask for Data Send Ready Bit */ - -#define UART_RESET 0x95 -#define UART_MODE_ON 0x03 - -static int uart6850_opened; -static int uart6850_irq; -static int uart6850_detected; -static int my_dev; -static DEFINE_SPINLOCK(lock); - -static void (*midi_input_intr) (int dev, unsigned char data); -static void poll_uart6850(unsigned long dummy); - - -static DEFINE_TIMER(uart6850_timer, poll_uart6850, 0, 0); - -static void uart6850_input_loop(void) -{ - int count = 10; - - while (count) - { - /* - * Not timed out - */ - if (input_avail()) - { - unsigned char c = uart6850_read(); - count = 100; - if (uart6850_opened & OPEN_READ) - midi_input_intr(my_dev, c); - } - else - { - while (!input_avail() && count) - count--; - } - } -} - -static irqreturn_t m6850intr(int irq, void *dev_id) -{ - if (input_avail()) - uart6850_input_loop(); - return IRQ_HANDLED; -} - -/* - * It looks like there is no input interrupts in the UART mode. Let's try - * polling. - */ - -static void poll_uart6850(unsigned long dummy) -{ - unsigned long flags; - - if (!(uart6850_opened & OPEN_READ)) - return; /* Device has been closed */ - - spin_lock_irqsave(&lock,flags); - if (input_avail()) - uart6850_input_loop(); - - uart6850_timer.expires = 1 + jiffies; - add_timer(&uart6850_timer); - - /* - * Come back later - */ - - spin_unlock_irqrestore(&lock,flags); -} - -static int uart6850_open(int dev, int mode, - void (*input) (int dev, unsigned char data), - void (*output) (int dev) -) -{ - if (uart6850_opened) - { -/* printk("Midi6850: Midi busy\n");*/ - return -EBUSY; - } - - uart6850_cmd(UART_RESET); - uart6850_input_loop(); - midi_input_intr = input; - uart6850_opened = mode; - poll_uart6850(0); /* - * Enable input polling - */ - - return 0; -} - -static void uart6850_close(int dev) -{ - uart6850_cmd(UART_MODE_ON); - del_timer(&uart6850_timer); - uart6850_opened = 0; -} - -static int uart6850_out(int dev, unsigned char midi_byte) -{ - int timeout; - unsigned long flags; - - /* - * Test for input since pending input seems to block the output. - */ - - spin_lock_irqsave(&lock,flags); - - if (input_avail()) - uart6850_input_loop(); - - spin_unlock_irqrestore(&lock,flags); - - /* - * Sometimes it takes about 13000 loops before the output becomes ready - * (After reset). Normally it takes just about 10 loops. - */ - - for (timeout = 30000; timeout > 0 && !output_ready(); timeout--); /* - * Wait - */ - if (!output_ready()) - { - printk(KERN_WARNING "Midi6850: Timeout\n"); - return 0; - } - uart6850_write(midi_byte); - return 1; -} - -static inline int uart6850_command(int dev, unsigned char *midi_byte) -{ - return 1; -} - -static inline int uart6850_start_read(int dev) -{ - return 0; -} - -static inline int uart6850_end_read(int dev) -{ - return 0; -} - -static inline void uart6850_kick(int dev) -{ -} - -static inline int uart6850_buffer_status(int dev) -{ - return 0; /* - * No data in buffers - */ -} - -#define MIDI_SYNTH_NAME "6850 UART Midi" -#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT -#include "midi_synth.h" - -static struct midi_operations uart6850_operations = -{ - .owner = THIS_MODULE, - .info = {"6850 UART", 0, 0, SNDCARD_UART6850}, - .converter = &std_midi_synth, - .in_info = {0}, - .open = uart6850_open, - .close = uart6850_close, - .outputc = uart6850_out, - .start_read = uart6850_start_read, - .end_read = uart6850_end_read, - .kick = uart6850_kick, - .command = uart6850_command, - .buffer_status = uart6850_buffer_status -}; - - -static void __init attach_uart6850(struct address_info *hw_config) -{ - int ok, timeout; - unsigned long flags; - - if (!uart6850_detected) - return; - - if ((my_dev = sound_alloc_mididev()) == -1) - { - printk(KERN_INFO "uart6850: Too many midi devices detected\n"); - return; - } - uart6850_base = hw_config->io_base; - uart6850_osp = hw_config->osp; - uart6850_irq = hw_config->irq; - - spin_lock_irqsave(&lock,flags); - - for (timeout = 30000; timeout > 0 && !output_ready(); timeout--); /* - * Wait - */ - uart6850_cmd(UART_MODE_ON); - ok = 1; - spin_unlock_irqrestore(&lock,flags); - - conf_printf("6850 Midi Interface", hw_config); - - std_midi_synth.midi_dev = my_dev; - hw_config->slots[4] = my_dev; - midi_devs[my_dev] = &uart6850_operations; - sequencer_init(); -} - -static inline int reset_uart6850(void) -{ - uart6850_read(); - return 1; /* - * OK - */ -} - -static int __init probe_uart6850(struct address_info *hw_config) -{ - int ok; - - uart6850_osp = hw_config->osp; - uart6850_base = hw_config->io_base; - uart6850_irq = hw_config->irq; - - if (request_irq(uart6850_irq, m6850intr, 0, "MIDI6850", NULL) < 0) - return 0; - - ok = reset_uart6850(); - uart6850_detected = ok; - return ok; -} - -static void __exit unload_uart6850(struct address_info *hw_config) -{ - free_irq(hw_config->irq, NULL); - sound_unload_mididev(hw_config->slots[4]); -} - -static struct address_info cfg_mpu; - -static int __initdata io = -1; -static int __initdata irq = -1; - -module_param_hw(io, int, ioport, 0); -module_param_hw(irq, int, irq, 0); - -static int __init init_uart6850(void) -{ - cfg_mpu.io_base = io; - cfg_mpu.irq = irq; - - if (cfg_mpu.io_base == -1 || cfg_mpu.irq == -1) { - printk(KERN_INFO "uart6850: irq and io must be set.\n"); - return -EINVAL; - } - - if (probe_uart6850(&cfg_mpu)) - return -ENODEV; - attach_uart6850(&cfg_mpu); - - return 0; -} - -static void __exit cleanup_uart6850(void) -{ - unload_uart6850(&cfg_mpu); -} - -module_init(init_uart6850); -module_exit(cleanup_uart6850); - -#ifndef MODULE -static int __init setup_uart6850(char *str) -{ - /* io, irq */ - int ints[3]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - - return 1; -} -__setup("uart6850=", setup_uart6850); -#endif -MODULE_LICENSE("GPL"); diff --git a/sound/oss/ulaw.h b/sound/oss/ulaw.h deleted file mode 100644 index 0ff8c0a3bda0..000000000000 --- a/sound/oss/ulaw.h +++ /dev/null @@ -1,69 +0,0 @@ -static unsigned char ulaw_dsp[] = { - 3, 7, 11, 15, 19, 23, 27, 31, - 35, 39, 43, 47, 51, 55, 59, 63, - 66, 68, 70, 72, 74, 76, 78, 80, - 82, 84, 86, 88, 90, 92, 94, 96, - 98, 99, 100, 101, 102, 103, 104, 105, - 106, 107, 108, 109, 110, 111, 112, 113, - 113, 114, 114, 115, 115, 116, 116, 117, - 117, 118, 118, 119, 119, 120, 120, 121, - 121, 121, 122, 122, 122, 122, 123, 123, - 123, 123, 124, 124, 124, 124, 125, 125, - 125, 125, 125, 125, 126, 126, 126, 126, - 126, 126, 126, 126, 127, 127, 127, 127, - 127, 127, 127, 127, 127, 127, 127, 127, - 128, 128, 128, 128, 128, 128, 128, 128, - 128, 128, 128, 128, 128, 128, 128, 128, - 128, 128, 128, 128, 128, 128, 128, 128, - 253, 249, 245, 241, 237, 233, 229, 225, - 221, 217, 213, 209, 205, 201, 197, 193, - 190, 188, 186, 184, 182, 180, 178, 176, - 174, 172, 170, 168, 166, 164, 162, 160, - 158, 157, 156, 155, 154, 153, 152, 151, - 150, 149, 148, 147, 146, 145, 144, 143, - 143, 142, 142, 141, 141, 140, 140, 139, - 139, 138, 138, 137, 137, 136, 136, 135, - 135, 135, 134, 134, 134, 134, 133, 133, - 133, 133, 132, 132, 132, 132, 131, 131, - 131, 131, 131, 131, 130, 130, 130, 130, - 130, 130, 130, 130, 129, 129, 129, 129, - 129, 129, 129, 129, 129, 129, 129, 129, - 128, 128, 128, 128, 128, 128, 128, 128, - 128, 128, 128, 128, 128, 128, 128, 128, - 128, 128, 128, 128, 128, 128, 128, 128, -}; - -static unsigned char dsp_ulaw[] = { - 0, 0, 0, 0, 0, 1, 1, 1, - 1, 2, 2, 2, 2, 3, 3, 3, - 3, 4, 4, 4, 4, 5, 5, 5, - 5, 6, 6, 6, 6, 7, 7, 7, - 7, 8, 8, 8, 8, 9, 9, 9, - 9, 10, 10, 10, 10, 11, 11, 11, - 11, 12, 12, 12, 12, 13, 13, 13, - 13, 14, 14, 14, 14, 15, 15, 15, - 15, 16, 16, 17, 17, 18, 18, 19, - 19, 20, 20, 21, 21, 22, 22, 23, - 23, 24, 24, 25, 25, 26, 26, 27, - 27, 28, 28, 29, 29, 30, 30, 31, - 31, 32, 33, 34, 35, 36, 37, 38, - 39, 40, 41, 42, 43, 44, 45, 46, - 47, 49, 51, 53, 55, 57, 59, 61, - 63, 66, 70, 74, 78, 84, 92, 104, - 254, 231, 219, 211, 205, 201, 197, 193, - 190, 188, 186, 184, 182, 180, 178, 176, - 175, 174, 173, 172, 171, 170, 169, 168, - 167, 166, 165, 164, 163, 162, 161, 160, - 159, 159, 158, 158, 157, 157, 156, 156, - 155, 155, 154, 154, 153, 153, 152, 152, - 151, 151, 150, 150, 149, 149, 148, 148, - 147, 147, 146, 146, 145, 145, 144, 144, - 143, 143, 143, 143, 142, 142, 142, 142, - 141, 141, 141, 141, 140, 140, 140, 140, - 139, 139, 139, 139, 138, 138, 138, 138, - 137, 137, 137, 137, 136, 136, 136, 136, - 135, 135, 135, 135, 134, 134, 134, 134, - 133, 133, 133, 133, 132, 132, 132, 132, - 131, 131, 131, 131, 130, 130, 130, 130, - 129, 129, 129, 129, 128, 128, 128, 128, -}; diff --git a/sound/oss/v_midi.c b/sound/oss/v_midi.c deleted file mode 100644 index fc0ba276cc8f..000000000000 --- a/sound/oss/v_midi.c +++ /dev/null @@ -1,290 +0,0 @@ -/* - * sound/oss/v_midi.c - * - * The low level driver for the Sound Blaster DS chips. - * - * - * Copyright (C) by Hannu Savolainen 1993-1996 - * - * USS/Lite for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * ?? - * - * Changes - * Alan Cox Modularisation, changed memory allocations - * Christoph Hellwig Adapted to module_init/module_exit - * - * Status - * Untested - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include "sound_config.h" - -#include "v_midi.h" - -static vmidi_devc *v_devc[2] = { NULL, NULL}; -static int midi1,midi2; -static void *midi_mem = NULL; - -/* - * The DSP channel can be used either for input or output. Variable - * 'sb_irq_mode' will be set when the program calls read or write first time - * after open. Current version doesn't support mode changes without closing - * and reopening the device. Support for this feature may be implemented in a - * future version of this driver. - */ - - -static int v_midi_open (int dev, int mode, - void (*input) (int dev, unsigned char data), - void (*output) (int dev) -) -{ - vmidi_devc *devc = midi_devs[dev]->devc; - unsigned long flags; - - if (devc == NULL) - return -ENXIO; - - spin_lock_irqsave(&devc->lock,flags); - if (devc->opened) - { - spin_unlock_irqrestore(&devc->lock,flags); - return -EBUSY; - } - devc->opened = 1; - spin_unlock_irqrestore(&devc->lock,flags); - - devc->intr_active = 1; - - if (mode & OPEN_READ) - { - devc->input_opened = 1; - devc->midi_input_intr = input; - } - - return 0; -} - -static void v_midi_close (int dev) -{ - vmidi_devc *devc = midi_devs[dev]->devc; - unsigned long flags; - - if (devc == NULL) - return; - - spin_lock_irqsave(&devc->lock,flags); - devc->intr_active = 0; - devc->input_opened = 0; - devc->opened = 0; - spin_unlock_irqrestore(&devc->lock,flags); -} - -static int v_midi_out (int dev, unsigned char midi_byte) -{ - vmidi_devc *devc = midi_devs[dev]->devc; - vmidi_devc *pdevc; - - if (devc == NULL) - return -ENXIO; - - pdevc = midi_devs[devc->pair_mididev]->devc; - if (pdevc->input_opened > 0){ - if (MIDIbuf_avail(pdevc->my_mididev) > 500) - return 0; - pdevc->midi_input_intr (pdevc->my_mididev, midi_byte); - } - return 1; -} - -static inline int v_midi_start_read (int dev) -{ - return 0; -} - -static int v_midi_end_read (int dev) -{ - vmidi_devc *devc = midi_devs[dev]->devc; - if (devc == NULL) - return -ENXIO; - - devc->intr_active = 0; - return 0; -} - -/* why -EPERM and not -EINVAL?? */ - -static inline int v_midi_ioctl (int dev, unsigned cmd, void __user *arg) -{ - return -EPERM; -} - - -#define MIDI_SYNTH_NAME "Loopback MIDI" -#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT - -#include "midi_synth.h" - -static struct midi_operations v_midi_operations = -{ - .owner = THIS_MODULE, - .info = {"Loopback MIDI Port 1", 0, 0, SNDCARD_VMIDI}, - .converter = &std_midi_synth, - .in_info = {0}, - .open = v_midi_open, - .close = v_midi_close, - .ioctl = v_midi_ioctl, - .outputc = v_midi_out, - .start_read = v_midi_start_read, - .end_read = v_midi_end_read, -}; - -static struct midi_operations v_midi_operations2 = -{ - .owner = THIS_MODULE, - .info = {"Loopback MIDI Port 2", 0, 0, SNDCARD_VMIDI}, - .converter = &std_midi_synth, - .in_info = {0}, - .open = v_midi_open, - .close = v_midi_close, - .ioctl = v_midi_ioctl, - .outputc = v_midi_out, - .start_read = v_midi_start_read, - .end_read = v_midi_end_read, -}; - -/* - * We kmalloc just one of these - it makes life simpler and the code - * cleaner and the memory handling far more efficient - */ - -struct vmidi_memory -{ - /* Must be first */ - struct midi_operations m_ops[2]; - struct synth_operations s_ops[2]; - struct vmidi_devc v_ops[2]; -}; - -static void __init attach_v_midi (struct address_info *hw_config) -{ - struct vmidi_memory *m; - /* printk("Attaching v_midi device.....\n"); */ - - midi1 = sound_alloc_mididev(); - if (midi1 == -1) - { - printk(KERN_ERR "v_midi: Too many midi devices detected\n"); - return; - } - - m = kmalloc(sizeof(struct vmidi_memory), GFP_KERNEL); - if (m == NULL) - { - printk(KERN_WARNING "Loopback MIDI: Failed to allocate memory\n"); - sound_unload_mididev(midi1); - return; - } - - midi_mem = m; - - midi_devs[midi1] = &m->m_ops[0]; - - - midi2 = sound_alloc_mididev(); - if (midi2 == -1) - { - printk (KERN_ERR "v_midi: Too many midi devices detected\n"); - kfree(m); - sound_unload_mididev(midi1); - return; - } - - midi_devs[midi2] = &m->m_ops[1]; - - /* printk("VMIDI1: %d VMIDI2: %d\n",midi1,midi2); */ - - /* for MIDI-1 */ - v_devc[0] = &m->v_ops[0]; - memcpy ((char *) midi_devs[midi1], (char *) &v_midi_operations, - sizeof (struct midi_operations)); - - v_devc[0]->my_mididev = midi1; - v_devc[0]->pair_mididev = midi2; - v_devc[0]->opened = v_devc[0]->input_opened = 0; - v_devc[0]->intr_active = 0; - v_devc[0]->midi_input_intr = NULL; - spin_lock_init(&v_devc[0]->lock); - - midi_devs[midi1]->devc = v_devc[0]; - - midi_devs[midi1]->converter = &m->s_ops[0]; - std_midi_synth.midi_dev = midi1; - memcpy ((char *) midi_devs[midi1]->converter, (char *) &std_midi_synth, - sizeof (struct synth_operations)); - midi_devs[midi1]->converter->id = "V_MIDI 1"; - - /* for MIDI-2 */ - v_devc[1] = &m->v_ops[1]; - - memcpy ((char *) midi_devs[midi2], (char *) &v_midi_operations2, - sizeof (struct midi_operations)); - - v_devc[1]->my_mididev = midi2; - v_devc[1]->pair_mididev = midi1; - v_devc[1]->opened = v_devc[1]->input_opened = 0; - v_devc[1]->intr_active = 0; - v_devc[1]->midi_input_intr = NULL; - spin_lock_init(&v_devc[1]->lock); - - midi_devs[midi2]->devc = v_devc[1]; - midi_devs[midi2]->converter = &m->s_ops[1]; - - std_midi_synth.midi_dev = midi2; - memcpy ((char *) midi_devs[midi2]->converter, (char *) &std_midi_synth, - sizeof (struct synth_operations)); - midi_devs[midi2]->converter->id = "V_MIDI 2"; - - sequencer_init(); - /* printk("Attached v_midi device\n"); */ -} - -static inline int __init probe_v_midi(struct address_info *hw_config) -{ - return(1); /* always OK */ -} - - -static void __exit unload_v_midi(struct address_info *hw_config) -{ - sound_unload_mididev(midi1); - sound_unload_mididev(midi2); - kfree(midi_mem); -} - -static struct address_info cfg; /* dummy */ - -static int __init init_vmidi(void) -{ - printk("MIDI Loopback device driver\n"); - if (!probe_v_midi(&cfg)) - return -ENODEV; - attach_v_midi(&cfg); - - return 0; -} - -static void __exit cleanup_vmidi(void) -{ - unload_v_midi(&cfg); -} - -module_init(init_vmidi); -module_exit(cleanup_vmidi); -MODULE_LICENSE("GPL"); diff --git a/sound/oss/v_midi.h b/sound/oss/v_midi.h deleted file mode 100644 index 08e2185ee816..000000000000 --- a/sound/oss/v_midi.h +++ /dev/null @@ -1,14 +0,0 @@ -typedef struct vmidi_devc { - int dev; - - /* State variables */ - int opened; - spinlock_t lock; - - /* MIDI fields */ - int my_mididev; - int pair_mididev; - int input_opened; - int intr_active; - void (*midi_input_intr) (int dev, unsigned char data); - } vmidi_devc; diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c deleted file mode 100644 index 92ca5bee1860..000000000000 --- a/sound/oss/vidc.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - * linux/drivers/sound/vidc.c - * - * Copyright (C) 1997-2000 by Russell King <rmk@arm.linux.org.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * VIDC20 audio driver. - * - * The VIDC20 sound hardware consists of the VIDC20 itself, a DAC and a DMA - * engine. The DMA transfers fixed-format (16-bit little-endian linear) - * samples to the VIDC20, which then transfers this data serially to the - * DACs. The samplerate is controlled by the VIDC. - * - * We currently support a mixer device, but it is currently non-functional. - */ - -#include <linux/gfp.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> - -#include <mach/hardware.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/hardware/iomd.h> -#include <asm/irq.h> - -#include "sound_config.h" -#include "vidc.h" - -#ifndef _SIOC_TYPE -#define _SIOC_TYPE(x) _IOC_TYPE(x) -#endif -#ifndef _SIOC_NR -#define _SIOC_NR(x) _IOC_NR(x) -#endif - -#define VIDC_SOUND_CLOCK (250000) -#define VIDC_SOUND_CLOCK_EXT (176400) - -/* - * When using SERIAL SOUND mode (external DAC), the number of physical - * channels is fixed at 2. - */ -static int vidc_busy; -static int vidc_adev; -static int vidc_audio_rate; -static char vidc_audio_format; -static char vidc_audio_channels; - -static unsigned char vidc_level_l[SOUND_MIXER_NRDEVICES] = { - 85, /* master */ - 50, /* bass */ - 50, /* treble */ - 0, /* synth */ - 75, /* pcm */ - 0, /* speaker */ - 100, /* ext line */ - 0, /* mic */ - 100, /* CD */ - 0, -}; - -static unsigned char vidc_level_r[SOUND_MIXER_NRDEVICES] = { - 85, /* master */ - 50, /* bass */ - 50, /* treble */ - 0, /* synth */ - 75, /* pcm */ - 0, /* speaker */ - 100, /* ext line */ - 0, /* mic */ - 100, /* CD */ - 0, -}; - -static unsigned int vidc_audio_volume_l; /* left PCM vol, 0 - 65536 */ -static unsigned int vidc_audio_volume_r; /* right PCM vol, 0 - 65536 */ - -extern void vidc_update_filler(int bits, int channels); -extern int softoss_dev; - -static void -vidc_mixer_set(int mdev, unsigned int level) -{ - unsigned int lev_l = level & 0x007f; - unsigned int lev_r = (level & 0x7f00) >> 8; - unsigned int mlev_l, mlev_r; - - if (lev_l > 100) - lev_l = 100; - if (lev_r > 100) - lev_r = 100; - -#define SCALE(lev,master) ((lev) * (master) * 65536 / 10000) - - mlev_l = vidc_level_l[SOUND_MIXER_VOLUME]; - mlev_r = vidc_level_r[SOUND_MIXER_VOLUME]; - - switch (mdev) { - case SOUND_MIXER_VOLUME: - case SOUND_MIXER_PCM: - vidc_level_l[mdev] = lev_l; - vidc_level_r[mdev] = lev_r; - - vidc_audio_volume_l = SCALE(lev_l, mlev_l); - vidc_audio_volume_r = SCALE(lev_r, mlev_r); -/*printk("VIDC: PCM vol %05X %05X\n", vidc_audio_volume_l, vidc_audio_volume_r);*/ - break; - } -#undef SCALE -} - -static int vidc_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) -{ - unsigned int val; - unsigned int mdev; - - if (_SIOC_TYPE(cmd) != 'M') - return -EINVAL; - - mdev = _SIOC_NR(cmd); - - if (_SIOC_DIR(cmd) & _SIOC_WRITE) { - if (get_user(val, (unsigned int __user *)arg)) - return -EFAULT; - - if (mdev < SOUND_MIXER_NRDEVICES) - vidc_mixer_set(mdev, val); - else - return -EINVAL; - } - - /* - * Return parameters - */ - switch (mdev) { - case SOUND_MIXER_RECSRC: - val = 0; - break; - - case SOUND_MIXER_DEVMASK: - val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH; - break; - - case SOUND_MIXER_STEREODEVS: - val = SOUND_MASK_VOLUME | SOUND_MASK_PCM | SOUND_MASK_SYNTH; - break; - - case SOUND_MIXER_RECMASK: - val = 0; - break; - - case SOUND_MIXER_CAPS: - val = 0; - break; - - default: - if (mdev < SOUND_MIXER_NRDEVICES) - val = vidc_level_l[mdev] | vidc_level_r[mdev] << 8; - else - return -EINVAL; - } - - return put_user(val, (unsigned int __user *)arg) ? -EFAULT : 0; -} - -static unsigned int vidc_audio_set_format(int dev, unsigned int fmt) -{ - switch (fmt) { - default: - fmt = AFMT_S16_LE; - case AFMT_U8: - case AFMT_S8: - case AFMT_S16_LE: - vidc_audio_format = fmt; - vidc_update_filler(vidc_audio_format, vidc_audio_channels); - case AFMT_QUERY: - break; - } - return vidc_audio_format; -} - -#define my_abs(i) ((i)<0 ? -(i) : (i)) - -static int vidc_audio_set_speed(int dev, int rate) -{ - if (rate) { - unsigned int hwctrl, hwrate, hwrate_ext, rate_int, rate_ext; - unsigned int diff_int, diff_ext; - unsigned int newsize, new2size; - - hwctrl = 0x00000003; - - /* Using internal clock */ - hwrate = (((VIDC_SOUND_CLOCK * 2) / rate) + 1) >> 1; - if (hwrate < 3) - hwrate = 3; - if (hwrate > 255) - hwrate = 255; - - /* Using exernal clock */ - hwrate_ext = (((VIDC_SOUND_CLOCK_EXT * 2) / rate) + 1) >> 1; - if (hwrate_ext < 3) - hwrate_ext = 3; - if (hwrate_ext > 255) - hwrate_ext = 255; - - rate_int = VIDC_SOUND_CLOCK / hwrate; - rate_ext = VIDC_SOUND_CLOCK_EXT / hwrate_ext; - - /* Chose between external and internal clock */ - diff_int = my_abs(rate_ext-rate); - diff_ext = my_abs(rate_int-rate); - if (diff_ext < diff_int) { - /*printk("VIDC: external %d %d %d\n", rate, rate_ext, hwrate_ext);*/ - hwrate=hwrate_ext; - hwctrl=0x00000002; - /* Allow roughly 0.4% tolerance */ - if (diff_ext > (rate/256)) - rate=rate_ext; - } else { - /*printk("VIDC: internal %d %d %d\n", rate, rate_int, hwrate);*/ - hwctrl=0x00000003; - /* Allow roughly 0.4% tolerance */ - if (diff_int > (rate/256)) - rate=rate_int; - } - - vidc_writel(0xb0000000 | (hwrate - 2)); - vidc_writel(0xb1000000 | hwctrl); - - newsize = (10000 / hwrate) & ~3; - if (newsize < 208) - newsize = 208; - if (newsize > 4096) - newsize = 4096; - for (new2size = 128; new2size < newsize; new2size <<= 1); - if (new2size - newsize > newsize - (new2size >> 1)) - new2size >>= 1; - if (new2size > 4096) { - printk(KERN_ERR "VIDC: error: dma buffer (%d) %d > 4K\n", - newsize, new2size); - new2size = 4096; - } - /*printk("VIDC: dma size %d\n", new2size);*/ - dma_bufsize = new2size; - vidc_audio_rate = rate; - } - return vidc_audio_rate; -} - -static short vidc_audio_set_channels(int dev, short channels) -{ - switch (channels) { - default: - channels = 2; - case 1: - case 2: - vidc_audio_channels = channels; - vidc_update_filler(vidc_audio_format, vidc_audio_channels); - case 0: - break; - } - return vidc_audio_channels; -} - -/* - * Open the device - */ -static int vidc_audio_open(int dev, int mode) -{ - /* This audio device does not have recording capability */ - if (mode == OPEN_READ) - return -EPERM; - - if (vidc_busy) - return -EBUSY; - - vidc_busy = 1; - return 0; -} - -/* - * Close the device - */ -static void vidc_audio_close(int dev) -{ - vidc_busy = 0; -} - -/* - * Output a block via DMA to sound device. - * - * We just set the DMA start and count; the DMA interrupt routine - * will take care of formatting the samples (via the appropriate - * vidc_filler routine), and flag via vidc_audio_dma_interrupt when - * more data is required. - */ -static void -vidc_audio_output_block(int dev, unsigned long buf, int total_count, int one) -{ - struct dma_buffparms *dmap = audio_devs[dev]->dmap_out; - unsigned long flags; - - local_irq_save(flags); - dma_start = buf - (unsigned long)dmap->raw_buf_phys + (unsigned long)dmap->raw_buf; - dma_count = total_count; - local_irq_restore(flags); -} - -static void -vidc_audio_start_input(int dev, unsigned long buf, int count, int intrflag) -{ -} - -static int vidc_audio_prepare_for_input(int dev, int bsize, int bcount) -{ - return -EINVAL; -} - -static irqreturn_t vidc_audio_dma_interrupt(void) -{ - DMAbuf_outputintr(vidc_adev, 1); - return IRQ_HANDLED; -} - -/* - * Prepare for outputting samples. - * - * Each buffer that will be passed will be `bsize' bytes long, - * with a total of `bcount' buffers. - */ -static int vidc_audio_prepare_for_output(int dev, int bsize, int bcount) -{ - struct audio_operations *adev = audio_devs[dev]; - - dma_interrupt = NULL; - adev->dmap_out->flags |= DMA_NODMA; - - return 0; -} - -/* - * Stop our current operation. - */ -static void vidc_audio_reset(int dev) -{ - dma_interrupt = NULL; -} - -static int vidc_audio_local_qlen(int dev) -{ - return /*dma_count !=*/ 0; -} - -static void vidc_audio_trigger(int dev, int enable_bits) -{ - struct audio_operations *adev = audio_devs[dev]; - - if (enable_bits & PCM_ENABLE_OUTPUT) { - if (!(adev->dmap_out->flags & DMA_ACTIVE)) { - unsigned long flags; - - local_irq_save(flags); - - /* prevent recusion */ - adev->dmap_out->flags |= DMA_ACTIVE; - - dma_interrupt = vidc_audio_dma_interrupt; - vidc_sound_dma_irq(0, NULL); - iomd_writeb(DMA_CR_E | 0x10, IOMD_SD0CR); - - local_irq_restore(flags); - } - } -} - -static struct audio_driver vidc_audio_driver = -{ - .owner = THIS_MODULE, - .open = vidc_audio_open, - .close = vidc_audio_close, - .output_block = vidc_audio_output_block, - .start_input = vidc_audio_start_input, - .prepare_for_input = vidc_audio_prepare_for_input, - .prepare_for_output = vidc_audio_prepare_for_output, - .halt_io = vidc_audio_reset, - .local_qlen = vidc_audio_local_qlen, - .trigger = vidc_audio_trigger, - .set_speed = vidc_audio_set_speed, - .set_bits = vidc_audio_set_format, - .set_channels = vidc_audio_set_channels -}; - -static struct mixer_operations vidc_mixer_operations = { - .owner = THIS_MODULE, - .id = "VIDC", - .name = "VIDCsound", - .ioctl = vidc_mixer_ioctl -}; - -void vidc_update_filler(int format, int channels) -{ -#define TYPE(fmt,ch) (((fmt)<<2) | ((ch)&3)) - - switch (TYPE(format, channels)) { - default: - case TYPE(AFMT_U8, 1): - vidc_filler = vidc_fill_1x8_u; - break; - - case TYPE(AFMT_U8, 2): - vidc_filler = vidc_fill_2x8_u; - break; - - case TYPE(AFMT_S8, 1): - vidc_filler = vidc_fill_1x8_s; - break; - - case TYPE(AFMT_S8, 2): - vidc_filler = vidc_fill_2x8_s; - break; - - case TYPE(AFMT_S16_LE, 1): - vidc_filler = vidc_fill_1x16_s; - break; - - case TYPE(AFMT_S16_LE, 2): - vidc_filler = vidc_fill_2x16_s; - break; - } -} - -static void __init attach_vidc(struct address_info *hw_config) -{ - char name[32]; - int i, adev; - - sprintf(name, "VIDC %d-bit sound", hw_config->card_subtype); - conf_printf(name, hw_config); - memset(dma_buf, 0, sizeof(dma_buf)); - - adev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, name, - &vidc_audio_driver, sizeof(vidc_audio_driver), - DMA_AUTOMODE, AFMT_U8 | AFMT_S8 | AFMT_S16_LE, - NULL, hw_config->dma, hw_config->dma2); - - if (adev < 0) - goto audio_failed; - - /* - * 1024 bytes => 64 buffers - */ - audio_devs[adev]->min_fragment = 10; - audio_devs[adev]->mixer_dev = num_mixers; - - audio_devs[adev]->mixer_dev = - sound_install_mixer(MIXER_DRIVER_VERSION, - name, &vidc_mixer_operations, - sizeof(vidc_mixer_operations), NULL); - - if (audio_devs[adev]->mixer_dev < 0) - goto mixer_failed; - - for (i = 0; i < 2; i++) { - dma_buf[i] = get_zeroed_page(GFP_KERNEL); - if (!dma_buf[i]) { - printk(KERN_ERR "%s: can't allocate required buffers\n", - name); - goto mem_failed; - } - dma_pbuf[i] = virt_to_phys((void *)dma_buf[i]); - } - - if (sound_alloc_dma(hw_config->dma, hw_config->name)) { - printk(KERN_ERR "%s: DMA %d is in use\n", name, hw_config->dma); - goto dma_failed; - } - - if (request_irq(hw_config->irq, vidc_sound_dma_irq, 0, - hw_config->name, &dma_start)) { - printk(KERN_ERR "%s: IRQ %d is in use\n", name, hw_config->irq); - goto irq_failed; - } - vidc_adev = adev; - vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8)); - - return; - -irq_failed: - sound_free_dma(hw_config->dma); -dma_failed: -mem_failed: - for (i = 0; i < 2; i++) - free_page(dma_buf[i]); - sound_unload_mixerdev(audio_devs[adev]->mixer_dev); -mixer_failed: - sound_unload_audiodev(adev); -audio_failed: - return; -} - -static int __init probe_vidc(struct address_info *hw_config) -{ - hw_config->irq = IRQ_DMAS0; - hw_config->dma = DMA_VIRTUAL_SOUND; - hw_config->dma2 = -1; - hw_config->card_subtype = 16; - hw_config->name = "VIDC20"; - return 1; -} - -static void __exit unload_vidc(struct address_info *hw_config) -{ - int i, adev = vidc_adev; - - vidc_adev = -1; - - free_irq(hw_config->irq, &dma_start); - sound_free_dma(hw_config->dma); - - if (adev >= 0) { - sound_unload_mixerdev(audio_devs[adev]->mixer_dev); - sound_unload_audiodev(adev); - for (i = 0; i < 2; i++) - free_page(dma_buf[i]); - } -} - -static struct address_info cfg; - -static int __init init_vidc(void) -{ - if (probe_vidc(&cfg) == 0) - return -ENODEV; - - attach_vidc(&cfg); - - return 0; -} - -static void __exit cleanup_vidc(void) -{ - unload_vidc(&cfg); -} - -module_init(init_vidc); -module_exit(cleanup_vidc); - -MODULE_AUTHOR("Russell King"); -MODULE_DESCRIPTION("VIDC20 audio driver"); -MODULE_LICENSE("GPL"); diff --git a/sound/oss/vidc.h b/sound/oss/vidc.h deleted file mode 100644 index 0d1424751ecd..000000000000 --- a/sound/oss/vidc.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/drivers/sound/vidc.h - * - * Copyright (C) 1997 Russell King <rmk@arm.linux.org.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * VIDC sound function prototypes - */ - -/* vidc_fill.S */ - -/* - * Filler routines for different channels and sample sizes - */ - -extern unsigned long vidc_fill_1x8_u(unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); -extern unsigned long vidc_fill_2x8_u(unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); -extern unsigned long vidc_fill_1x8_s(unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); -extern unsigned long vidc_fill_2x8_s(unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); -extern unsigned long vidc_fill_1x16_s(unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); -extern unsigned long vidc_fill_2x16_s(unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); - -/* - * DMA Interrupt handler - */ - -extern irqreturn_t vidc_sound_dma_irq(int irqnr, void *ref); - -/* - * Filler routine pointer - */ - -extern unsigned long (*vidc_filler) (unsigned long ibuf, unsigned long iend, - unsigned long obuf, int mask); - -/* - * Virtual DMA buffer exhausted - */ - -extern irqreturn_t (*dma_interrupt) (void); - -/* - * Virtual DMA buffer addresses - */ - -extern unsigned long dma_start, dma_count, dma_bufsize; -extern unsigned long dma_buf[2], dma_pbuf[2]; - -/* vidc_synth.c */ - -extern void vidc_synth_init(struct address_info *hw_config); -extern void vidc_synth_exit(struct address_info *hw_config); -extern int vidc_synth_get_volume(void); -extern int vidc_synth_set_volume(int vol); diff --git a/sound/oss/vidc_fill.S b/sound/oss/vidc_fill.S deleted file mode 100644 index bed34921d176..000000000000 --- a/sound/oss/vidc_fill.S +++ /dev/null @@ -1,218 +0,0 @@ -/* - * linux/drivers/sound/vidc_fill.S - * - * Copyright (C) 1997 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Filler routines for DMA buffers - */ -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <mach/hardware.h> -#include <asm/hardware/iomd.h> - - .text - -ENTRY(vidc_fill_1x8_u) - mov ip, #0xff00 -1: cmp r0, r1 - bge vidc_clear - ldrb r4, [r0], #1 - eor r4, r4, #0x80 - and r4, ip, r4, lsl #8 - orr r4, r4, r4, lsl #16 - str r4, [r2], #4 - cmp r2, r3 - blt 1b - mov pc, lr - -ENTRY(vidc_fill_2x8_u) - mov ip, #0xff00 -1: cmp r0, r1 - bge vidc_clear - ldr r4, [r0], #2 - and r5, r4, ip - and r4, ip, r4, lsl #8 - orr r4, r4, r5, lsl #16 - orr r4, r4, r4, lsr #8 - str r4, [r2], #4 - cmp r2, r3 - blt 1b - mov pc, lr - -ENTRY(vidc_fill_1x8_s) - mov ip, #0xff00 -1: cmp r0, r1 - bge vidc_clear - ldrb r4, [r0], #1 - and r4, ip, r4, lsl #8 - orr r4, r4, r4, lsl #16 - str r4, [r2], #4 - cmp r2, r3 - blt 1b - mov pc, lr - -ENTRY(vidc_fill_2x8_s) - mov ip, #0xff00 -1: cmp r0, r1 - bge vidc_clear - ldr r4, [r0], #2 - and r5, r4, ip - and r4, ip, r4, lsl #8 - orr r4, r4, r5, lsl #16 - orr r4, r4, r4, lsr #8 - str r4, [r2], #4 - cmp r2, r3 - blt 1b - mov pc, lr - -ENTRY(vidc_fill_1x16_s) - mov ip, #0xff00 - orr ip, ip, ip, lsr #8 -1: cmp r0, r1 - bge vidc_clear - ldr r5, [r0], #2 - and r4, r5, ip - orr r4, r4, r4, lsl #16 - str r4, [r2], #4 - cmp r0, r1 - addlt r0, r0, #2 - andlt r4, r5, ip, lsl #16 - orrlt r4, r4, r4, lsr #16 - strlt r4, [r2], #4 - cmp r2, r3 - blt 1b - mov pc, lr - -ENTRY(vidc_fill_2x16_s) - mov ip, #0xff00 - orr ip, ip, ip, lsr #8 -1: cmp r0, r1 - bge vidc_clear - ldr r4, [r0], #4 - str r4, [r2], #4 - cmp r0, r1 - ldrlt r4, [r0], #4 - strlt r4, [r2], #4 - cmp r2, r3 - blt 1b - mov pc, lr - -ENTRY(vidc_fill_noaudio) - mov r0, #0 - mov r1, #0 -2: mov r4, #0 - mov r5, #0 -1: cmp r2, r3 - stmltia r2!, {r0, r1, r4, r5} - blt 1b - mov pc, lr - -ENTRY(vidc_clear) - mov r0, #0 - mov r1, #0 - tst r2, #4 - str r0, [r2], #4 - tst r2, #8 - stmia r2!, {r0, r1} - b 2b - -/* - * Call filler routines with: - * r0 = phys address - * r1 = phys end - * r2 = buffer - * Returns: - * r0 = new buffer address - * r2 = new buffer finish - * r4 = corrupted - * r5 = corrupted - * ip = corrupted - */ - -ENTRY(vidc_sound_dma_irq) - stmfd sp!, {r4 - r8, lr} - ldr r8, =dma_start - ldmia r8, {r0, r1, r2, r3, r4, r5} - teq r1, #0 - adreq r4, vidc_fill_noaudio - moveq r7, #1 << 31 - movne r7, #0 - mov ip, #IOMD_BASE & 0xff000000 - orr ip, ip, #IOMD_BASE & 0x00ff0000 - ldrb r6, [ip, #IOMD_SD0ST] - tst r6, #DMA_ST_OFL @ Check for overrun - eorne r6, r6, #DMA_ST_AB - tst r6, #DMA_ST_AB - moveq r2, r3 @ DMAing A, update B - add r3, r2, r5 @ End of DMA buffer - add r1, r1, r0 @ End of virtual DMA buffer - mov lr, pc - mov pc, r4 @ Call fill routine (uses r4, ip) - sub r1, r1, r0 @ Remaining length - stmia r8, {r0, r1} - mov r0, #0 - tst r2, #4 @ Round buffer up to 4 words - strne r0, [r2], #4 - tst r2, #8 - strne r0, [r2], #4 - strne r0, [r2], #4 - sub r2, r2, #16 - mov r2, r2, lsl #20 - movs r2, r2, lsr #20 - orreq r2, r2, #1 << 30 @ Set L bit - orr r2, r2, r7 - ldmdb r8, {r3, r4, r5} - tst r6, #DMA_ST_AB - mov ip, #IOMD_BASE & 0xff000000 - orr ip, ip, #IOMD_BASE & 0x00ff0000 - streq r4, [ip, #IOMD_SD0CURB] - strne r5, [ip, #IOMD_SD0CURA] - streq r2, [ip, #IOMD_SD0ENDB] - strne r2, [ip, #IOMD_SD0ENDA] - ldr lr, [ip, #IOMD_SD0ST] - tst lr, #DMA_ST_OFL - bne 1f - tst r6, #DMA_ST_AB - strne r4, [ip, #IOMD_SD0CURB] - streq r5, [ip, #IOMD_SD0CURA] - strne r2, [ip, #IOMD_SD0ENDB] - streq r2, [ip, #IOMD_SD0ENDA] -1: teq r7, #0 - mov r0, #0x10 - strneb r0, [ip, #IOMD_SD0CR] - ldmfd sp!, {r4 - r8, lr} - mov r0, #1 @ IRQ_HANDLED - teq r1, #0 @ If we have no more - movne pc, lr - teq r3, #0 - movne pc, r3 @ Call interrupt routine - mov pc, lr - - .data - .globl dma_interrupt -dma_interrupt: - .long 0 @ r3 - .globl dma_pbuf -dma_pbuf: - .long 0 @ r4 - .long 0 @ r5 - .globl dma_start -dma_start: - .long 0 @ r0 - .globl dma_count -dma_count: - .long 0 @ r1 - .globl dma_buf -dma_buf: - .long 0 @ r2 - .long 0 @ r3 - .globl vidc_filler -vidc_filler: - .long vidc_fill_noaudio @ r4 - .globl dma_bufsize -dma_bufsize: - .long 0x1000 @ r5 diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c deleted file mode 100644 index 4f0c3a232e41..000000000000 --- a/sound/oss/waveartist.c +++ /dev/null @@ -1,2043 +0,0 @@ -/* - * linux/sound/oss/waveartist.c - * - * The low level driver for the RWA010 Rockwell Wave Artist - * codec chip used in the Rebel.com NetWinder. - * - * Cleaned up and integrated into 2.1 by Russell King (rmk@arm.linux.org.uk) - * and Pat Beirne (patb@corel.ca) - * - * - * Copyright (C) by Rebel.com 1998-1999 - * - * RWA010 specs received under NDA from Rockwell - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * Changes: - * 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> - * Added __init to waveartist_init() - */ - -/* Debugging */ -#define DEBUG_CMD 1 -#define DEBUG_OUT 2 -#define DEBUG_IN 4 -#define DEBUG_INTR 8 -#define DEBUG_MIXER 16 -#define DEBUG_TRIGGER 32 - -#define debug_flg (0) - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> - - -#include "sound_config.h" -#include "waveartist.h" - -#ifdef CONFIG_ARM -#include <mach/hardware.h> -#include <asm/mach-types.h> -#endif - -#ifndef NO_DMA -#define NO_DMA 255 -#endif - -#define SUPPORTED_MIXER_DEVICES (SOUND_MASK_SYNTH |\ - SOUND_MASK_PCM |\ - SOUND_MASK_LINE |\ - SOUND_MASK_MIC |\ - SOUND_MASK_LINE1 |\ - SOUND_MASK_RECLEV |\ - SOUND_MASK_VOLUME |\ - SOUND_MASK_IMIX) - -static unsigned short levels[SOUND_MIXER_NRDEVICES] = { - 0x5555, /* Master Volume */ - 0x0000, /* Bass */ - 0x0000, /* Treble */ - 0x2323, /* Synth (FM) */ - 0x4b4b, /* PCM */ - 0x6464, /* PC Speaker */ - 0x0000, /* Ext Line */ - 0x0000, /* Mic */ - 0x0000, /* CD */ - 0x6464, /* Recording monitor */ - 0x0000, /* SB PCM (ALT PCM) */ - 0x0000, /* Recording level */ - 0x6464, /* Input gain */ - 0x6464, /* Output gain */ - 0x0000, /* Line1 (Aux1) */ - 0x0000, /* Line2 (Aux2) */ - 0x0000, /* Line3 (Aux3) */ - 0x0000, /* Digital1 */ - 0x0000, /* Digital2 */ - 0x0000, /* Digital3 */ - 0x0000, /* Phone In */ - 0x6464, /* Phone Out */ - 0x0000, /* Video */ - 0x0000, /* Radio */ - 0x0000 /* Monitor */ -}; - -struct wavnc_info { - struct address_info hw; /* hardware */ - char *chip_name; - - int xfer_count; - int audio_mode; - int open_mode; - int audio_flags; - int record_dev; - int playback_dev; - int dev_no; - - /* Mixer parameters */ - const struct waveartist_mixer_info *mix; - - unsigned short *levels; /* cache of volume settings */ - int recmask; /* currently enabled recording device! */ - -#ifdef CONFIG_ARCH_NETWINDER - signed int slider_vol; /* hardware slider volume */ - unsigned int handset_detect :1; - unsigned int telephone_detect:1; - unsigned int no_autoselect :1;/* handset/telephone autoselects a path */ - unsigned int spkr_mute_state :1;/* set by ioctl or autoselect */ - unsigned int line_mute_state :1;/* set by ioctl or autoselect */ - unsigned int use_slider :1;/* use slider setting for o/p vol */ -#endif -}; - -/* - * This is the implementation specific mixer information. - */ -struct waveartist_mixer_info { - unsigned int supported_devs; /* Supported devices */ - unsigned int recording_devs; /* Recordable devies */ - unsigned int stereo_devs; /* Stereo devices */ - - unsigned int (*select_input)(struct wavnc_info *, unsigned int, - unsigned char *, unsigned char *); - int (*decode_mixer)(struct wavnc_info *, int, - unsigned char, unsigned char); - int (*get_mixer)(struct wavnc_info *, int); -}; - -struct wavnc_port_info { - int open_mode; - int speed; - int channels; - int audio_format; -}; - -static int nr_waveartist_devs; -static struct wavnc_info adev_info[MAX_AUDIO_DEV]; -static DEFINE_SPINLOCK(waveartist_lock); - -#ifndef CONFIG_ARCH_NETWINDER -#define machine_is_netwinder() 0 -#else -static struct timer_list vnc_timer; -static void vnc_configure_mixer(struct wavnc_info *devc, - unsigned int input_mask); -static int vnc_private_ioctl(int dev, unsigned int cmd, int __user *arg); -static void vnc_slider_tick(unsigned long data); -#endif - -static inline void -waveartist_set_ctlr(struct address_info *hw, unsigned char clear, unsigned char set) -{ - unsigned int ctlr_port = hw->io_base + CTLR; - - clear = ~clear & inb(ctlr_port); - - outb(clear | set, ctlr_port); -} - -/* Toggle IRQ acknowledge line - */ -static inline void -waveartist_iack(struct wavnc_info *devc) -{ - unsigned int ctlr_port = devc->hw.io_base + CTLR; - int old_ctlr; - - old_ctlr = inb(ctlr_port) & ~IRQ_ACK; - - outb(old_ctlr | IRQ_ACK, ctlr_port); - outb(old_ctlr, ctlr_port); -} - -static inline int -waveartist_sleep(int timeout_ms) -{ - unsigned int timeout = msecs_to_jiffies(timeout_ms*100); - return schedule_timeout_interruptible(timeout); -} - -static int -waveartist_reset(struct wavnc_info *devc) -{ - struct address_info *hw = &devc->hw; - unsigned int timeout, res = -1; - - waveartist_set_ctlr(hw, -1, RESET); - waveartist_sleep(2); - waveartist_set_ctlr(hw, RESET, 0); - - timeout = 500; - do { - mdelay(2); - - if (inb(hw->io_base + STATR) & CMD_RF) { - res = inw(hw->io_base + CMDR); - if (res == 0x55aa) - break; - } - } while (--timeout); - - if (timeout == 0) { - printk(KERN_WARNING "WaveArtist: reset timeout "); - if (res != (unsigned int)-1) - printk("(res=%04X)", res); - printk("\n"); - return 1; - } - return 0; -} - -/* Helper function to send and receive words - * from WaveArtist. It handles all the handshaking - * and can send or receive multiple words. - */ -static int -waveartist_cmd(struct wavnc_info *devc, - int nr_cmd, unsigned int *cmd, - int nr_resp, unsigned int *resp) -{ - unsigned int io_base = devc->hw.io_base; - unsigned int timed_out = 0; - unsigned int i; - - if (debug_flg & DEBUG_CMD) { - printk("waveartist_cmd: cmd="); - - for (i = 0; i < nr_cmd; i++) - printk("%04X ", cmd[i]); - - printk("\n"); - } - - if (inb(io_base + STATR) & CMD_RF) { - int old_data; - - /* flush the port - */ - - old_data = inw(io_base + CMDR); - - if (debug_flg & DEBUG_CMD) - printk("flushed %04X...", old_data); - - udelay(10); - } - - for (i = 0; !timed_out && i < nr_cmd; i++) { - int count; - - for (count = 5000; count; count--) - if (inb(io_base + STATR) & CMD_WE) - break; - - if (!count) - timed_out = 1; - else - outw(cmd[i], io_base + CMDR); - } - - for (i = 0; !timed_out && i < nr_resp; i++) { - int count; - - for (count = 5000; count; count--) - if (inb(io_base + STATR) & CMD_RF) - break; - - if (!count) - timed_out = 1; - else - resp[i] = inw(io_base + CMDR); - } - - if (debug_flg & DEBUG_CMD) { - if (!timed_out) { - printk("waveartist_cmd: resp="); - - for (i = 0; i < nr_resp; i++) - printk("%04X ", resp[i]); - - printk("\n"); - } else - printk("waveartist_cmd: timed out\n"); - } - - return timed_out ? 1 : 0; -} - -/* - * Send one command word - */ -static inline int -waveartist_cmd1(struct wavnc_info *devc, unsigned int cmd) -{ - return waveartist_cmd(devc, 1, &cmd, 0, NULL); -} - -/* - * Send one command, receive one word - */ -static inline unsigned int -waveartist_cmd1_r(struct wavnc_info *devc, unsigned int cmd) -{ - unsigned int ret; - - waveartist_cmd(devc, 1, &cmd, 1, &ret); - - return ret; -} - -/* - * Send a double command, receive one - * word (and throw it away) - */ -static inline int -waveartist_cmd2(struct wavnc_info *devc, unsigned int cmd, unsigned int arg) -{ - unsigned int vals[2]; - - vals[0] = cmd; - vals[1] = arg; - - return waveartist_cmd(devc, 2, vals, 1, vals); -} - -/* - * Send a triple command - */ -static inline int -waveartist_cmd3(struct wavnc_info *devc, unsigned int cmd, - unsigned int arg1, unsigned int arg2) -{ - unsigned int vals[3]; - - vals[0] = cmd; - vals[1] = arg1; - vals[2] = arg2; - - return waveartist_cmd(devc, 3, vals, 0, NULL); -} - -static int -waveartist_getrev(struct wavnc_info *devc, char *rev) -{ - unsigned int temp[2]; - unsigned int cmd = WACMD_GETREV; - - waveartist_cmd(devc, 1, &cmd, 2, temp); - - rev[0] = temp[0] >> 8; - rev[1] = temp[0] & 255; - rev[2] = '\0'; - - return temp[0]; -} - -static void waveartist_halt_output(int dev); -static void waveartist_halt_input(int dev); -static void waveartist_halt(int dev); -static void waveartist_trigger(int dev, int state); - -static int -waveartist_open(int dev, int mode) -{ - struct wavnc_info *devc; - struct wavnc_port_info *portc; - unsigned long flags; - - if (dev < 0 || dev >= num_audiodevs) - return -ENXIO; - - devc = (struct wavnc_info *) audio_devs[dev]->devc; - portc = (struct wavnc_port_info *) audio_devs[dev]->portc; - - spin_lock_irqsave(&waveartist_lock, flags); - if (portc->open_mode || (devc->open_mode & mode)) { - spin_unlock_irqrestore(&waveartist_lock, flags); - return -EBUSY; - } - - devc->audio_mode = 0; - devc->open_mode |= mode; - portc->open_mode = mode; - waveartist_trigger(dev, 0); - - if (mode & OPEN_READ) - devc->record_dev = dev; - if (mode & OPEN_WRITE) - devc->playback_dev = dev; - spin_unlock_irqrestore(&waveartist_lock, flags); - - return 0; -} - -static void -waveartist_close(int dev) -{ - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - unsigned long flags; - - spin_lock_irqsave(&waveartist_lock, flags); - - waveartist_halt(dev); - - devc->audio_mode = 0; - devc->open_mode &= ~portc->open_mode; - portc->open_mode = 0; - - spin_unlock_irqrestore(&waveartist_lock, flags); -} - -static void -waveartist_output_block(int dev, unsigned long buf, int __count, int intrflag) -{ - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - unsigned long flags; - unsigned int count = __count; - - if (debug_flg & DEBUG_OUT) - printk("waveartist: output block, buf=0x%lx, count=0x%x...\n", - buf, count); - /* - * 16 bit data - */ - if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) - count >>= 1; - - if (portc->channels > 1) - count >>= 1; - - count -= 1; - - if (devc->audio_mode & PCM_ENABLE_OUTPUT && - audio_devs[dev]->flags & DMA_AUTOMODE && - intrflag && - count == devc->xfer_count) { - devc->audio_mode |= PCM_ENABLE_OUTPUT; - return; /* - * Auto DMA mode on. No need to react - */ - } - - spin_lock_irqsave(&waveartist_lock, flags); - - /* - * set sample count - */ - waveartist_cmd2(devc, WACMD_OUTPUTSIZE, count); - - devc->xfer_count = count; - devc->audio_mode |= PCM_ENABLE_OUTPUT; - - spin_unlock_irqrestore(&waveartist_lock, flags); -} - -static void -waveartist_start_input(int dev, unsigned long buf, int __count, int intrflag) -{ - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - unsigned long flags; - unsigned int count = __count; - - if (debug_flg & DEBUG_IN) - printk("waveartist: start input, buf=0x%lx, count=0x%x...\n", - buf, count); - - if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */ - count >>= 1; - - if (portc->channels > 1) - count >>= 1; - - count -= 1; - - if (devc->audio_mode & PCM_ENABLE_INPUT && - audio_devs[dev]->flags & DMA_AUTOMODE && - intrflag && - count == devc->xfer_count) { - devc->audio_mode |= PCM_ENABLE_INPUT; - return; /* - * Auto DMA mode on. No need to react - */ - } - - spin_lock_irqsave(&waveartist_lock, flags); - - /* - * set sample count - */ - waveartist_cmd2(devc, WACMD_INPUTSIZE, count); - - devc->xfer_count = count; - devc->audio_mode |= PCM_ENABLE_INPUT; - - spin_unlock_irqrestore(&waveartist_lock, flags); -} - -static int -waveartist_ioctl(int dev, unsigned int cmd, void __user * arg) -{ - return -EINVAL; -} - -static unsigned int -waveartist_get_speed(struct wavnc_port_info *portc) -{ - unsigned int speed; - - /* - * program the speed, channels, bits - */ - if (portc->speed == 8000) - speed = 0x2E71; - else if (portc->speed == 11025) - speed = 0x4000; - else if (portc->speed == 22050) - speed = 0x8000; - else if (portc->speed == 44100) - speed = 0x0; - else { - /* - * non-standard - just calculate - */ - speed = portc->speed << 16; - - speed = (speed / 44100) & 65535; - } - - return speed; -} - -static unsigned int -waveartist_get_bits(struct wavnc_port_info *portc) -{ - unsigned int bits; - - if (portc->audio_format == AFMT_S16_LE) - bits = 1; - else if (portc->audio_format == AFMT_S8) - bits = 0; - else - bits = 2; //default AFMT_U8 - - return bits; -} - -static int -waveartist_prepare_for_input(int dev, int bsize, int bcount) -{ - unsigned long flags; - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - unsigned int speed, bits; - - if (devc->audio_mode) - return 0; - - speed = waveartist_get_speed(portc); - bits = waveartist_get_bits(portc); - - spin_lock_irqsave(&waveartist_lock, flags); - - if (waveartist_cmd2(devc, WACMD_INPUTFORMAT, bits)) - printk(KERN_WARNING "waveartist: error setting the " - "record format to %d\n", portc->audio_format); - - if (waveartist_cmd2(devc, WACMD_INPUTCHANNELS, portc->channels)) - printk(KERN_WARNING "waveartist: error setting record " - "to %d channels\n", portc->channels); - - /* - * write cmd SetSampleSpeedTimeConstant - */ - if (waveartist_cmd2(devc, WACMD_INPUTSPEED, speed)) - printk(KERN_WARNING "waveartist: error setting the record " - "speed to %dHz.\n", portc->speed); - - if (waveartist_cmd2(devc, WACMD_INPUTDMA, 1)) - printk(KERN_WARNING "waveartist: error setting the record " - "data path to 0x%X\n", 1); - - if (waveartist_cmd2(devc, WACMD_INPUTFORMAT, bits)) - printk(KERN_WARNING "waveartist: error setting the record " - "format to %d\n", portc->audio_format); - - devc->xfer_count = 0; - spin_unlock_irqrestore(&waveartist_lock, flags); - waveartist_halt_input(dev); - - if (debug_flg & DEBUG_INTR) { - printk("WA CTLR reg: 0x%02X.\n", - inb(devc->hw.io_base + CTLR)); - printk("WA STAT reg: 0x%02X.\n", - inb(devc->hw.io_base + STATR)); - printk("WA IRQS reg: 0x%02X.\n", - inb(devc->hw.io_base + IRQSTAT)); - } - - return 0; -} - -static int -waveartist_prepare_for_output(int dev, int bsize, int bcount) -{ - unsigned long flags; - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - unsigned int speed, bits; - - /* - * program the speed, channels, bits - */ - speed = waveartist_get_speed(portc); - bits = waveartist_get_bits(portc); - - spin_lock_irqsave(&waveartist_lock, flags); - - if (waveartist_cmd2(devc, WACMD_OUTPUTSPEED, speed) && - waveartist_cmd2(devc, WACMD_OUTPUTSPEED, speed)) - printk(KERN_WARNING "waveartist: error setting the playback " - "speed to %dHz.\n", portc->speed); - - if (waveartist_cmd2(devc, WACMD_OUTPUTCHANNELS, portc->channels)) - printk(KERN_WARNING "waveartist: error setting the playback " - "to %d channels\n", portc->channels); - - if (waveartist_cmd2(devc, WACMD_OUTPUTDMA, 0)) - printk(KERN_WARNING "waveartist: error setting the playback " - "data path to 0x%X\n", 0); - - if (waveartist_cmd2(devc, WACMD_OUTPUTFORMAT, bits)) - printk(KERN_WARNING "waveartist: error setting the playback " - "format to %d\n", portc->audio_format); - - devc->xfer_count = 0; - spin_unlock_irqrestore(&waveartist_lock, flags); - waveartist_halt_output(dev); - - if (debug_flg & DEBUG_INTR) { - printk("WA CTLR reg: 0x%02X.\n",inb(devc->hw.io_base + CTLR)); - printk("WA STAT reg: 0x%02X.\n",inb(devc->hw.io_base + STATR)); - printk("WA IRQS reg: 0x%02X.\n",inb(devc->hw.io_base + IRQSTAT)); - } - - return 0; -} - -static void -waveartist_halt(int dev) -{ - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - struct wavnc_info *devc; - - if (portc->open_mode & OPEN_WRITE) - waveartist_halt_output(dev); - - if (portc->open_mode & OPEN_READ) - waveartist_halt_input(dev); - - devc = (struct wavnc_info *) audio_devs[dev]->devc; - devc->audio_mode = 0; -} - -static void -waveartist_halt_input(int dev) -{ - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - unsigned long flags; - - spin_lock_irqsave(&waveartist_lock, flags); - - /* - * Stop capture - */ - waveartist_cmd1(devc, WACMD_INPUTSTOP); - - devc->audio_mode &= ~PCM_ENABLE_INPUT; - - /* - * Clear interrupt by toggling - * the IRQ_ACK bit in CTRL - */ - if (inb(devc->hw.io_base + STATR) & IRQ_REQ) - waveartist_iack(devc); - -// devc->audio_mode &= ~PCM_ENABLE_INPUT; - - spin_unlock_irqrestore(&waveartist_lock, flags); -} - -static void -waveartist_halt_output(int dev) -{ - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - unsigned long flags; - - spin_lock_irqsave(&waveartist_lock, flags); - - waveartist_cmd1(devc, WACMD_OUTPUTSTOP); - - devc->audio_mode &= ~PCM_ENABLE_OUTPUT; - - /* - * Clear interrupt by toggling - * the IRQ_ACK bit in CTRL - */ - if (inb(devc->hw.io_base + STATR) & IRQ_REQ) - waveartist_iack(devc); - -// devc->audio_mode &= ~PCM_ENABLE_OUTPUT; - - spin_unlock_irqrestore(&waveartist_lock, flags); -} - -static void -waveartist_trigger(int dev, int state) -{ - struct wavnc_info *devc = (struct wavnc_info *) - audio_devs[dev]->devc; - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - unsigned long flags; - - if (debug_flg & DEBUG_TRIGGER) { - printk("wavnc: audio trigger "); - if (state & PCM_ENABLE_INPUT) - printk("in "); - if (state & PCM_ENABLE_OUTPUT) - printk("out"); - printk("\n"); - } - - spin_lock_irqsave(&waveartist_lock, flags); - - state &= devc->audio_mode; - - if (portc->open_mode & OPEN_READ && - state & PCM_ENABLE_INPUT) - /* - * enable ADC Data Transfer to PC - */ - waveartist_cmd1(devc, WACMD_INPUTSTART); - - if (portc->open_mode & OPEN_WRITE && - state & PCM_ENABLE_OUTPUT) - /* - * enable DAC data transfer from PC - */ - waveartist_cmd1(devc, WACMD_OUTPUTSTART); - - spin_unlock_irqrestore(&waveartist_lock, flags); -} - -static int -waveartist_set_speed(int dev, int arg) -{ - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - - if (arg <= 0) - return portc->speed; - - if (arg < 5000) - arg = 5000; - if (arg > 44100) - arg = 44100; - - portc->speed = arg; - return portc->speed; - -} - -static short -waveartist_set_channels(int dev, short arg) -{ - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - - if (arg != 1 && arg != 2) - return portc->channels; - - portc->channels = arg; - return arg; -} - -static unsigned int -waveartist_set_bits(int dev, unsigned int arg) -{ - struct wavnc_port_info *portc = (struct wavnc_port_info *) - audio_devs[dev]->portc; - - if (arg == 0) - return portc->audio_format; - - if ((arg != AFMT_U8) && (arg != AFMT_S16_LE) && (arg != AFMT_S8)) - arg = AFMT_U8; - - portc->audio_format = arg; - - return arg; -} - -static struct audio_driver waveartist_audio_driver = { - .owner = THIS_MODULE, - .open = waveartist_open, - .close = waveartist_close, - .output_block = waveartist_output_block, - .start_input = waveartist_start_input, - .ioctl = waveartist_ioctl, - .prepare_for_input = waveartist_prepare_for_input, - .prepare_for_output = waveartist_prepare_for_output, - .halt_io = waveartist_halt, - .halt_input = waveartist_halt_input, - .halt_output = waveartist_halt_output, - .trigger = waveartist_trigger, - .set_speed = waveartist_set_speed, - .set_bits = waveartist_set_bits, - .set_channels = waveartist_set_channels -}; - - -static irqreturn_t -waveartist_intr(int irq, void *dev_id) -{ - struct wavnc_info *devc = dev_id; - int irqstatus, status; - - spin_lock(&waveartist_lock); - irqstatus = inb(devc->hw.io_base + IRQSTAT); - status = inb(devc->hw.io_base + STATR); - - if (debug_flg & DEBUG_INTR) - printk("waveartist_intr: stat=%02x, irqstat=%02x\n", - status, irqstatus); - - if (status & IRQ_REQ) /* Clear interrupt */ - waveartist_iack(devc); - else - printk(KERN_WARNING "waveartist: unexpected interrupt\n"); - - if (irqstatus & 0x01) { - int temp = 1; - - /* PCM buffer done - */ - if ((status & DMA0) && (devc->audio_mode & PCM_ENABLE_OUTPUT)) { - DMAbuf_outputintr(devc->playback_dev, 1); - temp = 0; - } - if ((status & DMA1) && (devc->audio_mode & PCM_ENABLE_INPUT)) { - DMAbuf_inputintr(devc->record_dev); - temp = 0; - } - if (temp) //default: - printk(KERN_WARNING "waveartist: Unknown interrupt\n"); - } - if (irqstatus & 0x2) - // We do not use SB mode natively... - printk(KERN_WARNING "waveartist: Unexpected SB interrupt...\n"); - spin_unlock(&waveartist_lock); - return IRQ_HANDLED; -} - -/* ------------------------------------------------------------------------- - * Mixer stuff - */ -struct mix_ent { - unsigned char reg_l; - unsigned char reg_r; - unsigned char shift; - unsigned char max; -}; - -static const struct mix_ent mix_devs[SOUND_MIXER_NRDEVICES] = { - { 2, 6, 1, 7 }, /* SOUND_MIXER_VOLUME */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_BASS */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_TREBLE */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_SYNTH */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_PCM */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_SPEAKER */ - { 0, 4, 6, 31 }, /* SOUND_MIXER_LINE */ - { 2, 6, 4, 3 }, /* SOUND_MIXER_MIC */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_CD */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_IMIX */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_ALTPCM */ -#if 0 - { 3, 7, 0, 10 }, /* SOUND_MIXER_RECLEV */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_IGAIN */ -#else - { 0, 0, 0, 0 }, /* SOUND_MIXER_RECLEV */ - { 3, 7, 0, 7 }, /* SOUND_MIXER_IGAIN */ -#endif - { 0, 0, 0, 0 }, /* SOUND_MIXER_OGAIN */ - { 0, 4, 1, 31 }, /* SOUND_MIXER_LINE1 */ - { 1, 5, 6, 31 }, /* SOUND_MIXER_LINE2 */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_LINE3 */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_DIGITAL1 */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_DIGITAL2 */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_DIGITAL3 */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_PHONEIN */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_PHONEOUT */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_VIDEO */ - { 0, 0, 0, 0 }, /* SOUND_MIXER_RADIO */ - { 0, 0, 0, 0 } /* SOUND_MIXER_MONITOR */ -}; - -static void -waveartist_mixer_update(struct wavnc_info *devc, int whichDev) -{ - unsigned int lev_left, lev_right; - - lev_left = devc->levels[whichDev] & 0xff; - lev_right = devc->levels[whichDev] >> 8; - - if (lev_left > 100) - lev_left = 100; - if (lev_right > 100) - lev_right = 100; - -#define SCALE(lev,max) ((lev) * (max) / 100) - - if (machine_is_netwinder() && whichDev == SOUND_MIXER_PHONEOUT) - whichDev = SOUND_MIXER_VOLUME; - - if (mix_devs[whichDev].reg_l || mix_devs[whichDev].reg_r) { - const struct mix_ent *mix = mix_devs + whichDev; - unsigned int mask, left, right; - - mask = mix->max << mix->shift; - lev_left = SCALE(lev_left, mix->max) << mix->shift; - lev_right = SCALE(lev_right, mix->max) << mix->shift; - - /* read left setting */ - left = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | - mix->reg_l << 8); - - /* read right setting */ - right = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | - mix->reg_r << 8); - - left = (left & ~mask) | (lev_left & mask); - right = (right & ~mask) | (lev_right & mask); - - /* write left,right back */ - waveartist_cmd3(devc, WACMD_SET_MIXER, left, right); - } else { - switch(whichDev) { - case SOUND_MIXER_PCM: - waveartist_cmd3(devc, WACMD_SET_LEVEL, - SCALE(lev_left, 32767), - SCALE(lev_right, 32767)); - break; - - case SOUND_MIXER_SYNTH: - waveartist_cmd3(devc, 0x0100 | WACMD_SET_LEVEL, - SCALE(lev_left, 32767), - SCALE(lev_right, 32767)); - break; - } - } -} - -/* - * Set the ADC MUX to the specified values. We do NOT do any - * checking of the values passed, since we assume that the - * relevant *_select_input function has done that for us. - */ -static void -waveartist_set_adc_mux(struct wavnc_info *devc, char left_dev, - char right_dev) -{ - unsigned int reg_08, reg_09; - - reg_08 = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | 0x0800); - reg_09 = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | 0x0900); - - reg_08 = (reg_08 & ~0x3f) | right_dev << 3 | left_dev; - - waveartist_cmd3(devc, WACMD_SET_MIXER, reg_08, reg_09); -} - -/* - * Decode a recording mask into a mixer selection as follows: - * - * OSS Source WA Source Actual source - * SOUND_MASK_IMIX Mixer Mixer output (same as AD1848) - * SOUND_MASK_LINE Line Line in - * SOUND_MASK_LINE1 Aux 1 Aux 1 in - * SOUND_MASK_LINE2 Aux 2 Aux 2 in - * SOUND_MASK_MIC Mic Microphone - */ -static unsigned int -waveartist_select_input(struct wavnc_info *devc, unsigned int recmask, - unsigned char *dev_l, unsigned char *dev_r) -{ - unsigned int recdev = ADC_MUX_NONE; - - if (recmask & SOUND_MASK_IMIX) { - recmask = SOUND_MASK_IMIX; - recdev = ADC_MUX_MIXER; - } else if (recmask & SOUND_MASK_LINE2) { - recmask = SOUND_MASK_LINE2; - recdev = ADC_MUX_AUX2; - } else if (recmask & SOUND_MASK_LINE1) { - recmask = SOUND_MASK_LINE1; - recdev = ADC_MUX_AUX1; - } else if (recmask & SOUND_MASK_LINE) { - recmask = SOUND_MASK_LINE; - recdev = ADC_MUX_LINE; - } else if (recmask & SOUND_MASK_MIC) { - recmask = SOUND_MASK_MIC; - recdev = ADC_MUX_MIC; - } - - *dev_l = *dev_r = recdev; - - return recmask; -} - -static int -waveartist_decode_mixer(struct wavnc_info *devc, int dev, - unsigned char lev_l, - unsigned char lev_r) -{ - switch (dev) { - case SOUND_MIXER_VOLUME: - case SOUND_MIXER_SYNTH: - case SOUND_MIXER_PCM: - case SOUND_MIXER_LINE: - case SOUND_MIXER_MIC: - case SOUND_MIXER_IGAIN: - case SOUND_MIXER_LINE1: - case SOUND_MIXER_LINE2: - devc->levels[dev] = lev_l | lev_r << 8; - break; - - case SOUND_MIXER_IMIX: - break; - - default: - dev = -EINVAL; - break; - } - - return dev; -} - -static int waveartist_get_mixer(struct wavnc_info *devc, int dev) -{ - return devc->levels[dev]; -} - -static const struct waveartist_mixer_info waveartist_mixer = { - .supported_devs = SUPPORTED_MIXER_DEVICES | SOUND_MASK_IGAIN, - .recording_devs = SOUND_MASK_LINE | SOUND_MASK_MIC | - SOUND_MASK_LINE1 | SOUND_MASK_LINE2 | - SOUND_MASK_IMIX, - .stereo_devs = (SUPPORTED_MIXER_DEVICES | SOUND_MASK_IGAIN) & ~ - (SOUND_MASK_SPEAKER | SOUND_MASK_IMIX), - .select_input = waveartist_select_input, - .decode_mixer = waveartist_decode_mixer, - .get_mixer = waveartist_get_mixer, -}; - -static void -waveartist_set_recmask(struct wavnc_info *devc, unsigned int recmask) -{ - unsigned char dev_l, dev_r; - - recmask &= devc->mix->recording_devs; - - /* - * If more than one recording device selected, - * disable the device that is currently in use. - */ - if (hweight32(recmask) > 1) - recmask &= ~devc->recmask; - - /* - * Translate the recording device mask into - * the ADC multiplexer settings. - */ - devc->recmask = devc->mix->select_input(devc, recmask, - &dev_l, &dev_r); - - waveartist_set_adc_mux(devc, dev_l, dev_r); -} - -static int -waveartist_set_mixer(struct wavnc_info *devc, int dev, unsigned int level) -{ - unsigned int lev_left = level & 0x00ff; - unsigned int lev_right = (level & 0xff00) >> 8; - - if (lev_left > 100) - lev_left = 100; - if (lev_right > 100) - lev_right = 100; - - /* - * Mono devices have their right volume forced to their - * left volume. (from ALSA driver OSS emulation). - */ - if (!(devc->mix->stereo_devs & (1 << dev))) - lev_right = lev_left; - - dev = devc->mix->decode_mixer(devc, dev, lev_left, lev_right); - - if (dev >= 0) - waveartist_mixer_update(devc, dev); - - return dev < 0 ? dev : 0; -} - -static int -waveartist_mixer_ioctl(int dev, unsigned int cmd, void __user * arg) -{ - struct wavnc_info *devc = (struct wavnc_info *)audio_devs[dev]->devc; - int ret = 0, val, nr; - - /* - * All SOUND_MIXER_* ioctls use type 'M' - */ - if (((cmd >> 8) & 255) != 'M') - return -ENOIOCTLCMD; - -#ifdef CONFIG_ARCH_NETWINDER - if (machine_is_netwinder()) { - ret = vnc_private_ioctl(dev, cmd, arg); - if (ret != -ENOIOCTLCMD) - return ret; - else - ret = 0; - } -#endif - - nr = cmd & 0xff; - - if (_SIOC_DIR(cmd) & _SIOC_WRITE) { - if (get_user(val, (int __user *)arg)) - return -EFAULT; - - switch (nr) { - case SOUND_MIXER_RECSRC: - waveartist_set_recmask(devc, val); - break; - - default: - ret = -EINVAL; - if (nr < SOUND_MIXER_NRDEVICES && - devc->mix->supported_devs & (1 << nr)) - ret = waveartist_set_mixer(devc, nr, val); - } - } - - if (ret == 0 && _SIOC_DIR(cmd) & _SIOC_READ) { - ret = -EINVAL; - - switch (nr) { - case SOUND_MIXER_RECSRC: - ret = devc->recmask; - break; - - case SOUND_MIXER_DEVMASK: - ret = devc->mix->supported_devs; - break; - - case SOUND_MIXER_STEREODEVS: - ret = devc->mix->stereo_devs; - break; - - case SOUND_MIXER_RECMASK: - ret = devc->mix->recording_devs; - break; - - case SOUND_MIXER_CAPS: - ret = SOUND_CAP_EXCL_INPUT; - break; - - default: - if (nr < SOUND_MIXER_NRDEVICES) - ret = devc->mix->get_mixer(devc, nr); - break; - } - - if (ret >= 0) - ret = put_user(ret, (int __user *)arg) ? -EFAULT : 0; - } - - return ret; -} - -static struct mixer_operations waveartist_mixer_operations = -{ - .owner = THIS_MODULE, - .id = "WaveArtist", - .name = "WaveArtist", - .ioctl = waveartist_mixer_ioctl -}; - -static void -waveartist_mixer_reset(struct wavnc_info *devc) -{ - int i; - - if (debug_flg & DEBUG_MIXER) - printk("%s: mixer_reset\n", devc->hw.name); - - /* - * reset mixer cmd - */ - waveartist_cmd1(devc, WACMD_RST_MIXER); - - /* - * set input for ADC to come from 'quiet' - * turn on default modes - */ - waveartist_cmd3(devc, WACMD_SET_MIXER, 0x9800, 0xa836); - - /* - * set mixer input select to none, RX filter gains 0 dB - */ - waveartist_cmd3(devc, WACMD_SET_MIXER, 0x4c00, 0x8c00); - - /* - * set bit 0 reg 2 to 1 - unmute MonoOut - */ - waveartist_cmd3(devc, WACMD_SET_MIXER, 0x2801, 0x6800); - - /* set default input device = internal mic - * current recording device = none - */ - waveartist_set_recmask(devc, 0); - - for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) - waveartist_mixer_update(devc, i); -} - -static int __init waveartist_init(struct wavnc_info *devc) -{ - struct wavnc_port_info *portc; - char rev[3], dev_name[64]; - int my_dev; - - if (waveartist_reset(devc)) - return -ENODEV; - - sprintf(dev_name, "%s (%s", devc->hw.name, devc->chip_name); - - if (waveartist_getrev(devc, rev)) { - strcat(dev_name, " rev. "); - strcat(dev_name, rev); - } - strcat(dev_name, ")"); - - conf_printf2(dev_name, devc->hw.io_base, devc->hw.irq, - devc->hw.dma, devc->hw.dma2); - - portc = kzalloc(sizeof(struct wavnc_port_info), GFP_KERNEL); - if (portc == NULL) - goto nomem; - - my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION, dev_name, - &waveartist_audio_driver, sizeof(struct audio_driver), - devc->audio_flags, AFMT_U8 | AFMT_S16_LE | AFMT_S8, - devc, devc->hw.dma, devc->hw.dma2); - - if (my_dev < 0) - goto free; - - audio_devs[my_dev]->portc = portc; - - waveartist_mixer_reset(devc); - - /* - * clear any pending interrupt - */ - waveartist_iack(devc); - - if (request_irq(devc->hw.irq, waveartist_intr, 0, devc->hw.name, devc) < 0) { - printk(KERN_ERR "%s: IRQ %d in use\n", - devc->hw.name, devc->hw.irq); - goto uninstall; - } - - if (sound_alloc_dma(devc->hw.dma, devc->hw.name)) { - printk(KERN_ERR "%s: Can't allocate DMA%d\n", - devc->hw.name, devc->hw.dma); - goto uninstall_irq; - } - - if (devc->hw.dma != devc->hw.dma2 && devc->hw.dma2 != NO_DMA) - if (sound_alloc_dma(devc->hw.dma2, devc->hw.name)) { - printk(KERN_ERR "%s: can't allocate DMA%d\n", - devc->hw.name, devc->hw.dma2); - goto uninstall_dma; - } - - waveartist_set_ctlr(&devc->hw, 0, DMA1_IE | DMA0_IE); - - audio_devs[my_dev]->mixer_dev = - sound_install_mixer(MIXER_DRIVER_VERSION, - dev_name, - &waveartist_mixer_operations, - sizeof(struct mixer_operations), - devc); - - return my_dev; - -uninstall_dma: - sound_free_dma(devc->hw.dma); - -uninstall_irq: - free_irq(devc->hw.irq, devc); - -uninstall: - sound_unload_audiodev(my_dev); - -free: - kfree(portc); - -nomem: - return -1; -} - -static int __init probe_waveartist(struct address_info *hw_config) -{ - struct wavnc_info *devc = &adev_info[nr_waveartist_devs]; - - if (nr_waveartist_devs >= MAX_AUDIO_DEV) { - printk(KERN_WARNING "waveartist: too many audio devices\n"); - return 0; - } - - if (!request_region(hw_config->io_base, 15, hw_config->name)) { - printk(KERN_WARNING "WaveArtist: I/O port conflict\n"); - return 0; - } - - if (hw_config->irq > 15 || hw_config->irq < 0) { - release_region(hw_config->io_base, 15); - printk(KERN_WARNING "WaveArtist: Bad IRQ %d\n", - hw_config->irq); - return 0; - } - - if (hw_config->dma != 3) { - release_region(hw_config->io_base, 15); - printk(KERN_WARNING "WaveArtist: Bad DMA %d\n", - hw_config->dma); - return 0; - } - - hw_config->name = "WaveArtist"; - devc->hw = *hw_config; - devc->open_mode = 0; - devc->chip_name = "RWA-010"; - - return 1; -} - -static void __init -attach_waveartist(struct address_info *hw, const struct waveartist_mixer_info *mix) -{ - struct wavnc_info *devc = &adev_info[nr_waveartist_devs]; - - /* - * NOTE! If irq < 0, there is another driver which has allocated the - * IRQ so that this driver doesn't need to allocate/deallocate it. - * The actually used IRQ is ABS(irq). - */ - devc->hw = *hw; - devc->hw.irq = (hw->irq > 0) ? hw->irq : 0; - devc->open_mode = 0; - devc->playback_dev = 0; - devc->record_dev = 0; - devc->audio_flags = DMA_AUTOMODE; - devc->levels = levels; - - if (hw->dma != hw->dma2 && hw->dma2 != NO_DMA) - devc->audio_flags |= DMA_DUPLEX; - - devc->mix = mix; - devc->dev_no = waveartist_init(devc); - - if (devc->dev_no < 0) - release_region(hw->io_base, 15); - else { -#ifdef CONFIG_ARCH_NETWINDER - if (machine_is_netwinder()) { - setup_timer(&vnc_timer, vnc_slider_tick, - nr_waveartist_devs); - mod_timer(&vnc_timer, jiffies); - - vnc_configure_mixer(devc, 0); - - devc->no_autoselect = 1; - } -#endif - nr_waveartist_devs += 1; - } -} - -static void __exit unload_waveartist(struct address_info *hw) -{ - struct wavnc_info *devc = NULL; - int i; - - for (i = 0; i < nr_waveartist_devs; i++) - if (hw->io_base == adev_info[i].hw.io_base) { - devc = adev_info + i; - break; - } - - if (devc != NULL) { - int mixer; - -#ifdef CONFIG_ARCH_NETWINDER - if (machine_is_netwinder()) - del_timer(&vnc_timer); -#endif - - release_region(devc->hw.io_base, 15); - - waveartist_set_ctlr(&devc->hw, DMA1_IE|DMA0_IE, 0); - - if (devc->hw.irq >= 0) - free_irq(devc->hw.irq, devc); - - sound_free_dma(devc->hw.dma); - - if (devc->hw.dma != devc->hw.dma2 && - devc->hw.dma2 != NO_DMA) - sound_free_dma(devc->hw.dma2); - - mixer = audio_devs[devc->dev_no]->mixer_dev; - - if (mixer >= 0) - sound_unload_mixerdev(mixer); - - if (devc->dev_no >= 0) - sound_unload_audiodev(devc->dev_no); - - nr_waveartist_devs -= 1; - - for (; i < nr_waveartist_devs; i++) - adev_info[i] = adev_info[i + 1]; - } else - printk(KERN_WARNING "waveartist: can't find device " - "to unload\n"); -} - -#ifdef CONFIG_ARCH_NETWINDER - -/* - * Rebel.com Netwinder specifics... - */ - -#include <asm/hardware/dec21285.h> - -#define VNC_TIMER_PERIOD (HZ/4) //check slider 4 times/sec - -#define MIXER_PRIVATE3_RESET 0x53570000 -#define MIXER_PRIVATE3_READ 0x53570001 -#define MIXER_PRIVATE3_WRITE 0x53570002 - -#define VNC_MUTE_INTERNAL_SPKR 0x01 //the sw mute on/off control bit -#define VNC_MUTE_LINE_OUT 0x10 -#define VNC_PHONE_DETECT 0x20 -#define VNC_HANDSET_DETECT 0x40 -#define VNC_DISABLE_AUTOSWITCH 0x80 - -static inline void -vnc_mute_spkr(struct wavnc_info *devc) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&nw_gpio_lock, flags); - nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE); - raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); -} - -static void -vnc_mute_lout(struct wavnc_info *devc) -{ - unsigned int left, right; - - left = waveartist_cmd1_r(devc, WACMD_GET_LEVEL); - right = waveartist_cmd1_r(devc, WACMD_GET_LEVEL | 0x400); - - if (devc->line_mute_state) { - left &= ~1; - right &= ~1; - } else { - left |= 1; - right |= 1; - } - waveartist_cmd3(devc, WACMD_SET_MIXER, left, right); - -} - -static int -vnc_volume_slider(struct wavnc_info *devc) -{ - static signed int old_slider_volume; - unsigned long flags; - signed int volume = 255; - - *CSR_TIMER1_LOAD = 0x00ffffff; - - spin_lock_irqsave(&waveartist_lock, flags); - - outb(0xFF, 0x201); - *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV1; - - while (volume && (inb(0x201) & 0x01)) - volume--; - - *CSR_TIMER1_CNTL = 0; - - spin_unlock_irqrestore(&waveartist_lock,flags); - - volume = 0x00ffffff - *CSR_TIMER1_VALUE; - - -#ifndef REVERSE - volume = 150 - (volume >> 5); -#else - volume = (volume >> 6) - 25; -#endif - - if (volume < 0) - volume = 0; - - if (volume > 100) - volume = 100; - - /* - * slider quite often reads +-8, so debounce this random noise - */ - if (abs(volume - old_slider_volume) > 7) { - old_slider_volume = volume; - - if (debug_flg & DEBUG_MIXER) - printk(KERN_DEBUG "Slider volume: %d.\n", volume); - } - - return old_slider_volume; -} - -/* - * Decode a recording mask into a mixer selection on the NetWinder - * as follows: - * - * OSS Source WA Source Actual source - * SOUND_MASK_IMIX Mixer Mixer output (same as AD1848) - * SOUND_MASK_LINE Line Line in - * SOUND_MASK_LINE1 Left Mic Handset - * SOUND_MASK_PHONEIN Left Aux Telephone microphone - * SOUND_MASK_MIC Right Mic Builtin microphone - */ -static unsigned int -netwinder_select_input(struct wavnc_info *devc, unsigned int recmask, - unsigned char *dev_l, unsigned char *dev_r) -{ - unsigned int recdev_l = ADC_MUX_NONE, recdev_r = ADC_MUX_NONE; - - if (recmask & SOUND_MASK_IMIX) { - recmask = SOUND_MASK_IMIX; - recdev_l = ADC_MUX_MIXER; - recdev_r = ADC_MUX_MIXER; - } else if (recmask & SOUND_MASK_LINE) { - recmask = SOUND_MASK_LINE; - recdev_l = ADC_MUX_LINE; - recdev_r = ADC_MUX_LINE; - } else if (recmask & SOUND_MASK_LINE1) { - recmask = SOUND_MASK_LINE1; - waveartist_cmd1(devc, WACMD_SET_MONO); /* left */ - recdev_l = ADC_MUX_MIC; - recdev_r = ADC_MUX_NONE; - } else if (recmask & SOUND_MASK_PHONEIN) { - recmask = SOUND_MASK_PHONEIN; - waveartist_cmd1(devc, WACMD_SET_MONO); /* left */ - recdev_l = ADC_MUX_AUX1; - recdev_r = ADC_MUX_NONE; - } else if (recmask & SOUND_MASK_MIC) { - recmask = SOUND_MASK_MIC; - waveartist_cmd1(devc, WACMD_SET_MONO | 0x100); /* right */ - recdev_l = ADC_MUX_NONE; - recdev_r = ADC_MUX_MIC; - } - - *dev_l = recdev_l; - *dev_r = recdev_r; - - return recmask; -} - -static int -netwinder_decode_mixer(struct wavnc_info *devc, int dev, unsigned char lev_l, - unsigned char lev_r) -{ - switch (dev) { - case SOUND_MIXER_VOLUME: - case SOUND_MIXER_SYNTH: - case SOUND_MIXER_PCM: - case SOUND_MIXER_LINE: - case SOUND_MIXER_IGAIN: - devc->levels[dev] = lev_l | lev_r << 8; - break; - - case SOUND_MIXER_MIC: /* right mic only */ - devc->levels[SOUND_MIXER_MIC] &= 0xff; - devc->levels[SOUND_MIXER_MIC] |= lev_l << 8; - break; - - case SOUND_MIXER_LINE1: /* left mic only */ - devc->levels[SOUND_MIXER_MIC] &= 0xff00; - devc->levels[SOUND_MIXER_MIC] |= lev_l; - dev = SOUND_MIXER_MIC; - break; - - case SOUND_MIXER_PHONEIN: /* left aux only */ - devc->levels[SOUND_MIXER_LINE1] = lev_l; - dev = SOUND_MIXER_LINE1; - break; - - case SOUND_MIXER_IMIX: - case SOUND_MIXER_PHONEOUT: - break; - - default: - dev = -EINVAL; - break; - } - return dev; -} - -static int netwinder_get_mixer(struct wavnc_info *devc, int dev) -{ - int levels; - - switch (dev) { - case SOUND_MIXER_VOLUME: - case SOUND_MIXER_SYNTH: - case SOUND_MIXER_PCM: - case SOUND_MIXER_LINE: - case SOUND_MIXER_IGAIN: - levels = devc->levels[dev]; - break; - - case SOUND_MIXER_MIC: /* builtin mic: right mic only */ - levels = devc->levels[SOUND_MIXER_MIC] >> 8; - levels |= levels << 8; - break; - - case SOUND_MIXER_LINE1: /* handset mic: left mic only */ - levels = devc->levels[SOUND_MIXER_MIC] & 0xff; - levels |= levels << 8; - break; - - case SOUND_MIXER_PHONEIN: /* phone mic: left aux1 only */ - levels = devc->levels[SOUND_MIXER_LINE1] & 0xff; - levels |= levels << 8; - break; - - default: - levels = 0; - } - - return levels; -} - -/* - * Waveartist specific mixer information. - */ -static const struct waveartist_mixer_info netwinder_mixer = { - .supported_devs = SOUND_MASK_VOLUME | SOUND_MASK_SYNTH | - SOUND_MASK_PCM | SOUND_MASK_SPEAKER | - SOUND_MASK_LINE | SOUND_MASK_MIC | - SOUND_MASK_IMIX | SOUND_MASK_LINE1 | - SOUND_MASK_PHONEIN | SOUND_MASK_PHONEOUT| - SOUND_MASK_IGAIN, - - .recording_devs = SOUND_MASK_LINE | SOUND_MASK_MIC | - SOUND_MASK_IMIX | SOUND_MASK_LINE1 | - SOUND_MASK_PHONEIN, - - .stereo_devs = SOUND_MASK_VOLUME | SOUND_MASK_SYNTH | - SOUND_MASK_PCM | SOUND_MASK_LINE | - SOUND_MASK_IMIX | SOUND_MASK_IGAIN, - - .select_input = netwinder_select_input, - .decode_mixer = netwinder_decode_mixer, - .get_mixer = netwinder_get_mixer, -}; - -static void -vnc_configure_mixer(struct wavnc_info *devc, unsigned int recmask) -{ - if (!devc->no_autoselect) { - if (devc->handset_detect) { - recmask = SOUND_MASK_LINE1; - devc->spkr_mute_state = devc->line_mute_state = 1; - } else if (devc->telephone_detect) { - recmask = SOUND_MASK_PHONEIN; - devc->spkr_mute_state = devc->line_mute_state = 1; - } else { - /* unless someone has asked for LINE-IN, - * we default to MIC - */ - if ((devc->recmask & SOUND_MASK_LINE) == 0) - devc->recmask = SOUND_MASK_MIC; - devc->spkr_mute_state = devc->line_mute_state = 0; - } - vnc_mute_spkr(devc); - vnc_mute_lout(devc); - - if (recmask != devc->recmask) - waveartist_set_recmask(devc, recmask); - } -} - -static int -vnc_slider(struct wavnc_info *devc) -{ - signed int slider_volume; - unsigned int temp, old_hs, old_td; - - /* - * read the "buttons" state. - * Bit 4 = 0 means handset present - * Bit 5 = 1 means phone offhook - */ - temp = inb(0x201); - - old_hs = devc->handset_detect; - old_td = devc->telephone_detect; - - devc->handset_detect = !(temp & 0x10); - devc->telephone_detect = !!(temp & 0x20); - - if (!devc->no_autoselect && - (old_hs != devc->handset_detect || - old_td != devc->telephone_detect)) - vnc_configure_mixer(devc, devc->recmask); - - slider_volume = vnc_volume_slider(devc); - - /* - * If we're using software controlled volume, and - * the slider moves by more than 20%, then we - * switch back to slider controlled volume. - */ - if (abs(devc->slider_vol - slider_volume) > 20) - devc->use_slider = 1; - - /* - * use only left channel - */ - temp = levels[SOUND_MIXER_VOLUME] & 0xFF; - - if (slider_volume != temp && devc->use_slider) { - devc->slider_vol = slider_volume; - - waveartist_set_mixer(devc, SOUND_MIXER_VOLUME, - slider_volume | slider_volume << 8); - - return 1; - } - - return 0; -} - -static void -vnc_slider_tick(unsigned long data) -{ - int next_timeout; - - if (vnc_slider(adev_info + data)) - next_timeout = 5; // mixer reported change - else - next_timeout = VNC_TIMER_PERIOD; - - mod_timer(&vnc_timer, jiffies + next_timeout); -} - -static int -vnc_private_ioctl(int dev, unsigned int cmd, int __user * arg) -{ - struct wavnc_info *devc = (struct wavnc_info *)audio_devs[dev]->devc; - int val; - - switch (cmd) { - case SOUND_MIXER_PRIVATE1: - { - u_int prev_spkr_mute, prev_line_mute, prev_auto_state; - int val; - - if (get_user(val, arg)) - return -EFAULT; - - /* check if parameter is logical */ - if (val & ~(VNC_MUTE_INTERNAL_SPKR | - VNC_MUTE_LINE_OUT | - VNC_DISABLE_AUTOSWITCH)) - return -EINVAL; - - prev_auto_state = devc->no_autoselect; - prev_spkr_mute = devc->spkr_mute_state; - prev_line_mute = devc->line_mute_state; - - devc->no_autoselect = (val & VNC_DISABLE_AUTOSWITCH) ? 1 : 0; - devc->spkr_mute_state = (val & VNC_MUTE_INTERNAL_SPKR) ? 1 : 0; - devc->line_mute_state = (val & VNC_MUTE_LINE_OUT) ? 1 : 0; - - if (prev_spkr_mute != devc->spkr_mute_state) - vnc_mute_spkr(devc); - - if (prev_line_mute != devc->line_mute_state) - vnc_mute_lout(devc); - - if (prev_auto_state != devc->no_autoselect) - vnc_configure_mixer(devc, devc->recmask); - - return 0; - } - - case SOUND_MIXER_PRIVATE2: - if (get_user(val, arg)) - return -EFAULT; - - switch (val) { -#define VNC_SOUND_PAUSE 0x53 //to pause the DSP -#define VNC_SOUND_RESUME 0x57 //to unpause the DSP - case VNC_SOUND_PAUSE: - waveartist_cmd1(devc, 0x16); - break; - - case VNC_SOUND_RESUME: - waveartist_cmd1(devc, 0x18); - break; - - default: - return -EINVAL; - } - return 0; - - /* private ioctl to allow bulk access to waveartist */ - case SOUND_MIXER_PRIVATE3: - { - unsigned long flags; - int mixer_reg[15], i, val; - - if (get_user(val, arg)) - return -EFAULT; - if (copy_from_user(mixer_reg, (void *)val, sizeof(mixer_reg))) - return -EFAULT; - - switch (mixer_reg[14]) { - case MIXER_PRIVATE3_RESET: - waveartist_mixer_reset(devc); - break; - - case MIXER_PRIVATE3_WRITE: - waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[0], mixer_reg[4]); - waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[1], mixer_reg[5]); - waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[2], mixer_reg[6]); - waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[3], mixer_reg[7]); - waveartist_cmd3(devc, WACMD_SET_MIXER, mixer_reg[8], mixer_reg[9]); - - waveartist_cmd3(devc, WACMD_SET_LEVEL, mixer_reg[10], mixer_reg[11]); - waveartist_cmd3(devc, WACMD_SET_LEVEL, mixer_reg[12], mixer_reg[13]); - break; - - case MIXER_PRIVATE3_READ: - spin_lock_irqsave(&waveartist_lock, flags); - - for (i = 0x30; i < 14 << 8; i += 1 << 8) - waveartist_cmd(devc, 1, &i, 1, mixer_reg + (i >> 8)); - - spin_unlock_irqrestore(&waveartist_lock, flags); - - if (copy_to_user((void *)val, mixer_reg, sizeof(mixer_reg))) - return -EFAULT; - break; - - default: - return -EINVAL; - } - return 0; - } - - /* read back the state from PRIVATE1 */ - case SOUND_MIXER_PRIVATE4: - val = (devc->spkr_mute_state ? VNC_MUTE_INTERNAL_SPKR : 0) | - (devc->line_mute_state ? VNC_MUTE_LINE_OUT : 0) | - (devc->handset_detect ? VNC_HANDSET_DETECT : 0) | - (devc->telephone_detect ? VNC_PHONE_DETECT : 0) | - (devc->no_autoselect ? VNC_DISABLE_AUTOSWITCH : 0); - - return put_user(val, arg) ? -EFAULT : 0; - } - - if (_SIOC_DIR(cmd) & _SIOC_WRITE) { - /* - * special case for master volume: if we - * received this call - switch from hw - * volume control to a software volume - * control, till the hw volume is modified - * to signal that user wants to be back in - * hardware... - */ - if ((cmd & 0xff) == SOUND_MIXER_VOLUME) - devc->use_slider = 0; - - /* speaker output */ - if ((cmd & 0xff) == SOUND_MIXER_SPEAKER) { - unsigned int val, l, r; - - if (get_user(val, arg)) - return -EFAULT; - - l = val & 0x7f; - r = (val & 0x7f00) >> 8; - val = (l + r) / 2; - devc->levels[SOUND_MIXER_SPEAKER] = val | (val << 8); - devc->spkr_mute_state = (val <= 50); - vnc_mute_spkr(devc); - return 0; - } - } - - return -ENOIOCTLCMD; -} - -#endif - -static struct address_info cfg; - -static int attached; - -static int __initdata io = 0; -static int __initdata irq = 0; -static int __initdata dma = 0; -static int __initdata dma2 = 0; - - -static int __init init_waveartist(void) -{ - const struct waveartist_mixer_info *mix; - - if (!io && machine_is_netwinder()) { - /* - * The NetWinder WaveArtist is at a fixed address. - * If the user does not supply an address, use the - * well-known parameters. - */ - io = 0x250; - irq = 12; - dma = 3; - dma2 = 7; - } - - mix = &waveartist_mixer; -#ifdef CONFIG_ARCH_NETWINDER - if (machine_is_netwinder()) - mix = &netwinder_mixer; -#endif - - cfg.io_base = io; - cfg.irq = irq; - cfg.dma = dma; - cfg.dma2 = dma2; - - if (!probe_waveartist(&cfg)) - return -ENODEV; - - attach_waveartist(&cfg, mix); - attached = 1; - - return 0; -} - -static void __exit cleanup_waveartist(void) -{ - if (attached) - unload_waveartist(&cfg); -} - -module_init(init_waveartist); -module_exit(cleanup_waveartist); - -#ifndef MODULE -static int __init setup_waveartist(char *str) -{ - /* io, irq, dma, dma2 */ - int ints[5]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - dma2 = ints[4]; - - return 1; -} -__setup("waveartist=", setup_waveartist); -#endif - -MODULE_DESCRIPTION("Rockwell WaveArtist RWA-010 sound driver"); -module_param_hw(io, int, ioport, 0); /* IO base */ -module_param_hw(irq, int, irq, 0); /* IRQ */ -module_param_hw(dma, int, dma, 0); /* DMA */ -module_param_hw(dma2, int, dma, 0); /* DMA2 */ -MODULE_LICENSE("GPL"); diff --git a/sound/oss/waveartist.h b/sound/oss/waveartist.h deleted file mode 100644 index dac4ca910d95..000000000000 --- a/sound/oss/waveartist.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/sound/oss/waveartist.h - * - * def file for Rockwell RWA010 chip set, as installed in Rebel.com NetWinder - */ - -//registers -#define CMDR 0 -#define DATR 2 -#define CTLR 4 -#define STATR 5 -#define IRQSTAT 12 - -//bit defs -//reg STATR -#define CMD_WE 0x80 -#define CMD_RF 0x40 -#define DAT_WE 0x20 -#define DAT_RF 0x10 - -#define IRQ_REQ 0x08 -#define DMA1 0x04 -#define DMA0 0x02 - -//bit defs -//reg CTLR -#define CMD_WEIE 0x80 -#define CMD_RFIE 0x40 -#define DAT_WEIE 0x20 -#define DAT_RFIE 0x10 - -#define RESET 0x08 -#define DMA1_IE 0x04 -#define DMA0_IE 0x02 -#define IRQ_ACK 0x01 - -//commands - -#define WACMD_SYSTEMID 0x00 -#define WACMD_GETREV 0x00 -#define WACMD_INPUTFORMAT 0x10 //0-8S, 1-16S, 2-8U -#define WACMD_INPUTCHANNELS 0x11 //1-Mono, 2-Stereo -#define WACMD_INPUTSPEED 0x12 //sampling rate -#define WACMD_INPUTDMA 0x13 //0-8bit, 1-16bit, 2-PIO -#define WACMD_INPUTSIZE 0x14 //samples to interrupt -#define WACMD_INPUTSTART 0x15 //start ADC -#define WACMD_INPUTPAUSE 0x16 //pause ADC -#define WACMD_INPUTSTOP 0x17 //stop ADC -#define WACMD_INPUTRESUME 0x18 //resume ADC -#define WACMD_INPUTPIO 0x19 //PIO ADC - -#define WACMD_OUTPUTFORMAT 0x20 //0-8S, 1-16S, 2-8U -#define WACMD_OUTPUTCHANNELS 0x21 //1-Mono, 2-Stereo -#define WACMD_OUTPUTSPEED 0x22 //sampling rate -#define WACMD_OUTPUTDMA 0x23 //0-8bit, 1-16bit, 2-PIO -#define WACMD_OUTPUTSIZE 0x24 //samples to interrupt -#define WACMD_OUTPUTSTART 0x25 //start ADC -#define WACMD_OUTPUTPAUSE 0x26 //pause ADC -#define WACMD_OUTPUTSTOP 0x27 //stop ADC -#define WACMD_OUTPUTRESUME 0x28 //resume ADC -#define WACMD_OUTPUTPIO 0x29 //PIO ADC - -#define WACMD_GET_LEVEL 0x30 -#define WACMD_SET_LEVEL 0x31 -#define WACMD_SET_MIXER 0x32 -#define WACMD_RST_MIXER 0x33 -#define WACMD_SET_MONO 0x34 - -/* - * Definitions for left/right recording input mux - */ -#define ADC_MUX_NONE 0 -#define ADC_MUX_MIXER 1 -#define ADC_MUX_LINE 2 -#define ADC_MUX_AUX2 3 -#define ADC_MUX_AUX1 4 -#define ADC_MUX_MIC 5 - -/* - * Definitions for mixer gain settings - */ -#define MIX_GAIN_LINE 0 /* line in */ -#define MIX_GAIN_AUX1 1 /* aux1 */ -#define MIX_GAIN_AUX2 2 /* aux2 */ -#define MIX_GAIN_XMIC 3 /* crossover mic */ -#define MIX_GAIN_MIC 4 /* normal mic */ -#define MIX_GAIN_PREMIC 5 /* preamp mic */ -#define MIX_GAIN_OUT 6 /* output */ -#define MIX_GAIN_MONO 7 /* mono in */ - -int wa_sendcmd(unsigned int cmd); -int wa_writecmd(unsigned int cmd, unsigned int arg); |