diff options
| author | Jean-Jacques Hiblot <jjhiblot@ti.com> | 2018-04-27 15:55:48 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2018-04-27 19:24:01 +0100 |
| commit | e969a6d222c9da87c6b5978674788faf5c58a07d (patch) | |
| tree | 9b336d0c2a0e447011a4ea1f0cfe114884bc4636 /sound/soc/codecs/tas6424.c | |
| parent | e3976aa6fb409aea3cea812f6a0beebb545e5996 (diff) | |
ASoC: tas6424: Add support for the mute pin
mute can be connected to GPIO. In that case we have to drive it to the
correct value
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'sound/soc/codecs/tas6424.c')
| -rw-r--r-- | sound/soc/codecs/tas6424.c | 37 |
1 files changed, 36 insertions, 1 deletions
diff --git a/sound/soc/codecs/tas6424.c b/sound/soc/codecs/tas6424.c index 5abb17f8d3dd..89fd0c1b3903 100644 --- a/sound/soc/codecs/tas6424.c +++ b/sound/soc/codecs/tas6424.c @@ -45,6 +45,7 @@ struct tas6424_data { unsigned int last_fault2; unsigned int last_warn; struct gpio_desc *standby_gpio; + struct gpio_desc *mute_gpio; }; /* @@ -251,10 +252,16 @@ static int tas6424_set_dai_tdm_slot(struct snd_soc_dai *dai, static int tas6424_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_component *component = dai->component; + struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); unsigned int val; dev_dbg(component->dev, "%s() mute=%d\n", __func__, mute); + if (tas6424->mute_gpio) { + gpiod_set_value_cansleep(tas6424->mute_gpio, mute); + return 0; + } + if (mute) val = TAS6424_ALL_STATE_MUTE; else @@ -289,6 +296,7 @@ static int tas6424_power_on(struct snd_soc_component *component) { struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); int ret; + u8 chan_states; ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), tas6424->supplies); @@ -305,7 +313,18 @@ static int tas6424_power_on(struct snd_soc_component *component) return ret; } - snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, TAS6424_ALL_STATE_MUTE); + if (tas6424->mute_gpio) { + gpiod_set_value_cansleep(tas6424->mute_gpio, 0); + /* + * channels are muted via the mute pin. Don't also mute + * them via the registers so that subsequent register + * access is not necessary to un-mute the channels + */ + chan_states = TAS6424_ALL_STATE_PLAY; + } else { + chan_states = TAS6424_ALL_STATE_MUTE; + } + snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states); /* any time we come out of HIZ, the output channels automatically run DC * load diagnostics, wait here until this completes @@ -645,6 +664,22 @@ static int tas6424_i2c_probe(struct i2c_client *client, tas6424->standby_gpio = NULL; } + /* + * Get control of the mute pin and set it HIGH in order to start with + * all the output muted. + * Note: The actual pin polarity is taken care of in the GPIO lib + * according the polarity specified in the DTS. + */ + tas6424->mute_gpio = devm_gpiod_get_optional(dev, "mute", + GPIOD_OUT_HIGH); + if (IS_ERR(tas6424->mute_gpio)) { + if (PTR_ERR(tas6424->mute_gpio) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "failed to get nmute GPIO: %ld\n", + PTR_ERR(tas6424->mute_gpio)); + tas6424->mute_gpio = NULL; + } + for (i = 0; i < ARRAY_SIZE(tas6424->supplies); i++) tas6424->supplies[i].supply = tas6424_supply_names[i]; ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tas6424->supplies), |