Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues

15 files changed, 67 insertions, 67 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 2017c43dac1b..e9ff4cd5fbe9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -11,7 +11,7 @@ config RAID_ATTRS
 	default n
 	depends on BLOCK
 	depends on SCSI_MOD
-	---help---
+	help
 	  Provides RAID
 
 config SCSI
@@ -20,7 +20,7 @@ config SCSI
 	select SCSI_DMA if HAS_DMA
 	select SG_POOL
 	select BLK_SCSI_REQUEST
-	---help---
+	help
 	  If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
 	  any other SCSI device under Linux, say Y and make sure that you know
 	  the name of your SCSI host adapter (the card inside your computer
@@ -55,7 +55,7 @@ config SCSI_PROC_FS
 	bool "legacy /proc/scsi/ support"
 	depends on SCSI && PROC_FS
 	default y
-	---help---
+	help
 	  This option enables support for the various files in
 	  /proc/scsi.  In Linux 2.6 this has been superseded by
 	  files in sysfs but many legacy applications rely on this.
@@ -69,7 +69,7 @@ config BLK_DEV_SD
 	tristate "SCSI disk support"
 	depends on SCSI
 	select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY
-	---help---
+	help
 	  If you want to use SCSI hard disks, Fibre Channel disks,
 	  Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
 	  USB storage or the SCSI or parallel port version of
@@ -90,7 +90,7 @@ config BLK_DEV_SD
 config CHR_DEV_ST
 	tristate "SCSI tape support"
 	depends on SCSI
-	---help---
+	help
 	  If you want to use a SCSI tape drive under Linux, say Y and read the
 	  SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, and
@@ -104,7 +104,7 @@ config BLK_DEV_SR
 	tristate "SCSI CDROM support"
 	depends on SCSI && BLK_DEV
 	select CDROM
-	---help---
+	help
 	  If you want to use a CD or DVD drive attached to your computer
 	  by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
 	  and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
@@ -118,7 +118,7 @@ config BLK_DEV_SR
 config CHR_DEV_SG
 	tristate "SCSI generic support"
 	depends on SCSI
-	---help---
+	help
 	  If you want to use SCSI scanners, synthesizers or CD-writers or just
 	  about anything having "SCSI" in its name other than hard disks,
 	  CD-ROMs or tapes, say Y here. These won't be supported by the kernel
@@ -143,7 +143,7 @@ config CHR_DEV_SG
 config CHR_DEV_SCH
 	tristate "SCSI media changer support"
 	depends on SCSI
-	---help---
+	help
 	  This is a driver for SCSI media changers.  Most common devices are
 	  tape libraries and MOD/CDROM jukeboxes.  *Real* jukeboxes, you
 	  don't need this for those tiny 6-slot cdrom changers.  Media
@@ -178,7 +178,7 @@ config SCSI_CONSTANTS
 config SCSI_LOGGING
 	bool "SCSI logging facility"
 	depends on SCSI
-	---help---
+	help
 	  This turns on a logging facility that can be used to debug a number
 	  of SCSI related problems.
 
@@ -376,7 +376,7 @@ config SCSI_AHA152X
 	depends on ISA && SCSI
 	select SCSI_SPI_ATTRS
 	select CHECK_SIGNATURE
-	---help---
+	help
 	  This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
 	  SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
 	  must be manually specified in this case.
@@ -391,7 +391,7 @@ config SCSI_AHA152X
 config SCSI_AHA1542
 	tristate "Adaptec AHA1542 support"
 	depends on ISA && SCSI && ISA_DMA_API
-	---help---
+	help
 	  This is support for a SCSI host adapter.  It is explained in section
 	  3.4 of the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.  Note that Trantor was
@@ -405,7 +405,7 @@ config SCSI_AHA1542
 config SCSI_AHA1740
 	tristate "Adaptec AHA1740 support"
 	depends on EISA && SCSI
-	---help---
+	help
 	  This is support for a SCSI host adapter.  It is explained in section
 	  3.5 of the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.  If it doesn't work out
@@ -498,7 +498,7 @@ config SCSI_HPTIOP
 config SCSI_BUSLOGIC
 	tristate "BusLogic SCSI support"
 	depends on (PCI || ISA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
-	---help---
+	help
 	  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
 	  Adapters. Consult the SCSI-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>, and the files
@@ -580,20 +580,20 @@ config LIBFC
 	tristate "LibFC module"
 	depends on SCSI_FC_ATTRS
 	select CRC32
-	---help---
+	help
 	  Fibre Channel library module
 
 config LIBFCOE
 	tristate "LibFCoE module"
 	depends on LIBFC
-	---help---
+	help
 	  Library for Fibre Channel over Ethernet module
 
 config FCOE
 	tristate "FCoE module"
 	depends on PCI
 	depends on LIBFCOE
-	---help---
+	help
 	  Fibre Channel over Ethernet module
 
 config FCOE_FNIC
@@ -672,7 +672,7 @@ config SCSI_FDOMAIN_ISA
 config SCSI_GDTH
 	tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
 	depends on PCI && SCSI
-	---help---
+	help
 	  Formerly called GDT SCSI Disk Array Controller Support.
 
 	  This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) 
@@ -688,7 +688,7 @@ config SCSI_ISCI
 	depends on PCI && SCSI
 	depends on X86
 	select SCSI_SAS_LIBSAS
-	---help---
+	help
 	  This driver supports the 6Gb/s SAS capabilities of the storage
 	  control unit found in the Intel(R) C600 series chipset.
 
@@ -696,7 +696,7 @@ config SCSI_GENERIC_NCR5380
 	tristate "Generic NCR5380/53c400 SCSI ISA card support"
 	depends on ISA && SCSI && HAS_IOPORT_MAP
 	select SCSI_SPI_ATTRS
-	---help---
+	help
 	  This is a driver for old ISA card SCSI controllers based on a
 	  NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
 	  Most boards such as the Trantor T130 fit this category, as do
@@ -708,7 +708,7 @@ config SCSI_GENERIC_NCR5380
 config SCSI_IPS
 	tristate "IBM ServeRAID support"
 	depends on PCI && SCSI
-	---help---
+	help
 	  This is support for the IBM ServeRAID hardware RAID controllers.
 	  See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
 	  and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
@@ -790,7 +790,7 @@ config SCSI_INIA100
 config SCSI_PPA
 	tristate "IOMEGA parallel port (ppa - older drives)"
 	depends on SCSI && PARPORT_PC
-	---help---
+	help
 	  This driver supports older versions of IOMEGA's parallel port ZIP
 	  drive (a 100 MB removable media device).
 
@@ -817,7 +817,7 @@ config SCSI_PPA
 config SCSI_IMM
 	tristate "IOMEGA parallel port (imm - newer drives)"
 	depends on SCSI && PARPORT_PC
-	---help---
+	help
 	  This driver supports newer versions of IOMEGA's parallel port ZIP
 	  drive (a 100 MB removable media device).
 
@@ -844,7 +844,7 @@ config SCSI_IMM
 config SCSI_IZIP_EPP16
 	bool "ppa/imm option - Use slow (but safe) EPP-16"
 	depends on SCSI_PPA || SCSI_IMM
-	---help---
+	help
 	  EPP (Enhanced Parallel Port) is a standard for parallel ports which
 	  allows them to act as expansion buses that can handle up to 64
 	  peripheral devices.
@@ -896,7 +896,7 @@ config 53C700_LE_ON_BE
 config SCSI_STEX
 	tristate "Promise SuperTrak EX Series support"
 	depends on PCI && SCSI
-	---help---
+	help
 	  This driver supports Promise SuperTrak EX series storage controllers.
 
 	  Promise provides Linux RAID configuration utility for these
@@ -914,7 +914,7 @@ config SCSI_SYM53C8XX_2
 	tristate "SYM53C8XX Version 2 SCSI support"
 	depends on PCI && SCSI
 	select SCSI_SPI_ATTRS
-	---help---
+	help
 	  This driver supports the whole NCR53C8XX/SYM53C8XX family of
 	  PCI-SCSI controllers.  It also supports the subset of LSI53C10XX
 	  Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
@@ -928,7 +928,7 @@ config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
 	int "DMA addressing mode"
 	depends on SCSI_SYM53C8XX_2
 	default "1"
-	---help---
+	help
 	  This option only applies to PCI-SCSI chips that are PCI DAC
 	  capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
 
@@ -984,7 +984,7 @@ config SCSI_IPR
 	select FW_LOADER
 	select IRQ_POLL
 	select SGL_ALLOC
-	---help---
+	help
 	  This driver supports the IBM Power Linux family RAID adapters.
 	  This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
 	  as IBM iSeries 5702, 5703, 5709, and 570A.
@@ -1022,7 +1022,7 @@ config SCSI_NCR53C8XX_DEFAULT_TAGS
 	int "default tagged command queue depth"
 	depends on SCSI_ZALON
 	default "8"
-	---help---
+	help
 	  "Tagged command queuing" is a feature of SCSI-2 which improves
 	  performance: the host adapter can send several SCSI commands to a
 	  device's queue even if previous commands haven't finished yet.
@@ -1048,7 +1048,7 @@ config SCSI_NCR53C8XX_MAX_TAGS
 	int "maximum number of queued commands"
 	depends on SCSI_ZALON
 	default "32"
-	---help---
+	help
 	  This option allows you to specify the maximum number of commands
 	  that can be queued to any device, when tagged command queuing is
 	  possible. The default value is 32. Minimum is 2, maximum is 64.
@@ -1065,7 +1065,7 @@ config SCSI_NCR53C8XX_SYNC
 	int "synchronous transfers frequency in MHz"
 	depends on SCSI_ZALON
 	default "20"
-	---help---
+	help
 	  The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
 	  rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80.  The numbers
 	  are respectively the maximum data transfer rates in mega-transfers
@@ -1108,7 +1108,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
 config SCSI_QLOGIC_FAS
 	tristate "Qlogic FAS SCSI support"
 	depends on ISA && SCSI
-	---help---
+	help
 	  This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
 	  FastSCSI! cards as well as any other card based on the FASXX chip
 	  (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
@@ -1158,14 +1158,14 @@ config SCSI_LPFC
 	depends on NVME_TARGET_FC || NVME_TARGET_FC=n
 	depends on NVME_FC || NVME_FC=n
 	select CRC_T10DIF
-	---help---
+	help
           This lpfc driver supports the Emulex LightPulse
           Family of Fibre Channel PCI host adapters.
 
 config SCSI_LPFC_DEBUG_FS
 	bool "Emulex LightPulse Fibre Channel debugfs Support"
 	depends on SCSI_LPFC && DEBUG_FS
-	---help---
+	help
 	  This makes debugging information from the lpfc driver
 	  available via the debugfs filesystem.
 
@@ -1173,7 +1173,7 @@ config SCSI_SIM710
 	tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
 	depends on EISA && SCSI
 	select SCSI_SPI_ATTRS
-	---help---
+	help
 	  This driver is for NCR53c710 based SCSI host adapters.
 
 	  It currently supports Compaq EISA cards.
@@ -1181,7 +1181,7 @@ config SCSI_SIM710
 config SCSI_DC395x
 	tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
 	depends on PCI && SCSI
-	---help---
+	help
 	  This driver supports PCI SCSI host adapters based on the ASIC
 	  TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
 
@@ -1197,7 +1197,7 @@ config SCSI_AM53C974
 	tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
 	depends on PCI && SCSI
 	select SCSI_SPI_ATTRS
-	---help---
+	help
 	  This driver supports PCI SCSI host adapters based on the Am53C974A
 	  chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
 	  PCscsi/PCnet (Am53/79C974) solutions.
@@ -1224,7 +1224,7 @@ config SCSI_WD719X
 	tristate "Western Digital WD7193/7197/7296 support"
 	depends on PCI && SCSI
 	select EEPROM_93CX6
-	---help---
+	help
 	  This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
 	  SCSI controllers (based on WD33C296A chip).
 
@@ -1318,7 +1318,7 @@ config A2091_SCSI
 config GVP11_SCSI
 	tristate "GVP Series II WD33C93A support"
 	depends on ZORRO && SCSI
-	---help---
+	help
 	  If you have a Great Valley Products Series II SCSI controller,
 	  answer Y. Also say Y if you have a later model of GVP SCSI
 	  controller (such as the GVP A4008 or a Combo board). Otherwise,
@@ -1374,7 +1374,7 @@ config ATARI_SCSI
 	tristate "Atari native SCSI support"
 	depends on ATARI && SCSI
 	select SCSI_SPI_ATTRS
-	---help---
+	help
 	  If you have an Atari with built-in NCR5380 SCSI controller (TT,
 	  Falcon, ...) say Y to get it supported. Of course also, if you have
 	  a compatible SCSI controller (e.g. for Medusa).
@@ -1486,7 +1486,7 @@ config SCSI_PMCRAID
 	tristate "PMC SIERRA Linux MaxRAID adapter support"
 	depends on PCI && SCSI && NET
 	select SGL_ALLOC
-	---help---
+	help
 	  This driver supports the PMC SIERRA MaxRAID adapters.
 
 config SCSI_PM8001
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index d4c50b8fce29..a47dbd500e9a 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -15,7 +15,7 @@ config AIC79XX_CMDS_PER_DEVICE
 	int "Maximum number of TCQ commands per device"
 	depends on SCSI_AIC79XX
 	default "32"
-	---help---
+	help
 	Specify the number of commands you would like to allocate per SCSI
 	device when Tagged Command Queueing (TCQ) is enabled on that device.
 
@@ -38,7 +38,7 @@ config AIC79XX_RESET_DELAY_MS
 	int "Initial bus reset delay in milli-seconds"
 	depends on SCSI_AIC79XX
 	default "5000"
-	---help---
+	help
 	The number of milliseconds to delay after an initial bus reset.
 	The bus settle delay following all error recovery actions is
 	dictated by the SCSI layer and is not affected by this value.
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 9d027549d698..0cfd92ce750a 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -7,7 +7,7 @@ config SCSI_AIC7XXX
 	tristate "Adaptec AIC7xxx Fast -> U160 support"
 	depends on (PCI || EISA) && SCSI
 	select SCSI_SPI_ATTRS
-	---help---
+	help
 	This driver supports all of Adaptec's Fast through Ultra 160 PCI
 	based SCSI controllers as well as the aic7770 based EISA and VLB
 	SCSI controllers (the 274x and 284x series).  For AAA and ARO based
@@ -20,7 +20,7 @@ config AIC7XXX_CMDS_PER_DEVICE
 	int "Maximum number of TCQ commands per device"
 	depends on SCSI_AIC7XXX
 	default "32"
-	---help---
+	help
 	Specify the number of commands you would like to allocate per SCSI
 	device when Tagged Command Queueing (TCQ) is enabled on that device.
 
@@ -43,7 +43,7 @@ config AIC7XXX_RESET_DELAY_MS
 	int "Initial bus reset delay in milli-seconds"
 	depends on SCSI_AIC7XXX
 	default "5000"
-	---help---
+	help
 	The number of milliseconds to delay after an initial bus reset.
 	The bus settle delay following all error recovery actions is
 	dictated by the SCSI layer and is not affected by this value.
diff --git a/drivers/scsi/bnx2fc/Kconfig b/drivers/scsi/bnx2fc/Kconfig
index e0ccb48ec961..3cf7e08df809 100644
--- a/drivers/scsi/bnx2fc/Kconfig
+++ b/drivers/scsi/bnx2fc/Kconfig
@@ -9,5 +9,5 @@ config SCSI_BNX2X_FCOE
 	select ETHERNET
 	select NET_VENDOR_BROADCOM
 	select CNIC
-	---help---
+	help
 	This driver supports FCoE offload for the QLogic devices.
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
index 702dc82c9501..75ace2302fed 100644
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -9,6 +9,6 @@ config SCSI_BNX2_ISCSI
 	select ETHERNET
 	select NET_VENDOR_BROADCOM
 	select CNIC
-	---help---
+	help
 	This driver supports iSCSI offload for the QLogic NetXtreme II
 	devices.
diff --git a/drivers/scsi/cxgbi/cxgb3i/Kconfig b/drivers/scsi/cxgbi/cxgb3i/Kconfig
index 3e4b644249cb..e20e6f3bfe64 100644
--- a/drivers/scsi/cxgbi/cxgb3i/Kconfig
+++ b/drivers/scsi/cxgbi/cxgb3i/Kconfig
@@ -8,5 +8,5 @@ config SCSI_CXGB3_ISCSI
 	select CHELSIO_T3
 	select CHELSIO_LIB
 	select SCSI_ISCSI_ATTRS
-	---help---
+	help
 	  This driver supports iSCSI offload for the Chelsio T3 devices.
diff --git a/drivers/scsi/cxgbi/cxgb4i/Kconfig b/drivers/scsi/cxgbi/cxgb4i/Kconfig
index d1f1baba3285..b206e266b4e7 100644
--- a/drivers/scsi/cxgbi/cxgb4i/Kconfig
+++ b/drivers/scsi/cxgbi/cxgb4i/Kconfig
@@ -8,5 +8,5 @@ config SCSI_CXGB4_ISCSI
 	select CHELSIO_T4
 	select CHELSIO_LIB
 	select SCSI_ISCSI_ATTRS
-	---help---
+	help
 	  This driver supports iSCSI offload for the Chelsio T4 devices.
diff --git a/drivers/scsi/esas2r/Kconfig b/drivers/scsi/esas2r/Kconfig
index 19f6d3029658..c9b43f7fce31 100644
--- a/drivers/scsi/esas2r/Kconfig
+++ b/drivers/scsi/esas2r/Kconfig
@@ -2,5 +2,5 @@
 config SCSI_ESAS2R
 	tristate "ATTO Technology's ExpressSAS RAID adapter driver"
 	depends on PCI && SCSI
-	---help---
+	help
 	  This driver supports the ATTO ExpressSAS R6xx SAS/SATA RAID controllers.
diff --git a/drivers/scsi/mpt3sas/Kconfig b/drivers/scsi/mpt3sas/Kconfig
index a072187875df..86209455172d 100644
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
@@ -46,7 +46,7 @@ config SCSI_MPT3SAS
 	select SCSI_SAS_ATTRS
 	select RAID_ATTRS
 	select IRQ_POLL
-	---help---
+	help
 	This driver supports PCI-Express SAS 12Gb/s Host Adapters.
 
 config SCSI_MPT2SAS_MAX_SGE
@@ -54,7 +54,7 @@ config SCSI_MPT2SAS_MAX_SGE
 	depends on PCI && SCSI && SCSI_MPT3SAS
 	default "128"
 	range 16 256
-	---help---
+	help
 	This option allows you to specify the maximum number of scatter-
 	gather entries per I/O. The driver default is 128, which matches
 	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
@@ -66,7 +66,7 @@ config SCSI_MPT3SAS_MAX_SGE
 	depends on PCI && SCSI && SCSI_MPT3SAS
 	default "128"
 	range 16 256
-	---help---
+	help
 	This option allows you to specify the maximum number of scatter-
 	gather entries per I/O. The driver default is 128, which matches
 	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
@@ -78,6 +78,6 @@ config SCSI_MPT2SAS
 	default n
 	select SCSI_MPT3SAS
 	depends on PCI && SCSI
-	---help---
+	help
 	Dummy config option for backwards compatiblity: configure the MPT3SAS
 	driver instead.
diff --git a/drivers/scsi/qedf/Kconfig b/drivers/scsi/qedf/Kconfig
index 7cd993be4e57..eb81a1b0374a 100644
--- a/drivers/scsi/qedf/Kconfig
+++ b/drivers/scsi/qedf/Kconfig
@@ -7,6 +7,6 @@ config QEDF
         depends on LIBFCOE
 	select QED_LL2
 	select QED_FCOE
-	---help---
+	help
 	This driver supports FCoE offload for the QLogic FastLinQ
 	41000 Series Converged Network Adapters.
diff --git a/drivers/scsi/qedi/Kconfig b/drivers/scsi/qedi/Kconfig
index 7ab07f3b453f..2091d883a584 100644
--- a/drivers/scsi/qedi/Kconfig
+++ b/drivers/scsi/qedi/Kconfig
@@ -8,6 +8,6 @@ config QEDI
 	select QED_OOO
 	select QED_ISCSI
 	select ISCSI_BOOT_SYSFS
-	---help---
+	help
 	This driver supports iSCSI offload for the QLogic FastLinQ
 	41000 Series Converged Network Adapters.
diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 764501838e21..802c373fd6d9 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -6,7 +6,7 @@ config SCSI_QLA_FC
 	depends on NVME_FC || !NVME_FC
 	select FW_LOADER
 	select BTREE
-	---help---
+	help
 	This qla2xxx driver supports all QLogic Fibre Channel
 	PCI and PCIe host adapters.
 
@@ -37,14 +37,14 @@ config TCM_QLA2XXX
 	depends on LIBFC
 	select BTREE
 	default n
-	---help---
+	help
 	Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs
 
 if TCM_QLA2XXX
 config TCM_QLA2XXX_DEBUG
 	bool "TCM_QLA2XXX fabric module DEBUG mode for QLogic 24xx+ series target mode HBAs"
 	default n
-	---help---
+	help
 	Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for QLogic 24xx+ series target mode HBAs
 	This will include code to enable the SCSI command jammer
 endif
diff --git a/drivers/scsi/qla4xxx/Kconfig b/drivers/scsi/qla4xxx/Kconfig
index 4bdf31b1407a..2fa249db6656 100644
--- a/drivers/scsi/qla4xxx/Kconfig
+++ b/drivers/scsi/qla4xxx/Kconfig
@@ -4,6 +4,6 @@ config SCSI_QLA_ISCSI
 	depends on PCI && SCSI && NET
 	select SCSI_ISCSI_ATTRS
 	select ISCSI_BOOT_SYSFS
-	---help---
+	help
 	This driver supports the QLogic 40xx (ISP4XXX), 8022 (ISP82XX)
 	and 8032 (ISP83XX) iSCSI host adapter family.
diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig
index d3311c014863..8eec241f074b 100644
--- a/drivers/scsi/smartpqi/Kconfig
+++ b/drivers/scsi/smartpqi/Kconfig
@@ -42,7 +42,7 @@ config SCSI_SMARTPQI
 	depends on PCI && SCSI && !S390
 	select SCSI_SAS_ATTRS
 	select RAID_ATTRS
-	---help---
+	help
 	This driver supports Microsemi PQI controllers.
 
 	<http://www.microsemi.com>
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e2005aeddc2d..d35378be89e8 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -38,7 +38,7 @@ config SCSI_UFSHCD
 	select PM_DEVFREQ
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select NLS
-	---help---
+	help
 	This selects the support for UFS devices in Linux, say Y and make
 	  sure that you know the name of your UFS host adapter (the card
 	  inside your computer that "speaks" the UFS protocol, also
@@ -53,7 +53,7 @@ config SCSI_UFSHCD
 config SCSI_UFSHCD_PCI
 	tristate "PCI bus based UFS Controller support"
 	depends on SCSI_UFSHCD && PCI
-	---help---
+	help
 	This selects the PCI UFS Host Controller Interface. Select this if
 	you have UFS Host Controller with PCI Interface.
 
@@ -64,7 +64,7 @@ config SCSI_UFSHCD_PCI
 config SCSI_UFS_DWC_TC_PCI
 	tristate "DesignWare pci support using a G210 Test Chip"
 	depends on SCSI_UFSHCD_PCI
-	---help---
+	help
 	  Synopsys Test Chip is a PHY for prototyping purposes.
 
 	  If unsure, say N.
@@ -72,7 +72,7 @@ config SCSI_UFS_DWC_TC_PCI
 config SCSI_UFSHCD_PLATFORM
 	tristate "Platform bus based UFS Controller support"
 	depends on SCSI_UFSHCD
-	---help---
+	help
 	This selects the UFS host controller support. Select this if
 	you have an UFS controller on Platform bus.
 
@@ -91,7 +91,7 @@ config SCSI_UFS_CDNS_PLATFORM
 config SCSI_UFS_DWC_TC_PLATFORM
 	tristate "DesignWare platform support using a G210 Test Chip"
 	depends on SCSI_UFSHCD_PLATFORM
-	---help---
+	help
 	  Synopsys Test Chip is a PHY for prototyping purposes.
 
 	  If unsure, say N.
@@ -126,7 +126,7 @@ config SCSI_UFS_MEDIATEK
 config SCSI_UFS_HISI
 	tristate "Hisilicon specific hooks to UFS controller platform driver"
 	depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
-	---help---
+	help
 	  This selects the Hisilicon specific additions to UFSHCD platform driver.
 
 	  Select this if you have UFS controller on Hisilicon chipset.