diff options
| author | Milo Kim <milo.kim@ti.com> | 2017-02-28 15:45:15 +0900 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2017-04-27 09:25:04 +0100 |
| commit | d5aa11bfe9cebb4a3912b11748fd84aa15454229 (patch) | |
| tree | 9c04b03c141f58d595adc923ee3a14fd39517e21 /drivers/mfd/Makefile | |
| parent | 287cce719d85311f61d1b6b7f7b0d93f7907cd46 (diff) | |
mfd: Add TI LMU driver
TI LMU (Lighting Management Unit) driver supports lighting devices below.
LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
LMU devices have common features.
- I2C interface for accessing device registers
- Hardware enable pin control
- Backlight brightness control
- Notifier for hardware fault monitoring
- Regulators for LCD display bias
It contains fault monitor, backlight, LED and regulator driver.
LMU fault monitor
-----------------
LM3633 and LM3697 provide hardware monitoring feature.
It enables open or short circuit detection.
After monitoring is done, each device should be re-initialized.
Notifier is used for this case.
Separate patch for 'ti-lmu-fault-monitor' will be sent later.
Backlight
---------
It's handled by TI LMU backlight consolidated driver and
chip dependent data. Separate patchset will be sent later.
LED indicator
-------------
LM3633 has 6 indicator LEDs. Programmable dimming pattern is also
supported. Separate patch for 'leds-lm3633' will be sent later.
Regulator
---------
LM3631 has 5 regulators for the display bias.
LM3632 supports 3 regulators. One consolidated driver enables it.
The lm363x regulator driver is already upstreamed.
Signed-off-by: Milo Kim <milo.kim@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/mfd/Makefile')
| -rw-r--r-- | drivers/mfd/Makefile | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index e314ba1058dc..294a0525aeb1 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -127,6 +127,8 @@ obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o obj-$(CONFIG_MFD_LP3943) += lp3943.o obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o +obj-$(CONFIG_MFD_TI_LMU) += ti-lmu.o + da9055-objs := da9055-core.o da9055-i2c.o obj-$(CONFIG_MFD_DA9055) += da9055.o obj-$(CONFIG_MFD_DA9062) += da9062-core.o |