Merge tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:
 "A few MIPS fixes:

   - DT fixes for CI20

   - Fix command line handling

   - Correct patchwork URL"

* tag 'mips_fixes_5.6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MAINTAINERS: Correct MIPS patchwork URL
  MIPS: DTS: CI20: fix interrupt for pcf8563 RTC
  MIPS: DTS: CI20: fix PMU definitions for ACT8600
  MIPS: Fix CONFIG_MIPS_CMDLINE_DTB_EXTEND handling

2 files changed, 30 insertions, 17 deletions

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 37b93166bf22..c340f947baa0 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -4,6 +4,8 @@
 #include "jz4780.dtsi"
 #include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
 
 / {
 	compatible = "img,ci20", "ingenic,jz4780";
@@ -163,63 +165,71 @@
 
 		regulators {
 			vddcore: SUDCDC1 {
-				regulator-name = "VDDCORE";
+				regulator-name = "DCDC_REG1";
 				regulator-min-microvolt = <1100000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 			vddmem: SUDCDC2 {
-				regulator-name = "VDDMEM";
+				regulator-name = "DCDC_REG2";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
 			vcc_33: SUDCDC3 {
-				regulator-name = "VCC33";
+				regulator-name = "DCDC_REG3";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 			vcc_50: SUDCDC4 {
-				regulator-name = "VCC50";
+				regulator-name = "SUDCDC_REG4";
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5000000>;
 				regulator-always-on;
 			};
 			vcc_25: LDO_REG5 {
-				regulator-name = "VCC25";
+				regulator-name = "LDO_REG5";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 			wifi_io: LDO_REG6 {
-				regulator-name = "WIFIIO";
+				regulator-name = "LDO_REG6";
 				regulator-min-microvolt = <2500000>;
 				regulator-max-microvolt = <2500000>;
 				regulator-always-on;
 			};
 			vcc_28: LDO_REG7 {
-				regulator-name = "VCC28";
+				regulator-name = "LDO_REG7";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 			vcc_15: LDO_REG8 {
-				regulator-name = "VCC15";
+				regulator-name = "LDO_REG8";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
-			vcc_18: LDO_REG9 {
-				regulator-name = "VCC18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
+			vrtc_18: LDO_REG9 {
+				regulator-name = "LDO_REG9";
+				/* Despite the datasheet stating 3.3V
+				 * for REG9 and the driver expecting that,
+				 * REG9 outputs 1.8V.
+				 * Likely the CI20 uses a proprietary
+				 * factory programmed chip variant.
+				 * Since this is a simple on/off LDO the
+				 * exact values do not matter.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 			vcc_11: LDO_REG10 {
-				regulator-name = "VCC11";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-name = "LDO_REG10";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 		};
@@ -261,7 +271,9 @@
 		rtc@51 {
 			compatible = "nxp,pcf8563";
 			reg = <0x51>;
-			interrupts = <110>;
+
+			interrupt-parent = <&gpf>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 		};
 };
 
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 1ac2752fb791..a7b469d89e2c 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -605,7 +605,8 @@ static void __init bootcmdline_init(char **cmdline_p)
 	 * If we're configured to take boot arguments from DT, look for those
 	 * now.
 	 */
-	if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB))
+	if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) ||
+	    IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND))
 		of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs);
 #endif