diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-11 10:54:43 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-05-11 10:54:43 -0400 |
commit | 8148c17b179d8acad190551fe0fb90d8f5193990 (patch) | |
tree | e3f64bc75a87056b219243e10d52eac7fa1fff8b /arch | |
parent | 6fe567df04a27468b306ae5c53fa7a1cd3acc5e1 (diff) | |
parent | 0fbee1df2078fa1f61e2da14f51ceb357c79ae69 (diff) |
Merge tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the bulk of the GPIO changes for the v5.2 kernel cycle. A bit
later than usual because I was ironing out my own mistakes. I'm
holding some stuff back for the next kernel as a result, and this
should be a healthy and well tested batch.
Core changes:
- The gpiolib MMIO driver has been enhanced to handle two direction
registers, i.e. one register to set lines as input and one register
to set lines as output. It turns out some silicon engineer thinks
the ability to configure a line as input and output at the same
time makes sense, this can be debated but includes a lot of analog
electronics reasoning, and the registers are there and need to be
handled consistently. Unsurprisingly, we enforce the lines to be
either inputs or outputs in such schemes.
- Send in the proper argument value to .set_config() dispatched to
the pin control subsystem. Nobody used it before, now someone does,
so fix it to work as expected.
- The ACPI gpiolib portions can now handle pin bias setting (pull up
or pull down). This has been in the ACPI spec for years and we
finally have it properly integrated with Linux GPIOs. It was based
on an observation from Andy Schevchenko that Thomas Petazzoni's
changes to the core for biasing the PCA950x GPIO expander actually
happen to fit hand-in-glove with what the ACPI core needed. Such
nice synergies happen sometimes.
New drivers:
- A new driver for the Mellanox BlueField GPIO controller. This is
using 64bit MMIO registers and can configure lines as inputs and
outputs at the same time and after improving the MMIO library we
handle it just fine. Interesting.
- A new IXP4xx proper gpiochip driver with hierarchical interrupts
should be coming in from the ARM SoC tree as well.
Driver enhancements:
- The PCA053x driver handles the CAT9554 GPIO expander.
- The PCA053x driver handles the NXP PCAL6416 GPIO expander.
- Wake-up support on PCA053x GPIO lines.
- OMAP now does a nice asynchronous IRQ handling on wake-ups by
letting everything wake up on edges, and this makes runtime PM work
as expected too.
Misc:
- Several cleanups such as devres fixes.
- Get rid of some languager comstructs that cause problems when
compiling with LLVMs clang.
- Documentation review and update"
* tag 'gpio-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits)
gpio: Update documentation
docs: gpio: convert docs to ReST and rename to *.rst
gpio: sch: Remove write-only core_base
gpio: pxa: Make two symbols static
gpiolib: acpi: Respect pin bias setting
gpiolib: acpi: Add acpi_gpio_update_gpiod_lookup_flags() helper
gpiolib: acpi: Set pin value, based on bias, more accurately
gpiolib: acpi: Change type of dflags
gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULT
gpiolib: Make use of enum gpio_lookup_flags consistent
gpiolib: Indent entry values of enum gpio_lookup_flags
gpio: pca953x: add support for pca6416
dt-bindings: gpio: pca953x: document the nxp,pca6416
gpio: pca953x: add pcal6416 to the of_device_id table
gpio: gpio-omap: Remove conditional pm_runtime handling for GPIO interrupts
gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup
tracing: stop making gpio tracing configurable
gpio: pca953x: Configure wake-up path when wake-up is enabled
gpio: of: Optimize quirk checks
gpio: mmio: Drop bgpio_dir_inverted
...
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/configs/aspeed_g4_defconfig | 1 | ||||
-rw-r--r-- | arch/arm/configs/aspeed_g5_defconfig | 1 |
2 files changed, 0 insertions, 2 deletions
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index bdbade6af9c7..190d6e9d3296 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -247,7 +247,6 @@ CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_STACK_END_CHECK=y CONFIG_FUNCTION_TRACER=y -# CONFIG_TRACING_EVENTS_GPIO is not set # CONFIG_RUNTIME_TESTING_MENU is not set CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 4bde84eae4eb..407ffb7655a8 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -247,7 +247,6 @@ CONFIG_PANIC_TIMEOUT=-1 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHED_STACK_END_CHECK=y CONFIG_FUNCTION_TRACER=y -# CONFIG_TRACING_EVENTS_GPIO is not set # CONFIG_RUNTIME_TESTING_MENU is not set CONFIG_DEBUG_WX=y CONFIG_DEBUG_USER=y |