diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-13 12:27:11 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-13 12:27:11 -0700 |
commit | 1bad9ce155a7c010a9a5f3261ad12a6a8eccfb2c (patch) | |
tree | 68a3c700c16c6fb4fe729f7f5f89b59855a995a8 /arch | |
parent | e4e57f20fa12ce044fa2b9fec204098799485539 (diff) | |
parent | bf9c7e3d7924f72225f8f9c28438b4a711192ad3 (diff) |
Merge tag 'sh-for-4.17' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Fixes for bugs in futex, device tree, and userspace breakpoint traps,
and for PCI issues on SH7786"
* tag 'sh-for-4.17' of git://git.libc.org/linux-sh:
arch/sh: pcie-sh7786: handle non-zero DMA offset
arch/sh: pcie-sh7786: adjust the memory mapping
arch/sh: pcie-sh7786: adjust PCI MEM and IO regions
arch/sh: pcie-sh7786: exclude unusable PCI MEM areas
arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled
arch/sh: pci: don't use disabled resources
arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset
arch/sh: add sh7786_mm_sel() function
sh: fix debug trap failure to process signals before return to user
sh: fix memory corruption of unflattened device tree
sh: fix futex FUTEX_OP_SET op on userspace addresses
Diffstat (limited to 'arch')
-rw-r--r-- | arch/sh/boards/of-generic.c | 6 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pci.c | 5 | ||||
-rw-r--r-- | arch/sh/drivers/pci/pcie-sh7786.c | 78 | ||||
-rw-r--r-- | arch/sh/include/asm/futex.h | 5 | ||||
-rw-r--r-- | arch/sh/include/cpu-sh4/cpu/sh7786.h | 7 | ||||
-rw-r--r-- | arch/sh/kernel/dma-nommu.c | 7 | ||||
-rw-r--r-- | arch/sh/kernel/entry-common.S | 2 | ||||
-rw-r--r-- | arch/sh/kernel/setup.c | 8 | ||||
-rw-r--r-- | arch/sh/mm/consistent.c | 4 |
9 files changed, 84 insertions, 38 deletions
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c index 4feb7c86f4ac..46b2481eec90 100644 --- a/arch/sh/boards/of-generic.c +++ b/arch/sh/boards/of-generic.c @@ -126,12 +126,6 @@ static void __init sh_of_setup(char **cmdline_p) { struct device_node *root; -#ifdef CONFIG_USE_BUILTIN_DTB - unflatten_and_copy_device_tree(); -#else - unflatten_device_tree(); -#endif - board_time_init = sh_of_time_init; sh_mv.mv_name = "Unknown SH model"; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 5976a2c8a3e3..e5b7437ab4af 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -49,6 +49,8 @@ static void pcibios_scanbus(struct pci_channel *hose) for (i = 0; i < hose->nr_resources; i++) { res = hose->resources + i; offset = 0; + if (res->flags & IORESOURCE_DISABLED) + continue; if (res->flags & IORESOURCE_IO) offset = hose->io_offset; else if (res->flags & IORESOURCE_MEM) @@ -102,6 +104,9 @@ int register_pci_controller(struct pci_channel *hose) for (i = 0; i < hose->nr_resources; i++) { struct resource *res = hose->resources + i; + if (res->flags & IORESOURCE_DISABLED) + continue; + if (res->flags & IORESOURCE_IO) { if (request_resource(&ioport_resource, res) < 0) goto out; diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index 0167a7352719..382e7ecf4c82 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/sh_clk.h> #include <linux/sh_intc.h> +#include <cpu/sh7786.h> #include "pcie-sh7786.h" #include <asm/sizes.h> @@ -32,6 +33,7 @@ struct sh7786_pcie_port { static struct sh7786_pcie_port *sh7786_pcie_ports; static unsigned int nr_ports; +static unsigned long dma_pfn_offset; static struct sh7786_pcie_hwops { int (*core_init)(void); @@ -40,73 +42,73 @@ static struct sh7786_pcie_hwops { static struct resource sh7786_pci0_resources[] = { { - .name = "PCIe0 IO", + .name = "PCIe0 MEM 0", .start = 0xfd000000, .end = 0xfd000000 + SZ_8M - 1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }, { - .name = "PCIe0 MEM 0", + .name = "PCIe0 MEM 1", .start = 0xc0000000, .end = 0xc0000000 + SZ_512M - 1, .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "PCIe0 MEM 1", + .name = "PCIe0 MEM 2", .start = 0x10000000, .end = 0x10000000 + SZ_64M - 1, .flags = IORESOURCE_MEM, }, { - .name = "PCIe0 MEM 2", + .name = "PCIe0 IO", .start = 0xfe100000, .end = 0xfe100000 + SZ_1M - 1, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_IO, }, }; static struct resource sh7786_pci1_resources[] = { { - .name = "PCIe1 IO", + .name = "PCIe1 MEM 0", .start = 0xfd800000, .end = 0xfd800000 + SZ_8M - 1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }, { - .name = "PCIe1 MEM 0", + .name = "PCIe1 MEM 1", .start = 0xa0000000, .end = 0xa0000000 + SZ_512M - 1, .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "PCIe1 MEM 1", + .name = "PCIe1 MEM 2", .start = 0x30000000, .end = 0x30000000 + SZ_256M - 1, .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "PCIe1 MEM 2", + .name = "PCIe1 IO", .start = 0xfe300000, .end = 0xfe300000 + SZ_1M - 1, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_IO, }, }; static struct resource sh7786_pci2_resources[] = { { - .name = "PCIe2 IO", + .name = "PCIe2 MEM 0", .start = 0xfc800000, .end = 0xfc800000 + SZ_4M - 1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }, { - .name = "PCIe2 MEM 0", + .name = "PCIe2 MEM 1", .start = 0x80000000, .end = 0x80000000 + SZ_512M - 1, .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "PCIe2 MEM 1", + .name = "PCIe2 MEM 2", .start = 0x20000000, .end = 0x20000000 + SZ_256M - 1, .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "PCIe2 MEM 2", + .name = "PCIe2 IO", .start = 0xfcd00000, .end = 0xfcd00000 + SZ_1M - 1, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_IO, }, }; @@ -301,7 +303,7 @@ static int __init pcie_init(struct sh7786_pcie_port *port) { struct pci_channel *chan = port->hose; unsigned int data; - phys_addr_t memphys; + phys_addr_t memstart, memend; size_t memsize; int ret, i, win; @@ -357,15 +359,26 @@ static int __init pcie_init(struct sh7786_pcie_port *port) data |= (0xff << 16); pci_write_reg(chan, data, SH4A_PCIEMACCTLR); - memphys = __pa(memory_start); - memsize = roundup_pow_of_two(memory_end - memory_start); + memstart = __pa(memory_start); + memend = __pa(memory_end); + memsize = roundup_pow_of_two(memend - memstart); + + /* + * The start address must be aligned on its size. So we round + * it down, and then recalculate the size so that it covers + * the entire memory. + */ + memstart = ALIGN_DOWN(memstart, memsize); + memsize = roundup_pow_of_two(memend - memstart); + + dma_pfn_offset = memstart >> PAGE_SHIFT; /* * If there's more than 512MB of memory, we need to roll over to * LAR1/LAMR1. */ if (memsize > SZ_512M) { - pci_write_reg(chan, memphys + SZ_512M, SH4A_PCIELAR1); + pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1); pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1, SH4A_PCIELAMR1); memsize = SZ_512M; @@ -381,7 +394,7 @@ static int __init pcie_init(struct sh7786_pcie_port *port) * LAR0/LAMR0 covers up to the first 512MB, which is enough to * cover all of lowmem on most platforms. */ - pci_write_reg(chan, memphys, SH4A_PCIELAR0); + pci_write_reg(chan, memstart, SH4A_PCIELAR0); pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0); /* Finish initialization */ @@ -438,6 +451,9 @@ static int __init pcie_init(struct sh7786_pcie_port *port) * mode, so just skip them entirely. */ if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) + res->flags |= IORESOURCE_DISABLED; + + if (res->flags & IORESOURCE_DISABLED) continue; pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win)); @@ -472,6 +488,11 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin) return evt2irq(0xae0); } +void pcibios_bus_add_device(struct pci_dev *pdev) +{ + pdev->dev.dma_pfn_offset = dma_pfn_offset; +} + static int __init sh7786_pcie_core_init(void) { /* Return the number of ports */ @@ -527,6 +548,7 @@ static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { static int __init sh7786_pcie_init(void) { struct clk *platclk; + u32 mm_sel; int i; printk(KERN_NOTICE "PCI: Starting initialization.\n"); @@ -560,6 +582,16 @@ static int __init sh7786_pcie_init(void) clk_enable(platclk); + mm_sel = sh7786_mm_sel(); + + /* + * Depending on the MMSELR register value, the PCIe0 MEM 1 + * area may not be available. See Table 13.11 of the SH7786 + * datasheet. + */ + if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6) + sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED; + printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports); for (i = 0; i < nr_ports; i++) { diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h index 15bf07bfa96b..6d192f4908a7 100644 --- a/arch/sh/include/asm/futex.h +++ b/arch/sh/include/asm/futex.h @@ -37,10 +37,7 @@ static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval, pagefault_disable(); do { - if (op == FUTEX_OP_SET) - ret = oldval = 0; - else - ret = get_user(oldval, uaddr); + ret = get_user(oldval, uaddr); if (ret) break; diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h index 0df09e638f09..96b8cb1f754a 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7786.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7786.h @@ -14,6 +14,8 @@ #ifndef __CPU_SH7786_H__ #define __CPU_SH7786_H__ +#include <linux/io.h> + enum { /* PA */ GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4, @@ -131,4 +133,9 @@ enum { GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4, }; +static inline u32 sh7786_mm_sel(void) +{ + return __raw_readl(0xFC400020) & 0x7; +} + #endif /* __CPU_SH7786_H__ */ diff --git a/arch/sh/kernel/dma-nommu.c b/arch/sh/kernel/dma-nommu.c index 62b485107eae..178457d7620c 100644 --- a/arch/sh/kernel/dma-nommu.c +++ b/arch/sh/kernel/dma-nommu.c @@ -16,7 +16,8 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page, enum dma_data_direction dir, unsigned long attrs) { - dma_addr_t addr = page_to_phys(page) + offset; + dma_addr_t addr = page_to_phys(page) + offset + - PFN_PHYS(dev->dma_pfn_offset); WARN_ON(size == 0); @@ -36,12 +37,14 @@ static int nommu_map_sg(struct device *dev, struct scatterlist *sg, WARN_ON(nents == 0 || sg[0].length == 0); for_each_sg(sg, s, nents, i) { + dma_addr_t offset = PFN_PHYS(dev->dma_pfn_offset); + BUG_ON(!sg_page(s)); if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) sh_sync_dma_for_device(sg_virt(s), s->length, dir); - s->dma_address = sg_phys(s); + s->dma_address = sg_phys(s) - offset; s->dma_length = s->length; } diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index c001f782c5f1..28cc61216b64 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -255,7 +255,7 @@ debug_trap: mov.l @r8, r8 jsr @r8 nop - bra __restore_all + bra ret_from_exception nop CFI_ENDPROC diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index b95c411d0333..d34e998b809f 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -330,6 +330,14 @@ void __init setup_arch(char **cmdline_p) /* Let earlyprintk output early console messages */ early_platform_driver_probe("earlyprintk", 1, 1); +#ifdef CONFIG_OF_FLATTREE +#ifdef CONFIG_USE_BUILTIN_DTB + unflatten_and_copy_device_tree(); +#else + unflatten_device_tree(); +#endif +#endif + paging_init(); #ifdef CONFIG_DUMMY_CONSOLE diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 6ea3aab508f2..8ce98691d822 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -59,7 +59,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order); - *dma_handle = virt_to_phys(ret); + *dma_handle = virt_to_phys(ret) - PFN_PHYS(dev->dma_pfn_offset); return ret_nocache; } @@ -69,7 +69,7 @@ void dma_generic_free_coherent(struct device *dev, size_t size, unsigned long attrs) { int order = get_order(size); - unsigned long pfn = dma_handle >> PAGE_SHIFT; + unsigned long pfn = (dma_handle >> PAGE_SHIFT) + dev->dma_pfn_offset; int k; for (k = 0; k < (1 << order); k++) |