powerpc/mpc85xx: Remove P1023 RDS support

P1023RDS is no longer supported/manufactured by Freescale while P1023RDB is.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 0 insertions, 219 deletions

diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts
deleted file mode 100644
index beb6cb12e59d..000000000000
--- a/arch/powerpc/boot/dts/p1023rds.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * P1023 RDS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
-	model = "fsl,P1023";
-	compatible = "fsl,P1023RDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ff600000 {
-		ranges = <0x0 0x0 0xff600000 0x200000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-			fsl_dataflash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at45db081d";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					/* 512KB for u-boot Bootloader Image */
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00080000>;
-					read-only;
-				};
-				partition@dtb {
-					/* 512KB for DTB Image */
-					label = "dtb-spi";
-					reg = <0x00080000 0x00080000>;
-					read-only;
-				};
-			};
-		};
-
-		usb@22000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	lbc: localbus@ff605000 {
-		reg = <0 0xff605000 0 0x1000>;
-
-		/* NOR Flash, BCSR */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xe0000000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
-			device-width = <1>;
-			partition@0 {
-				label = "ramdisk";
-				reg = <0x00000000 0x01c00000>;
-			};
-			partition@1c00000 {
-				label = "kernel";
-				reg = <0x01c00000 0x002e0000>;
-			};
-			partiton@1ee0000 {
-				label = "dtb";
-				reg = <0x01ee0000 0x00020000>;
-			};
-			partition@1f00000 {
-				label = "firmware";
-				reg = <0x01f00000 0x00080000>;
-				read-only;
-			};
-			partition@1f80000 {
-				label = "u-boot";
-				reg = <0x01f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		fpga@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1023rds-fpga";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr@20 {
-				compatible = "fsl,p1023rds-bcsr";
-				reg = <0x20 0x20>;
-			};
-		};
-	};
-
-	pci0: pcie@ff60a000 {
-		reg = <0 0xff60a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			/* IRQ[0:3] are pulled up on board, set to active-low */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 0 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	board_pci1: pci1: pcie@ff609000 {
-		reg = <0 0xff609000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[4:6] only for PCIe, set to active-high,
-			 * IRQ[7] is pulled up on board, set to active-low
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 2 0 0
-				0000 0 0 2 &mpic 5 2 0 0
-				0000 0 0 3 &mpic 6 2 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ff60b000 {
-		reg = <0 0xff60b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[8:10] are pulled up on board, set to active-low
-			 * IRQ[11] only for PCIe, set to active-high,
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 8 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 2 0 0
-				>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1023si-post.dtsi"