Merge 5.9-rc5 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

31 files changed, 161 insertions, 109 deletions

diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst
index f1fc8ae3846a..cc860a0c296b 100644
--- a/Documentation/RCU/lockdep.rst
+++ b/Documentation/RCU/lockdep.rst
@@ -49,7 +49,7 @@ checking of rcu_dereference() primitives:
 		is invoked by both RCU-sched readers and updaters.
 	srcu_dereference_check(p, c):
 		Use explicit check expression "c" along with
-		srcu_read_lock_held()().  This is useful in code that
+		srcu_read_lock_held().  This is useful in code that
 		is invoked by both SRCU readers and updaters.
 	rcu_dereference_raw(p):
 		Don't check.  (Use sparingly, if at all.)
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index d336f3f73a4c..63fd4e6a014b 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -1662,7 +1662,7 @@
 
   98 block	User-mode virtual block device
 		  0 = /dev/ubda		First user-mode block device
-		 16 = /dev/udbb		Second user-mode block device
+		 16 = /dev/ubdb		Second user-mode block device
 		    ...
 
 		Partitions are handled in the same way as for IDE
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index e5a8def45f3f..6c04aea8f4cd 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -156,7 +156,6 @@ against.  Possible keywords are:::
   ``line-range`` cannot contain space, e.g.
   "1-30" is valid range but "1 - 30" is not.
 
-  ``module=foo`` combined keyword=value form is interchangably accepted
 
 The meanings of each keyword are:
 
diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 5e477869df18..5fe1ade88c17 100644
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles.
 
 
 DYTC Lapmode sensor
-------------------
+-------------------
 
 sysfs: dytc_lapmode
 
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index cdd1a9a7f9a2..5072e7064d13 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
 internal P-state selection logic is expected to focus entirely on performance.
 
 This will override the EPP/EPB setting coming from the ``sysfs`` interface
-(see `Energy vs Performance Hints`_ below).
+(see `Energy vs Performance Hints`_ below).  Moreover, any attempts to change
+the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this
+configuration will be rejected.
 
 Also, in this configuration the range of P-states available to the processor's
 internal P-state selection logic is always restricted to the upper boundary
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 5887c917d480..58fe9d02a781 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -30,9 +30,13 @@ allOf:
     then:
       properties:
         clock-output-names:
-          items:
-            - const: clk_out_sd0
-            - const: clk_in_sd0
+          oneOf:
+            - items:
+              - const: clk_out_sd0
+              - const: clk_in_sd0
+            - items:
+              - const: clk_out_sd1
+              - const: clk_in_sd1
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 0c9cf6a8808c..26a8f320a156 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -50,6 +50,8 @@ Optional properties:
 		     error caused by stop clock(fifo full)
 		     Valid range = [0:0x7]. if not present, default value is 0.
 		     applied to compatible "mediatek,mt2701-mmc".
+- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
+- reset-names: Should be "hrst".
 
 Examples:
 mmc0: mmc@11230000 {
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 2cf3affa1be7..96c0b1440c9c 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -15,8 +15,15 @@ Required properties:
   - "nvidia,tegra210-sdhci": for Tegra210
   - "nvidia,tegra186-sdhci": for Tegra186
   - "nvidia,tegra194-sdhci": for Tegra194
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
+- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
+	  One for the module clock and one for the timeout clock.
+	  For all other Tegra devices, must contain a single entry for
+	  the module clock. See ../clocks/clock-bindings.txt for details.
+- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
+	       strings 'sdhci' and 'tmclk' to represent the module and
+	       the timeout clocks, respectively.
+	       For all other Tegra devices must contain the string 'sdhci'
+	       to represent the module clock.
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
@@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
 
 Example:
 sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	compatible = "nvidia,tegra124-sdhci";
 	reg = <0x0 0x700b0000 0x0 0x200>;
 	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -115,3 +122,22 @@ sdhci@700b0000 {
 	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
 	status = "disabled";
 };
+
+sdhci@700b0000 {
+	compatible = "nvidia,tegra210-sdhci";
+	reg = <0x0 0x700b0000 0x0 0x200>;
+	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+		 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+	clock-names = "sdhci", "tmclk";
+	resets = <&tegra_car 14>;
+	reset-names = "sdhci";
+	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+	pinctrl-0 = <&sdmmc1_3v3>;
+	pinctrl-1 = <&sdmmc1_1v8>;
+	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index bf7328aba330..dab208b5c7c7 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -1,4 +1,4 @@
 Distributed Switch Architecture Device Tree Bindings
 ----------------------------------------------------
 
-See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
+See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.
diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
index f5e518d099f2..62d4ed2d7fd7 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
@@ -23,8 +23,8 @@ Required properties:
 
 - compatible:
     Must be one of :
-    "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
-    "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs
+    "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI
 						   BRCMSTB  SoCs
     "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
     			     			  			    BRCMSTB  SoCs
@@ -36,8 +36,8 @@ Required properties:
     			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
     			     			  			    BRCMSTB  SoCs
-    "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
-    "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
+    "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"     : MSPI+BSPI on Cygnus, NSP
+    "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi"     : NS2 SoCs
 
 - reg:
     Define the bases and ranges of the associated I/O address spaces.
@@ -86,7 +86,7 @@ BRCMSTB SoC Example:
     spi@f03e3400 {
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
-		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
+		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
 		reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
 		reg-names = "cs_reg", "mspi", "bspi";
 		interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
@@ -149,7 +149,7 @@ BRCMSTB SoC Example:
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&upg_fixed>;
-		compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
+		compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
 		reg = <0xf0416000 0x180>;
 		reg-names = "mspi";
 		interrupts = <0x14>;
@@ -160,7 +160,7 @@ BRCMSTB SoC Example:
 iProc SoC Example:
 
     qspi: spi@18027200 {
-	compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+	compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 	reg = <0x18027200 0x184>,
 	      <0x18027000 0x124>,
 	      <0x1811c408 0x004>,
@@ -191,7 +191,7 @@ iProc SoC Example:
  NS2 SoC Example:
 
 	       qspi: spi@66470200 {
-		       compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
+		       compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
 		       reg = <0x66470200 0x184>,
 			     <0x66470000 0x124>,
 			     <0x67017408 0x004>,
diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
index 100bfd227265..13ea0cc0a3fa 100644
--- a/Documentation/driver-api/dma-buf.rst
+++ b/Documentation/driver-api/dma-buf.rst
@@ -179,7 +179,7 @@ DMA Fence uABI/Sync File
    :internal:
 
 Indefinite DMA Fences
-~~~~~~~~~~~~~~~~~~~~
+~~~~~~~~~~~~~~~~~~~~~
 
 At various times &dma_fence with an indefinite time until dma_fence_wait()
 finishes have been proposed. Examples include:
diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst
index 71c5a40da320..ccd677ba7d76 100644
--- a/Documentation/driver-api/fpga/fpga-bridge.rst
+++ b/Documentation/driver-api/fpga/fpga-bridge.rst
@@ -6,9 +6,9 @@ API to implement a new FPGA bridge
 
 * struct :c:type:`fpga_bridge` — The FPGA Bridge structure
 * struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
-* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
-* :c:func:`fpga_bridge_register()` — Register a bridge
-* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
+* devm_fpga_bridge_create() — Allocate and init a bridge struct
+* fpga_bridge_register() — Register a bridge
+* fpga_bridge_unregister() — Unregister a bridge
 
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst
index 576f1945eacd..af5382af1379 100644
--- a/Documentation/driver-api/fpga/fpga-mgr.rst
+++ b/Documentation/driver-api/fpga/fpga-mgr.rst
@@ -104,9 +104,9 @@ API for implementing a new FPGA Manager driver
 * ``fpga_mgr_states`` —  Values for :c:member:`fpga_manager->state`.
 * struct :c:type:`fpga_manager` —  the FPGA manager struct
 * struct :c:type:`fpga_manager_ops` —  Low level FPGA manager driver ops
-* :c:func:`devm_fpga_mgr_create` —  Allocate and init a manager struct
-* :c:func:`fpga_mgr_register` —  Register an FPGA manager
-* :c:func:`fpga_mgr_unregister` —  Unregister an FPGA manager
+* devm_fpga_mgr_create() —  Allocate and init a manager struct
+* fpga_mgr_register() —  Register an FPGA manager
+* fpga_mgr_unregister() —  Unregister an FPGA manager
 
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst
index b5484df6ff0f..f487ad64dfb9 100644
--- a/Documentation/driver-api/fpga/fpga-programming.rst
+++ b/Documentation/driver-api/fpga/fpga-programming.rst
@@ -6,9 +6,9 @@ Overview
 
 The in-kernel API for FPGA programming is a combination of APIs from
 FPGA manager, bridge, and regions.  The actual function used to
-trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
+trigger FPGA programming is fpga_region_program_fpga().
 
-:c:func:`fpga_region_program_fpga()` uses functionality supplied by
+fpga_region_program_fpga() uses functionality supplied by
 the FPGA manager and bridges.  It will:
 
  * lock the region's mutex
@@ -20,8 +20,8 @@ the FPGA manager and bridges.  It will:
  * release the locks
 
 The struct fpga_image_info specifies what FPGA image to program.  It is
-allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with
-:c:func:`fpga_image_info_free()`
+allocated/freed by fpga_image_info_alloc() and freed with
+fpga_image_info_free()
 
 How to program an FPGA using a region
 -------------------------------------
@@ -84,10 +84,10 @@ will generate that list.  Here's some sample code of what to do next::
 API for programming an FPGA
 ---------------------------
 
-* :c:func:`fpga_region_program_fpga` —  Program an FPGA
-* :c:type:`fpga_image_info` —  Specifies what FPGA image to program
-* :c:func:`fpga_image_info_alloc()` —  Allocate an FPGA image info struct
-* :c:func:`fpga_image_info_free()` —  Free an FPGA image info struct
+* fpga_region_program_fpga() —  Program an FPGA
+* fpga_image_info() —  Specifies what FPGA image to program
+* fpga_image_info_alloc() —  Allocate an FPGA image info struct
+* fpga_image_info_free() —  Free an FPGA image info struct
 
 .. kernel-doc:: drivers/fpga/fpga-region.c
    :functions: fpga_region_program_fpga
diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst
index 0529b2d2231a..31118a8ba218 100644
--- a/Documentation/driver-api/fpga/fpga-region.rst
+++ b/Documentation/driver-api/fpga/fpga-region.rst
@@ -46,18 +46,18 @@ API to add a new FPGA region
 ----------------------------
 
 * struct :c:type:`fpga_region` — The FPGA region struct
-* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
-* :c:func:`fpga_region_register` —  Register an FPGA region
-* :c:func:`fpga_region_unregister` —  Unregister an FPGA region
+* devm_fpga_region_create() — Allocate and init a region struct
+* fpga_region_register() —  Register an FPGA region
+* fpga_region_unregister() —  Unregister an FPGA region
 
 The FPGA region's probe function will need to get a reference to the FPGA
 Manager it will be using to do the programming.  This usually would happen
 during the region's probe function.
 
-* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count
-* :c:func:`of_fpga_mgr_get` —  Get a reference to an FPGA manager, raise ref count,
+* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count
+* of_fpga_mgr_get() —  Get a reference to an FPGA manager, raise ref count,
   given a device node.
-* :c:func:`fpga_mgr_put` — Put an FPGA manager
+* fpga_mgr_put() — Put an FPGA manager
 
 The FPGA region will need to specify which bridges to control while programming
 the FPGA.  The region driver can build a list of bridges during probe time
@@ -66,11 +66,11 @@ the list of bridges to program just before programming
 (:c:member:`fpga_region->get_bridges`).  The FPGA bridge framework supplies the
 following APIs to handle building or tearing down that list.
 
-* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
+* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
   list
-* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
+* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
   list, given a device node
-* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
+* fpga_bridges_put() — Given a list of bridges, put them
 
 .. kernel-doc:: include/linux/fpga/fpga-region.h
    :functions: fpga_region
diff --git a/Documentation/driver-api/iio/core.rst b/Documentation/driver-api/iio/core.rst
index b0bc0c028cc5..51b21e002396 100644
--- a/Documentation/driver-api/iio/core.rst
+++ b/Documentation/driver-api/iio/core.rst
@@ -11,10 +11,10 @@ Industrial I/O Devices
 ----------------------
 
 * struct :c:type:`iio_dev` - industrial I/O device
-* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver
-* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver
-* :c:func:`iio_device_register()` - register a device with the IIO subsystem
-* :c:func:`iio_device_unregister()` - unregister a device from the IIO
+* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver
+* iio_device_free() - free an :c:type:`iio_dev` from a driver
+* iio_device_register() - register a device with the IIO subsystem
+* iio_device_unregister() - unregister a device from the IIO
   subsystem
 
 An IIO device usually corresponds to a single hardware sensor and it
@@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or
 
 At probe:
 
-1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device.
+1. Call iio_device_alloc(), which allocates memory for an IIO device.
 2. Initialize IIO device fields with driver specific information (e.g.
    device name, device channels).
-3. Call :c:func:`iio_device_register()`, this registers the device with the
+3. Call iio_device_register(), this registers the device with the
    IIO core. After this call the device is ready to accept requests from user
    space applications.
 
 At remove, we free the resources allocated in probe in reverse order:
 
-1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core.
-2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device.
+1. iio_device_unregister(), unregister the device from the IIO core.
+2. iio_device_free(), free the memory allocated for the IIO device.
 
 IIO device sysfs interface
 ==========================
diff --git a/Documentation/filesystems/affs.rst b/Documentation/filesystems/affs.rst
index 7f1a40dce6d3..5776cbd5fa53 100644
--- a/Documentation/filesystems/affs.rst
+++ b/Documentation/filesystems/affs.rst
@@ -110,13 +110,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:
 
   - R maps to r for user, group and others. On directories, R implies x.
 
-  - If both W and D are allowed, w will be set.
+  - W maps to w.
 
   - E maps to x.
 
-  - H and P are always retained and ignored under Linux.
+  - D is ignored.
 
-  - A is always reset when a file is written to.
+  - H, S and P are always retained and ignored under Linux.
+
+  - A is cleared when a file is written to.
 
 User id and group id will be used unless set[gu]id are given as mount
 options. Since most of the Amiga file systems are single user systems
@@ -128,11 +130,13 @@ Linux -> Amiga:
 
 The Linux rwxrwxrwx file mode is handled as follows:
 
-  - r permission will set R for user, group and others.
+  - r permission will allow R for user, group and others.
+
+  - w permission will allow W for user, group and others.
 
-  - w permission will set W and D for user, group and others.
+  - x permission of the user will allow E for plain files.
 
-  - x permission of the user will set E for plain files.
+  - D will be allowed for user, group and others.
 
   - All other flags (suid, sgid, ...) are ignored and will
     not be retained.
diff --git a/Documentation/hwmon/abituguru-datasheet.rst b/Documentation/hwmon/abituguru-datasheet.rst
index 6d5253e2223b..0cd61471d2a2 100644
--- a/Documentation/hwmon/abituguru-datasheet.rst
+++ b/Documentation/hwmon/abituguru-datasheet.rst
@@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank,
 number of bytes data per sensor and contents/meaning of those bytes.
 
 Although both this document and the kernel driver have kept the sensor
-terminoligy for the addressing within a bank this is not 100% correct, in
+terminology for the addressing within a bank this is not 100% correct, in
 bank 0x24 for example the addressing within the bank selects a PWM output not
 a sensor.
 
@@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have
 turned up which do not hold 0x08 at DATA within 250 reads after writing the
 bank address. With these versions this happens quite frequent, using larger
 timeouts doesn't help, they just go offline for a second or 2, doing some
-internal callibration or whatever. Your code should be prepared to handle
+internal calibration or whatever. Your code should be prepared to handle
 this and in case of no response in this specific case just goto sleep for a
 while and then retry.
 
@@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks
 0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
 resulted in a _permanent_ reprogramming of the voltages, luckily I had the
 sensors part configured so that it would shutdown my system on any out of spec
-voltages which proprably safed my computer (after a reboot I managed to
+voltages which probably safed my computer (after a reboot I managed to
 immediately enter the bios and reload the defaults). This probably means that
 the read/write cycle for the non sensor part is different from the sensor part.
diff --git a/Documentation/hwmon/abituguru.rst b/Documentation/hwmon/abituguru.rst
index d8243c827de9..cfda60b757ce 100644
--- a/Documentation/hwmon/abituguru.rst
+++ b/Documentation/hwmon/abituguru.rst
@@ -17,7 +17,7 @@ Supported chips:
     Note:
 	The uGuru is a microcontroller with onboard firmware which programs
 	it to behave as a hwmon IC. There are many different revisions of the
-	firmware and thus effectivly many different revisions of the uGuru.
+	firmware and thus effectively many different revisions of the uGuru.
 	Below is an incomplete list with which revisions are used for which
 	Motherboards:
 
@@ -33,7 +33,7 @@ Supported chips:
 	sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
 	this does not always work. For these uGuru's the autodetection can
 	be overridden with the bank1_types module param. For all 3 known
-	revison 1 motherboards the correct use of this param is:
+	revision 1 motherboards the correct use of this param is:
 	bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
 	You may also need to specify the fan_sensors option for these boards
 	fan_sensors=5
diff --git a/Documentation/hwmon/abituguru3.rst b/Documentation/hwmon/abituguru3.rst
index 514f11f41e8b..88046d866385 100644
--- a/Documentation/hwmon/abituguru3.rst
+++ b/Documentation/hwmon/abituguru3.rst
@@ -13,7 +13,7 @@ Supported chips:
     Note:
 	The uGuru is a microcontroller with onboard firmware which programs
 	it to behave as a hwmon IC. There are many different revisions of the
-	firmware and thus effectivly many different revisions of the uGuru.
+	firmware and thus effectively many different revisions of the uGuru.
 	Below is an incomplete list with which revisions are used for which
 	Motherboards:
 
@@ -24,7 +24,7 @@ Supported chips:
 	- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
 	  AW9D-MAX)
 
-	The abituguru3 driver is only for revison 3.0.x.x motherboards,
+	The abituguru3 driver is only for revision 3.0.x.x motherboards,
 	this driver will not work on older motherboards. For older
 	motherboards use the abituguru (without the 3 !) driver.
 
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index 2aac50b97921..334df758dce3 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -23,8 +23,8 @@ supports C and the GNU C extensions required by the kernel, and is pronounced
 Clang
 -----
 
-The compiler used can be swapped out via `CC=` command line argument to `make`.
-`CC=` should be set when selecting a config and during a build.
+The compiler used can be swapped out via ``CC=`` command line argument to ``make``.
+``CC=`` should be set when selecting a config and during a build. ::
 
 	make CC=clang defconfig
 
@@ -34,33 +34,33 @@ Cross Compiling
 ---------------
 
 A single Clang compiler binary will typically contain all supported backends,
-which can help simplify cross compiling.
+which can help simplify cross compiling. ::
 
 	ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
 
-`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead
-`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For
-example:
+``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
+``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For
+example: ::
 
 	clang --target aarch64-linux-gnu foo.c
 
 LLVM Utilities
 --------------
 
-LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
-to enable them.
+LLVM has substitutes for GNU binutils utilities. Kbuild supports ``LLVM=1``
+to enable them. ::
 
 	make LLVM=1
 
-They can be enabled individually. The full list of the parameters:
+They can be enabled individually. The full list of the parameters: ::
 
-	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
-	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
-	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
+	make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
+	  OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \
+	  READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \
 	  HOSTLD=ld.lld
 
 Currently, the integrated assembler is disabled by default. You can pass
-`LLVM_IAS=1` to enable it.
+``LLVM_IAS=1`` to enable it.
 
 Getting Help
 ------------
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index b81b8913a5a3..58d513a0fa95 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -16,7 +16,7 @@ This document describes the Linux kernel Makefiles.
 	   --- 3.5 Library file goals - lib-y
 	   --- 3.6 Descending down in directories
 	   --- 3.7 Compilation flags
-	   --- 3.8 Command line dependency
+	   --- 3.8 <deleted>
 	   --- 3.9 Dependency tracking
 	   --- 3.10 Special Rules
 	   --- 3.11 $(CC) support functions
@@ -39,8 +39,8 @@ This document describes the Linux kernel Makefiles.
 
 	=== 7 Architecture Makefiles
 	   --- 7.1 Set variables to tweak the build to the architecture
-	   --- 7.2 Add prerequisites to archheaders:
-	   --- 7.3 Add prerequisites to archprepare:
+	   --- 7.2 Add prerequisites to archheaders
+	   --- 7.3 Add prerequisites to archprepare
 	   --- 7.4 List directories to visit when descending
 	   --- 7.5 Architecture-specific boot images
 	   --- 7.6 Building non-kbuild targets
@@ -129,7 +129,7 @@ The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
 be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild'
 file will be used.
 
-Section 3.1 "Goal definitions" is a quick intro, further chapters provide
+Section 3.1 "Goal definitions" is a quick intro; further chapters provide
 more details, with real examples.
 
 3.1 Goal definitions
@@ -965,7 +965,7 @@ When kbuild executes, the following steps are followed (roughly):
 		KBUILD_LDFLAGS         := -m elf_s390
 
 	Note: ldflags-y can be used to further customise
-	the flags used. See chapter 3.7.
+	the flags used. See section 3.7.
 
     LDFLAGS_vmlinux
 	Options for $(LD) when linking vmlinux
@@ -1121,7 +1121,7 @@ When kbuild executes, the following steps are followed (roughly):
 
 	In this example, the file target maketools will be processed
 	before descending down in the subdirectories.
-	See also chapter XXX-TODO that describe how kbuild supports
+	See also chapter XXX-TODO that describes how kbuild supports
 	generating offset header files.
 
 
@@ -1261,7 +1261,7 @@ When kbuild executes, the following steps are followed (roughly):
 	always be built.
 	Assignments to $(targets) are without $(obj)/ prefix.
 	if_changed may be used in conjunction with custom commands as
-	defined in 6.8 "Custom kbuild commands".
+	defined in 7.8 "Custom kbuild commands".
 
 	Note: It is a typical mistake to forget the FORCE prerequisite.
 	Another common pitfall is that whitespace is sometimes
@@ -1411,7 +1411,7 @@ When kbuild executes, the following steps are followed (roughly):
 	that may be shared between individual architectures.
 	The recommended approach how to use a generic header file is
 	to list the file in the Kbuild file.
-	See "7.2 generic-y" for further info on syntax etc.
+	See "8.2 generic-y" for further info on syntax etc.
 
 7.11 Post-link pass
 -------------------
@@ -1601,4 +1601,4 @@ is the right choice.
 
 - Describe how kbuild supports shipped files with _shipped.
 - Generating offset header files.
-- Add more variables to section 7?
+- Add more variables to chapters 7 or 9?
diff --git a/Documentation/locking/locktypes.rst b/Documentation/locking/locktypes.rst
index 4cefed8048ca..ddada4a53749 100644
--- a/Documentation/locking/locktypes.rst
+++ b/Documentation/locking/locktypes.rst
@@ -164,14 +164,14 @@ by disabling preemption or interrupts.
 On non-PREEMPT_RT kernels local_lock operations map to the preemption and
 interrupt disabling and enabling primitives:
 
- =========================== ======================
- local_lock(&llock)          preempt_disable()
- local_unlock(&llock)        preempt_enable()
- local_lock_irq(&llock)      local_irq_disable()
- local_unlock_irq(&llock)    local_irq_enable()
- local_lock_save(&llock)     local_irq_save()
- local_lock_restore(&llock)  local_irq_save()
- =========================== ======================
+ ===============================  ======================
+ local_lock(&llock)               preempt_disable()
+ local_unlock(&llock)             preempt_enable()
+ local_lock_irq(&llock)           local_irq_disable()
+ local_unlock_irq(&llock)         local_irq_enable()
+ local_lock_irqsave(&llock)       local_irq_save()
+ local_unlock_irqrestore(&llock)  local_irq_restore()
+ ===============================  ======================
 
 The named scope of local_lock has two advantages over the regular
 primitives:
@@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong::
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock_1, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags);
   }
 
   func2()
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock_2, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags);
   }
 
   func3()
@@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is::
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
   }
 
   func2()
   {
     local_irq_save(flags);    -> local_lock_irqsave(&local_lock, flags);
     func3();
-    local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
+    local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
   }
 
   func3()
diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst
index 227f427118e8..b7a627d6c97d 100644
--- a/Documentation/maintainer/maintainer-entry-profile.rst
+++ b/Documentation/maintainer/maintainer-entry-profile.rst
@@ -101,3 +101,4 @@ to do something different in the near future.
 
    ../doc-guide/maintainer-profile
    ../nvdimm/maintainer-entry-profile
+   ../riscv/patch-acceptance
diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst
index af029b3ca2ab..11bd5e6108c0 100644
--- a/Documentation/networking/dsa/configuration.rst
+++ b/Documentation/networking/dsa/configuration.rst
@@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup.
 
   # bring up the slave interfaces
   ip link set lan1 up
-  ip link set lan1 up
+  ip link set lan2 up
   ip link set lan3 up
 
   # create bridge
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
index 4a9aa4f0681e..918e32d76fc4 100644
--- a/Documentation/process/deprecated.rst
+++ b/Documentation/process/deprecated.rst
@@ -142,7 +142,7 @@ only NUL-terminated strings. The safe replacement is strscpy().
 (Users of strscpy() still needing NUL-padding should instead
 use strscpy_pad().)
 
-If a caller is using non-NUL-terminated strings, strncpy()() can
+If a caller is using non-NUL-terminated strings, strncpy() can
 still be used, but destinations should be marked with the `__nonstring
 <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
 attribute to avoid future compiler warnings.
diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst
index 998f76e19cdd..f3f4640ee2af 100644
--- a/Documentation/sound/cards/audigy-mixer.rst
+++ b/Documentation/sound/cards/audigy-mixer.rst
@@ -332,7 +332,7 @@ WO 9901953 (A1)
 
 
 US Patents (https://www.uspto.gov/)
-----------------------------------
+-----------------------------------
 
 US 5925841
 	Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
diff --git a/Documentation/sound/cards/sb-live-mixer.rst b/Documentation/sound/cards/sb-live-mixer.rst
index eccb0f0ffd0f..2ce41d3822d8 100644
--- a/Documentation/sound/cards/sb-live-mixer.rst
+++ b/Documentation/sound/cards/sb-live-mixer.rst
@@ -337,7 +337,7 @@ WO 9901953 (A1)
 
 
 US Patents (https://www.uspto.gov/)
-----------------------------------
+-----------------------------------
 
 US 5925841
 	Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
diff --git a/Documentation/sound/designs/timestamping.rst b/Documentation/sound/designs/timestamping.rst
index 2b0fff503415..7c7ecf5dbc4b 100644
--- a/Documentation/sound/designs/timestamping.rst
+++ b/Documentation/sound/designs/timestamping.rst
@@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver
 before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases
 this driver_timestamp will be identical to the regular system tstamp.
 
-Examples of typestamping with HDaudio:
+Examples of timestamping with HDAudio:
 
 1. DMA timestamp, no compensation for DMA+analog delay
 ::
diff --git a/Documentation/translations/it_IT/process/deprecated.rst b/Documentation/translations/it_IT/process/deprecated.rst
index e108eaf82cf6..a642ff3fdc8b 100644
--- a/Documentation/translations/it_IT/process/deprecated.rst
+++ b/Documentation/translations/it_IT/process/deprecated.rst
@@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è
 strscpy(). (chi usa strscpy() e necessita di estendere la
 terminazione con NUL deve aggiungere una chiamata a memset())
 
-Se il chiamate no usa stringhe terminate con NUL, allore strncpy()()
+Se il chiamate no usa stringhe terminate con NUL, allore strncpy()
 può continuare ad essere usata, ma i buffer di destinazione devono essere
 marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
 per evitare avvisi durante la compilazione.
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index eb3a1316f03e..d2b733dc7892 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -6130,7 +6130,7 @@ HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx.
 8.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH
 -----------------------------------
 
-:Architecture: x86
+:Architectures: x86
 
 This capability indicates that KVM running on top of Hyper-V hypervisor
 enables Direct TLB flush for its guests meaning that TLB flush
@@ -6143,19 +6143,33 @@ in CPUID and only exposes Hyper-V identification. In this case, guest
 thinks it's running on Hyper-V and only use Hyper-V hypercalls.
 
 8.22 KVM_CAP_S390_VCPU_RESETS
+-----------------------------
 
-Architectures: s390
+:Architectures: s390
 
 This capability indicates that the KVM_S390_NORMAL_RESET and
 KVM_S390_CLEAR_RESET ioctls are available.
 
 8.23 KVM_CAP_S390_PROTECTED
+---------------------------
 
-Architecture: s390
-
+:Architectures: s390
 
 This capability indicates that the Ultravisor has been initialized and
 KVM can therefore start protected VMs.
 This capability governs the KVM_S390_PV_COMMAND ioctl and the
 KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected
 guests when the state change is invalid.
+
+8.24 KVM_CAP_STEAL_TIME
+-----------------------
+
+:Architectures: arm64, x86
+
+This capability indicates that KVM supports steal time accounting.
+When steal time accounting is supported it may be enabled with
+architecture-specific interfaces.  This capability and the architecture-
+specific interfaces must be consistent, i.e. if one says the feature
+is supported, than the other should as well and vice versa.  For arm64
+see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL".
+For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME".