| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Special case for the systemd-logind case in xfree86: when we're vt-switched
away and a device is plugged in, we get a paused fd from logind. Since we
can't probe the device or do anything with it, we store that device in the
xfree86 and handle it later when we vt-switch back. The device is not added to
inputInfo.devices until that time.
When the device is removed while still vt-switched away, the the config system
never notifies the DDX. It only runs through inputInfo.devices and our device
was never added to that.
When a device is plugged in, removed, and plugged in again while vt-switched
away, we have two entries in the xfree86-specific list that refer to the same
device node, both pending for addition later. On VT switch back, the first one
(the already removed one) will be added successfully, the second one (the
still plugged-in one) fails. Since the fd is correct, the device works until
it is removed again. The removed devices' config_info (i.e. the syspath)
doesn't match the actual device we addded tough (the input number increases
with each plug), it doesn't get removed, the fd remains open and we lose track
of the fd count. Plugging the device in again leads to a dead device.
Fix this by adding a call to notify the DDX to purge any remainders of devices
with the given config_info, that's the only identifiable bit we have at this
point.
https://bugs.freedesktop.org/show_bug.cgi?id=97928
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
DeleteInputDeviceRequest is called from CloseDownDevices on reset, so
call RemoveDevice to avoid leaking devices in Xvfb/Xnest/Xwin.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This hook wasn't used by any DDX. Device addition and removal is handled by
the config backend, so we don't need to do anything special that during the
ListInputDevices request processing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
In theory, these hooks were to be used for DDX-specific device enablement.
None of the DDXs however did anything here. Now we call DEVICE_INIT on all
devices when they are added, so the xfree86 DDX as the only one with real
code didn't do anything here.
kdrive checked for device validity but that's already handled in
ProcXOpenDevice.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
RegisterPointerDevice() and RegisterKeyboardDevice() were already mapped to
RegisterOtherDevice() and obsolete.
RegisterOtherDevice() was called for all devices and the two assignments can
simply be moved into AddInputDevice(). Purge RegisterOtherDevice() and
pretend it never happened.
*lalalalala*
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301975519af7b20109c17d296312d3f2b.
|
|
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
|
|
New access modes are being passed to the device access hook for XI2:
DixCreateAccess for creating a new master device;
DixAdd/RemoveAccess for attaching/removing slave devices to a master; and
DixListProp/GetProp/SetPropAccess for device properties.
Refer to the XACE-Spec document in xorg-docs, section "Device Access."
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
|
|
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
|
|
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
|
|
Conflicts:
XTrap/xtrapddmi.c
Xext/security.c
Xext/xprint.c
Xext/xtest.c
Xext/xvdisp.c
Xi/exevents.c
Xi/grabdevb.c
Xi/grabdevk.c
Xi/opendev.c
Xi/ungrdev.c
Xi/ungrdevb.c
Xi/ungrdevk.c
dix/cursor.c
dix/devices.c
dix/dixutils.c
dix/events.c
dix/getevents.c
dix/main.c
dix/window.c
hw/xfree86/ramdac/xf86Cursor.c
include/dix.h
include/input.h
include/inputstr.h
mi/midispcur.c
mi/miinitext.c
mi/misprite.c
render/animcur.c
xfixes/cursor.c
xkb/xkbAccessX.c
|
|
|
|
Introduces new dix API to lookup a device, dixLookupDevice(), which
replaces LookupDeviceIntRec and LookupDevice.
|
|
Allow a pointer to the first device added to be returned, so we know which
device(s) were added by the NIDR call.
|
|
Add DIDR, which asks the DDX to remove a device, analogous to
NewInputDeviceRequest. Only implemented for XFree86 at the moment.
|
|
|
|
Just short-circuit the change core keyboard/pointer requests.
|
|
For a one-line function, it was pretty broken.
|
|
|
|
|
|
|
|
Add DEVICE_TOUCHSCREEN and DEVICE_CORE controls to the Xi code, and the
TouchscreenClassRec and a coreEvents flag, to toggle propagation of core
events.
|
|
|
|
|
|
|
|
Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
source files in the xserver/xorg tree, predicated on defines of
HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
<X11/fonts/foo.h>.
|
|
change "foo.h" to <X11/foo.h> for core headers, e.g. X.h, Xpoll.h;
change "foo.h", "extensions/foo.h" and "X11/foo.h" to
<X11/extensions/foo.h> for extension headers, e.g. Xv.h;
change "foo.[ch]" to <X11/Xtrans/foo.[ch]> for Xtrans files.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
