/* $XFree86$ */ /* * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sub license, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. */ /************************************************************************* * * File: via_regs.c * Content: The defines of Via registers * ************************************************************************/ #ifndef _VIA_REGS_H_ #define _VIA_REGS_H_ 1 #include "via_driver.h" #define VIA_SERIES(chip) (chip == VIA_CLE266) /* Chip tags. These are used to group the adapters into * related families. */ enum VIACHIPTAGS { VIA_UNKNOWN = 0, VIA_CLE266, VIA_KM400, VIA_K8M800, VIA_LAST }; #define PCI_VIA_VENDOR_ID 0x1106 #define PCI_CHIP_CLE3122 0x3122 #define PCI_CHIP_CLE3022 0x3022 #define PCI_CHIP_VT3205 0x3205 #define PCI_CHIP_VT7205 0x7205 #define PCI_CHIP_VT3204 0x3204 #define PCI_CHIP_VT7204 0x7204 #define BIOS_BSIZE 1024 #define BIOS_BASE 0xc0000 #define VIA_MMIO_REGSIZE 0x9000 #define VIA_MMIO_REGBASE 0x0 #define VIA_MMIO_VGABASE 0x8000 #define VIA_MMIO_BLTBASE 0x200000 #define VIA_MMIO_BLTSIZE 0x10000 /* defines for VIA 2D registers */ #define VIA_REG_GECMD 0x000 #define VIA_REG_GEMODE 0x004 #define VIA_REG_GESTATUS 0x004 /* as same as VIA_REG_GEMODE */ #define VIA_REG_SRCPOS 0x008 #define VIA_REG_DSTPOS 0x00C #define VIA_REG_LINE_K1K2 0x008 #define VIA_REG_LINE_XY 0x00C #define VIA_REG_DIMENSION 0x010 /* width and height */ #define VIA_REG_PATADDR 0x014 #define VIA_REG_FGCOLOR 0x018 #define VIA_REG_DSTCOLORKEY 0x018 /* as same as VIA_REG_FG */ #define VIA_REG_BGCOLOR 0x01C #define VIA_REG_SRCCOLORKEY 0x01C /* as same as VIA_REG_BG */ #define VIA_REG_CLIPTL 0x020 /* top and left of clipping */ #define VIA_REG_CLIPBR 0x024 /* bottom and right of clipping */ #define VIA_REG_OFFSET 0x028 #define VIA_REG_LINE_ERROR 0x028 #define VIA_REG_KEYCONTROL 0x02C /* color key control */ #define VIA_REG_SRCBASE 0x030 #define VIA_REG_DSTBASE 0x034 #define VIA_REG_PITCH 0x038 /* pitch of src and dst */ #define VIA_REG_MONOPAT0 0x03C #define VIA_REG_MONOPAT1 0x040 #define VIA_REG_COLORPAT 0x100 /* from 0x100 to 0x1ff */ /* defines for VIA video registers */ #define VIA_REG_INTERRUPT 0x200 #define VIA_REG_CRTCSTART 0x214 /* defines for VIA HW cursor registers */ #define VIA_REG_CURSOR_MODE 0x2D0 #define VIA_REG_CURSOR_POS 0x2D4 #define VIA_REG_CURSOR_ORG 0x2D8 #define VIA_REG_CURSOR_BG 0x2DC #define VIA_REG_CURSOR_FG 0x2E0 /* defines for VIA 3D registers */ #define VIA_REG_STATUS 0x400 #define VIA_REG_TRANSET 0x43C #define VIA_REG_TRANSPACE 0x440 /* VIA_REG_STATUS(0x400): Engine Status */ #define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */ #define VIA_2D_ENG_BUSY 0x00000001 /* 2D Engine is busy */ #define VIA_3D_ENG_BUSY 0x00000002 /* 3D Engine is busy */ #define VIA_VR_QUEUE_BUSY 0x00020000 /* Virtual Queue is busy */ /* VIA_REG_GECMD(0x00): 2D Engine Command */ #define VIA_GEC_NOOP 0x00000000 #define VIA_GEC_BLT 0x00000001 #define VIA_GEC_LINE 0x00000005 #define VIA_GEC_SRC_XY 0x00000000 #define VIA_GEC_SRC_LINEAR 0x00000010 #define VIA_GEC_DST_XY 0x00000000 #define VIA_GEC_DST_LINRAT 0x00000020 #define VIA_GEC_SRC_FB 0x00000000 #define VIA_GEC_SRC_SYS 0x00000040 #define VIA_GEC_DST_FB 0x00000000 #define VIA_GEC_DST_SYS 0x00000080 #define VIA_GEC_SRC_MONO 0x00000100 /* source is mono */ #define VIA_GEC_PAT_MONO 0x00000200 /* pattern is mono */ #define VIA_GEC_MSRC_OPAQUE 0x00000000 /* mono src is opaque */ #define VIA_GEC_MSRC_TRANS 0x00000400 /* mono src is transparent */ #define VIA_GEC_PAT_FB 0x00000000 /* pattern is in frame buffer */ #define VIA_GEC_PAT_REG 0x00000800 /* pattern is from reg setting */ #define VIA_GEC_CLIP_DISABLE 0x00000000 #define VIA_GEC_CLIP_ENABLE 0x00001000 #define VIA_GEC_FIXCOLOR_PAT 0x00002000 #define VIA_GEC_INCX 0x00000000 #define VIA_GEC_DECY 0x00004000 #define VIA_GEC_INCY 0x00000000 #define VIA_GEC_DECX 0x00008000 #define VIA_GEC_MPAT_OPAQUE 0x00000000 /* mono pattern is opaque */ #define VIA_GEC_MPAT_TRANS 0x00010000 /* mono pattern is transparent */ #define VIA_GEC_MONO_UNPACK 0x00000000 #define VIA_GEC_MONO_PACK 0x00020000 #define VIA_GEC_MONO_DWORD 0x00000000 #define VIA_GEC_MONO_WORD 0x00040000 #define VIA_GEC_MONO_BYTE 0x00080000 #define VIA_GEC_LASTPIXEL_ON 0x00000000 #define VIA_GEC_LASTPIXEL_OFF 0x00100000 #define VIA_GEC_X_MAJOR 0x00000000 #define VIA_GEC_Y_MAJOR 0x00200000 #define VIA_GEC_QUICK_START 0x00800000 /* VIA_REG_GEMODE(0x04): GE mode */ #define VIA_GEM_8bpp 0x00000000 #define VIA_GEM_16bpp 0x00000100 #define VIA_GEM_32bpp 0x00000300 #define VIA_GEM_640 0x00000000 /* 640*480 */ #define VIA_GEM_800 0x00000400 /* 800*600 */ #define VIA_GEM_1024 0x00000800 /* 1024*768 */ #define VIA_GEM_1280 0x00000C00 /* 1280*1024 */ #define VIA_GEM_1600 0x00001000 /* 1600*1200 */ #define VIA_GEM_2048 0x00001400 /* 2048*1536 */ /* VIA_REG_PITCH(0x38): Pitch Setting */ #define VIA_PITCH_ENABLE 0x80000000 #define MAXLOOP 0xffffff #define VerticalRetraceWait() \ { \ VGAOUT8(vgaCRIndex, 0x17); \ if (VGAIN8(vgaCRReg) & 0x80) { \ while ((VGAIN8(vgaIOBase + 0x0a) & 0x08) == 0x00) ; \ while ((VGAIN8(vgaIOBase + 0x0a) & 0x08) == 0x08) ; \ while ((VGAIN8(vgaIOBase + 0x0a) & 0x08) == 0x00) ; \ } \ } #define VIASETREG(addr, data) *(volatile unsigned int *)(pVia->MapBase + (addr)) = (data) #define VIAGETREG(addr) *(volatile unsigned int *)(pVia->MapBase + (addr)) #endif /* _VIA_REGS_H_ */