DRI XFree86-4_3_99_12-merge importDRI-XFree86-4_3_99_12-merge

1 files changed, 62 insertions, 124 deletions

diff --git a/man/radeon.man b/man/radeon.man
index c09ac46..6eeec44 100644
--- a/man/radeon.man
+++ b/man/radeon.man
@@ -1,21 +1,21 @@
-.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.man,v 1.0 2003/01/31 23:04:50 $
+.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.man,v 1.0 2003/01/31 23:04:50
 .ds q \N'34'
 .TH RADEON __drivermansuffix__ __vendorversion__
 .SH NAME
 radeon \- ATI RADEON video driver
 .SH SYNOPSIS
-.nf
+.nf 
 .B "Section \*qDevice\*q"
 .BI "  Identifier \*q"  devname \*q
 .B  "  Driver \*qradeon\*q"
 \ \ ...
 .B EndSection
-.fi
+.fi 
 .SH DESCRIPTION
 .B radeon
-is a __xservername__ driver for ATI RADEON based video cards.  It contains
-full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup,
-flat panel, hardware 2D acceleration, hardware 3D acceleration
+is a XFree86 driver for ATI RADEON based video cards.  It contains
+full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup, 
+flat panel, hardware 2D acceleration, hardware 3D acceleration 
 (except R300 and IGP series cards), hardware cursor, XV extension, Xinerama extension.
 .SH SUPPORTED HARDWARE
 The
@@ -32,7 +32,7 @@ Radeon 7000(VE), M6
 Radeon IGP320(M) (2D only)
 .TP 12
 .B RV200
-Radeon 7500, M7, FireGL 7800
+Radeon 7500, M7
 .TP 12
 .B RS200
 Radeon IGP330(M)/IGP340(M) (2D only)
@@ -44,85 +44,79 @@ Radeon Mobility 7000 IGP (2D only)
 Radeon 8500, 9100, FireGL 8800/8700
 .TP 12
 .B RV250
-Radeon 9000PRO/9000, M9
+Radeon 9000, M9
 .TP 12
 .B RS300
-Radeon 9100 IGP (2D only)
+Radeon 9000 IGP (2D only)
 .TP 12
 .B RV280
-Radeon 9200PRO/9200/9200SE, M9+
+Radeon 9200, M9+
 .TP 12
 .B R300
-Radeon 9700PRO/9700/9500PRO/9500/9600TX, FireGL X1/Z1 (2D only)
+Radeon 9700PRO/9700/9500PRO/9500, FireGL X1/Z1 (2D only)
 .TP 12
 .B R350
-Radeon 9800PRO/9800SE/9800, FireGL X2 (2D only)
-.TP 12
-.B R360
-Radeon 9800XT (2d only)
+Radeon 9800PRO (2D only)
 .TP 12
 .B RV350
-Radeon 9600PRO/9600SE/9600, M10/M11, FireGL T2 (2D only)
-.TP 12
-.B RV360
-Radeon 9600XT (2d only)
+Radeon 9600PRO/9600, M10 (2D only)
 
 .SH CONFIGURATION DETAILS
-Please refer to __xconfigfile__(__filemansuffix__) for general configuration
+Please refer to XF86Config(__filemansuffix__) for general configuration
 details.  This section only covers configuration details specific to this
 driver.
-.PP
+.PP 
 The driver auto\-detects all device information necessary to initialize
 the card.  However, if you have problems with auto\-detection, you can
 specify:
-.PP
+.PP 
 .RS 4
 VideoRam \- in kilobytes
-.br
+.br 
 MemBase  \- physical address of the linear framebuffer
-.br
+.br 
 IOBase   \- physical address of the MMIO registers
-.br
+.br 
 ChipID   \- PCI DEVICE ID
 .RE
-.PP
+.PP 
 In addition, the following driver
 .B Options
 are supported:
-.TP
+.TP 
 .BI "Option \*qSWcursor\*q \*q" boolean \*q
 Selects software cursor.  The default is
 .B off.
-.TP
+.TP 
 .BI "Option \*qNoAccel\*q \*q" boolean \*q
-Enables or disables all hardware acceleration.
+Enables or disables all hardware acceleration.  
 .br
 The default is to
 .B enable
 hardware acceleration.
-.TP
+.TP 
 .BI "Option \*qDac6Bit\*q \*q" boolean \*q
 Enables or disables the use of 6 bits per color component when in 8 bpp
 mode (emulates VGA mode).  By default, all 8 bits per color component
-are used.
+are used.  
 .br
 The default is
 .B off.
-.TP
+.TP 
 .BI "Option \*qVideoKey\*q \*q" integer \*q
 This overrides the default pixel value for the YUV video overlay key.
 .br
 The default value is
 .B 0x1E.
-.TP
+.TP 
 .BI "Option \*qUseFBDev\*q \*q" boolean \*q
 Enable or disable use of an OS\-specific framebuffer device interface
 (which is not supported on all OSs).  See fbdevhw(__drivermansuffix__)
-for further information.
+for further information. 
 .br
 The default is
 .B off.
-.TP
+.TP 
 .BI "Option \*qAGPMode\*q \*q" integer \*q
 Set AGP data transfer rate.
 (used only when DRI is enabled)
@@ -134,7 +128,7 @@ Set AGP data transfer rate.
 4      \-\- x4
 .br
 others \-\- invalid
-.TP
+.TP 
 .BI "Option \*qAGPFastWrite\*q \*q" boolean \*q
 Enable AGP fast write.
 .br
@@ -142,66 +136,34 @@ Enable AGP fast write.
 .br
 The default is
 .B off.
-.TP
-.BI "Option \*qBusType\*q \*q" string \*q
-Used to replace previous ForcePCIMode option.
-Should only be used when driver's bus detection is incorrect
-or you want to force a AGP card to PCI mode. Should NEVER force
-a PCI card to AGP bus.
-.br
-PCI    \-\- PCI bus
-.br
-AGP    \-\- AGP bus
-.br
-PCIE   \-\- PCI Express (falls back to PCI at present)
+.TP 
+.BI "Option \*qForcePCIMode\*q \*q" boolean \*q
+Force to use PCI GART for DRI acceleration.
 .br
 (used only when DRI is enabled)
 .br
 The default is
-.B auto detect.
-.TP
-.BI "Option \*qForcePCIMode\*q \*q" boolean \*q
-Force to use PCI GART for DRI acceleration.
-This option is deprecated in favor of the
-.BI BusType
-option above and will be removed in the next release.
+.B off.
 .TP 
 .BI "Option \*qDDCMode\*q \*q" boolean \*q
 Force to use the modes queried from the connected monitor.
 .br
 The default is
 .B off.
-.TP
-.BI "Option \*qDisplayPriority\*q \*q" string \*q
-.br
-Used to prevent flickering or tearing problem caused by display buffer underflow.
-.br
-AUTO   \-\- Driver calculated (default).
-.br
-BIOS   \-\- Remain unchanged from BIOS setting.
-          Use this if the calculation is not correct
-          for your card.
-.br
-HIGH   \-\- Force to the highest priority.
-          Use this if you have problem with above options.
-          This may affect performence slightly.
-.br
-The default value is
-.B AUTO.
-.TP
+.TP 
 .BI "Option \*qMonitorLayout\*q \*q" string \*q
-.br
+.br 
 This option is used to overwrite the detected monitor types.
 This is only required when driver makes a false detection.
 The possible monitor types are:
-.br
+.br 
 NONE   \-\- Not connected
-.br
+.br 
 CRT    \-\- Analog CRT monitor
-.br
+.br 
 TMDS   \-\- Desktop flat panel
-.br
-LVDS   \-\- Laptop flat panel
+.br 
+LVDS   \-\- Lapto flat panel
 .br
 This option can be used in following format:
 .br
@@ -210,28 +172,28 @@ Option "MonitorLayout" "[type on primary], [type on secondary]"
 For example, Option "MonitorLayout" "CRT, TMDS"
 
 Primary/Secondary head for dual\-head cards:
-.br
+.br 
 (when only one port is used, it will be treated as the primary regardless)
-.br
+.br 
 .B Primary head:
-.br
+.br 
 DVI port on DVI+VGA cards
-.br
+.br 
 LCD output on laptops
-.br
+.br 
 Internal TMDS prot on DVI+DVI cards
-.br
+.br 
 .B Secondary head:
-.br
+.br 
 VGA port on DVI+VGA cards
-.br
+.br 
 VGA port on laptops
-.br
+.br 
 External TMDS port on DVI+DVI cards
 
 The default value is
 .B undefined.
-.TP
+.TP 
 .BI "Option \*qCloneMode\*q \*q" "string" \*q
 Set the first mode for the secondary head.
 It can be different from the modes used for the primary head. If you don't
@@ -242,76 +204,52 @@ For example, Option "CloneMode" "1024x768"
 .br
 The default value is
 .B undefined.
-.TP
+.TP 
 .BI "Option \*qCloneHSync\*q \*q" "string" \*q
-Set the horizontal sync range for the secondary  monitor.
+Set the horizontal sync range for the secondary  monitor. 
 It is not required if a DDC\-capable monitor is connected.
 .br
 For example, Option "CloneHSync" "30.0-86.0"
 .br
 The default value is
 .B undefined.
-.TP
+.TP 
 .BI "Option \*qCloneVRefresh\*q \*q" "string" \*q
-Set the vertical refresh range for the secondary monitor.
+Set the vertical refresh range for the secondary monitor. 
 It is not required if a DDC\-capable monitor is connected.
 .br
 For example, Option "CloneVRefresh" "50.0-120.0"
 .br
 The default value is
 .B undefined.
-.TP
+.TP 
 .BI "Option \*qOverlayOnCRTC2\*q \*q" boolean \*q
 Force hardware overlay to clone head.
 .br
 The default value is
 .B off.
-.TP
+.TP 
 .BI "Option \*qIgnoreEDID\*q \*q" boolean \*q
 Do not use EDID data for mode validation, but DDC is still used
-for monitor detection. This is different from NoDDC option.
+for monitor detection. This is different from NoDDC option.  
 .br
 The default value is
 .B off.
-.TP
-.BI "Option \*qPanelSize\*q \*q" "string" \*q
-Should only be used when driver cannot detect the correct panel size.
-Apply to both desktop (TMDS) and laptop (LVDS) digital panels.
-When a valid panel size is specified, the timings collected from
-DDC and BIOS will not be used. If you have a panel with timings
-different from that of a standard VESA mode, you have to provide
-this information through the Modeline.
-.br
-For example, Option "PanelSize" "1400x1050"
-.br
-The default value is
-.B none.
-.TP
+.TP 
 .BI "Option \*qPanelOff\*q \*q" boolean \*q
 Disable panel output. Only used when clone is enabled.
 .br
 The default value is
 .B off.
-.TP
+.TP 
 .BI "Option \*qEnablePageFlip\*q \*q" boolean \*q
 Enable page flipping for 3D acceleration. This will increase performance
 but not work correctly in some rare cases, hence the default is
 .B off.
 
-.TP
-.BI "Option \*qForceMinDotClock\*q \*q" frequency \*q
-Override minimum dot clock. Some Radeon BIOSes report a minimum dot
-clock unsuitable (too high) for use with television sets even when they
-actually can produce lower dot clocks. If this is the case you can
-override the value here.
-.B Note that using this option may damage your hardware.
-You have been warned. The
-.B frequency
-parameter may be specified as a float value with standard suffixes like
-"k", "kHz", "M", "MHz".
 
 .SH SEE ALSO
-__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)
+XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__)
 .SH AUTHORS
-.nf
+.nf 
 Authors include: ...