DRI trunk-20040721 importDRI-trunk-20040721import-1.1.3

1 files changed, 0 insertions, 138 deletions

diff --git a/README.r128.sgml b/README.r128.sgml
deleted file mode 100644
index 8d7f448..0000000
--- a/README.r128.sgml
+++ /dev/null
@@ -1,138 +0,0 @@
-<!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN"[
-<!ENTITY % defs SYSTEM "defs.ent"> %defs;
-]>
-
-<article>
-<title>Information for ATI Rage 128 Users
-<author>Precision Insight, Inc., SuSE GmbH
-<date>13 June 2000
-
-<ident>
-</ident>
-
-<toc>
-
-<sect>Supported Hardware
-<p>
-<itemize>
-  <item>ATI Rage 128 based cards
-</itemize>
-
-
-<sect>Features
-<p>
-<itemize>
-  <item>Full support (including hardware accelerated 2D drawing) for 8, 15,
-        16, 24 bit pixel depths.
-  <item>Hardware cursor support to reduce sprite flicker.
-  <item>Support for high resolution video modes up to 1800x1440 @ 70Hz.
-  <item>Support for doublescan video modes (e.g., 320x200 and 320x240).
-  <item>Support for gamma correction at all pixel depths.
-  <item>Fully programmable clock supported.
-  <item>Robust text mode restore for VT switching.
-</itemize>
-
-
-<sect>Technical Notes
-<p>
-<itemize>
-  <item>None
-</itemize>
-
-
-<sect>Reported Working Video Cards
-<p>
-<itemize>
-  <item>Rage Fury AGP 32MB
-  <item>XPERT 128 AGP 16MB
-  <item>XPERT 99 AGP 8MB
-</itemize>
-
-
-<sect>Configuration
-<p>
-The driver auto-detects all device information necessary to
-initialize the card.  The only lines you need in the "Device"
-section of your xorg.conf file are:
-<verb>
-       Section "Device"
-           Identifier "Rage 128"
-           Driver     "r128"
-       EndSection
-</verb>
-or let <tt>xorgconfig</tt> do this for you.
-
-However, if you have problems with auto-detection, you can specify:
-<itemize>
-  <item>VideoRam - in kilobytes
-  <item>MemBase  - physical address of the linear framebuffer
-  <item>IOBase   - physical address of the memory mapped IO registers
-  <item>ChipID   - PCI DEVICE ID
-</itemize>
-
-
-<sect>Driver Options
-<p>
-<itemize>
-  <item>"hw_cursor" - request hardware cursor (default)
-  <item>"sw_cursor" - software cursor only
-  <item>"no_accel"  - software rendering only
-  <item>"dac_8_bit" - use color weight 888 in 8 bpp mode (default)
-  <item>"dac_6_bit" - use color weight 666 in 8 bpp mode (VGA emulation)
-</itemize>
-
-
-<sect>Known Limitations
-<p>
-<itemize>
-  <item>None
-</itemize>
-
-
-<sect>Authors
-<p>
-The X11R&relvers; driver was originally part of XFree86 4.4 rc2.
-
-The XFree86 4 driver was ported from XFree86 3.3.x and enhanced by:
-<itemize>
-   <item>Rickard E. (Rik) Faith <email>faith@precisioninsight.com</email>
-   <item>Kevin E. Martin <email>kevin@precisioninsight.com</email>
-</itemize>
-<p>
-The XFree86 4 driver was funded by ATI and was donated to The XFree86
-Project by:
-<verb>
-    Precision Insight, Inc.
-    Cedar Park, TX
-    USA
-</verb>
-<p>
-The XFree86 3.3.x driver used for the port was written by:
-<itemize>
-   <item>Rickard E. (Rik) Faith <email>faith@precisioninsight.com</email>
-   <item>Kevin E. Martin <email>kevin@precisioninsight.com</email>
-</itemize>
-The XFree86 3.3.x driver was funded by ATI and was donated to The XFree86
-Project by Precision Insight, Inc.  It was based in part on an earlier
-driver that was written by:
-<itemize>
-   <item>Alan Hourihane <email>alanh@fairlite.demon.co.uk</email>
-   <item>Dirk Hohndel <email>hohndel@suse.de</email>
-</itemize>
-<p>This early driver was funded and donated to The XFree86 Project by:
-<verb>
-    SuSE GmbH
-    Schanzaekerstr. 10
-    90443 Nuernberg
-    Germany
-</verb>
-
-<p>
-<htmlurl name="http://www.precisioninsight.com"
-          url="http://www.precisioninsight.com">
-<p>
-<htmlurl name="http://www.suse.com"
-          url="http://www.suse.com">
-
-
-</article>