/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nsc/nsc_gx1_video.c,v 1.7tsi Exp $ */ /* * $Workfile: nsc_gx1_video.c $ * $Revision$ * $Author$ * * File Contents: This file consists of main Xfree video supported routines. * * Project: Geode Xfree Frame buffer device driver. * */ /* * NSC_LIC_ALTERNATIVE_PREAMBLE * * Revision 1.0 * * National Semiconductor Alternative GPL-BSD License * * National Semiconductor Corporation licenses this software * ("Software"): * * National Xfree frame buffer driver * * under one of the two following licenses, depending on how the * Software is received by the Licensee. * * If this Software is received as part of the Linux Framebuffer or * other GPL licensed software, then the GPL license designated * NSC_LIC_GPL applies to this Software; in all other circumstances * then the BSD-style license designated NSC_LIC_BSD shall apply. * * END_NSC_LIC_ALTERNATIVE_PREAMBLE */ /* NSC_LIC_BSD * * National Semiconductor Corporation Open Source License for * * National Xfree frame buffer driver * * (BSD License with Export Notice) * * Copyright (c) 1999-2001 * National Semiconductor Corporation. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * * Neither the name of the National Semiconductor Corporation nor * the names of its contributors may be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * NATIONAL SEMICONDUCTOR CORPORATION OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE, * INTELLECTUAL PROPERTY INFRINGEMENT, OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF * YOUR JURISDICTION. It is licensee's responsibility to comply with * any export regulations applicable in licensee's jurisdiction. Under * CURRENT (2001) U.S. export regulations this software * is eligible for export from the U.S. and can be downloaded by or * otherwise exported or reexported worldwide EXCEPT to U.S. embargoed * destinations which include Cuba, Iraq, Libya, North Korea, Iran, * Syria, Sudan, Afghanistan and any other country to which the U.S. * has embargoed goods and services. * * END_NSC_LIC_BSD */ /* NSC_LIC_GPL * * National Semiconductor Corporation Gnu General Public License for * * National Xfree frame buffer driver * * (GPL License with Export Notice) * * Copyright (c) 1999-2001 * National Semiconductor Corporation. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted under the terms of the GNU General * Public License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version * * In addition to the terms of the GNU General Public License, neither * the name of the National Semiconductor Corporation nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * NATIONAL SEMICONDUCTOR CORPORATION OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE, * INTELLECTUAL PROPERTY INFRINGEMENT, OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. See the GNU General Public License for more details. * * EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF * YOUR JURISDICTION. It is licensee's responsibility to comply with * any export regulations applicable in licensee's jurisdiction. Under * CURRENT (2001) U.S. export regulations this software * is eligible for export from the U.S. and can be downloaded by or * otherwise exported or reexported worldwide EXCEPT to U.S. embargoed * destinations which include Cuba, Iraq, Libya, North Korea, Iran, * Syria, Sudan, Afghanistan and any other country to which the U.S. * has embargoed goods and services. * * You should have received a copy of the GNU General Public License * along with this file; if not, write to the Free Software Foundation, * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * END_NSC_LIC_GPL */ /* * Fixes & Extensions to support Y800 greyscale modes * Alan Hourihane */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Resources.h" #include "xf86_ansic.h" #include "compiler.h" #include "xf86PciInfo.h" #include "xf86Pci.h" #include "xf86fbman.h" #include "regionstr.h" #include "nsc.h" #include #include "xaa.h" #include "xaalocal.h" #include "dixstruct.h" #include "fourcc.h" #include "nsc_fourcc.h" #define OFF_DELAY 200 /* milliseconds */ #define FREE_DELAY 60000 #define OFF_TIMER 0x01 #define FREE_TIMER 0x02 #define CLIENT_VIDEO_ON 0x04 #define TIMER_MASK (OFF_TIMER | FREE_TIMER) #define XV_PROFILE 0 #define REINIT 1 void GX1InitVideo(ScreenPtr pScreen); void GX1ResetVideo(ScrnInfoPtr pScrn); #define DBUF 0 static XF86VideoAdaptorPtr GX1SetupImageVideo(ScreenPtr); static void GX1InitOffscreenImages(ScreenPtr); static void GX1StopVideo(ScrnInfoPtr, pointer, Bool); static int GX1SetPortAttribute(ScrnInfoPtr, Atom, INT32, pointer); static int GX1GetPortAttribute(ScrnInfoPtr, Atom, INT32 *, pointer); static void GX1QueryBestSize(ScrnInfoPtr, Bool, short, short, short, short, unsigned int *, unsigned int *, pointer); static int GX1PutImage(ScrnInfoPtr, short, short, short, short, short, short, short, short, int, unsigned char *, short, short, Bool, RegionPtr, pointer); static int GX1QueryImageAttributes(ScrnInfoPtr, int, unsigned short *, unsigned short *, int *, int *); static void GX1BlockHandler(int, pointer, pointer, pointer); void GX1SetVideoPosition(int, int, int, int, short, short, short, short, int, int, ScrnInfoPtr); extern void GX1AccelSync(ScrnInfoPtr pScreenInfo); #if !defined(STB_X) extern int DeltaX, DeltaY; #else int DeltaX, DeltaY; #endif #define MAKE_ATOM(a) MakeAtom(a, sizeof(a) - 1, TRUE) static Atom xvColorKey, xvColorKeyMode, xvFilter #if DBUF , xvDoubleBuffer #endif ; /*---------------------------------------------------------------------------- * GX1InitVideo * * Description :This is the initialization routine.It creates a new video adapter * and calls GX1SetupImageVideo to initialize the adaptor by filling * XF86VideoAdaptorREc.Then it lists the existing adaptors and adds the * new one to it. Finally the list of XF86VideoAdaptorPtr pointers are * passed to the xf86XVScreenInit(). * * Parameters. * ScreenPtr * pScreen :Screen handler pointer having screen information. * * Returns :none * * Comments :none * *---------------------------------------------------------------------------- */ void GX1InitVideo(ScreenPtr pScreen) { GeodePtr pGeode; ScrnInfoPtr pScreenInfo = xf86Screens[pScreen->myNum]; XF86VideoAdaptorPtr *adaptors, *newAdaptors = NULL; XF86VideoAdaptorPtr newAdaptor = NULL; int num_adaptors; pGeode = GEODEPTR(pScreenInfo); DEBUGMSG(0, (0, X_NONE, "InitVideo\n")); newAdaptor = GX1SetupImageVideo(pScreen); GX1InitOffscreenImages(pScreen); num_adaptors = xf86XVListGenericAdaptors(pScreenInfo, &adaptors); if (newAdaptor) { if (!num_adaptors) { num_adaptors = 1; adaptors = &newAdaptor; } else { newAdaptors = /* need to free this someplace */ xalloc((num_adaptors + 1) * sizeof(XF86VideoAdaptorPtr *)); if (newAdaptors) { memcpy(newAdaptors, adaptors, num_adaptors * sizeof(XF86VideoAdaptorPtr)); newAdaptors[num_adaptors] = newAdaptor; adaptors = newAdaptors; num_adaptors++; } } } if (num_adaptors) xf86XVScreenInit(pScreen, adaptors, num_adaptors); if (newAdaptors) xfree(newAdaptors); } /* client libraries expect an encoding */ static XF86VideoEncodingRec DummyEncoding[1] = { { 0, "XV_IMAGE", 1024, 1024, {1, 1} } }; #define NUM_FORMATS 4 static XF86VideoFormatRec Formats[NUM_FORMATS] = { {8, PseudoColor}, {15, TrueColor}, {16, TrueColor}, {24, TrueColor} }; #if DBUF #define NUM_ATTRIBUTES 4 #else #define NUM_ATTRIBUTES 3 #endif static XF86AttributeRec Attributes[NUM_ATTRIBUTES] = { #if DBUF {XvSettable | XvGettable, 0, 1, "XV_DOUBLE_BUFFER"}, #endif {XvSettable | XvGettable, 0, (1 << 24) - 1, "XV_COLORKEY"}, {XvSettable | XvGettable, 0, 1, "XV_FILTER"}, {XvSettable | XvGettable, 0, 1, "XV_COLORKEYMODE"} }; #define NUM_IMAGES 7 static XF86ImageRec Images[NUM_IMAGES] = { XVIMAGE_UYVY, XVIMAGE_YUY2, XVIMAGE_Y2YU, XVIMAGE_YVYU, XVIMAGE_Y800, XVIMAGE_I420, XVIMAGE_YV12 }; typedef struct { FBAreaPtr area; FBLinearPtr linear; RegionRec clip; CARD32 colorKey; CARD32 colorKeyMode; CARD32 filter; CARD32 videoStatus; Time offTime; Time freeTime; #if DBUF Bool doubleBuffer; int currentBuffer; #endif } GeodePortPrivRec, *GeodePortPrivPtr; #define GET_PORT_PRIVATE(pScrn) \ (GeodePortPrivPtr)((GEODEPTR(pScrn))->adaptor->pPortPrivates[0].ptr) /*---------------------------------------------------------------------------- * GX1SetColorKey * * Description :This function reads the color key for the pallete and * sets the video color key register. * * Parameters. * ScreenInfoPtr * pScrn :Screen pointer having screen information. * pPriv :Video port private data * * Returns :none * * Comments :none * *---------------------------------------------------------------------------- */ static INT32 GX1SetColorkey(ScrnInfoPtr pScrn, GeodePortPrivPtr pPriv) { int red, green, blue; unsigned long key; DEBUGMSG(0, (0, X_NONE, "ColorKey\n")); switch (pScrn->depth) { case 8: GFX(get_display_palette_entry(pPriv->colorKey & 0xFF, &key)); red = ((key >> 16) & 0xFF); green = ((key >> 8) & 0xFF); blue = (key & 0xFF); break; default: red = (pPriv->colorKey & pScrn->mask.red) >> pScrn->offset.red << (8 - pScrn-> weight. red); green = (pPriv->colorKey & pScrn->mask.green) >> pScrn->offset. green << (8 - pScrn->weight.green); blue = (pPriv->colorKey & pScrn->mask.blue) >> pScrn->offset. blue << (8 - pScrn->weight.blue); break; } GFX(set_video_color_key((blue | (green << 8) | (red << 16)), 0xFCFCFC, (pPriv->colorKeyMode == 0))); REGION_EMPTY(pScrn->pScreen, &pPriv->clip); return 0; } /*---------------------------------------------------------------------------- * GX1ResetVideo * * Description : This function resets the video * * Parameters. * ScreenInfoPtr * pScrn :Screen pointer having screen information. * * Returns :None * * Comments :none * *---------------------------------------------------------------------------- */ void GX1ResetVideo(ScrnInfoPtr pScrn) { GeodePtr pGeode = GEODEPTR(pScrn); GeodePortPrivPtr pPriv = pGeode->adaptor->pPortPrivates[0].ptr; DEBUGMSG(0, (0, X_NONE, "ResetVideo\n")); if (!pGeode->NoAccel) GX1AccelSync(pScrn); GFX(set_video_palette(NULL)); GX1SetColorkey(pScrn, pPriv); GFX(set_video_filter(pPriv->filter, pPriv->filter)); } /*---------------------------------------------------------------------------- * GX1SetupImageVideo * * Description : This function allocates space for a Videoadaptor and initializes * the XF86VideoAdaptorPtr record. * * Parameters. * ScreenPtr * pScreen :Screen handler pointer having screen information. * * Returns :XF86VideoAdaptorPtr :- pointer to the initialized video adaptor record. * * Comments :none * *---------------------------------------------------------------------------- */ static XF86VideoAdaptorPtr GX1SetupImageVideo(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; GeodePtr pGeode = GEODEPTR(pScrn); XF86VideoAdaptorPtr adapt; GeodePortPrivPtr pPriv; DEBUGMSG(0, (0, X_NONE, "SetupImageVideo\n")); if (!(adapt = xcalloc(1, sizeof(XF86VideoAdaptorRec) + sizeof(GeodePortPrivRec) + sizeof(DevUnion)))) return NULL; adapt->type = XvWindowMask | XvInputMask | XvImageMask; adapt->flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT; adapt->name = "National Semiconductor Corporation"; adapt->nEncodings = 1; adapt->pEncodings = DummyEncoding; adapt->nFormats = NUM_FORMATS; adapt->pFormats = Formats; adapt->nPorts = 1; adapt->pPortPrivates = (DevUnion *) (&adapt[1]); pPriv = (GeodePortPrivPtr) (&adapt->pPortPrivates[1]); adapt->pPortPrivates[0].ptr = (pointer) (pPriv); adapt->pAttributes = Attributes; adapt->nImages = NUM_IMAGES; adapt->nAttributes = NUM_ATTRIBUTES; adapt->pImages = Images; adapt->PutVideo = NULL; adapt->PutStill = NULL; adapt->GetVideo = NULL; adapt->GetStill = NULL; adapt->StopVideo = GX1StopVideo; adapt->SetPortAttribute = GX1SetPortAttribute; adapt->GetPortAttribute = GX1GetPortAttribute; adapt->QueryBestSize = GX1QueryBestSize; adapt->PutImage = GX1PutImage; adapt->QueryImageAttributes = GX1QueryImageAttributes; pPriv->colorKey = pGeode->videoKey; pPriv->colorKeyMode = 0; pPriv->filter = 0; pPriv->videoStatus = 0; #if DBUF pPriv->doubleBuffer = TRUE; pPriv->currentBuffer = 0; /* init to first buffer */ #endif /* gotta uninit this someplace */ REGION_NULL(pScreen, &pPriv->clip); pGeode->adaptor = adapt; pGeode->BlockHandler = pScreen->BlockHandler; pScreen->BlockHandler = GX1BlockHandler; xvColorKey = MAKE_ATOM("XV_COLORKEY"); xvColorKeyMode = MAKE_ATOM("XV_COLORKEYMODE"); xvFilter = MAKE_ATOM("XV_FILTER"); #if DBUF xvDoubleBuffer = MAKE_ATOM("XV_DOUBLE_BUFFER"); #endif GX1ResetVideo(pScrn); return adapt; } /*---------------------------------------------------------------------------- * GX1StopVideo * * Description :This function is used to stop input and output video * * Parameters. * pScreenInfo * pScrn :Screen handler pointer having screen information. * data :Pointer to the video port's private data * exit :Flag indicating whether the offscreen areas used for video * to be deallocated or not. * Returns :none * * Comments :none * *---------------------------------------------------------------------------- */ static void GX1StopVideo(ScrnInfoPtr pScrn, pointer data, Bool exit) { GeodePortPrivPtr pPriv = (GeodePortPrivPtr) data; GeodePtr pGeode = GEODEPTR(pScrn); DEBUGMSG(0, (0, X_NONE, "StopVideo\n")); REGION_EMPTY(pScrn->pScreen, &pPriv->clip); if (!pGeode->NoAccel) GX1AccelSync(pScrn); if (exit) { if (pPriv->videoStatus & CLIENT_VIDEO_ON) { GFX(set_video_enable(0)); } if (pPriv->area) { xf86FreeOffscreenArea(pPriv->area); pPriv->area = NULL; } pPriv->videoStatus = 0; pGeode->OverlayON = FALSE; } else { if (pPriv->videoStatus & CLIENT_VIDEO_ON) { pPriv->videoStatus |= OFF_TIMER; pPriv->offTime = currentTime.milliseconds + OFF_DELAY; } } } /*---------------------------------------------------------------------------- * GX1SetPortAttribute * * Description :This function is used to set the attributes of a port like colorkeymode, * double buffer support and filter. * * Parameters. * pScreenInfo * Ptr :Screen handler pointer having screen information. * data :Pointer to the video port's private data * attribute :The port attribute to be set * value :Value of the attribute to be set. * * Returns :Sucess if the attribute is supported, else BadMatch * * Comments :none * *---------------------------------------------------------------------------- */ static int GX1SetPortAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 value, pointer data) { GeodePortPrivPtr pPriv = (GeodePortPrivPtr) data; GeodePtr pGeode = GEODEPTR(pScrn); if (!pGeode->NoAccel) GX1AccelSync(pScrn); if (attribute == xvColorKey) { pPriv->colorKey = value; GX1SetColorkey(pScrn, pPriv); } #if DBUF else if (attribute == xvDoubleBuffer) { if ((value < 0) || (value > 1)) return BadValue; pPriv->doubleBuffer = value; } #endif else if (attribute == xvColorKeyMode) { pPriv->colorKeyMode = value; GX1SetColorkey(pScrn, pPriv); } else if (attribute == xvFilter) { pPriv->filter = value; GFX(set_video_filter(pPriv->filter, pPriv->filter)); } else return BadMatch; return Success; } /*---------------------------------------------------------------------------- * GX1GetPortAttribute * * Description :This function is used to get the attributes of a port like hue, * saturation,brightness or contrast. * * Parameters. * pScreenInfo * Ptr :Screen handler pointer having screen information. * data :Pointer to the video port's private data * attribute :The port attribute to be read * value :Pointer to the value of the attribute to be read. * * Returns :Sucess if the attribute is supported, else BadMatch * * Comments :none * *---------------------------------------------------------------------------- */ static int GX1GetPortAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 * value, pointer data) { GeodePortPrivPtr pPriv = (GeodePortPrivPtr) data; if (attribute == xvColorKey) { *value = pPriv->colorKey; } #if DBUF else if (attribute == xvDoubleBuffer) { *value = (pPriv->doubleBuffer) ? 1 : 0; } #endif else if (attribute == xvColorKeyMode) { *value = pPriv->colorKeyMode; } else if (attribute == xvFilter) { *value = pPriv->filter; } else return BadMatch; return Success; } /*---------------------------------------------------------------------------- * GX1QueryBestSize * * Description :This function provides a way to query what the destination dimensions * would end up being if they were to request that an area vid_w by vid_h * from the video stream be scaled to rectangle of drw_w by drw_h on * the screen. * * Parameters. * ScreenInfoPtr * pScrn :Screen handler pointer having screen information. * data :Pointer to the video port's private data * vid_w,vid_h :Width and height of the video data. * drw_w,drw_h :Width and height of the scaled rectangle. * p_w,p_h :Width and height of the destination rectangle. * * Returns :None * * Comments :None * *---------------------------------------------------------------------------- */ static void GX1QueryBestSize(ScrnInfoPtr pScrn, Bool motion, short vid_w, short vid_h, short drw_w, short drw_h, unsigned int *p_w, unsigned int *p_h, pointer data) { DEBUGMSG(0, (0, X_NONE, "QueryBestSize\n")); *p_w = drw_w; *p_h = drw_h; if (*p_w > 16384) *p_w = 16384; } static void GX1CopyGreyscale(unsigned char *src, unsigned char *dst, int srcPitch, int dstPitch, int h, int w) { int i; unsigned char *src2 = src; unsigned char *dst2 = dst; unsigned char *dst3; unsigned char *src3; dstPitch <<= 1; while (h--) { dst3 = dst2; src3 = src2; for (i = 0; i < w; i++) { *dst3++ = *src3++; /* Copy Y data */ *dst3++ = 0x80; /* Fill UV with 0x80 - greyscale */ } src3 = src2; for (i = 0; i < w; i++) { *dst3++ = *src3++; /* Copy Y data */ *dst3++ = 0x80; /* Fill UV with 0x80 - greyscale */ } dst2 += dstPitch; src2 += srcPitch; } } /*---------------------------------------------------------------------------- * GX1CopyData * * Description : Copies data from src to destination * * Parameters. * src : pointer to the source data * dst : pointer to destination data * srcPitch : pitch of the srcdata * dstPitch : pitch of the destination data * h & w : height and width of source data * * Returns :None * * Comments :None * *---------------------------------------------------------------------------- */ static void GX1CopyData(unsigned char *src, unsigned char *dst, int srcPitch, int dstPitch, int h, int w) { w <<= 1; while (h--) { memcpy(dst, src, w); src += srcPitch; dst += dstPitch; } } static void GX1CopyMungedData(unsigned char *src1, unsigned char *src2, unsigned char *src3, unsigned char *dst1, int srcPitch, int srcPitch2, int dstPitch, int h, int w) { CARD32 *dstCur = (CARD32 *) dst1; CARD32 *dstNext = (CARD32 *) dst1; int i, j, k, m, n; CARD32 crcb; #if XV_PROFILE long oldtime, newtime; #endif DEBUGMSG(0, (0, X_NONE, "CopyMungedData\n")); /* dstPitch is in byte count, but we write longs. * so divide dstpitch by 4 */ dstPitch >>= 2; /* Width is in byte but video data is 16bit */ w >>= 1; /* We render 2 scanlines at one shot, handle the odd count */ m = h & 1; /* decrement the height since we write 2 scans */ h -= 1; /* we traverse by 2 bytes in src Y */ srcPitch <<= 1; #if XV_PROFILE UpdateCurrentTime(); oldtime = currentTime.milliseconds; #endif for (j = 0; j < h; j += 2) { /* calc the next dest scan start */ dstNext = dstCur + dstPitch; for (i = 0; i < w; i++) { /* crcb is same for the x pixel for 2 scans */ crcb = (src3[i] << 8) | (src2[i] << 24); n = i << 1; /* write the first scan pixel DWORD */ dstCur[i] = src1[n] | (src1[n + 1] << 16) | crcb; /* calc the offset of next pixel */ k = n + srcPitch; /* write the 2nd scan pixel DWORD */ dstNext[i] = src1[k] | (src1[k + 1] << 16) | crcb; } /* increment the offsets */ /* Y */ src1 += srcPitch; /* crcb */ src2 += srcPitch2; src3 += srcPitch2; /* processed dest */ dstCur += (dstPitch << 1); } /* if any scans remaining */ if (m) { for (i = 0, k = 0; i < w; i++, k += 2) { dstCur[i] = src1[k] | (src1[k + 1] << 16) | (src3[i] << 8) | (src2[i] << 24); } } #if XV_PROFILE UpdateCurrentTime(); newtime = currentTime.milliseconds; DEBUGMSG(1, (0, X_NONE, "CMD %d\n", newtime - oldtime)); #endif } static FBAreaPtr GX1AllocateMemory(ScrnInfoPtr pScrn, FBAreaPtr area, int numlines) { ScreenPtr pScreen = screenInfo.screens[pScrn->scrnIndex]; FBAreaPtr new_area; if (area) { if ((area->box.y2 - area->box.y1) >= numlines) return area; if (xf86ResizeOffscreenArea(area, pScrn->displayWidth, numlines)) return area; xf86FreeOffscreenArea(area); } new_area = xf86AllocateOffscreenArea(pScreen, pScrn->displayWidth, numlines, 0, NULL, NULL, NULL); if (!new_area) { int max_w, max_h; xf86QueryLargestOffscreenArea(pScreen, &max_w, &max_h, 0, FAVOR_WIDTH_THEN_AREA, PRIORITY_EXTREME); if ((max_w < pScrn->displayWidth) || (max_h < numlines)) return NULL; xf86PurgeUnlockedOffscreenAreas(pScreen); new_area = xf86AllocateOffscreenArea(pScreen, pScrn->displayWidth, numlines, 0, NULL, NULL, NULL); } return new_area; } static BoxRec dstBox; static int srcPitch = 0, srcPitch2 = 0, dstPitch = 0; static INT32 Bx1, Bx2, By1, By2; static int top, left, npixels, nlines; static int offset, s1offset = 0, s2offset = 0, s3offset = 0; static unsigned char *dst_start; static int TVOverScanX; static Bool RegionsIntersect(BoxPtr pRcl1, BoxPtr pRcl2, BoxPtr pRclResult) { pRclResult->x1 = max(pRcl1->x1, pRcl2->x1); pRclResult->x2 = min(pRcl1->x2, pRcl2->x2); if (pRclResult->x1 <= pRclResult->x2) { pRclResult->y1 = max(pRcl1->y1, pRcl2->y1); pRclResult->y2 = min(pRcl1->y2, pRcl2->y2); if (pRclResult->y1 <= pRclResult->y2) { return (TRUE); } } return (FALSE); } void GX1SetVideoPosition(int x, int y, int width, int height, short src_w, short src_h, short drw_w, short drw_h, int id, int offset, ScrnInfoPtr pScrn) { GeodePtr pGeode = GEODEPTR(pScrn); long xstart, ystart, xend, yend; unsigned long lines = 0; unsigned long y_extra = 0; unsigned short crop = 0; BoxRec ovly, display, result; #if defined(STB_X) unsigned long startAddress = 0; #endif xend = x + drw_w; yend = y + drw_h; /* Take care of panning when panel is present */ #if defined(STB_X) Gal_get_display_offset(&startAddress); DeltaY = startAddress / pGeode->Pitch; DeltaX = startAddress & (pGeode->Pitch - 1); DeltaX /= (pScrn->bitsPerPixel >> 3); #endif if (pGeode->Panel) { ovly.x1 = x; ovly.x2 = x + pGeode->video_dstw; ovly.y1 = y; ovly.y2 = y + pGeode->video_dsth; display.x1 = DeltaX; display.x2 = DeltaX + pGeode->FPBX; display.y1 = DeltaY; display.y2 = DeltaY + pGeode->FPBY; x = xend = 0; if (RegionsIntersect(&display, &ovly, &result)) { x = ovly.x1 - DeltaX; xend = ovly.x2 - DeltaX; y = ovly.y1 - DeltaY; yend = ovly.y2 - DeltaY; } } /* LEFT CLIPPING */ if (x < 0) { if (TVOverScanX) xstart = TVOverScanX; else xstart = 0; } else { if (TVOverScanX) xstart = TVOverScanX; else xstart = (unsigned long)x; } drw_w -= (xstart - x); /* TOP CLIPPING */ if (y < 0) { lines = (-y) * src_h / drw_h; ystart = 0; drw_h += y; y_extra = lines * dstPitch; } else { ystart = y; lines = 0; y_extra = 0; } /* CLIP RIGHT AND BOTTOM FOR TV OVER SCAN */ if (pGeode->TV_Overscan_On) { crop = (pGeode->TVOw + pGeode->TVOx); if ((xstart + drw_w) > crop) xend = crop; crop = (pGeode->TVOh + pGeode->TVOy); if ((ystart + drw_h) > crop) yend = crop; } GFX(set_video_window(xstart, ystart, xend - xstart, yend - ystart)); GFX(set_video_offset(offset + y_extra)); GFX(set_video_left_crop(xstart - x)); } /*---------------------------------------------------------------------------- * GX1DisplayVideo * * Description : This function sets up the video registers for playing video * It sets up the video format,width, height & position of the * video window ,video offsets( y,u,v) and video pitches(y,u,v) * Parameters. * * Returns :None * * Comments :None * *---------------------------------------------------------------------------- */ static void GX1DisplayVideo(ScrnInfoPtr pScrn, int id, int offset, short width, short height, int pitch, int x1, int y1, int x2, int y2, BoxPtr dstBox, short src_w, short src_h, short drw_w, short drw_h) { GeodePtr pGeode = GEODEPTR(pScrn); /* DisplayModePtr mode = pScrn->currentMode; */ if (!pGeode->NoAccel) GX1AccelSync(pScrn); GFX(set_video_enable(1)); switch (id) { case FOURCC_UYVY: /* UYVY */ GFX(set_video_format(VIDEO_FORMAT_UYVY)); break; case FOURCC_Y800: /* Y800 - greyscale - we munge it! */ case FOURCC_YV12: case FOURCC_I420: case FOURCC_YUY2: /* YUY2 */ GFX(set_video_format(VIDEO_FORMAT_YUYV)); break; case FOURCC_Y2YU: /* Y2YU */ GFX(set_video_format(VIDEO_FORMAT_Y2YU)); break; case FOURCC_YVYU: /* YVYU */ GFX(set_video_format(VIDEO_FORMAT_YVYU)); break; } if (pGeode->TV_Overscan_On) { if (dstBox->x1 < 0) TVOverScanX = pGeode->TVOx; else TVOverScanX = 0; dstBox->x1 += pGeode->TVOx; dstBox->y1 += pGeode->TVOy; } if (pGeode->Panel) { pGeode->video_x = dstBox->x1; pGeode->video_y = dstBox->y1; pGeode->video_w = width; pGeode->video_h = height; pGeode->video_srcw = src_w; pGeode->video_srch = src_h; pGeode->video_dstw = drw_w; pGeode->video_dsth = drw_h; pGeode->video_offset = offset; pGeode->video_id = id; pGeode->video_scrnptr = pScrn; } GFX(set_video_size(width, height)); GFX(set_video_scale(width, height, drw_w, drw_h)); GX1SetVideoPosition(dstBox->x1, dstBox->y1, width, height, src_w, src_h, drw_w, drw_h, id, offset, pScrn); GFX(set_color_space_YUV(0)); } /*---------------------------------------------------------------------------- * GX1PutImage : This function writes a single frame of video into a drawable. * The position and size of the source rectangle is specified by src_x,src_y, * src_w and src_h. This data is stored in a system memory buffer at buf. * The position and size of the destination rectangle is specified by drw_x, * drw_y,drw_w,drw_h.The data is in the format indicated by the image descriptor * and represents a source of size width by height. If sync is TRUE the driver * should not return from this function until it is through reading the data from * buf. Returning when sync is TRUE indicates that it is safe for the data at buf * to be replaced,freed, or modified. * * * Description : * Parameters. * * Returns :None * * Comments :None * *---------------------------------------------------------------------------- */ static int GX1PutImage(ScrnInfoPtr pScrn, short src_x, short src_y, short drw_x, short drw_y, short src_w, short src_h, short drw_w, short drw_h, int id, unsigned char *buf, short width, short height, Bool sync, RegionPtr clipBoxes, pointer data) { GeodePortPrivPtr pPriv = (GeodePortPrivPtr) data; GeodePtr pGeode = GEODEPTR(pScrn); int pitch, new_h; #if REINIT BOOL ReInitVideo = FALSE; #endif #if XV_PROFILE long oldtime, newtime; UpdateCurrentTime(); oldtime = currentTime.milliseconds; #endif #if REINIT /* update cliplist */ if (!REGION_EQUAL(pScrn->pScreen, &pPriv->clip, clipBoxes)) { ReInitVideo = TRUE; } if (ReInitVideo) { DEBUGMSG(1, (0, X_NONE, "Regional Not Equal - Init\n")); #endif if (drw_w > 16384) drw_w = 16384; /* Clip */ Bx1 = src_x; Bx2 = src_x + src_w; By1 = src_y; By2 = src_y + src_h; if ((Bx1 >= Bx2) || (By1 >= By2)) return Success; dstBox.x1 = drw_x; dstBox.x2 = drw_x + drw_w; dstBox.y1 = drw_y; dstBox.y2 = drw_y + drw_h; dstBox.x1 -= pScrn->frameX0; dstBox.x2 -= pScrn->frameX0; dstBox.y1 -= pScrn->frameY0; dstBox.y2 -= pScrn->frameY0; pitch = pScrn->bitsPerPixel * pScrn->displayWidth >> 3; dstPitch = ((width << 1) + 3) & ~3; switch (id) { case FOURCC_YV12: case FOURCC_I420: srcPitch = (width + 3) & ~3; /* of luma */ s2offset = srcPitch * height; srcPitch2 = ((width >> 1) + 3) & ~3; s3offset = (srcPitch2 * (height >> 1)) + s2offset; break; case FOURCC_UYVY: case FOURCC_YUY2: case FOURCC_Y800: default: srcPitch = (width << 1); break; } /* Find how many pitch scanlines required to store the data */ new_h = ((dstPitch * height) + pitch - 1) / pitch; #if DBUF if (pPriv->doubleBuffer) new_h <<= 1; #endif if (!(pPriv->area = GX1AllocateMemory(pScrn, pPriv->area, new_h))) return BadAlloc; /* copy data */ top = By1; left = Bx1 & ~1; npixels = ((Bx2 + 1) & ~1) - left; switch (id) { case FOURCC_YV12: case FOURCC_I420: { int tmp; top &= ~1; offset = (pPriv->area->box.y1 * pitch) + (top * dstPitch); #if DBUF if (pPriv->doubleBuffer && pPriv->currentBuffer) offset += (new_h >> 1) * pitch; #endif dst_start = pGeode->FBBase + offset + left; tmp = ((top >> 1) * srcPitch2) + (left >> 1); s2offset += tmp; s3offset += tmp; if (id == FOURCC_I420) { tmp = s2offset; s2offset = s3offset; s3offset = tmp; } nlines = ((By2 + 1) & ~1) - top; } break; case FOURCC_UYVY: case FOURCC_YUY2: case FOURCC_Y800: default: left <<= 1; buf += (top * srcPitch) + left; nlines = By2 - top; offset = (pPriv->area->box.y1 * pitch) + (top * dstPitch); #if DBUF if (pPriv->doubleBuffer && pPriv->currentBuffer) offset += (new_h >> 1) * pitch; #endif dst_start = pGeode->FBBase + offset + left; break; } s1offset = (top * srcPitch) + left; #if REINIT /* update cliplist */ REGION_COPY(pScrn->pScreen, &pPriv->clip, clipBoxes); if (pPriv->colorKeyMode == 0) { /* draw these */ xf86XVFillKeyHelper(pScrn->pScreen, pPriv->colorKey, clipBoxes); } GX1DisplayVideo(pScrn, id, offset, width, height, dstPitch, Bx1, By1, Bx2, By2, &dstBox, src_w, src_h, drw_w, drw_h); } #endif switch (id) { case FOURCC_Y800: GX1CopyGreyscale(buf, dst_start, srcPitch, dstPitch, nlines, npixels); break; case FOURCC_YV12: case FOURCC_I420: GX1CopyMungedData(buf + s1offset, buf + s2offset, buf + s3offset, dst_start, srcPitch, srcPitch2, dstPitch, nlines, npixels); break; case FOURCC_UYVY: case FOURCC_YUY2: default: GX1CopyData(buf, dst_start, srcPitch, dstPitch, nlines, npixels); break; } #if !REINIT /* update cliplist */ REGION_COPY(pScreen, &pPriv->clip, clipBoxes); if (pPriv->colorKeyMode == 0) { /* draw these */ xf86XVFillKeyHelper(pScrn->pScreen, pPriv->colorKey, clipBoxes); } GX1DisplayVideo(pScrn, id, offset, width, height, dstPitch, Bx1, By1, Bx2, By2, &dstBox, src_w, src_h, drw_w, drw_h); #endif #if XV_PROFILE UpdateCurrentTime(); newtime = currentTime.milliseconds; DEBUGMSG(1, (0, X_NONE, "PI %d\n", newtime - oldtime)); #endif #if DBUF pPriv->currentBuffer ^= 1; #endif pPriv->videoStatus = CLIENT_VIDEO_ON; pGeode->OverlayON = TRUE; return Success; } /*---------------------------------------------------------------------------- * GX1QueryImageAttributes * * Description :This function is called to let the driver specify how data * for a particular image of size width by height should be * stored. * * Parameters. * pScreenInfo * Ptr :Screen handler pointer having screen information. * id :Id for the video format * width :width of the image (can be modified by the driver) * height :height of the image (can be modified by the driver) * Returns : Size of the memory required for storing this image * * Comments :None * *---------------------------------------------------------------------------- */ static int GX1QueryImageAttributes(ScrnInfoPtr pScrn, int id, unsigned short *w, unsigned short *h, int *pitches, int *offsets) { int size; int tmp; DEBUGMSG(0, (0, X_NONE, "QueryImageAttributes %X\n", id)); if (*w > 1024) *w = 1024; if (*h > 1024) *h = 1024; *w = (*w + 1) & ~1; if (offsets) offsets[0] = 0; switch (id) { case FOURCC_YV12: case FOURCC_I420: *h = (*h + 1) & ~1; size = (*w + 3) & ~3; if (pitches) pitches[0] = size; size *= *h; if (offsets) offsets[1] = size; tmp = ((*w >> 1) + 3) & ~3; if (pitches) pitches[1] = pitches[2] = tmp; tmp *= (*h >> 1); size += tmp; if (offsets) offsets[2] = size; size += tmp; break; case FOURCC_UYVY: case FOURCC_YUY2: case FOURCC_Y800: default: size = *w << 1; if (pitches) pitches[0] = size; size *= *h; break; } return size; } static void GX1BlockHandler(int i, pointer blockData, pointer pTimeout, pointer pReadmask) { ScreenPtr pScreen = screenInfo.screens[i]; ScrnInfoPtr pScrn = xf86Screens[i]; GeodePtr pGeode = GEODEPTR(pScrn); GeodePortPrivPtr pPriv = GET_PORT_PRIVATE(pScrn); DEBUGMSG(0, (0, X_NONE, "BlockHandler\n")); pScreen->BlockHandler = pGeode->BlockHandler; (*pScreen->BlockHandler) (i, blockData, pTimeout, pReadmask); pScreen->BlockHandler = GX1BlockHandler; if (!pGeode->NoAccel) GX1AccelSync(pScrn); if (pPriv->videoStatus & TIMER_MASK) { UpdateCurrentTime(); if (pPriv->videoStatus & OFF_TIMER) { if (pPriv->offTime < currentTime.milliseconds) { GFX(set_video_enable(0)); pPriv->videoStatus = FREE_TIMER; pPriv->freeTime = currentTime.milliseconds + FREE_DELAY; } } else { /* FREE_TIMER */ if (pPriv->freeTime < currentTime.milliseconds) { if (pPriv->area) { xf86FreeOffscreenArea(pPriv->area); pPriv->area = NULL; } pPriv->videoStatus = 0; } } } } /****************** Offscreen stuff ***************/ typedef struct { FBAreaPtr area; FBLinearPtr linear; Bool isOn; } OffscreenPrivRec, *OffscreenPrivPtr; /*---------------------------------------------------------------------------- * GX1AllocateSurface * * Description :This function allocates an area of w by h in the offscreen * Parameters. * ScreenPtr * pScreen :Screen handler pointer having screen information. * * Returns :None * * Comments :None * *---------------------------------------------------------------------------- */ static int GX1AllocateSurface(ScrnInfoPtr pScrn, int id, unsigned short w, unsigned short h, XF86SurfacePtr surface) { FBAreaPtr area; int pitch, fbpitch, numlines; OffscreenPrivPtr pPriv; DEBUGMSG(0, (0, X_NONE, "AllocateSurface %x\n", id)); if ((w > 1024) || (h > 1024)) return BadAlloc; w = (w + 1) & ~1; pitch = ((w << 1) + 15) & ~15; fbpitch = pScrn->bitsPerPixel * pScrn->displayWidth >> 3; numlines = ((pitch * h) + fbpitch - 1) / fbpitch; if (!(area = GX1AllocateMemory(pScrn, NULL, numlines))) return BadAlloc; surface->width = w; surface->height = h; if (!(surface->pitches = xalloc(sizeof(int)))) return BadAlloc; if (!(surface->offsets = xalloc(sizeof(int)))) { xfree(surface->pitches); return BadAlloc; } if (!(pPriv = xalloc(sizeof(OffscreenPrivRec)))) { xfree(surface->pitches); xfree(surface->offsets); return BadAlloc; } pPriv->area = area; pPriv->isOn = FALSE; surface->pScrn = pScrn; surface->id = id; surface->pitches[0] = pitch; surface->offsets[0] = area->box.y1 * fbpitch; surface->devPrivate.ptr = (pointer) pPriv; return Success; } static int GX1StopSurface(XF86SurfacePtr surface) { OffscreenPrivPtr pPriv = (OffscreenPrivPtr) surface->devPrivate.ptr; if (pPriv->isOn) { pPriv->isOn = FALSE; } return Success; } static int GX1FreeSurface(XF86SurfacePtr surface) { OffscreenPrivPtr pPriv = (OffscreenPrivPtr) surface->devPrivate.ptr; DEBUGMSG(0, (0, X_NONE, "FreeSurface\n")); if (pPriv->isOn) GX1StopSurface(surface); xf86FreeOffscreenArea(pPriv->area); xfree(surface->pitches); xfree(surface->offsets); xfree(surface->devPrivate.ptr); return Success; } static int GX1GetSurfaceAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 * value) { return GX1GetPortAttribute(pScrn, attribute, value, (pointer) (GET_PORT_PRIVATE(pScrn))); } static int GX1SetSurfaceAttribute(ScrnInfoPtr pScrn, Atom attribute, INT32 value) { return GX1SetPortAttribute(pScrn, attribute, value, (pointer) (GET_PORT_PRIVATE(pScrn))); } static int GX1DisplaySurface(XF86SurfacePtr surface, short src_x, short src_y, short drw_x, short drw_y, short src_w, short src_h, short drw_w, short drw_h, RegionPtr clipBoxes) { OffscreenPrivPtr pPriv = (OffscreenPrivPtr) surface->devPrivate.ptr; ScrnInfoPtr pScrn = surface->pScrn; GeodePortPrivPtr portPriv = GET_PORT_PRIVATE(pScrn); INT32 x1, y1, x2, y2; BoxRec dstBox; DEBUGMSG(0, (0, X_NONE, "DisplaySuface\n")); x1 = src_x; x2 = src_x + src_w; y1 = src_y; y2 = src_y + src_h; dstBox.x1 = drw_x; dstBox.x2 = drw_x + drw_w; dstBox.y1 = drw_y; dstBox.y2 = drw_y + drw_h; if ((x1 >= x2) || (y1 >= y2)) return Success; dstBox.x1 -= pScrn->frameX0; dstBox.x2 -= pScrn->frameX0; dstBox.y1 -= pScrn->frameY0; dstBox.y2 -= pScrn->frameY0; xf86XVFillKeyHelper(pScrn->pScreen, portPriv->colorKey, clipBoxes); GX1DisplayVideo(pScrn, surface->id, surface->offsets[0], surface->width, surface->height, surface->pitches[0], x1, y1, x2, y2, &dstBox, src_w, src_h, drw_w, drw_h); pPriv->isOn = TRUE; if (portPriv->videoStatus & CLIENT_VIDEO_ON) { REGION_EMPTY(pScrn->pScreen, &portPriv->clip); UpdateCurrentTime(); portPriv->videoStatus = FREE_TIMER; portPriv->freeTime = currentTime.milliseconds + FREE_DELAY; } return Success; } /*---------------------------------------------------------------------------- * GX1InitOffscreenImages * * Description :This function sets up the offscreen memory management.It fills * in the XF86OffscreenImagePtr structure with functions to handle * offscreen memory operations. * * Parameters. * ScreenPtr * pScreen :Screen handler pointer having screen information. * * Returns : None * * Comments :None * *---------------------------------------------------------------------------- */ static void GX1InitOffscreenImages(ScreenPtr pScreen) { XF86OffscreenImagePtr offscreenImages; DEBUGMSG(0, (0, X_NONE, "InitOffscreenImages\n")); /* need to free this someplace */ if (!(offscreenImages = xalloc(sizeof(XF86OffscreenImageRec)))) return; offscreenImages[0].image = &Images[0]; offscreenImages[0].flags = VIDEO_OVERLAID_IMAGES | VIDEO_CLIP_TO_VIEWPORT; offscreenImages[0].alloc_surface = GX1AllocateSurface; offscreenImages[0].free_surface = GX1FreeSurface; offscreenImages[0].display = GX1DisplaySurface; offscreenImages[0].stop = GX1StopSurface; offscreenImages[0].setAttribute = GX1SetSurfaceAttribute; offscreenImages[0].getAttribute = GX1GetSurfaceAttribute; offscreenImages[0].max_width = 1024; offscreenImages[0].max_height = 1024; offscreenImages[0].num_attributes = NUM_ATTRIBUTES; offscreenImages[0].attributes = Attributes; xf86XVRegisterOffscreenImages(pScreen, offscreenImages, 1); }