1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/* $XConsortium: ct_BltHiQV.h /main/2 1996/10/25 10:28:43 kaleb $ */
/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/chips/ct_BltHiQV.h,v 1.10 2000/12/06 15:35:12 eich Exp $ */
/* Definitions for the Chips and Technology BitBLT engine communication. */
/* These are done using Memory Mapped IO, of the registers */
/* BitBLT modes for register 93D0. */
#define ctPATCOPY 0xF0
#define ctLEFT2RIGHT 0x000
#define ctRIGHT2LEFT 0x100
#define ctTOP2BOTTOM 0x000
#define ctBOTTOM2TOP 0x200
#define ctSRCSYSTEM 0x400
#define ctDSTSYSTEM 0x800
#define ctSRCMONO 0x1000
#define ctBGTRANSPARENT 0x22000
#define ctCOLORTRANSENABLE 0x4000
#define ctCOLORTRANSDISABLE 0x0
#define ctCOLORTRANSDST 0x8000
#define ctCOLORTRANSROP 0x0
#define ctCOLORTRANSEQUAL 0x10000L
#define ctCOLORTRANSNEQUAL 0x0
#define ctPATMONO 0x40000L
#define ctPATSOLID 0x80000L
#define ctPATSTART0 0x000000L
#define ctPATSTART1 0x100000L
#define ctPATSTART2 0x200000L
#define ctPATSTART3 0x300000L
#define ctPATSTART4 0x400000L
#define ctPATSTART5 0x500000L
#define ctPATSTART6 0x600000L
#define ctPATSTART7 0x700000L
#define ctSRCFG 0x000000L /* Where is this for the 65550?? */
/* The Monochrome expansion register setup */
#define ctCLIPLEFT(clip) ((clip)&0x3F)
#define ctCLIPRIGHT(clip) (((clip)&0x3F) << 8)
#define ctSRCDISCARD(clip) (((clip)&0x3F) << 16)
#define ctBITALIGN 0x1000000L
#define ctBYTEALIGN 0x2000000L
#define ctWORDALIGN 0x3000000L
#define ctDWORDALIGN 0x4000000L
#define ctQWORDALIGN 0x5000000L
/* This shouldn't be used because not all chip rev's
* have BR09 and BR0A, and I haven't even defined
* macros to write to these registers
*/
#define ctEXPCOLSEL 0x8000000L
/* Macros to do useful things with the C&T BitBLT engine */
/* For some odd reason the blitter busy bit occasionly "locks up" when
* it gets polled to fast. However I have observed this behavior only
* when doing ScreenToScreenColorExpandFill on a 65550. This operation
* was broken anyway (the source offest register is not observed) therefore
* no action was taken.
*
* This function uses indirect access to XR20 to test whether the blitter
* is busy. If the cost of doing this is too high then other options will
* need to be considered.
*
* Note that BR04[31] can't be used as some C&T chipsets lockup when reading
* the BRxx registers.
*/
#define ctBLTWAIT \
{int timeout; \
timeout = 0; \
for (;;) { \
if (cPtr->Chipset >= CHIPS_CT69000 ) { \
if (!(MMIO_IN32(cPtr->MMIOBase,BR(0x4))&(1<<31)))\
break; \
} else { \
if (!(cPtr->readXR(cPtr,0x20) & 0x1)) break; \
} \
timeout++; \
if ((cPtr->Chipset < CHIPS_CT69000 && \
(timeout > 100000)) || timeout > 300000) { \
unsigned char tmp; \
ErrorF("timeout\n"); \
tmp = cPtr->readXR(cPtr, 0x20); \
cPtr->writeXR(cPtr, 0x20, ((tmp & 0xFD) | 0x2)); \
xf86UDelay(10000); \
cPtr->writeXR(cPtr, 0x20, (tmp & 0xFD)); \
break; \
} \
} \
}
#define ctSETROP(op) \
MMIO_OUT32(cPtr->MMIOBase, BR(0x4), op)
#define ctSETMONOCTL(op) \
MMIO_OUT32(cPtr->MMIOBase, BR(0x3), op)
#define ctSETSRCADDR(srcAddr) \
MMIO_OUT32(cPtr->MMIOBase, BR(0x6), (srcAddr)&0x7FFFFFL)
#define ctSETDSTADDR(dstAddr) \
MMIO_OUT32(cPtr->MMIOBase, BR(0x7), (dstAddr)&0x7FFFFFL)
#define ctSETPITCH(srcPitch,dstPitch) \
MMIO_OUT32(cPtr->MMIOBase, BR(0x0), (((dstPitch)&0xFFFF)<<16)| \
((srcPitch)&0xFFFF))
#define ctSETHEIGHTWIDTHGO(Height,Width)\
MMIO_OUT32(cPtr->MMIOBase, BR(0x8), (((Height)&0xFFFF)<<16)| \
((Width)&0xFFFF))
#define ctSETPATSRCADDR(srcAddr)\
MMIO_OUT32(cPtr->MMIOBase, BR(0x5), (srcAddr)&0x7FFFFFL)
#define ctSETBGCOLOR8(c) {\
if ((cAcl->bgColor != (c)) || (cAcl->bgColor == -1)) { \
cAcl->bgColor = (c); \
MMIO_OUT32(cPtr->MMIOBase, BR(0x1), ((c)&0xFF)); \
} \
}
#define ctSETBGCOLOR16(c) {\
if ((cAcl->bgColor != (c)) || (cAcl->bgColor == -1)) { \
cAcl->bgColor = (c); \
MMIO_OUT32(cPtr->MMIOBase, BR(0x1), ((c)&0xFFFF)); \
} \
}
#define ctSETBGCOLOR24(c) {\
if ((cAcl->bgColor != (c)) || (cAcl->bgColor == -1)) { \
cAcl->bgColor = (c); \
MMIO_OUT32(cPtr->MMIOBase, BR(0x1), ((c)&0xFFFFFF)); \
} \
}
#define ctSETFGCOLOR8(c) {\
if ((cAcl->fgColor != (c)) || (cAcl->fgColor == -1)) { \
cAcl->fgColor = (c); \
MMIO_OUT32(cPtr->MMIOBase, BR(0x2), ((c)&0xFF)); \
} \
}
#define ctSETFGCOLOR16(c) {\
if ((cAcl->fgColor != (c)) || (cAcl->fgColor == -1)) { \
cAcl->fgColor = (c); \
MMIO_OUT32(cPtr->MMIOBase, BR(0x2), ((c)&0xFFFF)); \
} \
}
#define ctSETFGCOLOR24(c) {\
if ((cAcl->fgColor != (c)) || (cAcl->fgColor == -1)) { \
cAcl->fgColor = (c); \
MMIO_OUT32(cPtr->MMIOBase, BR(0x2), ((c)&0xFFFFFF)); \
} \
}
/* Define a Macro to replicate a planemask 64 times and write to address
* allocated for planemask pattern */
#define ctWRITEPLANEMASK8(mask,addr) { \
if (cAcl->planemask != (mask&0xFF)) { \
cAcl->planemask = (mask&0xFF); \
memset((unsigned char *)cPtr->FbBase + addr, (mask&0xFF), 64); \
} \
}
#define ctWRITEPLANEMASK16(mask,addr) { \
if (cAcl->planemask != (mask&0xFFFF)) { \
cAcl->planemask = (mask&0xFFFF); \
{ int i; \
for (i = 0; i < 64; i++) { \
memcpy((unsigned char *)cPtr->FbBase + addr \
+ i * 2, &mask, 2); \
} \
} \
} \
}
|
