/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/chips/util/modClock.c,v 1.6 2001/11/16 21:13:34 tsi Exp $ */ #ifdef __NetBSD__ # include # include # include #else # if defined(SVR4) && defined(i386) # include # ifdef NCR /* broken NCR */ # define __STDC # include # undef __STDC # else # include # endif # ifdef SVR4 # if !defined(sun) # include # endif # endif # include # if defined(sun) # include # endif # endif # include "AsmMacros.h" #endif /* NetBSD */ #include #include #include #ifndef Lynx #include #endif #ifdef __NetBSD__ # define SET_IOPL() i386_iopl(3) # define RESET_IOPL() i386_iopl(0) #else # if defined(SVR4) && defined(i386) # ifndef SI86IOPL # define SET_IOPL() sysi86(SI86V86,V86SC_IOPL,PS_IOPL) # define RESET_IOPL() sysi86(SI86V86,V86SC_IOPL,0) # else # define SET_IOPL() sysi86(SI86IOPL,3) # define RESET_IOPL() sysi86(SI86IOPL,0) # endif # else # ifdef linux # define SET_IOPL() iopl(3) # define RESET_IOPL() iopl(0) # else # define SET_IOPL() (void)0 # define RESET_IOPL() (void)0 # endif # endif #endif #define tolerance 0.01 /* +/- 1% */ #define CT65520 0x1 #define CT65525 0x2 #define CT65530 0x3 #define CT64200 0x4 #define CT65535 0x11 #define CT65540 0x12 #define CT65545 0x13 #define CT65546 0x14 #define CT65548 0x15 #define CT64300 0x16 #define CT65550 0x31 #define CT65554 0x32 #define CT65555 0x33 #define CT68554 0x34 #define CT69000 0x35 #define CT69030 0x36 #define IS_Programmable(X) X&0x10 #define IS_HiQV(X) X&0x20 #define DotClk 0 #define MemClk 1 #define IS_MemClk(X) X&0x1 int compute_clock ( unsigned int ChipType, double target, double Fref, unsigned int ClkMaxN, unsigned int ClkMaxM, unsigned int *bestM, unsigned int *bestN, unsigned int *bestP, unsigned int *bestPSN) { unsigned int M, N, P, PSN, PSNx; double bestError = 0, abest = 42, bestFout = 0; double Fvco, Fout; double error, aerror; unsigned int M_min = 3; unsigned int M_max = ClkMaxM; if (target < 1e6){ fprintf (stderr, "MHz assumed, changed to %g MHz\n", target); target *= 1e6; } if (target > 220.0e6) { fprintf (stderr, "too large\n"); return 1; } /* Other parameters available onthe 65548 but not the 65545, and not documented in the Clock Synthesizer doc in rev 1.0 of the 65548 datasheet: + XR30[4] = 0, VCO divider loop uses divide by 4 (same as 65545) 1, VCO divider loop uses divide by 16 + XR30[5] = 1, reference clock is divided by 5 I haven't put in any support for those here. For simplicity, they should be set to 0 on the 65548, and left untouched on earlier chips. */ for (PSNx = ((ChipType == CT69000) || (ChipType == CT69030)) ? 1 : 0; PSNx <= 1; PSNx++) { unsigned int low_N, high_N; double Fref4PSN; PSN = PSNx ? 1 : 4; low_N = 3; high_N = ClkMaxN; while (Fref / (PSN * low_N) > (((ChipType == CT69000) || (ChipType == CT69030)) ? 5.0e6 : 2.0e6)) low_N++; while (Fref / (PSN * high_N) < 150.0e3) high_N--; Fref4PSN = Fref * 4 / PSN; for (N = low_N; N <= high_N; N++) { double tmp = Fref4PSN / N; for (P = (IS_HiQV(ChipType) && (ChipType != CT69000) && (ChipType != CT69030)) ? 1 : 0; P <= 5; P++) { double Fvco_desired = target * (1 << P); double M_desired = Fvco_desired / tmp; /* Which way will M_desired be rounded? Do all three just to be safe. */ unsigned int M_low = M_desired - 1; unsigned int M_hi = M_desired + 1; if (M_hi < M_min || M_low > M_max) continue; if (M_low < M_min) M_low = M_min; if (M_hi > M_max) M_hi = M_max; for (M = M_low; M <= M_hi; M++) { Fvco = tmp * M; if (Fvco <= ((ChipType == CT69000) || (ChipType == CT69030) ? 100e6 : 48.0e6)) continue; if (Fvco > 220.0e6) break; Fout = Fvco / (1 << P); error = (target - Fout) / target; aerror = (error < 0) ? -error : error; if (aerror < abest) { abest = aerror; bestError = error; *bestM = M; *bestN = N; *bestP = P; *bestPSN = PSN; bestFout = Fout; } } } } } if (abest < tolerance) { printf ("best: M=%d N=%d P=%d PSN=%d\n", *bestM, *bestN, *bestP, *bestPSN); if (bestFout > 1.0e6) printf ("Fout = %g MHz", bestFout / 1.0e6); else if (bestFout > 1.0e3) printf ("Fout = %g kHz", bestFout / 1.0e3); else printf ("Fout = %g Hz", bestFout); printf (", error = %g\n", bestError); return 0; } printf ("can't do it with less than %g error\n", bestError); return 1; } int set_clock( unsigned int ChipType, unsigned int ClockType, unsigned int ProgClock, unsigned int M, unsigned int N, unsigned int P, unsigned int PSN) { unsigned int tmp, idx; SET_IOPL(); idx = inb(0x3D6); if (IS_HiQV(ChipType)) { if (IS_MemClk(ClockType)) { printf ("XRCC = 0x%02X\n", M - 2); printf ("XRCD = 0x%02X\n", N - 2); printf ("XRCE = 0x%02X\n", (0x80 | (P * 16 + (PSN == 1)))); outb(0x3D6, 0xCE); /* Select Fix MClk before */ tmp = inb(0x3D7); outb(0x3D7, tmp & 0x7F); outb(0x3D6, 0xCC); outb(0x3D7, (M - 2)); outb(0x3D6, 0xCD); outb(0x3D7, (N - 2)); outb(0x3D6, 0xCE); outb(0x3D7, (0x80 | (P * 16 + (PSN == 1)))); } else { printf ("XR%X = 0x%02X\n", 0xC0 + 4 * ProgClock, M - 2); printf ("XR%X = 0x%02X\n", 0xC1 + 4 * ProgClock, N - 2); printf ("XR%X = 0x%02X\n", 0xC2 + 4 * ProgClock, 0); printf ("XR%X = 0x%02X\n", 0xC3 + 4 * ProgClock, P * 16 + (PSN == 1)); outb(0x3D6, 0xC0 + 4 * ProgClock); outb(0x3D7, (M - 2)); outb(0x3D6, 0xC1 + 4 * ProgClock); outb(0x3D7, (N - 2)); outb(0x3D6, 0xC2 + 4 * ProgClock); outb(0x3D7, 0x0); outb(0x3D6, 0xC3 + 4 * ProgClock); outb(0x3D7, (P * 16 + (PSN == 1))); } } else { printf ("XR30 = 0x%02X\n", P * 2 + (PSN == 1)); printf ("XR31 = 0x%02X\n", M - 2); printf ("XR32 = 0x%02X\n", N - 2); outb(0x3D6, 0x33); tmp = inb(0x3D7); if (IS_MemClk(ClockType)) { outb(0x3D7, tmp | 0x20); } else { outb(0x3D7, tmp & ~0x20); } outb(0x3D6, 0x30); outb(0x3D7, (P * 2 + (PSN == 1))); outb(0x3D6, 0x31); outb(0x3D7, (M - 2)); outb(0x3D6, 0x32); outb(0x3D7, (N - 2)); outb(0x3D6, 0x33); outb(0x3D7, tmp); } outb(0x3D6, idx); RESET_IOPL(); return 0; } unsigned int probe_chip(void) { unsigned int ChipType, temp; SET_IOPL(); outb(0x3D6, 0x00); temp = inb(0x3D7); ChipType = 0; if (temp != 0xA5) { if ((temp & 0xF0) == 0x70) { ChipType = CT65520; } if ((temp & 0xF0) == 0x80) { /* could also be a 65525 */ ChipType = CT65530; } if ((temp & 0xF0) == 0xA0) { ChipType = CT64200; } if ((temp & 0xF0) == 0xB0) { ChipType = CT64300; } if ((temp & 0xF0) == 0xC0) { ChipType = CT65535; } if ((temp & 0xF8) == 0xD0) { ChipType = CT65540; } if ((temp & 0xF8) == 0xD8) { switch (temp & 0x07) { case 3: ChipType = CT65546; break; case 4: ChipType = CT65548; break; default: ChipType = CT65545; } } } /* At this point the chip could still be a HiQV, so check for * that. This test needs some looking at */ if ((temp != 0) && (ChipType == 0)) { outb(0x3D6, 0x02); temp = inb(0x03D7); if (temp == 0xE0) { ChipType = CT65550; } if (temp == 0xE4) { ChipType = CT65554; } if (temp == 0xE5) { ChipType = CT65555; } if (temp == 0xF4) { ChipType = CT68554; } if (temp == 0xC0) { ChipType = CT69000; } if (temp == 0x30) { outb(0x3D6, 0x03); temp = inb(0x03D7); if (temp == 0x0C) ChipType = CT69030; } } RESET_IOPL(); if (ChipType == 0) { /* failure */ fprintf(stderr, "Not a Chips and Technologies Chipset\n"); } return ChipType; } int main (int argc, char *argv[]) { double target; double Fref = 14318180; unsigned int M, N, P, PSN, ChipType, ClockType, progclock; switch (argc) { case 2: progclock = 2; target = atof (argv[1]); break; case 3: progclock = abs(atof (argv[1])); target = atof (argv[2]); break; default: fprintf (stderr, "usage: %s [-0|-1|-2] freq\n", argv[0]); return 1; } ClockType = DotClk; #ifndef Lynx if (! fnmatch("*memClock",argv[0],FNM_PATHNAME)) { #else if (strstr("memClock",argv[0]) != NULL) { #endif ClockType = MemClk; } ChipType = probe_chip(); if (!ChipType) { return 1; } if (! IS_Programmable(ChipType)) { fprintf(stderr, "No programmable Clock!\n"); return 1; } if (IS_HiQV(ChipType)) { if (! compute_clock(ChipType, target, Fref, 63, 127, &M, &N, &P, &PSN)) { return set_clock(ChipType, ClockType, progclock, M, N, P, PSN); } else { return 1; } } else { if (! compute_clock(ChipType, target, Fref, 127, 127, &M, &N, &P, &PSN)) { return set_clock(ChipType, ClockType, progclock, M, N, P, PSN); } else { return 1; } } }