1 files changed, 0 insertions, 102 deletions
diff --git a/Download.moin b/Download.moin
deleted file mode 100644
index 82a8166..0000000
--- a/Download.moin
+++ /dev/null
@@ -1,102 +0,0 @@
-'''Contents'''
-<<TableOfContents>>
-= Source =
-The components of the DRI have been moved into their respective upstream repositories.  The DRI drivers reside within Mesa, and the 2D drivers reside in [X.Org http://www.x.org/].  The remaining component is the DRM, which is maintained in a git tree on freedesktop.org.
-
-== git ==
-
-To check out the drm code:
-
-{{{
-git clone git://anongit.freedesktop.org/git/mesa/drm
-}}}
-
-== cgit ==
- 
-The source and history can be viewed on the web at http://cgit.freedesktop.org/mesa/drm/
-  
-== Building from git ==
-
-See the [[Building]] page.
- 
-== Releases ==
-
-The release tarballs are available at http://dri.freedesktop.org/libdrm/
-
-= Binaries =
- 
-== Snapshots ==
-
-'''Note: Binary snapshots that are currently available for download are not up-to-date.''' They are likely to have bugs that are fixed in CVS/GIT in the mean time. '''Please do not report bugs against them.'''
-
-'''Note: Binary snapshots are currently not being built.''' The value of binary snapshots with modular Xorg is questionable and technical problems make it very hard to build one snapshot that works with both modular and monolithic Xorg.
-
-Nightly snapshots of the DRI drivers for Linux are available from [[http://dri.freedesktop.org/snapshots/]]. You need to download and install the correct snapshot for your graphics card and a "common" snapshot in order to get all new DRI features. The "common" snapshot does not need to be updated as frequently as the card-specific snapshot.
- 
-'''Note:''' If you are using a radeon 8500 or higher (8500, 8700, 9000, 9100, 9200, IGP9100, etc.) choose the r200 shapshot, otherwise choose radeon (7000, 7200, 7500, IGP320, IGP340, etc.).
- 
-'''Note:''' If you have a i830/45/55 graphics chip you now need the i915 snapshot. The i830 driver is deprecated and no new snapshots are produced for it.
- 
-=== Upgrading to X.org 6.9 CVS ===
- 
-Binary snapshots only work with a recent X.org X server. If you're running a version of XFree86 or X.org older than 6.9 RC1 then you must install an [[http://dri.freedesktop.org/snapshots/extras/Xorg.bz2|X.org server (Xorg.bz2)]] and [[http://dri.freedesktop.org/snapshots/extras/modules.tar.bz2|driver modules (Xorg-modules.tar.bz2)]].
- 
-'''Note:''' It is important that you install X.org ''before'' you install the actual binary snapshots.
- 
-'''Note:''' After installing this upgrade X.org will have no graphics drivers. You need to install the snapshots (both common and the one for your graphics card) in order to make X.org work.
- 
-This is how you install Xorg and modules.tar.bz2:
- 
- * Download `Xorg.bz2` and `modules.tar.bz2`.
- * Make a backup of `/usr/X11R6/lib/modules` and `usr/X11R6/bin/Xorg` (if present) and move them out of the way.
- * Uncompress `Xorg.bz2`, copy it to `/usr/X11R6/bin` and set permissions.
- * Uncompress `Xorg-modules.tar.bz2` in `/usr/X11R6/lib`.
- * Make a symbolic link from `/etc/X11/X` to `/usr/X11R6/bin/Xorg` if it's not there yet or points somewhere else.
- * If needed copy `XF86Config-4` to `xorg.conf` and change the keyboard driver from "keyboard" to "kbd".
- 
-The following sequence of commands should work in bash:
- 
-{{{
-wget http://dri.freedesktop.org/snapshots/extras/Xorg.bz2
-wget http://dri.freedesktop.org/snapshots/extras/modules.tar.bz2
- 
-mv -f /usr/X11R6/bin/Xorg /usr/X11R6/bin/Xorg.backup
-bzip2 -d Xorg.bz2
-cp Xorg /usr/X11R6/bin
-chmod 4755 /usr/X11R6/bin/Xorg
- 
-mv /usr/X11R6/lib/modules /usr/X11R6/lib/modules.backup
-tar -C /usr/X11R6/lib -xjf modules.tar.bz2
- 
-cd /etc/X11
-rm X
-ln -s /usr/X11R6/bin/Xorg X
-if [ -f XF86Config-4 ]; then cp XF86Config-4 xorg.conf; fi
-<edit xorg.conf>
-}}}
- 
-== Debian packages ==
-
-The Xorg packages in Debian unstable can be used with the binary snapshots.
-
-{{{
-# cat >> /etc/apt/sources.list
-deb http://ftp.debian.org/debian/ unstable main
-^D
-# apt-get update
-# apt-get -t unstable install xserver-xorg
-}}}
-
-You'll need the linux-headers package for your kernel installed in order to compile the kernel modules:
-
-{{{
-# apt-get install linux-headers-`uname -r`
-}}}
-
-Then just follow the instructions for installing the snapshots as above.
-
-= Configuration GUI =
-
-The DRI configuration GUI DriConf is available for download from http://dri.freedesktop.org/~fxkuehl/driconf. There are versions available for gtk-1.2 and gtk-2. If you're unsure which version to download check out the DriConf page. It also contains installation instructions and links to the most recent versions.
-----
-http://dri.sourceforge.net/cgi-bin/moin.cgi/RecentChanges