From 62c552ccc3eda1198632a4f344aa32623d226bab Mon Sep 17 00:00:00 2001 From: Bojan Smojver Date: Sat, 16 Jun 2012 00:09:58 +0200 Subject: PM / Hibernate: Enable suspend to both for in-kernel hibernation. It is often useful to suspend to memory after hibernation image has been written to disk. If the battery runs out or power is otherwise lost, the computer will resume from the hibernated image. If not, it will resume from memory and hibernation image will be discarded. Signed-off-by: Bojan Smojver Signed-off-by: Rafael J. Wysocki --- kernel/power/hibernate.c | 36 ++++++++++++++++++++++++++++++++++++ kernel/power/power.h | 3 +++ kernel/power/swap.c | 28 ++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+) (limited to 'kernel/power') diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 8b53db38a279..21ad3fe3164f 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -5,6 +5,7 @@ * Copyright (c) 2003 Open Source Development Lab * Copyright (c) 2004 Pavel Machek * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc. + * Copyright (C) 2012 Bojan Smojver * * This file is released under the GPLv2. */ @@ -46,6 +47,9 @@ enum { HIBERNATION_PLATFORM, HIBERNATION_SHUTDOWN, HIBERNATION_REBOOT, +#ifdef CONFIG_SUSPEND + HIBERNATION_SUSPEND, +#endif /* keep last */ __HIBERNATION_AFTER_LAST }; @@ -574,6 +578,10 @@ int hibernation_platform_enter(void) */ static void power_down(void) { +#ifdef CONFIG_SUSPEND + int error; +#endif + switch (hibernation_mode) { case HIBERNATION_REBOOT: kernel_restart(NULL); @@ -583,6 +591,25 @@ static void power_down(void) case HIBERNATION_SHUTDOWN: kernel_power_off(); break; +#ifdef CONFIG_SUSPEND + case HIBERNATION_SUSPEND: + error = suspend_devices_and_enter(PM_SUSPEND_MEM); + if (error) { + if (hibernation_ops) + hibernation_mode = HIBERNATION_PLATFORM; + else + hibernation_mode = HIBERNATION_SHUTDOWN; + power_down(); + } + /* + * Restore swap signature. + */ + error = swsusp_unmark(); + if (error) + printk(KERN_ERR "PM: Swap will be unusable! " + "Try swapon -a.\n"); + return; +#endif } kernel_halt(); /* @@ -827,6 +854,9 @@ static const char * const hibernation_modes[] = { [HIBERNATION_PLATFORM] = "platform", [HIBERNATION_SHUTDOWN] = "shutdown", [HIBERNATION_REBOOT] = "reboot", +#ifdef CONFIG_SUSPEND + [HIBERNATION_SUSPEND] = "suspend", +#endif }; /* @@ -867,6 +897,9 @@ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, switch (i) { case HIBERNATION_SHUTDOWN: case HIBERNATION_REBOOT: +#ifdef CONFIG_SUSPEND + case HIBERNATION_SUSPEND: +#endif break; case HIBERNATION_PLATFORM: if (hibernation_ops) @@ -907,6 +940,9 @@ static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, switch (mode) { case HIBERNATION_SHUTDOWN: case HIBERNATION_REBOOT: +#ifdef CONFIG_SUSPEND + case HIBERNATION_SUSPEND: +#endif hibernation_mode = mode; break; case HIBERNATION_PLATFORM: diff --git a/kernel/power/power.h b/kernel/power/power.h index b0bd4beaebfe..7d4b7ffb3c1d 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -156,6 +156,9 @@ extern void swsusp_free(void); extern int swsusp_read(unsigned int *flags_p); extern int swsusp_write(unsigned int flags); extern void swsusp_close(fmode_t); +#ifdef CONFIG_SUSPEND +extern int swsusp_unmark(void); +#endif /* kernel/power/block_io.c */ extern struct block_device *hib_resume_bdev; diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 11e22c068e8b..83d505142b00 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -1472,6 +1472,34 @@ void swsusp_close(fmode_t mode) blkdev_put(hib_resume_bdev, mode); } +/** + * swsusp_unmark - Unmark swsusp signature in the resume device + */ + +#ifdef CONFIG_SUSPEND +int swsusp_unmark(void) +{ + int error; + + hib_bio_read_page(swsusp_resume_block, swsusp_header, NULL); + if (!memcmp(HIBERNATE_SIG,swsusp_header->sig, 10)) { + memcpy(swsusp_header->sig,swsusp_header->orig_sig, 10); + error = hib_bio_write_page(swsusp_resume_block, + swsusp_header, NULL); + } else { + printk(KERN_ERR "PM: Cannot find swsusp signature!\n"); + error = -ENODEV; + } + + /* + * We just returned from suspend, we don't need the image any more. + */ + free_all_swap_pages(root_swap); + + return error; +} +#endif + static int swsusp_header_init(void) { swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL); -- cgit v1.2.3 From 443772d408a25af62498793f6f805ce3c559309a Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Sat, 16 Jun 2012 15:30:45 +0200 Subject: ftrace: Disable function tracing during suspend/resume and hibernation, again If function tracing is enabled for some of the low-level suspend/resume functions, it leads to triple fault during resume from suspend, ultimately ending up in a reboot instead of a resume (or a total refusal to come out of suspended state, on some machines). This issue was explained in more detail in commit f42ac38c59e0a03d (ftrace: disable tracing for suspend to ram). However, the changes made by that commit got reverted by commit cbe2f5a6e84eebb (tracing: allow tracing of suspend/resume & hibernation code again). So, unfortunately since things are not yet robust enough to allow tracing of low-level suspend/resume functions, suspend/resume is still broken when ftrace is enabled. So fix this by disabling function tracing during suspend/resume & hibernation. Signed-off-by: Srivatsa S. Bhat Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki --- kernel/power/hibernate.c | 6 ++++++ kernel/power/suspend.c | 3 +++ 2 files changed, 9 insertions(+) (limited to 'kernel/power') diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 21ad3fe3164f..0d4b354bc1be 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -358,6 +358,7 @@ int hibernation_snapshot(int platform_mode) } suspend_console(); + ftrace_stop(); pm_restrict_gfp_mask(); error = dpm_suspend(PMSG_FREEZE); @@ -383,6 +384,7 @@ int hibernation_snapshot(int platform_mode) if (error || !in_suspend) pm_restore_gfp_mask(); + ftrace_start(); resume_console(); dpm_complete(msg); @@ -485,6 +487,7 @@ int hibernation_restore(int platform_mode) pm_prepare_console(); suspend_console(); + ftrace_stop(); pm_restrict_gfp_mask(); error = dpm_suspend_start(PMSG_QUIESCE); if (!error) { @@ -492,6 +495,7 @@ int hibernation_restore(int platform_mode) dpm_resume_end(PMSG_RECOVER); } pm_restore_gfp_mask(); + ftrace_start(); resume_console(); pm_restore_console(); return error; @@ -518,6 +522,7 @@ int hibernation_platform_enter(void) entering_platform_hibernation = true; suspend_console(); + ftrace_stop(); error = dpm_suspend_start(PMSG_HIBERNATE); if (error) { if (hibernation_ops->recover) @@ -561,6 +566,7 @@ int hibernation_platform_enter(void) Resume_devices: entering_platform_hibernation = false; dpm_resume_end(PMSG_RESTORE); + ftrace_start(); resume_console(); Close: diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 396d262b8fd0..c8b7446b27df 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include "power.h" @@ -212,6 +213,7 @@ int suspend_devices_and_enter(suspend_state_t state) goto Close; } suspend_console(); + ftrace_stop(); suspend_test_start(); error = dpm_suspend_start(PMSG_SUSPEND); if (error) { @@ -231,6 +233,7 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_test_start(); dpm_resume_end(PMSG_RESUME); suspend_test_finish("resume devices"); + ftrace_start(); resume_console(); Close: if (suspend_ops->end) -- cgit v1.2.3 From 4b7760ba0dd3319f66886ab2335a0fbecdbc808a Mon Sep 17 00:00:00 2001 From: Sameer Nanda Date: Tue, 19 Jun 2012 22:23:33 +0200 Subject: PM / Sleep: add knob for printing device resume times Added a new knob called /sys/power/pm_print_times. Setting it to 1 enables printing of time taken by devices to suspend and resume. Setting it to 0 disables this printing (unless overridden by initcall_debug kernel command line option). Signed-off-by: Sameer Nanda Acked-by: Greg KH Signed-off-by: Rafael J. Wysocki --- Documentation/ABI/testing/sysfs-power | 13 +++++++++++++ drivers/base/power/main.c | 4 ++-- drivers/base/power/power.h | 11 +++++++++++ kernel/power/main.c | 33 +++++++++++++++++++++++++++++++++ 4 files changed, 59 insertions(+), 2 deletions(-) (limited to 'kernel/power') diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 31725ffeeb3a..217772615d02 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -231,3 +231,16 @@ Description: Reads from this file return a string consisting of the names of wakeup sources created with the help of /sys/power/wake_lock that are inactive at the moment, separated with spaces. + +What: /sys/power/pm_print_times +Date: May 2012 +Contact: Sameer Nanda +Description: + The /sys/power/pm_print_times file allows user space to + control whether the time taken by devices to suspend and + resume is printed. These prints are useful for hunting down + devices that take too long to suspend or resume. + + Writing a "1" enables this printing while writing a "0" + disables it. The default value is "0". Reading from this file + will display the current value. diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 9cb845e49334..6e4db96958d1 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -166,7 +166,7 @@ static ktime_t initcall_debug_start(struct device *dev) { ktime_t calltime = ktime_set(0, 0); - if (initcall_debug) { + if (pm_print_times) { pr_info("calling %s+ @ %i, parent: %s\n", dev_name(dev), task_pid_nr(current), dev->parent ? dev_name(dev->parent) : "none"); @@ -181,7 +181,7 @@ static void initcall_debug_report(struct device *dev, ktime_t calltime, { ktime_t delta, rettime; - if (initcall_debug) { + if (pm_print_times) { rettime = ktime_get(); delta = ktime_sub(rettime, calltime); pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev), diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index eeb4bff9505c..12c77b7ff8e8 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -85,3 +85,14 @@ static inline int pm_qos_sysfs_add(struct device *dev) { return 0; } static inline void pm_qos_sysfs_remove(struct device *dev) {} #endif + +#ifdef CONFIG_PM_DEBUG + +extern int pm_print_times_enabled; +#define pm_print_times (initcall_debug || pm_print_times_enabled) + +#else /* CONFIG_PM_DEBUG */ + +#define pm_print_times initcall_debug + +#endif /* CONFIG_PM_DEBUG */ diff --git a/kernel/power/main.c b/kernel/power/main.c index 428f8a034e96..7beb3fb3670b 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -132,6 +132,38 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr, } power_attr(pm_test); + +/* + * pm_print_times: print time taken by devices to suspend and resume. + * + * show() returns whether printing of suspend and resume times is enabled. + * store() accepts 0 or 1. 0 disables printing and 1 enables it. + */ +int pm_print_times_enabled; + +static ssize_t pm_print_times_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", pm_print_times_enabled); +} + +static ssize_t pm_print_times_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + if (val > 1) + return -EINVAL; + + pm_print_times_enabled = val; + return n; +} + +power_attr(pm_print_times); #endif /* CONFIG_PM_DEBUG */ #ifdef CONFIG_DEBUG_FS @@ -530,6 +562,7 @@ static struct attribute * g[] = { #endif #ifdef CONFIG_PM_DEBUG &pm_test_attr.attr, + &pm_print_times_attr.attr, #endif #endif NULL, -- cgit v1.2.3 From b2df1d4f8b95d9d1e3f064cef02fc5c5116b05cf Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 21 Jun 2012 00:19:33 +0200 Subject: PM / Sleep: Separate printing suspend times from initcall_debug Change the behavior of the newly introduced /sys/power/pm_print_times attribute so that its initial value depends on initcall_debug, but setting it to 0 will cause device suspend/resume times not to be printed, even if initcall_debug has been set. This way, the people who use initcall_debug for reasons other than PM debugging will be able to switch the suspend/resume times printing off, if need be. Signed-off-by: Rafael J. Wysocki Reviewed-by: Srivatsa S. Bhat Acked-by: Greg Kroah-Hartman --- drivers/base/power/main.c | 4 +-- drivers/base/power/power.h | 11 ------- include/linux/suspend.h | 6 ++++ kernel/power/Kconfig | 4 +-- kernel/power/main.c | 76 +++++++++++++++++++++++++++------------------- 5 files changed, 54 insertions(+), 47 deletions(-) (limited to 'kernel/power') diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 6e4db96958d1..df5f41d2ec95 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -166,7 +166,7 @@ static ktime_t initcall_debug_start(struct device *dev) { ktime_t calltime = ktime_set(0, 0); - if (pm_print_times) { + if (pm_print_times_enabled) { pr_info("calling %s+ @ %i, parent: %s\n", dev_name(dev), task_pid_nr(current), dev->parent ? dev_name(dev->parent) : "none"); @@ -181,7 +181,7 @@ static void initcall_debug_report(struct device *dev, ktime_t calltime, { ktime_t delta, rettime; - if (pm_print_times) { + if (pm_print_times_enabled) { rettime = ktime_get(); delta = ktime_sub(rettime, calltime); pr_info("call %s+ returned %d after %Ld usecs\n", dev_name(dev), diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 12c77b7ff8e8..eeb4bff9505c 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -85,14 +85,3 @@ static inline int pm_qos_sysfs_add(struct device *dev) { return 0; } static inline void pm_qos_sysfs_remove(struct device *dev) {} #endif - -#ifdef CONFIG_PM_DEBUG - -extern int pm_print_times_enabled; -#define pm_print_times (initcall_debug || pm_print_times_enabled) - -#else /* CONFIG_PM_DEBUG */ - -#define pm_print_times initcall_debug - -#endif /* CONFIG_PM_DEBUG */ diff --git a/include/linux/suspend.h b/include/linux/suspend.h index cd83059fb592..0c808d7fa579 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -408,6 +408,12 @@ static inline void unlock_system_sleep(void) {} #endif /* !CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM_SLEEP_DEBUG +extern bool pm_print_times_enabled; +#else +#define pm_print_times_enabled (false) +#endif + #ifdef CONFIG_PM_AUTOSLEEP /* kernel/power/autosleep.c */ diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 8f9b4eb974e0..a70518c9d82f 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -175,7 +175,7 @@ config PM_TEST_SUSPEND You probably want to have your system's RTC driver statically linked, ensuring that it's available when this test runs. -config CAN_PM_TRACE +config PM_SLEEP_DEBUG def_bool y depends on PM_DEBUG && PM_SLEEP @@ -196,7 +196,7 @@ config PM_TRACE config PM_TRACE_RTC bool "Suspend/resume event tracing" - depends on CAN_PM_TRACE + depends on PM_SLEEP_DEBUG depends on X86 select PM_TRACE ---help--- diff --git a/kernel/power/main.c b/kernel/power/main.c index 7beb3fb3670b..f458238109cc 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -132,38 +132,6 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr, } power_attr(pm_test); - -/* - * pm_print_times: print time taken by devices to suspend and resume. - * - * show() returns whether printing of suspend and resume times is enabled. - * store() accepts 0 or 1. 0 disables printing and 1 enables it. - */ -int pm_print_times_enabled; - -static ssize_t pm_print_times_show(struct kobject *kobj, - struct kobj_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", pm_print_times_enabled); -} - -static ssize_t pm_print_times_store(struct kobject *kobj, - struct kobj_attribute *attr, - const char *buf, size_t n) -{ - unsigned long val; - - if (kstrtoul(buf, 10, &val)) - return -EINVAL; - - if (val > 1) - return -EINVAL; - - pm_print_times_enabled = val; - return n; -} - -power_attr(pm_print_times); #endif /* CONFIG_PM_DEBUG */ #ifdef CONFIG_DEBUG_FS @@ -267,6 +235,47 @@ late_initcall(pm_debugfs_init); #endif /* CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM_SLEEP_DEBUG +/* + * pm_print_times: print time taken by devices to suspend and resume. + * + * show() returns whether printing of suspend and resume times is enabled. + * store() accepts 0 or 1. 0 disables printing and 1 enables it. + */ +bool pm_print_times_enabled; + +static ssize_t pm_print_times_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", pm_print_times_enabled); +} + +static ssize_t pm_print_times_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + if (val > 1) + return -EINVAL; + + pm_print_times_enabled = !!val; + return n; +} + +power_attr(pm_print_times); + +static inline void pm_print_times_init(void) +{ + pm_print_times_enabled = !!initcall_debug; +} +#else /* !CONFIG_PP_SLEEP_DEBUG */ +static inline void pm_print_times_init(void) {} +#endif /* CONFIG_PM_SLEEP_DEBUG */ + struct kobject *power_kobj; /** @@ -562,6 +571,8 @@ static struct attribute * g[] = { #endif #ifdef CONFIG_PM_DEBUG &pm_test_attr.attr, +#endif +#ifdef CONFIG_PM_SLEEP_DEBUG &pm_print_times_attr.attr, #endif #endif @@ -599,6 +610,7 @@ static int __init pm_init(void) error = sysfs_create_group(power_kobj, &attr_group); if (error) return error; + pm_print_times_init(); return pm_autosleep_init(); } -- cgit v1.2.3 From d8150d350408de6fb2b9ee7b7625ae8e2bb7aa4a Mon Sep 17 00:00:00 2001 From: Bojan Smojver Date: Thu, 21 Jun 2012 22:27:24 +0200 Subject: PM / Hibernate: Print hibernation/thaw progress indicator one line at a time. With the introduction of suspend to both into in-kernel hibernation code, dmesg was getting polluted with backspace characters printed as part of image saving progress indicator. This patch introduces printing of progress indicator on image save/load every 10% and one line at a time. As an additional benefit, all other messages emitted by the kernel during hibernation/thaw should now print cleanly as well. Signed-off-by: Bojan Smojver Signed-off-by: Rafael J. Wysocki --- kernel/power/swap.c | 54 ++++++++++++++++++++++++++--------------------------- 1 file changed, 27 insertions(+), 27 deletions(-) (limited to 'kernel/power') diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 83d505142b00..3c9d764eb0d8 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -448,9 +448,9 @@ static int save_image(struct swap_map_handle *handle, struct timeval start; struct timeval stop; - printk(KERN_INFO "PM: Saving image data pages (%u pages) ... ", + printk(KERN_INFO "PM: Saving image data pages (%u pages)...\n", nr_to_write); - m = nr_to_write / 100; + m = nr_to_write / 10; if (!m) m = 1; nr_pages = 0; @@ -464,7 +464,8 @@ static int save_image(struct swap_map_handle *handle, if (ret) break; if (!(nr_pages % m)) - printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m); + printk(KERN_INFO "PM: Image saving progress: %3d%%\n", + nr_pages / m * 10); nr_pages++; } err2 = hib_wait_on_bio_chain(&bio); @@ -472,9 +473,7 @@ static int save_image(struct swap_map_handle *handle, if (!ret) ret = err2; if (!ret) - printk(KERN_CONT "\b\b\b\bdone\n"); - else - printk(KERN_CONT "\n"); + printk(KERN_INFO "PM: Image saving done.\n"); swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); return ret; } @@ -668,9 +667,9 @@ static int save_image_lzo(struct swap_map_handle *handle, printk(KERN_INFO "PM: Using %u thread(s) for compression.\n" - "PM: Compressing and saving image data (%u pages) ... ", + "PM: Compressing and saving image data (%u pages)...\n", nr_threads, nr_to_write); - m = nr_to_write / 100; + m = nr_to_write / 10; if (!m) m = 1; nr_pages = 0; @@ -690,8 +689,10 @@ static int save_image_lzo(struct swap_map_handle *handle, data_of(*snapshot), PAGE_SIZE); if (!(nr_pages % m)) - printk(KERN_CONT "\b\b\b\b%3d%%", - nr_pages / m); + printk(KERN_INFO + "PM: Image saving progress: " + "%3d%%\n", + nr_pages / m * 10); nr_pages++; } if (!off) @@ -761,11 +762,8 @@ out_finish: do_gettimeofday(&stop); if (!ret) ret = err2; - if (!ret) { - printk(KERN_CONT "\b\b\b\bdone\n"); - } else { - printk(KERN_CONT "\n"); - } + if (!ret) + printk(KERN_INFO "PM: Image saving done.\n"); swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); out_clean: if (crc) { @@ -973,9 +971,9 @@ static int load_image(struct swap_map_handle *handle, int err2; unsigned nr_pages; - printk(KERN_INFO "PM: Loading image data pages (%u pages) ... ", + printk(KERN_INFO "PM: Loading image data pages (%u pages)...\n", nr_to_read); - m = nr_to_read / 100; + m = nr_to_read / 10; if (!m) m = 1; nr_pages = 0; @@ -993,7 +991,8 @@ static int load_image(struct swap_map_handle *handle, if (ret) break; if (!(nr_pages % m)) - printk("\b\b\b\b%3d%%", nr_pages / m); + printk(KERN_INFO "PM: Image loading progress: %3d%%\n", + nr_pages / m * 10); nr_pages++; } err2 = hib_wait_on_bio_chain(&bio); @@ -1001,12 +1000,11 @@ static int load_image(struct swap_map_handle *handle, if (!ret) ret = err2; if (!ret) { - printk("\b\b\b\bdone\n"); + printk(KERN_INFO "PM: Image loading done.\n"); snapshot_write_finalize(snapshot); if (!snapshot_image_loaded(snapshot)) ret = -ENODATA; - } else - printk("\n"); + } swsusp_show_speed(&start, &stop, nr_to_read, "Read"); return ret; } @@ -1185,9 +1183,9 @@ static int load_image_lzo(struct swap_map_handle *handle, printk(KERN_INFO "PM: Using %u thread(s) for decompression.\n" - "PM: Loading and decompressing image data (%u pages) ... ", + "PM: Loading and decompressing image data (%u pages)...\n", nr_threads, nr_to_read); - m = nr_to_read / 100; + m = nr_to_read / 10; if (!m) m = 1; nr_pages = 0; @@ -1319,7 +1317,10 @@ static int load_image_lzo(struct swap_map_handle *handle, data[thr].unc + off, PAGE_SIZE); if (!(nr_pages % m)) - printk("\b\b\b\b%3d%%", nr_pages / m); + printk(KERN_INFO + "PM: Image loading progress: " + "%3d%%\n", + nr_pages / m * 10); nr_pages++; ret = snapshot_write_next(snapshot); @@ -1344,7 +1345,7 @@ out_finish: } do_gettimeofday(&stop); if (!ret) { - printk("\b\b\b\bdone\n"); + printk(KERN_INFO "PM: Image loading done.\n"); snapshot_write_finalize(snapshot); if (!snapshot_image_loaded(snapshot)) ret = -ENODATA; @@ -1357,8 +1358,7 @@ out_finish: } } } - } else - printk("\n"); + } swsusp_show_speed(&start, &stop, nr_to_read, "Read"); out_clean: for (i = 0; i < ring_size; i++) -- cgit v1.2.3 From 11388c87d2abca1f01975ced28ce9eacea239104 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 19 Jul 2012 00:00:58 +0200 Subject: PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock Require processes wanting to use the wake_lock/wake_unlock sysfs files to have the CAP_BLOCK_SUSPEND capability, which also is required for the eventpoll EPOLLWAKEUP flag to be effective, so that all interfaces related to blocking autosleep depend on the same capability. Signed-off-by: Rafael J. Wysocki Cc: stable@vger.kernel.org Acked-by: Michael Kerrisk --- kernel/power/wakelock.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'kernel/power') diff --git a/kernel/power/wakelock.c b/kernel/power/wakelock.c index c8fba3380076..8f50de394d22 100644 --- a/kernel/power/wakelock.c +++ b/kernel/power/wakelock.c @@ -9,6 +9,7 @@ * manipulate wakelocks on Android. */ +#include #include #include #include @@ -188,6 +189,9 @@ int pm_wake_lock(const char *buf) size_t len; int ret = 0; + if (!capable(CAP_BLOCK_SUSPEND)) + return -EPERM; + while (*str && !isspace(*str)) str++; @@ -231,6 +235,9 @@ int pm_wake_unlock(const char *buf) size_t len; int ret = 0; + if (!capable(CAP_BLOCK_SUSPEND)) + return -EPERM; + len = strlen(buf); if (!len) return -EINVAL; -- cgit v1.2.3