summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12net: eth: 8390: remove section warning in etherh.cOlof Johansson1-1/+1
Commit c45f812f0280 ('8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature') ended up moving the printout of version[] from something that will be compiled out due to defines, to something that is now evaluated at runtime. That means that what always used to be an access to an __initdata string from non-__init code started showing up as a section mismatch when it didn't before. All other 8390 versions skip __initdata on the version string, and starting to annotate the whole chain of callers with __init seems like more churn than it's worth on this driver, so remove it from etherh.c as well. Fixes: c45f812f0280 ('8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature') Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12macvlan: Remove custom recieve and forward handlersVlad Yasevich2-14/+6
Since now macvlan and macvtap use the same receive and forward handlers, we can remove them completely and use netif_rx and dev_forward_skb() directly. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12macvtap: Add support of packet capture on macvtap device.Vlad Yasevich1-27/+32
Macvtap device currently doesn not allow a user to capture traffic on due to the fact that it steals the packets from the network stack before the skb->dev is set correctly on the receive side, and that use uses macvlan transmit path directly on the send side. As a result, we never get a change to give traffic to the taps while the correct device is set in the skb. This patch makes macvtap device behave almost exaclty like macvlan. On the send side, we switch to using dev_queue_xmit(). On the receive side, to deliver packets to macvtap, we now use netif_rx and dev_forward_skb just like macvlan. The only differnce now is that macvtap has its own rx_handler which is attached to the macvtap netdev. It is here that we now steal the packet and provide it to the socket. As a result, we can now capture traffic on the macvtap device: tcpdump -i macvtap0 It also gives us the abilit to add tc actions to the macvtap device and actually utilize different bandwidth management queues on output. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: eth: cpsw: 64-bit phys_addr_t and sparse cleanupOlof Johansson1-4/+4
Minor fix for printk format of a phys_addr_t, and the switch of two local functions to static since they're not used outside of the file. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: eth: davinci_cpdma: Mark a local variable staticOlof Johansson1-1/+1
Only used locally. Found by sparse. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: eth: davinci_cpdma: 64-bit phys/dma_addr_t cleanupOlof Johansson1-3/+2
Silences the below warnings when building with ARM_LPAE enabled, which gives longer dma_addr_t by default: drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_desc_pool_create': drivers/net/ethernet/ti/davinci_cpdma.c:182:3: warning: passing argument 3 of 'dma_alloc_attrs' from incompatible pointer type [enabled by default] drivers/net/ethernet/ti/davinci_cpdma.c: In function 'desc_phys': drivers/net/ethernet/ti/davinci_cpdma.c:222:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/net/ethernet/ti/davinci_cpdma.c:223:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-118390 : Replace ei_debug with msg_enable/NETIF_MSG_* featureMatthew Whitehead16-302/+426
Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to the private struct ei_device. Now each 8390 ethernet instance has a per-device logging variable. Changed older style printk() calls to more canonical forms. Tested on: ne, ne2k-pci, smc-ultra, and wd hardware. V4.0 - Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG V3.0 - Checked for cases where pr_cont() was most appropriate choice. - Changed module parameter from 'debug' to 'msg_enable' because debug was no longer the best description. V2.0 - Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw) to netif_(dbg|info|warn|err) where possible. Signed-off-by: Matthew Whitehead <tedheadster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11ipv4: fix wildcard search with inet_confirm_addr()Nicolas Dichtel1-2/+2
Help of this function says: "in_dev: only on this interface, 0=any interface", but since commit 39a6d0630012 ("[NETNS]: Process inet_confirm_addr in the correct namespace."), the code supposes that it will never be NULL. This function is never called with in_dev == NULL, but it's exported and may be used by an external module. Because this patch restore the ability to call inet_confirm_addr() with in_dev == NULL, I partially revert the above commit, as suggested by Julian. CC: Julian Anastasov <ja@ssi.bg> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11vxlan: leave multicast group when vxlan device downGao feng1-6/+21
vxlan_group_used only allows device to leave multicast group when the remote_ip of this vxlan device is difference from other vxlan devices' remote_ip. this will cause device not leave multicast group untile the vn_sock of this vxlan deivce being released. The check in vxlan_group_used is not quite precise. since even the remote_ip is same, but these vxlan devices may use different lower devices, and they may use different vn_socks. Only when some vxlan devices use the same vn_sock,same lower device and same remote_ip, the mc_list of the vn_sock should not be changed. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11vxlan: remove vxlan_group_used in vxlan_openGao feng1-3/+1
In vxlan_open, vxlan_group_used always returns true, because the state of the vxlan deivces which we want to open has alreay been running. and it has already in vxlan_list. Since ip_mc_join_group takes care of the reference of struct ip_mc_list. removing vxlan_group_used here is safe. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11bgmac: replace some magic values with definesRafał Miłecki2-9/+18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11bgmac: reset cached MAC state during chip resetRafał Miłecki1-0/+2
Without this bgmac_adjust_link didn't know it should re-initialize MAC state. This led to the MAC not working after if down & up routine. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Fix build warningSoren Brinkmann1-1/+1
When adjusting the link speed, the target frequency is determined by a 'swith (LINK_SPEED)' statement, that assigns the target rate only for valid and expected LINK_SPEED values. This incomplete switch statement leads to the following build warning: drivers/net/ethernet/cadence/macb.c: In function 'macb_handle_link_change': >> drivers/net/ethernet/cadence/macb.c:241:14: warning: 'rate' may be used uninitialized in this function [-Wmaybe-uninitialized] netdev_warn(dev, "unable to generate target frequency: %ld Hz\n", ^ drivers/net/ethernet/cadence/macb.c:215:13: note: 'rate' was declared here long ferr, rate, rate_rounded; Fixing this by bailing out of that function in the switch's default case before the rate variable is used. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: macb: Adjust tx_clk when link speed changesSoren Brinkmann2-0/+65
Adjust the ethernet clock according to the negotiated link speed. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: macb: Use devm_request_irq()Soren Brinkmann1-5/+3
Use the device managed interface to request the IRQ, simplifying error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: macb: Use devm_ioremap()Soren Brinkmann1-5/+3
Use the device managed version of ioremap to remap IO memory, simplifying error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: macb: Migrate to devm clock interfaceSoren Brinkmann1-12/+20
Migrate to using the device managed interface for clocks and clean up the associated error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: macb: Migrate to dev_pm_opsSoren Brinkmann1-7/+7
Migrate the suspend/resume functions to use the dev_pm_ops PM interface. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10atm: solos-pci: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10atm: he: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: ieee802154: remove unnecessary spi_set_drvdata()Jingoo Han2-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: phy: spi_ks8995: remove unnecessary spi_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: vmxnet3: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: fddi: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: hippi: remove unnecessary pci_set_drvdata()Jingoo Han1-4/+1
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10virtio_net: spelling fixesstephen hemminger1-2/+2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10virtio_net: remove unused parameter to send_commandstephen hemminger1-21/+13
All the code passes NULL for the last sg list (in). Simplify by just removing it. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10Revert "macvtap: remove useless codes in macvtap_aio_read() and ↵David S. Miller1-0/+5
macvtap_recvmsg()" This reverts commit 41e4af69a5984a3193ba3108fb4e067b0e34dc73. MSG_TRUNC handling was broken and is going to be fixed in the 'net' tree, so revert this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10Revert "tun: remove useless codes in tun_chr_aio_read() and tun_recvmsg()"David S. Miller1-0/+5
This reverts commit 73713357ab58aacda1af715bb5a623528dbbfd79. MSG_TRUNC handling was broken and is going to be fixed in the 'net' tree, so revert this. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10sh_eth: add R8A7791 supportSergei Shtylyov2-4/+5
Add support for yet another ARM member of the R-Car family, R-Car M2, also known as R8A7791 -- it will share the code and data with previously added R8A7790. Despite the Ether devices in these SoCs are indistinguishable at least from the driver's point of view, we do introduce a new platform device ID "r8a7791-ether" unlike the wildcard ID used for R8A7778/9 SoCs, due to newly established policy for the Renesas SoCs. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10Merge branch 'master' of ↵David S. Miller16-136/+453
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e, igb, ixgbe and ixgbevf. Shannon provides a couple of i40e patches, first restricts the ethtool diag test messages by using netif_info() macro to when the hardware bit is enabled in the message level netdev message mask. Second provides a fix for when there is an out-of-range descriptor request. Kamil provides a fix for i40e by updating the loopback enum types and add information about the current loopback mode to data returned from get_link_info(). Jesse provides a fix for i40e define name that was being mis-used. I40E_ITR_NONE was being used as an ITRN register index by accident because it was easily associated with the i40e Rx ITR and friends defines, when it should be associated with the DYN_CTL register sets. Jacob provides an update for ixgbevf Kconfig description since the VF driver supports more than just the 82599 device. Don and Alex provide a cleanup patch for ixgbe to make it where head, tail, next to clean and next to use are all reset in a single function for both Tx and Rx path. Before, the code for this was spread out over several areas which made it difficult to track what the values were for each of the values. Carolyn provides two igb patches to add a media switching feature for i354 PHY's and new Media Auto Sense for 82580 devices only. Aaron Sierra provides a fix for igb to resolve an issue with the 64-bit PCI addresses being truncated because the return values of pci_resource_start() and pci_resouce_end() were being cast to unsigned long. Guenter Roeck provides two igb patches, first simplifies the code by attaching the hwmon sysfs attributes to hwmon device instead of the PCI device. Second fixes the temperature sensor attribute index by setting it to 1 instead of 0 (per hwmon ABI). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10bgmac: start/stop PHY on netdev open/stopRafał Miłecki1-0/+4
I've realized that I need to call ethtool command to get Ethernet working after booting. Ex call: ethtool -s eth0 autoneg on It was fixing Ethernet even if auto-negotiation was already on. Adding calls to phy_start and phy_stop look like a real solution. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10igb: Start temperature sensor attribute index with 1Guenter Roeck1-4/+4
Per hwmon ABI, temperature sensor attribute index starts with 1, not 0. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10igb: Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck2-55/+53
Simplify the code. Attach hwmon sysfs attributes to hwmon device instead of pci device. Avoid race conditions caused by attributes being created after registration and provide mandatory 'name' attribute by using new hwmon API. Other cleanup: Instead of allocating memory for hwmon attributes, move attributes and all other hwmon related data into struct hwmon_buff and allocate the entire structure using devm_kzalloc. Check return value from calls to igb_add_hwmon_attr() one by one instead of logically combining them all together. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10igb: Add new feature Media Auto Sense for 82580 devices onlyCarolyn Wyborny6-0/+226
This patch adds support for the hardware feature Media Auto Sense. This feature requires a custom EEPROM image provided by our customer support team. The feature allows hardware designed with dual PHY's, fiber and copper to be used with either media without additional EEPROM changes. Fiber is preferred and driver will swap and configure for fiber media if sensed by the device at any time. Device will swap back to copper if it is the only media detected. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10igb: Support ports mapped in 64-bit PCI spaceAaron Sierra1-7/+3
This patch resolves an issue with 64-bit PCI addresses being truncated because the return values of pci_resource_start() and pci_resource_end() were being cast to unsigned long. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10igb: Add media switching feature for i354 PHY'sCarolyn Wyborny5-0/+96
This patch adds a new feature which is supported in some PHY's on some i354 devices. This feature is Auto Media Detect and allows which ever media is detected first by the PHY to be the media used and configured by the device. This is a media swapping feature that is wholly contained in the Marvell PHY. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10ixgbe: Focus config of head, tail ntc, and ntu all into a single functionDon Skidmore2-40/+19
This patch makes it so that head, tail, next to clean, and next to use are all reset in a single function for the Tx or Rx path. Previously the code for this was spread out over several areas which could make it difficult to track what the values for these were. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10ixgbevf: update Kconfig descriptionJacob Keller1-4/+4
This patch updates the ixgbevf Kconfig description, as the VF driver supports more than just the 82599 device. This patch renames the config menu item, as well as updates the help description to make it more obvious that the driver supports more than just a single device group. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10i40e: Bump version numberCatherine Sullivan1-1/+1
Version updated to 0.3.13-k Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10i40e: remove and fix confusing define nameJesse Brandeburg1-4/+17
I40E_ITR_NONE was being used as an ITRN register index by accident because it was easily associated with the I40E_RX_ITR and friends defines. Change the name slightly in order to make it clear that I40E_ITR_NONE is really associated with the DYN_CTL register sets. Change-Id: I04702c027c7495b90a8bf2db85d3e085a2c7d02a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10i40e: complain about out-of-range descriptor requestShannon Nelson1-9/+13
Instead of silently clamping the descriptor change request into the proper range, fail the request and complain in the log file. Change-Id: Id55ef59255d93c04bedffa8e25fe7ea796c90f32 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10i40e: loopback info and set loopback fixKamil Krawczyk3-4/+6
Add information about current loopback mode to data returned from get_link_info function. Minor fix in set_loopback function and update in loopback types enum. Change-Id: I9d1c540a84ab18eef5ea6429be6331f33fc06aca Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-10i40e: restrict diag test messagesShannon Nelson1-9/+12
Use the netif_info() macro to restrict messaging to when the HW bit is enabled in the msglvl netdev message mask. Change-Id: I83030d4402991cfb7da100da00f05ce502ada4ae Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-09mlx4_core: Roll back round robin bitmap allocation commit for CQs, SRQs, and ↵Jack Morgenstein10-20/+32
MPTs Commit f4ec9e9 "mlx4_core: Change bitmap allocator to work in round-robin fashion" introduced round-robin allocation (via bitmap) for all resources which allocate via a bitmap. Round robin allocation is desirable for mcgs, counters, pd's, UARs, and xrcds. These are simply numbers, with no involvement of ICM memory mapping. Round robin is required for QPs, since we had a problem with immediate reuse of a 24-bit QP number (commit f4ec9e9). However, for other resources which use the bitmap allocator and involve mapping ICM memory -- MPTs, CQs, SRQs -- round-robin is not desirable. What happens in these cases is the following: ICM memory is allocated and mapped in chunks of 256K. Since the resource allocation index goes up monotonically, the allocator will eventually require mapping a new chunk. Now, chunks are also unmapped when their reference count goes back to zero. Thus, if a single app is running and starts/exits frequently we will have the following situation: When the app starts, a new chunk must be allocated and mapped. When the app exits, the chunk reference count goes back to zero, and the chunk is unmapped and freed. Therefore, the app must pay the cost of allocation and mapping of ICM memory each time it runs (although the price is paid only when allocating the initial entry in the new chunk). For apps which allocate MPTs/SRQs/CQs and which operate as described above, this presented a performance problem. We therefore roll back the round-robin allocator modification for MPTs, CQs, SRQs. Reported-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09bgmac: connect to PHY and make use of PHY deviceRafał Miłecki2-138/+64
We were already registering MDIO bus, but we were not connecting bgmac to the PHY. Add proper call and implement adjust link function to switch MAC into requested state. At the same time it's possible to drop our internal PHY management. This is a "standard" PHY, so the "Generic PHY" driver works perfectly fine with this. Don't duplicate the code. Finally make use of phy_ethtool_[gs]set functions instead implementing them from scratch. This change was successfully tested on BCM5357. I was able to autonegotiate 1000Mb/s full duplex, as well as force any of the 10/100/1000 half/full modes. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: sh_eth: do not issue a wild PHY reset through BMCRFlorian Fainelli1-1/+4
The sh_eth driver issues an uncontrolled PHY reset through the MII register BMCR but fails to wait for the reset to complete, and will also implicitely wipe out all possible PHY fixups applied. Use phy_init_hw() which remedies both problems. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: tc35815: use phy_init_hw for PHY resetFlorian Fainelli1-11/+4
Instead of open-coding the PHY reset through MII BMCR, use phy_init_hw() which does that for us and also makes sure that any PHY specific fixups are applied. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: pxa168_eth: use phy_init_hw for PHY resetFlorian Fainelli1-19/+1
Instead of open-coding a PHY reset through the MII BMCR register, use phy_init_hw() which does this for us and ensures that PHY device fixups are also applied. We also remove a call to ethernet_phy_reset() which is now unncessary since phy_attach() calls phy_attach_direct() which in turns calls phy_init_hw(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: mv643xx_eth: use phy_init_hw to reset PHYFlorian Fainelli1-20/+1
Instead of open-coding a PHY reset through the MII BMCR register, use phy_init_hw() which does that for us and will also make sure that PHY fixups are applied if required. We also remove a call to phy_reset() due to the following sequence of calls in the driver: phy_scan() -> phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() and we only have a call to phy_init() after phy_scan(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 10:30:50 +0000