summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-06-07USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurableAlan Stern1-4/+1
This patch (as1468) changes the Kconfig definition for USB_GADGET_DUALSPEED. This option is determined entirely by which device controller drivers are to be built, through Select statements; it does not need to be (and should not be) configurable by the user. Also, the "default n" line is superfluous -- everything defaults to N. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07USB: dummy-hcd needs the has_tt flagAlan Stern1-0/+1
Like with other host controllers capable of operating at both high speed and full speed, we need to indicate that the emulated controller presented by dummy-hcd has this ability. Otherwise usbcore will not accept full-speed gadgets under dummy-hcd. This patch (as1469) sets the appropriate has_tt flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb-storage: redo incorrect readsAlan Stern4-1/+62
Some USB mass-storage devices have bugs that cause them not to handle the first READ(10) command they receive correctly. The Corsair Padlock v2 returns completely bogus data for its first read (possibly it returns the data in encrypted form even though the device is supposed to be unlocked). The Feiya SD/SDHC card reader fails to complete the first READ(10) command after it is plugged in or after a new card is inserted, returning a status code that indicates it thinks the command was invalid, which prevents the kernel from retrying the read. Since the first read of a new device or a new medium is for the partition sector, the kernel is unable to retrieve the device's partition table. Users have to manually issue an "hdparm -z" or "blockdev --rereadpt" command before they can access the device. This patch (as1470) works around the problem. It adds a new quirk flag, US_FL_INVALID_READ10, indicating that the first READ(10) should always be retried immediately, as should any failing READ(10) commands (provided the preceding READ(10) command succeeded, to avoid getting stuck in a loop). The patch also adds appropriate unusual_devs entries containing the new flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Sven Geggus <sven-usbst@geggus.net> Tested-by: Paul Hartman <paul.hartman+linux@gmail.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07Merge remote branch 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next ↵Dave Airlie7-59/+74
into drm-fixes * 'nouveau/drm-nouveau-fixes' of /ssd/git/drm-nouveau-next: drm/nv40: fall back to paged dma object for the moment drm/nouveau: fix leak of gart mm node drm/nouveau: fix vram page mapping when crossing page table boundaries drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901). drm/nouveau: don't create accel engine objects when noaccel=1 drm/nvc0: recognise 0xdX chipsets as NV_C0
2011-06-07Merge remote branch 'keithp/drm-intel-fixes' of /ssd/git/drm-next into drm-fixesDave Airlie12-128/+87
* 'keithp/drm-intel-fixes' of /ssd/git/drm-next: drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007 drm/i915: Share the common force-audio property between connectors drm/i915: Remove unused enum "chip_family" drm/915: fix relaxed tiling on gen2: tile height drm/i915/crt: Explicitly return false if connected to a digital monitor drm/i915: Replace ironlake_compute_wm0 with g4x_compute_wm0 drm/i915: Only print out the actual number of fences for i915_error_state drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/ drm: i915: correct return status in intel_hdmi_mode_valid() drm/i915: fix regression after clock gating init split drm/i915: fix if statement in ivybridge irq handler
2011-06-06usb/renesas_usbhs: free uep on removalSebastian Andrzej Siewior1-0/+1
Can't find evidence that this is actually done. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06usb/s3c-hsudc: fix error pathSebastian Andrzej Siewior1-2/+4
I doubt the clock is optional. In case it is it should not return with an error code because we leak everything. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06usb/pxa25x_udc: cleanup the LUBBOCK err pathSebastian Andrzej Siewior1-3/+2
this is more backwords than it has to be. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06usb/mv_udc_core: fix compileSebastian Andrzej Siewior1-4/+4
|drivers/usb/gadget/mv_udc_core.c:2108: error: label `error' used but not defined This seems to be broken since the initial commit. I changed this to a simple return. The other user is the probe code which lets ->probe() fail on error here. |drivers/usb/gadget/mv_udc_core.c:2107: warning: passing argument 1 of `dev_err' from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2118: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2119: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2130: error: initializer element is not constant |drivers/usb/gadget/mv_udc_core.c:2130: error: (near initialization for `udc_driver.driver.pm') Cc: Chao Xie <chao.xie@marvell.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06usb: gadget: include <linux/prefetch.h> to fix compiling errorBryan Wu5-0/+5
drivers/usb/gadget/at91_udc.c: In function 'write_fifo': drivers/usb/gadget/at91_udc.c:421:2: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/gadget/at91_udc.o] Error 1 make[2]: *** [drivers/usb/gadget] Error 2 make[2]: *** Waiting for unfinished jobs.... Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06USB: s3c-hsotg: Tone down debuggingMark Brown1-10/+12
Currently the s3c-hsotg driver is extremely chatty, producing voluminous with large register dumps even in default operation. Tone this down so we're not chatty unless DEBUG is defined. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06usb: remove bad dput after dentry_unhashSage Weil1-1/+0
Commit 64252c75a (vfs: remove dget() from dentry_unhash()) removed the useless dget from dentry_unhash but didn't fix up this caller in the usb code. There used to be exactly one dput per dentry_unhash call; now there are none. Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07drm/nv40: fall back to paged dma object for the momentBen Skeggs2-2/+2
PCI(E)GART isn't quite stable it seems, fall back to old method until I get the time to sort it out properly. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nouveau: fix leak of gart mm nodeBen Skeggs1-0/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nouveau: fix vram page mapping when crossing page table boundariesBen Skeggs1-0/+1
Hopefully the cause of nvc0 "page jumping" issue. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nv17-nv40: Fix modesetting failure when pitch == 4096px (fdo bug 35901).Francisco Jerez3-1/+11
Reported-by: Mario Bachmann <grafgrimm77@gmx.de> Tested-by: Greg Turner <gmturner007@ameritech.net> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nouveau: don't create accel engine objects when noaccel=1Ben Skeggs1-56/+56
Fixes various potential oopses. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-07drm/nvc0: recognise 0xdX chipsets as NV_C0Ben Skeggs1-0/+2
Should hopefully get modesetting at least from this, it appears these are GF119 chipsets. Accel will come eventually, once I order a board. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-06-06GPIO: OMAP: add locking around calls to _set_gpio_triggeringColin Cross1-0/+9
_set_gpio_triggering uses read-modify-write on bank registers, lock bank->lock around all calls to it to prevent register corruption if two cpus access gpios in the same bank at the same time. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-06GPIO: OMAP: fix setting IRQWAKEN bits for OMAP4Colin Cross1-10/+2
Setting the IRQWAKEN bit was overwriting previous IRQWAKEN bits, causing only the last bit set to take effect, resulting in lost wakeups when the GPIO controller is in idle. Replace direct writes to IRQWAKEN with MOD_REG_BIT calls to perform a read-modify-write on the register. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-06GPIO: OMAP: fix section mismatch warningsRussell King1-1/+1
WARNING: arch/arm/plat-omap/built-in.o(.devinit.text+0x46c): Section mismatch in reference from the function omap_gpio_probe() to the function .init.text:omap_gpio_chip_init() The function __devinit omap_gpio_probe() references a function __init omap_gpio_chip_init(). If omap_gpio_chip_init is only used by omap_gpio_probe then annotate omap_gpio_chip_init with a matching annotation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-06USB: core: Tolerate protocol stall during hub and port status readLibor Pechacek1-2/+4
Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06musb: fix prefetch build failureMike Frysinger1-0/+1
After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/musb_core.c: In function 'musb_write_fifo': drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/musb/musb_core.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7Toby Gray1-0/+2
This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing the secondary ACM channel on the device to be exposed. Without this patch the ACM driver won't claim this secondary channel as it's marked as having a vendor-specific protocol. Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06usb-gadget: unlock data->lock mutex on error path in ep_write()Alexey Khoroshilov1-1/+3
ep_write() acquires data->lock mutex in get_ready_ep() and releases it on all paths except for one: when usb_endpoint_xfer_isoc() failed. The patch adds mutex_unlock(&data->lock) at that path. It is similar to commit 00cc7a5 ("usb-gadget: unlock data->lock mutex on error path in ep_read()"), it was not fixed at that time by accident. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06USB: option Add blacklist for ZTE K3765-Z (19d2:2002)Torsten Hilbrich1-1/+9
The funtion option_send_status times out when sending USB messages to the interfaces 0, 1, and 2 of this UMTS stick. This results in a 5s timeout in the function causing other tty operations to feel very sluggish. This patch adds a blacklist entry for these 3 interfaces on the ZTE K3765-Z device. I was also able to reproduce the problem with v2.6.38 and v2.6.39. This is very similar to a problem fixed in commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2 Author: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Date: Wed Mar 9 09:19:48 2011 +0000 USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626 Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06option: add Prolink PH300 modem IDsDan Williams1-0/+2
Simple ID addition. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06option: add Alcatel X200 to sendsetup blacklistDan Williams1-2/+11
This modem really wants sendsetup blacklisted for interfaces 0 and 1, otherwise the kernel hardlocks for about 10 seconds while waiting for the modem's firmware to respond, which it of course doesn't do. A slight complication here is that TCT (who owns the Alcatel brand) used the same USB IDs for the X200 as the X060s despite the devices having completely different firmware and AT command sets, so we end up adding the X060s to the blacklist at the same time. PSA to OEMs: don't use the same USB IDs for different devices. Really. It makes your kittens cry. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06option: add Zoom 4597 modem USB IDsDan Williams1-0/+4
Uses Longcheer-based firmware and AT command set. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman6-11/+51
git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: USB: xhci - fix interval calculation for FS isoc endpoints xhci: Disable MSI for some Fresco Logic hosts. xhci: Do not issue device reset when device is not setup xhci: Add defines for hardcoded slot states xhci: Bigendian fix for xhci_check_bandwidth() xhci: Bigendian fix for skip_isoc_td()
2011-06-06swiotlb: Export swioltb_nr_tbl and utilize it as appropiate.FUJITA Tomonori1-3/+9
By default the io_tlb_nslabs is set to zero, and gets set to whatever value is passed in via swiotlb_init_with_tbl function. The default value passed in is 64MB. However, if the user provides the 'swiotlb=<nslabs>' the default value is ignored and the value provided by the user is used... Except when the SWIOTLB is used under Xen - there the default value of 64MB is used and the Xen-SWIOTLB has no mechanism to get the 'io_tlb_nslabs' filled out by setup_io_tlb_npages functions. This patch provides a function for the Xen-SWIOTLB to call to see if the io_tlb_nslabs is set and if so use that value. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-06-06[S390] qdio: Split SBAL entry flagsJan Glauber6-62/+68
The qdio SBAL entry flag is made-up of four different values that are independent of one another. Some of the bits are reserved by the hardware and should not be changed by qdio. Currently all four values are overwritten since the SBAL entry flag is defined as an u32. Split the SBAL entry flag into four u8's as defined by the hardware and don't touch the reserved bits. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-06-06video: Fix use-after-free by vga16fb on rmmodBruno Prémont1-0/+2
Since fb_info is now refcounted and thus may get freed at any time it gets unregistered module unloading will try to unregister framebuffer as stored in platform data on probe though this pointer may be stale. Cleanup platform data on framebuffer release. CC: stable@kernel.org Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-06Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2-23/+22
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (max6642): Better chip detection schema hwmon: (coretemp) Further relax temperature range checks hwmon: (coretemp) Fix TjMax detection for older CPUs hwmon: (coretemp) Relax target temperature range check hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault
2011-06-05USB: xhci - fix interval calculation for FS isoc endpointsDmitry Torokhov1-2/+12
Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
2011-06-05drm/radeon/kms/atom: fix PHY initAlex Deucher1-6/+11
The PHY was not initialized correctly after ac89af1e1010640db072416c786f97391b85790f since the function bailed early as an encoder was not assigned. The encoder isn't necessary for PHY init so just assign to 0 for init so that the table is executed. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Tested-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-04drm/i915: Add a no lvds quirk for the Asus EeeBox PC EB1007Hans de Goede1-0/+8
I found this while figuring out why gnome-shell would not run on my Asus EeeBox PC EB1007. As a standalone "pc" this device cleary does not have an internal panel, yet it claims it does. Add a quirk to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Keith Packard <keithp@keithp.com> cc: stable@kernel.org Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: Share the common force-audio property between connectorsChris Wilson6-37/+38
Make the audio property creation routine common and share the single property between the connectors. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: Remove unused enum "chip_family"Chris Wilson1-7/+0
Superseded by the tracking the render generation in the chipset capabiltiies struct. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/915: fix relaxed tiling on gen2: tile heightDaniel Vetter1-2/+3
A tile on gen2 has a size of 2kb, stride of 128 bytes and 16 rows. Userspace was broken and assumed 8 rows. Chris Wilson noted that the kernel unfortunately can't reliable check that because libdrm rounds up the size to the next bucket. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915/crt: Explicitly return false if connected to a digital monitorChris Wilson1-0/+4
Rather than proceed on and silently return false by default, mention why we rejected the presence of an EDID as implying the presence of a VGA monitor. (The question arises whether there is a broken EDID which falsely reports a digital connection when attached by VGA.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: Replace ironlake_compute_wm0 with g4x_compute_wm0Chris Wilson1-68/+20
The computation of the first-level watermarks for g4x and gen5+ are based on the same algorithm, so we can refactor those code paths to use a single function. Note that g4x_compute_wm0 takes a 'plane' argument while ironlake_compute_wm0 took a 'pipe' argument. Both should have used a 'plane' argument, so this patch fixes that as well (not that it caused a problem; ironlake always uses pipe == plane). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: Only print out the actual number of fences for i915_error_stateDaniel Vetter1-1/+1
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: s/addr & ~PAGE_MASK/offset_in_page(addr)/Chris Wilson1-11/+10
Convert our open coded offset_in_page() to the common macro. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm: i915: correct return status in intel_hdmi_mode_valid()Nicolas Kaiser1-1/+1
Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: fix regression after clock gating init splitJason Stubbs1-0/+1
During the refactoring in revision 6067aaeadb5b3df26f27ac827256b1ef01e674f5, the intel_enable_clock_gating was split up into several functions that are then called indirectly. However, which function to call was not specified for the IS_PINEVIEW() case. This patch specifies the correct gating function. Signed-off-by: Jason Stubbs <jasonbstubbs@gmail.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04drm/i915: fix if statement in ivybridge irq handlerDan Carpenter1-1/+1
The extra semicolon was not intended. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-06-04hwmon: (max6642): Better chip detection schemaPer Dalén1-2/+16
Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: Per Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2-1/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure
2011-06-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds41-158/+269
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 17:35:36 +0000