summaryrefslogtreecommitdiff
path: root/drivers/net/fec.c
AgeCommit message (Collapse)AuthorFilesLines
2008-05-01m68knommu: fix FEC driver lockingSebastian Siewior1-22/+33
It's easy: grab locks before talking to hardware and realease them afterwards. The one big lock has been splitted into a hw_lock and mii_lock. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: kill warnings in FEC driverSebastian Siewior1-2/+8
linux-2.6-mk68/drivers/net/fec.c: In function 'fec_enet_module_init': linux-2.6-mk68/drivers/net/fec.c:2627: warning: unused variable 'j' linux-2.6-mk68/drivers/net/fec.c: At top level: linux-2.6-mk68/drivers/net/fec.c:2136: warning: 'mii_link_interrupt' defined but not used Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: remove unused interrupts in FEC driverGreg Ungerer1-34/+2
Remove the acquisition of unused interrupt types. We don't need to register all the TX and RX varients used on some ColdFire FEC hardware. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: fix ColdFire 5272 fec driver hash registersGreg Ungerer1-10/+14
Renamed the 5272 hash_table registers to match the "grp" hash_table registers of the other ColdFire parts. They are actually a group hash. The makes for consistent setup across all ColdFire parts. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04m68knommu: fix fec driver interrupt racesGreg Ungerer1-4/+4
The FEC driver has a common interrupt handler for all interrupt event types. It is raised on a number of distinct interrupt vectors. This handler can't be re-entered while processing an interrupt, so make sure all requested vectors are flagged as IRQF_DISABLED. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: improve mii_do_cmd code in FEC driverPhilippe De Muyter1-5/+2
Improve the readability of mii_do_cmd(). Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23m68knommu: improve code formating FEC driverPhilippe De Muyter1-12/+5
Indent all the `else' the same way. Remove some unecesary white space. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches1-4/+3
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET] drivers/net: statistics cleanup #1 -- save memory and shrink codeJeff Garzik1-30/+20
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-30setup and detect 2nd phy on MCF5275 in FEC driverMike Cruse1-0/+23
Added code to recognize the second interface on M5275 boards. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30clean up reading of ICR register in FEC driverGreg Ungerer1-3/+3
On the MCF5272, there is no need to read the ICR before writing it : the bit 4n+3 is a write-enable for the bits 4n,4n+1 and 4n+2. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30fix work queues in FEC driverGreg Ungerer1-6/+11
Fix the work queue code in the FEC driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30remove unused config symbol from FEC driverGreg Ungerer1-2/+0
Removed unused CONFIG symbol and its conditional code from FEC driver. Pointed out by Robert P. J. Day <rpjday@mindspring.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30include cacheflush.h in FEC driverGreg Ungerer1-0/+1
Include cacheflush.h to get definitions for cache functions used in this code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10[NET]: Kill eth_copy_and_sum().David S. Miller1-1/+1
It hasn't "summed" anything in over 7 years, and it's just a straight mempcy ala skb_copy_to_linear_data() so just get rid of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo1-1/+0
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells1-5/+5
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-13drivers/net: Trim trailing whitespaceJeff Garzik1-41/+41
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12[PATCH] Remove more unnecessary driver printk'sAndy Gospodarek1-2/+0
As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] m68knommu: FEC driver event/irq fixesGreg Ungerer1-39/+52
Collection of fixes for the ColdFire FEC ethernet driver: . reworked event setting so that it occurs after the MII setup. roucaries bastien <roucaries.bastien@gmail.com> . Do not read cbd_sc in memory for each bit we test. Once per buffer is enough. . Overrun errors must increase `rx_fifo_errors', not `rx_crc_errors' . No need for a special value to activate rx or tx. Only write access matters. . Simplify parameter of eth_copy_and_sum : `data' has already the right value. . Some spelling fixes. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: FEC driver set different priority/level on each IRQWillson Callan1-3/+3
Set different irq priority levels for each IRQ requested. According to the Freescale ColdFire documentation each separate IRQ must have its own unique priority/level combination. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: FEC driver support for the ColdFire 523x CPU familyMatt Waddel1-19/+179
Add support for the FEC module in the ColdFire 532x CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] m68knommu: avoid fec driver hang when link disappearsPhilippe De Muyter1-4/+11
Avoid requesting a `Graceful Transmit Stop' when link has disappeared, because that request cannot complete without link. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] m68knommu: FEC ethernet support for the ColdFire 5208Greg Ungerer1-22/+218
Add support for the new 5208 ColdFire (Matt Waddel / Mike Lavender) Patch originally from Matt Waddel (from code originally written by Mike Lavender). I also re-ordered the init code to avoid interrupt lockups on some platforms (at least the 5275, but others have reported it on the 5235 as well). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11[PATCH] m68knommu: ColdFire FEC eth driver improvementsGreg Ungerer1-230/+248
A few improvements to the Freescale/ColdFire FEC driver: . some formatting cleanups . add support for the FEC device in the ColdFire 523x processor family . add support for MAC address setting on MOD5272 and M5272C3 boards . don't re-read the PHY status register many times . ack status interrupt before reading status register . move printing init message to after full init (so that the ethX name is filled out for printing) Some parts of this patch submitted by Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+2259
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 17:43:53 +0000