summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-11-09Fix nfsd truncation of readdir resultsDoug Nazar1-4/+1
Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some situations" introduced a bug: on a directory in an exported ext3 filesystem with dir_index unset, a READDIR will only return about 250 entries, even if the directory was larger. Bisected it back to this commit; reverting it fixes the problem. It turns out that in this case ext3 reads a block at a time, then returns from readdir, which means we can end up with buf.full==0 but with more entries in the directory still to be read. Before 8d7c4203 (but after c002a6c797 "Optimise NFS readdir hack slightly"), this would cause us to return the READDIR result immediately, but with the eof bit unset. That could cause a performance regression (because the client would need more roundtrips to the server to read the whole directory), but no loss in correctness, since the cleared eof bit caused the client to send another readdir. After 8d7c4203, the setting of the eof bit made this a correctness problem. So, move nfserr_eof into the loop and remove the buf.full check so that we loop until buf.used==0. The following seems to do the right thing and reduces the network traffic since we don't return a READDIR result until the buffer is full. Tested on an empty directory & large directory; eof is properly sent and there are no more short buffers. Signed-off-by: Doug Nazar <nazard@dragoninc.ca> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-30NLM: Set address family before calling nlm_host_rebooted()Chuck Lever2-0/+2
The nlm_host_rebooted() function uses nlm_cmp_addr() to find an nsm_handle that matches the rebooted peer. In order for this to work, the passed-in address must have a proper address family. This fixes a post-2.6.28 regression introduced by commit 781b61a6, which added AF_INET6 support to nlm_cmp_addr(). Before that commit, nlm_cmp_addr() didn't care about the address family; it compared only the sin_addr.s_addr field for equality. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-30nfsd: fix failure to set eof in readdir in some situationsJ. Bruce Fields1-0/+1
Before 14f7dd632011bb89c035722edd6ea0d90ca6b078 "[PATCH] Copy XFS readdir hack into nfsd code", readdir_cd->err was reset to eof before each call to vfs_readdir; afterwards, it is set only once. Similarly, c002a6c7977320f95b5edede5ce4e0eeecf291ff "[PATCH] Optimise NFS readdir hack slightly", can cause us to exit without nfserr_eof set. Fix this. This ensures the "eof" bit is set when needed in readdir replies. (The particular case I saw was an nfsv4 readdir of an empty directory, which returned with no entries (the protocol requires "." and ".." to be filtered out), but with eof unset.) Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-26Linux 2.6.28-rc2Linus Torvalds1-1/+1
.. fix all the worst problems in -rc1
2008-10-26m68k: Disable Amiga serial console support if modularGeert Uytterhoeven1-2/+4
If CONFIG_AMIGA_BUILTIN_SERIAL=m, I get the following warnings: | drivers/char/amiserial.c: At top level: | drivers/char/amiserial.c:2138: warning: data definition has no type or storage class | drivers/char/amiserial.c:2138: warning: type defaults to 'int' in declaration of 'console_initcall' | drivers/char/amiserial.c:2138: warning: parameter names (without types) in function declaration | drivers/char/amiserial.c:2134: warning: 'amiserial_console_init' defined but not used because console_initcall() is not defined (nor really sensible) in the modular case. So disable serial console support if the driver is modular. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26epoll: avoid double-inserts in case of EFAULTDavide Libenzi1-2/+9
In commit f337b9c58332bdecde965b436e47ea4c94d30da0 ("epoll: drop unnecessary test") Thomas found that there is an unnecessary (always true) test in ep_send_events(). The callback never inserts into ->rdllink while the send loop is performed, and also does the ~EP_PRIVATE_BITS test. Given we're holding the mutex during this time, the conditions tested inside the loop are always true. HOWEVER. The test "!ep_is_linked(&epi->rdllink)" wasn't there because we insert into ->rdllink, but because the send-events loop might terminate before the whole list is scanned (-EFAULT). In such cases, when the loop terminates early, and when a (leftover) file received an event while we're performing the lockless loop, we need such test to avoid to double insert the epoll items. The list_splice() done a few steps below, will correctly re-insert the ones that were left on "txlist". This should fix the kenrel.org bugzilla entry 11831. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26select: deal with math overflow from borderline valid userland dataArjan van de Ven2-4/+6
Some userland apps seem to pass in a "0" for the seconds, and several seconds worth of usecs to select(). The old kernels accepted this just fine, so the new kernels must too. However, due to the upscaling of the microseconds to nanoseconds we had some cases where we got math overflow, and depending on the GCC version (due to inlining decisions) that actually resulted in an -EINVAL return. This patch fixes this by adding the excess microseconds to the seconds field. Also with thanks to Marcin Slusarz for spotting some implementation bugs in the diagnostics patches. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26wireless: fix regression caused by regulatory config optionArjan van de Ven1-6/+5
The default for the regulatory compatibility option is wrong; if you picked the default you ended up with a non-functional wifi system (at least I did on Fedora 9 with iwl4965). I don't think even the October 2008 releases of the various distros has the new userland so clearly the default is wrong, and also we can't just go about deleting this in 2.6.29... Change the default to "y" and also adjust the config text a little to reflect this. This patch fixes regression #11859 With thanks to Johannes Berg for the diagnostics Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26cgroup: remove unused variableStephen Rothwell1-1/+1
/scratch/sfr/next/kernel/cgroup.c: In function 'cgroup_tasks_start': /scratch/sfr/next/kernel/cgroup.c:2107: warning: unused variable 'i' Introduced in commit cc31edceee04a7b87f2be48f9489ebb72d264844 "cgroups: convert tasks file to use a seq_file with shared pid array". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds6-45/+73
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX hwmon: (abituguru3) Cosmetic whitespace fixes hwmon: (adt7473) Fix voltage conversion routines hwmon: (lm90) Add support for the LM99 16 degree offset hwmon: (lm90) Fix handling of hysteresis value hwmon-vid: Add support for AMD family 10h CPUs hwmon: (w83781d) Fix linking when built-in
2008-10-26r8169: revert "read MAC address from EEPROM on init"Francois Romieu1-88/+0
This reverts commit 7bf6bf4803df1adc927f585168d2135fb019c698. The code has both a short existence and an increasing track of failures despite some work to amend it for -rc1. It is not just a matter of reading the eeprom: sometimes the eeprom is read correctly, then the mac address is not written correctly back into the mac registers. Some chipsets seem to work reliably but it is not clear at this point if the code can simply be made to work on a per-chipset basis and post -rc1 is not the place where I want to experiment these things. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26arm ide breakageAl Viro2-4/+4
a) semicolon before the function body is a bad idea b) it's const struct foo, not struct const foo c) incidentally, it's ecard_remove_driver(), not ecard_unregister_driver() d) compiling is occasionally useful. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26fix allmodconfig breakageAl Viro1-2/+1
If you use KCONFIG_ALLCONFIG (even with empty file) you get broken allmodconfig/allyesconfig; CONFIG_MODULES gets turned off, with obvious massive fallout. Breakage had been introduced when conf_set_all_new_symbols() got used for allmodconfig et.al. What happens is that sym_calc_value(modules_sym) done in conf_read_simple() sets SYMBOL_VALID on both modules_sym and MODULES. When we get to conf_set_all_new_symbols(), we set sym->def[S_DEF_USER] on everything, but it has no effect on sym->curr for the symbols that already have SYMBOL_VALID - these are stuck. Solution: use sym_clear_all_valid() in there. Note that it makes reevaluation of modules_sym redundant - sym_clear_all_valid() will do that itself. [ Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11512, says Alexey ] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-26hwmon: (abituguru3) enable DMI probing feature on AW9D-MAXAlistair John Strachan1-1/+1
Switch the AW9D-MAX over from port probing to the preferred DMI probe method. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-26hwmon: (abituguru3) Cosmetic whitespace fixesAlistair John Strachan1-14/+14
As the probable result of zealous copy/pasting, many supported boards contain sensor names with trailing whitespace. Though this is not a huge problem, it is inconsistent with other sensor names, and with other similar hwmon drivers. Additionally, the DMI nag message added in 2.6.27 was missing a space between two sentence fragments -- might as well clean that up too. Doesn't alter any kernel text, just data. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-26hwmon: (adt7473) Fix voltage conversion routinesJean Delvare1-20/+9
Fix voltage conversion routines. Based on an earlier patch from Paulius Zaleckas. According to the datasheet voltage is scaled with resistors and value 192 is nominal voltage. 0 is 0V. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Darrick J. Wong <djwong@us.ibm.com>
2008-10-26hwmon: (lm90) Add support for the LM99 16 degree offsetJean Delvare2-5/+34
The LM99 differs from the LM86, LM89 and LM90 in that it reports remote temperatures (temp2) 16 degrees lower than they really are. So far we have been cheating and handled this in userspace but it really should be handled by the driver directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org>
2008-10-26hwmon: (lm90) Fix handling of hysteresis valueJean Delvare1-3/+12
There are several problems in the way the hysteresis value is handled by the lm90 driver: * In show_temphyst(), specific handling of the MAX6646 is missing, so the hysteresis is reported incorrectly if the critical temperature is over 127 degrees C. * In set_temphyst(), the new hysteresis register value is written to the chip but data->temp_hyst isn't updated accordingly, so there is a short period of time (up to 2 seconds) where the old hystereris value will be returned while the new one is already active. * In set_temphyst(), the critical temperature which is used as a base to compute the value of the hysteresis register lacks device-specific handling. As a result, the value of the hysteresis register might be incorrect for the ADT7461 and MAX6646 chips. Fix these 3 bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Nate Case <ncase@xes-inc.com>
2008-10-26hwmon-vid: Add support for AMD family 10h CPUsJean Delvare1-0/+1
The AMD family 10h CPUs use the same VID decoding table as the family 0Fh CPUs. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz>
2008-10-26hwmon: (w83781d) Fix linking when built-inGeert Uytterhoeven1-2/+2
When w83781d is built-in, the final links fails with the following vague error message: `.exit.text' referenced in section `.init.text' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o w83781d_isa_unregister() cannot be marked __exit, as it's also called from sensors_w83781d_init(), which is marked __init. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-25Merge branch 'for_linus' of ↵Linus Torvalds2-24/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Fix duplicate entries returned from getdents() system call ext3: Fix duplicate entries returned from getdents() system call
2008-10-25Revert "Call init_workqueues before pre smp initcalls."Linus Torvalds2-3/+2
This reverts commit a802dd0eb5fc97a50cf1abb1f788a8f6cc5db635 by moving the call to init_workqueues() back where it belongs - after SMP has been initialized. It also moves stop_machine_init() - which needs workqueues - to a later phase using a core_initcall() instead of early_initcall(). That should satisfy all ordering requirements, and was apparently the reason why init_workqueues() was moved to be too early. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-25ext4: Fix duplicate entries returned from getdents() system callTheodore Ts'o1-12/+8
Fix a regression caused by commit d0156417, "ext4: fix ext4_dx_readdir hash collision handling", where deleting files in a large directory (requiring more than one getdents system call), results in some filenames being returned twice. This was caused by a failure to update info->curr_hash and info->curr_minor_hash, so that if the directory had gotten modified since the last getdents() system call (as would be the case if the user is running "rm -r" or "git clean"), a directory entry would get returned twice to the userspace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> This patch fixes the bug reported by Markus Trippelsdorf at: http://bugzilla.kernel.org/show_bug.cgi?id=11844 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
2008-10-25ext3: Fix duplicate entries returned from getdents() system callTheodore Ts'o1-12/+8
Fix a regression caused by commit 6a897cf4, "ext3: fix ext3_dx_readdir hash collision handling", where deleting files in a large directory (requiring more than one getdents system call), results in some filenames being returned twice. This was caused by a failure to update info->curr_hash and info->curr_minor_hash, so that if the directory had gotten modified since the last getdents() system call (as would be the case if the user is running "rm -r" or "git clean"), a directory entry would get returned twice to the userspace. This patch fixes the bug reported by Markus Trippelsdorf at: http://bugzilla.kernel.org/show_bug.cgi?id=11844 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
2008-10-24libata: fix bug with non-ncq devicesJens Axboe1-1/+5
The recent commit 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e ("libata: switch to using block layer tagging support") to enable support for block layer tagging in libata was broken for non-NCQ devices The block layer initializes the tag field to -1 to detect invalid uses of a tag, and if the libata devices does NOT support NCQ, we just used that field to index the internal command list. So we need to check for -1 first and only use the tag field if it's valid. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Paul Mundt <lethal@linux-sh.org> Tested-by: Dave Young <hidave.darkstar@gmail.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Linux 2.6.28-rc1Linus Torvalds1-3/+3
2008-10-23Fix PCI hotplug printk formatRandy Dunlap1-1/+1
Fix printk format warning: drivers/pci/hotplug/acpiphp_ibm.c:207: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds16-263/+376
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove unused resource assignment in pci_read_bridge_bases() PCI hotplug: shpchp: message refinement PCI hotplug: shpchp: replace printk with dev_printk PCI: add routines for debugging and handling lost interrupts PCI hotplug: pciehp: message refinement PCI: fix ARI code to be compatible with mixed ARI/non-ARI systems PCI hotplug: cpqphp: fix kernel NULL pointer dereference
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds35-290/+556
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) tcp: Restore ordering of TCP options for the sake of inter-operability net: Fix disjunct computation of netdev features sctp: Fix to handle SHUTDOWN in SHUTDOWN_RECEIVED state sctp: Fix to handle SHUTDOWN in SHUTDOWN-PENDING state sctp: Add check for the TSN field of the SHUTDOWN chunk sctp: Drop ICMP packet too big message with MTU larger than current PMTU p54: enable 2.4/5GHz spectrum by eeprom bits. orinoco: reduce stack usage in firmware download path ath5k: fix suspend-related oops on rmmod [netdrvr] fec_mpc52xx: Implement polling, to make netconsole work. qlge: Fix MSI/legacy single interrupt bug. smc911x: Make the driver safer on SMP smc911x: Add IRQ polarity configuration smc911x: Allow Kconfig dependency on ARM sis190: add identifier for Atheros AR8021 PHY 8139x: reduce message severity on driver overlap igb: add IGB_DCA instead of selecting INTEL_IOATDMA igb: fix tx data corruption with transition to L0s on 82575 ehea: Fix memory hotplug support netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driver ...
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds5-9/+35
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: math-emu: Fix thinko in _FP_DIV math-emu: Fix signalling of underflow and inexact while packing result. sparc: Add checkstack support sparc: correct section of current_pc() sparc: correct section of apc_no_idle sparc64: Fix race in arch/sparc64/kernel/trampoline.S
2008-10-23PCI: remove unused resource assignment in pci_read_bridge_bases()Zhao, Yu1-3/+0
This cleanup removes the resource assignment in pci_read_bridge_bases() since it has taken care by pci_alloc_child_bus() when allocating the bus: /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RES_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; child->resource[i]->name = child->name; } Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: message refinementTaku Izumi5-98/+86
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: replace printk with dev_printkTaku Izumi5-159/+224
This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds13-27/+1157
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c ide-disk: set non-rotational queue flag for SSD and CF devices ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE list ide: Add tx4938ide driver (v2) TXx9: Add TX4938 ATA support (v3) ide: Add tx4939ide driver (v6) ide: two more pci_ioremap_bar() conversions pci: use pci_ioremap_bar() in drivers/ide sgiioc4: use ide_host_add() (take 2) sgiioc4: fix error cleanup path (take 2)
2008-10-23Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds12-157/+488
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds/acpi: Fix merge fallout from acpi_driver_data change leds: Simplify logic in leds-ams-delta leds: Fix trigger registration race leds: Fix leds-class.c comment leds: Add driver for HP harddisk protection LEDs leds: leds-pca955x - Mark pca955x_led_set() static leds: Remove uneeded leds-cm-x270 driver leds: Remove uneeded strlen calls leds: Add leds-wrap default-trigger leds: Make default trigger fields const leds: Add backlight LED trigger leds: da903x: Add support for LEDs found on DA9030/DA9034
2008-10-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds40-1248/+3594
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: corgi backlight driver should not select ssp drivers [ARM] 5321/1: Kirkwood: fix typo in Makefile [ARM] 5320/1: fix assembly constraints in implementation of do_div() [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S [ARM] 5316/1: AT91: oops (regression) fix on gpio irq [ARM] msm: vreg interface to msm7k pmic [ARM] msm: dma: various basic dma improvements and bugfixes [ARM] msm: clock: provide clk_*() api support for [ARM] msm: clean up iomap and devices [ARM] msm: add proc_comm support, necessary for clock and power control [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
2008-10-23Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds8-1/+942
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Add driver for Tabletkiosk Sahara TouchIT-213 Tablet PC backlight: da903x: Add backlight driver for DA9030/DA9034 tosa: add support for bl/lcd driver backlight: add support for Sharp SL-6000 LCD and backlight drivers
2008-10-23libata: switch to using block layer tagging supportJens Axboe4-65/+31
libata currently has a pretty dumb ATA_MAX_QUEUE loop for finding a free tag to use. Instead of fixing that up, convert libata to using block layer tagging - gets rid of code in libata, and is also much faster. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23PCI: add routines for debugging and handling lost interruptsJames Bottomley3-1/+69
We're getting a lot of storage drivers blamed for interrupt misrouting issues. This patch provides a standard way of reporting the problem ... and, if possible, correcting it. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: pciehp: message refinementTaku Izumi5-88/+78
This patch refines messages in pciehp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI: fix ARI code to be compatible with mixed ARI/non-ARI systemsZhao, Yu1-8/+13
The original ARI support code has a compatibility problem with non-ARI devices. If a device doesn't support ARI, turning on ARI forwarding on its upper level bridge will cause undefined behavior. This fix turns on ARI forwarding only when the subordinate devices support it. Tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: cpqphp: fix kernel NULL pointer dereferenceKenji Kaneshige1-1/+1
The following patch fixes the regression in 2.6.27 that causes kernel NULL pointer dereference at cpqphp driver probe time. This patch should be backported to the .27 stable series. Seems to have been introduced by f46753c5e354b857b20ab8e0fe7b2579831dc369. The root cause of this problem seems that cpqphp driver calls pci_hp_register() wrongly. In current implementation, cpqphp driver passes 'ctrl->pci_dev->subordinate' as a second parameter for pci_hp_register(). But because hotplug slots and it's hotplug controller (exists as a pci funcion) are on the same bus, it should be 'ctrl->pci_dev->bus' instead. Cc: <stable@kernel.org> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23leds/acpi: Fix merge fallout from acpi_driver_data changeStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-23ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.cBartlomiej Zolnierkiewicz2-1/+0
Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide-disk: set non-rotational queue flag for SSD and CF devicesBartlomiej Zolnierkiewicz1-2/+6
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide-cd: add TEAC CD-224E to the NO_AUTOCLOSE listMárton Németh1-0/+1
The "TEAC CD-ROM CD-224E" cannot close its tray, so add it to the NO_AUTOCLOSE list. This will correct the "Can close tray" field of /proc/sys/dev/cdrom/info. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Borislav Petkov <petkovbb@gmail.com> [bart: minor fixups to patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: Add tx4938ide driver (v2)Atsushi Nemoto3-0/+316
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode. It has custom set_pio_mode and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23TXx9: Add TX4938 ATA support (v3)Atsushi Nemoto3-0/+61
Add a helper routine to register tx4938ide driver and use it on RBTX4938 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: Add tx4939ide driver (v6)Atsushi Nemoto3-0/+761
This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23ide: two more pci_ioremap_bar() conversionsArjan van de Ven2-7/+5
based on suggestion from Sergei Shtylyov, there are two more places where using pci_ioremap_bar() makes sense. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>