summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-06-01FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptionsDavid Howells2-11/+3
Move the test for kernel mode processing from do_signal() into entry.S to also prevent system call exit tracing and userspace resumption notification handling happening when returning from kernel exceptions. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: signal_delivered()Al Viro34-83/+47
Does block_sigmask() + tracehook_signal_handler(); called when sigframe has been successfully built. All architectures converted to it; block_sigmask() itself is gone now (merged into this one). I'm still not too happy with the signature, but that's a separate story (IMO we need a structure that would contain signal number + siginfo + k_sigaction, so that get_signal_to_deliver() would fill one, signal_delivered(), handle_signal() and probably setup...frame() - take one). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01powerpc: get rid of restore_sigmask()Al Viro4-14/+4
... it's just a call of set_current_blocked() now Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from setAl Viro45-141/+17
Only 3 out of 63 do not. Renamed the current variant to __set_current_blocked(), added set_current_blocked() that will exclude unblockable signals, switched open-coded instances to it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01set_restore_sigmask() is never called without SIGPENDING (and never should be)Al Viro8-8/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is setAl Viro13-19/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01don't call try_to_freeze() from do_signal()Al Viro7-28/+0
get_signal_to_deliver() will handle it itself Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01pull clearing RESTORE_SIGMASK into block_sigmask()Al Viro34-387/+130
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01sh64: failure to build sigframe != signal without handlerAl Viro1-1/+1
it's actually "send me SIGSEGV"... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01openrisc: tracehook_signal_handler() is supposed to be called on successAl Viro1-14/+6
... not if sigframe couldn't have been built. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: sigmask_to_save()Al Viro31-250/+92
replace boilerplate "should we use ->saved_sigmask or ->blocked?" with calls of obvious inlined helper... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helper: restore_saved_sigmask()Al Viro32-125/+38
first fruits of ..._restore_sigmask() helpers: now we can take boilerplate "signal didn't have a handler, clear RESTORE_SIGMASK and restore the blocked mask from ->saved_mask" into a common helper. Open-coded instances switched... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01new helpers: {clear,test,test_and_clear}_restore_sigmask()Al Viro8-0/+125
helpers parallel to set_restore_sigmask(), used in the next commits Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01HAVE_RESTORE_SIGMASK is defined on all architectures nowAl Viro5-14/+4
Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK and picks default set_restore_sigmask() in linux/thread_info.h. Kill the ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones get merged. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01dell-laptop: Remove rfkill codeMatthew Garrett1-289/+0
The interface just doesn't work on some machines, and Dell haven't been able to tell us either which machines those are or what we should be doing instead. This would be fine, except it results in userspace ending up confused and general sadness. So let's just rip it out for now. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01nfs: don't open in ->d_revalidateMiklos Szeredi2-55/+78
NFSv4 can't do reliable opens in d_revalidate, since it cannot know whether a mount needs to be followed or not. It does check d_mountpoint() on the dentry, which can result in a weird error if the VFS found that the mount does not in fact need to be followed, e.g.: # mount --bind /mnt/nfs /mnt/nfs-clone # echo something > /mnt/nfs/tmp/bar # echo x > /tmp/file # mount --bind /tmp/file /mnt/nfs-clone/tmp/bar # cat /mnt/nfs/tmp/bar cat: /mnt/nfs/tmp/bar: Not a directory Which should, by any sane filesystem, result in "something" being printed. So instead do the open in f_op->open() and in the unlikely case that the cached dentry turned out to be invalid, drop the dentry and return EOPENSTALE to let the VFS retry. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: retry last component if opening stale dentryMiklos Szeredi2-2/+36
NFS optimizes away d_revalidates for last component of open. This means that open itself can find the dentry stale. This patch allows the filesystem to return EOPENSTALE and the VFS will retry the lookup on just the last component if possible. If the lookup was done using RCU mode, including the last component, then this is not possible since the parent dentry is lost. In this case fall back to non-RCU lookup. Currently this is not used since NFS will always leave RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: nameidata_to_filp(): don't throw away file on errorMiklos Szeredi1-3/+5
If open fails, don't put the file. This allows it to be reused if open needs to be retried. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: nameidata_to_filp(): inline __dentry_open()Miklos Szeredi1-2/+18
Copy __dentry_open() into nameidata_to_filp(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_dentry_open(): don't put filpMiklos Szeredi1-1/+2
Move put_filp() out to __dentry_open(), the only caller now. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: split __dentry_open()Miklos Szeredi2-14/+34
Split __dentry_open() into two functions: do_dentry_open() - does most of the actual work, doesn't put file on failure open_check_o_direct() - after a successful open, checks direct_IO method This will allow i_op->atomic_open to do just the file initialization and leave the direct_IO checking to the VFS. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last() common post lookupMiklos Szeredi1-31/+3
Now the post lookup code can be shared between O_CREAT and plain opens since they are essentially the same. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): add audit_inode before openMiklos Szeredi1-0/+1
This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): only return EISDIR for O_CREATMiklos Szeredi1-1/+1
This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): check LOOKUP_DIRECTORYMiklos Szeredi1-0/+3
Check for ENOTDIR before finishing open. This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): make ENOENT exit RCU safeMiklos Szeredi1-2/+4
This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: make follow_link check RCU safeMiklos Szeredi1-2/+10
This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): use inode variableMiklos Szeredi1-3/+5
Use helper variable instead of path->dentry->d_inode before complete_walk(). This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): inline walk_component()Miklos Szeredi1-5/+30
Copy walk_component() into do_lookup(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): make exit RCU safeMiklos Szeredi1-1/+1
Allow returning from do_last() with LOOKUP_RCU still set on the "out:" and "exit:" labels. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: split do_lookup()Miklos Szeredi1-14/+45
Split do_lookup() into two functions: lookup_fast() - does cached lookup without i_mutex lookup_slow() - does lookup with i_mutex Both follow managed dentries. The new functions are needed by atomic_open. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01x86, efi: Add EFI boot stub documentationMatt Fleming2-0/+67
Since we can't expect every user to read the EFI boot stub code it seems prudent to have a couple of paragraphs explaining what it is and how it works. The "initrd=" option in particular is tricky because it only understands absolute EFI-style paths (backslashes as directory separators), and until now this hasn't been documented anywhere. This has tripped up a couple of users. Cc: Matthew Garrett <mjg@redhat.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1331907517-3985-4-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01x86, efi; Add EFI boot stub console supportMatt Fleming2-16/+75
We need a way of printing useful messages to the user, for example when we fail to open an initrd file, instead of just hanging the machine without giving the user any indication of what went wrong. So sprinkle some error messages throughout the EFI boot stub code to make it easier for users to diagnose/report problems. Reported-by: Keshav P R <the.ridikulus.rat@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1331907517-3985-3-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01x86, efi: Only close open files in error pathMatt Fleming1-1/+1
The loop at the 'close_handles' label in handle_ramdisks() should be using 'i', which represents the number of initrd files that were successfully opened, not 'nr_initrds' which is the number of initrd= arguments passed on the command line. Currently, if we execute the loop to close all file handles and we failed to open any initrds we'll try to call the close function on a garbage pointer, causing the machine to hang. Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/1331907517-3985-2-git-send-email-matt@console-pimps.org Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-01Btrfs: move over to use ->update_timeJosef Bacik3-41/+15
Btrfs had been doing it's own file_update_time so we could catch ENOSPC properly, so just update our btrfs_update_time to work with the new stuff and then we'll be fancy later. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01fs: introduce inode operation ->update_timeJosef Bacik12-29/+86
Btrfs has to make sure we have space to allocate new blocks in order to modify the inode, so updating time can fail. We've gotten around this by having our own file_update_time but this is kind of a pain, and Christoph has indicated he would like to make xfs do something different with atime updates. So introduce ->update_time, where we will deal with i_version an a/m/c time updates and indicate which changes need to be made. The normal version just does what it has always done, updates the time and marks the inode dirty, and then filesystems can choose to do something different. I've gone through all of the users of file_update_time and made them check for errors with the exception of the fault code since it's complicated and I wasn't quite sure what to do there, also Jan is going to be pushing the file time updates into page_mkwrite for those who have it so that should satisfy btrfs and make it not a big deal to check the file_update_time() return code in the generic fault path. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-06-01drm/edid: Make the header fixup threshold tunableAdam Jackson1-2/+9
6 bytes seems to be a reasonable default so far, but for the desperate it's worth exposing this. [airlied: change include to module.h for this] Bugzilla: https://bugzilla.redhat.com/582559 Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fix regression in UMS CS ioctlAlex Deucher1-14/+17
radeon_cs_parser_init is called by both the legacy UMS CS ioctl and the KMS CS ioctl. Protect KMS specific pieces of the code by checking that rdev is not NULL. Reported-by: Michael Burian <michael.burian@sbg.at> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/vmwgfx: Fix nasty write past alloced memory areaThomas Hellstrom1-1/+1
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/ttm: Fix spinlock imbalanceThomas Hellstrom1-0/+1
This imbalance may cause hangs when TTM is trying to swap out a buffer that is already on the delayed delete list. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01drm/radeon: fixup tiling group size and backendmap on r6xx-r9xx (v4)Alex Deucher9-991/+222
Tiling group size is always 256bits on r6xx/r7xx/r8xx/9xx. Also fix and simplify render backend map. This now properly sets up the backend map on r6xx-9xx which should improve 3D performance. Vadim benchmarked also: Some benchmarks on juniper (5750), fullscreen 1920x1080, first result - kernel 3.4.0+ (fb21affa), second - with these patches: Lightsmark: 91 fps => 123 fps +35% Doom3: 74 fps => 101 fps +36% Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds33-866/+2849
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "This includes a fairly large change from Josef around data writeback completion. Before, the writeback wasn't completed until the metadata insertions for the extent were done, and this made for fairly large latency spikes on the last page of each ordered extent. We already had a separate mechanism for tracking pending metadata insertions, so Josef just needed to tweak things a little to end writeback earlier on the page. Overall it makes us much friendly to memory reclaim and lowers latencies quite a lot for synchronous IO. Jan Schmidt has finished some background work required to track btree blocks as they go through changes in ownership. It's the missing piece he needed for both btrfs send/receive and subvolume quotas. Neither of those are ready yet, but the new tracking code is included here. Most of the time, the new code is off. It is only used by scrub and other backref walkers. Stefan Behrens has added io failure tracking. This includes counters for which drives are causing the most trouble so the admin (or an automated tool) can choose to kick them out. We're tracking IO errors, crc errors, and generation checks we do on each metadata block. RAID5/6 did miss the cut this time because I'm having trouble with corruptions. I'll nail it down next week and post as a beta testing before 3.6" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (58 commits) Btrfs: fix tree mod log rewinded level and rewinding of moved keys Btrfs: fix tree mod log del_ptr Btrfs: add tree_mod_dont_log helper Btrfs: add missing spin_lock for insertion into tree mod log Btrfs: add inodes before dropping the extent lock in find_all_leafs Btrfs: use delayed ref sequence numbers for all fs-tree updates Btrfs: fix false positive in check-integrity on unmount Btrfs: fix runtime warning in check-integrity check data mode Btrfs: set ioprio of scrub readahead to idle Btrfs: fix return code in drop_objectid_items Btrfs: check to see if the inode is in the log before fsyncing Btrfs: return value of btrfs_read_buffer is checked correctly Btrfs: read device stats on mount, write modified ones during commit Btrfs: add ioctl to get and reset the device stats Btrfs: add device counters for detected IO and checksum errors btrfs: Drop unused function btrfs_abort_devices() Btrfs: fix the same inode id problem when doing auto defragment Btrfs: fall back to non-inline if we don't have enough space Btrfs: fix how we deal with the orphan block rsv Btrfs: convert the inode bit field to use the actual bit operations ...
2012-06-01Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linuxLinus Torvalds23-435/+522
Pull the rest of the nfsd commits from Bruce Fields: "... and then I cherry-picked the remainder of the patches from the head of my previous branch" This is the rest of the original nfsd branch, rebased without the delegation stuff that I thought really needed to be redone. I don't like rebasing things like this in general, but in this situation this was the lesser of two evils. * 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits) nfsd4: fix, consolidate client_has_state nfsd4: don't remove rebooted client record until confirmation nfsd4: remove some dprintk's and a comment nfsd4: return "real" sequence id in confirmed case nfsd4: fix exchange_id to return confirm flag nfsd4: clarify that renewing expired client is a bug nfsd4: simpler ordering of setclientid_confirm checks nfsd4: setclientid: remove pointless assignment nfsd4: fix error return in non-matching-creds case nfsd4: fix setclientid_confirm same_cred check nfsd4: merge 3 setclientid cases to 2 nfsd4: pull out common code from setclientid cases nfsd4: merge last two setclientid cases nfsd4: setclientid/confirm comment cleanup nfsd4: setclientid remove unnecessary terms from a logical expression nfsd4: move rq_flavor into svc_cred nfsd4: stricter cred comparison for setclientid/exchange_id nfsd4: move principal name into svc_cred nfsd4: allow removing clients not holding state nfsd4: rearrange exchange_id logic to simplify ...
2012-06-01toshiba_acpi: Fix mis-mergeMatthew Garrett1-1/+1
I managed to screw up the various backlight changes and ended up memsetting the props structure after it had already been populated. This should fix it. Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-06-01drm/radeon: fix HD6790, HD6570 backend programmingJerome Glisse1-2/+2
Without this bit sets we get broken rendering and lockups. fglrx sets this bit. Bugs that should be fixed by this patch : https://bugs.freedesktop.org/show_bug.cgi?id=49792 https://bugzilla.kernel.org/show_bug.cgi?id=43207 https://bugs.freedesktop.org/show_bug.cgi?id=39282 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-01reiserfs: get rid of resierfs_sync_superArtem Bityutskiy3-11/+55
This patch stops reiserfs using the VFS 'write_super()' method along with the s_dirt flag, because they are on their way out. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblock using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds, even if there are no diry superblocks, or there are no client file-systems which would need this (e.g., btrfs does not use '->write_super()'). So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super()' VFS service, and then remove it together with the kernel thread. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: mark the superblock as dirty a bit laterArtem Bityutskiy1-2/+1
The 'journal_mark_dirty()' function currently first marks the superblock as dirty by setting 's_dirt' to 1, then does various sanity checks and returns, then actuall does all the magic with the journal. This is not an ideal order, though. It makes more sense to first do all the checks, then do all the internal stuff, and at the end notify the VFS that the superblock is now dirty. This patch moves the 's_dirt = 1' assignment from the very beginning of this function to the very end. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: remove useless superblock dirtyingArtem Bityutskiy1-1/+0
The 'reiserfs_resize()' function marks the superblock as dirty by assigning 1 to 's_dirt' and then calls 'journal_mark_dirty()' which does the same. Thus, we can remove the assignment from 'reiserfs_resize()'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: clean-up function return typeArtem Bityutskiy2-6/+4
Turn 'reiserfs_flush_old_commits()' into a void function because the callers do not cares about what it returns anyway. We are going to remove the 'sb->s_dirt' field completely and this patch is a small step towards this direction. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01reiserfs: cleanup reiserfs_fill_super a bitArtem Bityutskiy1-10/+10
We have the reiserfs superblock pointer in the 'sbi' variable in this function, no need to use the 'REISERFS_SB(s)' macro which is the same. This is jut a small clean-up. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 02:44:30 +0000