Paravirtualized RDMA Device (PVRDMA) ==================================== 1. Description =============== PVRDMA is the QEMU implementation of VMware's paravirtualized RDMA device. It works with its Linux Kernel driver AS IS, no need for any special guest modifications. While it complies with the VMware device, it can also communicate with bare metal RDMA-enabled machines as peers. It does not require an RDMA HCA in the host, it can work with Soft-RoCE (rxe). It does not require the whole guest RAM to be pinned allowing memory over-commit and, even if not implemented yet, migration support will be possible with some HW assistance. A project presentation accompany this document: - http://events.linuxfoundation.org/sites/events/files/slides/lpc-2017-pvrdma-marcel-apfelbaum-yuval-shaia.pdf 2. Setup ======== 2.1 Guest setup =============== Fedora 27+ kernels work out of the box, older distributions require updating the kernel to 4.14 to include the pvrdma driver. However the libpvrdma library needed by User Level Software is still not available as part of the distributions, so the rdma-core library needs to be compiled and optionally installed. Please follow the instructions at: https://github.com/linux-rdma/rdma-core.git 2.2 Host Setup ============== The pvrdma backend is an ibdevice interface that can be exposed either by a Soft-RoCE(rxe) device on machines with no RDMA device, or an HCA SRIOV function(VF/PF). Note that ibdevice interfaces can't be shared between pvrdma devices, each one requiring a separate instance (rxe or SRIOV VF). 2.2.1 Soft-RoCE backend(rxe) =========================== A stable version of rxe is required, Fedora 27+ or a Linux Kernel 4.14+ is preferred. The rdma_rxe module is part of the Linux Kernel but not loaded by default. Install the User Level library (librxe) following the instructions from: https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home Associate an ETH interface with rxe by running: rxe_cfg add eth0 An rxe0 ibdevice interface will be created and can be used as pvrdma backend. 2.2.2 RDMA device Virtual Function backend ========================================== Nothing special is required, the pvrdma device can work not only with Ethernet Links, but also Infinibands Links. All is needed is an ibdevice with an active port, for Mellanox cards will be something like mlx5_6 which can be the backend. 2.2.3 QEMU setup ================ Configure QEMU with --enable-rdma flag, installing the required RDMA libraries. 3. Usage ======== 3.1 VM Memory settings ====================== Currently the device is working only with memory backed RAM and it must be mark as "shared": -m 1G \ -object memory-backend-ram,id=mb1,size=1G,share \ -numa node,memdev=mb1 \ 3.2 MAD Multiplexer =================== MAD Multiplexer is a service that exposes MAD-like interface for VMs in order to overcome the limitation where only single entity can register with MAD layer to send and receive RDMA-CM MAD packets. To build rdmacm-mux run # make rdmacm-mux The application accepts 3 command line arguments and exposes a UNIX socket to pass control and data to it. -d rdma-device-name Name of RDMA device to register with -s unix-socket-path Path to unix socket to listen (default /var/run/rdmacm-mux) -p rdma-device-port Port number of RDMA device to register with (default 1) The final UNIX socket file name is a concatenation of the 3 arguments so for example for device mlx5_0 on port 2 this /var/run/rdmacm-mux-mlx5_0-2 will be created. pvrdma requires this service. Please refer to contrib/rdmacm-mux for more details. 3.3 Service exposed by libvirt daemon ===================================== The control over the RDMA device's GID table is done by updating the device's Ethernet function addresses. Usually the first GID entry is determined by the MAC address, the second by the first IPv6 address and the third by the IPv4 address. Other entries can be added by adding more IP addresses. The opposite is the same, i.e. whenever an address is removed, the corresponding GID entry is removed. The process is done by the network and RDMA stacks. Whenever an address is added the ib_core driver is notified and calls the device driver add_gid function which in turn update the device. To support this in pvrdma device the device hooks into the create_bind and destroy_bind HW commands triggered by pvrdma driver in guest. Whenever changed is made to the pvrdma port's GID table a special QMP messages is sent to be processed by libvirt to update the address of the backend Ethernet device. pvrdma requires that libvirt service will be up. 3.4 PCI devices settings ======================== RoCE device exposes two functions - an Ethernet and RDMA. To support it, pvrdma device is composed of two PCI functions, an Ethernet device of type vmxnet3 on PCI slot 0 and a PVRDMA device on PCI slot 1. The Ethernet function can be used for other Ethernet purposes such as IP. 3.5 Device parameters ===================== - netdev: Specifies the Ethernet device function name on the host for example enp175s0f0. For Soft-RoCE device (rxe) this would be the Ethernet device used to create it. - ibdev: The IB device name on host for example rxe0, mlx5_0 etc. - mad-chardev: The name of the MAD multiplexer char device. - ibport: In case of multi-port device (such as Mellanox's HCA) this specify the port to use. If not set 1 will be used. - dev-caps-max-mr-size: The maximum size of MR. - dev-caps-max-qp: Maximum number of QPs. - dev-caps-max-sge: Maximum number of SGE elements in WR. - dev-caps-max-cq: Maximum number of CQs. - dev-caps-max-mr: Maximum number of MRs. - dev-caps-max-pd: Maximum number of PDs. - dev-caps-max-ah: Maximum number of AHs. Notes: - The first 3 parameters are mandatory settings, the rest have their defaults. - The last 8 parameters (the ones that prefixed by dev-caps) defines the top limits but the final values is adjusted by the backend device limitations. - netdev can be extracted from ibdev's sysfs (/sys/class/infiniband//device/net/) 3.6 Example =========== Define bridge device with vmxnet3 network backend:
Define pvrdma device: 4. Implementation details ========================= 4.1 Overview ============ The device acts like a proxy between the Guest Driver and the host ibdevice interface. On configuration path: - For every hardware resource request (PD/QP/CQ/...) the pvrdma will request a resource from the backend interface, maintaining a 1-1 mapping between the guest and host. On data path: - Every post_send/receive received from the guest will be converted into a post_send/receive for the backend. The buffers data will not be touched or copied resulting in near bare-metal performance for large enough buffers. - Completions from the backend interface will result in completions for the pvrdma device. 4.2 PCI BARs ============ PCI Bars: BAR 0 - MSI-X MSI-X vectors: (0) Command - used when execution of a command is completed. (1) Async - not in use. (2) Completion - used when a completion event is placed in device's CQ ring. BAR 1 - Registers -------------------------------------------------------- | VERSION | DSR | CTL | REQ | ERR | ICR | IMR | MAC | -------------------------------------------------------- DSR - Address of driver/device shared memory used for the command channel, used for passing: - General info such as driver version - Address of 'command' and 'response' - Address of async ring - Address of device's CQ ring - Device capabilities CTL - Device control operations (activate, reset etc) IMG - Set interrupt mask REQ - Command execution register ERR - Operation status BAR 2 - UAR --------------------------------------------------------- | QP_NUM | SEND/RECV Flag || CQ_NUM | ARM/POLL Flag | --------------------------------------------------------- - Offset 0 used for QP operations (send and recv) - Offset 4 used for CQ operations (arm and poll) 4.3 Major flows =============== 4.3.1 Create CQ =============== - Guest driver - Allocates pages for CQ ring - Creates page directory (pdir) to hold CQ ring's pages - Initializes CQ ring - Initializes 'Create CQ' command object (cqe, pdir etc) - Copies the command to 'command' address - Writes 0 into REQ register - Device - Reads the request object from the 'command' address - Allocates CQ object and initialize CQ ring based on pdir - Creates the backend CQ - Writes operation status to ERR register - Posts command-interrupt to guest - Guest driver - Reads the HW response code from ERR register 4.3.2 Create QP =============== - Guest driver - Allocates pages for send and receive rings - Creates page directory(pdir) to hold the ring's pages - Initializes 'Create QP' command object (max_send_wr, send_cq_handle, recv_cq_handle, pdir etc) - Copies the object to 'command' address - Write 0 into REQ register - Device - Reads the request object from 'command' address - Allocates the QP object and initialize - Send and recv rings based on pdir - Send and recv ring state - Creates the backend QP - Writes the operation status to ERR register - Posts command-interrupt to guest - Guest driver - Reads the HW response code from ERR register 4.3.3 Post receive ================== - Guest driver - Initializes a wqe and place it on recv ring - Write to qpn|qp_recv_bit (31) to QP offset in UAR - Device - Extracts qpn from UAR - Walks through the ring and does the following for each wqe - Prepares the backend CQE context to be used when receiving completion from backend (wr_id, op_code, emu_cq_num) - For each sge prepares backend sge - Calls backend's post_recv 4.3.4 Process backend events ============================ - Done by a dedicated thread used to process backend events; at initialization is attached to the device and creates the communication channel. - Thread main loop: - Polls for completions - Extracts QEMU _cq_num, wr_id and op_code from context - Writes CQE to CQ ring - Writes CQ number to device CQ - Sends completion-interrupt to guest - Deallocates context - Acks the event to backend 5. Limitations ============== - The device obviously is limited by the Guest Linux Driver features implementation of the VMware device API. - Memory registration mechanism requires mremap for every page in the buffer in order to map it to a contiguous virtual address range. Since this is not the data path it should not matter much. If the default max mr size is increased, be aware that memory registration can take up to 0.5 seconds for 1GB of memory. - The device requires target page size to be the same as the host page size, otherwise it will fail to init. - QEMU cannot map guest RAM from a file descriptor if a pvrdma device is attached, so it can't work with huge pages. The limitation will be addressed in the future, however QEMU allocates Guest RAM with MADV_HUGEPAGE so if there are enough huge pages available, QEMU will use them. QEMU will fail to init if the requirements are not met. 6. Performance ============== By design the pvrdma device exits on each post-send/receive, so for small buffers the performance is affected; however for medium buffers it will became close to bare metal and from 1MB buffers and up it reaches bare metal performance. (tested with 2 VMs, the pvrdma devices connected to 2 VFs of the same device) All the above assumes no memory registration is done on data path.