summaryrefslogtreecommitdiff
path: root/slirp
AgeCommit message (Collapse)AuthorFilesLines
2011-10-21main-loop: create main-loop.cPaolo Bonzini1-11/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-09-28slirp: Fix packet expirationThomas Huth1-2/+3
The two new variables "arp_requested" and "expiration_date" in the mbuf structure have been added after the variable-sized "m_dat_" array. The variables have to be added before the m_dat_ array instead. Without this patch, the expiration_date gets clobbered by code that accesses the m_dat_ array. I experienced this problem with the code in slirp/tftp.c: The tftp_send_data() function created a new packet with the m_get() function (which fills-in a default expiration_date value). Then the TFTP code cleared the data section of the packet, which accidentially also cleared the expiration_date. This zeroed expiration_date then finally causes the packet to be discarded during if_start(), so that TFTP packets were not transmitted anymore. [Jan: added comment as suggested by Fabien ] CC: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-09-28slirp: Fix use after release on tcp_inputJan Kiszka1-12/+10
ti points into the m buffer. But the latter may already be released right after the dodata: label. Move the test before the potential release. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-09-20Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori1-0/+1
2011-09-16Remove blanks before \n in output stringsStefan Weil2-5/+5
Those blanks violate the coding conventions, see scripts/checkpatch.pl. Blanks missing after colons in the changed lines were added. This patch does not try to fix tabs, long lines and other problems in the changed lines, therefore checkpatch.pl reports many violations. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16slirp: Fill TCP/IP header template after SYN receptionJan Kiszka1-0/+1
This ensures we can cleanly signal the drop in case the connection timer fires. So far we sent those frames to nowhere (target IP 0.0.0.0). Found by the new assertion on invalid IPs in arp_table_search. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-09-09Fix include statements for qemu-common.hStefan Weil1-1/+1
* qemu-common.h is not a system include file, so it should be included with "" instead of <>. Otherwise incremental builds might fail because only local include files are checked for changes. * linux-user/syscall.c included the file twice. Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-03Use new macro QEMU_PACKED for packed structuresStefan Weil2-9/+9
Most changes were made using these commands: git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/' git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/' git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/' Whitespace in linux-user/syscall_defs.h was fixed manually to avoid warnings from scripts/checkpatch.pl. Manual changes were also applied to hw/pc.c. I did not fix indentation with tabs in block/vvfat.c. The patch will show 4 errors with scripts/checkpatch.pl. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-22char: rename qemu_chr_write() -> qemu_chr_fe_write()Anthony Liguori1-1/+1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-21Merge branch 'queues/slirp' of git://git.kiszka.org/qemuBlue Swirl2-6/+6
* 'queues/slirp' of git://git.kiszka.org/qemu: slirp: Fix bit field types in IP header structs
2011-08-20Use glib memory allocation and free functionsAnthony Liguori3-10/+10
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-14slirp: Fix bit field types in IP header structsJan Kiszka2-6/+6
-mms-bitfields prevents that the bitfields in current IP header structs are packed into a single byte as it is required. Fix this by using uint8_t as backing type. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-05slirp: Only start packet expiration for delayed onesJan Kiszka2-3/+3
The expiration timeout must only affect packets that are queued due to pending ARP resolutions. The old version broke ping e.g. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-05slirp: Read current time only once per if_start callJan Kiszka1-4/+1
No need to update the current time for each packet we send from the queue. Processing time is comparably short. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-05slirp: Fix types of IP address parametersJan Kiszka2-10/+10
Should be uint32_t for IPv4, not int. Also avoid in_addr_t without proper includes. Fixes build regression on mingw32. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03Delayed IP packetsFabien Chouteau5-37/+69
In the current implementation, if Slirp tries to send an IP packet to a client with an unknown hardware address, the packet is simply dropped and an ARP request is sent (if_encap in slirp/slirp.c). With this patch, Slirp will send the ARP request, re-queue the packet and try to send it later. The packet is dropped after one second if the ARP reply is not received. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03Simple ARP tableFabien Chouteau4-58/+168
This patch adds a simple ARP table in Slirp and also adds handling of gratuitous ARP requests. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-07-27slirp: Fix unusual "comments" in unused codeStefan Weil1-2/+2
cppcheck detected two rather strange comments which were not correctly written as C comments. They did not cause any harm because they were framed by #ifdef notdef ... #endif, so they were never compiled. Fix them nevertheless (we could also remove the unused code). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-07-25Wrap recv to avoid warningsBlue Swirl3-4/+4
Avoid warnings like these by wrapping recv(): CC slirp/ip_icmp.o /src/qemu/slirp/ip_icmp.c: In function 'icmp_receive': /src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror] /usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *' Remove also casts used to avoid warnings. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-23slirp: Forward ICMP echo requests via unprivileged socketsJan Kiszka7-1/+147
Linux 3.0 gained support for unprivileged ICMP ping sockets. Use this feature to forward guest pings to the outer world. The host admin has to set the ping_group_range in order to grant access to those sockets. To allow ping for the users group (GID 100): echo 100 100 > /proc/sys/net/ipv4/ping_group_range Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23slirp: Put forked exec into separate process groupJan Kiszka1-1/+2
Recent smb daemons tend to terminate themselves via a process group SIGTERM. If the daemon is still in qemu's group by that time, qemu will die as well. Avoid this by always pushing fork_exec processes into a group of their own, not just (unused) type 2 execs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23slirp: Replace m_freem with m_freeJan Kiszka7-19/+16
Remove this pointless wrapping. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23slirp: Strictly associate DHCP/BOOTP and TFTP with virtual hostJan Kiszka1-5/+8
Instead of accepting every DHCP/BOOTP and TFTP packet, only invoke the built-in servers if the target is the virtual host. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23slirp: Fix restricted modeJan Kiszka3-25/+6
This aligns the code to what the documentation claims: Allow everything but requests that would have to be routed outside of the virtual LAN. So we need to drop the unneeded IP-level filter, allow TFTP requests, and add the missing protocol-level filter to ICMP. CC: Gleb Natapov <gleb@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-29add a service to reap zombies, use it in SLIRPPaolo Bonzini1-1/+4
SLIRP -smb support wants to fork a process and forget about reaping it. To please it, add a generic service to register a process id and let QEMU reap it. In the future it could be enhanced to pass a status, but this would be unused. With this in place, the SIGCHLD signal handler would not stomp on pclose anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-21change all rt_clock references to use millisecond resolution accessorsPaolo Bonzini1-1/+1
This was done with: sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \ $(git grep -l 'get_clock\>.*rt_clock' ) sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \ $(git grep -l 'new_timer\>.*rt_clock' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-05net: fix trace when debug is activated in slirpVincent Palatin1-1/+1
make the code compile correctly when DEBUG is activated. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-25slirp: Remove some type casts caused by bad declaration of x.tp_bufStefan Weil2-8/+8
x.tp_buf was declared as a uint8_t array, but always used as a char array (which needed a lot of type casts). The patch includes these changes: * Fix declaration of x.tp_buf and remove all type casts. * Use offsetof() to get the offset of x.tp_buf. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-14Fix build from previous commitAnthony Liguori1-1/+1
I unfortunately got on an unnamed branch and pushed the wrong bits Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-14PATCH] slirp: fix buffer overrunBruce Rogers1-2/+2
Since the addition of the slirp member to struct mbuf, the value of SLIRP_MSIZE and the initialization of m_size have not been correct, resulting in overrunning the end of the malloc'd buffer in some cases. Signed-off-by: Bruce Rogers <brogers@novell.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-01-23Delete useless 'extern' qualifiers for functionsBlue Swirl1-1/+1
'extern' qualifier is useless for function declarations. Delete them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-13slirp: Use strcasecmp() to check tftp mode, tsizeSergei Gavrikov1-2/+2
According to RFC 1350 (TFTP Revision 2) the mode field can contain any combination of upper and lower case; also RFC 2349 propagates that the transfer size option ("tsize") is case in-sensitive too. Current implementation of embedded TFTP server missed that what does mess some TFTP clients. Fixed by using STRCASECMP(3) in the required places. Signed-off-by: Sergei Gavrikov <sergei.gavrikov@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2011-01-10slirp: fix unaligned access in bootp codeAurelien Jarno1-15/+17
Slirp code tries to be smart an avoid data copy by using pointer to the data. This solution leads to unaligned access, in this case preq_addr, which is a 32-bit long structure. There is no real point of avoiding data copy in a such case, as the value itself is smaller or the same size as a pointer. The patch replaces pointers to the preq_addr structure by the strcture itself, and use the address 0.0.0.0 if no address has been requested (this is not a valid address in such a request). It compares it with htonl(0L) for correctness reasons, in case a code checker look for such mistakes. It also uses memcpy() for copying the data, which takes care of alignement issues. This fixes an unaligned access on IA64 host while requesting a DHCP address. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-11-21slirp: Remove unused code for bad sprintfStefan Weil3-62/+0
Neither DECLARE_SPRINTF nor BAD_SPRINTF are needed for QEMU. QEMU won't support systems with missing or bad declarations for sprintf. The unused code was detected while looking for functions with missing format checking. Instead of adding GCC_FMT_ATTR, the unused code was removed. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-03Use GCC_FMT_ATTR (format checking)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03slirp: Silence warning on HaikuAndreas Färber1-1/+3
Haiku has O_BINARY in fcntl.h. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Cc: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-17Make ARP replies at least 64 bytes longHervé Poussineau1-1/+2
IEEE 802.3 standard requires Ethernet frames to be at least 64 bytes long. If it is not the case, they will be considered as runt frames, and may be ignored by netcard and/or OS Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-09-17Accept packets with TTL=1Hervé Poussineau1-1/+1
Packets with TTL=1 may be directed to local network (DHCP/DNS servers for example), so don't discard them This is required by old versions of NetBSD which send DHCP DISCOVER packets with TTL=1 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-09-04Change DPRINTF() to do{}while(0) to avoid compiler warningJes Sorensen1-1/+1
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-25slirp: Remove declarations which are no longer neededStefan Weil1-33/+0
The previous patches replaced u_int8_t, u_int16_t, u_int32_t, u_int64_t by standard int types from stdint.h, so we can now remove their declarations which are no longer needed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-25slirp: Replace u_int8_t, u_int16_t, u_int32_t, u_int64_t by standard int typesStefan Weil20-116/+110
There is no need to have a second set of integral types. Replace them by the standard types from stdint.h. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-06savevm: Add DeviceState paramAlex Williamson1-2/+3
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-25Remove dead assignments in various common files, spotted by clang analyzerBlue Swirl1-1/+0
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-20slirp: fix structure initialization in tcp_listen()Juha Riihimäki1-0/+1
A data structure of type sockaddr_in is allocated from stack but not properly initialized. This may lead to a failure in the bind() call later on. Fixed by filling the contents of the structure with zeroes before using it. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18slirp: fix unused return value, spotted by clangBlue Swirl1-1/+2
Fix clang errors like: CC slirp/cksum.o /src/qemu/slirp/cksum.c:78:3: error: expression result unused [-Wunused-value] REDUCE; /src/qemu/slirp/cksum.c:45:66: note: instantiated from: Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16monitor: Separate "default monitor" and "current monitor" cleanlyMarkus Armbruster1-1/+1
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
2010-03-07slirp: remove dead nested assignment, spotted by clangBlue Swirl1-2/+1
Although the value stored to 'r' is used in the enclosing expression, the value is never actually read from 'r'. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07slirp: remove dead initialization, spotted by clangBlue Swirl1-4/+0
Value stored during initialization is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07slirp: remove dead increments, spotted by clangBlue Swirl3-2/+4
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07slirp: remove dead assignments, spotted by clangBlue Swirl2-15/+7
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 01:39:44 +0000