summaryrefslogtreecommitdiff
path: root/hw/fdc.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-29fdc: DIR (Digital Input Register) should return status of current drive...Hervé Poussineau1-7/+3
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: fix seek command, which shouldn't check tracksHervé Poussineau1-3/+6
The seek command just sends step pulses to the drive and doesn't care if there is a medium inserted of if it is banging the head against the drive. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: check if media rate is correct before doing any transferHervé Poussineau1-3/+50
The programmed rate has to be the same as the required rate for the floppy format ; if that's not the case, the transfer should abort. This check can be disabled by using the 'check_media_rate' property. Save media rate value only if media rate check is enabled. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: add a 'check media rate' property. Not used yetHervé Poussineau1-0/+3
Set it to true for current Qemu versions, and false for previous ones Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29block: add a transfer rate for floppy typesHervé Poussineau1-1/+2
Floppies must be read at a specific transfer rate, depending of its own format. Update floppy description table to include required transfer rate. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: add CCR (Configuration Control Register) write registerHervé Poussineau1-0/+22
DIR and CCR registers share the same address ; DIR is read-only while CCR is write-only CCR register is used to change media transfer rate, which will be checked in following changes. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: handle read-only floppies (abort early on write commands)Hervé Poussineau1-0/+11
A real floppy doesn't attempt to write to read-only media either. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: most control commands do not generate interruptsHervé Poussineau1-6/+6
In fact, only three control commands generate an interrupt: read_id, recalibrate and seek Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: set busy bit when starting a commandHervé Poussineau1-1/+1
This bit must be active while a command is currently executed. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-29fdc: take side count into accountHervé Poussineau1-6/+11
Floppies can be simple or double-sided. However, current code was only taking the common case into account (ie 2 sides). This repairs single-sided floppies, which where totally broken before this patch : for track > 0, wrong sector number was calculated, and data was read/written at wrong place on underlying device. Fortunately, only some 360 kB floppies are single-sided, so this bug was probably not seen much. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber1-2/+2
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-34/+42
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori1-21/+39
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27isa: pic: convert to QEMU Object ModelAnthony Liguori1-9/+15
This converts two devices at once because PIC subclasses ISA and converting subclasses independently is extremely hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06Convert source files to UTF-8 encodingStefan Weil1-1/+1
Most QEMU files either are pure ASCII or use UTF-8. Convert some files which still used ISO-8859-1 to UTF-8. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-28sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()Avi Kivity1-2/+2
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-24fdc: convert to memory APIAvi Kivity1-34/+24
FIXME: instance ID for migration Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-21pc: Fix floppy drives with if=noneKevin Wolf1-0/+12
Commit 63ffb564 broke floppy devices specified on the command line like -drive file=...,if=none,id=floppy -global isa-fdc.driveA=floppy because it relies on drive_get() which works only with -fda/-drive if=floppy. This patch resembles what we're already doing for IDE, i.e. remember the floppy device that was created and use that to extract the BlockDriverStates where needed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-10-21fdc: Fix floppy port I/OKevin Wolf1-0/+2
The floppy device was broken by commit 212ec7ba (fdc: Convert to isa_register_portio_list). While the old interface provided the port number relative to the floppy drive's io_base, the new one provides the real port number, so we need to apply a bitmask now to get the register number. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11fdc: Convert to isa_register_portio_listRichard Henderson1-30/+4
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-25fdc: Convert isabus_fdc_init1 to MemoryRegionRichard Henderson1-20/+33
This requires some amount of hoop-jumping, so that we don't inadvertently claim port 0x3f6, which is used by ISA IDE. The sysbus initialization path is as yet unconverted. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-12block: New change_media_cb() parameter loadMarkus Armbruster1-1/+1
To let device models distinguish between eject and load. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster1-1/+0
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop BlockDriverState member removableMarkus Armbruster1-1/+0
It's a confused mess (see previous commit). No users remain. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06fdc: Make media change detection more robustMarkus Armbruster1-4/+8
fdctrl_change_cb() gets called on a virtual media change via monitor. It would be nice if host device block drivers called it on physical media change, but they don't. bdrv_media_changed() lets you poll for media change, but it returns "don't know" except with block driver "host_floppy". FDrive member media_changed gets set on device initialization and by fdctrl_change_cb(), and cleared by fdctrl_media_changed(). Thus, it's set on first entry to fdctrl_media_changed() since device initialization or virtual media change. fdctrl_media_changed() ignores media_changed unless bdrv_media_changed() returns "don't know". If we change media via monitor (setting media_changed), and the new media's block driver returns 0, we lose. Fortunately, "host_floppy" always returns 1 on first call. Brittle. Clean it up not to rely on it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06block: Leave tracking media change to device modelsMarkus Armbruster1-22/+18
hw/fdc.c is the only one that cares. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-21fdc: avoid structure holes spotted by paholeBlue Swirl1-9/+9
Edited report from pahole on amd64 host: struct FDCtrl { uint8_t version; /* 0 1 */ /* XXX 7 bytes hole, try to pack */ qemu_irq irq; /* 8 8 */ int dma_chann; /* 16 4 */ /* XXX 4 bytes hole, try to pack */ ... uint8_t status2; /* 42 1 */ /* XXX 5 bytes hole, try to pack */ uint8_t * fifo; /* 48 8 */ ... uint8_t pwrd; /* 76 1 */ /* XXX 3 bytes hole, try to pack */ int sun4m; /* 80 4 */ uint8_t num_floppies; /* 84 1 */ /* XXX 3 bytes hole, try to pack */ FDrive drives[2]; /* 88 64 */ /* --- cacheline 2 boundary (128 bytes) was 24 bytes ago --- */ int reset_sensei; /* 152 4 */ /* size: 160, cachelines: 3 */ /* sum members: 134, holes: 5, sum holes: 22 */ /* padding: 4 */ /* last cacheline: 32 bytes */ }; /* definitions: 1 */ Fix by rearranging the structure to avoid padding. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-07floppy: save and restore DIR registerJason Wang1-1/+50
We need to keep DIR register unchanged across migration, but currently it depends on the media_changed flags from block layer. Since we do not save/restore it and the bdrv_open() called in dest node may set the media_changed flag when trying to open floppy image, guest driver may think the floppy have changed after migration. To fix this, a new filed media_changed in FDrive strcutre was introduced in order to save and restore the it from block layer through pre_save/post_load callbacks. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini1-2/+2
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-02-20fdc: refactor device creationBlue Swirl1-31/+6
Turn fdc_init_isa into an inline function. Get floppy geometry directly from the drives. Don't expose FDCtrl. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20fdc: use FDriveType for floppy drive typeBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20fdc: move floppy geometry guessing to block.cBlue Swirl1-108/+6
Other geometry guessing functions already reside in block.c. Remove some unused or debugging only fields. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov1-0/+8
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Keep track of ISA ports ISA device is using in qdev.Gleb Natapov1-0/+3
Store all io ports used by device in ISADevice structure. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Introduce fw_name field to DeviceInfo structure.Gleb Natapov1-0/+1
Add "fw_name" to DeviceInfo to use in device path building. In contrast to "name" "fw_name" should refer to functionality device provides instead of particular device model like "name" does. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf1-2/+4
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-24Rearrange block headersBlue Swirl1-0/+1
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06fdc: Reject unimplemented error actionsMarkus Armbruster1-6/+16
drive_init() doesn't permit them for if=floppy, but that's worthless: we get them via if=none and -global. This can make device initialization fail. Since all callers of fdctrl_init_isa() ignore its value, change it to die instead of returning failure. Without this, some callers would ignore the failure, and others would crash. Wart: unlike drive_init(), we don't reject the default action when it's explicitly specified. That's because we can't distinguish "no rerror option" from "rerror=report", or "no werror" from "rerror=enospc". Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02block: Fix virtual media change for if=noneMarkus Armbruster1-2/+8
BlockDriverState member removable controls whether virtual media change (monitor commands change, eject) is allowed. It is set when the "type hint" is BDRV_TYPE_CDROM or BDRV_TYPE_FLOPPY. The type hint is only set by drive_init(). It sets BDRV_TYPE_FLOPPY for if=floppy. It sets BDRV_TYPE_CDROM for media=cdrom and if=ide, scsi, xen, or none. if=ide and if=scsi work, because the type hint makes it a CD-ROM. if=xen likewise, I think. For the same reason, if=none works when it's used by ide-drive or scsi-disk. For other guest devices, there are problems: * fdc: you can't change virtual media $ qemu [...] -drive if=none,id=foo,... -global isa-fdc.driveA=foo QEMU 0.12.50 monitor - type 'help' for more information (qemu) eject foo Device 'foo' is not removable unless you add media=cdrom, but that makes it readonly. * virtio: if you add media=cdrom, you can change virtual media. If you eject, the guest gets I/O errors. If you change, the guest sees the drive's contents suddenly change. * scsi-generic: if you add media=cdrom, you can change virtual media. I didn't test what that does to the guest or the physical device, but it can't be pretty. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02block: Catch attempt to attach multiple devices to a blockdevMarkus Armbruster1-5/+5
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo happily creates two SCSI disks connected to the same block device. It's all downhill from there. Device usb-storage deliberately attaches twice to the same blockdev, which fails with the fix in place. Detach before the second attach there. Also catch attempt to delete while a guest device model is attached. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster1-12/+10
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-15Correct definitions for FD_CMD_SAVE and FD_CMD_RESTOREJes Sorensen1-2/+2
Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE in hw/fdc.c Per https://bugs.launchpad.net/qemu/+bug/424453 the correct values for FD_CMD_SAVE is 0x2e and FD_CMD_RESTORE is 0x4e. Verified against the Intel 82078 manual which can be found at: http://wiki.qemu.org/Documentation/HardwareManuals page 22. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster1-1/+0
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-15fdc: Register vmstate via qdevJan Kiszka1-5/+30
Establish vmstate containers for ISA and sysbus variant, define the iobase as instance ID alias, and let qdev do the vmstate registration work. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18Fix harmless if statements with empty body, spotted by clangBlue Swirl1-1/+2
These clang errors are harmless but worth fixing: CC libhw64/fdc.o /src/qemu/hw/fdc.c:998:74: error: if statement has empty body [-Wempty-body] FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval); CC libhw64/cuda.o /src/qemu/hw/cuda.c:320:66: error: if statement has empty body [-Wempty-body] CUDA_DPRINTF("read: reg=0x%x val=%02x\n", (int)addr, val); Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Fix a typoBlue Swirl1-1/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-13fdc: fix drive property handling.Gerd Hoffmann1-5/+15
Fix the floppy controller init wrappers to set the drive properties only in case the DriveInfo pointers passed in are non NULL. This allows to set the properties using -global. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-07fdc: don't use reserved _ prefixBlue Swirl1-6/+6
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-07fdc: don't use reserved _t suffixBlue Swirl1-182/+181
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-18fdc: fix migration from 0.11Juan Quintela1-7/+5
0.11 uses as instance ide io_base, get it back Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 14:03:39 +0000