summaryrefslogtreecommitdiff
path: root/docs
AgeCommit message (Collapse)AuthorFilesLines
2012-11-19Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori1-9/+4
* stefanha/tracing: trace: Remove "info trace" from documents trace: document '-' syntax for disabling events trace: allow disabling events in events file Avoid all systemtap reserved words Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-16trace: Remove "info trace" from documentsLiming Wang1-9/+0
commit 88affa1c monitor: remove unused do_info_trace has removed "info trace" function from monitor, so remove it from documents. Signed-off-by: Liming Wang <walimisdev@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-16trace: document '-' syntax for disabling eventsStefan Hajnoczi1-0/+4
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-16vga: fix bochs alignment issueGerd Hoffmann1-1/+2
The bochs dispi interface traditionally uses port 0x1ce as 16bit index register and port 0x1cf as 16bit data register. The later is unaligned, and probably for that reason the the data register was moved to 0x1d0 for non-x86 archs. This patch makes the data register available at 0x1d0 on x86 too. The old x86 location is kept for compatibility reasons, so both 0x1cf and 0x1d0 can be used as data register on x86. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-10-22serial: add pci-serial documentationGerd Hoffmann1-0/+34
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-22serial: add windows inf file for the pci card to docsGerd Hoffmann1-0/+109
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-20vga: add specs for standard vgaGerd Hoffmann1-0/+64
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-14Spelling fixes in comments and documentationStefan Weil2-3/+3
These wrong spellings were detected by codespell: * successully -> successfully * alot -> a lot * wanna -> want to * infomation -> information * occured -> occurred ["also is" -> "is also" and "ressources" -> "resources" suggested by Peter Maydell <peter.maydell@linaro.org>] Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-15docs: Fix spelling (propery -> property)Stefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-13Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori1-20/+27
* qmp/queue/qmp: (48 commits) target-ppc: add implementation of query-cpu-definitions (v2) target-i386: add implementation of query-cpu-definitions (v2) qapi: add query-cpu-definitions command (v2) compiler: add macro for GCC weak symbols qapi: add query-machines command qapi: mark QOM commands stable qmp: introduce device-list-properties command qmp: add SUSPEND_DISK event qmp: qmp-events.txt: add missing doc for the SUSPEND event qmp: qmp-events.txt: put events in alphabetical order qmp: emit the WAKEUP event when the guest is put to run qmp: don't emit the RESET event on wakeup from S3 scripts: qapi-commands.py: qmp-commands.h: include qdict.h docs: writing-qmp-commands.txt: update error section error, qerror: drop QDict member qerror: drop qerror_table and qerror_format() error, qerror: pass desc string to error calls error: drop error_get_qobject()/error_set_qobject() qemu-ga: switch to the new error format on the wire qmp: switch to the new error format on the wire ...
2012-08-13docs: writing-qmp-commands.txt: update error sectionLuiz Capitulino1-20/+27
Add information about the new error format and improve the text a bit. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-08Add XBZRLE documentationOrit Wasserman1-0/+128
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-06docs: add lazy refcounts bit to qcow2 specificationStefan Hajnoczi1-1/+6
The lazy refcounts bit indicates that this image can take advantage of the dirty bit and that refcount updates can be postponed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06docs: add dirty bit to qcow2 specificationStefan Hajnoczi1-1/+6
The dirty bit will make it possible to perform lazy refcount updates, where the image file is not kept consistent all the time. Upon opening a dirty image file, it is necessary to perform a consistency check and repair any incorrect refcounts. Therefore the dirty bit must be an incompatible feature bit. We don't want old programs accessing a file with stale refcounts. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-23Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori1-0/+2
* stefanha/net: remove unused QemuOpts parameter from net init functions convert net_init_bridge() to NetClientOptions convert net_init_tap() to NetClientOptions convert net_init_vde() to NetClientOptions convert net_init_socket() to NetClientOptions convert net_init_slirp() to NetClientOptions convert net_init_dump() to NetClientOptions convert net_init_nic() to NetClientOptions convert net_client_init() to OptsVisitor hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated) qapi schema: add Netdev types qapi schema: remove trailing whitespace qapi: introduce OptsVisitor expose QemuOpt and QemuOpts struct definitions to interested parties qapi: introduce "size" type qapi: generate C types for fixed-width integers qapi: add test case for deallocating traversal of incomplete structure qapi: fix error propagation MAINTAINERS: Replace net maintainer Mark McLoughlin with Stefan Hajnoczi
2012-07-23qapi: fix error propagationPaolo Bonzini1-0/+2
Don't overwrite / leak previously set errors. Make traversal cope with missing mandatory sub-structs. Don't try to end a container that could not be started. v1->v2: - unchanged v2->v3: - instead of examining, assert that we never overwrite errors with error_set() - allow visitors to set a NULL struct pointer successfully, so traversal of incomplete objects can continue - check for a NULL "obj" before accessing "(*obj)->has_XXX" (this is not a typo, "obj != NULL" implies "*obj != NULL" here) - fix start_struct / end_struct balance for unions as well Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-21Fix some more Qemus in documentation and help textStefan Weil1-1/+1
Hopefully they will be eliminated one day. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-12usb: add usb attached scsi emulationGerd Hoffmann1-0/+38
$subject says all. First cut. It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only transport) compatibility. If your guest can't handle it use usb-storage instead. The emulation works like any other scsi hba emulation (eps, lsi, virtio, megasas, ...). It provides just the HBA where you can attach scsi devices as you like using '-device'. A single scsi target with up to 256 luns is supported. For now only usb 2.0 transport is supported. This will change in the future though as I plan to use this as playground when codeing up & testing usb 3.0 transport and streams support in the qemu usb core and the xhci emulation. No migration support yet. I'm planning to add usb 3.0 support first as this probably requires saving additional state. Special thanks go to Paolo for bringing the qemu scsi emulation into shape, so this can be added nicely without having to touch a single line of scsi code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-24spapr: Add "memop" hypercallBenjamin Herrenschmidt1-0/+78
This adds a qemu-specific hypervisor call to the pseries machine which allows to do what amounts to memmove, memcpy and xor over regions of physical memory such as the framebuffer. This is the simplest way to get usable framebuffer speed from SLOF since the framebuffer isn't mapped in the VRMA and so would otherwise require an hcall per 8 bytes access. The performance is still not great but usable, and can be improved with a more complex implementation of the hcall itself if needed. This also adds some documentation for the qemu-specific hypercalls that we add to PAPR along with a new qemu,hypertas-functions property that mirrors ibm,hypertas-functions and provides some discoverability for the new calls. Note: I chose note to advertise H_RTAS to the guest via that mechanism. This is done on purpose, the guest uses the normal RTAS interfaces provided by qemu (including SLOF) which internally calls H_RTAS. We might in the future implement part (or even all) of RTAS inside the guest like IBM's firmware does and replace H_RTAS with some finer grained set of private hypercalls. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-05-30xhci: add usage info to docsGerd Hoffmann1-0/+15
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-02docs: fix one issue in qcow2 specsZhi Yong Wu1-1/+1
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-20Specification for qcow2 version 3Kevin Wolf1-23/+99
This updates the qcow2 specification to cover version 3. It contains the following changes: - Added compatible/incompatible/auto-clear feature bits plus an optional feature name table to allow useful error messages even if an older version doesn't know some feature at all. - Configurable refcount width. If you don't want to use internal snapshots, make refcounts one bit and save cache space and I/O. - Zero cluster flags. This allows discard even with a backing file that doesn't contain zeros. It is also useful for copy-on-read/image streaming, as you'll want to keep sparseness without accessing the remote image for an unallocated cluster all the time. - Fixed internal snapshot metadata to use 64 bit VM state size. You can't save a snapshot of a VM with >= 4 GB RAM today. - Extended internal snapshot metadata to contain the disk size, so that resizing images that have snapshots can be allowed in the future. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-15acpi_piix4: Re-define PCI hotplug eject register readAlex Williamson1-2/+10
The PCI hotplug eject register has always returned 0, so let's redefine it as a hotplug feature register. The existing model of using separate up & down read-only registers and an eject via write to this register becomes the base implementation. As we make use of new interfaces we'll set bits here to allow the BIOS and AML implementation to optimize for the platform implementation. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15acpi_piix4: Remove PCI_RMV_BASE write codeAlex Williamson1-1/+1
Clarify this register as read-only and remove write code. No change in existing behavior. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15acpi_piix4: Disallow write to up/down PCI hotplug registersAlex Williamson1-2/+2
The write side of these registers is never used and actually can't be used as defined because any read/modify/write sequence from the guest potentially races with qemu. Drop the write support and define these as read-only registers. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-07Replace Qemu by QEMU in internal documentationStefan Weil2-2/+2
The official spelling is QEMU. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-27qapi: untangle next_listPaolo Bonzini1-2/+2
Right now, the semantics of next_list are complicated. The caller must: * call start_list * call next_list for each element *including the first* * on the first call to next_list, the second argument should point to NULL and the result is the head of the list. On subsequent calls, the second argument should point to the last node (last result of next_list) and next_list itself tacks the element at the tail of the list. This works for both input and output visitor, but having the visitor write memory when it is only reading the list is ugly. Plus, relying on *list to detect the first call is tricky and undocumented. We can initialize so->entry in next_list instead of start_list, leaving it NULL in start_list. This way next_list sees clearly whether it is on the first call---as a bonus, it discriminates the cases based on internal state of the visitor rather than external state. We can also pull the assignment of the list head from generated code up to next_list. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-19Merge remote-tracking branch 'sstabellini/saverestore-8' into stagingAnthony Liguori1-0/+34
* sstabellini/saverestore-8: xen: do not allocate RAM during INMIGRATE runstate xen mapcache: check if memory region has moved. xen: record physmap changes to xenstore Set runstate to INMIGRATE earlier Introduce "xen-save-devices-state" cirrus_vga: do not reset videoram Conflicts: qapi-schema.json Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-19Introduce "xen-save-devices-state"Stefano Stabellini1-0/+34
- add an "is_ram" flag to SaveStateEntry; - register_savevm_live sets is_ram for live_savevm devices; - introduce a "xen-save-devices-state" QAPI command that can be used to save the state of all devices, but not the RAM or the block devices of the VM. Changes in v8: - rename save-devices-state to xen-save-devices-state. Changes in v7: - rename save_devices to save-devices-state. Changes in v6: - remove the is_ram parameter from register_savevm_live and sets is_ram if the device is a live_savevm device; - introduce save_devices as a QAPI command, write a better description for it; - fix CODING_STYLE; - introduce a new doc to explain the save format used by save_devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-12docs: correct ./configure line in tracing.txtJun Koi1-1/+1
This patch corrects the configure's trace option in docs/tracing.txt. Signed-off-by: Jun Koi <junkoi2004@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-12trace: Provide a per-event status define for conditional compilationLluís Vilanova1-6/+40
Adds a 'TRACE_${NAME}_ENABLED' preprocessor define for each tracing event in "trace.h". This lets the user conditionally compile code with a relatively high execution cost that is only necessary when producing the tracing information for an event that is enabled. Note that events using this define will probably have the "disable" property by default, in order to avoid such costs on regular builds. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-08libcacard: Spelling and grammar fixes in documentationStefan Weil1-13/+13
* it's -> its * it's -> it is (that's no fix, but makes future checks easier) * this functions -> this function * replacable -> replaceable * reader's -> readers * logins into -> logs into v2: Also replace 'aid' by 'AID' (thanks to Peter Maydell for this hint). v3: Fix sentence (contributed by Alon Levy / Robert Relyea). Cc: Alon Levy <alevy@redhat.com> Cc: Robert Relyea <rrelyea@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-26docs: describe live block operationsMarcelo Tosatti1-0/+58
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-13Spelling fixes in comments and documentationStefan Weil1-1/+1
Codespell detected these new spelling issues. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19Merge remote-tracking branch 'qemu-kvm/memory/mutators' into stagingAnthony Liguori1-0/+12
Conflicts: memory.h
2011-12-15qcow2: Allow >4 GB VM stateKevin Wolf1-1/+7
This is a compatible extension to the snapshot header format that allows saving a 64 bit VM state size. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-14Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori1-3/+3
2011-12-07docs: document memory API interaction with migrationAvi Kivity1-0/+12
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-06docs: Add writing-qmp-commands.txtLuiz Capitulino1-0/+642
Explains how to write QMP commands using the QAPI. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06memory: minor documentation fixes/enhancementsAdemar de Souza Reis Jr1-3/+3
Fix typos and minor documentation errors in both memory.h and docs/memory.txt. Also add missing documentation formatting tags to transaction functions. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Ademar de Souza Reis Jr <areis@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-17Fixing some spelling in docs/libcacard.txtMatthias Brugger1-6/+6
Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-17Fix some spelling bugs in documentation and commentsStefan Weil2-4/+4
These errors were detected by codespell: remaing -> remaining soley -> solely virutal -> virtual seperate -> separate libcacard.txt still needs some more patches. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-17Fix spelling in documentation and comments (similiar -> similar)Stefan Weil1-1/+1
This bug was detected by codespell. In mips_mipssim.c a grammatical error was fixed, too. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori1-1/+8
2011-11-01trace: Add wildcard trace event supportMark Wu1-1/+8
A basic wildcard matching is supported in both the monitor command "trace-event" and the events list file. That means you can enable/disable the events having a common prefix in a batch. For example, virtio-blk trace events could be enabled using: trace-event virtio_blk_* on Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01qapi: fix typos in documentation JSON examplesStefan Hajnoczi1-2/+2
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-28qcow2: fix some errors and typo in qcow2.txtZhi Yong Wu1-3/+3
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21trace: Update docs to use example events that existLluís Vilanova1-7/+9
The events 'qemu_malloc' and 'qemu_free' used in the examples no longer exist, so use 'qemu_vmalloc' and 'qemu_vfree' instead. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21trace: allow trace events with string argumentsStefan Hajnoczi1-5/+3
String arguments are useful for producing human-readable traces without post-processing (e.g. stderr backend). Although the simple backend cannot handles strings all others can. Strings should be allowed and the simple backend can be extended to support them. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-17trace: allow PRI*64 at beginning and ending of format stringStefan Hajnoczi1-4/+1
The tracetool parser only picks up PRI*64 and other format string macros when enclosed between double quoted strings. Lift this restriction by extracting everything after the closing ')' as the format string: cpu_set_apic_base(uint64_t val) "%016"PRIx64 ^^ ^^ One trick here: it turns out that backslashes in the format string like "\n" were being interpreted by echo(1). Fix this by using the POSIX printf(1) command instead. Although it normally does not make sense to include backslashes in trace event format strings, an injected newline causes tracetool to emit a broken header file and I want to eliminate cases where broken output is emitted, even if the input was bad. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 11:15:31 +0000