summaryrefslogtreecommitdiff
path: root/block/qed.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-26qed: Remove callback from qed_find_cluster()Kevin Wolf1-13/+11
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-26qed: Use bottom half to resume waiting requestsKevin Wolf1-3/+10
The qed driver serialises allocating write requests. When the active allocation is finished, the AIO callback is called, but after this, the next allocating request is immediately processed instead of leaving the coroutine. Resuming another allocation request in the same request coroutine means that the request now runs in the wrong coroutine. The following is one of the possible effects of this: The completed request will generally reenter its request coroutine in a bottom half, expecting that it completes the request in bdrv_driver_pwritev(). However, if the second request actually yielded before leaving the coroutine, the reused request coroutine is in an entirely different place and is reentered prematurely. Not a good idea. Let's make sure that we exit the coroutine after completing the first request by resuming the next allocating request only with a bottom half. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18migration: migration.h was not neededJuan Quintela1-1/+0
This files don't use any function from migration.h, so drop it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-04-28block: Add .bdrv_truncate() error messagesMax Reitz1-1/+3
Add missing error messages for the block driver implementations of .bdrv_truncate(); drop the generic one from block.c's bdrv_truncate(). Since one of these changes touches a mis-indented block in block/file-posix.c, this patch fixes that coding style issue along the way. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-5-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to BD.bdrv_truncate()Max Reitz1-1/+1
Add an Error parameter to the block drivers' bdrv_truncate() interface. If a block driver does not set this in case of an error, the generic bdrv_truncate() implementation will do so. Where it is obvious, this patch also makes some block drivers set this value. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-4-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28block: Add errp to b{lk,drv}_truncate()Max Reitz1-1/+1
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Add BDRV_O_RESIZE for blk_new_open()Kevin Wolf1-1/+2
blk_new_open() is a convenience function that processes flags rather than QDict options as a simple way to just open an image file. In order to keep it convenient in the future, it must automatically request the necessary permissions. This can easily be inferred from the flags for read and write, but we need another flag that tells us whether to get the resize permission. We can't just always request it because that means that no block jobs can run on the resulting BlockBackend (which is something that e.g. qemu-img commit wants to do), but we also can't request it never because most of the .bdrv_create() implementations call blk_truncate(). The solution is to introduce another flag that is passed by all users that want to resize the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-28block: Request child permissions in format driversKevin Wolf1-0/+1
This makes use of the .bdrv_child_perm() implementation for formats that we just added. All format drivers expose the permissions they actually need nows, so that they can be set accordingly and updated when parents are attached or detached. The only format not included here is raw, which was already converted with the other filter drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com>
2017-02-24block: Attach bs->file only during .bdrv_open()Kevin Wolf1-3/+15
The way that attaching bs->file worked was a bit unusual in that it was the only child that would be attached to a node which is not opened yet. Because of this, the block layer couldn't know yet which permissions the driver would eventually need. This patch moves the point where bs->file is attached to the beginning of the individual .bdrv_open() implementations, so drivers already know what they are going to do with the child. This is also more consistent with how driver-specific children work. For a moment, bdrv_open() gets its own BdrvChild to perform image probing, but instead of directly assigning this BdrvChild to the BDS, it becomes a temporary one and the node name is passed as an option to the drivers, so that they can simply use bdrv_open_child() to create another reference for their own use. This duplicated child for (the not opened yet) bs is not the final state, a follow-up patch will change the image probing code to use a BlockBackend, which is completely independent of bs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-21block: explicitly acquire aiocontext in aio callbacks that need itPaolo Bonzini1-2/+2
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-16-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in bottom halves that need itPaolo Bonzini1-0/+3
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-15-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21block: explicitly acquire aiocontext in timers that need itPaolo Bonzini1-0/+12
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-13-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21qed: introduce qed_aio_start_io and qed_aio_next_io_cbPaolo Bonzini1-14/+25
qed_aio_start_io and qed_aio_next_io will not have to acquire/release the AioContext, while qed_aio_next_io_cb will. Split the functionality and gain a little type-safety in the process. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-11-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-28qed: Implement .bdrv_drainFam Zheng1-1/+15
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the image header after a grace period once metadata update has finished. To comply with the bdrv_drain semantics, we should make sure it remains deleted once .bdrv_drain is called. The change to qed_need_check_timer_cb is needed because bdrv_qed_drain is called after s->bs has been drained, and should not operate on it; instead it should operate on the BdrvChild-ren exclusively. Doing so is easy because QED does not have a bdrv_co_flush_to_os callback, hence all that is needed to flush it is to ensure writes have reached the disk. Based on commit df9a681dc9a (which however included some unrelated hunks, possibly due to a merge failure or an overlooked squash). The patch was reverted because at the time bdrv_qed_drain could call qed_plug_allocating_write_reqs while an allocating write was queued. This however is not possible anymore after the previous patch; .bdrv_drain is only called after all writes have completed at the QED level, and its purpose is to trigger metadata writes in bs->file. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-7-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-07block: use aio_bh_schedule_oneshotPaolo Bonzini1-4/+2
This simplifies bottom half handlers by removing calls to qemu_bh_delete and thus removing the need to stash the bottom half pointer in the opaque datum. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13coroutine: move entry argument to qemu_coroutine_createPaolo Bonzini1-2/+2
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-05block: Convert bdrv_pwrite(v/_sync) to BdrvChildKevin Wolf1-2/+2
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_pread(v) to BdrvChildKevin Wolf1-3/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_aio_writev() to BdrvChildKevin Wolf1-3/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-05block: Convert bdrv_aio_readv() to BdrvChildKevin Wolf1-3/+3
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-08qed: Convert to bdrv_co_pwrite_zeroes()Eric Blake1-18/+15
Another step on our continuing quest to switch to byte-based interfaces. Kill an abuse of the comma operator while at it (fortunately, the semantics were still right). Also, the test for requests not aligned to clusters should be applied always, not just when a backing file is present. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-08block: Track write zero limits in bytesEric Blake1-1/+1
Another step towards removing sector-based interfaces: convert the maximum write and minimum alignment values from sectors to bytes. Rename the variables to let the compiler check that all users are converted to the new semantics. The maximum remains an int as long as BDRV_REQUEST_MAX_SECTORS is constrained by INT_MAX (this means that we can't even support a 2G write_zeroes, but just under it) - changing operation lengths to unsigned or to 64-bits is a much bigger audit, and debatable if we even want to do it (since at the core, a 32-bit platform will still have ssize_t as its underlying limit on write()). Meanwhile, alignment is changed to 'uint32_t', since it makes no sense to have an alignment larger than the maximum write, and less painful to use an unsigned type with well-defined behavior in bit operations than to have to worry about what happens if a driver mistakenly supplies a negative alignment. Add an assert that no one was trying to use sectors to get a write zeroes larger than 2G, and therefore that a later conversion to bytes won't be impacted by keeping the limit at 32 bits. Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-07qed: Use DIV_ROUND_UPLaurent Vivier1-2/+1
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d). This patch is the result of coccinelle script scripts/coccinelle/round.cocci CC: qemu-block@nongnu.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-19qemu-common: stop including qemu/bswap.h from qemu-common.hPaolo Bonzini1-0/+1
Move it to the actual users. There are still a few includes of qemu/bswap.h in headers; removing them is left for future work. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12block: Drop superfluous invalidating bs->file from driversFam Zheng1-6/+0
Now they are invalidated by the block layer, so it's not necessary to do this in block drivers' implementations of .bdrv_invalidate_cache. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-05-12block: Allow BDRV_REQ_FUA through blk_pwrite()Eric Blake1-3/+3
We have several block drivers that understand BDRV_REQ_FUA, and emulate it in the block layer for the rest by a full flush. But without a way to actually request BDRV_REQ_FUA during a pass-through blk_pwrite(), FUA-aware block drivers like NBD are forced to repeat the emulation logic of a full flush regardless of whether the backend they are writing to could do it more efficiently. This patch just wires up a flags argument; followup patches will actually make use of it in the NBD driver and in qemu-io. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Always set writeback mode in blk_new_open()Kevin Wolf1-2/+1
All callers of blk_new_open() either don't rely on the WCE bit set after blk_new_open() because they explicitly set it anyway, or they pass BDRV_O_CACHE_WB unconditionally. This patch changes blk_new_open() so that it always enables writeback mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah1-1/+1
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-17blockdev: Split monitor reference from BB creationMax Reitz1-1/+1
Before this patch, blk_new() automatically assigned a name to the new BlockBackend and considered it referenced by the monitor. This patch removes the implicit monitor_add_blk() call from blk_new() (and consequently the monitor_remove_blk() call from blk_delete(), too) and thus blk_new() (and related functions) no longer take a BB name argument. In fact, there is only a single point where blk_new()/blk_new_open() is called and the new BB is monitor-owned, and that is in blockdev_init(). Besides thus relieving us from having to invent names for all of the BBs we use in qemu-img, this fixes a bug where qemu cannot create a new image if there already is a monitor-owned BB named "image". If a BB and its BDS tree are created in a single operation, as of this patch the BDS tree will be created before the BB is given a name (whereas it was the other way around before). This results in minor change to the output of iotest 087, whose reference output is amended accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17qapi: Drop QERR_UNKNOWN_BLOCK_FORMAT_FEATUREMax Reitz1-5/+2
Just specifying a custom string is simpler in basically all places that used it, and in addition, specifying the BB or node name is something we generally do not do in other error messages when opening a BDS, so we should not do it here. This changes the output for iotest 036 (to the better, in my opinion), so the reference output needs to be changed accordingly. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17Revert "qed: Implement .bdrv_drain"Stefan Hajnoczi1-13/+0
This reverts commit df9a681dc9ad41c9cdeb9ecc5d060ba9abd27e01. Note that commit df9a681dc9ad41c9cdeb9ecc5d060ba9abd27e01 included some unrelated hunks, possibly due to a merge failure or an overlooked squash. This only reverts the qed .bdrv_drain() implementation. The qed .bdrv_drain() implementation is unsafe and can lead to a double request completion. Paolo Bonzini reports: "The problem is that bdrv_qed_drain calls qed_plug_allocating_write_reqs unconditionally, but this is not correct if an allocating write is queued. In this case, qed_unplug_allocating_write_reqs will restart the allocating write and possibly cause it to complete. The aiocb however is still in use for the L2/L1 table writes, and will then be completed again as soon as the table writes are stable." For QEMU 2.6 we can simply revert this commit. A full solution for the qed need check timer may be added if the bdrv_drain() implementation is extended. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1457431876-8475-1-git-send-email-stefanha@redhat.com
2016-03-14qed: Use BB functions in .bdrv_create()Kevin Wolf1-13/+15
All users of the block layers are supposed to go through a BlockBackend. The .bdrv_create() implementation is one such user, so this patch converts it. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02qed: Assign bs->file->bs to file in bdrv_qed_co_get_block_statusFam Zheng1-0/+3
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-8-git-send-email-famz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-02-02block: Add "file" output parameter to block status query functionsFam Zheng1-1/+2
The added parameter can be used to return the BDS pointer which the valid offset is referring to. Its value should be ignored unless BDRV_BLOCK_OFFSET_VALID in ret is set. Until block drivers fill in the right value, let's clear it explicitly right before calling .bdrv_get_block_status. The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest case 102 passing, and will be fixed once all drivers return the right file pointer. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2016-01-20block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVEKevin Wolf1-2/+2
Instead of covering only the state of images on the migration destination before the migration is completed, the flag will also cover the state of images on the migration source after completion. This common state implies that the image is technically still open, but no writes will happen and any cached contents will be reloaded from disk if and when the image leaves this state. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-20block: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-13error: Use error_prepend() where it makes obvious senseMarkus Armbruster1-3/+2
Done with this Coccinelle semantic patch @@ expression FMT, E1, E2; expression list ARGS; @@ - error_setg(E1, FMT, ARGS, error_get_pretty(E2)); + error_propagate(E1, E2);/*###*/ + error_prepend(E1, FMT/*@@@*/, ARGS); followed by manual cleanup, first because I can't figure out how to make Coccinelle transform strings, and second to get rid of now superfluous error_propagate(). We now use or propagate the original error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00), but I can't see how the errors touched in this commit could come with hints. It also improves the message printed with &error_abort when we screw up (see commit 1e9b65b). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-11-12qed: Implement .bdrv_drainFam Zheng1-0/+13
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the image header after a grace period once metadata update has finished. In compliance to the bdrv_drain semantics we should make sure it remains deleted once .bdrv_drain is called. We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy the assertion. Do the "plug" and "flush" calls manually. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-10-16block: Remove bdrv_swap()Kevin Wolf1-7/+0
bdrv_swap() is unused now. Remove it and all functions that have no other users than bdrv_swap(). In particular, this removes the .bdrv_rebind callbacks from block drivers. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->backing_hd to BdrvChildKevin Wolf1-6/+6
This is the final step in converting all of the BlockDriverState pointers that block drivers use to BdrvChild. After this patch, bs->children contains the full list of child nodes that are referenced by a given BDS, and these children are only referenced through BdrvChild, so that updating the pointer in there is enough for changing edges in the graph. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-16block: Convert bs->file to BdrvChildKevin Wolf1-16/+16
This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-14block: Drop drv parameter from bdrv_open()Max Reitz1-1/+1
Now that this parameter is effectively unused, we can drop it and just pass NULL on to bdrv_open_inherit(). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-2/+2
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-04-28block: use bdrv_get_device_or_node_name() in error messagesAlberto Garcia1-1/+1
There are several error messages that identify a BlockDriverState by its device name. However those errors can be produced in nodes that don't have a device name associated. In those cases we should use bdrv_get_device_or_node_name() to fall back to the node name and produce a more meaningful message. The messages are also updated to use the more generic term 'node' instead of 'device'. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28Convert (ffs(val) - 1) to ctz32(val)Stefan Hajnoczi1-2/+2
This commit was generated mechanically by coccinelle from the following semantic patch: @@ expression val; @@ - (ffs(val) - 1) + ctz32(val) The call sites have been audited to ensure the ffs(0) - 1 == -1 case never occurs (due to input validation, asserts, etc). Therefore we don't need to worry about the fact that ctz32(0) == 32. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-02-06qed: check for header size overflowStefan Hajnoczi1-0/+5
Header size is denoted in clusters. The maximum cluster size is 64 MB but there is no limit on header size. Check for uint32_t overflow in case the header size field has a whacky value. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1421065893-18875-2-git-send-email-stefanha@redhat.com Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Rename BlockDriverCompletionFunc to BlockCompletionFuncMarkus Armbruster1-9/+9
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Rename BlockDriverAIOCB* to BlockAIOCB*Markus Armbruster1-16/+16
I'll use BlockDriverAIOCB with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate BlockDriverState member device_name[]Markus Armbruster1-1/+1
device_name[] can become non-empty only in bdrv_new_root() and bdrv_move_feature_fields(). The latter is used only to undo damage done by bdrv_swap(). The former is called only by blk_new_with_bs(). Therefore, when a BlockDriverState's device_name[] is non-empty, then it's been created with a BlockBackend, and vice versa. Furthermore, blk_new_with_bs() keeps the two names equal. Therefore, device_name[] is redundant. Eliminate it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 21:44:00 +0000