summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-06-17tap: add VNET_LE/VNET_BE operationsGreg Kurz6-0/+78
The linux tap and macvtap backends can be told to parse vnet headers according to little or big endian. This is done through the TUNSETVNETLE and TUNSETVNETBE ioctls. This patch brings all the plumbing for QEMU to use these APIs. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17vhost: set vring endianness for legacy virtioGreg Kurz1-1/+49
Legacy virtio is native endian: if the guest and host endianness differ, we have to tell vhost so it can swap bytes where appropriate. This is done through a vhost ring ioctl. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17virtio: introduce virtio_legacy_is_cross_endian()Greg Kurz1-0/+13
This helper will be used by vhost and tap to detect cross-endianness in the legacy virtio case. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-17linux-headers: sync vhost.hGreg Kurz1-0/+14
This patch brings the cross-endian vhost API to QEMU. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-15vhost-user: part of virtioMichael S. Tsirkin1-0/+1
vhost user is related to virtio, add it to the relevant entry. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-11i386/acpi-build: fix PXB workarounds for unsupported BIOSesLaszlo Ersek1-4/+4
The patch apci: fix PXB behaviour if used with unsupported BIOS uses the following condition to see if a "PXB mem/IO chunk" has *not* been configured by the BIOS: (!range_base || range_base > range_limit) When this condition evaluates to true, said patch *omits* the corresponding entry from the _CRS. Later on the patch checks for the opposite condition (with the intent of *adding* entries to the _CRS if the "PXB mem/IO chunks" *have* been configured). Unfortunately, the condition was negated incorrectly: only the first ! operator was removed, which led to the nonsensical expression (range_base || range_base > range_limit) leading to bogus entries in the _CRS, and causing BSOD in Windows Server 2012 R2 when it runs on OVMF. The correct negative of the condition seen at the top is (range_base && range_base <= range_limit) Fix the expressions. Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-11i386/acpi-build: more traditional _UID and _HID for PXB root busesLaszlo Ersek1-3/+2
The ACPI specification permits the _HID and _UID objects to evaluate to strings. (See "6.1.5 _HID (Hardware ID)" and "6.1.12 _UID (Unique ID)" in the ACPI v6.0 spec.) With regard to related standards, the UEFI specification can also express a device address composed from string _HID and _UID identifiers, inside the Expanded ACPI Device Path Node. (See "9.3.3 ACPI Device Path", Table 49, in the UEFI v2.5 spec.) However, numeric (integer) contents for both _HID and _UID are more traditional. They are recommended by the UEFI spec for size reasons: [...] the ACPI Device Path node is smaller and should be used if possible to reduce the size of device paths that may potentially be stored in nonvolatile storage [...] External tools support them better (for example the --acpi_hid and --acpi_uid options of "efibootmgr" only take numeric identifiers). Finally, numeric _HID and _UID contents are existing practice in the QEMU source. This patch was tested with a Fedora 20 LiveCD and a preexistent Windows Server 2012 R2 guest. Using "acpidump" and "iasl" in the Fedora guest, we get, in the SSDT: > Scope (\_SB) > { > Device (PC04) > { > Name (_UID, 0x04) // _UID: Unique ID > Name (_HID, EisaId ("PNP0A03") /* PCI Bus */) // _HID: Hardware ID Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost-scsi: move qdev properties into vhost-scsi.cShannon Zhao2-10/+8
As only one place in vhost-scsi.c uses DEFINE_VHOST_SCSI_PROPERTIES, there is no need to expose it. Inline it into vhost-scsi.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-9p-device: move qdev properties into virtio-9p-device.cShannon Zhao2-5/+2
As only one place in virtio-9p-device.c uses DEFINE_VIRTIO_9P_PROPERTIES, there is no need to expose it. Inline it into virtio-9p-device.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-serial-bus: move qdev properties into virtio-serial-bus.cShannon Zhao2-4/+2
As only one place in virtio-serial-bus.c uses DEFINE_VIRTIO_SERIAL_PROPERTIES, there is no need to expose it. Inline it into virtio-serial-bus.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-rng: move qdev properties into virtio-rng.cShannon Zhao2-11/+7
As only one place in virtio-rng.c uses DEFINE_VIRTIO_RNG_PROPERTIES, there is no need to expose it. Inline it into virtio-rng.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-scsi: move qdev properties into virtio-scsi.cShannon Zhao2-15/+11
As only one place in virtio-scsi.c uses DEFINE_VIRTIO_SCSI_PROPERTIES and DEFINE_VIRTIO_SCSI_FEATURES, there is no need to expose them. Inline them into virtio-scsi.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIESShannon Zhao1-6/+1
Remove unsed DEFINE_VIRTIO_NET_PROPERTIES in virtio-net.h and delete a space typo. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: move qdev properties into virtio-net.cShannon Zhao2-26/+42
As only one place in virtio-net.c uses DEFINE_VIRTIO_NET_FEATURES, there is no need to expose it. Inline it into virtio-net.c to avoid wrongly use. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-input: emulated devices [pci]Gerd Hoffmann2-0/+97
This patch adds virtio-pci support for the emulated virtio-input devices. Using them is as simple as adding "-device virtio-tablet-pci" to your command line. If you want add multiple devices but don't want waste a pci slot for each you can compose a multifunction device this way: qemu -device virtio-keyboard-pci,addr=0d.0,multifunction=on \ -device virtio-tablet-pci,addr=0d.1,multifunction=on Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-input: core code & base class [pci]Gerd Hoffmann2-0/+50
This patch adds the virtio-pci support bits for virtio-input-device. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10pci: add PCI_CLASS_INPUT_*Gerd Hoffmann1-0/+7
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: fill VirtIOPCIRegions early.Gerd Hoffmann2-41/+55
Initialize the modern bar and the VirtIOPCIRegion fields early, in realize. Also add a size field to VirtIOPCIRegion and variables for pci bars to VirtIOPCIProxy. This allows virtio-pci subclasses to change things before the device_plugged callback applies them. virtio-vga will use that to arrange regions in a way that virtio-vga is compatible to both stdvga (in vga mode) and virtio-gpu-pci (in pci mode). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: drop identical virtio_pci_capGerd Hoffmann1-13/+5
Now the three struct virtio_pci_caps are identical, lets drop two of them ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: move cap type to VirtIOPCIRegionGerd Hoffmann2-4/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_mapGerd Hoffmann1-18/+10
Also fill offset and length automatically, from VirtIOPCIRegion->offset and region size. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add virtio_pci_modern_region_map()Gerd Hoffmann2-6/+20
Add function to map modern virtio regions. Add offset to VirtIOPCIRegion. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add virtio_pci_modern_regions_init()Gerd Hoffmann1-58/+59
Add init function for the modern pci regions, move over the init code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add struct VirtIOPCIRegion for virtio-1 regionsGerd Hoffmann2-13/+19
For now just place the MemoryRegion there, following patches will add more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-balloon: switch to virtio_add_featureCornelia Huck1-1/+1
This was missed during the conversion of feature bit manipulation. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio_balloon: header updateMichael S. Tsirkin1-0/+6
add modern header Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: correctly set host notifiers for modern barJason Wang1-6/+25
Currently, during host notifier set. We only add eventfd for legacy bar, this is not correct since: - Non-transitional device does not have legacy bar, so qemu will crash since proxy->bar was not initialized. - Modern device uses modern bar and notify cap to notify the device, we should add eventfd for proxy->notify. So this patch fixes the above two issues by adding eventfd based on whether legacy or modern device were supported. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: make modern bar 64bit + prefetchableGerd Hoffmann1-1/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: change & document virtio pci bar layout.Gerd Hoffmann1-6/+25
This patch adds variables for the pci bars (to get rid of the magic numbers in the code) and moves the modern virtio bar to region 4 so regions 2+3 are kept free. virtio-vga wants use them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: make QEMU_VIRTIO_PCI_QUEUE_MEM_MULT smallerGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: add flags to enable/disable legacy/modernGerd Hoffmann2-13/+39
Add VIRTIO_PCI_FLAG_DISABLE_LEGACY and VIRTIO_PCI_FLAG_DISABLE_MODERN for VirtIOPCIProxy->flags. Also add properties for them. They can be used to disable modern (virtio 1.0) or legacy (virtio 0.9) modes. By default only legacy is advertized, modern will be turned on by default once all remaining spec compilance issues are addressed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: switch to modern accessors for 1.0Michael S. Tsirkin1-6/+6
virtio 1.0 config space is in LE format for all devices, use modern wrappers when accessed through the 1.0 BAR. Reported-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: add modern config accessorsMichael S. Tsirkin2-0/+105
virtio 1.0 defines config space as LE, as opposed to pre-1.0 which was native endian. Add API for transports to execute word/dword accesses in little endian format - will be useful for mmio and pci (byte access is also wrapped, for completeness). For simplicity, we still keep config in host native endian format, byteswap to LE on guest access. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: generation counter supportMichael S. Tsirkin3-1/+3
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-pci: initial virtio 1.0 supportMichael S. Tsirkin2-0/+395
This is somewhat functional. With this, and linux driver from my tree, I was able to use virtio net as virtio 1.0 device for light browsing. At the moment, dataplane and vhost code is still missing. Based on Cornelia's virtio 1.0 patchset: Date: Thu, 11 Dec 2014 14:25:02 +0100 From: Cornelia Huck <cornelia.huck@de.ibm.com> To: virtualization@lists.linux-foundation.org, qemu-devel@nongnu.org Cc: rusty@rustcorp.com.au, thuth@linux.vnet.ibm.com, mst@redhat.com, Cornelia Huck <cornelia.huck@de.ibm.com> Subject: [PATCH RFC v6 00/20] qemu: towards virtio-1 host support Message-Id: <1418304322-7546-1-git-send-email-cornelia.huck@de.ibm.com> which is itself still missing some core bits. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10linux-headers: add virtio_pciMichael S. Tsirkin2-0/+194
Easier than duplicating code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost: 64 bit featuresCornelia Huck4-18/+18
Make sure that all vhost interfaces use 64 bit features, as the virtio core does, and make sure to use ULL everywhere possible to be on the safe side. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost_net: add version_1 featureMichael S. Tsirkin1-0/+2
Add VERSION_1 to list of features that we should test at the backend. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: enable virtio 1.0Cornelia Huck1-0/+1
virtio-net (non-vhost) now should have everything in place to support virtio 1.0: let's enable the feature bit for it. Note that VIRTIO_F_VERSION_1 is technically a transport feature; once every device is ready for virtio 1.0, we can move setting this feature bit out of the individual devices. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: support longer headerCornelia Huck1-6/+15
virtio-1 devices always use num_buffers in the header, even if mergeable rx buffers have not been negotiated. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio-net: no writeable mac for virtio-1Cornelia Huck1-0/+1
Devices operating as virtio 1.0 may not allow writes to the mac address in config space. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: allow to fail setting statusCornelia Huck3-10/+37
virtio-1 allow setting of the FEATURES_OK status bit to fail if the negotiated feature bits are inconsistent: let's fail virtio_set_status() in that case and update virtio-ccw to post an error to the guest. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: disallow late feature changes for virtio-1Cornelia Huck1-3/+15
For virtio-1 devices, the driver must not attempt to set feature bits after it set FEATURES_OK in the device status. Simply reject it in that case. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10dataplane: allow virtio-1 devicesCornelia Huck1-21/+26
Handle endianness conversion for virtio-1 virtqueues correctly. Note that dataplane now needs to be built per-target. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: allow virtio-1 queue layoutCornelia Huck3-19/+40
For virtio-1 devices, we allow a more complex queue layout that doesn't require descriptor table and rings on a physically-contigous memory area: add virtio_queue_set_rings() to allow transports to set this up. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10virtio: endianness checks for virtio 1.0 devicesCornelia Huck3-3/+15
Add code that checks for the VERSION_1 feature bit in order to make decisions about the device's endianness. This allows us to support transitional devices. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost: put log correctly in vhost_dev_start()Jason Wang1-3/+1
We allocate an dummy log even if the size is zero. So we should put it unconditionally too. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-04vhost: logs sharingJason Wang2-19/+66
Currently we allocate one vhost log per vhost device. This is sub optimal when: - Guest has several device with vhost as backend - Guest has multiqueue devices In the above cases, we can avoid the memory allocation by sharing a single vhost log among all the vhost devices. This is done through: - Introducing a new vhost_log structure with refcnt inside. - Using a global pointer to vhost_log structure that will be used. And introduce helper to get the log with expected log size and helper to - drop the refcnt to the old log. - Each vhost device still keep track of a pointer to the log that was used. With above, if no resize happens, all vhost device will share a single vhost log. During resize, a new vhost_log structure will be allocated and made for the global pointer. And each vhost devices will drop the refcnt to the old log. Tested by doing scp during migration for a 2 queues virtio-net-pci. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-04hw/acpi: piix4_pm_init(): take fw_cfg object no moreLaszlo Ersek4-15/+12
This PIIX4 init function has no more reason to receive a pointer to the FwCfg object. Remove the parameter from the prototype, and update callers. As a result, the pc_init1() function no longer needs to save the return value of pc_memory_init() and xen_load_linux(), which makes it more similar to pc_q35_init(). The return type & value of pc_memory_init() and xen_load_linux() are not changed themselves; maybe we'll need their return values sometime later. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-06-04hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to coreLaszlo Ersek2-8/+12
The acpi_pm1_cnt_init() core function is responsible for setting up the register block that will ultimately react to S3 and S4 requests (see acpi_pm1_cnt_write()). It makes sense to advertise this configuration to the guest firmware via an easy to parse fw_cfg file (ACPI is too complex for firmware to parse), and indeed PIIX4 does that. However, since acpi_pm1_cnt_init() is not specific to PIIX4, neither should be the fw_cfg file. This patch makes "etc/system-states" appear on all chipsets modified in the previous patch, not just PIIX4 (assuming they have fw_cfg at all). RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 07:26:24 +0000