summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-12init/cleanup of netfilter objectYang Hongyang7-0/+229
Add a netfilter object based on QOM. A netfilter is attached to a netdev, captures all network packets that pass through the netdev. When we delete the netdev, we also delete the netfilter object attached to it, because if the netdev is removed, the filter which attached to it is useless. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12vl.c: init delayed object after net_init_clientsYang Hongyang1-7/+8
Init delayed object after net_init_clients, because netfilters need to be initialized after net clients initialized. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12vmxnet3: Add support for VMXNET3_CMD_GET_ADAPTIVE_RING_INFO commandShmulik Ladkani2-1/+14
Some drivers (e.g. vmware-tools) issue the VMXNET3_CMD_GET_ADAPTIVE_RING_INFO command. Currently, due to lack of support, a bogus value (-1) is returned. Support this command, returning the "adaptive-ring disabled" flag. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12e1000: use alias for default modelJason Wang2-7/+2
Instead of duplicating the "e1000-82540em" device model as "e1000", make the latter an alias for the former. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-10-12vmxnet3: Support reading IMR registers on bar0Shmulik Ladkani1-1/+5
Instead of asserting, return the actual IMR register value. This is aligned with what's returned on ESXi. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Tested-by: Dana Rubin <dana.rubin@ravellosystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net/vmxnet3: Refine l2 header validationDana Rubin2-6/+17
Validation of l2 header length assumed minimal packet size as eth_header + 2 * vlan_header regardless of the actual protocol. This caused crash for valid non-IP packets shorter than 22 bytes, as 'tx_pkt->packet_type' hasn't been assigned for such packets, and 'vmxnet3_on_tx_done_update_stats()' expects it to be properly set. Refine header length validation in 'vmxnet_tx_pkt_parse_headers'. Check its return value during packet processing flow. As a side effect, in case IPv4 and IPv6 header validation failure, corrupt packets will be dropped. Signed-off-by: Dana Rubin <dana.rubin@ravellosystems.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-09Merge remote-tracking branch 'remotes/kraxel/tags/pull-virgl-20151008-1' ↵Peter Maydell21-59/+1626
into staging virtio-gpu: add 3d rendering support using virgl, misc fixes. ui/gtk: add opengl context and scanout support (for virtio-gpu). # gpg: Signature made Thu 08 Oct 2015 10:35:39 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-virgl-20151008-1: gtk/opengl: add opengl context and scanout support (GtkGLArea) gtk/opengl: add opengl context and scanout support (egl) opengl: add egl-context.[ch] helpers virtio-gpu: add cursor update tracepoint virtio-gpu: add 3d mode and virgl rendering support. virtio-gpu: update headers for virgl/3d virtio-gpu: change licence from GPLv2 to GPLv2+ virtio-gpu: move iov free to virtio_gpu_cleanup_mapping_iov ui/console: add opengl context and scanout support interfaces. sdl2: stop flickering shaders: initialize vertexes once Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-09Revert "qdev: Use qdev_get_device_class() for -device <type>,help"Markus Armbruster1-3/+6
This reverts commit 31bed5509dfcbdfc293154ce81086a4dbd7a80b6. The reverted commit changed qdev_device_help() to reject abstract devices and devices that have cannot_instantiate_with_device_add_yet set, to fix crash bugs like -device x86_64-cpu,help. Rejecting abstract devices makes sense: they're purely internal, and the implementation of the help feature can't cope with them. Rejecting non-pluggable devices makes less sense: even though you can't use them with -device, the help may still be useful elsewhere, for instance with -global. This is a regression: -device FOO,help used to help even for FOO that aren't pluggable. The previous two commits fixed the crash bug at a lower layer, so reverting this one is now safe. Fixes the -device FOO,help regression, except for the broken devices marked cannot_even_create_with_object_new_yet. For those, the error message is improved. Example of a device where the regression is fixed: $ qemu-system-x86_64 -device PIIX4_PM,help PIIX4_PM.command_serr_enable=bool (on/off) PIIX4_PM.multifunction=bool (on/off) PIIX4_PM.rombar=uint32 PIIX4_PM.romfile=str PIIX4_PM.addr=int32 (Slot and optional function number, example: 06.0 or 06) PIIX4_PM.memory-hotplug-support=bool PIIX4_PM.acpi-pci-hotplug-with-bridge-support=bool PIIX4_PM.s4_val=uint8 PIIX4_PM.disable_s4=uint8 PIIX4_PM.disable_s3=uint8 PIIX4_PM.smb_io_base=uint32 Example of a device where it isn't fixed: $ qemu-system-x86_64 -device host-x86_64-cpu,help Can't list properties of device 'host-x86_64-cpu' Both failed with "Parameter 'driver' expects pluggable device type" before. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1443689999-12182-11-git-send-email-armbru@redhat.com>
2015-10-09qdev: Protect device-list-properties against broken devicesMarkus Armbruster27-27/+185
Several devices don't survive object_unref(object_new(T)): they crash or hang during cleanup, or they leave dangling pointers behind. This breaks at least device-list-properties, because qmp_device_list_properties() needs to create a device to find its properties. Broken in commit f4eb32b "qmp: show QOM properties in device-list-properties", v2.1. Example reproducer: $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}} { "execute": "qmp_capabilities" } {"return": {}} { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } } qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. Aborted (core dumped) [Exit 134 (SIGABRT)] Unfortunately, I can't fix the problems in these devices right now. Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet to mark them: * Hang during cleanup (didn't debug, so I can't say why): "realview_pci", "versatile_pci". * Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic", "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such CPUs * Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu", "host-powerpc64-cpu", "host-embedded-powerpc-cpu", "host-powerpc-cpu" (the powerpc ones can't currently reach the assertion, because the CPUs are only registered when KVM is enabled, but the assertion is arguably in the wrong place all the same) Make qmp_device_list_properties() fail cleanly when the device is so marked. This improves device-list-properties from "crashes, hangs or leaves dangling pointers behind" to "fails". Not a complete fix, just a better-than-nothing work-around. In the above reproducer, device-list-properties now fails with "Can't list properties of device 'pxa2xx-pcmcia'". This also protects -device FOO,help, which uses the same machinery since commit ef52358 "qdev-monitor: include QOM properties in -device FOO, help output", v2.2. Example reproducer: $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help Before: qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. After: Can't list properties of device 'pxa2xx-pcmcia' Cc: "Andreas Färber" <afaerber@suse.de> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Green <green@moxielogic.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Jia Liu <proljc@gmail.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-ppc@nongnu.org Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
2015-10-09qmp: Fix device-list-properties not to crash for abstract deviceMarkus Armbruster2-11/+10
Broken in commit f4eb32b "qmp: show QOM properties in device-list-properties", v2.1. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-Id: <1443689999-12182-9-git-send-email-armbru@redhat.com>
2015-10-09device-introspect-test: New, covering device introspectionMarkus Armbruster2-3/+163
The test doesn't check that the output makes any sense, only that QEMU survives. Useful since we've had an astounding number of crash bugs around there. In fact, we have a bunch of them right now: a few devices crash or hang, and some leave dangling pointers behind. The test skips testing the broken parts. The next commits will fix them up, and drop the skipping. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1443689999-12182-8-git-send-email-armbru@redhat.com>
2015-10-09libqtest: New hmp() & friendsMarkus Armbruster4-22/+78
New convenience function hmp() to facilitate use of human-monitor-command in tests. Use it to simplify its existing uses. To blend into existing libqtest code, also add qtest_hmpv() and qtest_hmp(). That, and the egregiously verbose GTK-Doc comment format make this patch look bigger than it is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1443689999-12182-7-git-send-email-armbru@redhat.com>
2015-10-09libqtest: Clean up unused QTestState member sigact_oldMarkus Armbruster1-1/+0
Unused since commit d766825. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1443689999-12182-6-git-send-email-armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-10-09tests: Fix how qom-test is runMarkus Armbruster1-6/+8
We want to run qom-test for every architecture, without having to manually add it to every architecture's list of tests. Commit 3687d53 accomplished this by adding it to every architecture's list automatically. However, some architectures inherit their tests from others, like this: check-qtest-x86_64-y = $(check-qtest-i386-y) check-qtest-microblazeel-y = $(check-qtest-microblaze-y) check-qtest-xtensaeb-y = $(check-qtest-xtensa-y) For such architectures, we ended up running the (slow!) test twice. Commit 2b8419c attempted to avoid this by adding the test only when it's not already present. Works only as long as we consider adding the test to the architectures on the left hand side *after* the ones on the right hand side: x86_64 after i386, microblazeel after microblaze, xtensaeb after xtensa. Turns out we consider them in $(SYSEMU_TARGET_LIST) order. Defined as SYSEMU_TARGET_LIST := $(subst -softmmu.mak,,$(notdir \ $(wildcard $(SRC_PATH)/default-configs/*-softmmu.mak))) On my machine, this results in the oder xtensa, x86_64, microblazeel, microblaze, i386. Consequently, qom-test runs twice for microblazeel and x86_64. Replace this complex and flawed machinery with a much simpler one: add generic tests (currently just qom-test) to check-qtest-generic-y instead of check-qtest-$(target)-y for every target, then run $(check-qtest-generic-y) for every target. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-Id: <1443689999-12182-5-git-send-email-armbru@redhat.com>
2015-10-09macio: move DBDMA_init from instance_init to realizePaolo Bonzini1-4/+4
DBDMA_init is not idempotent, and calling it from instance_init breaks a simple object_new/object_unref pair. Work around this, pending qdev-ification of DBDMA, by moving the call to realize. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1443689999-12182-4-git-send-email-armbru@redhat.com>
2015-10-09hw: do not pass NULL to memory_region_init from instance_initPaolo Bonzini7-12/+12
This causes the region to outlive the object, because it attaches the region to /machine. This is not nice for the "realize" method, but much worse for "instance_init" because it can cause dangling pointers after a simple object_new/object_unref pair. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1443689999-12182-3-git-send-email-armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-10-09memory: allow destroying a non-empty MemoryRegionPaolo Bonzini1-1/+16
This is legal; the MemoryRegion will simply unreference all the existing subregions and possibly bring them down with it as well. However, it requires a bit of care to avoid an infinite loop. Finalizing a memory region cannot trigger an address space update, but memory_region_del_subregion errs on the side of caution and might trigger a spurious update: avoid that by resetting mr->enabled first. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1443689999-12182-2-git-send-email-armbru@redhat.com>
2015-10-09virtio-input: Fix device introspection on non-Linux hostsMarkus Armbruster3-9/+17
When CONFIG_LINUX is off, devices "virtio-keyboard-device", "virtio-mouse-device", "virtio-tablet-device" and "virtio-input-host-device" aren't compiled in, yet "virtio-keyboard-pci", "virtio-mouse-pci", "virtio-tablet-pci" and "virtio-input-host-pci" still are. Attempts to introspect them crash, e.g. $ qemu-system-x86_64 -device virtio-tablet-pci,help ** ERROR:/work/armbru/qemu/qom/object.c:333:object_initialize_with_type: assertion failed: (type != NULL) Broken in commit 710e2d9 and commit 006a5ed. Fix by compiling the "virtio-FOO-pci" exactly when compiling the "virtio-FOO-device": compile "virtio-keyboard-device", "virtio-mouse-device", "virtio-tablet-device" regardless of CONFIG_LINUX, and compile "virtio-input-host-pci" only for CONFIG_LINUX. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <1444320700-26260-3-git-send-email-armbru@redhat.com>
2015-10-09update-linux-headers: Rename SW_MAX to SW_MAX_Markus Armbruster2-2/+3
The next commit will compile hw/input/virtio-input.c and hw/input/virtio-input-hid.c even when CONFIG_LINUX is off. These files include both "include/standard-headers/linux/input.h" and <windows.h> then. Doesn't work, because both define SW_MAX. We don't actually use it. Patch input.h to define SW_MAX_ instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1444320700-26260-2-git-send-email-armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-09Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell3-35/+5
into staging # gpg: Signature made Fri 09 Oct 2015 10:15:13 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/tracing-pull-request: trace: remove malloc tracing docs: update the usage example of "dtrace" backend in tracing.txt Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-09Merge remote-tracking branch ↵Peter Maydell27-91/+83
'remotes/mjt/tags/pull-trivial-patches-2015-10-08' into staging trivial patches for 2015-10-08 # gpg: Signature made Thu 08 Oct 2015 17:51:05 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-10-08: tests: Unique test path for /string-visitor/output linux-user: Remove type casts to union type linux-user: Use g_new() & friends where that makes obvious sense rocker: Use g_new() & friends where that makes obvious sense .travis.yml: Run make check for all targets, not just some hw: char: Remove unnecessary variable hw: timer: Remove unnecessary variable qapi: add missing @ MAINTAINERS: Add NSIS file for W32, W64 hosts target-ppc: Remove unnecessary variable target-microblaze: Remove unnecessary variable s/cpu_get_real_ticks/cpu_get_host_ticks/ pc: check for underflow in load_linux pci-assign: do not include sys/io.h block/ssh: remove dead code imx_serial: Generate interrupt on tx empty if enabled sdhci: Change debug prints to compile unconditionally sdhci: use PRIx64 for uint64_t type Add .dir-locals.el file to configure emacs coding style Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-09trace: remove malloc tracingPaolo Bonzini2-30/+0
The malloc vtable is not supported anymore in glib, because it broke when constructors called g_malloc. Remove tracing of g_malloc, g_realloc and g_free calls. Note that, for systemtap users, glib also provides tracepoints glib.mem_alloc, glib.mem_free, glib.mem_realloc, glib.slice_alloc and glib.slice_free. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-id: 1442417924-25831-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-09docs: update the usage example of "dtrace" backend in tracing.txtLin Ma1-5/+5
The usage example of dtrace is quite ancient, We have tracetool.py with different parameters instead of the original tracetool shell script for a long time, So update the old information. Signed-off-by: Lin Ma <lma@suse.com> Message-id: 1441954730-17341-1-git-send-email-lma@suse.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-08tests: Unique test path for /string-visitor/outputDr. David Alan Gilbert1-8/+8
Newer GLib's want unique test paths, and thus moan at dupes. (Seen on Fedora 23 which has glib 2.46) Uniquify the paths. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08linux-user: Remove type casts to union typeStefan Weil1-4/+4
Casting to a union type is a gcc (and clang) extension. Other compilers might not support it. This is not a problem today, but the type casts can be removed easily. Smatch now no longer complains like before: linux-user/syscall.c:3190:18: warning: cast to non-scalar linux-user/syscall.c:7348:44: warning: cast to non-scalar Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08linux-user: Use g_new() & friends where that makes obvious senseMarkus Armbruster3-3/+3
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Same Coccinelle semantic patch as in commit b45c03f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08rocker: Use g_new() & friends where that makes obvious senseMarkus Armbruster4-9/+8
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Same Coccinelle semantic patchas in commit b45c03f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08.travis.yml: Run make check for all targets, not just someDavid Gibson1-9/+1
ed173cb ".travis.yml: remove "make check" from main matrix" stopped running make check for all the Travis build targets for various reasons. It continued to run make check on one Travis build, which builds for a big list of all (? nearly all) our supported softmmu targets. Unfortunately, due to a spacing / quoting error it only actually builds for the alpha, arm, aarch64 and cris targets. Specifically, the list of targets is split over several lines. Even with YAML folding, this will leave spaces in the list, meaning $TARGETS won't have the value we need. I had a look at the YAML spec and I couldn't quickly see a way of splitting the list so that it doesn't end up with spaces, so this patch fixes the problem by putting the whole list on one huge line. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08hw: char: Remove unnecessary variableShraddha Barke1-3/+1
Compress lines and remove the variable. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08hw: timer: Remove unnecessary variableShraddha Barke1-3/+1
Compress lines and remove the variable. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08qapi: add missing @Marc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08MAINTAINERS: Add NSIS file for W32, W64 hostsStefan Weil1-0/+1
The NSIS installer configuration is maintained by me. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08target-ppc: Remove unnecessary variableShraddha Barke1-2/+1
Compress lines and remove the variable. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08target-microblaze: Remove unnecessary variableShraddha Barke1-3/+1
Compress lines and remove the variable. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08s/cpu_get_real_ticks/cpu_get_host_ticks/Christopher Covington7-20/+20
This should help clarify the purpose of the function that returns the host system's CPU cycle count. Signed-off-by: Christopher Covington <cov@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> ppc portion Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08pc: check for underflow in load_linuxPaolo Bonzini1-0/+4
If (setup_size+1)*512 is small enough, kernel_size -= setup_size can allocate a huge amount of memory. Avoid that. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08pci-assign: do not include sys/io.hPaolo Bonzini1-1/+0
This file does not exist on bionic libc and the functions it defines are in fact not used by pci-assign.c. Remove it. Reported-by: Houcheng Lin <houcheng@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08block/ssh: remove dead codePaolo Bonzini1-4/+1
The "err" label cannot be reached with qp != NULL. Remove the free-ing of qp and avoid future regressions by removing the initializer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> ACKed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08imx_serial: Generate interrupt on tx empty if enabledGuenter Roeck1-1/+3
Generate an interrupt if the tx buffer is empty and the tx empty interrupt is enabled. This fixes a problem seen when running a Linux image since Linux commit 55c3cb1358e ("serial: imx: remove unneeded imx_transmit_buffer() from imx_start_tx()"). Linux now waits for the tx empty interrupt before starting to send data, causing transmit stalls until there is an interrupt for another reason. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08sdhci: Change debug prints to compile unconditionallySai Pavan Boddu1-18/+18
Conditional compilation hides few type mismatch warnings, fix it to compile unconditionally. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Suggested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08sdhci: use PRIx64 for uint64_t typeSai Pavan Boddu1-2/+5
Fix compile time warnings, because of type mismatch for unsigned long long type. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08Add .dir-locals.el file to configure emacs coding styleDaniel P. Berrange1-0/+2
Some default emacs setups indent by 2 spaces and uses tabs which is counter to the QEMU coding style rules. Adding a .dir-locals.el file in the top level of the GIT repo will inform emacs about the QEMU coding style, and so assist contributors in avoiding common style mistakes before they submit patches. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20151007.0' ↵Peter Maydell7-116/+204
into staging VFIO updates 2015-10-07 - Change platform device IRQ setup sequence for compatibility with upcoming IRQ forwarding (Eric Auger) - Extensions to support vfio-pci devices on spapr-pci-host-bridge (David Gibson) [clang problem patch dropped] # gpg: Signature made Wed 07 Oct 2015 16:30:52 BST using RSA key ID 3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" * remotes/awilliam/tags/vfio-update-20151007.0: vfio: Allow hotplug of containers onto existing guest IOMMU mappings memory: Allow replay of IOMMU mapping notifications vfio: Record host IOMMU's available IO page sizes vfio: Check guest IOVA ranges against host IOMMU capabilities vfio: Generalize vfio_listener_region_add failure path vfio: Remove unneeded union from VFIOContainer hw/vfio/platform: do not set resamplefd for edge-sensitive IRQS hw/vfio/platform: change interrupt/unmask fields into pointer hw/vfio/platform: irqfd setup sequence update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20151007' into stagingPeter Maydell45-1492/+964
Do away with TB retranslation # gpg: Signature made Wed 07 Oct 2015 10:42:08 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tcg-20151007: (26 commits) tcg: Adjust CODE_GEN_AVG_BLOCK_SIZE tcg: Check for overflow via highwater mark tcg: Allocate a guard page after code_gen_buffer tcg: Emit prologue to the beginning of code_gen_buffer tcg: Remove tcg_gen_code_search_pc tcg: Remove gen_intermediate_code_pc tcg: Save insn data and use it in cpu_restore_state_from_tb tcg: Pass data argument to restore_state_to_opc tcg: Add TCG_MAX_INSNS target-*: Drop cpu_gen_code define tcg: Merge cpu_gen_code into tb_gen_code target-sparc: Add npc state to insn_start target-sparc: Remove gen_opc_jump_pc target-sparc: Split out gen_branch_n target-sparc: Tidy gen_branch_a interface target-cris: Mirror gen_opc_pc into insn_start target-sh4: Add flags state to insn_start target-s390x: Add cc_op state to insn_start target-mips: Add delayed branch state to insn_start target-i386: Add cc_op state to insn_start ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08Merge remote-tracking branch 'remotes/rth/tags/pull-tile-20151007' into stagingPeter Maydell10-81/+799
Collected patches # gpg: Signature made Wed 07 Oct 2015 10:30:17 BST using RSA key ID 4DD0279B # gpg: Good signature from "Richard Henderson <rth7680@gmail.com>" # gpg: aka "Richard Henderson <rth@redhat.com>" # gpg: aka "Richard Henderson <rth@twiddle.net>" * remotes/rth/tags/pull-tile-20151007: target-tilegx: Support iret instruction and related special registers target-tilegx: Use TILEGX_EXCP_OPCODE_UNKNOWN and TILEGX_EXCP_OPCODE_UNIMPLEMENTED correctly target-tilegx: Implement v2mults instruction target-tilegx: Implement v?int_* instructions. target-tilegx: Implement v2sh* instructions target-tilegx: Handle nofault prefetch instructions target-tilegx: Fix a typo for mnemonic about "ld_add" target-tilegx: Use TILEGX_EXCP_SIGNAL instead of TILEGX_EXCP_SEGV target-tilegx: Decode ill pseudo-instructions linux-user/tilegx: Implement tilegx signal features linux-user/syscall_defs.h: Sync the latest si_code from Linux kernel target-tilegx: Let x1 pipe process bpt instruction only target-tilegx: Implement complex multiply instructions target-tilegx: Implement table index instructions target-tilegx: Implement crc instructions target-tilegx: Implement v1multu instruction target-tilegx: Implement v*add and v*sub instructions target-tilegx: Implement v*shl, v*shru, and v*shrs instructions target-tilegx: Tidy simd_helper.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into ↵Peter Maydell1-2/+3
staging NUMA queue, 2015-10-06 # gpg: Signature made Tue 06 Oct 2015 20:53:42 BST using RSA key ID 984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" * remotes/ehabkost/tags/numa-pull-request: pc-dimm: Fail realization for invalid nodes in non-NUMA config Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08gtk/opengl: add opengl context and scanout support (GtkGLArea)Gerd Hoffmann5-24/+365
This allows virtio-gpu to render in 3d mode. Uses native opengl support which is present in gtk versions 3.16 and newer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-08gtk/opengl: add opengl context and scanout support (egl)Gerd Hoffmann3-8/+146
This allows virtio-gpu to render in 3d mode. Uses egl, for gtk versions 3.14 and older. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-10-08opengl: add egl-context.[ch] helpersGerd Hoffmann3-0/+49
Add helper functions to manage opengl contexts using egl. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-10-08virtio-gpu: add cursor update tracepointGerd Hoffmann2-1/+9
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-29 23:36:41 +0000