summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-09-11maint: remove unused include for signal.hDaniel P. Berrange10-10/+0
A number of files were including signal.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for dirent.hDaniel P. Berrange5-6/+0
A number of files were including dirent.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for assert.hDaniel P. Berrange8-9/+0
A number of files were including assert.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange23-26/+26
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove double semicolons in many filesDaniel P. Berrange5-6/+6
A number of source files have statements accidentally terminated by a double semicolon - eg 'foo = bar;;'. This is harmless but a mistake none the less. The tcg/ia64/tcg-target.c file is whitelisted because it has valid use of ';;' in a comment containing assembly code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11i6300esb: fix timer overflowLaurent Vivier1-1/+1
We use muldiv64() to compute the time to wait: timeout = muldiv64(get_ticks_per_sec(), timeout, 33000000); but get_ticks_per_sec() is 10^9 (30 bit value) and timeout is a 35 bit value. Whereas muldiv64 is: uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c) So we loose 3 bits of timeout. Swapping get_ticks_per_sec() and timeout fixes it. We can also replace it by a multiplication by 30 ns, but this changes PCI clock frequency from 33MHz to 33.333333MHz and we need to do this on all the QEMU PCI devices (later...) Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11Trivial: fix commandline help messageAndrey Korolyov1-1/+1
Fix obvious typo in printed help for qemu-nbd. Signed-off-by: Andrey Korolyov <andrey@xdel.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11Update language files for QEMU 2.4.0Stefan Weil7-108/+188
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-10Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' ↵Peter Maydell23-230/+1179
into staging xen-2015-09-10 # gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits) xen/pt: Don't slurp wholesale the PCI configuration registers xen/pt: Check for return values for xen_host_pci_[get|set] in init xen/pt: Move bulk of xen_pt_unregister_device in its own routine. xen/pt: Make xen_pt_unregister_device idempotent xen/pt: Log xen_host_pci_get/set errors in MSI code. xen/pt: Log xen_host_pci_get in two init functions xen/pt: Remove XenPTReg->data field. xen/pt: Check if reg->init function sets the 'data' past the reg->size xen/pt: Sync up the dev.config and data values. xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings. xen/pt/msi: Add the register value when printing logging and error messages xen: use errno instead of rc for xc_domain_add_to_physmap xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure xen/pt: Make xen_pt_msi_set_enable static xen/pt: Update comments with proper function name. xen/HVM: atomically access pointers in bufioreq handling xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting xen, gfx passthrough: add opregion mapping xen, gfx passthrough: register host bridge specific to passthrough ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10xen/pt: Don't slurp wholesale the PCI configuration registersKonrad Rzeszutek Wilk1-6/+1
Instead we have the emulation registers ->init functions which consult the host values to see what the initial value should be and they are responsible for populating the dev.config. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Check for return values for xen_host_pci_[get|set] in initKonrad Rzeszutek Wilk1-8/+16
and if we have failures we call xen_pt_destroy introduced in 'xen/pt: Move bulk of xen_pt_unregister_device in its own routine.' and free all of the allocated structures. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Move bulk of xen_pt_unregister_device in its own routine.Konrad Rzeszutek Wilk1-58/+63
This way we can call it if we fail during init. This code movement introduces no changes. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Make xen_pt_unregister_device idempotentKonrad Rzeszutek Wilk4-6/+22
To deal with xen_host_pci_[set|get]_ functions returning error values and clearing ourselves in the init function we should make the .exit (xen_pt_unregister_device) function be idempotent in case the generic code starts calling .exit (or for fun does it before calling .init!). Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Log xen_host_pci_get/set errors in MSI code.Konrad Rzeszutek Wilk1-4/+14
We seem to only use these functions when de-activating the MSI - so just log errors. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Log xen_host_pci_get in two init functionsKonrad Rzeszutek Wilk1-0/+9
To help with troubleshooting in the field. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Remove XenPTReg->data field.Konrad Rzeszutek Wilk2-30/+49
We do not want to have two entries to cache the guest configuration registers: XenPTReg->data and dev.config. Instead we want to use only the dev.config. To do without much complications we rip out the ->data field and replace it with an pointer to the dev.config. This way we have the type-checking (uint8_t, uint16_t, etc) and as well and pre-computed location. Alternatively we could compute the offset in dev.config by using the XenPTRRegInfo and XenPTRegGroup every time but this way we have the pre-computed values. This change also exposes some mis-use: - In 'xen_pt_status_reg_init' we used u32 for the Capabilities Pointer register, but said register is an an u16. - In 'xen_pt_msgdata_reg_write' we used u32 but should have only use u16. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Check if reg->init function sets the 'data' past the reg->sizeKonrad Rzeszutek Wilk1-2/+8
It should never happen, but in case it does (an developer adds a new register and the 'init_val' expands past the register size) we want to report. The code will only write up to reg->size so there is no runtime danger of the register spilling across other ones - however to catch this sort of thing we still return an error. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Sync up the dev.config and data values.Konrad Rzeszutek Wilk1-1/+58
For a passthrough device we maintain a state of emulated registers value contained within d->config. We also consult the host registers (and apply ro and write masks) whenever the guest access the registers. This is done in xen_pt_pci_write_config and xen_pt_pci_read_config. Also in this picture we call pci_default_write_config which updates the d->config and if the d->config[PCI_COMMAND] register has PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) acts on those changes. On startup the d->config[PCI_COMMAND] are the host values, not what the guest initial values should be, which is exactly what we do _not_ want to do for 64-bit BARs when the guest just wants to read the size of the BAR. Huh you say? To get the size of 64-bit memory space BARs, the guest has to calculate ((BAR[x] & 0xFFFFFFF0) + ((BAR[x+1] & 0xFFFFFFFF) << 32)) which means it has to do two writes of ~0 to BARx and BARx+1. prior to this patch and with XSA120-addendum patch (Linux kernel) the PCI_COMMAND register is copied from the host it can have PCI_COMMAND_MEMORY bit set which means that QEMU will try to update the hypervisor's P2M with BARx+1 value to ~0 (0xffffffff) (to sync the guest state to host) instead of just having xen_pt_pci_write_config and xen_pt_bar_reg_write apply the proper masks and return the size to the guest. To thwart this, this patch syncs up the host values with the guest values taking into account the emu_mask (bit set means we emulate, PCI_COMMAND_MEMORY and PCI_COMMAND_IO are set). That is we copy the host values - masking out any bits which we will emulate. Then merge it with the initial emulation register values. Lastly this value is then copied both in dev.config _and_ XenPTReg->data field. There is also reg->size accounting taken into consideration that ends up being used in patch. xen/pt: Check if reg->init function sets the 'data' past the reg->size This fixes errors such as these: (XEN) memory_map:add: dom2 gfn=fffe0 mfn=fbce0 nr=20 (DEBUG) 189 pci dev 04:0 BAR16 wrote ~0. (DEBUG) 200 pci dev 04:0 BAR16 read 0x0fffe0004. (XEN) memory_map:remove: dom2 gfn=fffe0 mfn=fbce0 nr=20 (DEBUG) 204 pci dev 04:0 BAR16 wrote 0x0fffe0004. (DEBUG) 217 pci dev 04:0 BAR16 read upper 0x000000000. (XEN) memory_map:add: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 (XEN) p2m.c:883:d0v0 p2m_set_entry failed! mfn=ffffffffffffffff rc:-22 (XEN) memory_map:fail: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 ret:-22 (XEN) memory_map:remove: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 (XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=ffffffff00000 type:4 (XEN) p2m.c:920:d0v0 gfn_to_mfn failed! gfn=ffffffff00001 type:4 .. (XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff] (DEBUG) 222 pci dev 04:0 BAR16 read upper 0x0ffffffff. (XEN) memory_map:remove: dom2 gfn=ffffffff00000 mfn=fbce0 nr=20 (XEN) memory_map: error -22 removing dom2 access to [fbce0,fbcff] [The DEBUG is to illustate what the hvmloader was doing] Also we swap from xen_host_pci_long to using xen_host_pci_get_[byte,word,long]. Otherwise we get: xen_pt_config_reg_init: Offset 0x0004 mismatch! Emulated=0x0000, host=0x2300017, syncing to 0x2300014. xen_pt_config_reg_init: Error: Offset 0x0004:0x2300014 expands past register size(2)! which is not surprising. We read the value as an 32-bit (from host), then operate it as a 16-bit - and the remainder is left unchanged. We end up writing the value as 16-bit (so 0014) to dev.config (as we use proper xen_set_host_[byte,word,long] so we don't spill to other registers) but in XenPTReg->data it is as 32-bit (0x2300014)! It is harmless as the read/write functions end up using an size mask and never modify the bits past 16-bit (reg->size is 2). This patch fixes the warnings by reading the value using the proper size. Note that the check for size is still left in-case the developer sets bits past the reg->size in the ->init routines. The author tried to fiddle with QEMU_BUILD_BUG to make this work but failed. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.configKonrad Rzeszutek Wilk2-28/+73
During init time we treat the dev.config area as a cache of the host view. However during execution time we treat it as guest view (by the generic PCI API). We need to sync Xen's code to the generic PCI API view. This is the first step by replacing all of the code that uses dev.config or pci_get_[byte|word] to get host value to actually use the xen_host_pci_get_[byte|word] functions. Interestingly in 'xen_pt_ptr_reg_init' we also needed to swap reg_field from uint32_t to uint8_t - since the access is only for one byte not four bytes. We can split this as a seperate patch however we would have to use a cast to thwart compiler warnings in the meantime. We also truncated 'flags' to 'flag' to make the code fit within the 80 characters. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-09-10' ↵Peter Maydell5-122/+233
into staging error: On abort, report where the error was created # gpg: Signature made Thu 10 Sep 2015 13:01:39 BST using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-09-10: error: On abort, report where the error was created error: Revamp interface documentation error: error_set_errno() is unused, drop qga/vss-win32: Document the DLL requires non-null errp qga: Clean up unnecessarily dirty casts error: Make error_setg() a function error: De-duplicate code creating Error objects Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.Konrad Rzeszutek Wilk1-1/+1
If XEN_PT_LOGGING_ENABLED is enabled the XEN_PT_LOG macros start using the first argument. Which means if within the function there is only one user of the argument ('d') and XEN_PT_LOGGING_ENABLED is not set, we get compiler warnings. This is not the case now but with the "xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config" we will hit - so this sync up the function to the rest of them. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt/msi: Add the register value when printing logging and error messagesKonrad Rzeszutek Wilk1-3/+3
We would like to know what the MSI register value is to help in troubleshooting in the field. As such modify the logging logic to include such details in xen_pt_msgctrl_reg_write. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen: use errno instead of rc for xc_domain_add_to_physmapKonrad Rzeszutek Wilk3-2/+25
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592 "libxc: Fix do_memory_op to return negative value on errors" made the libxc API less odd-ball: On errors, return value is -1 and error code is in errno. On success the return value is either 0 or an positive value. Since we could be running with an old toolstack in which the Exx value is in rc or the newer, we add an wrapper around the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap) which will always return the EXX. Xen 4.6 did not change the libxc functions mentioned (same parameters) so we piggyback on the fact that Xen 4.6 has a new function: commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose new hypercall xc_reserved_device_memory_map" and check for that. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: xen_host_pci_config_read returns -errno, not -1 on failureKonrad Rzeszutek Wilk1-1/+1
However the init routines assume that on errors the return code is -1 (as the libxc API is) - while those xen_host_* routines follow another paradigm - negative errno on return, 0 on success. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Make xen_pt_msi_set_enable staticKonrad Rzeszutek Wilk2-2/+1
As we do not use it outside our code. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Update comments with proper function name.Konrad Rzeszutek Wilk1-2/+2
It has changed but the comments still refer to the old names. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/HVM: atomically access pointers in bufioreq handlingJan Beulich3-9/+56
The number of slots per page being 511 (i.e. not a power of two) means that the (32-bit) read and write indexes going beyond 2^32 will likely disturb operation. The hypervisor side gets I/O req server creation extended so we can indicate that we're using suitable atomic accesses where needed, allowing it to atomically canonicalize both pointers when both have gone through at least one cycle. The Xen side counterpart (which is not a functional prereq to this change, albeit a build one) went in already (commit b7007bc6f9). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen-hvm: When using xc_domain_add_to_physmap also include errno when reportingKonrad Rzeszutek Wilk1-2/+2
.errors - as it will most likely have the proper error value. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: add opregion mappingTiejun Chen3-3/+136
The OpRegion shouldn't be mapped 1:1 because the address in the host can't be used in the guest directly. This patch traps read and write access to the opregion of the Intel GPU config space (offset 0xfc). The original patch is from Jean Guyader <jean.guyader@eu.citrix.com> Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: register host bridge specific to passthroughTiejun Chen1-2/+13
Just register that pci host bridge specific to passthrough. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: register a isa bridgeTiejun Chen1-0/+22
Currently we just register this isa bridge when we use IGD passthrough in Xen side. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10igd gfx passthrough: create a isa bridgeTiejun Chen2-0/+113
Currently IGD drivers always need to access PCH by 1f.0. But we don't want to poke that directly to get ID, and although in real world different GPU should have different PCH. But actually the different PCH DIDs likely map to different PCH SKUs. We do the same thing for the GPU. For PCH, the different SKUs are going to be all the same silicon design and implementation, just different features turn on and off with fuses. The SW interfaces should be consistent across all SKUs in a given family (eg LPT). But just same features may not be supported. Most of these different PCH features probably don't matter to the Gfx driver, but obviously any difference in display port connections will so it should be fine with any PCH in case of passthrough. So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell) scenarios, 0x9cc3 for BDW(Broadwell). Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10xen, gfx passthrough: retrieve VGA BIOS to workTiejun Chen3-0/+94
Now we retrieve VGA bios like kvm stuff in qemu but we need to fix Device Identification in case if its not matched with the real IGD device since Seabios is always trying to compare this ID to work out VGA BIOS. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: basic graphics passthrough supportTiejun Chen10-1/+165
basic gfx passthrough support: - add a vga type for gfx passthrough - register/unregister legacy VGA I/O ports and MMIOs for passthrough GFX Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10hw/pci-assign: split pci-assign.cTiejun Chen4-75/+126
We will try to reuse assign_dev_load_option_rom in xen side, and especially its a good beginning to unify pci assign codes both on kvm and xen in the future. [Fix build for Windows] Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10piix: create host bridge to passthroughTiejun Chen2-0/+87
Implement a pci host bridge specific to passthrough. Actually this just inherits the standard one. And we also just expose a minimal real host bridge pci configuration subset. [Replace pread with lseek and read to fix Windows build] Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10error: On abort, report where the error was createdMarkus Armbruster5-30/+81
This is particularly useful when we abort in error_propagate(), because there the stack backtrace doesn't lead to where the error was created. Looks like this: Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322: qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action Aborted (core dumped) Note: to get this example output, I monkey-patched drive_new() to pass &error_abort to blockdev_init(). To keep the error handling boiler plate from growing even more, all error_setFOO() become macros expanding into error_setFOO_internal() with additional __FILE__, __LINE__, __func__ arguments. Not exactly pretty, but it works. The macro trickery breaks down when you take the address of an error_setFOO(). Fortunately, we do that in just one place: qemu-ga's Windows VSS provider and requester DLL wants to call error_setg_win32() through a function pointer "to avoid linking glib to the DLL". Use error_setg_win32_internal() there. The use of the function pointer is already wrapped in a macro, so the churn isn't bad. Code size increases by some 35KiB for me (0.7%). Tolerable. Could be less if we passed relative rather than absolute source file names to the compiler, or forwent reporting __func__. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com>
2015-09-10error: Revamp interface documentationMarkus Armbruster1-47/+124
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10error: error_set_errno() is unused, dropMarkus Armbruster2-8/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10qga/vss-win32: Document the DLL requires non-null errpMarkus Armbruster3-2/+4
requester.cpp uses this pattern to receive an error and pass it on to the caller (err_is_set() macro peeled off for clarity): ... code that may set errset->errp ... if (errset->errp && *errset->errp) { ... handle error ... } This breaks when errset->errp is null. As far as I can tell, it currently isn't, so this is merely fragile, not actually broken. The robust way to do this is to receive the error in a local variable, then propagate it up, like this: Error *err = NULL; ... code that may set err ... if (err) ... handle error ... error_propagate(errset->errp, err); } See also commit 5e54769, 0f230bf, a903f40. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10qga: Clean up unnecessarily dirty castsMarkus Armbruster5-19/+13
qga_vss_fsfreeze() casts error_set_win32() from void (*)(Error **, int, ErrorClass, const char *, ...) to void (*)(void **, int, int, const char *, ...) The result is later called. Since the two types are not compatible, the call is undefined behavior. It works in practice anyway. However, there's no real need for trickery here. Clean it up as follows: * Declare struct Error, and fix the first parameter. * Switch to error_setg_win32(). This gets rid of the troublesome ErrorClass parameter. Requires converting error_setg_win32() from macro to function, but that's trivially easy, because this is the only user of error_set_win32(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10error: Make error_setg() a functionMarkus Armbruster2-2/+11
Saves a tiny amount of code at every call site. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10error: De-duplicate code creating Error objectsMarkus Armbruster1-43/+25
Duplicated when commit 680d16d added error_set_errno(), and again when commit 20840d4 added error_set_win32(). Make the original copy in error_set() reusable by factoring out error_setv(), then rewrite error_set_errno() and error_set_win32() on top of it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-09-10Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell21-82/+86
virtio,pc,acpi fixes, cleanups Fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 10 Sep 2015 10:16:18 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: hw/pci: fix pci_update_mappings() trace events pc: memhotplug: keep reserved-memory-end broken on 2.4 and earlier machines pc: memhotplug: fix incorrectly set reserved-memory-end acpi: Remove unused definition. virtio: avoid leading underscores for helpers pc: Remove redundant arguments from xen_hvm_init() pci: Fix pci_device_iommu_address_space() bus propagation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-10hw/pci: fix pci_update_mappings() trace eventsLaszlo Ersek2-4/+4
The current trace prototypes and (matching) trace calls lead to "unorthodox" PCI BDF notation in at least the stderr trace backend. For example, the four BARs of a QXL video card at 00:01.0 (bus 0, slot 1, function 0) are traced like this (PID and timestamps removed): pci_update_mappings_add d=0x7f14a73bf890 00:00.1 0,0x84000000+0x4000000 pci_update_mappings_add d=0x7f14a73bf890 00:00.1 1,0x80000000+0x4000000 pci_update_mappings_add d=0x7f14a73bf890 00:00.1 2,0x88200000+0x2000 pci_update_mappings_add d=0x7f14a73bf890 00:00.1 3,0xd060+0x20 The slot and function values are in reverse order. Stick with the conventional BDF notation. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Don Koch <dkoch@verizon.com> Cc: qemu-trivial@nongnu.org Fixes: 7828d75045 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10pc: memhotplug: keep reserved-memory-end broken on 2.4 and earlier machinesIgor Mammedov4-2/+11
it will prevent guests on old machines from seeing inconsistent memory mapping in firmware/ACPI views. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2015-09-10pc: memhotplug: fix incorrectly set reserved-memory-endIgor Mammedov1-1/+3
reserved-memory-end tells firmware address from which it could start treating memory as PCI address space and map PCI BARs after it to avoid collisions with RAM. Currently it is incorrectly pointing to address where hotplugged memory range starts which could redirect hotplugged RAM accesses to PCI BARs when firmware maps them over RAM or viceverse. Fix this by pointing reserved-memory-end to the end of memory hotplug area. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2015-09-10acpi: Remove unused definition.Richard W.M. Jones1-1/+0
Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10virtio: avoid leading underscores for helpersCornelia Huck11-45/+48
Commit ef546f1275f6563e8934dd5e338d29d9f9909ca6 ("virtio: add feature checking helpers") introduced a helper __virtio_has_feature. We don't want to use reserved identifiers, though, so let's rename __virtio_has_feature to virtio_has_feature and virtio_has_feature to virtio_vdev_has_feature. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-10pc: Remove redundant arguments from xen_hvm_init()Eduardo Habkost5-23/+17
Remove arguments that can be found in PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 05:10:16 +0000