summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-12-19janitor: do not rely on indirect inclusions of or from qemu-char.hPaolo Bonzini26-0/+27
Various header files rely on qemu-char.h including qemu-config.h or main-loop.h, but they really do not need qemu-char.h at all (particularly interesting is the case of the block layer!). Clean this up, and also add missing inclusions of qemu-char.h itself. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libuserPaolo Bonzini5-35/+6
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini51-115/+86
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: create ldscripts/Paolo Bonzini14-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: move rules from Makefile to */Makefile.objsPaolo Bonzini5-10/+12
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: add $(TARGET_DIR) to "GEN config-target.h" linesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: adjust setting of QEMU_INCLUDESPaolo Bonzini3-4/+4
Make it correct for nested directories, and move the static part from Makefile to configure. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19vscclient: use per-target variablesPaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17libcacard: simplify rules for recursive buildPaolo Bonzini1-9/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEADPaolo Bonzini138-290/+293
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17kvm: do not flush after deleting gsiMichael S. Tsirkin1-2/+0
Deleting a GSI isn't necessary: it is enough to stop using it. Delay flush until an entry is used. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci_bus.h: tweak include guardsMichael S. Tsirkin1-3/+3
Now that header has been renamed, tweak include guards to match. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci_bus: update commentMichael S. Tsirkin1-7/+3
Don't ask everyone to desist from including this header, simply recommend using accessors. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: rename pci_internals.h pci_bus.hMichael S. Tsirkin13-12/+12
There are lots of external users of pci_internals.h, apparently making it an internal interface only didn't work out. Let's stop pretending it's an internal header. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17Revert "pci: prepare makefiles for pci code reorganization"Michael S. Tsirkin4-4/+0
This reverts commit 475d67c3bcd6ba9fef917b6e59d96ae69eb1a9b4. Now that all users have been updated, we don't need the makefile hack or the softlink anymore. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: fix path for local includesMichael S. Tsirkin22-62/+62
Include dependencies from pci core using the correct path. This is required now that it's in the separate directory. Need to check whether they can be minimized, for now, keep the code as is. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin102-159/+159
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: move pci core code to hw/pciMichael S. Tsirkin32-11/+11
Move files and modify makefiles to pick them at the new location. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-16exec: refactor cpu_restore_stateBlue Swirl23-172/+65
Refactor common code around calls to cpu_restore_state(). tb_find_pc() has now no external users, make it static. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-16exec: move TB handling to translate-all.cBlue Swirl3-1711/+1755
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-16exec: extract TB watchpoint checkBlue Swirl1-8/+14
Will be moved by the next patch. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-16exec: fix coding styleBlue Swirl1-68/+110
Fix coding style in areas to be moved by later patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-15Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agrafBlue Swirl25-1007/+1042
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (40 commits) pseries: Increase default NVRAM size target-ppc: Don't use hwaddr to represent hardware state PPC: e500: pci: Export slot2irq calculation PPC: E500plat: Make a lot of PCI slots available PPC: E500: Move PCI slot information into params PPC: E500: Generate dt pci irq map dynamically PPC: E500: PCI: Make IRQ calculation more generic PPC: E500: PCI: Make first slot qdev settable openpic: Accelerate pending irq search openpic: fix minor coding style issues MSI-X: Fix endianness PPC: e500: Declare pci bridge as bridge PPC: e500: Add MSI support openpic: add Shared MSI support openpic: make brr1 model specific openpic: convert to qdev openpic: remove irq_out openpic: rename openpic_t to OpenPICState openpic: convert simple reg operations to builtin bitops openpic: remove unused type variable ...
2012-12-15target-xtensa: fix ITLB/DTLB page protection flagsMax Filippov1-1/+2
With MMU option xtensa architecture has two TLBs: ITLB and DTLB. ITLB is only used for code access, DTLB is only for data. However TLB entries in both TLBs have attribute field controlling write and exec access. These bits need to be properly masked off depending on TLB type before being used as tlb_set_page prot argument. Otherwise the following happens: (1) ITLB entry for some PFN gets invalidated (2) DTLB entry for the same PFN gets updated, attributes allow code execution (3) code at the page with that PFN is executed (possible due to step 2), entry for the TB is written into the jump cache (4) QEMU TLB entry for the PFN gets replaced with an entry for some other PFN (5) code in the TB from step 3 is executed (possible due to jump cache) and it accesses data, for which there's no DTLB entry, causing DTLB miss exception (6) re-translation of the TB from step 5 is attempted, but there's no QEMU TLB entry nor xtensa ITLB entry for that PFN, which causes ITLB miss exception at the TB start address (7) ITLB miss exception is handled by the guest, but execution is resumed from the beginning of the faulting TB (the point where ITLB miss occured), not from the point where DTLB miss occured, which is wrong. With that fix the above scenario causes ITLB miss exception (that used to be step 7) at step 3, right at the beginning of the TB. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Cc: qemu-stable@nongnu.org Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-14console: clip update rectangleGerd Hoffmann1-0/+10
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-14pixman: fix vnc tight png/jpeg supportGerd Hoffmann5-7/+7
This patch adds an x argument to qemu_pixman_linebuf_fill so it can also be used to convert a partial scanline. Then fix tight + png/jpeg encoding by passing in the x+y offset, so the data is read from the correct screen location instead of the upper left corner. Cc: 1087974@bugs.launchpad.net Cc: qemu-stable@nongnu.org Reported-by: Tim Hardeneck <thardeck@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-14pixman: update internal copy to pixman-0.28.2Gerd Hoffmann1-0/+0
Some w64 fixes by Stefan Weil found their way into 0.28.2, so update the internal copy to that version to improve windows support. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-14Revert "pixman: require 0.18.4 or newer"Gerd Hoffmann1-2/+2
This reverts commit 288fa40736e6eb63132d01aa6dc21ee831b796ae. The only reason old pixman versions didn't work was the missing PIXMAN_TYPE_BGRA, which is properly #ifdef'ed now. So we don't have to require a minimum pixman version. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-14pixman: fix version check for PIXMAN_TYPE_BGRAGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-14pseries: Increase default NVRAM sizeDavid Gibson1-1/+1
If no image file for NVRAM is specified, the pseries machine currently creates a 16K non-persistent NVRAM by default. This basically works, but is not large enough for current firmware and guest kernels to create all the NVRAM partitions they would like to. Increasing the default size to 64K addresses this and stops the guest generating error messages. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14target-ppc: Don't use hwaddr to represent hardware stateDavid Gibson1-1/+1
The hwaddr type is somewhat vaguely defined as being able to contain bus addresses on the widest possible bus in the system. For that reason it's discouraged for representing specific pieces of persistent hardware state, which should instead use an explicit width type that matches the bits available in real hardware. In particular, because of the possibility that the size of hwaddr might change if different buses are added to the target in future, it's not suitable for use in vm state descriptions for savevm and migration. This patch purges such unwise uses of hwaddr from the ppc target code, which turns out to be just one. The ppcemb_tlb_t struct, used on a number of embedded ppc models to represent a TLB entry contains a hwaddr for the real address field. This patch changes it to be a fixed uint64_t which is suitable enough for all machine types which use this structure. Other uses of hwaddr in CPUPPCState turn out not to be problematic: htab_base and htab_mask are just used for the convenience of the TCG code; the underlying machine state is the SDR1 register, which is stored with a suitable type already. Likewise the mpic_cpu_base field is only used internally and does not represent fundamental hardware state which needs to be saved. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: e500: pci: Export slot2irq calculationAlexander Graf3-2/+15
We need the calculation method to get from a PCI slot ID to its respective interrupt line twice. Once in the internal map function and once when assembling the device tree. So let's extract the calculation to a separate function that can be called by both users. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: E500plat: Make a lot of PCI slots availableAlexander Graf1-2/+3
The ppce500 machine doesn't have to stick to hardware limitations, as it's defined as being fully device tree based. Thus we can change the initial PCI slot ID to 0x1 which gives us a whopping 31 PCI devices we can support with this machine now! Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: E500: Move PCI slot information into paramsAlexander Graf4-1/+9
We have a params struct that allows us to expose differences between e500 machine models. Include PCI slot information there, so we can have different machines with different PCI slot topology. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: E500: Generate dt pci irq map dynamicallyAlexander Graf1-20/+31
Today we're hardcoding the PCI interrupt map in the e500 machine file. Instead, let's write it dynamically so that different machine types can have different slot properties. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: E500: PCI: Make IRQ calculation more genericAlexander Graf1-10/+3
The IRQ line calculation is more or less hardcoded today. Instead, let's write it as an algorithmic function that theoretically allows an arbitrary number of PCI slots. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: E500: PCI: Make first slot qdev settableAlexander Graf1-1/+8
Today the first slot id in our e500 pci implementation is hardcoded to 0x11. Keep it there as default, but allow users to change the default to a different id. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: Accelerate pending irq searchAlexander Graf1-0/+11
When we're done with one interrupt, we need to search for the next pending interrupt in the queue. This search has grown quite big now that we have more than 256 possible irq lines. So let's memorize how many interrupts we have pending in our bitmaps, so that we can always bail out in the usual case - the one where we're all done. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: fix minor coding style issuesAlexander Graf1-6/+6
This patch removes all remaining occurences of spaces before function parameter indicating parenthesis. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14MSI-X: Fix endiannessAlexander Graf1-4/+2
The MSI-X vector tables are usually stored in little endian in memory, so let's mark the accessors as such. This fixes MSI-X on e500 for me. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-14PPC: e500: Declare pci bridge as bridgeAlexander Graf1-0/+6
The new PCI host bridge device needs to identify itself as PCI host bridge. Declare it as such. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14PPC: e500: Add MSI supportAlexander Graf1-0/+23
Now that our interrupt controller supports MSIs, let's expose that feature to the guest through the device tree! Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: add Shared MSI supportAlexander Graf1-20/+130
The OpenPIC allows MSI access through shared MSI registers. Implement them for the MPC8544 MPIC, so we can support MSIs. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: make brr1 model specificAlexander Graf1-1/+4
Now that we can properly distinguish between openpic model differences, let's move brr1 out of the raven code path. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: convert to qdevAlexander Graf4-155/+180
This patch converts the OpenPIC device to qdev. Along the way it renames the "openpic" target to "raven" and the "mpic" target to "fsl_mpic_20", to better reflect the actual models they implement. This way we have a generic OpenPIC device now that can handle different flavors of the OpenPIC specification. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: remove irq_outAlexander Graf4-10/+6
The current openpic emulation contains half-ready code for bypass mode. Remove it, so that when someone wants to finish it they can start from a clean state. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: rename openpic_t to OpenPICStateAlexander Graf1-34/+34
Rename the openpic_t struct to OpenPICState, so it adheres better to the current coding style rules. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: convert simple reg operations to builtin bitopsAlexander Graf1-31/+36
The openpic code has its own bitmap code to access bits inside of a bitmap. However, that is overkill when we simply want to check for a bit inside of a uint32_t. So instead, let's use normal bit masks and C builtin shifts and ands. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: remove unused type variableAlexander Graf1-25/+2
The openpic source irqs are carrying around a type indicator that is never accessed by anything. Remove it. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-14openpic: unify memory api subregionsAlexander Graf1-52/+56
The only difference between the "openpic" and "mpic" memory api subregion descriptors is the endianness. Unify them as openpic accessors with explicit endianness markers in their names. Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 15:47:07 +0000