dnl Process this file with autoconf to produce a configure script. AC_PREREQ(2.59c) AC_INIT(polkit, 0.96, http://lists.freedesktop.org/mailman/listinfo/polkit-devel) AM_INIT_AUTOMAKE(polkit, 0.96) AM_CONFIG_HEADER(config.h) AM_MAINTAINER_MODE m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) # libtool versioning - this applies to all libraries in this package # # See http://sources.redhat.com/autobook/autobook/autobook_91.html#SEC91 for details # LT_CURRENT=0 LT_REVISION=0 LT_AGE=0 AC_SUBST(LT_CURRENT) AC_SUBST(LT_REVISION) AC_SUBST(LT_AGE) AC_ISC_POSIX AC_PROG_CC AM_PROG_CC_STDC AC_HEADER_STDC AM_PROG_LIBTOOL AC_PROG_MAKE_SET AC_PROG_LN_S AC_SYS_LARGEFILE AM_PROG_CC_C_O # Taken from dbus AC_ARG_ENABLE(ansi, [ --enable-ansi enable -ansi -pedantic gcc flags],enable_ansi=$enableval,enable_ansi=no) AC_ARG_ENABLE(verbose-mode, [ --enable-verbose-mode support verbose debug mode],enable_verbose_mode=$enableval,enable_verbose_mode=$USE_MAINTAINER_MODE) AC_ARG_ENABLE(man-pages, [ --enable-man-pages build manual pages],enable_man_pages=$enableval,enable_man_pages=yes) if test "${enable_man_page}" != no; then dnl dnl Check for xsltproc dnl AC_PATH_PROG([XSLTPROC], [xsltproc]) if test -z "$XSLTPROC"; then enable_man_pages=no fi fi AM_CONDITIONAL(MAN_PAGES_ENABLED, test x$enable_man_pages = xyes) GTK_DOC_CHECK([1.3]) #### gcc warning flags if test "x$GCC" = "xyes"; then changequote(,)dnl case " $CFLAGS " in *[\ \ ]-Wall[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wall" ;; esac case " $CFLAGS " in *[\ \ ]-Wchar-subscripts[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wchar-subscripts" ;; esac case " $CFLAGS " in *[\ \ ]-Wmissing-declarations[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wmissing-declarations" ;; esac case " $CFLAGS " in *[\ \ ]-Wnested-externs[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wnested-externs" ;; esac case " $CFLAGS " in *[\ \ ]-Wpointer-arith[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wpointer-arith" ;; esac case " $CFLAGS " in *[\ \ ]-Wcast-align[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wcast-align" ;; esac case " $CFLAGS " in *[\ \ ]-Wsign-compare[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wsign-compare" ;; esac case " $CFLAGS " in *[\ \ ]-Wformat[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wformat" ;; esac case " $CFLAGS " in *[\ \ ]-Wformat-security[\ \ ]*) ;; *) CFLAGS="$CFLAGS -Wformat-security" ;; esac if test "x$enable_ansi" = "xyes"; then case " $CFLAGS " in *[\ \ ]-ansi[\ \ ]*) ;; *) CFLAGS="$CFLAGS -ansi" ;; esac case " $CFLAGS " in *[\ \ ]-D_POSIX_C_SOURCE*) ;; *) CFLAGS="$CFLAGS -D_POSIX_C_SOURCE=199309L" ;; esac case " $CFLAGS " in *[\ \ ]-D_BSD_SOURCE[\ \ ]*) ;; *) CFLAGS="$CFLAGS -D_BSD_SOURCE" ;; esac case " $CFLAGS " in *[\ \ ]-pedantic[\ \ ]*) ;; *) CFLAGS="$CFLAGS -pedantic" ;; esac fi changequote([,])dnl fi PKG_CHECK_MODULES(GLIB, [glib-2.0 >= 2.21.4 gio-2.0 >= 2.21.4]) AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) PKG_CHECK_MODULES(EGG_DBUS, [eggdbus-1 >= 0.6]) AC_SUBST(EGG_DBUS_CFLAGS) AC_SUBST(EGG_DBUS_LIBS) EXPAT_LIB="" AC_ARG_WITH(expat, [ --with-expat= Use expat from here], [ expat=$withval CPPFLAGS="$CPPFLAGS -I$withval/include" LDFLAGS="$LDFLAGS -L$withval/lib" ] ) AC_CHECK_HEADERS(expat.h, [AC_DEFINE(HAVE_EXPAT_H)], [AC_MSG_ERROR([Can't find expat.h. Please install expat.])]) AC_CHECK_LIB(expat,XML_ParserCreate,[EXPAT_LIBS="-lexpat"], [AC_MSG_ERROR([Can't find expat library. Please install expat.])]) AC_SUBST(EXPAT_LIBS) AC_CHECK_FUNCS(clearenv) if test "x$GCC" = "xyes"; then LDFLAGS="-Wl,--as-needed $LDFLAGS" fi dnl --------------------------------------------------------------------------- dnl - Select which authentication framework to use dnl --------------------------------------------------------------------------- AC_ARG_WITH([authfw], AS_HELP_STRING([--with-authfw=], [Authentication framework (none/pam/shadow)])) if ! test -z "$with_authfw" ; then if test x$with_authdb = xdummy ; then if ! test x$with_authfw = xnone ; then AC_MSG_ERROR([Only 'none' is a valid authentication framework for the dummy authorization database]) fi else if test x$with_authfw = xnone ; then AC_MSG_ERROR(['none' is only a valid authentication framework for the dummy authorization database]) fi fi POLKIT_AUTHFW=$with_authfw else if test x$with_authdb = xdummy ; then POLKIT_AUTHFW=none else POLKIT_AUTHFW=pam fi fi AC_SUBST(POLKIT_AUTHFW) AC_DEFINE_UNQUOTED(POLKIT_AUTHFW,"$POLKIT_AUTHFW", [Authentication Framework to use]) case $POLKIT_AUTHFW in none) need_pam=no AC_DEFINE(POLKIT_AUTHFW_NONE, 1, [If using no authentication framework]) ;; pam) need_pam=yes AC_DEFINE(POLKIT_AUTHFW_PAM, 1, [If using the PAM authentication framework]) ;; shadow) need_pam=no AUTH_LIBS="${AUTH_LIBS} -lcrypt" AC_DEFINE(POLKIT_AUTHFW_SHADOW, 1, [If using the Shadow authentication framework]) ;; *) AC_MSG_ERROR([Unknown Authentication Framework: $POLKIT_AUTHFW]) ;; esac AM_CONDITIONAL(POLKIT_AUTHFW_NONE, [test x$POLKIT_AUTHFW = xnone], [Using no authfw]) AM_CONDITIONAL(POLKIT_AUTHFW_PAM, [test x$POLKIT_AUTHFW = xpam], [Using PAM authfw]) AM_CONDITIONAL(POLKIT_AUTHFW_SHADOW, [test x$POLKIT_AUTHFW = xshadow], [Using Shadow authfw]) dnl --------------------------------------------------------------------------- dnl - Check for PAM dnl --------------------------------------------------------------------------- withval="" AC_ARG_WITH(pam-prefix, [ --with-pam-prefix= specify where pam files go],[ if test x$withval != x; then AC_MSG_RESULT("PAM files will be installed in prefix ${withval}.") fi]) if test x$withval != x; then PAM_PREFIX_UNEXPANDED="$withval" else PAM_PREFIX_UNEXPANDED="$sysconfdir" fi PAM_PREFIX=`eval echo $PAM_PREFIX_UNEXPANDED` AC_SUBST(PAM_PREFIX) have_pam=no if test "$need_pam" = yes ; then AC_CHECK_LIB(pam, pam_start, have_pam=yes) fi if test x$have_pam = xno; then if test "$need_pam" = yes ; then AC_ERROR([Could not find pam/pam-devel, please install the needed packages.]) fi else AUTH_LIBS="${AUTH_LIBS} -lpam" AC_DEFINE(HAVE_PAM, 1, [Define if PAM support is included]) # On Linux, sigtimedwait() is in libc; on Solaris, it's in librt. have_timedwait=no AC_CHECK_LIB(c, sigtimedwait, [have_timedwait=yes]) if test "$have_timedwait" = no ; then AC_CHECK_LIB(rt, sigtimedwait, [AUTH_LIBS="${AUTH_LIBS} -lrt"]) fi AC_MSG_CHECKING(how to call pam_strerror) AC_CACHE_VAL(ac_cv_pam_strerror_args, [AC_TRY_COMPILE([#include #include #include ], [pam_handle_t *pamh = 0; char *s = pam_strerror(pamh, PAM_SUCCESS);], [ac_pam_strerror_args=2], [AC_TRY_COMPILE([#include #include #include ], [char *s = pam_strerror(PAM_SUCCESS);], [ac_pam_strerror_args=1], [ac_pam_strerror_args=0])]) ac_cv_pam_strerror_args=$ac_pam_strerror_args]) ac_pam_strerror_args=$ac_cv_pam_strerror_args if test "$ac_pam_strerror_args" = 1 ; then AC_MSG_RESULT(one argument) elif test "$ac_pam_strerror_args" = 2 ; then AC_DEFINE(PAM_STRERROR_TWO_ARGS, 1, [Define if pam_strerror takes two arguments]) AC_MSG_RESULT(two arguments) else AC_MSG_RESULT(unknown) fi fi AM_CONDITIONAL(HAVE_PAM, test x$have_pam = xyes) AC_SUBST(HAVE_PAM) AC_SUBST(AUTH_LIBS) AC_CHECK_HEADER(security/pam_modutil.h, [AC_DEFINE(HAVE_PAM_MODUTIL_H, [], "Have pam_modutil.h")]) AC_CHECK_HEADER(security/pam_ext.h, [AC_DEFINE(HAVE_PAM_EXT_H, [], "Have pam_ext.h")]) AC_CHECK_LIB(pam, pam_vsyslog, [AC_DEFINE(HAVE_PAM_VSYSLOG, [], "Have pam_vsyslog")]) AC_ARG_WITH(pam-module-dir, [ --with-pam-module-dir=[dirname] directory to install PAM security module]) if ! test -z "$with_pam_module_dir"; then PAM_MODULE_DIR=$with_pam_module_dir else PAM_MODULE_DIR="/lib/security" fi AC_SUBST(PAM_MODULE_DIR) AC_ARG_WITH(os-type, [ --with-os-type= distribution or OS (redhat/suse/gentoo/pardus/solaris)]) #### Check our operating system (distro-tweaks required) if test "z$with_os_type" = "z"; then AC_CHECK_FILE(/etc/redhat-release,distro_type="redhat") AC_CHECK_FILE(/etc/SuSE-release,distro_type="suse") AC_CHECK_FILE(/etc/gentoo-release,distro_type="gentoo") AC_CHECK_FILE(/etc/pardus-release,distro_type="pardus") if test "z$distro_type" = "z"; then echo "Linux distribution autodetection failed, specify the distribution to target using --with-os-type=" else operating_system=`echo ${distro_type} | tr '[[:upper:]]' '[[:lower:]]' ` fi fi #### Sort out OS (distro-tweaks required) if test x$with_os_type = x; then if test x$operating_system = xredhat ; then with_os_type=redhat elif test x$operating_system = xsuse ; then with_os_type=suse elif test x$operating_system = xgentoo ; then with_os_type=gentoo elif test x$operating_system = xpardus ; then with_os_type=pardus elif test x$operating_system = xsolaris ; then with_os_type=solaris elif test x$operating_system = xfreebsd ; then with_os_type=freebsd else with_os_type=unknown fi fi # (distro-tweaks required) AM_CONDITIONAL(OS_TYPE_UNKNOWN, test x$with_os_type = xunknown, [Running on unknown OS]) AM_CONDITIONAL(OS_TYPE_RED_HAT, test x$with_os_type = xredhat, [Running on Red Hat OS'es]) AM_CONDITIONAL(OS_TYPE_SUSE, test x$with_os_type = xsuse, [Running on SUSE OS'es]) AM_CONDITIONAL(OS_TYPE_GENTOO, test x$with_os_type = xgentoo, [Running on Gentoo OS'es]) AM_CONDITIONAL(OS_TYPE_PARDUS, test x$with_os_type = xpardus, [Running on Pardus OS'es]) AM_CONDITIONAL(OS_TYPE_SOLARIS, test x$with_os_type = xsolaris, [Running os Solaris OS'es]) AM_CONDITIONAL(OS_TYPE_FREEBSD, test x$with_os_type = xfreebsd, [Running on FreeBSD OS'es]) AC_ARG_WITH(pam-include, [ --with-pam-include= pam file to include]) #### Set up pam file to include (distro-tweaks required) if ! test -z "$with_pam_include"; then PAM_FILE_INCLUDE_AUTH=$with_pam_include PAM_FILE_INCLUDE_ACCOUNT=$with_pam_include PAM_FILE_INCLUDE_PASSWORD=$with_pam_include PAM_FILE_INCLUDE_SESSION=$with_pam_include elif test x$with_os_type = xredhat -o x$with_os_type = xgentoo -o x$with_os_type = xpardus ; then PAM_FILE_INCLUDE_AUTH=system-auth PAM_FILE_INCLUDE_ACCOUNT=system-auth PAM_FILE_INCLUDE_PASSWORD=system-auth PAM_FILE_INCLUDE_SESSION=system-auth elif test x$with_os_type = xsuse -o x$with_os_type = xsolaris ; then PAM_FILE_INCLUDE_AUTH=common-auth PAM_FILE_INCLUDE_ACCOUNT=common-account PAM_FILE_INCLUDE_PASSWORD=common-password PAM_FILE_INCLUDE_SESSION=common-session elif test x$with_os_type = xfreebsd ; then PAM_FILE_INCLUDE_AUTH=system PAM_FILE_INCLUDE_ACCOUNT=system PAM_FILE_INCLUDE_PASSWORD=system PAM_FILE_INCLUDE_SESSION=system else PAM_FILE_INCLUDE_AUTH=system-auth PAM_FILE_INCLUDE_ACCOUNT=system-auth PAM_FILE_INCLUDE_PASSWORD=system-auth PAM_FILE_INCLUDE_SESSION=system-auth fi AC_SUBST(PAM_FILE_INCLUDE_AUTH) AC_SUBST(PAM_FILE_INCLUDE_ACCOUNT) AC_SUBST(PAM_FILE_INCLUDE_PASSWORD) AC_SUBST(PAM_FILE_INCLUDE_SESSION) AC_DEFINE_UNQUOTED(PAM_FILE_INCLUDE_AUTH, "$PAM_FILE_INCLUDE_AUTH", [pam file auth]) AC_DEFINE_UNQUOTED(PAM_FILE_INCLUDE_ACCOUNT, "$PAM_FILE_INCLUDE_ACCOUNT", [pam file account]) AC_DEFINE_UNQUOTED(PAM_FILE_INCLUDE_PASSWORD, "$PAM_FILE_INCLUDE_PASSWORD", [pam file password]) AC_DEFINE_UNQUOTED(PAM_FILE_INCLUDE_SESSION, "$PAM_FILE_INCLUDE_SESSION", [pam file session]) dnl --------------------------------------------------------------------------- dnl - check OS dnl --------------------------------------------------------------------------- case "$host_os" in *linux*) ;; *solaris*) AC_DEFINE([HAVE_SOLARIS], 1, [Is this a Solaris system?]) ;; *freebsd*) AC_DEFINE([HAVE_FREEBSD], 1, [Is this a FreeBSD system?]) ;; esac # GObject introspection # AC_ARG_ENABLE([introspection], AS_HELP_STRING([--enable-introspection], [enable GObject introspection]), [], [enable_introspection=yes]) if test "x$enable_introspection" = xyes; then PKG_CHECK_MODULES([INTROSPECTION], [gobject-introspection-1.0 >= 0.6.2]) AC_DEFINE([ENABLE_INTROSPECTION], [1], [enable GObject introspection support]) AC_SUBST([G_IR_SCANNER], [$($PKG_CONFIG --variable=g_ir_scanner gobject-introspection-1.0)]) AC_SUBST([G_IR_COMPILER], [$($PKG_CONFIG --variable=g_ir_compiler gobject-introspection-1.0)]) AC_SUBST([G_IR_GENERATE], [$($PKG_CONFIG --variable=g_ir_generate gobject-introspection-1.0)]) #AC_SUBST([GIRDIR], [$($PKG_CONFIG --variable=girdir gobject-introspection-1.0)]) #AC_SUBST([GIRTYPELIBDIR], [$($PKG_CONFIG --variable=typelibdir gobject-introspection-1.0)]) GIRDIR=${datadir}/gir-1.0 GIRTYPELIBDIR=${libdir}/girepository-1.0 AC_SUBST(GIRDIR) AC_SUBST(GIRTYPELIBDIR) fi AM_CONDITIONAL([ENABLE_INTROSPECTION], [test "x$enable_introspection" = xyes]) AC_ARG_ENABLE([examples], AS_HELP_STRING([--enable-examples], [Build the example programs]),, [enable_examples=no]) AM_CONDITIONAL(BUILD_EXAMPLES, test "x$enable_examples" = "xyes") # ******************** # Internationalization # ******************** IT_PROG_INTLTOOL([0.40.0]) GETTEXT_PACKAGE=polkit-1 AC_SUBST([GETTEXT_PACKAGE]) AM_GLIB_GNU_GETTEXT AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE],["$GETTEXT_PACKAGE"],[gettext domain]) AC_OUTPUT([ Makefile actions/Makefile data/Makefile data/polkit-1 data/polkit-gobject-1.pc data/polkit-backend-1.pc data/polkit-agent-1.pc src/Makefile src/polkit/Makefile src/polkitbackend/Makefile src/polkitagent/Makefile src/polkitd/Makefile src/programs/Makefile src/examples/Makefile src/nullbackend/Makefile docs/version.xml docs/extensiondir.xml docs/Makefile docs/polkit/Makefile docs/man/Makefile po/Makefile.in ]) dnl ========================================================================== echo " polkit $VERSION ================= prefix: ${prefix} libdir: ${libdir} libexecdir: ${libexecdir} bindir: ${bindir} sbindir: ${sbindir} datadir: ${datadir} sysconfdir: ${sysconfdir} localstatedir: ${localstatedir} docdir: ${docdir} compiler: ${CC} cflags: ${CFLAGS} cppflags: ${CPPFLAGS} xsltproc: ${XSLTPROC} introspection: ${enable_introspection} Distribution/OS: ${with_os_type} authentication framework: ${POLKIT_AUTHFW} PAM support: ${have_pam}" if test "$have_pam" = yes ; then echo " PAM file auth: ${PAM_FILE_INCLUDE_AUTH} PAM file account: ${PAM_FILE_INCLUDE_ACCOUNT} PAM file password: ${PAM_FILE_INCLUDE_PASSWORD} PAM file session: ${PAM_FILE_INCLUDE_SESSION}" fi echo " Maintainer mode: ${USE_MAINTAINER_MODE} Building verbose mode: ${enable_verbose_mode} Building api docs: ${enable_gtk_doc} Building man pages: ${enable_man_pages} " echo "NOTE: The directory ${sysconfdir}/polkit-1/localauthority must be owned" echo " by root and have mode 700" echo echo "NOTE: The directory ${localstatedir}/lib/polkit-1 must be owned" echo " by root and have mode 700" echo echo "NOTE: The file ${libexecdir}/polkit-agent-helper-1 must be owned" echo " by root and have mode 4755 (setuid root binary)" echo echo "NOTE: The file ${bindir}/pkexec must be owned by root and" echo " have mode 4755 (setuid root binary)" echo