From 2dfca312a91631311c1cf7c090246cc8103de038 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 20 Aug 2013 19:43:54 +0200 Subject: mac80211: add a flag to indicate CCK support for HT clients brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath9k/init.c | 3 ++- drivers/net/wireless/ath/carl9170/main.c | 3 ++- drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 16f8b201642b..026a2a067b46 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -802,7 +802,8 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_SUPPORTS_RC_TABLE; + IEEE80211_HW_SUPPORTS_RC_TABLE | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES; if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 4a33c6e39ca2..349fa22a921a 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1860,7 +1860,8 @@ void *carl9170_alloc(size_t priv_size) IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_RC_TABLE | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES; if (!modparam_noht) { /* diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 1f80ea5e29dd..1b41c8eda12d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -6133,7 +6133,8 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; + IEEE80211_HW_REPORTS_TX_ACK_STATUS | + IEEE80211_HW_SUPPORTS_HT_CCK_RATES; /* * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices -- cgit v1.2.3 From b2fcc0aee58a3435566dd6d8501a0b355552f28b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 21 Aug 2013 10:18:19 +0200 Subject: iwl4965: fix rfkill set state regression My current 3.11 fix: commit 788f7a56fce1bcb2067b62b851a086fca48a0056 Author: Stanislaw Gruszka Date: Thu Aug 1 12:07:55 2013 +0200 iwl4965: reset firmware after rfkill off broke rfkill notification to user-space . I missed that bug, because I compiled without CONFIG_RFKILL, sorry about that. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index f2ed62e37340..7acf5ee23582 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -4464,9 +4464,9 @@ il4965_irq_tasklet(struct il_priv *il) set_bit(S_RFKILL, &il->status); } else { clear_bit(S_RFKILL, &il->status); - wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); il_force_reset(il, true); } + wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); handled |= CSR_INT_BIT_RF_KILL; } -- cgit v1.2.3 From d2e9fc141e2aa21f4b35ee27072d84e9aa6e2ba0 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 16 Aug 2013 21:39:40 +0200 Subject: ath9k_htc: Restore skb headroom when returning skb to mac80211 ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by: Marc Kleine-Budde Signed-off-by: Helmut Schaa Tested-by: Marc Kleine-Budde Signed-off-by: Marc Kleine-Budde Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index e602c9519709..c028df76b564 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -448,6 +448,7 @@ static void ath9k_htc_tx_process(struct ath9k_htc_priv *priv, struct ieee80211_conf *cur_conf = &priv->hw->conf; bool txok; int slot; + int hdrlen, padsize; slot = strip_drv_header(priv, skb); if (slot < 0) { @@ -504,6 +505,15 @@ send_mac80211: ath9k_htc_tx_clear_slot(priv, slot); + /* Remove padding before handing frame back to mac80211 */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + + padsize = hdrlen & 3; + if (padsize && skb->len > hdrlen + padsize) { + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); + } + /* Send status to mac80211 */ ieee80211_tx_status(priv->hw, skb); } -- cgit v1.2.3 From 19c361608ce3e73f352e323262f7e0a8264be3af Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 20 Aug 2013 10:05:59 +0530 Subject: ath9k: Enable PLL fix only for AR9340/AR9330 The PLL hang workaround is required only for AR9330 and AR9340. This issue was first observed on an AP121 and the WAR is enabled for AR9340 also (DB120 etc.), since it uses a PLL design identical to AR9330. This is not required for AR9485 and AR9550. Various bugs have been reported regarding this: https://bugzilla.redhat.com/show_bug.cgi?id=997217 https://bugzilla.redhat.com/show_bug.cgi?id=994648 Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 1737a3e33685..cb5a65553ac7 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -173,8 +173,7 @@ static void ath_restart_work(struct ath_softc *sc) { ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); - if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9485(sc->sc_ah) || - AR_SREV_9550(sc->sc_ah)) + if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9330(sc->sc_ah)) ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, msecs_to_jiffies(ATH_PLL_WORK_INTERVAL)); -- cgit v1.2.3