From d735d25e60fffeffc256fa5d59551dc92dc07e36 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 10 Dec 2014 01:57:07 +0100 Subject: leds: leds-gpio: Fix the "default-state" property check Commit a43f2cbbb009f9 ("leds: leds-gpio: Make use of device property API") caused a regression by reading the incorrect string for the "default-state" property. Fix the property string check to restore the original behaviour. Fixes: a43f2cbbb009 (leds: leds-gpio: Make use of device property API) Reported-by: Jean-Michel Hautbois Signed-off-by: Fabio Estevam Acked-by: Bryan Wu Signed-off-by: Rafael J. Wysocki --- drivers/leds/leds-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 868e6fc17cba..5fb4440127d9 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -203,7 +203,7 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev) fwnode_property_read_string(child, "linux,default-trigger", &led.default_trigger); - if (!fwnode_property_read_string(child, "linux,default_state", + if (!fwnode_property_read_string(child, "default-state", &state)) { if (!strcmp(state, "keep")) led.default_state = LEDS_GPIO_DEFSTATE_KEEP; -- cgit v1.2.3 From 7284a00f17290114d304528fc49aeee5c2b9b433 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 9 Dec 2014 11:18:51 +0530 Subject: PM / OPP: set new_opp->dev_opp to a valid dev_opp We find/allocate dev_opp after using its value to fill new_opp->dev_opp right now. Move this to a later point where dev_opp is valid. Fixes: a7470db6fec4 (PM / OPP don't match for existing OPPs when list is empty) Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 2d195f3a1998..c2020520b2bf 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -400,7 +400,6 @@ static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, mutex_lock(&dev_opp_list_lock); /* populate the opp table */ - new_opp->dev_opp = dev_opp; new_opp->rate = freq; new_opp->u_volt = u_volt; new_opp->available = true; @@ -460,6 +459,7 @@ static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, } list_add: + new_opp->dev_opp = dev_opp; list_add_rcu(&new_opp->node, head); mutex_unlock(&dev_opp_list_lock); -- cgit v1.2.3 From 2a6127d037de96e8add0b09e0200b331a4db54be Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 8 Dec 2014 13:46:18 +0530 Subject: PM / OPP: remove double calls to find_device_opp() By mistake we called find_device_opp() twice in of_free_opp_table(), fix it. Generated diff doesn't show the problem well and so here is the code snippet: void of_free_opp_table(struct device *dev) { struct device_opp *dev_opp = find_device_opp(dev); struct dev_pm_opp *opp, *tmp; /* Check for existing list for 'dev' */ dev_opp = find_device_opp(dev); ... } Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index c2020520b2bf..1bbef8e838e7 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -768,7 +768,7 @@ EXPORT_SYMBOL_GPL(of_init_opp_table); */ void of_free_opp_table(struct device *dev) { - struct device_opp *dev_opp = find_device_opp(dev); + struct device_opp *dev_opp; struct dev_pm_opp *opp, *tmp; /* Check for existing list for 'dev' */ -- cgit v1.2.3 From 1c6a662f898ecd1615d25fecb8098ea646720a7a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 10 Dec 2014 09:45:31 +0530 Subject: PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp' Somehow one of the instance of freeing resources failed to use kfree_rcu() and used kfree() instead. This might cause problems as the node might be referenced by readers under rcu locks and we must wait for the rcu grace period as well. While we are at it, also update comment over 'struct device_opp' to mention why we are waiting for both rcu and srcu grace periods. Fixes: 129eec55df6a (PM / OPP Introduce APIs to remove OPPs) Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 1bbef8e838e7..e1807268cbf2 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -84,7 +84,11 @@ struct dev_pm_opp { * * This is an internal data structure maintaining the link to opps attached to * a device. This structure is not meant to be shared to users as it is - * meant for book keeping and private to OPP library + * meant for book keeping and private to OPP library. + * + * Because the opp structures can be used from both rcu and srcu readers, we + * need to wait for the grace period of both of them before freeing any + * resources. And so we have used kfree_rcu() from within call_srcu() handlers. */ struct device_opp { struct list_head node; @@ -511,7 +515,7 @@ static void kfree_device_rcu(struct rcu_head *head) { struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head); - kfree(device_opp); + kfree_rcu(device_opp, rcu_head); } void __dev_pm_opp_remove(struct device_opp *dev_opp, struct dev_pm_opp *opp) -- cgit v1.2.3 From 86453b473b1f68c238a6901b26158b4ca3b369bc Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 10 Dec 2014 09:45:32 +0530 Subject: PM / OPP: Staticize __dev_pm_opp_remove() Its a local routine and need not be accessible outside of opp.c. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index e1807268cbf2..fa065d6e1731 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -518,7 +518,8 @@ static void kfree_device_rcu(struct rcu_head *head) kfree_rcu(device_opp, rcu_head); } -void __dev_pm_opp_remove(struct device_opp *dev_opp, struct dev_pm_opp *opp) +static void __dev_pm_opp_remove(struct device_opp *dev_opp, + struct dev_pm_opp *opp) { /* * Notify the changes in the availability of the operable -- cgit v1.2.3 From 29df0ee1b14ab5cdc83c225258f42600825f45b2 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 10 Dec 2014 09:45:33 +0530 Subject: PM / OPP: reuse find_device_opp() instead of duplicating code Reuse find_device_opp() in opp_set_availability() instead of duplicating code. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index fa065d6e1731..525ffb202d77 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -597,7 +597,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_remove); static int opp_set_availability(struct device *dev, unsigned long freq, bool availability_req) { - struct device_opp *tmp_dev_opp, *dev_opp = ERR_PTR(-ENODEV); + struct device_opp *dev_opp; struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); int r = 0; @@ -611,12 +611,7 @@ static int opp_set_availability(struct device *dev, unsigned long freq, mutex_lock(&dev_opp_list_lock); /* Find the device_opp */ - list_for_each_entry(tmp_dev_opp, &dev_opp_list, node) { - if (dev == tmp_dev_opp->dev) { - dev_opp = tmp_dev_opp; - break; - } - } + dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) { r = PTR_ERR(dev_opp); dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); -- cgit v1.2.3 From 07cce74a7b259cb90029530e9549bf1d9a1b1c34 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 10 Dec 2014 09:45:34 +0530 Subject: PM / OPP: handle allocation of device_opp in a separate routine Get the 'device_opp' allocation code into a separate routine to keep only the necessary part in dev_pm_opp_add_dynamic(). Also do s/sizeof(struct device_opp)/sizeof(*dev_opp) and remove the print message on kzalloc() failure as checkpatch warns for that. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 525ffb202d77..1150b9d2e012 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -386,6 +386,27 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, } EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); +static struct device_opp *add_device_opp(struct device *dev) +{ + struct device_opp *dev_opp; + + /* + * Allocate a new device OPP table. In the infrequent case where a new + * device is needed to be added, we pay this penalty. + */ + dev_opp = kzalloc(sizeof(*dev_opp), GFP_KERNEL); + if (!dev_opp) + return NULL; + + dev_opp->dev = dev; + srcu_init_notifier_head(&dev_opp->srcu_head); + INIT_LIST_HEAD(&dev_opp->opp_list); + + /* Secure the device list modification */ + list_add_rcu(&dev_opp->node, &dev_opp_list); + return dev_opp; +} + static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, unsigned long u_volt, bool dynamic) { @@ -412,27 +433,13 @@ static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, /* Check for existing list for 'dev' */ dev_opp = find_device_opp(dev); if (IS_ERR(dev_opp)) { - /* - * Allocate a new device OPP table. In the infrequent case - * where a new device is needed to be added, we pay this - * penalty. - */ - dev_opp = kzalloc(sizeof(struct device_opp), GFP_KERNEL); + dev_opp = add_device_opp(dev); if (!dev_opp) { mutex_unlock(&dev_opp_list_lock); kfree(new_opp); - dev_warn(dev, - "%s: Unable to create device OPP structure\n", - __func__); return -ENOMEM; } - dev_opp->dev = dev; - srcu_init_notifier_head(&dev_opp->srcu_head); - INIT_LIST_HEAD(&dev_opp->opp_list); - - /* Secure the device list modification */ - list_add_rcu(&dev_opp->node, &dev_opp_list); head = &dev_opp->opp_list; goto list_add; } -- cgit v1.2.3 From 6ce4184d0308888dd6ac2b6ab5f8ec0b2006092e Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Wed, 10 Dec 2014 09:45:35 +0530 Subject: PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic() This makes it less error prone and moves common resource deallocation at a single place. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c index 1150b9d2e012..d24dd614a0bd 100644 --- a/drivers/base/power/opp.c +++ b/drivers/base/power/opp.c @@ -413,6 +413,7 @@ static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, struct device_opp *dev_opp = NULL; struct dev_pm_opp *opp, *new_opp; struct list_head *head; + int ret; /* allocate new OPP node */ new_opp = kzalloc(sizeof(*new_opp), GFP_KERNEL); @@ -435,9 +436,8 @@ static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, if (IS_ERR(dev_opp)) { dev_opp = add_device_opp(dev); if (!dev_opp) { - mutex_unlock(&dev_opp_list_lock); - kfree(new_opp); - return -ENOMEM; + ret = -ENOMEM; + goto free_opp; } head = &dev_opp->opp_list; @@ -458,15 +458,13 @@ static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq, /* Duplicate OPPs ? */ if (new_opp->rate == opp->rate) { - int ret = opp->available && new_opp->u_volt == opp->u_volt ? + ret = opp->available && new_opp->u_volt == opp->u_volt ? 0 : -EEXIST; dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n", __func__, opp->rate, opp->u_volt, opp->available, new_opp->rate, new_opp->u_volt, new_opp->available); - mutex_unlock(&dev_opp_list_lock); - kfree(new_opp); - return ret; + goto free_opp; } list_add: @@ -480,6 +478,11 @@ list_add: */ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp); return 0; + +free_opp: + mutex_unlock(&dev_opp_list_lock); + kfree(new_opp); + return ret; } /** -- cgit v1.2.3 From aa4ea34da9e7a2bc0fb98f5add3e4e52872b7d45 Mon Sep 17 00:00:00 2001 From: Ethan Zhao Date: Tue, 9 Dec 2014 10:43:19 +0900 Subject: intel_pstate: add kernel parameter to force loading To force loading on Oracle Sun X86 servers, provide one kernel command line parameter intel_pstate = force For those who are aware of the risk of no power capping capabily working and try to get better performance with this driver. Signed-off-by: Ethan Zhao Tested-by: Alexey Kodanev Reviewed-by: Linda Knippers Acked-by: Kristen Carlson Accardi Signed-off-by: Rafael J. Wysocki --- Documentation/kernel-parameters.txt | 9 +++++++++ drivers/cpufreq/intel_pstate.c | 6 +++++- 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 5fdf714f40a0..d006bb22f3ca 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1446,6 +1446,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. disable Do not enable intel_pstate as the default scaling driver for the supported processors + force + Enable intel_pstate on systems that prohibit it by default + in favor of acpi-cpufreq. Forcing the intel_pstate driver + instead of acpi-cpufreq may disable platform features, such + as thermal controls and power capping, that rely on ACPI + P-States information being indicated to OSPM and therefore + should be used with caution. This option does not work with + processors that aren't supported by the intel_pstate driver + or on platforms that use pcc-cpufreq instead of acpi-cpufreq. no_hwp Do not enable hardware P state control (HWP) if available. diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 1405b393c93d..0e841eecb743 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -948,6 +948,7 @@ static struct cpufreq_driver intel_pstate_driver = { static int __initdata no_load; static int __initdata no_hwp; +static unsigned int force_load; static int intel_pstate_msrs_not_valid(void) { @@ -1094,7 +1095,8 @@ static bool intel_pstate_platform_pwr_mgmt_exists(void) case PSS: return intel_pstate_no_acpi_pss(); case PPC: - return intel_pstate_has_acpi_ppc(); + return intel_pstate_has_acpi_ppc() && + (!force_load); } } @@ -1175,6 +1177,8 @@ static int __init intel_pstate_setup(char *str) no_load = 1; if (!strcmp(str, "no_hwp")) no_hwp = 1; + if (!strcmp(str, "force")) + force_load = 1; return 0; } early_param("intel_pstate", intel_pstate_setup); -- cgit v1.2.3 From e0d4c8f80804000eadc106bc5167b96fc6231d98 Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 10 Dec 2014 12:39:38 -0800 Subject: intel_pstate: Add a few comments Add a few comments in the code which calculates busyness to clarify parts of the algorithm. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 0e841eecb743..742eefba12c2 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -199,7 +199,14 @@ static signed int pid_calc(struct _pid *pid, int32_t busy) pid->integral += fp_error; - /* limit the integral term */ + /* + * We limit the integral here so that it will never + * get higher than 30. This prevents it from becoming + * too large an input over long periods of time and allows + * it to get factored out sooner. + * + * The value of 30 was chosen through experimentation. + */ integral_limit = int_tofp(30); if (pid->integral > integral_limit) pid->integral = integral_limit; @@ -616,6 +623,11 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) if (limits.no_turbo || limits.turbo_disabled) max_perf = cpu->pstate.max_pstate; + /* + * performance can be limited by user through sysfs, by cpufreq + * policy, or by cpu specific default values determined through + * experimentation. + */ max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf)); *max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate, cpu->pstate.turbo_pstate); @@ -717,11 +729,29 @@ static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu) u32 duration_us; u32 sample_time; + /* + * core_busy is the ratio of actual performance to max + * max_pstate is the max non turbo pstate available + * current_pstate was the pstate that was requested during + * the last sample period. + * + * We normalize core_busy, which was our actual percent + * performance to what we requested during the last sample + * period. The result will be a percentage of busy at a + * specified pstate. + */ core_busy = cpu->sample.core_pct_busy; max_pstate = int_tofp(cpu->pstate.max_pstate); current_pstate = int_tofp(cpu->pstate.current_pstate); core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate)); + /* + * Since we have a deferred timer, it will not fire unless + * we are in C0. So, determine if the actual elapsed time + * is significantly greater (3x) than our sample interval. If it + * is, then we were idle for a long enough period of time + * to adjust our busyness. + */ sample_time = pid_params.sample_rate_ms * USEC_PER_MSEC; duration_us = (u32) ktime_us_delta(cpu->sample.time, cpu->last_sample_time); -- cgit v1.2.3 From bbb16fef19122ec9f20fb865c45375e12f85d2a1 Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Tue, 9 Dec 2014 16:15:40 -0800 Subject: ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devices The _ART (Active Cooling Relationship Table), specifies relationship among heat generating sources to a target active cooling device like fan. The _ART table refers to actual bus id name for specifying relationship. Naming "Fan" is not enough as name in the _ART table can change on every platform, to establish relationship for user space thermal controllers. Signed-off-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki --- drivers/acpi/fan.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index caf9b76b7ef8..7a36f02598a6 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -325,6 +325,7 @@ static int acpi_fan_probe(struct platform_device *pdev) struct thermal_cooling_device *cdev; struct acpi_fan *fan; struct acpi_device *device = ACPI_COMPANION(&pdev->dev); + char *name; fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL); if (!fan) { @@ -346,7 +347,12 @@ static int acpi_fan_probe(struct platform_device *pdev) } } - cdev = thermal_cooling_device_register("Fan", device, + if (!strncmp(pdev->name, "PNP0C0B", strlen("PNP0C0B"))) + name = "Fan"; + else + name = acpi_device_bid(device); + + cdev = thermal_cooling_device_register(name, device, &fan_cooling_ops); if (IS_ERR(cdev)) { result = PTR_ERR(cdev); -- cgit v1.2.3 From 80167a24a27449c06fbbfb1b0f4a5b965c41b428 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 12 Dec 2014 22:48:44 +0100 Subject: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG Two _DEP-related failure messages are printed as dev_err() which is unnecessary and annoying. Use dev_dbg() to print them. While at it, one of the messages should actually say it is related to _DEP, so modify it to that effect. Fixes: 40e7fcb19293 (ACPI: Add _DEP support to fix battery issue on Asus T100TA) Reported-by: Linus Torvalds Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 00189ad63c8f..d838b2f83e21 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2107,7 +2107,7 @@ static void acpi_device_dep_initialize(struct acpi_device *adev) status = acpi_evaluate_reference(adev->handle, "_DEP", NULL, &dep_devices); if (ACPI_FAILURE(status)) { - dev_err(&adev->dev, "Failed to evaluate _DEP.\n"); + dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n"); return; } @@ -2117,7 +2117,7 @@ static void acpi_device_dep_initialize(struct acpi_device *adev) status = acpi_get_object_info(dep_devices.handles[i], &info); if (ACPI_FAILURE(status)) { - dev_err(&adev->dev, "Error reading device info\n"); + dev_dbg(&adev->dev, "Error reading _DEP device info\n"); continue; } -- cgit v1.2.3 From c48cf1b9dd8f01358e5385d40fb58061f32313a7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 12 Dec 2014 22:51:01 +0100 Subject: ACPI / utils: Drop error messages from acpi_evaluate_reference() Some of the error messages printed by acpi_evaluate_reference() with the KERN_ERR priority should really be debug messages, but then they would be redundant, because acpi_util_eval_error() is called too at the same spots (except for one). Drop the kernel messages from there entirely and leave the acpi_util_eval_error() to handle the debug printing. In one case, replace the kernel message with a call to acpi_util_eval_error(). Signed-off-by: Rafael J. Wysocki --- drivers/acpi/utils.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 371ac12d25b1..5512309d167b 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -347,22 +347,16 @@ acpi_evaluate_reference(acpi_handle handle, package = buffer.pointer; if ((buffer.length == 0) || !package) { - printk(KERN_ERR PREFIX "No return object (len %X ptr %p)\n", - (unsigned)buffer.length, package); status = AE_BAD_DATA; acpi_util_eval_error(handle, pathname, status); goto end; } if (package->type != ACPI_TYPE_PACKAGE) { - printk(KERN_ERR PREFIX "Expecting a [Package], found type %X\n", - package->type); status = AE_BAD_DATA; acpi_util_eval_error(handle, pathname, status); goto end; } if (!package->package.count) { - printk(KERN_ERR PREFIX "[Package] has zero elements (%p)\n", - package); status = AE_BAD_DATA; acpi_util_eval_error(handle, pathname, status); goto end; @@ -381,17 +375,13 @@ acpi_evaluate_reference(acpi_handle handle, if (element->type != ACPI_TYPE_LOCAL_REFERENCE) { status = AE_BAD_DATA; - printk(KERN_ERR PREFIX - "Expecting a [Reference] package element, found type %X\n", - element->type); acpi_util_eval_error(handle, pathname, status); break; } if (!element->reference.handle) { - printk(KERN_WARNING PREFIX "Invalid reference in" - " package %s\n", pathname); status = AE_NULL_ENTRY; + acpi_util_eval_error(handle, pathname, status); break; } /* Get the acpi_handle. */ -- cgit v1.2.3 From 175f8e2650f7ca6b33d338be3ccc1c00e89594ea Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 12 Dec 2014 22:51:58 +0100 Subject: ACPI / PM: Do not disable wakeup GPEs that have not been enabled In some cases acpi_device_wakeup() may be called to ensure wakeup power to be off for a given device even though that device's wakeup GPE has not been enabled so far. It calls acpi_disable_gpe() on a GPE that's not enabled and this causes ACPICA to return the AE_LIMIT status code from that call which then is reported as an error by the ACPICA's debug facilities (if enabled). This may lead to a fair amount of confusion, so introduce a new ACPI device wakeup flag to store the wakeup GPE status and avoid disabling wakeup GPEs that have not been enabled. Reported-and-tested-by: Venkat Raghavulu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/device_pm.c | 12 ++++++++++-- include/acpi/acpi_bus.h | 1 + 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 076af8149566..e6ff33ecd784 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -680,13 +680,21 @@ static int acpi_device_wakeup(struct acpi_device *adev, u32 target_state, if (error) return error; + if (adev->wakeup.flags.enabled) + return 0; + res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number); - if (ACPI_FAILURE(res)) { + if (ACPI_SUCCESS(res)) { + adev->wakeup.flags.enabled = 1; + } else { acpi_disable_wakeup_device_power(adev); return -EIO; } } else { - acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number); + if (adev->wakeup.flags.enabled) { + acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number); + adev->wakeup.flags.enabled = 0; + } acpi_disable_wakeup_device_power(adev); } return 0; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index f34a0835aa4f..8de31d472fad 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -312,6 +312,7 @@ struct acpi_device_wakeup_flags { u8 valid:1; /* Can successfully enable wakeup? */ u8 run_wake:1; /* Run-Wake GPE devices */ u8 notifier_present:1; /* Wake-up notify handler has been installed */ + u8 enabled:1; /* Enabled for wakeup */ }; struct acpi_device_wakeup_context { -- cgit v1.2.3 From ec83305032d9b29e439a9e56ca3644f97f638565 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:41:15 +0100 Subject: spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/. Signed-off-by: Rafael J. Wysocki Acked-by: Mark Brown --- drivers/spi/spi-coldfire-qspi.c | 2 +- drivers/spi/spi-orion.c | 2 +- drivers/spi/spi-pxa2xx.c | 2 +- drivers/spi/spi-qup.c | 4 ++-- drivers/spi/spi-rockchip.c | 4 ++-- drivers/spi/spi-s3c64xx.c | 4 ++-- 6 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index e2fa628e55e7..41b5dc4445f6 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -491,7 +491,7 @@ static int mcfqspi_resume(struct device *dev) } #endif -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int mcfqspi_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index c76b7d7879df..9c217abeb65d 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -523,7 +523,7 @@ static int orion_spi_remove(struct platform_device *pdev) MODULE_ALIAS("platform:" DRIVER_NAME); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int orion_spi_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 9e9e0f971e6c..429ff7eb1414 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1307,7 +1307,7 @@ static int pxa2xx_spi_resume(struct device *dev) } #endif -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int pxa2xx_spi_runtime_suspend(struct device *dev) { struct driver_data *drv_data = dev_get_drvdata(dev); diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 9f83d2950748..3d0ab0a00466 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -646,7 +646,7 @@ error: return ret; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int spi_qup_pm_suspend_runtime(struct device *device) { struct spi_master *master = dev_get_drvdata(device); @@ -672,7 +672,7 @@ static int spi_qup_pm_resume_runtime(struct device *device) writel_relaxed(config, controller->base + QUP_CONFIG); return 0; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP static int spi_qup_suspend(struct device *device) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 87bc16f491f0..29ab9a106a5f 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -801,7 +801,7 @@ static int rockchip_spi_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int rockchip_spi_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -829,7 +829,7 @@ static int rockchip_spi_runtime_resume(struct device *dev) return ret; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static const struct dev_pm_ops rockchip_spi_pm = { SET_SYSTEM_SLEEP_PM_OPS(rockchip_spi_suspend, rockchip_spi_resume) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 480133ee1eb3..ec74e01e8ee1 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1266,7 +1266,7 @@ static int s3c64xx_spi_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int s3c64xx_spi_runtime_suspend(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); @@ -1296,7 +1296,7 @@ static int s3c64xx_spi_runtime_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static const struct dev_pm_ops s3c64xx_spi_pm = { SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume) -- cgit v1.2.3 From d39fe4e557530f7c8368552074e93c3ae4b9c33f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:41:36 +0100 Subject: tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/tty/. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 2 +- drivers/tty/serial/8250/8250_mtk.c | 2 +- drivers/tty/serial/mfd.c | 7 ++----- drivers/tty/serial/msm_serial_hs.c | 2 +- drivers/tty/serial/omap-serial.c | 2 +- 5 files changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index beea6ca73ee5..ed45a14872cb 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -489,7 +489,7 @@ static int dw8250_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int dw8250_runtime_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index de7aae523b37..b7f1dc64fed5 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -244,7 +244,7 @@ static int mtk8250_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int mtk8250_runtime_suspend(struct device *dev) { struct mtk8250_data *data = dev_get_drvdata(dev); diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index 445799dc9846..4a5c956f4746 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -1252,12 +1252,7 @@ static int serial_hsu_resume(struct pci_dev *pdev) } return 0; } -#else -#define serial_hsu_suspend NULL -#define serial_hsu_resume NULL -#endif -#ifdef CONFIG_PM_RUNTIME static int serial_hsu_runtime_idle(struct device *dev) { pm_schedule_suspend(dev, 500); @@ -1274,6 +1269,8 @@ static int serial_hsu_runtime_resume(struct device *dev) return 0; } #else +#define serial_hsu_suspend NULL +#define serial_hsu_resume NULL #define serial_hsu_runtime_idle NULL #define serial_hsu_runtime_suspend NULL #define serial_hsu_runtime_resume NULL diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 48e94961a9e5..df68f334ab8b 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -1792,7 +1792,7 @@ static void __exit msm_serial_hs_exit(void) } module_exit(msm_serial_hs_exit); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int msm_hs_runtime_idle(struct device *dev) { /* diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 18c30cabe27f..c44ec5fb2994 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1799,7 +1799,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) } } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static void serial_omap_restore_context(struct uart_omap_port *up) { if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) -- cgit v1.2.3 From 739808c99296bd2909908d6884407ca73ce69569 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:42:04 +0100 Subject: video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. The alternative of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME may be replaced with CONFIG_PM too. Make these changes in 2 files under drivers/video/. Signed-off-by: Rafael J. Wysocki Acked-by: Tomi Valkeinen Acked-by: Jingoo Han --- drivers/video/fbdev/s3c-fb.c | 2 +- drivers/video/fbdev/sh_mobile_meram.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/fbdev/s3c-fb.c b/drivers/video/fbdev/s3c-fb.c index b33abb0a433d..57f88fd0ba9e 100644 --- a/drivers/video/fbdev/s3c-fb.c +++ b/drivers/video/fbdev/s3c-fb.c @@ -1630,7 +1630,7 @@ static int s3c_fb_resume(struct device *dev) } #endif -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int s3c_fb_runtime_suspend(struct device *dev) { struct s3c_fb *sfb = dev_get_drvdata(dev); diff --git a/drivers/video/fbdev/sh_mobile_meram.c b/drivers/video/fbdev/sh_mobile_meram.c index a297de5cc859..239453942706 100644 --- a/drivers/video/fbdev/sh_mobile_meram.c +++ b/drivers/video/fbdev/sh_mobile_meram.c @@ -569,7 +569,7 @@ EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_update); * Power management */ -#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) +#ifdef CONFIG_PM static int sh_mobile_meram_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -612,7 +612,7 @@ static int sh_mobile_meram_resume(struct device *dev) meram_write_reg(priv->base, common_regs[i], priv->regs[i]); return 0; } -#endif /* CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops, sh_mobile_meram_suspend, -- cgit v1.2.3 From 7ba37053ebcc59e96b2677d42a2ee08b6c217d25 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:42:12 +0100 Subject: phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/phy/. Signed-off-by: Rafael J. Wysocki Acked-by: Kishon Vijay Abraham I --- drivers/phy/phy-omap-usb2.c | 2 +- drivers/phy/phy-ti-pipe3.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index f091576b6449..48990e735759 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -322,7 +322,7 @@ static int omap_usb2_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int omap_usb2_runtime_suspend(struct device *dev) { diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index ab1e22d9a1e8..7c66922b2f93 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -423,7 +423,7 @@ static int ti_pipe3_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int ti_pipe3_runtime_suspend(struct device *dev) { -- cgit v1.2.3 From 641d334b29429f1d191b4bb4295f7a259b1660cc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:42:18 +0100 Subject: sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under sound/. Signed-off-by: Rafael J. Wysocki Acked-by: Takashi Iwai Acked-by: Nicolin Chen Acked-by: Brian Austin Acked-by: Mark Brown --- sound/pci/hda/hda_controller.c | 2 +- sound/pci/hda/hda_intel.c | 5 +---- sound/soc/codecs/cs35l32.c | 2 +- sound/soc/codecs/cs42xx8.c | 2 +- sound/soc/codecs/max98090.c | 2 +- sound/soc/codecs/pcm512x.c | 2 +- sound/soc/codecs/tas2552.c | 4 ++-- sound/soc/codecs/wm2200.c | 2 +- sound/soc/codecs/wm5100.c | 2 +- sound/soc/codecs/wm8962.c | 2 +- sound/soc/fsl/fsl_asrc.c | 4 ++-- sound/soc/samsung/i2s.c | 4 ++-- 12 files changed, 15 insertions(+), 18 deletions(-) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 8337645aa7a5..8276a743e22e 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -1676,7 +1676,7 @@ irqreturn_t azx_interrupt(int irq, void *dev_id) u8 sd_status; int i; -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME) if (!pm_runtime_active(chip->card->dev)) return IRQ_NONE; diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 48b6c5a3884f..243ffad40605 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -857,7 +857,7 @@ static int azx_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP || SUPPORT_VGA_SWITCHEROO */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int azx_runtime_suspend(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); @@ -955,9 +955,6 @@ static int azx_runtime_idle(struct device *dev) return 0; } -#endif /* CONFIG_PM_RUNTIME */ - -#ifdef CONFIG_PM static const struct dev_pm_ops azx_pm = { SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume) SET_RUNTIME_PM_OPS(azx_runtime_suspend, azx_runtime_resume, azx_runtime_idle) diff --git a/sound/soc/codecs/cs35l32.c b/sound/soc/codecs/cs35l32.c index c125925da92e..ec55c590afd0 100644 --- a/sound/soc/codecs/cs35l32.c +++ b/sound/soc/codecs/cs35l32.c @@ -550,7 +550,7 @@ static int cs35l32_i2c_remove(struct i2c_client *i2c_client) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int cs35l32_runtime_suspend(struct device *dev) { struct cs35l32_private *cs35l32 = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/cs42xx8.c b/sound/soc/codecs/cs42xx8.c index 02b1520ae0bc..670ebfe12903 100644 --- a/sound/soc/codecs/cs42xx8.c +++ b/sound/soc/codecs/cs42xx8.c @@ -537,7 +537,7 @@ err_enable: } EXPORT_SYMBOL_GPL(cs42xx8_probe); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int cs42xx8_runtime_resume(struct device *dev) { struct cs42xx8_priv *cs42xx8 = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index 1229554f1464..88a65da3c53c 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2492,7 +2492,7 @@ static int max98090_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int max98090_runtime_resume(struct device *dev) { struct max98090_priv *max98090 = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 0c8aefab404c..e5f2fb884bf3 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -517,7 +517,7 @@ void pcm512x_remove(struct device *dev) } EXPORT_SYMBOL_GPL(pcm512x_remove); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int pcm512x_suspend(struct device *dev) { struct pcm512x_priv *pcm512x = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c index f039dc825971..0fde5df40f4d 100644 --- a/sound/soc/codecs/tas2552.c +++ b/sound/soc/codecs/tas2552.c @@ -115,7 +115,7 @@ static const struct snd_soc_dapm_route tas2552_audio_map[] = { {"ClassD", NULL, "PLL"}, }; -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static void tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown) { u8 cfg1_reg; @@ -264,7 +264,7 @@ static int tas2552_mute(struct snd_soc_dai *dai, int mute) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int tas2552_runtime_suspend(struct device *dev) { struct tas2552_data *tas2552 = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index cdea9d9c1631..15599845a660 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -2440,7 +2440,7 @@ static int wm2200_i2c_remove(struct i2c_client *i2c) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int wm2200_runtime_suspend(struct device *dev) { struct wm2200_priv *wm2200 = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index a01ad629ed61..b80970dc2d2f 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2664,7 +2664,7 @@ static int wm5100_i2c_remove(struct i2c_client *i2c) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int wm5100_runtime_suspend(struct device *dev) { struct wm5100_priv *wm5100 = dev_get_drvdata(dev); diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 9077411e62ce..77ea0012afca 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3782,7 +3782,7 @@ static int wm8962_i2c_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int wm8962_runtime_resume(struct device *dev) { struct wm8962_priv *wm8962 = dev_get_drvdata(dev); diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index 9deabdd2b1a2..026a80117540 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -928,7 +928,7 @@ static int fsl_asrc_probe(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int fsl_asrc_runtime_resume(struct device *dev) { struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); @@ -954,7 +954,7 @@ static int fsl_asrc_runtime_suspend(struct device *dev) return 0; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ #ifdef CONFIG_PM_SLEEP static int fsl_asrc_suspend(struct device *dev) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 9d513473b300..de8b13270bab 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1113,7 +1113,7 @@ static inline const struct samsung_i2s_dai_data *samsung_i2s_get_driver_data( platform_get_device_id(pdev)->driver_data; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int i2s_runtime_suspend(struct device *dev) { struct i2s_dai *i2s = dev_get_drvdata(dev); @@ -1131,7 +1131,7 @@ static int i2s_runtime_resume(struct device *dev) return 0; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static int samsung_i2s_probe(struct platform_device *pdev) { -- cgit v1.2.3 From bf7c5449e6240c510df5fafcffd8b7bfd9f8e831 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:42:49 +0100 Subject: ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere in the code under arch/arm/ (the defconfig files will be modified later). Signed-off-by: Rafael J. Wysocki Acked-by: Nishanth Menon Acked-by: Sekhar Nori Acked-by: Santosh Shilimkar --- arch/arm/kernel/perf_event.c | 2 +- arch/arm/mach-davinci/pm_domain.c | 2 +- arch/arm/mach-keystone/pm_domain.c | 2 +- arch/arm/mach-omap1/pm_bus.c | 4 ++-- arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/omap_device.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index e34934f63a49..f7c65adaa428 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -484,7 +484,7 @@ static void armpmu_disable(struct pmu *pmu) armpmu->stop(armpmu); } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int armpmu_runtime_resume(struct device *dev) { struct arm_pmu_platdata *plat = dev_get_platdata(dev); diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index 6b98413cebd6..641edc313938 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -14,7 +14,7 @@ #include #include -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int davinci_pm_runtime_suspend(struct device *dev) { int ret; diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index ca79ddac38bc..ef6041e7e675 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -19,7 +19,7 @@ #include #include -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int keystone_pm_runtime_suspend(struct device *dev) { int ret; diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 3f2d39672393..c40e209de65c 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -21,7 +21,7 @@ #include "soc.h" -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int omap1_pm_runtime_suspend(struct device *dev) { int ret; @@ -59,7 +59,7 @@ static struct dev_pm_domain default_pm_domain = { #define OMAP1_PM_DOMAIN (&default_pm_domain) #else #define OMAP1_PM_DOMAIN NULL -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static struct pm_clk_notifier_block platform_bus_notifier = { .pm_domain = OMAP1_PM_DOMAIN, diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4fc838354e31..a1bd6affb508 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -361,7 +361,7 @@ static void __init omap_hwmod_init_postsetup(void) u8 postsetup_state; /* Set the default postsetup state for all hwmods */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM postsetup_state = _HWMOD_STATE_IDLE; #else postsetup_state = _HWMOD_STATE_ENABLED; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 8c58b71c2727..be9541e18650 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -588,7 +588,7 @@ odbs_exit: return ERR_PTR(ret); } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int _od_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); -- cgit v1.2.3 From 1b3e3aa6c5c7a86ae09459f5734283b991dd7939 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 00:44:04 +0100 Subject: PM / Kconfig: Replace PM_RUNTIME with PM in dependencies After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so Kconfig options depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace PM_RUNTIME with PM in Kconfig dependencies throughout the tree. Signed-off-by: Rafael J. Wysocki Acked-by: Felipe Balbi Acked-by: Greg Kroah-Hartman Acked-by: Tejun Heo --- arch/arm/mach-exynos/Kconfig | 2 +- arch/ia64/Kconfig | 2 +- drivers/ata/Kconfig | 2 +- drivers/media/platform/Kconfig | 2 +- drivers/media/platform/s5p-tv/Kconfig | 2 +- drivers/staging/gdm72xx/Kconfig | 2 +- drivers/usb/core/Kconfig | 2 +- drivers/usb/phy/Kconfig | 4 ++-- drivers/usb/storage/Kconfig | 2 +- 9 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b9e3f1c61baf..bb9c56e44a7b 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -21,7 +21,7 @@ menuconfig ARCH_EXYNOS select HAVE_S3C_RTC if RTC_CLASS select PINCTRL select PINCTRL_EXYNOS - select PM_GENERIC_DOMAINS if PM_RUNTIME + select PM_GENERIC_DOMAINS if PM select S5P_DEV_MFC select SRAM select MFD_SYSCON diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 536d13b0bea6..ce9531ed44db 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -232,7 +232,7 @@ config IA64_SGI_UV config IA64_HP_SIM bool "Ski-simulator" select SWIOTLB - depends on !PM_RUNTIME + depends on !PM endchoice diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cd4cccbfd2ab..a3a13605a9c4 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -61,7 +61,7 @@ config ATA_ACPI config SATA_ZPODD bool "SATA Zero Power Optical Disc Drive (ZPODD) support" - depends on ATA_ACPI && PM_RUNTIME + depends on ATA_ACPI && PM default n help This option adds support for SATA Zero Power Optical Disc diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 3aac88f1d54a..1412c3edd5a2 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -112,7 +112,7 @@ config VIDEO_OMAP3_DEBUG config VIDEO_S3C_CAMIF tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver" depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API - depends on PM_RUNTIME + depends on PM depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG diff --git a/drivers/media/platform/s5p-tv/Kconfig b/drivers/media/platform/s5p-tv/Kconfig index beb180e71ba0..5a1835dd65e8 100644 --- a/drivers/media/platform/s5p-tv/Kconfig +++ b/drivers/media/platform/s5p-tv/Kconfig @@ -8,7 +8,7 @@ config VIDEO_SAMSUNG_S5P_TV bool "Samsung TV driver for S5P platform" - depends on PM_RUNTIME + depends on PM depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST default n ---help--- diff --git a/drivers/staging/gdm72xx/Kconfig b/drivers/staging/gdm72xx/Kconfig index 5836503caa7b..bf11a7fbfc51 100644 --- a/drivers/staging/gdm72xx/Kconfig +++ b/drivers/staging/gdm72xx/Kconfig @@ -53,7 +53,7 @@ if WIMAX_GDM72XX_USB config WIMAX_GDM72XX_USB_PM bool "Enable power management support" - depends on PM_RUNTIME + depends on PM help Enable USB power management in order to reduce power consumption while the interface is not in use. diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 9cfda6a72194..cc0ced08bae2 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -43,7 +43,7 @@ config USB_DYNAMIC_MINORS config USB_OTG bool "OTG support" - depends on PM_RUNTIME + depends on PM default n help The most notable feature of USB OTG is support for a diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 0cd1f44f0ee8..c6d0c8e745b9 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -20,7 +20,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM_RUNTIME + depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM select USB_OTG select USB_PHY help @@ -153,7 +153,7 @@ config USB_MSM_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME + depends on USB_EHCI_MV && USB_MV_UDC && PM select USB_OTG select USB_PHY help diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 715f299af6ea..ec84758f0e23 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -41,7 +41,7 @@ config USB_STORAGE_REALTEK config REALTEK_AUTOPM bool "Realtek Card Reader autosuspend support" - depends on USB_STORAGE_REALTEK && PM_RUNTIME + depends on USB_STORAGE_REALTEK && PM default y config USB_STORAGE_DATAFAB -- cgit v1.2.3 From c3cb6ba415169d66ed29521d249742e667c80697 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Sat, 13 Dec 2014 00:44:11 +0100 Subject: mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro The currently used SET_PM_RUNTIME_PM_OPS() macro is defined to the SET_RUNTIME_PM_OPS() macro. Convert to the later, since that's the proper one to use. Signed-off-by: Ludovic Desroches Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- drivers/mmc/host/atmel-mci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 62aba9af19f4..03d7c7521d97 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2561,7 +2561,7 @@ static int atmci_runtime_resume(struct device *dev) static const struct dev_pm_ops atmci_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) - SET_PM_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL) + SET_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL) }; static struct platform_driver atmci_driver = { -- cgit v1.2.3 From 40bd62c6194bdee1bc6652b3b0aa28e34883f603 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Thu, 11 Dec 2014 11:20:36 +0100 Subject: PM: Remove the SET_PM_RUNTIME_PM_OPS() macro There're now no users left of the SET_PM_RUNTIME_PM_OPS() macro, since all have converted to use the SET_RUNTIME_PM_OPS() macro instead, so let's remove it. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- include/linux/pm.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/pm.h b/include/linux/pm.h index 66a656eb335b..8b5976364619 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -351,8 +351,6 @@ struct dev_pm_ops { #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) #endif -#define SET_PM_RUNTIME_PM_OPS SET_RUNTIME_PM_OPS - /* * Use this if you want to use the same suspend and resume callbacks for suspend * to RAM and hibernation. -- cgit v1.2.3 From 16394fd031142c9ef31e2eb8cd8c4bd07e258bac Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 01:54:59 +0100 Subject: x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in x86/kernel/apic/io_apic.c. Acked-by: Thomas Gleixner Signed-off-by: Rafael J. Wysocki --- arch/x86/kernel/apic/io_apic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7ffe0a2b870f..a6745e756729 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -3968,7 +3968,7 @@ bool mp_should_keep_irq(struct device *dev) { if (dev->power.is_prepared) return true; -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM if (dev->power.runtime_status == RPM_SUSPENDING) return true; #endif -- cgit v1.2.3 From 798bc6d8d50ff26a5033be0cb9c63727943b49fe Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Dec 2014 02:23:30 +0100 Subject: tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so files that are build conditionally if CONFIG_PM_RUNTIME is set may now be build if CONFIG_PM is set. Replace CONFIG_PM_RUNTIME with CONFIG_PM in kernel/trace/Makefile for this reason. Signed-off-by: Rafael J. Wysocki Acked-by: Steven Rostedt Date: Sun, 14 Dec 2014 09:06:37 -0500 Subject: Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" This reverts commit 16b7c275c055cc36218404b5d147be7f76575087. My previous commit 16b7c275c055 ("tools: cpupower: fix return checks for sysfs_get_idlestate_count()") was not correct. After looking at the changelog for cpupower I noticed that Thomas had changed the return of sysfs_get_idlestate_count() to an unsigned int to simplify the code. The problem is really that both he (in his original change) and I (in my new change) missed the obvious that sysfs_get_idlestate_count() can't return -ENODEV. It should just return 0 for "no c-states". Fixes: 16b7c275c055 (tools: cpupower: fix return checks for ...) Signed-off-by: Prarit Bhargava Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/cpuidle-info.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c index 458d69b444ad..75e66de7e7a7 100644 --- a/tools/power/cpupower/utils/cpuidle-info.c +++ b/tools/power/cpupower/utils/cpuidle-info.c @@ -22,13 +22,13 @@ static void cpuidle_cpu_output(unsigned int cpu, int verbose) { - int idlestates, idlestate; + unsigned int idlestates, idlestate; char *tmp; printf(_ ("Analyzing CPU %d:\n"), cpu); idlestates = sysfs_get_idlestate_count(cpu); - if (idlestates < 1) { + if (idlestates == 0) { printf(_("CPU %u: No idle states\n"), cpu); return; } @@ -100,10 +100,10 @@ static void cpuidle_general_output(void) static void proc_cpuidle_cpu_output(unsigned int cpu) { long max_allowed_cstate = 2000000000; - int cstate, cstates; + unsigned int cstate, cstates; cstates = sysfs_get_idlestate_count(cpu); - if (cstates < 1) { + if (cstates == 0) { printf(_("CPU %u: No C-states info\n"), cpu); return; } -- cgit v1.2.3 From 1741acea75ea51ce709304a26baf72e1e99b8f3a Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Mon, 15 Dec 2014 08:47:52 +0800 Subject: ACPI / EC: Fix unexpected ec_remove_handlers() invocations The ec_remove_handlers() is invoked without checking EC_FLAGS_HANDLERS_INSTALLED, this patch enhances this check to avoid issues that acpi_disable_gpe() is invoked unexpectedly to reduce the GPE runtime count. This may happen when the EC handler installation failed on some platforms. Reported-by: Venkat Raghavulu Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5f9b74b9b71f..1b5853f384e2 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -844,6 +844,8 @@ static int ec_install_handlers(struct acpi_ec *ec) static void ec_remove_handlers(struct acpi_ec *ec) { + if (!test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags)) + return; acpi_disable_gpe(NULL, ec->gpe); if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) -- cgit v1.2.3 From 4f7ad5211eb4d331a54f3cc6832883e5e7e95eea Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 14 Dec 2014 23:13:55 +0100 Subject: SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/scsi/ and in include/scsi/scsi_device.h. Signed-off-by: Rafael J. Wysocki Reviewed-by: Aaron Lu Acked-by: Christoph Hellwig --- drivers/scsi/scsi_pm.c | 10 ---------- drivers/scsi/scsi_priv.h | 5 ++--- drivers/scsi/ufs/ufshcd-pci.c | 11 ++++------- drivers/scsi/ufs/ufshcd-pltfrm.c | 11 ++++------- include/scsi/scsi_device.h | 4 ++-- 5 files changed, 12 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c index 7454498c4091..9e43ae1d2163 100644 --- a/drivers/scsi/scsi_pm.c +++ b/drivers/scsi/scsi_pm.c @@ -213,8 +213,6 @@ static int scsi_bus_restore(struct device *dev) #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM_RUNTIME - static int sdev_runtime_suspend(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; @@ -332,14 +330,6 @@ void scsi_autopm_put_host(struct Scsi_Host *shost) pm_runtime_put_sync(&shost->shost_gendev); } -#else - -#define scsi_runtime_suspend NULL -#define scsi_runtime_resume NULL -#define scsi_runtime_idle NULL - -#endif /* CONFIG_PM_RUNTIME */ - const struct dev_pm_ops scsi_bus_pm_ops = { .prepare = scsi_bus_prepare, .suspend = scsi_bus_suspend, diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 2dc4a83fb84c..e3902fc66278 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -155,8 +155,7 @@ static inline void scsi_netlink_exit(void) {} /* scsi_pm.c */ #ifdef CONFIG_PM extern const struct dev_pm_ops scsi_bus_pm_ops; -#endif -#ifdef CONFIG_PM_RUNTIME + extern void scsi_autopm_get_target(struct scsi_target *); extern void scsi_autopm_put_target(struct scsi_target *); extern int scsi_autopm_get_host(struct Scsi_Host *); @@ -166,7 +165,7 @@ static inline void scsi_autopm_get_target(struct scsi_target *t) {} static inline void scsi_autopm_put_target(struct scsi_target *t) {} static inline int scsi_autopm_get_host(struct Scsi_Host *h) { return 0; } static inline void scsi_autopm_put_host(struct Scsi_Host *h) {} -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ extern struct async_domain scsi_sd_pm_domain; extern struct async_domain scsi_sd_probe_domain; diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index 955ed5587011..d15eaa466c59 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -62,12 +62,7 @@ static int ufshcd_pci_resume(struct device *dev) { return ufshcd_system_resume(dev_get_drvdata(dev)); } -#else -#define ufshcd_pci_suspend NULL -#define ufshcd_pci_resume NULL -#endif /* CONFIG_PM */ -#ifdef CONFIG_PM_RUNTIME static int ufshcd_pci_runtime_suspend(struct device *dev) { return ufshcd_runtime_suspend(dev_get_drvdata(dev)); @@ -80,11 +75,13 @@ static int ufshcd_pci_runtime_idle(struct device *dev) { return ufshcd_runtime_idle(dev_get_drvdata(dev)); } -#else /* !CONFIG_PM_RUNTIME */ +#else /* !CONFIG_PM */ +#define ufshcd_pci_suspend NULL +#define ufshcd_pci_resume NULL #define ufshcd_pci_runtime_suspend NULL #define ufshcd_pci_runtime_resume NULL #define ufshcd_pci_runtime_idle NULL -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ /** * ufshcd_pci_shutdown - main function to put the controller in reset state diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 1c3467b82566..76d39b617db7 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -261,12 +261,7 @@ static int ufshcd_pltfrm_resume(struct device *dev) { return ufshcd_system_resume(dev_get_drvdata(dev)); } -#else -#define ufshcd_pltfrm_suspend NULL -#define ufshcd_pltfrm_resume NULL -#endif -#ifdef CONFIG_PM_RUNTIME static int ufshcd_pltfrm_runtime_suspend(struct device *dev) { return ufshcd_runtime_suspend(dev_get_drvdata(dev)); @@ -279,11 +274,13 @@ static int ufshcd_pltfrm_runtime_idle(struct device *dev) { return ufshcd_runtime_idle(dev_get_drvdata(dev)); } -#else /* !CONFIG_PM_RUNTIME */ +#else /* !CONFIG_PM */ +#define ufshcd_pltfrm_suspend NULL +#define ufshcd_pltfrm_resume NULL #define ufshcd_pltfrm_runtime_suspend NULL #define ufshcd_pltfrm_runtime_resume NULL #define ufshcd_pltfrm_runtime_idle NULL -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static void ufshcd_pltfrm_shutdown(struct platform_device *pdev) { diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 6364e23454dd..3a4edd1f7dbb 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -441,13 +441,13 @@ static inline int scsi_execute_req(struct scsi_device *sdev, extern void sdev_disable_disk_events(struct scsi_device *sdev); extern void sdev_enable_disk_events(struct scsi_device *sdev); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM extern int scsi_autopm_get_device(struct scsi_device *); extern void scsi_autopm_put_device(struct scsi_device *); #else static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; } static inline void scsi_autopm_put_device(struct scsi_device *d) {} -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev) { -- cgit v1.2.3 From e8a9235c7c9257835a941ce89ea760ee95d94a70 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 14 Dec 2014 23:14:36 +0100 Subject: NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/nfc/trf7970a.c. Signed-off-by: Rafael J. Wysocki --- drivers/nfc/trf7970a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index d2ccd2890647..aa6a333b2ead 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -2154,7 +2154,7 @@ static int trf7970a_resume(struct device *dev) } #endif -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int trf7970a_pm_runtime_suspend(struct device *dev) { struct spi_device *spi = container_of(dev, struct spi_device, dev); -- cgit v1.2.3 From f2ea5e1708da1bd7cb11c2cd967071e23ec9e347 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 14 Dec 2014 23:14:46 +0100 Subject: power / PM: Eliminate CONFIG_PM_RUNTIME After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME within #ifdef blocks depending on CONFIG_PM may be dropped now. Do that in drivers/power/pm2301_charger.c. Signed-off-by: Rafael J. Wysocki --- drivers/power/pm2301_charger.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index 62c15af58c9a..777324992c59 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -951,8 +951,6 @@ static int pm2xxx_wall_charger_suspend(struct device *dev) #endif -#ifdef CONFIG_PM_RUNTIME - static int pm2xxx_runtime_suspend(struct device *dev) { struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev); @@ -977,8 +975,6 @@ static int pm2xxx_runtime_resume(struct device *dev) return 0; } -#endif - static const struct dev_pm_ops pm2xxx_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(pm2xxx_wall_charger_suspend, pm2xxx_wall_charger_resume) -- cgit v1.2.3 From b4df463678fb9c6dae9548dbb7545993779fd416 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Mon, 15 Dec 2014 16:01:29 +0800 Subject: ACPI / video: update the skip case for acpi_video_device_in_dod() If the firmware has declared more than 8 video output devices, and the one that control the internal panel's backlight is listed after the first 8 output devices, the _DOD will not include it due to the current i915 operation region implementation. As a result, we will not create a backlight device for it while we should. Solve this problem by special case the firmware that has 8+ output devices in that if we see such a firmware, we do not test if the device is in _DOD list. The creation of the backlight device will also enable the firmware to emit events on backlight hotkey press when the acpi_osi= cmdline option is specified on those affected ASUS laptops. Link: https://bugzilla.kernel.org/show_bug.cgi?id=70241 Reported-and-tested-by: Oleksij Rempel Reported-and-tested-by: Dmitry Tunin Reported-and-tested-by: Jimbo Cc: 3.18+ # 3.18+ Signed-off-by: Aaron Lu Acked-by: Jani Nikula Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 185a57d13723..1eaadff2e198 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -155,6 +155,7 @@ struct acpi_video_bus { u8 dos_setting; struct acpi_video_enumerated_device *attached_array; u8 attached_count; + u8 child_count; struct acpi_video_bus_cap cap; struct acpi_video_bus_flags flags; struct list_head video_device_list; @@ -1159,8 +1160,12 @@ static bool acpi_video_device_in_dod(struct acpi_video_device *device) struct acpi_video_bus *video = device->video; int i; - /* If we have a broken _DOD, no need to test */ - if (!video->attached_count) + /* + * If we have a broken _DOD or we have more than 8 output devices + * under the graphics controller node that we can't proper deal with + * in the operation region code currently, no need to test. + */ + if (!video->attached_count || video->child_count > 8) return true; for (i = 0; i < video->attached_count; i++) { @@ -1413,6 +1418,7 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, dev_err(&dev->dev, "Can't attach device\n"); break; } + video->child_count++; } return status; } -- cgit v1.2.3 From 7c1ac18dc02c105a199167ecc495944bd0e14d5a Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Mon, 15 Dec 2014 15:58:24 -0800 Subject: MAINTAINERS: add entry for intel_pstate Add entry for intel_pstate. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Rafael J. Wysocki --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 0ff630de8a6d..888d8bd8b5b7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4837,6 +4837,12 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git S: Supported F: drivers/idle/intel_idle.c +INTEL PSTATE DRIVER +M: Kristen Carlson Accardi +L: linux-pm@vger.kernel.org +S: Supported +F: drivers/cpufreq/intel_pstate.c + INTEL FRAMEBUFFER DRIVER (excluding 810 and 815) M: Maik Broemme L: linux-fbdev@vger.kernel.org -- cgit v1.2.3