summaryrefslogtreecommitdiff
path: root/drivers/input/mouse
AgeCommit message (Collapse)AuthorFilesLines
2015-01-19Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: uinput - fix ioctl nr overflow for UI_GET_SYSNAME/VERSION Input: I8042 - add Acer Aspire 7738 to the nomux list Input: elantech - support new ICs types for version 4 Input: i8042 - reset keyboard to fix Elantech touchpad detection MAINTAINERS: remove Dmitry Torokhov's alternate address
2015-01-08Input: elantech - support new ICs types for version 4Sam hung1-0/+2
This change allows the driver to recognize newer Elantech touchpads. Cc: stable@vger.kernel.org Signed-off-by: Yi ju Hong <sam.hung@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-30Merge branch 'for-linus' of ↵Linus Torvalds3-10/+83
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
2014-12-18Merge branch 'next' into for-linusDmitry Torokhov3-10/+83
Second round of input updates for 3.19.
2014-12-18Input: alps - v7: document the v7 touchpad packet protocolHans de Goede1-0/+28
Add a table documenting where all the bits are in the v7 touchpad packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18Input: alps - v7: fix finger counting for > 2 fingers on clickpadsHans de Goede1-4/+12
Protocol v7 uses the middle / right button bits on clickpads to communicate "location" information of a 3th touch (and possible 4th) touch on clickpads. Specifically when 3 touches are down, if one of the 3 touches is in the left / right button area, this will get reported in the middle / right button bits and the touchpad will still send a TWO type packet rather then a MULTI type packet, so when this happens we must add the finger reported in the button area to the finger count. Likewise we must also add fingers reported this way to the finger count when we get MULTI packets. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18Input: alps - v7: sometimes a single touch is reported in mt[1]Hans de Goede1-4/+14
The v7 proto differentiates between a primary touch (with high precision) and a secondary touch (with lower precision). Normally when 2 fingers are down and one is lifted the still present touch becomes the primary touch, but some traces have shown that this does not happen always. This commit deals with this by making alps_get_mt_count() not stop at the first empty mt slot, and if a touch is present in mt[1] and not mt[0] moving the data to mt[0] (for input_mt_assign_slots). BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18Input: alps - v7: ignore new packetsHans de Goede1-6/+24
NEW packets are send to indicate a discontinuity in the finger coordinate reporting. Specifically a finger may have moved from slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for us. NEW packets have 3 problems: 1) They do not contain middle / right button info (on non clickpads) this can be worked around by preserving the old button state 2) They do not contain an accurate fingercount, and they are typically send when the number of fingers changes. We cannot use the old finger count as that may mismatch with the amount of touch coordinates we've available in the NEW packet 3) Their x data for the second touch is inaccurate leading to a possible jump of the x coordinate by 16 units when the first non NEW packet comes in Since problems 2 & 3 cannot be worked around, just ignore them. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-17Input: psmouse - expose drift duration for IBM trackpointshaarp2-0/+9
IBM Trackpoints have a feature to compensate for drift by recalibrating themselves periodically. By default, if for 0.5 seconds there is no change in position, it's used as the new zero. This duration is too low. Often, the calibration happens when the trackpoint is in fact being used. IBM's Trackpoint Engineering Specifications show a configuration register that allows changing this duration, rstdft1. Expose it via sysfs among the other settings. Signed-off-by: Mike Murdoch <main.haarp@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-17Merge branch 'for-linus' of ↵Linus Torvalds10-144/+2546
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ...
2014-12-15Merge branch 'next' into for-linusDmitry Torokhov10-144/+2546
Prepare input updates for 3.19.
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-04Input: cyapa - use 'error' for error codesDudley Du1-47/+47
Let's use 'error' variable instead of 'ret' when we need to store erro codes. Signed-off-by: Dudley Du <dudley.dulixin@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-03Input: cyapa - fix resuming the deviceDudley Du1-4/+3
Chage b1cfa7b4388285c0f0b486f152ab0cb18612c779 tried to get away form using irq in cyapa structure and use client->irq instead, but missed a couple of spots making the touchpad inoperative after resume. Reported-by: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by: Dudley Du <dudley.dulixin@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-25Input: elantech - trust firmware about trackpoint presenceDmitry Torokhov1-9/+1
Only try to parse data as coming from trackpoint if firmware told us that trackpoint is present. Fixes commit caeb0d37fa3e387eb0dd22e5d497523c002033d1 Reported-and-tested-by: Marcus Overhagen <marcus.overhagen@gmail.com> Reported-and-tested-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-16Input: synaptics - adjust min/max on Thinkpad E540Ben Sagal1-0/+4
The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Cc: stable@vger.kernel.org Signed-off-by: Binyamin Sagal <bensagal@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - provide a sysfs knob for crc_enabledUlrik De Bie1-0/+2
The detection of crc_enabled is known to fail for Fujitsu H730. A DMI blacklist is added for that, but it can be expected that other laptops will pop up with this. Here a sysfs knob is provided to alter the behaviour of crc_enabled. Writing 0 or 1 to it sets the variable to 0 or 1. Reading it will show the crc_enabled variable (0 or 1). Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: elantech - report the middle button of the touchpadUlrik De Bie1-0/+19
In the past, no elantech was known with 3 touchpad mouse buttons. Fujitsu H730 is the first known elantech with a middle button. This commit enables this middle button. For backwards compatibility, the Fujitsu is detected via DMI, and only for this one 3 buttons will be announced. Reported-by: Stefan Valouch <stefan@valouch.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-13Input: alps - ignore bad data on Dell Latitudes E6440 and E7440Pali Rohár1-1/+16
Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: cyapa - switch to using managed resourcesDudley Du1-79/+105
Use of managed resources simplifies error handling and device removal code. Signed-off-by: Dudley Du <dudl@cypress.com> [Dmitry: added open/close methods so cyapa_remove is no longer needed.] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: lifebook - use "static inline" instead of "inline" in lifebook.hChen Gang1-3/+3
For functions defined in header files we should use static inline rather than inline, which breaks under the latest upstream gcc (which is really gcc issue, but static inline is better suited regardless). The related error (with allmodconfig under tile): MODPOST 4002 modules ERROR: "lifebook_detect" [drivers/input/mouse/psmouse.ko] undefined! Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-09Input: alps - allow up to 2 invalid packets without resetting devicePali Rohár1-0/+3
On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte in 6 bytes ALPS packet. In this case psmouse driver enter out of sync state. It looks like that all other bytes in packets are valid and also device working properly. So there is no need to do full device reset, just need to wait for byte which match condition for first byte (start of packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is small. This patch increase number of invalid bytes to size of 2 ALPS packets which psmouse driver can drop before do full reset. Resetting ALPS devices take some time and when doing reset on some Dell laptops touchpad, trackstick and also keyboard do not respond. So it is better to do it only if really necessary. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: alps - ignore potential bare packets when device is out of syncPali Rohár1-1/+7
5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - fix crc_enabled for Fujitsu H730Ulrik De Bie1-1/+18
The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-08Input: elantech - use elantech_report_trackpoint for hardware v4 tooUlrik De Bie1-2/+14
The Fujitsu H730 has hardware v4 with a trackpoint. This enables the elantech_report_trackpoint for v4. Reported-by: Stefan Valouch <stefan@valouch.com> Tested-by: Stefan Valouch <stefan@valouch.com> Tested-by: Alfredo Gemma <alfredo.gemma@gmail.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-06Input: synaptics - add min/max quirk for Lenovo T440sTakashi Iwai1-2/+3
The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748 Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman3-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-02Input: mouse - use __maybe_unused instead of ifdef around suspend/resumeJingoo Han3-12/+6
Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: psmouse - remove unneeded check in psmouse_reconnect()Dmitry Torokhov1-7/+0
psmouse_reconnect() will not be called if psmouse driver is not bound to the serio port, so there is no point in checking that. Also, as coded, it introduces potential NULL dereference in psmouse_dbg() in case psmouse is indeed NULL. Let's just remove it. Detected by Coverity: CID 146528 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-28Input: vsxxxaa - fix code dropping bytes from queueDmitry Torokhov1-1/+1
I believe the intent of the code was to drop oldest bytes from the queue, not the latest if we drop one byte and both latest and some oldest of we are dropping more than one. Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: add driver for Elan I2C/SMbus touchpadDuson Lin6-0/+2383
This driver supports Elan I2C/SMbus touchpads found in some laptops and also in many Chromebooks. Signed-off-by: Duson Lin <dusonlin@emc.com.tw> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-20input: mouse: drop owner assignment from platform_driversWolfram Sang3-3/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15Input: alps - fix v4 button press recognitionAndreas Bosch1-2/+2
Since the change to struct input_mt_pos some variables are now bitfields instead of integers. Automatic conversion from integer to bitfield entry destroys information, therefore enforce boolean interpretation instead. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1114768 Fixes: 02d04254a5df ("Input: alps - use struct input_mt_pos to track coordinates") Signed-off-by: Andreas Bosch <linux@progandy.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Input: synaptics - gate forcepad support by DMI checkDmitry Torokhov2-7/+23
Unfortunately, ForcePad capability is not actually exported over PS/2, so we have to resort to DMI checks. Cc: stable@vger.kernel.org Reported-by: Nicole Faerber <nicole.faerber@kernelconcepts.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-11Merge tag 'v3.17' into nextDmitry Torokhov8-27/+222
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
2014-09-15Input: psmouse - add support for detecting FocalTech PS/2 touchpadsHans de Goede4-1/+91
The Asus X450 and X550 laptops use a PS/2 touchpad from a new manufacturer called FocalTech: https://bugzilla.kernel.org/show_bug.cgi?id=77391 https://bugzilla.redhat.com/show_bug.cgi?id=1110011 The protocol for these devices is not known at this time, but even without knowing the protocol they need some special handling. They get upset by some of our other PS/2 device probing, and once upset generate random mouse events making things unusable even with an external mouse. This patch adds detection of these devices based on their pnp ids, and when they are detected, treats them as a bare ps/2 mouse. Doing things this way they at least work in their ps/2 mouse emulation mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-12Input: psmouse - add psmouse_matches_pnp_id helper functionHans de Goede3-14/+18
The matches_pnp_id function from the synaptics driver is useful for other drivers too. Make it a generic psmouse helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: synaptics - add support for ForcePadsDmitry Torokhov2-16/+63
ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add missing POINTER / DIRECT properties to a bunch of driversHans de Goede5-0/+10
I've not done a full audit of all mouse drivers, I noticed these ones were missing the POINTER property while working on the POINTING_STICK property. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: add INPUT_PROP_POINTING_STICK propertyHans de Goede4-0/+9
It is useful for userspace to know that there not dealing with a regular mouse but rather with a pointing stick (e.g. a trackpoint) so that userspace can e.g. automatically enable middle button scrollwheel emulation. It is impossible to tell the difference from the evdev info without resorting to putting a list of device / driver names in userspace, this is undesirable. Add a property which allows userspace to see if a device is a pointing stick, and set it on all the pointing stick drivers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08Input: elantech - fix detection of touchpad on ASUS s301lHans de Goede1-0/+7
Adjust Elantech signature validation to account fo rnewer models of touchpads. Cc: stable@vger.kernel.org Reported-and-tested-by: Màrius Monton <marius.monton@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - add support for trackpoint found on some v3 modelsUlrik De Bie2-9/+130
Some elantech v3 touchpad equipped laptops also have a trackpoint, before this commit, these give sync errors. With this patch, the trackpoint is provided as another input device: 'Elantech PS/2 TrackPoint' The patch will also output messages that do not follow the expected pattern. In the mean time I've seen 2 unknown packets occasionally: 0x04 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 0x00 , 0x00 , 0x00 , 0x02 , 0x00 , 0x00 I don't know what those are for, but they can be safely ignored. Currently all packets that are not known to v3 touchpad and where packet[3] (the fourth byte) lowest nibble is 6 are now recognized as PACKET_TRACKPOINT and processed by the new elantech_report_trackpoint. This has been verified to work on a laptop Lenovo L530 where the touchpad/trackpoint combined identify themselves as: psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f02) psmouse serio1: elantech: Synaptics capabilities query result 0xb9, 0x15, 0x0c. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - reset the device when elantech probe failsUlrik De Bie1-0/+1
elantech_init() calls elantech_set_absolute_mode which sets the driver in an absolute mode. When after this the elantech_init fails, it is best to turn the ps/2 mouse emulation mode back on by calling psmouse_reset() so that it can work as a regular mouse. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: ALPS - suppress message about 'Unknown touchpad'Dmitry Torokhov1-2/+2
When we fail to match data returned by E7 and EC reports we state that we found "Unknown ALPS touchpad" whereas it is most likely it is not ALPS touchpad at all. Change wording a bit and reduce the message to debug so that it does not litter users logs and confuse them. Reported-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-14Merge branch 'next' into for-linusDmitry Torokhov1-3/+69
Prepare second round of input updates for 3.17.
2014-08-08Input: synaptics - use firmware data for Cr-48Henrik Rydberg1-2/+68
The profile sensor clickpad in a Cr-48 Chromebook does a reasonable job of tracking individual fingers. This tracking isn't perfect, but, experiments show that it works better than just passing "semi-mt" data to userspace, and making userspace try to deduce where the fingers are given a bounding box. This patch tries to report correct two-finger positions instead of the {(min_x, min_y), (max_x, max_y)} for profile sensor clickpads on Cr-48 chromebooks. Note that this device's firmware always reports the higher (smaller y) finger in the "sgm" packet, and the lower (larger y) finger in the "agm" packet. Thus, when a new finger arrives on the pad, the kernel driver uses input core's contact tracking facilities to match contacts with slots. Inspired by patch by Daniel Kurtz <djkurtz@chromium.org> and Chung-yih Wang <cywang@chromium.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07Input: synaptics - properly initialize slots for semi-MTDmitry Torokhov1-3/+3
Semi-MT devices are pointers too, so let's tell that to input_mt_init_slots(), as well as let it set up the devices as semi-MT, instead of us doing it manually. Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Merge branch 'next' into for-linusDmitry Torokhov2-243/+508
Prepare first round of input updates for 3.17.
2014-07-30Input: alps - Rushmore and v7 resolution supportHans de Goede2-0/+50
Add support for querying the physical size from the touchpad for Rushmore and v7 touchpads, and use that to tell userspace the device resolution. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-26Input: alps - add support for v7 devicesYunkang Tang2-3/+280
Such as found on the new Toshiba Portégé Z30-A and Z40-A. Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> [hdegoede@redhat.com: Remove softbutton handling, this is done in userspace] [hdegoede@redhat.com: Report INPUT_PROP_BUTTONPAD] [hdegoede@redhat.com: Do not report fake PRESSURE, reporting BTN_TOUCH is enough] [hdegoede@redhat.com: Various cleanups / refactoring] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 21:06:12 +0000