diff options
author | Jiri Kosina <jkosina@suse.cz> | 2014-11-20 14:42:02 +0100 |
---|---|---|
committer | Jiri Kosina <jkosina@suse.cz> | 2014-11-20 14:42:02 +0100 |
commit | a02001086bbfb4da35d1228bebc2f1b442db455f (patch) | |
tree | 62ab47936cef06fd08657ca5b6cd1df98c19be57 /drivers/pinctrl/pinctrl-at91.c | |
parent | eff264efeeb0898408e8c9df72d8a32621035bed (diff) | |
parent | fc14f9c1272f62c3e8d01300f52467c0d9af50f9 (diff) |
Merge Linus' tree to be be to apply submitted patches to newer code than
current trivial.git base
Diffstat (limited to 'drivers/pinctrl/pinctrl-at91.c')
-rw-r--r-- | drivers/pinctrl/pinctrl-at91.c | 243 |
1 files changed, 199 insertions, 44 deletions
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 421493cb490c..354a81d40925 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -58,11 +58,28 @@ static int gpio_banks; #define DEGLITCH (1 << 2) #define PULL_DOWN (1 << 3) #define DIS_SCHMIT (1 << 4) +#define DRIVE_STRENGTH_SHIFT 5 +#define DRIVE_STRENGTH_MASK 0x3 +#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT) #define DEBOUNCE (1 << 16) #define DEBOUNCE_VAL_SHIFT 17 #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT) /** + * These defines will translated the dt binding settings to our internal + * settings. They are not necessarily the same value as the register setting. + * The actual drive strength current of low, medium and high must be looked up + * from the corresponding device datasheet. This value is different for pins + * that are even in the same banks. It is also dependent on VCC. + * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive + * strength when there is no dt config for it. + */ +#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT) +#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT) +#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT) +#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT) + +/** * struct at91_pmx_func - describes AT91 pinmux functions * @name: the name of this specific function * @groups: corresponding pin groups @@ -148,6 +165,9 @@ struct at91_pinctrl_mux_ops { void (*set_pulldown)(void __iomem *pio, unsigned mask, bool is_on); bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin); void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask); + unsigned (*get_drivestrength)(void __iomem *pio, unsigned pin); + void (*set_drivestrength)(void __iomem *pio, unsigned pin, + u32 strength); /* irq */ int (*irq_type)(struct irq_data *d, unsigned type); }; @@ -315,6 +335,30 @@ static unsigned pin_to_mask(unsigned int pin) return 1 << pin; } +static unsigned two_bit_pin_value_shift_amount(unsigned int pin) +{ + /* return the shift value for a pin for "two bit" per pin registers, + * i.e. drive strength */ + return 2*((pin >= MAX_NB_GPIO_PER_BANK/2) + ? pin - MAX_NB_GPIO_PER_BANK/2 : pin); +} + +static unsigned sama5d3_get_drive_register(unsigned int pin) +{ + /* drive strength is split between two registers + * with two bits per pin */ + return (pin >= MAX_NB_GPIO_PER_BANK/2) + ? SAMA5D3_PIO_DRIVER2 : SAMA5D3_PIO_DRIVER1; +} + +static unsigned at91sam9x5_get_drive_register(unsigned int pin) +{ + /* drive strength is split between two registers + * with two bits per pin */ + return (pin >= MAX_NB_GPIO_PER_BANK/2) + ? AT91SAM9X5_PIO_DRIVER2 : AT91SAM9X5_PIO_DRIVER1; +} + static void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask) { writel_relaxed(mask, pio + PIO_IDR); @@ -327,6 +371,9 @@ static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin) static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on) { + if (on) + writel_relaxed(mask, pio + PIO_PPDDR); + writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR)); } @@ -455,6 +502,9 @@ static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin) static void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on) { + if (is_on) + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR)); } @@ -468,6 +518,79 @@ static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin) return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1; } +static inline u32 read_drive_strength(void __iomem *reg, unsigned pin) +{ + unsigned tmp = __raw_readl(reg); + + tmp = tmp >> two_bit_pin_value_shift_amount(pin); + + return tmp & DRIVE_STRENGTH_MASK; +} + +static unsigned at91_mux_sama5d3_get_drivestrength(void __iomem *pio, + unsigned pin) +{ + unsigned tmp = read_drive_strength(pio + + sama5d3_get_drive_register(pin), pin); + + /* SAMA5 strength is 1:1 with our defines, + * except 0 is equivalent to low per datasheet */ + if (!tmp) + tmp = DRIVE_STRENGTH_LOW; + + return tmp; +} + +static unsigned at91_mux_sam9x5_get_drivestrength(void __iomem *pio, + unsigned pin) +{ + unsigned tmp = read_drive_strength(pio + + at91sam9x5_get_drive_register(pin), pin); + + /* strength is inverse in SAM9x5s hardware with the pinctrl defines + * hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */ + tmp = DRIVE_STRENGTH_HI - tmp; + + return tmp; +} + +static void set_drive_strength(void __iomem *reg, unsigned pin, u32 strength) +{ + unsigned tmp = __raw_readl(reg); + unsigned shift = two_bit_pin_value_shift_amount(pin); + + tmp &= ~(DRIVE_STRENGTH_MASK << shift); + tmp |= strength << shift; + + __raw_writel(tmp, reg); +} + +static void at91_mux_sama5d3_set_drivestrength(void __iomem *pio, unsigned pin, + u32 setting) +{ + /* do nothing if setting is zero */ + if (!setting) + return; + + /* strength is 1 to 1 with setting for SAMA5 */ + set_drive_strength(pio + sama5d3_get_drive_register(pin), pin, setting); +} + +static void at91_mux_sam9x5_set_drivestrength(void __iomem *pio, unsigned pin, + u32 setting) +{ + /* do nothing if setting is zero */ + if (!setting) + return; + + /* strength is inverse on SAM9x5s with our defines + * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ + setting = DRIVE_STRENGTH_HI - setting; + + set_drive_strength(pio + at91sam9x5_get_drive_register(pin), pin, + setting); +} + static struct at91_pinctrl_mux_ops at91rm9200_ops = { .get_periph = at91_mux_get_periph, .mux_A_periph = at91_mux_set_A_periph, @@ -491,16 +614,37 @@ static struct at91_pinctrl_mux_ops at91sam9x5_ops = { .set_pulldown = at91_mux_pio3_set_pulldown, .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig, .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .get_drivestrength = at91_mux_sam9x5_get_drivestrength, + .set_drivestrength = at91_mux_sam9x5_set_drivestrength, + .irq_type = alt_gpio_irq_type, +}; + +static struct at91_pinctrl_mux_ops sama5d3_ops = { + .get_periph = at91_mux_pio3_get_periph, + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .get_deglitch = at91_mux_pio3_get_deglitch, + .set_deglitch = at91_mux_pio3_set_deglitch, + .get_debounce = at91_mux_pio3_get_debounce, + .set_debounce = at91_mux_pio3_set_debounce, + .get_pulldown = at91_mux_pio3_get_pulldown, + .set_pulldown = at91_mux_pio3_set_pulldown, + .get_schmitt_trig = at91_mux_pio3_get_schmitt_trig, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .get_drivestrength = at91_mux_sama5d3_get_drivestrength, + .set_drivestrength = at91_mux_sama5d3_set_drivestrength, .irq_type = alt_gpio_irq_type, }; static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin) { if (pin->mux) { - dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lu\n", + dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n", pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf); } else { - dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lu\n", + dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n", pin->bank + 'A', pin->pin, pin->conf); } } @@ -554,8 +698,8 @@ static void at91_mux_gpio_enable(void __iomem *pio, unsigned mask, bool input) writel_relaxed(mask, pio + (input ? PIO_ODR : PIO_OER)); } -static int at91_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector, - unsigned group) +static int at91_pmx_set(struct pinctrl_dev *pctldev, unsigned selector, + unsigned group) { struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf; @@ -611,26 +755,6 @@ static int at91_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector, return 0; } -static void at91_pmx_disable(struct pinctrl_dev *pctldev, unsigned selector, - unsigned group) -{ - struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); - const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf; - const struct at91_pmx_pin *pin; - uint32_t npins = info->groups[group].npins; - int i; - unsigned mask; - void __iomem *pio; - - for (i = 0; i < npins; i++) { - pin = &pins_conf[i]; - at91_pin_dbg(info->dev, pin); - pio = pin_to_controller(info, pin->bank); - mask = pin_to_mask(pin->pin); - at91_mux_gpio_enable(pio, mask, 1); - } -} - static int at91_pmx_get_funcs_count(struct pinctrl_dev *pctldev) { struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); @@ -704,8 +828,7 @@ static const struct pinmux_ops at91_pmx_ops = { .get_functions_count = at91_pmx_get_funcs_count, .get_function_name = at91_pmx_get_func_name, .get_function_groups = at91_pmx_get_groups, - .enable = at91_pmx_enable, - .disable = at91_pmx_disable, + .set_mux = at91_pmx_set, .gpio_request_enable = at91_gpio_request_enable, .gpio_disable_free = at91_gpio_disable_free, }; @@ -737,6 +860,9 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev, *config |= PULL_DOWN; if (info->ops->get_schmitt_trig && info->ops->get_schmitt_trig(pio, pin)) *config |= DIS_SCHMIT; + if (info->ops->get_drivestrength) + *config |= (info->ops->get_drivestrength(pio, pin) + << DRIVE_STRENGTH_SHIFT); return 0; } @@ -750,6 +876,7 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev, void __iomem *pio; int i; unsigned long config; + unsigned pin; for (i = 0; i < num_configs; i++) { config = configs[i]; @@ -758,7 +885,8 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, config); pio = pin_to_controller(info, pin_to_bank(pin_id)); - mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK); + pin = pin_id % MAX_NB_GPIO_PER_BANK; + mask = pin_to_mask(pin); if (config & PULL_UP && config & PULL_DOWN) return -EINVAL; @@ -774,6 +902,10 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev, info->ops->set_pulldown(pio, mask, config & PULL_DOWN); if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT) info->ops->disable_schmitt_trig(pio, mask); + if (info->ops->set_drivestrength) + info->ops->set_drivestrength(pio, pin, + (config & DRIVE_STRENGTH) + >> DRIVE_STRENGTH_SHIFT); } /* for each config */ @@ -789,19 +921,31 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev, } \ } while (0) +#define DBG_SHOW_FLAG_MASKED(mask,flag) do { \ + if ((config & mask) == flag) { \ + if (num_conf) \ + seq_puts(s, "|"); \ + seq_puts(s, #flag); \ + num_conf++; \ + } \ +} while (0) + static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, unsigned pin_id) { unsigned long config; - int ret, val, num_conf = 0; + int val, num_conf = 0; - ret = at91_pinconf_get(pctldev, pin_id, &config); + at91_pinconf_get(pctldev, pin_id, &config); DBG_SHOW_FLAG(MULTI_DRIVE); DBG_SHOW_FLAG(PULL_UP); DBG_SHOW_FLAG(PULL_DOWN); DBG_SHOW_FLAG(DIS_SCHMIT); DBG_SHOW_FLAG(DEGLITCH); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_LOW); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_MED); + DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_HI); DBG_SHOW_FLAG(DEBOUNCE); if (config & DEBOUNCE) { val = config >> DEBOUNCE_VAL_SHIFT; @@ -945,7 +1089,7 @@ static int at91_pinctrl_parse_functions(struct device_node *np, /* Initialise function */ func->name = np->name; func->ngroups = of_get_child_count(np); - if (func->ngroups <= 0) { + if (func->ngroups == 0) { dev_err(info->dev, "no groups defined\n"); return -EINVAL; } @@ -966,6 +1110,7 @@ static int at91_pinctrl_parse_functions(struct device_node *np, } static struct of_device_id at91_pinctrl_of_match[] = { + { .compatible = "atmel,sama5d3-pinctrl", .data = &sama5d3_ops }, { .compatible = "atmel,at91sam9x5-pinctrl", .data = &at91sam9x5_ops }, { .compatible = "atmel,at91rm9200-pinctrl", .data = &at91rm9200_ops }, { /* sentinel */ } @@ -1466,7 +1611,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) /* now it may re-trigger */ } -static int at91_gpio_of_irq_setup(struct device_node *node, +static int at91_gpio_of_irq_setup(struct platform_device *pdev, struct at91_gpio_chip *at91_gpio) { struct at91_gpio_chip *prev = NULL; @@ -1491,9 +1636,11 @@ static int at91_gpio_of_irq_setup(struct device_node *node, 0, handle_edge_irq, IRQ_TYPE_EDGE_BOTH); - if (ret) - panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", + if (ret) { + dev_err(&pdev->dev, "at91_gpio.%d: Couldn't add irqchip to gpiochip.\n", at91_gpio->pioc_idx); + return ret; + } /* Setup chained handler */ if (at91_gpio->pioc_idx) @@ -1596,19 +1743,22 @@ static int at91_gpio_probe(struct platform_device *pdev) at91_chip->pioc_virq = irq; at91_chip->pioc_idx = alias_idx; - at91_chip->clock = clk_get(&pdev->dev, NULL); + at91_chip->clock = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(at91_chip->clock)) { dev_err(&pdev->dev, "failed to get clock, ignoring.\n"); + ret = PTR_ERR(at91_chip->clock); goto err; } - if (clk_prepare(at91_chip->clock)) - goto clk_prep_err; + ret = clk_prepare(at91_chip->clock); + if (ret) + goto clk_prepare_err; /* enable PIO controller's clock */ - if (clk_enable(at91_chip->clock)) { + ret = clk_enable(at91_chip->clock); + if (ret) { dev_err(&pdev->dev, "failed to enable clock, ignoring.\n"); - goto clk_err; + goto clk_enable_err; } at91_chip->chip = at91_gpio_template; @@ -1633,7 +1783,7 @@ static int at91_gpio_probe(struct platform_device *pdev) if (!names) { ret = -ENOMEM; - goto clk_err; + goto clk_enable_err; } for (i = 0; i < chip->ngpio; i++) @@ -1651,23 +1801,28 @@ static int at91_gpio_probe(struct platform_device *pdev) ret = gpiochip_add(chip); if (ret) - goto clk_err; + goto gpiochip_add_err; gpio_chips[alias_idx] = at91_chip; gpio_banks = max(gpio_banks, alias_idx + 1); at91_gpio_probe_fixup(); - at91_gpio_of_irq_setup(np, at91_chip); + ret = at91_gpio_of_irq_setup(pdev, at91_chip); + if (ret) + goto irq_setup_err; dev_info(&pdev->dev, "at address %p\n", at91_chip->regbase); return 0; -clk_err: +irq_setup_err: + gpiochip_remove(chip); +gpiochip_add_err: + clk_disable(at91_chip->clock); +clk_enable_err: clk_unprepare(at91_chip->clock); -clk_prep_err: - clk_put(at91_chip->clock); +clk_prepare_err: err: dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx); |