INTEGRATION: CWS jsc18 (1.1.2); FILE ADDED

2007/07/04 08:02:02 jsc 1.1.2.1: #i78746# new

1 files changed, 270 insertions, 0 deletions

diff --git a/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java b/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
new file mode 100644
index 00000000..37653132
--- /dev/null
+++ b/odk/examples/DevelopersGuide/GUI/UnoDialogSample2.java
@@ -0,0 +1,270 @@
+/*************************************************************************
+ *
+ *  $RCSfile: UnoDialogSample2.java,v $
+ *
+ *  $Revision: 1.2 $
+ *
+ *  last change: $Author: hr $ $Date: 2007-07-31 13:55:50 $
+ *
+ *  The Contents of this file are made available subject to the terms of
+ *  the BSD license.
+ *  
+ *  Copyright (c) 2003 by Sun Microsystems, Inc.
+ *  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of Sun Microsystems, Inc. nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *     
+ *************************************************************************/
+import com.sun.star.awt.PushButtonType;
+import com.sun.star.awt.XControl;
+import com.sun.star.awt.XDialog;
+import com.sun.star.awt.XFixedText;
+import com.sun.star.awt.XListBox;
+import com.sun.star.awt.XWindow;
+import com.sun.star.beans.MethodConcept;
+import com.sun.star.beans.Property;
+import com.sun.star.beans.PropertyValue;
+import com.sun.star.beans.XIntrospection;
+import com.sun.star.beans.XIntrospectionAccess;
+import com.sun.star.beans.XMultiPropertySet;
+import com.sun.star.beans.XPropertySet;
+import com.sun.star.frame.XComponentLoader;
+import com.sun.star.lang.XMultiComponentFactory;
+import com.sun.star.lang.XServiceInfo;
+import com.sun.star.lang.XTypeProvider;
+import com.sun.star.reflection.XIdlMethod;
+import com.sun.star.uno.Type;
+import com.sun.star.uno.UnoRuntime;
+import com.sun.star.uno.XComponentContext;
+
+public class UnoDialogSample2 extends UnoDialogSample {
+    XIntrospectionAccess m_xIntrospectionAccess = null;
+    Object m_oUnoObject = null;
+    // define some constants used to set positions and sizes 
+    // of controls. For further information see
+    // http://ui.openoffice.org/knowledge/DialogSpecificationandGuidelines.odt
+    final static int nFixedTextHeight = 8;    
+    final static int nControlMargin = 6;        
+    final static int nDialogWidth = 250;
+    final static int nDialogHeight = 140;
+    // the default roadmap width == 80 MAPs
+    final static int nRoadmapWidth = 80;
+    final static int nButtonHeight = 14;
+    final static int nButtonWidth = 50;
+    
+    
+    public UnoDialogSample2(XComponentContext _xContext, XMultiComponentFactory _xMCF, Object _oUnoObject) {
+        super(_xContext, _xMCF);
+        try {
+            m_oUnoObject = _oUnoObject;
+            Object o = m_xMCF.createInstanceWithContext("com.sun.star.beans.Introspection", m_xContext);
+            XIntrospection m_xIntrospection = ( XIntrospection ) UnoRuntime.queryInterface(XIntrospection.class, o ); 
+            // the variable m_xIntrospectionAccess offers functionality to access all methods and properties 
+            // of a variable
+            m_xIntrospectionAccess = m_xIntrospection.inspect(_oUnoObject);
+        } catch (com.sun.star.uno.Exception ex) {
+            ex.printStackTrace();
+        }
+    }
+    
+    public static void main(String args[]) {
+        UnoDialogSample2 oUnoDialogSample2 = null;
+        try {        
+            XComponentContext xContext = com.sun.star.comp.helper.Bootstrap.bootstrap();
+            if(xContext != null )
+                System.out.println("Connected to a running office ...");
+            XMultiComponentFactory xMCF = xContext.getServiceManager();
+            PropertyValue[] aPropertyValues = new PropertyValue[]{};
+            // create an arbitrary Uno-Object - in this case an empty writer document..
+            Object oDesktop =xMCF.createInstanceWithContext("com.sun.star.frame.Desktop", xContext);
+            XComponentLoader xComponentLoader = (XComponentLoader) UnoRuntime.queryInterface(XComponentLoader.class, oDesktop);
+            Object oUnoObject = xComponentLoader.loadComponentFromURL("private:factory/swriter", "_default", 0, aPropertyValues);         
+            
+            // define some coordinates where to position the controls
+            final int nButtonPosX = (int)((nDialogWidth/2) - (nButtonWidth/2));
+            final int nButtonPosY = nDialogHeight - nButtonHeight - nControlMargin;
+            final int nControlPosX = nRoadmapWidth + 2*nControlMargin;
+            final int nControlWidth = nDialogWidth - 3*nControlMargin - nRoadmapWidth;
+            final int nListBoxHeight = nDialogHeight - 4*nControlMargin - nButtonHeight;
+            oUnoDialogSample2 = new UnoDialogSample2(xContext, xMCF, oUnoObject);
+            oUnoDialogSample2.initialize( new String[] {"Height", "Moveable", "Name","PositionX","PositionY", "Step", "TabIndex","Title","Width"},
+                                          new Object[] { new Integer(nDialogHeight), Boolean.TRUE, "Dialog1", new Integer(102),new Integer(41), new Integer(1), new Short((short) 0), "Inspect a Uno-Object", new Integer(nDialogWidth)});
+            String sIntroLabel = "This Dialog lists information about a given Uno-Object.\nIt offers a view to inspect all suppported servicenames, exported interfaces, methods and properties.";
+            oUnoDialogSample2.insertMultiLineFixedText(nControlPosX, 27, nControlWidth, 4, 1, sIntroLabel);
+            // get the data from the UNO object...
+            String[] sSupportedServiceNames = oUnoDialogSample2.getSupportedServiceNames();
+            String[] sInterfaceNames = oUnoDialogSample2.getExportedInterfaceNames();
+            String[] sMethodNames = oUnoDialogSample2.getMethodNames();
+            String[] sPropertyNames = oUnoDialogSample2.getPropertyNames();
+            // add controls to the dialog...
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 2, sSupportedServiceNames);
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 3, sInterfaceNames);
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 4, sMethodNames);
+            oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 5, sPropertyNames);
+            oUnoDialogSample2.insertButton(oUnoDialogSample2, nButtonPosX, nButtonPosY, nButtonWidth, "~Close", (short) PushButtonType.OK_value);
+            oUnoDialogSample2.insertHorizontalFixedLine(0, nButtonPosY - nControlMargin - 4, nDialogWidth, "");        
+            // create the windowpeer; 
+            // it must be kept in mind that it must be created after the insertion of the controls 
+            // (see http://qa.openoffice.org/issues/show_bug.cgi?id=75129)
+            oUnoDialogSample2.createWindowPeer();
+            // add the roadmap control. Note that the roadmap may not be created before the windowpeer of the dialog exists
+            // (see http://qa.openoffice.org/issues/show_bug.cgi?id=67369)
+            oUnoDialogSample2.addRoadmap(oUnoDialogSample2.getRoadmapItemStateChangeListener());
+            oUnoDialogSample2.insertRoadmapItem(0, true, "Introduction", 1);
+            oUnoDialogSample2.insertRoadmapItem(1, true, "Supported Services", 2);
+            oUnoDialogSample2.insertRoadmapItem(2, true, "Interfaces", 3);
+            oUnoDialogSample2.insertRoadmapItem(3, true, "Methods", 4);
+            oUnoDialogSample2.insertRoadmapItem(4, true, "Properties", 5);
+            oUnoDialogSample2.m_xRMPSet.setPropertyValue("CurrentItemID", new Short((short) 1));
+            oUnoDialogSample2.m_xRMPSet.setPropertyValue("Complete", Boolean.TRUE);
+            oUnoDialogSample2.xDialog = (XDialog) UnoRuntime.queryInterface(XDialog.class, oUnoDialogSample2.m_xDialogControl);
+            oUnoDialogSample2.xDialog.execute();
+        }catch( Exception ex ) {
+            ex.printStackTrace(System.out);
+        }    
+        finally{
+            //make sure always to dispose the component and free the memory!
+            if (oUnoDialogSample2 != null){
+                if (oUnoDialogSample2.m_xComponent != null){
+                    oUnoDialogSample2.m_xComponent.dispose();
+                }
+            }
+        }
+    
+        System.exit( 0 );
+    }
+    
+
+    public String[] getMethodNames() {
+        String[] sMethodNames = new String[]{};
+        try {
+            XIdlMethod[] xIdlMethods = m_xIntrospectionAccess.getMethods(MethodConcept.ALL);
+            sMethodNames = new String[xIdlMethods.length];
+            for (int i = 0; i < xIdlMethods.length; i++){
+                sMethodNames[i] = xIdlMethods[i].getName();
+            }
+        }
+        catch( Exception e ) {
+            System.err.println( e );
+        }
+        return sMethodNames;
+    }
+    
+    // returns the names of all supported servicenames of a UNO object
+    public String[] getSupportedServiceNames() {
+        String[] sSupportedServiceNames = new String[]{};
+        // If the Uno-Object supports "com.sun.star.lang.XServiceInfo" 
+        // this will give access to all supported servicenames
+        XServiceInfo xServiceInfo = ( XServiceInfo ) UnoRuntime.queryInterface( XServiceInfo.class, m_oUnoObject);
+        if ( xServiceInfo != null ) {
+            sSupportedServiceNames = xServiceInfo.getSupportedServiceNames(); 
+        }
+        return sSupportedServiceNames;
+    }
+
+    // returns the names of all properties of a UNO object
+    protected String[] getPropertyNames() {
+        String[] sPropertyNames = new String[]{};
+        try {
+            Property[] aProperties = m_xIntrospectionAccess.getProperties(com.sun.star.beans.PropertyConcept.ATTRIBUTES + com.sun.star.beans.PropertyConcept.PROPERTYSET);
+            sPropertyNames = new String[aProperties.length];
+            for (int i = 0; i < aProperties.length; i++){
+                sPropertyNames[i] = aProperties[i].Name;
+            }
+        }
+        catch( Exception e ) {
+            System.err.println( e );
+        }
+        return sPropertyNames;
+    }
+
+
+    // returns the names of all exported interfaces of a UNO object
+    protected String[] getExportedInterfaceNames(){
+        Type[] aTypes = new Type[]{};
+        String[] sTypeNames = new String[]{};
+        // The XTypeProvider interfaces offers access to all exported interfaces
+        XTypeProvider xTypeProvider = ( XTypeProvider ) UnoRuntime.queryInterface( XTypeProvider.class, m_oUnoObject);
+        if ( xTypeProvider != null ) {
+            aTypes = xTypeProvider.getTypes();
+            sTypeNames = new String[aTypes.length];
+            for (int i = 0; i < aTypes.length - 1; i++){
+                sTypeNames[i] = aTypes[i].getTypeName();
+            }
+        }
+        return sTypeNames;
+    }
+    
+    
+    
+    public XListBox insertListBox(int _nPosX, int _nPosY, int _nHeight, int _nWidth, int _nStep, String[] _sStringItemList) {
+        XListBox xListBox = null;
+        try{
+            // create a unique name by means of an own implementation...
+            String sName = createUniqueName(m_xDlgModelNameContainer, "ListBox");
+            // create a controlmodel at the multiservicefactory of the dialog model...        
+            Object oListBoxModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlListBoxModel");
+            XMultiPropertySet xLBModelMPSet = (XMultiPropertySet) UnoRuntime.queryInterface(XMultiPropertySet.class, oListBoxModel);
+            // Set the properties at the model - keep in mind to pass the property names in alphabetical order!
+            xLBModelMPSet.setPropertyValues( 
+                new String[]  {"Dropdown", "Height", "Name", "PositionX", "PositionY", "ReadOnly", "Step", "StringItemList", "Width" } ,
+                new Object[] {Boolean.FALSE, new Integer(_nHeight), sName, new Integer(_nPosX), new Integer(_nPosY), Boolean.TRUE, new Integer(_nStep), _sStringItemList, new Integer(_nWidth)}); 
+            m_xDlgModelNameContainer.insertByName(sName, xLBModelMPSet);
+        }catch (com.sun.star.uno.Exception ex) {
+            throw new java.lang.RuntimeException("cannot happen...");
+        }
+        return xListBox;
+    }
+    
+
+    public void insertMultiLineFixedText(int _nPosX, int _nPosY, int _nWidth, int _nLineCount, int _nStep, String _sLabel) {
+        try { 
+            // create a unique name by means of an own implementation...
+            String sName = createUniqueName(m_xDlgModelNameContainer, "Label");
+            int nHeight = _nLineCount * nFixedTextHeight;
+            // create a controlmodel at the multiservicefactory of the dialog model...        
+            Object oFTModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlFixedTextModel");
+            XMultiPropertySet xFTModelMPSet = (XMultiPropertySet) UnoRuntime.queryInterface(XMultiPropertySet.class, oFTModel);
+            // Set the properties at the model - keep in mind to pass the property names in alphabetical order!
+            xFTModelMPSet.setPropertyValues(
+                new String[] {"Height", "Label", "MultiLine", "Name", "PositionX", "PositionY", "Step", "Width"},
+                new Object[] { new Integer(nHeight), _sLabel, Boolean.TRUE, sName, new Integer(_nPosX), new Integer(_nPosY), new Integer(_nStep), new Integer(_nWidth)});
+            // add the model to the NameContainer of the dialog model
+            m_xDlgModelNameContainer.insertByName(sName, oFTModel);
+        }catch (com.sun.star.uno.Exception ex){
+            /* perform individual exception handling here.
+             * Possible exception types are:
+             * com.sun.star.lang.IllegalArgumentException,
+             * com.sun.star.lang.WrappedTargetException,
+             * com.sun.star.container.ElementExistException,
+             * com.sun.star.beans.PropertyVetoException,
+             * com.sun.star.beans.UnknownPropertyException,
+             * com.sun.star.uno.Exception
+             */
+            ex.printStackTrace(System.out);
+        }
+    }
+
+}// end of class