path: root/unotools/source/config/startoptions.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*************************************************************************
 *
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * Copyright 2000, 2010 Oracle and/or its affiliates.
 *
 * OpenOffice.org - a multi-platform office productivity suite
 *
 * This file is part of OpenOffice.org.
 *
 * OpenOffice.org is free software: you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License version 3
 * only, as published by the Free Software Foundation.
 *
 * OpenOffice.org is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License version 3 for more details
 * (a copy is included in the LICENSE file that accompanied this code).
 *
 * You should have received a copy of the GNU Lesser General Public License
 * version 3 along with OpenOffice.org.  If not, see
 * <http://www.openoffice.org/license.html>
 * for a copy of the LGPLv3 License.
 *
 ************************************************************************/


#include <unotools/startoptions.hxx>
#include <unotools/configmgr.hxx>
#include <unotools/configitem.hxx>
#include <tools/debug.hxx>
#include <com/sun/star/uno/Any.hxx>
#include <com/sun/star/uno/Sequence.hxx>

#include <rtl/logfile.hxx>
#include "itemholder1.hxx"
//_________________________________________________________________________________________________________________
//  namespaces
//_________________________________________________________________________________________________________________

using namespace ::utl                   ;
using namespace ::rtl                   ;
using namespace ::osl                   ;
using namespace ::com::sun::star::uno   ;

//_________________________________________________________________________________________________________________
//  const
//_________________________________________________________________________________________________________________

#define DEFAULT_SHOWINTRO               sal_True
#define DEFAULT_CONNECTIONURL           OUString()

#define ROOTNODE_START                  OUString(RTL_CONSTASCII_USTRINGPARAM("Setup/Office" ))
#define PROPERTYNAME_SHOWINTRO          OUString(RTL_CONSTASCII_USTRINGPARAM("ooSetupShowIntro" ))
#define PROPERTYNAME_CONNECTIONURL      OUString(RTL_CONSTASCII_USTRINGPARAM("ooSetupConnectionURL" ))

#define PROPERTYHANDLE_SHOWINTRO        0
#define PROPERTYHANDLE_CONNECTIONURL    1

#define PROPERTYCOUNT                   2

//_________________________________________________________________________________________________________________
//  private declarations!
//_________________________________________________________________________________________________________________

class SvtStartOptions_Impl : public ConfigItem
{
    //-------------------------------------------------------------------------------------------------------------
    //  public methods
    //-------------------------------------------------------------------------------------------------------------

    public:

        //---------------------------------------------------------------------------------------------------------
        //  constructor / destructor
        //---------------------------------------------------------------------------------------------------------

         SvtStartOptions_Impl();
        ~SvtStartOptions_Impl();

        //---------------------------------------------------------------------------------------------------------
        //  overloaded methods of baseclass
        //---------------------------------------------------------------------------------------------------------

        /*-****************************************************************************************************//**
            @short      called for notify of configmanager
            @descr      These method is called from the ConfigManager before application ends or from the
                         PropertyChangeListener if the sub tree broadcasts changes. You must update your
                        internal values.

            @ATTENTION  We don't implement these method - because we support readonly values at runtime only!

            @seealso    baseclass ConfigItem

            @param      "seqPropertyNames" is the list of properties which should be updated.
            @return     -

            @onerror    -
        *//*-*****************************************************************************************************/

        virtual void Notify( const Sequence< OUString >& seqPropertyNames );

        /*-****************************************************************************************************//**
            @short      write changes to configuration
            @descr      These method writes the changed values into the sub tree
                        and should always called in our destructor to guarantee consistency of config data.

            @ATTENTION  We don't implement these method - because we support readonly values at runtime only!

            @seealso    baseclass ConfigItem

            @param      -
            @return     -

            @onerror    -
        *//*-*****************************************************************************************************/

        virtual void Commit();

        //---------------------------------------------------------------------------------------------------------
        //  public interface
        //---------------------------------------------------------------------------------------------------------

        /*-****************************************************************************************************//**
            @short      access method to get internal values
            @descr      These method give us a chance to regulate acces to ouer internal values.
                        It's not used in the moment - but it's possible for the feature!

            @seealso    -

            @param      -
            @return     -

            @onerror    -
        *//*-*****************************************************************************************************/

        OUString    GetConnectionURL(                       ) const ;
        void        SetConnectionURL( const OUString& sURL  )       ;

    //-------------------------------------------------------------------------------------------------------------
    //  private methods
    //-------------------------------------------------------------------------------------------------------------

    private:

        /*-****************************************************************************************************//**
            @short      return list of fix key names of ouer configuration management which represent oue module tree
            @descr      These methods return a static const list of key names. We need it to get needed values from our
                        configuration management. We return well known key names only - because the "UserData" node
                        is handled in a special way!

            @seealso    -

            @param      -
            @return     A list of needed configuration keys is returned.

            @onerror    -
        *//*-*****************************************************************************************************/

        static Sequence< OUString > impl_GetPropertyNames();

    //-------------------------------------------------------------------------------------------------------------
    //  private member
    //-------------------------------------------------------------------------------------------------------------

    private:

        sal_Bool    m_bShowIntro        ;   /// cache "ShowIntro" of Start section
        OUString    m_sConnectionURL    ;   /// cache "Connection" of Start section
};

//_________________________________________________________________________________________________________________
//  definitions
//_________________________________________________________________________________________________________________

//*****************************************************************************************************************
//  constructor
//*****************************************************************************************************************
SvtStartOptions_Impl::SvtStartOptions_Impl()
    // Init baseclasses first
    :   ConfigItem          ( ROOTNODE_START    )
    // Init member then.
    ,   m_bShowIntro        ( DEFAULT_SHOWINTRO )
{
    // Use our static list of configuration keys to get his values.
    Sequence< OUString >    seqNames    = impl_GetPropertyNames();
    Sequence< Any >         seqValues   = GetProperties( seqNames ) ;

    // Safe impossible cases.
    // We need values from ALL configuration keys.
    // Follow assignment use order of values in relation to our list of key names!
    DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtStartOptions_Impl::SvtStartOptions_Impl()\nI miss some values of configuration keys!\n" );

    // Copy values from list in right order to ouer internal member.
    sal_Int32 nPropertyCount    =   seqValues.getLength()   ;
    sal_Int32 nProperty         =   0                       ;
    for( nProperty=0; nProperty<nPropertyCount; ++nProperty )
    {
        // Safe impossible cases.
        // Check any for valid value.
        DBG_ASSERT( !(seqValues[nProperty].hasValue()==sal_False), "SvtStartOptions_Impl::SvtStartOptions_Impl()\nInvalid property value for property detected!\n" );
        switch( nProperty )
        {
            case PROPERTYHANDLE_SHOWINTRO       :   {
                                                            DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtStartOptions_Impl::SvtStartOptions_Impl()\nWho has changed the value type of \"Office.Common\\Start\\ShowIntro\"?" );
                                                        seqValues[nProperty] >>= m_bShowIntro;
                                                    }
                                                    break;

            case PROPERTYHANDLE_CONNECTIONURL   :   {
                                                         DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_STRING), "SvtStartOptions_Impl::SvtStartOptions_Impl()\nWho has changed the value type of \"Office.Common\\Start\\Connection\"?" );
                                                        seqValues[nProperty] >>= m_sConnectionURL;
                                                    }
                                                    break;
        }
    }

    // Don't enable notification mechanism of ouer baseclass!
    // We support readonly variables in the moment.
}

//*****************************************************************************************************************
//  destructor
//*****************************************************************************************************************
SvtStartOptions_Impl::~SvtStartOptions_Impl()
{
    // We must save our current values .. if user forget it!
    if( IsModified() == sal_True )
    {
        Commit();
    }
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtStartOptions_Impl::Notify( const Sequence< OUString >& seqPropertyNames )
{
    // Use given list of updated properties to get his values from configuration directly!
    Sequence< Any > seqValues = GetProperties( seqPropertyNames );
    // Safe impossible cases.
    // We need values from ALL notified configuration keys.
    DBG_ASSERT( !(seqPropertyNames.getLength()!=seqValues.getLength()), "SvtStartOptions_Impl::Notify()\nI miss some values of configuration keys!\n" );
    // Step over list of property names and get right value from coreesponding value list to set it on internal members!
    sal_Int32 nCount = seqPropertyNames.getLength();
    for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty )
    {
        if( seqPropertyNames[nProperty] == PROPERTYNAME_SHOWINTRO )
        {
            DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtStartOptions_Impl::Notify()\nWho has changed the value type of \"Office.Common\\Start\\ShowIntro\"?" );
            seqValues[nProperty] >>= m_bShowIntro;
        }
        else
        if( seqPropertyNames[nProperty] == PROPERTYNAME_CONNECTIONURL )
        {
            DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_STRING), "SvtStartOptions_Impl::Notify()\nWho has changed the value type of \"Office.Common\\Start\\Connection\"?" );
            seqValues[nProperty] >>= m_sConnectionURL;
        }
        #if OSL_DEBUG_LEVEL > 1
        else DBG_ASSERT( sal_False, "SvtStartOptions_Impl::Notify()\nUnkown property detected ... I can't handle these!\n" );
        #endif
    }
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtStartOptions_Impl::Commit()
{
    // Get names of supported properties, create a list for values and copy current values to it.
    Sequence< OUString >    seqNames    = impl_GetPropertyNames();
    sal_Int32               nCount      = seqNames.getLength();
    Sequence< Any >         seqValues   ( nCount );
    for( sal_Int32 nProperty=0; nProperty<nCount; ++nProperty )
    {
        switch( nProperty )
        {
            case PROPERTYHANDLE_SHOWINTRO       :   {
                                                         seqValues[nProperty] <<= m_bShowIntro;
                                                     }
                                                     break;
            case PROPERTYHANDLE_CONNECTIONURL   :   {
                                                         seqValues[nProperty] <<= m_sConnectionURL;
                                                     }
                                                     break;
        }
    }
    // Set properties in configuration.
    PutProperties( seqNames, seqValues );
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
OUString SvtStartOptions_Impl::GetConnectionURL() const
{
    return m_sConnectionURL;
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
void SvtStartOptions_Impl::SetConnectionURL( const OUString& sURL )
{
    m_sConnectionURL = sURL;
    SetModified();
}

//*****************************************************************************************************************
//  private method
//*****************************************************************************************************************
Sequence< OUString > SvtStartOptions_Impl::impl_GetPropertyNames()
{
    // Build list of configuration key names.
    const OUString pProperties[] =
    {
        PROPERTYNAME_SHOWINTRO      ,
        PROPERTYNAME_CONNECTIONURL  ,
    };
    // Initialize return sequence with these list ...
    const Sequence< OUString > seqPropertyNames( pProperties, PROPERTYCOUNT );
    // ... and return it.
    return seqPropertyNames;
}

//*****************************************************************************************************************
//  initialize static member
//  DON'T DO IT IN YOUR HEADER!
//  see definition for further informations
//*****************************************************************************************************************
SvtStartOptions_Impl*   SvtStartOptions::m_pDataContainer   = NULL  ;
sal_Int32               SvtStartOptions::m_nRefCount        = 0     ;

//*****************************************************************************************************************
//  constructor
//*****************************************************************************************************************
SvtStartOptions::SvtStartOptions()
{
    // Global access, must be guarded (multithreading!).
    MutexGuard aGuard( GetOwnStaticMutex() );
    // Increase ouer refcount ...
    ++m_nRefCount;
    // ... and initialize ouer data container only if it not already!
    if( m_pDataContainer == NULL )
    {
        RTL_LOGFILE_CONTEXT(aLog, "unotools ( ??? ) ::SvtStartOptions_Impl::ctor()");
        m_pDataContainer = new SvtStartOptions_Impl();

        ItemHolder1::holdConfigItem(E_STARTOPTIONS);
    }
}

//*****************************************************************************************************************
//  destructor
//*****************************************************************************************************************
SvtStartOptions::~SvtStartOptions()
{
    // Global access, must be guarded (multithreading!)
    MutexGuard aGuard( GetOwnStaticMutex() );
    // Decrease ouer refcount.
    --m_nRefCount;
    // If last instance was deleted ...
    // we must destroy ouer static data container!
    if( m_nRefCount <= 0 )
    {
        delete m_pDataContainer;
        m_pDataContainer = NULL;
    }
}

//*****************************************************************************************************************
//  public method
//*****************************************************************************************************************
OUString SvtStartOptions::GetConnectionURL() const
{
    MutexGuard aGuard( GetOwnStaticMutex() );
    return m_pDataContainer->GetConnectionURL();
}

namespace
{
    class theStartOptionsMutex : public rtl::Static<osl::Mutex, theStartOptionsMutex>{};
}

//*****************************************************************************************************************
//  private method
//*****************************************************************************************************************
Mutex& SvtStartOptions::GetOwnStaticMutex()
{
    return theStartOptionsMutex::get();
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */