/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include "mmgreetingspage.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace svt; using namespace ::com::sun::star; using namespace ::com::sun::star::uno; #define MM_DOCTYPE_OOO 1 #define MM_DOCTYPE_PDF 2 #define MM_DOCTYPE_WORD 3 #define MM_DOCTYPE_HTML 4 #define MM_DOCTYPE_TEXT 5 static OUString lcl_GetExtensionForDocType(sal_uLong nDocType) { OUString sExtension; switch( nDocType ) { case MM_DOCTYPE_OOO : sExtension = "odt"; break; case MM_DOCTYPE_PDF : sExtension = "pdf"; break; case MM_DOCTYPE_WORD: sExtension = "doc"; break; case MM_DOCTYPE_HTML: sExtension = "html"; break; case MM_DOCTYPE_TEXT: sExtension = "txt"; break; } return sExtension; } static OUString lcl_GetColumnValueOf(const OUString& rColumn, Reference < container::XNameAccess> const & rxColAccess ) { OUString sRet; try { if (rxColAccess->hasByName(rColumn)) { Any aCol = rxColAccess->getByName(rColumn); Reference< sdb::XColumn > xColumn; aCol >>= xColumn; if(xColumn.is()) sRet = xColumn->getString(); } } catch (const uno::Exception&) { } return sRet; } /** * Replace email server settings in rConfigItem with those set in Writer's global * mail merge config settings. */ static void lcl_UpdateEmailSettingsFromGlobalConfig(SwMailMergeConfigItem& rConfigItem) { // newly created SwMailMergeConfigItem is initialized with values from (global) config SwMailMergeConfigItem aConfigItem; // take over email-related settings rConfigItem.SetMailDisplayName(aConfigItem.GetMailDisplayName()); rConfigItem.SetMailAddress(aConfigItem.GetMailAddress()); rConfigItem.SetMailReplyTo(aConfigItem.GetMailReplyTo()); rConfigItem.SetMailReplyTo(aConfigItem.IsMailReplyTo()); rConfigItem.SetMailServer(aConfigItem.GetMailServer()); rConfigItem.SetMailPort(aConfigItem.GetMailPort()); rConfigItem.SetSecureConnection(aConfigItem.IsSecureConnection()); // authentication settings rConfigItem.SetAuthentication(aConfigItem.IsAuthentication()); rConfigItem.SetSMTPAfterPOP(aConfigItem.IsSMTPAfterPOP()); rConfigItem.SetMailUserName(aConfigItem.GetMailUserName()); rConfigItem.SetMailPassword(aConfigItem.GetMailPassword()); rConfigItem.SetInServerName(aConfigItem.GetInServerName()); rConfigItem.SetInServerPort(aConfigItem.GetInServerPort()); rConfigItem.SetInServerPOP(aConfigItem.IsInServerPOP()); rConfigItem.SetInServerUserName(aConfigItem.GetInServerUserName()); rConfigItem.SetInServerPassword(aConfigItem.GetInServerPassword()); } class SwSaveWarningBox_Impl : public SwMessageAndEditDialog { DECL_LINK( ModifyHdl, weld::Entry&, void); public: SwSaveWarningBox_Impl(weld::Window* pParent, const OUString& rFileName); OUString GetFileName() const { return m_xEdit->get_text(); } }; class SwSendQueryBox_Impl : public SwMessageAndEditDialog { bool bIsEmptyAllowed; DECL_LINK( ModifyHdl, weld::Entry&, void); public: SwSendQueryBox_Impl(weld::Window* pParent, const OString& rID, const OUString& rUIXMLDescription); void SetValue(const OUString& rSet) { m_xEdit->set_text(rSet); ModifyHdl(*m_xEdit); } OUString GetValue() const { return m_xEdit->get_text(); } void SetIsEmptyTextAllowed(bool bSet) { bIsEmptyAllowed = bSet; ModifyHdl(*m_xEdit); } }; SwSaveWarningBox_Impl::SwSaveWarningBox_Impl(weld::Window* pParent, const OUString& rFileName) : SwMessageAndEditDialog(pParent, "AlreadyExistsDialog", "modules/swriter/ui/alreadyexistsdialog.ui") { m_xEdit->set_text(rFileName); m_xEdit->connect_changed(LINK(this, SwSaveWarningBox_Impl, ModifyHdl)); INetURLObject aTmp(rFileName); m_xDialog->set_primary_text(m_xDialog->get_primary_text().replaceAll("%1", aTmp.getName( INetURLObject::LAST_SEGMENT, true, INetURLObject::DecodeMechanism::WithCharset))); ModifyHdl(*m_xEdit); } IMPL_LINK( SwSaveWarningBox_Impl, ModifyHdl, weld::Entry&, rEdit, void) { m_xOKPB->set_sensitive(!rEdit.get_text().isEmpty()); } SwSendQueryBox_Impl::SwSendQueryBox_Impl(weld::Window* pParent, const OString& rID, const OUString& rUIXMLDescription) : SwMessageAndEditDialog(pParent, rID, rUIXMLDescription) , bIsEmptyAllowed(true) { m_xEdit->connect_changed(LINK(this, SwSendQueryBox_Impl, ModifyHdl)); ModifyHdl(*m_xEdit); } IMPL_LINK( SwSendQueryBox_Impl, ModifyHdl, weld::Entry&, rEdit, void) { m_xOKPB->set_sensitive(bIsEmptyAllowed || !rEdit.get_text().isEmpty()); } class SwCopyToDialog : public SfxDialogController { std::unique_ptr m_xCCED; std::unique_ptr m_xBCCED; public: explicit SwCopyToDialog(weld::Window* pParent) : SfxDialogController(pParent, "modules/swriter/ui/ccdialog.ui", "CCDialog") , m_xCCED(m_xBuilder->weld_entry("cc")) , m_xBCCED(m_xBuilder->weld_entry("bcc")) { } OUString GetCC() const {return m_xCCED->get_text();} void SetCC(const OUString& rSet) {m_xCCED->set_text(rSet);} OUString GetBCC() const {return m_xBCCED->get_text();} void SetBCC(const OUString& rSet) {m_xBCCED->set_text(rSet);} }; SwMMResultSaveDialog::SwMMResultSaveDialog(weld::Window* pParent) : SfxDialogController(pParent, "modules/swriter/ui/mmresultsavedialog.ui", "MMResultSaveDialog") , m_bCancelSaving(false) , m_xSaveAsOneRB(m_xBuilder->weld_radio_button("singlerb")) , m_xSaveIndividualRB(m_xBuilder->weld_radio_button("individualrb")) , m_xFromRB(m_xBuilder->weld_radio_button("fromrb")) , m_xFromNF(m_xBuilder->weld_spin_button("from")) , m_xToFT(m_xBuilder->weld_label("toft")) , m_xToNF(m_xBuilder->weld_spin_button("to")) , m_xOKButton(m_xBuilder->weld_button("ok")) { Link aLink = LINK(this, SwMMResultSaveDialog, DocumentSelectionHdl_Impl); m_xSaveAsOneRB->connect_toggled(aLink); m_xSaveIndividualRB->connect_toggled(aLink); m_xFromRB->connect_toggled(aLink); // m_pSaveAsOneRB is the default, so disable m_xFromNF and m_xToNF initially. aLink.Call(*m_xSaveAsOneRB); SwView* pView = ::GetActiveView(); const std::shared_ptr& xConfigItem = pView->GetMailMergeConfigItem(); assert(xConfigItem); sal_Int32 nCount = xConfigItem->GetMergedDocumentCount(); m_xFromNF->set_max(nCount); m_xToNF->set_max(nCount); m_xToNF->set_value(nCount); m_xOKButton->connect_clicked(LINK(this, SwMMResultSaveDialog, SaveOutputHdl_Impl)); } SwMMResultSaveDialog::~SwMMResultSaveDialog() { } SwMMResultPrintDialog::SwMMResultPrintDialog(weld::Window* pParent) : SfxDialogController(pParent, "modules/swriter/ui/mmresultprintdialog.ui", "MMResultPrintDialog") , m_xPrinterFT(m_xBuilder->weld_label("printerft")) , m_xPrinterLB(m_xBuilder->weld_combo_box("printers")) , m_xPrinterSettingsPB(m_xBuilder->weld_button("printersettings")) , m_xPrintAllRB(m_xBuilder->weld_radio_button("printallrb")) , m_xFromRB(m_xBuilder->weld_radio_button("fromrb")) , m_xFromNF(m_xBuilder->weld_spin_button("from")) , m_xToFT(m_xBuilder->weld_label("toft")) , m_xToNF(m_xBuilder->weld_spin_button("to")) , m_xOKButton(m_xBuilder->weld_button("ok")) { m_xPrinterLB->make_sorted(); m_xPrinterLB->connect_changed(LINK(this, SwMMResultPrintDialog, PrinterChangeHdl_Impl)); m_xPrinterSettingsPB->connect_clicked(LINK(this, SwMMResultPrintDialog, PrinterSetupHdl_Impl)); Link aLink = LINK(this, SwMMResultPrintDialog, DocumentSelectionHdl_Impl); m_xPrintAllRB->connect_toggled(aLink); m_xFromRB->connect_toggled(aLink); // m_pPrintAllRB is the default, so disable m_xFromNF and m_xToNF initially. aLink.Call(*m_xPrintAllRB); m_xOKButton->connect_clicked(LINK(this, SwMMResultPrintDialog, PrintHdl_Impl)); FillInPrinterSettings(); } SwMMResultPrintDialog::~SwMMResultPrintDialog() { } SwMMResultEmailDialog::SwMMResultEmailDialog(weld::Window* pParent) : SfxDialogController(pParent, "modules/swriter/ui/mmresultemaildialog.ui", "MMResultEmailDialog") , m_sConfigureMail(SwResId(ST_CONFIGUREMAIL)) , m_xMailToFT(m_xBuilder->weld_label("mailtoft")) , m_xMailToLB(m_xBuilder->weld_combo_box("mailto")) , m_xCopyToPB(m_xBuilder->weld_button("copyto")) , m_xSubjectFT(m_xBuilder->weld_label("subjectft")) , m_xSubjectED(m_xBuilder->weld_entry("subject")) , m_xSendAsFT(m_xBuilder->weld_label("sendasft")) , m_xSendAsLB(m_xBuilder->weld_combo_box("sendas")) , m_xSendAsPB(m_xBuilder->weld_button("sendassettings")) , m_xAttachmentGroup(m_xBuilder->weld_widget("attachgroup")) , m_xAttachmentED(m_xBuilder->weld_entry("attach")) , m_xSendAllRB(m_xBuilder->weld_radio_button("sendallrb")) , m_xFromRB(m_xBuilder->weld_radio_button("fromrb")) , m_xFromNF(m_xBuilder->weld_spin_button("from")) , m_xToFT(m_xBuilder->weld_label("toft")) , m_xToNF(m_xBuilder->weld_spin_button("to")) , m_xOKButton(m_xBuilder->weld_button("ok")) { m_xCopyToPB->connect_clicked(LINK(this, SwMMResultEmailDialog, CopyToHdl_Impl)); m_xSendAsPB->connect_clicked(LINK(this, SwMMResultEmailDialog, SendAsHdl_Impl)); m_xSendAsLB->connect_changed(LINK(this, SwMMResultEmailDialog, SendTypeHdl_Impl)); Link aLink = LINK(this, SwMMResultEmailDialog, DocumentSelectionHdl_Impl); m_xSendAllRB->connect_toggled(aLink); m_xFromRB->connect_toggled(aLink); // m_xSendAllRB is the default, so disable m_xFromNF and m_xToNF initially. aLink.Call(*m_xSendAllRB); m_xOKButton->connect_clicked(LINK(this, SwMMResultEmailDialog, SendDocumentsHdl_Impl)); FillInEmailSettings(); } SwMMResultEmailDialog::~SwMMResultEmailDialog() { } void SwMMResultPrintDialog::FillInPrinterSettings() { //fill printer ListBox SwView* pView = ::GetActiveView(); const std::shared_ptr& xConfigItem = pView->GetMailMergeConfigItem(); const std::vector& rPrinters = Printer::GetPrinterQueues(); unsigned int nCount = rPrinters.size(); bool bMergePrinterExists = false; for (unsigned int i = 0; i < nCount; ++i) { m_xPrinterLB->append_text( rPrinters[i] ); if( !bMergePrinterExists && rPrinters[i] == xConfigItem->GetSelectedPrinter() ) bMergePrinterExists = true; } assert(xConfigItem); if(!bMergePrinterExists) { SfxPrinter* pPrinter = pView->GetWrtShell().getIDocumentDeviceAccess().getPrinter( true ); m_xPrinterLB->set_active_text(pPrinter->GetName()); } else { m_xPrinterLB->set_active_text(xConfigItem->GetSelectedPrinter()); } PrinterChangeHdl_Impl(*m_xPrinterLB); sal_Int32 count = xConfigItem->GetMergedDocumentCount(); m_xToNF->set_value(count); m_xToNF->set_max(count); } void SwMMResultEmailDialog::FillInEmailSettings() { SwView* pView = ::GetActiveView(); const std::shared_ptr& xConfigItem = pView->GetMailMergeConfigItem(); assert(xConfigItem); SwView* pSourceView = xConfigItem->GetSourceView(); OSL_ENSURE(pSourceView, "no source view exists"); if (pSourceView) { SwDocShell* pDocShell = pSourceView->GetDocShell(); if (pDocShell->HasName()) { INetURLObject aTmp(pDocShell->GetMedium()->GetName()); m_xAttachmentED->set_text(aTmp.getName( INetURLObject::LAST_SEGMENT, true, INetURLObject::DecodeMechanism::WithCharset )); } } if (m_xAttachmentED->get_text().isEmpty()) { OUString sAttach = "." + lcl_GetExtensionForDocType(m_xSendAsLB->get_active_id().toUInt32()); m_xAttachmentED->set_text(sAttach); } //fill mail address ListBox if (m_xMailToLB->get_count()) return; //select first column uno::Reference< sdbcx::XColumnsSupplier > xColsSupp(xConfigItem->GetResultSet(), uno::UNO_QUERY); //get the name of the actual columns uno::Reference < container::XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr; uno::Sequence< OUString > aFields; if (xColAccess.is()) aFields = xColAccess->getElementNames(); for (const OUString& rField : std::as_const(aFields)) m_xMailToLB->append_text(rField); m_xMailToLB->set_active(0); // then select the right one - may not be available const std::vector>& rHeaders = xConfigItem->GetDefaultAddressHeaders(); OUString sEMailColumn = rHeaders[MM_PART_E_MAIL].first; Sequence< OUString> aAssignment = xConfigItem->GetColumnAssignment(xConfigItem->GetCurrentDBData()); if (aAssignment.getLength() > MM_PART_E_MAIL && !aAssignment[MM_PART_E_MAIL].isEmpty()) sEMailColumn = aAssignment[MM_PART_E_MAIL]; m_xMailToLB->set_active_text(sEMailColumn); // HTML format pre-selected m_xSendAsLB->set_active(3); SendTypeHdl_Impl(*m_xSendAsLB); } IMPL_LINK_NOARG(SwMMResultSaveDialog, DocumentSelectionHdl_Impl, weld::ToggleButton&, void) { bool bEnableFromTo = m_xFromRB->get_active(); m_xFromNF->set_sensitive(bEnableFromTo); m_xToFT->set_sensitive(bEnableFromTo); m_xToNF->set_sensitive(bEnableFromTo); } IMPL_LINK_NOARG(SwMMResultPrintDialog, DocumentSelectionHdl_Impl, weld::ToggleButton&, void) { bool bEnableFromTo = m_xFromRB->get_active(); m_xFromNF->set_sensitive(bEnableFromTo); m_xToFT->set_sensitive(bEnableFromTo); m_xToNF->set_sensitive(bEnableFromTo); } IMPL_LINK_NOARG(SwMMResultEmailDialog, DocumentSelectionHdl_Impl, weld::ToggleButton&, void) { bool bEnableFromTo = m_xFromRB->get_active(); m_xFromNF->set_sensitive(bEnableFromTo); m_xToFT->set_sensitive(bEnableFromTo); m_xToNF->set_sensitive(bEnableFromTo); } IMPL_LINK_NOARG(SwMMResultEmailDialog, CopyToHdl_Impl, weld::Button&, void) { SwCopyToDialog aDlg(m_xDialog.get()); aDlg.SetCC(m_sCC ); aDlg.SetBCC(m_sBCC); if (aDlg.run() == RET_OK) { m_sCC = aDlg.GetCC() ; m_sBCC = aDlg.GetBCC(); } } namespace { int documentStartPageNumber(SwMailMergeConfigItem* pConfigItem, int document, bool bIgnoreEmpty) { SwView* pTargetView = pConfigItem->GetTargetView(); assert( pTargetView ); SwCursorShell& shell = pTargetView->GetWrtShell(); const SwDocMergeInfo& info = pConfigItem->GetDocumentMergeInfo(document); sal_uInt16 page; shell.Push(); shell.GotoMark( info.startPageInTarget ); if (!bIgnoreEmpty) shell.GetPageNum(page, o3tl::temporary(sal_uInt16())); else page = shell.GetPageNumSeqNonEmpty(); shell.Pop(SwCursorShell::PopMode::DeleteCurrent); return page; } int documentEndPageNumber(SwMailMergeConfigItem* pConfigItem, int document, bool bIgnoreEmpty) { SwView* pTargetView = pConfigItem->GetTargetView(); assert( pTargetView ); SwWrtShell& shell = pTargetView->GetWrtShell(); shell.Push(); if (document < int(pConfigItem->GetMergedDocumentCount()) - 1) { // Go to the page before the starting page of the next merged document. const SwDocMergeInfo& info = pConfigItem->GetDocumentMergeInfo( document + 1 ); shell.GotoMark( info.startPageInTarget ); shell.EndPrvPg(); } else { // This is the last merged document, so it ends on the page at which the document ends. shell.SttEndDoc( false ); // go to doc end } sal_uInt16 page; if (!bIgnoreEmpty) shell.GetPageNum(page, o3tl::temporary(sal_uInt16())); else page = shell.GetPageNumSeqNonEmpty(); shell.Pop(SwCursorShell::PopMode::DeleteCurrent); return page; } } // anonymous namespace IMPL_LINK_NOARG(SwMMResultSaveDialog, SaveOutputHdl_Impl, weld::Button&, void) { SwView* pView = ::GetActiveView(); std::shared_ptr xConfigItem = pView->GetMailMergeConfigItem(); assert(xConfigItem); if (!xConfigItem->GetTargetView()) SwDBManager::PerformMailMerge(pView); SwView* pTargetView = xConfigItem->GetTargetView(); assert(pTargetView); OUString sFilter; OUString sPath = SwMailMergeHelper::CallSaveAsDialog(m_xDialog.get(), sFilter); if (sPath.isEmpty()) { // just return back to the dialog return; } if (m_xSaveAsOneRB->get_active()) { uno::Sequence< beans::PropertyValue > aValues(1); beans::PropertyValue* pValues = aValues.getArray(); pValues[0].Name = "FilterName"; pValues[0].Value <<= sFilter; uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY); ErrCode nErrorCode = ERRCODE_NONE; try { xStore->storeToURL( sPath, aValues ); } catch (const task::ErrorCodeIOException& rErrorEx) { nErrorCode = ErrCode(rErrorEx.ErrCode); } catch (const Exception&) { nErrorCode = ERRCODE_IO_GENERAL; } if( nErrorCode != ERRCODE_NONE ) { SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC, pTargetView->GetDocShell()->GetTitle()); ErrorHandler::HandleError( nErrorCode ); } } else { const sal_uInt32 nDocumentCount = xConfigItem->GetMergedDocumentCount(); sal_uInt32 nBegin = 0; sal_uInt32 nEnd = nDocumentCount; if (!m_xSaveIndividualRB->get_active()) { nBegin = static_cast< sal_Int32 >(m_xFromNF->get_value() - 1); nEnd = static_cast< sal_Int32 >(m_xToNF->get_value()); if(nEnd > nDocumentCount) nEnd = nDocumentCount; } OUString sTargetTempURL = URIHelper::SmartRel2Abs( INetURLObject(), utl::TempFile::CreateTempName(), URIHelper::GetMaybeFileHdl()); std::shared_ptr pSfxFlt = SwIoSystem::GetFilterOfFormat( FILTER_XML, SwDocShell::Factory().GetFilterContainer() ); uno::Sequence< beans::PropertyValue > aValues(1); beans::PropertyValue* pValues = aValues.getArray(); pValues[0].Name = "FilterName"; pValues[0].Value <<= pSfxFlt->GetFilterName(); uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY); ErrCode nErrorCode = ERRCODE_NONE; try { xStore->storeToURL( sTargetTempURL, aValues ); } catch (const task::ErrorCodeIOException& rErrorEx) { nErrorCode = ErrCode(rErrorEx.ErrCode); } catch (const Exception&) { nErrorCode = ERRCODE_IO_GENERAL; } if( nErrorCode != ERRCODE_NONE ) { SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC, pTargetView->GetDocShell()->GetTitle()); ErrorHandler::HandleError( nErrorCode ); } SwView* pSourceView = xConfigItem->GetSourceView(); std::shared_ptr xSaveMonitor(new SaveMonitor(m_xDialog.get())); xSaveMonitor->m_xDocName->set_label(pSourceView->GetDocShell()->GetTitle(22)); xSaveMonitor->m_xPrinter->set_label( INetURLObject( sPath ).getFSysPath( FSysStyle::Detect ) ); m_bCancelSaving = false; weld::DialogController::runAsync(xSaveMonitor, [this, &xSaveMonitor](sal_Int32 nResult){ if (nResult == RET_CANCEL) m_bCancelSaving = true; xSaveMonitor.reset(); }); for(sal_uInt32 nDoc = nBegin; nDoc < nEnd && !m_bCancelSaving; ++nDoc) { INetURLObject aURL(sPath); OUString sExtension = aURL.getExtension(); if (sExtension.isEmpty()) { sExtension = pSfxFlt->GetWildcard().getGlob().getToken(1, '.'); sPath += "." + sExtension; } OUString sStat = SwResId(STR_STATSTR_LETTER) + " " + OUString::number( nDoc ); xSaveMonitor->m_xPrintInfo->set_label(sStat); //now extract a document from the target document // the shell will be closed at the end, but it is more safe to use SfxObjectShellLock here SfxObjectShellLock xTempDocShell( new SwDocShell( SfxObjectCreateMode::STANDARD ) ); xTempDocShell->DoInitNew(); SfxViewFrame* pTempFrame = SfxViewFrame::LoadHiddenDocument( *xTempDocShell, SFX_INTERFACE_NONE ); SwView* pTempView = static_cast( pTempFrame->GetViewShell() ); pTargetView->GetWrtShell().StartAction(); SwgReaderOption aOpt; aOpt.SetTextFormats( true ); aOpt.SetFrameFormats( true ); aOpt.SetPageDescs( true ); aOpt.SetNumRules( true ); aOpt.SetMerge( false ); pTempView->GetDocShell()->LoadStylesFromFile( sTargetTempURL, aOpt, true ); pTempView->GetDocShell()->GetDoc()->ReplaceCompatibilityOptions( *pTargetView->GetDocShell()->GetDoc()); pTempView->GetDocShell()->GetDoc()->ReplaceDefaults( *pTargetView->GetDocShell()->GetDoc()); pTempView->GetDocShell()->GetDoc()->ReplaceDocumentProperties( *pTargetView->GetDocShell()->GetDoc(), true ); pTargetView->GetWrtShell().PastePages( pTempView->GetWrtShell(), documentStartPageNumber(xConfigItem.get(), nDoc, false), documentEndPageNumber(xConfigItem.get(), nDoc, false)); pTargetView->GetWrtShell().EndAction(); //then save it OUString sOutPath = aURL.GetMainURL(INetURLObject::DecodeMechanism::ToIUri); OUString sCounter = "_" + OUString::number(nDoc + 1); sOutPath = sOutPath.replaceAt( sOutPath.getLength() - sExtension.getLength() - 1, 0, sCounter); while(true) { //time for other slots is needed Application::Reschedule( true ); bool bFailed = false; try { pValues[0].Value <<= sFilter; uno::Reference< frame::XStorable > xTempStore( xTempDocShell->GetModel(), uno::UNO_QUERY); xTempStore->storeToURL( sOutPath, aValues ); } catch (const uno::Exception&) { bFailed = true; } if(bFailed) { std::unique_ptr xWarning(new SwSaveWarningBox_Impl(m_xDialog.get(), sOutPath)); if (RET_OK == xWarning->run()) sOutPath = xWarning->GetFileName(); else { xTempDocShell->DoClose(); m_xDialog->response(RET_OK); return; } } else { xTempDocShell->DoClose(); m_xDialog->response(RET_OK); break; } } } if (xSaveMonitor) xSaveMonitor->response(RET_OK); ::osl::File::remove( sTargetTempURL ); } m_xDialog->response(RET_OK); } IMPL_LINK(SwMMResultPrintDialog, PrinterChangeHdl_Impl, weld::ComboBox&, rBox, void) { SwView* pView = ::GetActiveView(); const std::shared_ptr& xConfigItem = pView->GetMailMergeConfigItem(); assert(xConfigItem); if (rBox.get_active() != -1) { const QueueInfo* pInfo = Printer::GetQueueInfo( rBox.get_active_text(), false ); if( pInfo ) { if ( !m_pTempPrinter ) { m_pTempPrinter = VclPtr::Create( *pInfo ); } else { if( (m_pTempPrinter->GetName() != pInfo->GetPrinterName()) || (m_pTempPrinter->GetDriverName() != pInfo->GetDriver()) ) { m_pTempPrinter.disposeAndClear(); m_pTempPrinter = VclPtr::Create( *pInfo ); } } } else if( ! m_pTempPrinter ) m_pTempPrinter = VclPtr::Create(); m_xPrinterSettingsPB->set_sensitive(m_pTempPrinter->HasSupport(PrinterSupport::SetupDialog)); } else m_xPrinterSettingsPB->set_sensitive(false); xConfigItem->SetSelectedPrinter(rBox.get_active_text()); } IMPL_LINK_NOARG(SwMMResultPrintDialog, PrintHdl_Impl, weld::Button&, void) { SwView* pView = ::GetActiveView(); std::shared_ptr xConfigItem = pView->GetMailMergeConfigItem(); assert(xConfigItem); if(!xConfigItem->GetTargetView()) SwDBManager::PerformMailMerge(pView); SwView* pTargetView = xConfigItem->GetTargetView(); assert(pTargetView); const sal_uInt32 nDocumentCount = xConfigItem->GetMergedDocumentCount(); sal_uInt32 nBegin = 0; sal_uInt32 nEnd = nDocumentCount; if (!m_xPrintAllRB->get_active()) { nBegin = m_xFromNF->get_value() - 1; nEnd = m_xToNF->get_value(); if(nEnd > nDocumentCount) nEnd = nDocumentCount; } // If we skip autoinserted blanks, then the page numbers used in the print range string // refer to the non-blank pages as they appear in the document (see tdf#89708). const bool bIgnoreEmptyPages = !pTargetView->GetDocShell()->GetDoc()->getIDocumentDeviceAccess().getPrintData().IsPrintEmptyPages(); const int nStartPage = documentStartPageNumber(xConfigItem.get(), nBegin, bIgnoreEmptyPages); const int nEndPage = documentEndPageNumber(xConfigItem.get(), nEnd - 1, bIgnoreEmptyPages); const OUString sPages(OUString::number(nStartPage) + "-" + OUString::number(nEndPage)); pTargetView->SetMailMergeConfigItem(xConfigItem); if(m_pTempPrinter) { SfxPrinter *const pDocumentPrinter = pTargetView->GetWrtShell() .getIDocumentDeviceAccess().getPrinter(true); pDocumentPrinter->SetPrinterProps(m_pTempPrinter); // this should be able to handle setting its own printer pTargetView->SetPrinter(pDocumentPrinter); } SfxObjectShell* pObjSh = pTargetView->GetViewFrame()->GetObjectShell(); SfxGetpApp()->NotifyEvent(SfxEventHint(SfxEventHintId::SwMailMerge, SwDocShell::GetEventName(STR_SW_EVENT_MAIL_MERGE), pObjSh)); uno::Sequence < beans::PropertyValue > aProps( 2 ); aProps[0]. Name = "MonitorVisible"; aProps[0].Value <<= true; aProps[1]. Name = "Pages"; aProps[1]. Value <<= sPages; pTargetView->ExecPrint( aProps, false, true ); SfxGetpApp()->NotifyEvent(SfxEventHint(SfxEventHintId::SwMailMergeEnd, SwDocShell::GetEventName(STR_SW_EVENT_MAIL_MERGE_END), pObjSh)); m_xDialog->response(RET_OK); } IMPL_LINK_NOARG(SwMMResultPrintDialog, PrinterSetupHdl_Impl, weld::Button&, void) { if (m_pTempPrinter) m_pTempPrinter->Setup(m_xDialog.get()); } IMPL_LINK(SwMMResultEmailDialog, SendTypeHdl_Impl, weld::ComboBox&, rBox, void) { auto nDocType = rBox.get_active_id().toUInt32(); bool bEnable = MM_DOCTYPE_HTML != nDocType && MM_DOCTYPE_TEXT != nDocType; m_xSendAsPB->set_sensitive(bEnable); m_xAttachmentGroup->set_sensitive(bEnable); if(bEnable) { //add the correct extension OUString sAttach(m_xAttachmentED->get_text()); //do nothing if the user has removed the name - the warning will come early enough if (!sAttach.isEmpty()) { sal_Int32 nTokenCount = comphelper::string::getTokenCount(sAttach, '.'); if( 2 > nTokenCount) { sAttach += "."; ++nTokenCount; } sAttach = comphelper::string::setToken(sAttach, nTokenCount - 1, '.', lcl_GetExtensionForDocType( nDocType )); m_xAttachmentED->set_text(sAttach); } } } IMPL_LINK_NOARG(SwMMResultEmailDialog, SendAsHdl_Impl, weld::Button&, void) { SwMailBodyDialog aDlg(m_xDialog.get()); aDlg.SetBody(m_sBody); if (RET_OK == aDlg.run()) { m_sBody = aDlg.GetBody(); } } // Send documents as e-mail IMPL_LINK_NOARG(SwMMResultEmailDialog, SendDocumentsHdl_Impl, weld::Button&, void) { SwView* pView = ::GetActiveView(); std::shared_ptr xConfigItem = pView->GetMailMergeConfigItem(); assert(xConfigItem); if (!xConfigItem->GetTargetView()) SwDBManager::PerformMailMerge(pView); //get the composed document SwView* pTargetView = xConfigItem->GetTargetView(); SAL_WARN_IF(!pTargetView, "sw.ui", "No TargetView in SwMailMergeConfigItem"); if (xConfigItem->GetMailServer().isEmpty() || !SwMailMergeHelper::CheckMailAddress(xConfigItem->GetMailAddress()) ) { std::unique_ptr xQueryBox(Application::CreateMessageDialog(m_xDialog.get(), VclMessageType::Question, VclButtonsType::YesNo, m_sConfigureMail)); xQueryBox->add_button(GetStandardText(StandardButtonType::Cancel), RET_CANCEL); sal_uInt16 nRet = xQueryBox->run(); if (RET_YES == nRet ) { SwView* pConfigView = pTargetView ? pTargetView : pView; SfxAllItemSet aSet(pConfigView->GetPool()); SwMailConfigDlg aDlg(m_xDialog.get(), aSet); nRet = aDlg.run(); } if(nRet != RET_OK && nRet != RET_YES) return; // back to the dialog // SwMailConfigDlg writes mail merge email settings only to (global) config, // so copy them to the existing config item lcl_UpdateEmailSettingsFromGlobalConfig(*xConfigItem); } //add the documents const sal_uInt32 nDocumentCount = xConfigItem->GetMergedDocumentCount(); sal_uInt32 nBegin = 0; sal_uInt32 nEnd = nDocumentCount; if (!m_xSendAllRB->get_active()) { nBegin = static_cast< sal_Int32 >(m_xFromNF->get_value() - 1); nEnd = static_cast< sal_Int32 >(m_xToNF->get_value()); if(nEnd > nDocumentCount) nEnd = nDocumentCount; } bool bAsBody = false; rtl_TextEncoding eEncoding = ::osl_getThreadTextEncoding(); SfxFilterContainer* pFilterContainer = SwDocShell::Factory().GetFilterContainer(); std::shared_ptr pSfxFlt; auto nDocType = m_xSendAsLB->get_active_id().toUInt32(); OUString sExtension = lcl_GetExtensionForDocType(nDocType); switch( nDocType ) { case MM_DOCTYPE_OOO: { //Make sure we don't pick e.g. the flat xml filter //for this format pSfxFlt = SwIoSystem::GetFilterOfFormat( FILTER_XML, SwDocShell::Factory().GetFilterContainer() ); } break; case MM_DOCTYPE_PDF: { pSfxFlt = pFilterContainer->GetFilter4FilterName( "writer_pdf_Export", SfxFilterFlags::EXPORT); } break; case MM_DOCTYPE_WORD: { //the method SwIOSystemGetFilterOfFormat( ) returns the template filter //because it uses the same user data :-( SfxFilterMatcher aMatcher( pFilterContainer->GetName() ); SfxFilterMatcherIter aIter( aMatcher ); std::shared_ptr pFilter = aIter.First(); while ( pFilter ) { if( pFilter->GetUserData() == FILTER_WW8 && pFilter->CanExport() ) { pSfxFlt = pFilter; break; } pFilter = aIter.Next(); } } break; case MM_DOCTYPE_HTML: { bAsBody = true; SvxHtmlOptions& rHtmlOptions = SvxHtmlOptions::Get(); eEncoding = rHtmlOptions.GetTextEncoding(); } break; case MM_DOCTYPE_TEXT: { bAsBody = true; pSfxFlt = pFilterContainer->GetFilter4FilterName( "Text (encoded)", SfxFilterFlags::EXPORT); } break; } if(!pSfxFlt) pSfxFlt = pFilterContainer->GetFilter4Extension(sExtension, SfxFilterFlags::EXPORT); if(!pSfxFlt) { m_xDialog->response(RET_OK); return; } OUString sMimeType = pSfxFlt->GetMimeType(); if (m_xSubjectED->get_text().isEmpty()) { std::unique_ptr xQuery(new SwSendQueryBox_Impl(m_xDialog.get(), "SubjectDialog", "modules/swriter/ui/subjectdialog.ui")); xQuery->SetIsEmptyTextAllowed(true); xQuery->SetValue(""); if(RET_OK == xQuery->run()) { if (!xQuery->GetValue().isEmpty()) m_xSubjectED->set_text(xQuery->GetValue()); } else return; // back to the dialog } if(!bAsBody && m_xAttachmentED->get_text().isEmpty()) { std::unique_ptr xQuery(new SwSendQueryBox_Impl(m_xDialog.get(), "AttachNameDialog", "modules/swriter/ui/attachnamedialog.ui")); xQuery->SetIsEmptyTextAllowed(false); if (RET_OK == xQuery->run()) { OUString sAttach(xQuery->GetValue()); sal_Int32 nTokenCount = comphelper::string::getTokenCount(sAttach, '.'); if (2 > nTokenCount) { sAttach += "."; ++nTokenCount; } sAttach = comphelper::string::setToken(sAttach, nTokenCount - 1, '.', lcl_GetExtensionForDocType( m_xSendAsLB->get_active_id().toUInt32())); m_xAttachmentED->set_text(sAttach); } else return; // back to the dialog } OUString sEMailColumn = m_xMailToLB->get_active_text(); OSL_ENSURE( !sEMailColumn.isEmpty(), "No email column selected"); Reference< sdbcx::XColumnsSupplier > xColsSupp( xConfigItem->GetResultSet(), UNO_QUERY); Reference < container::XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr; if(sEMailColumn.isEmpty() || !xColAccess.is() || !xColAccess->hasByName(sEMailColumn)) { m_xDialog->response(RET_OK); return; } OUString sFilterOptions; if(MM_DOCTYPE_TEXT == nDocType) { SwAsciiOptions aOpt; sal_uInt16 nAppScriptType = SvtLanguageOptions::GetI18NScriptTypeOfLanguage( GetAppLanguage() ); sal_uInt16 nWhich = GetWhichOfScript( RES_CHRATR_LANGUAGE, nAppScriptType); aOpt.SetLanguage( static_cast(pTargetView->GetWrtShell(). GetDefault( nWhich )).GetLanguage()); aOpt.SetParaFlags( LINEEND_CR ); aOpt.WriteUserData( sFilterOptions ); } else if(MM_DOCTYPE_HTML == nDocType) { sFilterOptions = "EmbedImages"; } OUString sTargetTempURL = URIHelper::SmartRel2Abs( INetURLObject(), utl::TempFile::CreateTempName(), URIHelper::GetMaybeFileHdl()); std::shared_ptr pTargetSfxFlt = SwIoSystem::GetFilterOfFormat( FILTER_XML, SwDocShell::Factory().GetFilterContainer() ); uno::Sequence< beans::PropertyValue > aValues(1); beans::PropertyValue* pValues = aValues.getArray(); pValues[0].Name = "FilterName"; pValues[0].Value <<= pTargetSfxFlt->GetFilterName(); uno::Reference< frame::XStorable > xStore( pTargetView->GetDocShell()->GetModel(), uno::UNO_QUERY); xStore->storeToURL( sTargetTempURL, aValues ); //create the send dialog vcl::Window* pParent = Application::GetDefDialogParent(); std::shared_ptr xDlg = std::make_shared(pParent ? pParent->GetFrameWeld() : nullptr, *xConfigItem); xDlg->StartSend(nEnd - nBegin); weld::DialogController::runAsync(xDlg, [](sal_Int32 /*nResult*/){}); //help to force painting the dialog //TODO/CLEANUP //predetermined breaking point Application::Reschedule( true ); m_xDialog->response(RET_OK); for(sal_uInt32 nDoc = nBegin; nDoc < nEnd; ++nDoc) { SwDocMergeInfo& rInfo = xConfigItem->GetDocumentMergeInfo(nDoc); //now extract a document from the target document // the shell will be closed at the end, but it is more safe to use SfxObjectShellLock here SfxObjectShellLock xTempDocShell( new SwDocShell( SfxObjectCreateMode::STANDARD ) ); xTempDocShell->DoInitNew(); SfxViewFrame* pTempFrame = SfxViewFrame::LoadHiddenDocument( *xTempDocShell, SFX_INTERFACE_NONE ); SwView* pTempView = static_cast( pTempFrame->GetViewShell() ); pTargetView->GetWrtShell().StartAction(); SwgReaderOption aOpt; aOpt.SetTextFormats( true ); aOpt.SetFrameFormats( true ); aOpt.SetPageDescs( true ); aOpt.SetNumRules( true ); aOpt.SetMerge( false ); pTempView->GetDocShell()->LoadStylesFromFile( sTargetTempURL, aOpt, true ); pTempView->GetDocShell()->GetDoc()->ReplaceCompatibilityOptions( *pTargetView->GetDocShell()->GetDoc()); pTempView->GetDocShell()->GetDoc()->ReplaceDefaults( *pTargetView->GetDocShell()->GetDoc()); pTempView->GetDocShell()->GetDoc()->ReplaceDocumentProperties( *pTargetView->GetDocShell()->GetDoc(), true ); pTargetView->GetWrtShell().PastePages( pTempView->GetWrtShell(), documentStartPageNumber(xConfigItem.get(), nDoc, false), documentEndPageNumber(xConfigItem.get(), nDoc, false)); pTargetView->GetWrtShell().EndAction(); //then save it SfxStringItem aName(SID_FILE_NAME, URIHelper::SmartRel2Abs( INetURLObject(), utl::TempFile::CreateTempName(), URIHelper::GetMaybeFileHdl()) ); { bool withFilterOptions = MM_DOCTYPE_TEXT == nDocType || MM_DOCTYPE_HTML == nDocType; uno::Sequence< beans::PropertyValue > aFilterValues(withFilterOptions ? 2 : 1); beans::PropertyValue* pFilterValues = aFilterValues.getArray(); pFilterValues[0].Name = "FilterName"; pFilterValues[0].Value <<= pSfxFlt->GetFilterName(); if(withFilterOptions) { pFilterValues[1].Name = "FilterOptions"; pFilterValues[1].Value <<= sFilterOptions; } uno::Reference< frame::XStorable > xTempStore( pTempView->GetDocShell()->GetModel(), uno::UNO_QUERY); xTempStore->storeToURL( aName.GetValue(), aFilterValues ); } xTempDocShell->DoClose(); sal_Int32 nTarget = xConfigItem->MoveResultSet(rInfo.nDBRow); OSL_ENSURE( nTarget == rInfo.nDBRow, "row of current document could not be selected"); OSL_ENSURE( !sEMailColumn.isEmpty(), "No email column selected"); OUString sEMail = lcl_GetColumnValueOf(sEMailColumn, xColAccess); SwMailDescriptor aDesc; aDesc.sEMail = sEMail; OUStringBuffer sBody; if(bAsBody) { { //read in the temporary file and use it as mail body SfxMedium aMedium( aName.GetValue(), StreamMode::READ); SvStream* pInStream = aMedium.GetInStream(); if(pInStream) pInStream->SetStreamCharSet( eEncoding ); else { OSL_FAIL("no output file created?"); continue; } OString sLine; bool bDone = pInStream->ReadLine( sLine ); while ( bDone ) { sBody.append( OStringToOUString(sLine, eEncoding) ); sBody.append("\n"); bDone = pInStream->ReadLine( sLine ); } } //remove the temporary file SWUnoHelper::UCB_DeleteFile( aName.GetValue() ); } else { sBody = m_sBody; aDesc.sAttachmentURL = aName.GetValue(); OUString sAttachment(m_xAttachmentED->get_text()); sal_Int32 nTokenCount = comphelper::string::getTokenCount(sAttachment, '.'); if (2 > nTokenCount) { sAttachment += "."; sAttachment = comphelper::string::setToken(sAttachment, nTokenCount, '.', sExtension); } else if (sAttachment.getToken( nTokenCount - 1, '.') != sExtension) sAttachment += sExtension; aDesc.sAttachmentName = sAttachment; aDesc.sMimeType = sMimeType; if (xConfigItem->IsGreetingLine(true)) { OUString sNameColumn = xConfigItem->GetAssignedColumn(MM_PART_LASTNAME); OUString sName = lcl_GetColumnValueOf(sNameColumn, xColAccess); OUString sGreeting; if(!sName.isEmpty() && xConfigItem->IsIndividualGreeting(true)) { OUString sGenderColumn = xConfigItem->GetAssignedColumn(MM_PART_GENDER); const OUString& sFemaleValue = xConfigItem->GetFemaleGenderValue(); OUString sGenderValue = lcl_GetColumnValueOf(sGenderColumn, xColAccess); SwMailMergeConfigItem::Gender eGenderType = sGenderValue == sFemaleValue ? SwMailMergeConfigItem::FEMALE : SwMailMergeConfigItem::MALE; sGreeting = SwAddressPreview::FillData( xConfigItem->GetGreetings(eGenderType) [xConfigItem->GetCurrentGreeting(eGenderType)], *xConfigItem); } else { sGreeting = xConfigItem->GetGreetings(SwMailMergeConfigItem::NEUTRAL) [xConfigItem->GetCurrentGreeting(SwMailMergeConfigItem::NEUTRAL)]; } sGreeting += "\n"; sBody.insert(0, sGreeting); } } aDesc.sBodyContent = sBody.makeStringAndClear(); if(MM_DOCTYPE_HTML == nDocType) { aDesc.sBodyMimeType = "text/html; charset=" + OUString::createFromAscii(rtl_getBestMimeCharsetFromTextEncoding( eEncoding )); } else aDesc.sBodyMimeType = "text/plain; charset=UTF-8; format=flowed"; aDesc.sSubject = m_xSubjectED->get_text(); aDesc.sCC = m_sCC; aDesc.sBCC = m_sBCC; xDlg->AddDocument( aDesc ); //help to force painting the dialog Application::Reschedule( true ); //stop creating of data when dialog has been closed if (!xDlg->getDialog()->get_visible()) { break; } } xDlg->EnableDestruction(); ::osl::File::remove( sTargetTempURL ); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */