/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include namespace { double snapToDiscreteUnit( double fValue, double fMinimalDiscreteUnit) { if(0.0 != fValue) { fValue = std::max(fValue, fMinimalDiscreteUnit); } return fValue; } class StyleVectorCombination { private: struct OffsetAndHalfWidthAndColor { double mfOffset; double mfHalfWidth; Color maColor; OffsetAndHalfWidthAndColor(double offset, double halfWidth, Color color) : mfOffset(offset), mfHalfWidth(halfWidth), maColor(color) {} }; double mfRefModeOffset; basegfx::B2DVector maB2DVector; double mfAngle; std::vector< OffsetAndHalfWidthAndColor > maOffsets; public: StyleVectorCombination( const svx::frame::Style& rStyle, const basegfx::B2DVector& rB2DVector, double fAngle, bool bMirrored, const Color* pForceColor, double fMinimalDiscreteUnit) : mfRefModeOffset(0.0), maB2DVector(rB2DVector), mfAngle(fAngle), maOffsets() { if (rStyle.IsUsed()) { svx::frame::RefMode aRefMode(rStyle.GetRefMode()); Color aPrim(rStyle.GetColorPrim()); Color aSecn(rStyle.GetColorSecn()); const bool bSecnUsed(0.0 != rStyle.Secn()); // Get the single segment line widths. This is the point where the // minimal discrete unit will be used if given (fMinimalDiscreteUnit). If // not given it's 0.0 and thus will have no influence. double fPrim(snapToDiscreteUnit(rStyle.Prim(), fMinimalDiscreteUnit)); const double fDist(snapToDiscreteUnit(rStyle.Dist(), fMinimalDiscreteUnit)); double fSecn(snapToDiscreteUnit(rStyle.Secn(), fMinimalDiscreteUnit)); // Of course also do not use svx::frame::Style::GetWidth() for obvious // reasons. const double fStyleWidth(fPrim + fDist + fSecn); if(bMirrored) { switch(aRefMode) { case svx::frame::RefMode::Begin: aRefMode = svx::frame::RefMode::End; break; case svx::frame::RefMode::End: aRefMode = svx::frame::RefMode::Begin; break; default: break; } if(bSecnUsed) { std::swap(aPrim, aSecn); std::swap(fPrim, fSecn); } } if (svx::frame::RefMode::Centered != aRefMode) { const double fHalfWidth(fStyleWidth * 0.5); if (svx::frame::RefMode::Begin == aRefMode) { // move aligned below vector mfRefModeOffset = fHalfWidth; } else if (svx::frame::RefMode::End == aRefMode) { // move aligned above vector mfRefModeOffset = -fHalfWidth; } } if (bSecnUsed) { // both or all three lines used const bool bPrimTransparent(0xff == rStyle.GetColorPrim().GetTransparency()); const bool bDistTransparent(!rStyle.UseGapColor() || 0xff == rStyle.GetColorGap().GetTransparency()); const bool bSecnTransparent(0xff == aSecn.GetTransparency()); if(!bPrimTransparent || !bDistTransparent || !bSecnTransparent) { const double a(mfRefModeOffset - (fStyleWidth * 0.5)); const double b(a + fPrim); const double c(b + fDist); const double d(c + fSecn); maOffsets.push_back( OffsetAndHalfWidthAndColor( (a + b) * 0.5, fPrim * 0.5, nullptr != pForceColor ? *pForceColor : aPrim)); maOffsets.push_back( OffsetAndHalfWidthAndColor( (b + c) * 0.5, fDist * 0.5, rStyle.UseGapColor() ? (nullptr != pForceColor ? *pForceColor : rStyle.GetColorGap()) : COL_TRANSPARENT)); maOffsets.push_back( OffsetAndHalfWidthAndColor( (c + d) * 0.5, fSecn * 0.5, nullptr != pForceColor ? *pForceColor : aSecn)); } } else { // one line used, push two values, from outer to inner if(0xff != rStyle.GetColorPrim().GetTransparency()) { maOffsets.push_back( OffsetAndHalfWidthAndColor( mfRefModeOffset, fPrim * 0.5, nullptr != pForceColor ? *pForceColor : aPrim)); } } } } double getRefModeOffset() const { return mfRefModeOffset; } const basegfx::B2DVector& getB2DVector() const { return maB2DVector; } double getAngle() const { return mfAngle; } bool empty() const { return maOffsets.empty(); } size_t size() const { return maOffsets.size(); } void getColorAndOffsetAndHalfWidth(size_t nIndex, Color& rColor, double& rfOffset, double& rfHalfWidth) const { if(nIndex >= maOffsets.size()) return; const OffsetAndHalfWidthAndColor& rCandidate(maOffsets[nIndex]); rfOffset = rCandidate.mfOffset; rfHalfWidth = rCandidate.mfHalfWidth; rColor = rCandidate.maColor; } }; class StyleVectorTable { private: std::vector< StyleVectorCombination > maEntries; public: StyleVectorTable() : maEntries() { } void add( const svx::frame::Style& rStyle, const basegfx::B2DVector& rMyVector, const basegfx::B2DVector& rOtherVector, bool bMirrored, double fMinimalDiscreteUnit) { if(rStyle.IsUsed() && !basegfx::areParallel(rMyVector, rOtherVector)) { // create angle between both. angle() needs vectors pointing away from the same point, // so take the mirrored one. Add F_PI to get from -pi..+pi to [0..F_PI2] for sorting const double fAngle(basegfx::B2DVector(-rMyVector.getX(), -rMyVector.getY()).angle(rOtherVector) + F_PI); maEntries.emplace_back( rStyle, rOtherVector, fAngle, bMirrored, nullptr, fMinimalDiscreteUnit); } } void sort() { // sort inverse from highest to lowest std::sort( maEntries.begin(), maEntries.end(), [](const StyleVectorCombination& a, const StyleVectorCombination& b) { return a.getAngle() > b.getAngle(); }); } bool empty() const { return maEntries.empty(); } const std::vector< StyleVectorCombination >& getEntries() const{ return maEntries; } }; struct CutSet { double mfOLML; double mfORML; double mfOLMR; double mfORMR; CutSet() : mfOLML(0.0), mfORML(0.0), mfOLMR(0.0), mfORMR(0.0) { } bool operator<( const CutSet& rOther) const { const double fA(mfOLML + mfORML + mfOLMR + mfORMR); const double fB(rOther.mfOLML + rOther.mfORML + rOther.mfOLMR + rOther.mfORMR); return fA < fB; } double getSum() const { return mfOLML + mfORML + mfOLMR + mfORMR; } }; void getCutSet( CutSet& rCutSet, const basegfx::B2DPoint& rLeft, const basegfx::B2DPoint& rRight, const basegfx::B2DVector& rX, const basegfx::B2DPoint& rOtherLeft, const basegfx::B2DPoint& rOtherRight, const basegfx::B2DVector& rOtherX) { basegfx::utils::findCut( rLeft, rX, rOtherLeft, rOtherX, CutFlagValue::LINE, &rCutSet.mfOLML); basegfx::utils::findCut( rRight, rX, rOtherLeft, rOtherX, CutFlagValue::LINE, &rCutSet.mfOLMR); basegfx::utils::findCut( rLeft, rX, rOtherRight, rOtherX, CutFlagValue::LINE, &rCutSet.mfORML); basegfx::utils::findCut( rRight, rX, rOtherRight, rOtherX, CutFlagValue::LINE, &rCutSet.mfORMR); } struct ExtendSet { double mfExtLeft; double mfExtRight; ExtendSet() : mfExtLeft(0.0), mfExtRight(0.0) {} }; void getExtends( std::vector& rExtendSet, // target Left/Right values to fill const basegfx::B2DPoint& rOrigin, // own vector start const StyleVectorCombination& rCombination, // own vector and offsets for lines const basegfx::B2DVector& rPerpendX, // normalized perpendicular to own vector const std::vector< StyleVectorCombination >& rStyleVector) // other vectors emerging in this point { if(!rCombination.empty() && !rStyleVector.empty() && rCombination.size() == rExtendSet.size()) { const size_t nOffsetA(rCombination.size()); if(1 == nOffsetA) { Color aMyColor; double fMyOffset(0.0); double fMyHalfWidth(0.0); rCombination.getColorAndOffsetAndHalfWidth(0, aMyColor, fMyOffset, fMyHalfWidth); if(0xff != aMyColor.GetTransparency()) { const basegfx::B2DPoint aLeft(rOrigin + (rPerpendX * (fMyOffset - fMyHalfWidth))); const basegfx::B2DPoint aRight(rOrigin + (rPerpendX * (fMyOffset + fMyHalfWidth))); std::vector< CutSet > aCutSets; for(const auto& rStyleCandidate : rStyleVector) { const basegfx::B2DVector aOtherPerpend(basegfx::getNormalizedPerpendicular(rStyleCandidate.getB2DVector())); const size_t nOffsetB(rStyleCandidate.size()); for(size_t other(0); other < nOffsetB; other++) { Color aOtherColor; double fOtherOffset(0.0); double fOtherHalfWidth(0.0); rStyleCandidate.getColorAndOffsetAndHalfWidth(other, aOtherColor, fOtherOffset, fOtherHalfWidth); if(0xff != aOtherColor.GetTransparency()) { const basegfx::B2DPoint aOtherLeft(rOrigin + (aOtherPerpend * (fOtherOffset - fOtherHalfWidth))); const basegfx::B2DPoint aOtherRight(rOrigin + (aOtherPerpend * (fOtherOffset + fOtherHalfWidth))); CutSet aNewCutSet; getCutSet(aNewCutSet, aLeft, aRight, rCombination.getB2DVector(), aOtherLeft, aOtherRight, rStyleCandidate.getB2DVector()); aCutSets.push_back(aNewCutSet); } } } if(!aCutSets.empty()) { CutSet aCutSet(aCutSets[0]); const size_t nNumCutSets(aCutSets.size()); if(1 != nNumCutSets) { double fCutSet(aCutSet.getSum()); for(size_t a(1); a < nNumCutSets; a++) { const CutSet& rCandidate(aCutSets[a]); const double fCandidate(rCandidate.getSum()); if(basegfx::fTools::equalZero(fCandidate - fCutSet)) { // both have equal center point, use medium cut const double fNewOLML(std::max(std::min(rCandidate.mfOLML, rCandidate.mfORML), std::min(aCutSet.mfOLML, aCutSet.mfORML))); const double fNewORML(std::min(std::max(rCandidate.mfOLML, rCandidate.mfORML), std::max(aCutSet.mfOLML, aCutSet.mfORML))); const double fNewOLMR(std::max(std::min(rCandidate.mfOLMR, rCandidate.mfORMR), std::min(aCutSet.mfOLMR, aCutSet.mfORMR))); const double fNewORMR(std::min(std::max(rCandidate.mfOLMR, rCandidate.mfORMR), std::max(aCutSet.mfOLMR, aCutSet.mfORMR))); aCutSet.mfOLML = fNewOLML; aCutSet.mfORML = fNewORML; aCutSet.mfOLMR = fNewOLMR; aCutSet.mfORMR = fNewORMR; fCutSet = aCutSet.getSum(); } else if(fCandidate < fCutSet) { // get minimum fCutSet = fCandidate; aCutSet = rCandidate; } } } ExtendSet& rExt(rExtendSet[0]); rExt.mfExtLeft = std::min(aCutSet.mfOLML, aCutSet.mfORML); rExt.mfExtRight = std::min(aCutSet.mfOLMR, aCutSet.mfORMR); } } } else { size_t nVisEdgeUp(0); size_t nVisEdgeDn(0); for(size_t my(0); my < nOffsetA; my++) { Color aMyColor; double fMyOffset(0.0); double fMyHalfWidth(0.0); rCombination.getColorAndOffsetAndHalfWidth(my, aMyColor, fMyOffset, fMyHalfWidth); if(0xff != aMyColor.GetTransparency()) { const basegfx::B2DPoint aLeft(rOrigin + (rPerpendX * (fMyOffset - fMyHalfWidth))); const basegfx::B2DPoint aRight(rOrigin + (rPerpendX * (fMyOffset + fMyHalfWidth))); const bool bUpper(my <= (nOffsetA >> 1)); const StyleVectorCombination& rStyleCandidate(bUpper ? rStyleVector.front() : rStyleVector.back()); const basegfx::B2DVector aOtherPerpend(basegfx::getNormalizedPerpendicular(rStyleCandidate.getB2DVector())); const size_t nOffsetB(rStyleCandidate.size()); std::vector< CutSet > aCutSets; for(size_t other(0); other < nOffsetB; other++) { Color aOtherColor; double fOtherOffset(0.0); double fOtherHalfWidth(0.0); rStyleCandidate.getColorAndOffsetAndHalfWidth(other, aOtherColor, fOtherOffset, fOtherHalfWidth); if(0xff != aOtherColor.GetTransparency()) { const basegfx::B2DPoint aOtherLeft(rOrigin + (aOtherPerpend * (fOtherOffset - fOtherHalfWidth))); const basegfx::B2DPoint aOtherRight(rOrigin + (aOtherPerpend * (fOtherOffset + fOtherHalfWidth))); CutSet aCutSet; getCutSet(aCutSet, aLeft, aRight, rCombination.getB2DVector(), aOtherLeft, aOtherRight, rStyleCandidate.getB2DVector()); aCutSets.push_back(aCutSet); } } if(!aCutSets.empty()) { // sort: min to start, max to end std::sort(aCutSets.begin(), aCutSets.end()); const bool bOtherUpper(rStyleCandidate.getAngle() > F_PI); // check if we need min or max // bUpper bOtherUpper MinMax // t t max // t f min // f f max // f t min const bool bMax(bUpper == bOtherUpper); size_t nBaseIndex(0); const size_t nNumCutSets(aCutSets.size()); if(bMax) { // access at end nBaseIndex = nNumCutSets - 1 - (bUpper ? nVisEdgeUp : nVisEdgeDn); } else { // access at start nBaseIndex = bUpper ? nVisEdgeUp : nVisEdgeDn; } const size_t nSecuredIndex(std::min(nNumCutSets - 1, std::max(nBaseIndex, static_cast< size_t >(0)))); const CutSet& rCutSet(aCutSets[nSecuredIndex]); ExtendSet& rExt(rExtendSet[my]); rExt.mfExtLeft = std::min(rCutSet.mfOLML, rCutSet.mfORML); rExt.mfExtRight = std::min(rCutSet.mfOLMR, rCutSet.mfORMR); } if(bUpper) { nVisEdgeUp++; } else { nVisEdgeDn++; } } } } } } /** * Helper method to create the correct drawinglayer::primitive2d::BorderLinePrimitive2D * for the given data, especially the correct drawinglayer::primitive2d::BorderLine entries * including the correctly solved/created LineStartEnd extends * * rTarget : Here the evtl. created BorderLinePrimitive2D will be appended * rOrigin : StartPoint of the Borderline * rX : Vector of the Borderline * rBorder : svx::frame::Style of the of the Borderline * rStartStyleVectorTable : All other Borderlines which have to be taken into account because * they have the same StartPoint as the current Borderline. These will be used to calculate * the correct LineStartEnd extends tor the BorderLinePrimitive2D. The definition should be * built up using svx::frame::StyleVectorTable and StyleVectorTable::add and includes: * rStyle : the svx::frame::Style of one other BorderLine * rMyVector : the Vector of the *new* to-be-defined BorderLine, identical to rX * rOtherVector: the Vector of one other BorderLine (may be, but does not need to be normalized), * always *pointing away* from the common StartPoint rOrigin * bMirrored : define if rStyle of one other BorderLine shall be mirrored (e.g. bottom-right edges) * With multiple BorderLines the definitions have to be CounterClockWise. This will be * ensured by StyleVectorTable sorting the entries, but knowing this may allow more efficient * data creation. * rEndStyleVectorTable: All other BorderLines that have the same EndPoint. There are differences to * the Start definitions: * - do not forget to consequently use -rX for rMyVector * - definitions have to be ClockWise for the EndBorderLines, will be ensured by sorting * * If you take all this into account, you will gett correctly extended BorderLinePrimitive2D * representations for the new to be defined BorderLine. That extensions will overlap nicely * with the corresponding BorderLines and take all multiple line definitions in the ::Style into * account. * The internal solver is *not limited* to ::Style(s) with three parts (Left/Gap/Right), this is * just due to svx::frame::Style's definitions. A new solver based on this one can be created * anytime using more mulötiple borders based on the more flexible * std::vector< drawinglayer::primitive2d::BorderLine > if needed. */ void CreateBorderPrimitives( drawinglayer::primitive2d::Primitive2DContainer& rTarget, /// target for created primitives const basegfx::B2DPoint& rOrigin, /// start point of borderline const basegfx::B2DVector& rX, /// X-Axis of borderline with length const svx::frame::Style& rBorder, /// Style of borderline const StyleVectorTable& rStartStyleVectorTable, /// Styles and vectors (pointing away) at borderline start, ccw const StyleVectorTable& rEndStyleVectorTable, /// Styles and vectors (pointing away) at borderline end, cw const Color* pForceColor, /// If specified, overrides frame border color. double fMinimalDiscreteUnit) /// minimal discrete unit to use for svx::frame::Style width values { // get offset color pairs for style, one per visible line const StyleVectorCombination aCombination( rBorder, rX, 0.0, false, pForceColor, fMinimalDiscreteUnit); if(aCombination.empty()) return; const basegfx::B2DVector aPerpendX(basegfx::getNormalizedPerpendicular(rX)); const bool bHasStartStyles(!rStartStyleVectorTable.empty()); const bool bHasEndStyles(!rEndStyleVectorTable.empty()); const size_t nOffsets(aCombination.size()); std::vector aExtendSetStart(nOffsets); std::vector aExtendSetEnd(nOffsets); if(bHasStartStyles) { // create extends for line starts, use given point/vector and offsets getExtends(aExtendSetStart, rOrigin, aCombination, aPerpendX, rStartStyleVectorTable.getEntries()); } if(bHasEndStyles) { // Create extends for line ends, create inverse point/vector and inverse offsets. const StyleVectorCombination aMirroredCombination( rBorder, -rX, 0.0, true, pForceColor, fMinimalDiscreteUnit); getExtends(aExtendSetEnd, rOrigin + rX, aMirroredCombination, -aPerpendX, rEndStyleVectorTable.getEntries()); // also need to inverse the result to apply to the correct lines std::reverse(aExtendSetEnd.begin(), aExtendSetEnd.end()); } std::vector< drawinglayer::primitive2d::BorderLine > aBorderlines; const double fNegLength(-rX.getLength()); for(size_t a(0); a < nOffsets; a++) { Color aMyColor; double fMyOffset(0.0); double fMyHalfWidth(0.0); aCombination.getColorAndOffsetAndHalfWidth(a, aMyColor, fMyOffset, fMyHalfWidth); const ExtendSet& rExtStart(aExtendSetStart[a]); const ExtendSet& rExtEnd(aExtendSetEnd[a]); if(0xff == aMyColor.GetTransparency()) { aBorderlines.push_back( drawinglayer::primitive2d::BorderLine( fMyHalfWidth * 2.0)); } else { aBorderlines.push_back( drawinglayer::primitive2d::BorderLine( drawinglayer::attribute::LineAttribute( aMyColor.getBColor(), fMyHalfWidth * 2.0), fNegLength * rExtStart.mfExtLeft, fNegLength * rExtStart.mfExtRight, fNegLength * rExtEnd.mfExtRight, fNegLength * rExtEnd.mfExtLeft)); } } static const double fPatScFact(10.0); // 10.0 multiply, see old code const std::vector aDashing(svtools::GetLineDashing(rBorder.Type(), rBorder.PatternScale() * fPatScFact)); const drawinglayer::attribute::StrokeAttribute aStrokeAttribute(aDashing); const basegfx::B2DPoint aStart(rOrigin + (aPerpendX * aCombination.getRefModeOffset())); rTarget.append( drawinglayer::primitive2d::Primitive2DReference( new drawinglayer::primitive2d::BorderLinePrimitive2D( aStart, aStart + rX, aBorderlines, aStrokeAttribute))); } double getMinimalNonZeroValue(double fCurrent, double fNew) { if(0.0 != fNew) { if(0.0 != fCurrent) { fCurrent = std::min(fNew, fCurrent); } else { fCurrent = fNew; } } return fCurrent; } double getMinimalNonZeroBorderWidthFromStyle(double fCurrent, const svx::frame::Style& rStyle) { if(rStyle.IsUsed()) { fCurrent = getMinimalNonZeroValue(fCurrent, rStyle.Prim()); fCurrent = getMinimalNonZeroValue(fCurrent, rStyle.Dist()); fCurrent = getMinimalNonZeroValue(fCurrent, rStyle.Secn()); } return fCurrent; } } namespace drawinglayer::primitive2d { SdrFrameBorderData::SdrConnectStyleData::SdrConnectStyleData( const svx::frame::Style& rStyle, const basegfx::B2DVector& rNormalizedPerpendicular, bool bStyleMirrored) : maStyle(rStyle), maNormalizedPerpendicular(rNormalizedPerpendicular), mbStyleMirrored(bStyleMirrored) { } SdrFrameBorderData::SdrFrameBorderData( const basegfx::B2DPoint& rOrigin, const basegfx::B2DVector& rX, const svx::frame::Style& rStyle, const Color* pForceColor) : maOrigin(rOrigin), maX(rX), maStyle(rStyle), maColor(nullptr != pForceColor ? *pForceColor : Color()), mbForceColor(nullptr != pForceColor), maStart(), maEnd() { } void SdrFrameBorderData::addSdrConnectStyleData( bool bStart, const svx::frame::Style& rStyle, const basegfx::B2DVector& rNormalizedPerpendicular, bool bStyleMirrored) { if(rStyle.IsUsed()) { if(bStart) { maStart.emplace_back(rStyle, rNormalizedPerpendicular, bStyleMirrored); } else { maEnd.emplace_back(rStyle, rNormalizedPerpendicular, bStyleMirrored); } } } void SdrFrameBorderData::create2DDecomposition( Primitive2DContainer& rContainer, double fMinimalDiscreteUnit) const { StyleVectorTable aStartVector; StyleVectorTable aEndVector; const basegfx::B2DVector aAxis(-maX); for(const auto& rStart : maStart) { aStartVector.add( rStart.getStyle(), maX, rStart.getNormalizedPerpendicular(), rStart.getStyleMirrored(), fMinimalDiscreteUnit); } for(const auto& rEnd : maEnd) { aEndVector.add( rEnd.getStyle(), aAxis, rEnd.getNormalizedPerpendicular(), rEnd.getStyleMirrored(), fMinimalDiscreteUnit); } aStartVector.sort(); aEndVector.sort(); CreateBorderPrimitives( rContainer, maOrigin, maX, maStyle, aStartVector, aEndVector, mbForceColor ? &maColor : nullptr, fMinimalDiscreteUnit); } double SdrFrameBorderData::getMinimalNonZeroBorderWidth() const { double fRetval(getMinimalNonZeroBorderWidthFromStyle(0.0, maStyle)); for(const auto& rStart : maStart) { fRetval = getMinimalNonZeroBorderWidthFromStyle(fRetval, rStart.getStyle()); } for(const auto& rEnd : maEnd) { fRetval = getMinimalNonZeroBorderWidthFromStyle(fRetval, rEnd.getStyle()); } return fRetval; } void SdrFrameBorderPrimitive2D::create2DDecomposition( Primitive2DContainer& rContainer, const geometry::ViewInformation2D& /*aViewInformation*/) const { if(!getFrameBorders()) { return; } Primitive2DContainer aRetval; // Check and use the minimal non-zero BorderWidth for decompose // if that is set and wanted const double fMinimalDiscreteUnit(doForceToSingleDiscreteUnit() ? mfMinimalNonZeroBorderWidthUsedForDecompose : 0.0); if(doMergeResult()) { // decompose all buffered SdrFrameBorderData entries and try to merge them // to reduce existing number of BorderLinePrimitive2D(s) for(const auto& rCandidate : *getFrameBorders()) { // get decomposition on one SdrFrameBorderData entry Primitive2DContainer aPartial; rCandidate.create2DDecomposition( aPartial, fMinimalDiscreteUnit); for(const auto& aCandidatePartial : aPartial) { if(aRetval.empty()) { // no local data yet, just add as 1st entry, done aRetval.append(aCandidatePartial); } else { bool bDidMerge(false); for(auto& aCandidateRetval : aRetval) { // try to merge by appending new data to existing data const drawinglayer::primitive2d::Primitive2DReference aMergeRetvalPartial( drawinglayer::primitive2d::tryMergeBorderLinePrimitive2D( aCandidateRetval, aCandidatePartial)); if(aMergeRetvalPartial.is()) { // could append, replace existing data with merged data, done aCandidateRetval = aMergeRetvalPartial; bDidMerge = true; break; } // try to merge by appending existing data to new data const drawinglayer::primitive2d::Primitive2DReference aMergePartialRetval( drawinglayer::primitive2d::tryMergeBorderLinePrimitive2D( aCandidatePartial, aCandidateRetval)); if(aMergePartialRetval.is()) { // could append, replace existing data with merged data, done aCandidateRetval = aMergePartialRetval; bDidMerge = true; break; } } if(!bDidMerge) { // no merge after checking all existing data, append as new segment aRetval.append(aCandidatePartial); } } } } } else { // just decompose all buffered SdrFrameBorderData entries, do not try to merge for(const auto& rCandidate : *getFrameBorders()) { rCandidate.create2DDecomposition( aRetval, fMinimalDiscreteUnit); } } rContainer.insert(rContainer.end(), aRetval.begin(), aRetval.end()); } SdrFrameBorderPrimitive2D::SdrFrameBorderPrimitive2D( std::shared_ptr& rFrameBorders, bool bMergeResult, bool bForceToSingleDiscreteUnit) : BufferedDecompositionPrimitive2D(), maFrameBorders(std::move(rFrameBorders)), mfMinimalNonZeroBorderWidth(0.0), mfMinimalNonZeroBorderWidthUsedForDecompose(0.0), mbMergeResult(bMergeResult), mbForceToSingleDiscreteUnit(bForceToSingleDiscreteUnit) { if(getFrameBorders() && doForceToSingleDiscreteUnit()) { // detect used minimal non-zero partial border width for(const auto& rCandidate : *getFrameBorders()) { mfMinimalNonZeroBorderWidth = getMinimalNonZeroValue( mfMinimalNonZeroBorderWidth, rCandidate.getMinimalNonZeroBorderWidth()); } } } bool SdrFrameBorderPrimitive2D::operator==(const BasePrimitive2D& rPrimitive) const { if(BufferedDecompositionPrimitive2D::operator==(rPrimitive)) { const SdrFrameBorderPrimitive2D& rCompare = static_cast(rPrimitive); return getFrameBorders() == rCompare.getFrameBorders() && doMergeResult() == rCompare.doMergeResult() && doForceToSingleDiscreteUnit() == rCompare.doForceToSingleDiscreteUnit(); } return false; } void SdrFrameBorderPrimitive2D::get2DDecomposition( Primitive2DDecompositionVisitor& rVisitor, const geometry::ViewInformation2D& rViewInformation) const { if(doForceToSingleDiscreteUnit()) { // Get the current DiscreteUnit, look at X and Y and use the maximum const basegfx::B2DVector aDiscreteVector(rViewInformation.getInverseObjectToViewTransformation() * basegfx::B2DVector(1.0, 1.0)); double fDiscreteUnit(std::min(fabs(aDiscreteVector.getX()), fabs(aDiscreteVector.getY()))); if(fDiscreteUnit <= mfMinimalNonZeroBorderWidth) { // no need to use it, reset fDiscreteUnit = 0.0; } if(fDiscreteUnit != mfMinimalNonZeroBorderWidthUsedForDecompose) { // conditions of last local decomposition have changed, delete // possible content if(!getBuffered2DDecomposition().empty()) { const_cast< SdrFrameBorderPrimitive2D* >(this)->setBuffered2DDecomposition(Primitive2DContainer()); } // remember new conditions const_cast< SdrFrameBorderPrimitive2D* >(this)->mfMinimalNonZeroBorderWidthUsedForDecompose = fDiscreteUnit; } } // call parent. This will call back ::create2DDecomposition above // where mfMinimalNonZeroBorderWidthUsedForDecompose will be used // when doForceToSingleDiscreteUnit() is true BufferedDecompositionPrimitive2D::get2DDecomposition(rVisitor, rViewInformation); } // provide unique ID ImplPrimitive2DIDBlock(SdrFrameBorderPrimitive2D, PRIMITIVE2D_ID_SDRFRAMEBORDERTPRIMITIVE2D) } // end of namespace /* vim:set shiftwidth=4 softtabstop=4 expandtab: */