/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "objshimp.hxx" #include "sfxtypes.hxx" #include #include #include "versdlg.hxx" #include "doc.hrc" #include #include #include #include #include #include #include "../appl/app.hrc" #include #include #include #include #include "helpid.hrc" #include "guisaveas.hxx" #include #include using namespace ::com::sun::star; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::uno; using namespace ::com::sun::star::ui::dialogs; using namespace ::com::sun::star::awt; using namespace ::com::sun::star::container; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::document; using namespace ::com::sun::star::task; #define SfxObjectShell #include "sfxslots.hxx" SFX_IMPL_SUPERCLASS_INTERFACE(SfxObjectShell, SfxShell) void SfxObjectShell::InitInterface_Impl() { } class SfxClosePreventer_Impl : public ::cppu::WeakImplHelper1< ::com::sun::star::util::XCloseListener > { bool m_bGotOwnership; bool m_bPreventClose; public: SfxClosePreventer_Impl(); bool HasOwnership() { return m_bGotOwnership; } void SetPreventClose( bool bPrevent ) { m_bPreventClose = bPrevent; } virtual void SAL_CALL queryClosing( const lang::EventObject& aEvent, sal_Bool bDeliverOwnership ) throw ( uno::RuntimeException, util::CloseVetoException, std::exception ) SAL_OVERRIDE; virtual void SAL_CALL notifyClosing( const lang::EventObject& aEvent ) throw ( uno::RuntimeException, std::exception ) SAL_OVERRIDE ; virtual void SAL_CALL disposing( const lang::EventObject& aEvent ) throw ( uno::RuntimeException, std::exception ) SAL_OVERRIDE ; } ; SfxClosePreventer_Impl::SfxClosePreventer_Impl() : m_bGotOwnership( false ) , m_bPreventClose( true ) { } void SAL_CALL SfxClosePreventer_Impl::queryClosing( const lang::EventObject&, sal_Bool bDeliverOwnership ) throw ( uno::RuntimeException, util::CloseVetoException, std::exception ) { if ( m_bPreventClose ) { if ( !m_bGotOwnership ) m_bGotOwnership = bDeliverOwnership; throw util::CloseVetoException(); } } void SAL_CALL SfxClosePreventer_Impl::notifyClosing( const lang::EventObject& ) throw ( uno::RuntimeException, std::exception ) {} void SAL_CALL SfxClosePreventer_Impl::disposing( const lang::EventObject& ) throw ( uno::RuntimeException, std::exception ) {} class SfxInstanceCloseGuard_Impl { SfxClosePreventer_Impl* m_pPreventer; uno::Reference< util::XCloseListener > m_xPreventer; uno::Reference< util::XCloseable > m_xCloseable; public: SfxInstanceCloseGuard_Impl() : m_pPreventer( NULL ) {} ~SfxInstanceCloseGuard_Impl(); bool Init_Impl( const uno::Reference< util::XCloseable >& xCloseable ); }; bool SfxInstanceCloseGuard_Impl::Init_Impl( const uno::Reference< util::XCloseable >& xCloseable ) { bool bResult = false; // do not allow reinit after the successful init if ( xCloseable.is() && !m_xCloseable.is() ) { try { m_pPreventer = new SfxClosePreventer_Impl(); m_xPreventer = uno::Reference< util::XCloseListener >( m_pPreventer ); xCloseable->addCloseListener( m_xPreventer ); m_xCloseable = xCloseable; bResult = true; } catch( uno::Exception& ) { OSL_FAIL( "Could not register close listener!\n" ); } } return bResult; } SfxInstanceCloseGuard_Impl::~SfxInstanceCloseGuard_Impl() { if ( m_xCloseable.is() && m_xPreventer.is() ) { try { m_xCloseable->removeCloseListener( m_xPreventer ); } catch( uno::Exception& ) { } try { if ( m_pPreventer ) { m_pPreventer->SetPreventClose( false ); if ( m_pPreventer->HasOwnership() ) m_xCloseable->close( sal_True ); // TODO: do it asynchronously } } catch( uno::Exception& ) { } } } void SfxObjectShell::PrintExec_Impl(SfxRequest &rReq) { SfxViewFrame *pFrame = SfxViewFrame::GetFirst(this); if ( pFrame ) { rReq.SetSlot( SID_PRINTDOC ); pFrame->GetViewShell()->ExecuteSlot(rReq); } } void SfxObjectShell::PrintState_Impl(SfxItemSet &rSet) { bool bPrinting = false; SfxViewFrame* pFrame = SfxViewFrame::GetFirst( this ); if ( pFrame ) { SfxPrinter *pPrinter = pFrame->GetViewShell()->GetPrinter(); bPrinting = pPrinter && pPrinter->IsPrinting(); } rSet.Put( SfxBoolItem( SID_PRINTOUT, bPrinting ) ); } bool SfxObjectShell::APISaveAs_Impl ( const OUString& aFileName, SfxItemSet* aParams ) { bool bOk = false; if ( GetMedium() ) { OUString aFilterName; SFX_ITEMSET_ARG( aParams, pFilterNameItem, SfxStringItem, SID_FILTER_NAME, false ); if( pFilterNameItem ) { aFilterName = pFilterNameItem->GetValue(); } else { SFX_ITEMSET_ARG( aParams, pContentTypeItem, SfxStringItem, SID_CONTENTTYPE, false ); if ( pContentTypeItem ) { const SfxFilter* pFilter = SfxFilterMatcher( OUString::createFromAscii(GetFactory().GetShortName()) ).GetFilter4Mime( pContentTypeItem->GetValue(), SfxFilterFlags::EXPORT ); if ( pFilter ) aFilterName = pFilter->GetName(); } } // in case no filter defined use default one if( aFilterName.isEmpty() ) { const SfxFilter* pFilt = SfxFilter::GetDefaultFilterFromFactory(GetFactory().GetFactoryName()); DBG_ASSERT( pFilt, "No default filter!\n" ); if( pFilt ) aFilterName = pFilt->GetFilterName(); aParams->Put(SfxStringItem( SID_FILTER_NAME, aFilterName)); } { SfxObjectShellRef xLock( this ); // ??? // use the title that is provided in the media descriptor SFX_ITEMSET_ARG( aParams, pDocTitleItem, SfxStringItem, SID_DOCINFO_TITLE, false ); if ( pDocTitleItem ) getDocProperties()->setTitle( pDocTitleItem->GetValue() ); bOk = CommonSaveAs_Impl( INetURLObject(aFileName), aFilterName, aParams ); } } return bOk; } void SfxObjectShell::CheckOut( ) { try { uno::Reference< document::XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY_THROW ); xCmisDoc->checkOut( ); // Remove the info bar SfxViewFrame* pViewFrame = GetFrame(); pViewFrame->RemoveInfoBar( "checkout" ); } catch ( const uno::RuntimeException& e ) { ScopedVclPtrInstance< MessageDialog > pErrorBox( &GetFrame()->GetWindow(), e.Message ); pErrorBox->Execute( ); } } void SfxObjectShell::CancelCheckOut( ) { try { uno::Reference< document::XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY_THROW ); xCmisDoc->cancelCheckOut( ); uno::Reference< util::XModifiable > xModifiable( GetModel( ), uno::UNO_QUERY ); if ( xModifiable.is( ) ) xModifiable->setModified( sal_False ); } catch ( const uno::RuntimeException& e ) { ScopedVclPtrInstance< MessageDialog > pErrorBox(&GetFrame()->GetWindow(), e.Message); pErrorBox->Execute( ); } } void SfxObjectShell::CheckIn( ) { try { uno::Reference< document::XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY_THROW ); // Pop up dialog to ask for comment and major ScopedVclPtrInstance< SfxCheckinDialog > checkinDlg(&GetFrame( )->GetWindow( )); if ( checkinDlg->Execute( ) == RET_OK ) { OUString sComment = checkinDlg->GetComment( ); bool bMajor = checkinDlg->IsMajor( ); xCmisDoc->checkIn( bMajor, sComment ); uno::Reference< util::XModifiable > xModifiable( GetModel( ), uno::UNO_QUERY ); if ( xModifiable.is( ) ) xModifiable->setModified( sal_False ); } } catch ( const uno::RuntimeException& e ) { ScopedVclPtrInstance< MessageDialog > pErrorBox(&GetFrame()->GetWindow(), e.Message); pErrorBox->Execute( ); } } uno::Sequence< document::CmisVersion > SfxObjectShell::GetCmisVersions( ) { try { uno::Reference< document::XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY_THROW ); return xCmisDoc->getAllVersions( ); } catch ( const uno::RuntimeException& e ) { ScopedVclPtrInstance< MessageDialog > pErrorBox(&GetFrame()->GetWindow(), e.Message); pErrorBox->Execute( ); } return uno::Sequence< document::CmisVersion > ( ); } void SfxObjectShell::ExecFile_Impl(SfxRequest &rReq) { sal_uInt16 nId = rReq.GetSlot(); if( SID_SIGNATURE == nId || SID_MACRO_SIGNATURE == nId ) { if ( QueryHiddenInformation( HiddenWarningFact::WhenSigning, NULL ) == RET_YES ) ( SID_SIGNATURE == nId ) ? SignDocumentContent() : SignScriptingContent(); return; } if ( !GetMedium() && nId != SID_CLOSEDOC ) { rReq.Ignore(); return; } // this guard is created here to have it destruction at the end of the method SfxInstanceCloseGuard_Impl aModelGuard; bool bIsPDFExport = false; switch(nId) { case SID_VERSION: { SfxViewFrame* pFrame = GetFrame(); if ( !pFrame ) pFrame = SfxViewFrame::GetFirst( this ); if ( !pFrame ) return; if ( pFrame->GetFrame().GetParentFrame() ) { pFrame->GetTopViewFrame()->GetObjectShell()->ExecuteSlot( rReq ); return; } if ( !IsOwnStorageFormat_Impl( *GetMedium() ) ) return; ScopedVclPtrInstance< SfxVersionDialog > pDlg( pFrame, IsSaveVersionOnClose() ); pDlg->Execute(); SetSaveVersionOnClose( pDlg->IsSaveVersionOnClose() ); rReq.Done(); return; } // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - case SID_DOCINFO: { SFX_REQUEST_ARG(rReq, pDocInfItem, SfxDocumentInfoItem, SID_DOCINFO, false); if ( pDocInfItem ) { // parameter, e.g. from replayed macro pDocInfItem->UpdateDocumentInfo(getDocProperties(), true); SetUseUserData( pDocInfItem->IsUseUserData() ); } else { // no argument containing DocInfo; check optional arguments bool bReadOnly = IsReadOnly(); SFX_REQUEST_ARG(rReq, pROItem, SfxBoolItem, SID_DOC_READONLY, false); if ( pROItem ) // override readonly attribute of document // e.g. if a readonly document is saved elsewhere and user asks for editing DocInfo before bReadOnly = pROItem->GetValue(); // collect data for dialog OUString aURL, aTitle; if ( HasName() ) { aURL = GetMedium()->GetName(); aTitle = GetTitle(); } else { aURL = "private:factory/" + OUString::createFromAscii( GetFactory().GetShortName() ); aTitle = GetTitle(); } Reference< XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY ); uno::Sequence< document::CmisProperty> aCmisProperties = xCmisDoc->getCmisProperties(); SfxDocumentInfoItem aDocInfoItem( aURL, getDocProperties(), aCmisProperties, IsUseUserData() ); if ( !GetSlotState( SID_DOCTEMPLATE ) ) // templates not supported aDocInfoItem.SetTemplate(false); SfxItemSet aSet(GetPool(), SID_DOCINFO, SID_DOCINFO, SID_DOC_READONLY, SID_DOC_READONLY, SID_EXPLORER_PROPS_START, SID_EXPLORER_PROPS_START, SID_BASEURL, SID_BASEURL, 0L ); aSet.Put( aDocInfoItem ); aSet.Put( SfxBoolItem( SID_DOC_READONLY, bReadOnly ) ); aSet.Put( SfxStringItem( SID_EXPLORER_PROPS_START, aTitle ) ); aSet.Put( SfxStringItem( SID_BASEURL, GetMedium()->GetBaseURL() ) ); // creating dialog is done via virtual method; application will // add its own statistics page ScopedVclPtr pDlg(CreateDocumentInfoDialog(0, aSet)); if ( RET_OK == pDlg->Execute() ) { SFX_ITEMSET_ARG( pDlg->GetOutputItemSet(), pDocInfoItem, SfxDocumentInfoItem, SID_DOCINFO, false); if ( pDocInfoItem ) { // user has done some changes to DocumentInfo pDocInfoItem->UpdateDocumentInfo(getDocProperties()); uno::Sequence< document::CmisProperty > aNewCmisProperties = pDocInfoItem->GetCmisProperties( ); if ( aNewCmisProperties.getLength( ) > 0 ) xCmisDoc->updateCmisProperties( aNewCmisProperties ); SetUseUserData( ((const SfxDocumentInfoItem *)pDocInfoItem)->IsUseUserData() ); // add data from dialog for possible recording purpose rReq.AppendItem( SfxDocumentInfoItem( GetTitle(), getDocProperties(), aNewCmisProperties, IsUseUserData() ) ); } rReq.Done(); } else // nothing done; no recording rReq.Ignore(); } return; } // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - case SID_EXPORTDOCASPDF: case SID_DIRECTEXPORTDOCASPDF: bIsPDFExport = true; //fall-through case SID_EXPORTDOC: case SID_SAVEASDOC: case SID_SAVEDOC: { // derived class may decide to abort this if( !QuerySlotExecutable( nId ) ) { rReq.SetReturnValue( SfxBoolItem( 0, false ) ); return; } //!! detailed analysis of an error code SfxObjectShellRef xLock( this ); // the model can not be closed till the end of this method // if somebody tries to close it during this time the model will be closed // at the end of the method aModelGuard.Init_Impl( uno::Reference< util::XCloseable >( GetModel(), uno::UNO_QUERY ) ); sal_uInt32 nErrorCode = ERRCODE_NONE; // by default versions should be preserved always except in case of an explicit // SaveAs via GUI, so the flag must be set accordingly pImp->bPreserveVersions = (nId == SID_SAVEDOC); try { SfxErrorContext aEc( ERRCTX_SFX_SAVEASDOC, GetTitle() ); // ??? if ( nId == SID_SAVEASDOC ) { // in case of plugin mode the SaveAs operation means SaveTo SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pViewOnlyItem, SfxBoolItem, SID_VIEWONLY, false ); if ( pViewOnlyItem && pViewOnlyItem->GetValue() ) rReq.AppendItem( SfxBoolItem( SID_SAVETO, true ) ); } // TODO/LATER: do the following GUI related actions in standalown method // Introduce a status indicator for GUI operation SFX_REQUEST_ARG( rReq, pStatusIndicatorItem, SfxUnoAnyItem, SID_PROGRESS_STATUSBAR_CONTROL, false ); if ( !pStatusIndicatorItem ) { // get statusindicator uno::Reference< task::XStatusIndicator > xStatusIndicator; uno::Reference < frame::XController > xCtrl( GetModel()->getCurrentController() ); if ( xCtrl.is() ) { uno::Reference< task::XStatusIndicatorFactory > xStatFactory( xCtrl->getFrame(), uno::UNO_QUERY ); if( xStatFactory.is() ) xStatusIndicator = xStatFactory->createStatusIndicator(); } OSL_ENSURE( xStatusIndicator.is(), "Can not retrieve default status indicator!\n" ); if ( xStatusIndicator.is() ) { SfxUnoAnyItem aStatIndItem( SID_PROGRESS_STATUSBAR_CONTROL, uno::makeAny( xStatusIndicator ) ); if ( nId == SID_SAVEDOC ) { // in case of saving it is not possible to transport the parameters from here // but it is not clear here whether the saving will be done or saveAs operation GetMedium()->GetItemSet()->Put( aStatIndItem ); } rReq.AppendItem( aStatIndItem ); } } else if ( nId == SID_SAVEDOC ) { // in case of saving it is not possible to transport the parameters from here // but it is not clear here whether the saving will be done or saveAs operation GetMedium()->GetItemSet()->Put( *pStatusIndicatorItem ); } // Introduce an interaction handler for GUI operation SFX_REQUEST_ARG( rReq, pInteractionHandlerItem, SfxUnoAnyItem, SID_INTERACTIONHANDLER, false ); if ( !pInteractionHandlerItem ) { uno::Reference< uno::XComponentContext > xContext = ::comphelper::getProcessComponentContext(); uno::Reference< task::XInteractionHandler2 > xInteract( task::InteractionHandler::createWithParent(xContext, 0) ); SfxUnoAnyItem aInteractionItem( SID_INTERACTIONHANDLER, uno::makeAny( xInteract ) ); if ( nId == SID_SAVEDOC ) { // in case of saving it is not possible to transport the parameters from here // but it is not clear here whether the saving will be done or saveAs operation GetMedium()->GetItemSet()->Put( aInteractionItem ); } rReq.AppendItem( aInteractionItem ); } else if ( nId == SID_SAVEDOC ) { // in case of saving it is not possible to transport the parameters from here // but it is not clear here whether the saving will be done or saveAs operation GetMedium()->GetItemSet()->Put( *pInteractionHandlerItem ); } bool bPreselectPassword = false; SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pOldEncryptionDataItem, SfxUnoAnyItem, SID_ENCRYPTIONDATA, false ); SFX_ITEMSET_ARG( GetMedium()->GetItemSet(), pOldPasswordItem, SfxStringItem, SID_PASSWORD, false ); if ( pOldEncryptionDataItem || pOldPasswordItem ) bPreselectPassword = true; uno::Sequence< beans::PropertyValue > aDispatchArgs; if ( rReq.GetArgs() ) TransformItems( nId, *rReq.GetArgs(), aDispatchArgs, NULL ); const SfxSlot* pSlot = GetModule()->GetSlotPool()->GetSlot( nId ); if ( !pSlot ) throw uno::Exception(); SfxStoringHelper aHelper; if ( QueryHiddenInformation( bIsPDFExport ? HiddenWarningFact::WhenCreatingPDF : HiddenWarningFact::WhenSaving, NULL ) == RET_YES ) { aHelper.GUIStoreModel( GetModel(), OUString::createFromAscii( pSlot->GetUnoName() ), aDispatchArgs, bPreselectPassword, GetSharedFileURL(), GetDocumentSignatureState() ); } else { // the user has decided not to store the document throw task::ErrorCodeIOException( "SfxObjectShell::ExecFile_Impl: ERRCODE_IO_ABORT", uno::Reference< uno::XInterface >(), ERRCODE_IO_ABORT); } // merge aDispatchArgs to the request SfxAllItemSet aResultParams( GetPool() ); TransformParameters( nId, aDispatchArgs, aResultParams, NULL ); rReq.SetArgs( aResultParams ); // the StoreAsURL/StoreToURL method have called this method with false // so it has to be restored to true here since it is a call from GUI GetMedium()->SetUpdatePickList( true ); // TODO: in future it must be done in followind way // if document is opened from GUI it is immediatelly appears in the picklist // if the document is a new one then it appears in the picklist immediatelly // after SaveAs operation triggered from GUI } catch( const task::ErrorCodeIOException& aErrorEx ) { nErrorCode = (sal_uInt32)aErrorEx.ErrCode; } catch( Exception& ) { nErrorCode = ERRCODE_IO_GENERAL; } // by default versions should be preserved always except in case of an explicit // SaveAs via GUI, so the flag must be reset to guarantee this pImp->bPreserveVersions = true; sal_uIntPtr lErr=GetErrorCode(); if ( !lErr && nErrorCode ) lErr = nErrorCode; if ( lErr && nErrorCode == ERRCODE_NONE ) { SFX_REQUEST_ARG( rReq, pWarnItem, SfxBoolItem, SID_FAIL_ON_WARNING, false ); if ( pWarnItem && pWarnItem->GetValue() ) nErrorCode = lErr; } // may be nErrorCode should be shown in future if ( lErr != ERRCODE_IO_ABORT ) { SfxErrorContext aEc(ERRCTX_SFX_SAVEASDOC,GetTitle()); ErrorHandler::HandleError( lErr ); } if ( nId == SID_EXPORTDOCASPDF ) { // This function is used by the SendMail function that needs information if a export // file was written or not. This could be due to cancellation of the export // or due to an error. So IO abort must be handled like an error! nErrorCode = ( lErr != ERRCODE_IO_ABORT ) && ( nErrorCode == ERRCODE_NONE ) ? nErrorCode : lErr; } if ( nId == SID_SAVEASDOC && nErrorCode == ERRCODE_NONE ) { SfxBoolItem const * saveTo = static_cast( rReq.GetArg(SID_SAVETO, false, TYPE(SfxBoolItem))); if (saveTo == nullptr || !saveTo->GetValue()) { GetFrame()->RemoveInfoBar("readonly"); SetReadOnlyUI(false); } } rReq.SetReturnValue( SfxBoolItem(0, nErrorCode == ERRCODE_NONE ) ); ResetError(); Invalidate(); break; } case SID_SAVEACOPY: { SfxAllItemSet aArgs( GetPool() ); aArgs.Put( SfxBoolItem( SID_SAVEACOPYITEM, true ) ); SfxRequest aSaveACopyReq( SID_EXPORTDOC, SfxCallMode::API, aArgs ); ExecFile_Impl( aSaveACopyReq ); if ( !aSaveACopyReq.IsDone() ) { rReq.Ignore(); return; } break; } // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - case SID_CLOSEDOC: { SfxViewFrame *pFrame = GetFrame(); if ( pFrame && pFrame->GetFrame().GetParentFrame() ) { // If SID_CLOSEDOC is executed through menu and so on, but // the current document is in a frame, then the // FrameSetDocument should actually be closed. pFrame->GetTopViewFrame()->GetObjectShell()->ExecuteSlot( rReq ); rReq.Done(); return; } bool bInFrameSet = false; sal_uInt16 nFrames=0; pFrame = SfxViewFrame::GetFirst( this ); while ( pFrame ) { if ( pFrame->GetFrame().GetParentFrame() ) { // In this document there still exists a view that is // in a FrameSet , which of course may not be closed // geclosed werden bInFrameSet = true; } else nFrames++; pFrame = SfxViewFrame::GetNext( *pFrame, this ); } if ( bInFrameSet ) { // Close all views that are not in a FrameSet. pFrame = SfxViewFrame::GetFirst( this ); while ( pFrame ) { if ( !pFrame->GetFrame().GetParentFrame() ) pFrame->GetFrame().DoClose(); pFrame = SfxViewFrame::GetNext( *pFrame, this ); } } // Evaluate Parameter SFX_REQUEST_ARG(rReq, pSaveItem, SfxBoolItem, SID_CLOSEDOC_SAVE, false); SFX_REQUEST_ARG(rReq, pNameItem, SfxStringItem, SID_CLOSEDOC_FILENAME, false); if ( pSaveItem ) { if ( pSaveItem->GetValue() ) { if ( !pNameItem ) { #if HAVE_FEATURE_SCRIPTING SbxBase::SetError( SbxERR_WRONG_ARGS ); #endif rReq.Ignore(); return; } SfxAllItemSet aArgs( GetPool() ); SfxStringItem aTmpItem( SID_FILE_NAME, pNameItem->GetValue() ); aArgs.Put( aTmpItem, aTmpItem.Which() ); SfxRequest aSaveAsReq( SID_SAVEASDOC, SfxCallMode::API, aArgs ); ExecFile_Impl( aSaveAsReq ); if ( !aSaveAsReq.IsDone() ) { rReq.Ignore(); return; } } else SetModified(false); } // Cancelled by the user? if (!PrepareClose(true)) { rReq.SetReturnValue( SfxBoolItem(0, false) ); rReq.Done(); return; } SetModified( false ); sal_uIntPtr lErr = GetErrorCode(); ErrorHandler::HandleError(lErr); rReq.SetReturnValue( SfxBoolItem(0, true) ); rReq.Done(); rReq.ReleaseArgs(); // because the pool is destroyed in Close DoClose(); return; } // - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - case SID_DOCTEMPLATE: { // save as document templates ScopedVclPtrInstance< SfxTemplateManagerDlg > aDlg; aDlg->setDocumentModel(GetModel()); aDlg->setSaveMode(); aDlg->Execute(); break; } case SID_CHECKOUT: { CheckOut( ); break; } case SID_CANCELCHECKOUT: { if (MessageDialog(NULL, SfxResId(STR_QUERY_CANCELCHECKOUT), VCL_MESSAGE_QUESTION, VCL_BUTTONS_YES_NO).Execute() == RET_YES) { CancelCheckOut( ); // Reload the document as we may still have local changes SfxViewFrame *pFrame = GetFrame(); if ( pFrame ) pFrame->GetDispatcher()->Execute(SID_RELOAD); } break; } case SID_CHECKIN: { CheckIn( ); break; } } // Prevent entry in the Pick-lists if ( rReq.IsAPI() ) GetMedium()->SetUpdatePickList( false ); else if ( rReq.GetArgs() ) { SFX_ITEMSET_GET( *rReq.GetArgs(), pPicklistItem, SfxBoolItem, SID_PICKLIST, false ); if ( pPicklistItem ) GetMedium()->SetUpdatePickList( pPicklistItem->GetValue() ); } // Ignore()-branches have already returned rReq.Done(); } void SfxObjectShell::GetState_Impl(SfxItemSet &rSet) { SfxWhichIter aIter( rSet ); for ( sal_uInt16 nWhich = aIter.FirstWhich(); nWhich; nWhich = aIter.NextWhich() ) { switch ( nWhich ) { case SID_DOCTEMPLATE : { if ( !GetFactory().GetTemplateFilter() ) rSet.DisableItem( nWhich ); break; } case SID_CHECKOUT: { bool bShow = false; Reference< XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY ); uno::Sequence< document::CmisProperty> aCmisProperties = xCmisDoc->getCmisProperties(); if ( xCmisDoc->isVersionable( ) && aCmisProperties.hasElements( ) ) { // Loop over the CMIS Properties to find cmis:isVersionSeriesCheckedOut bool bIsGoogleFile = false; bool bCheckedOut = false; for ( sal_Int32 i = 0; i < aCmisProperties.getLength(); ++i ) { if ( aCmisProperties[i].Id == "cmis:isVersionSeriesCheckedOut" ) { uno::Sequence< sal_Bool > bTmp; aCmisProperties[i].Value >>= bTmp; bCheckedOut = bTmp[0]; } // using title to know if it's a Google Drive file // maybe there's a safer way. if ( aCmisProperties[i].Name == "title" ) bIsGoogleFile = true; } bShow = !bCheckedOut && !bIsGoogleFile; } if ( !bShow ) { rSet.DisableItem( nWhich ); rSet.Put( SfxVisibilityItem( nWhich, false ) ); } } break; case SID_CANCELCHECKOUT: case SID_CHECKIN: { bool bShow = false; Reference< XCmisDocument > xCmisDoc( GetModel(), uno::UNO_QUERY ); uno::Sequence< document::CmisProperty> aCmisProperties = xCmisDoc->getCmisProperties( ); if ( xCmisDoc->isVersionable( ) && aCmisProperties.hasElements( ) ) { // Loop over the CMIS Properties to find cmis:isVersionSeriesCheckedOut bool bFoundCheckedout = false; bool bCheckedOut = false; for ( sal_Int32 i = 0; i < aCmisProperties.getLength() && !bFoundCheckedout; ++i ) { if ( aCmisProperties[i].Id == "cmis:isVersionSeriesCheckedOut" ) { bFoundCheckedout = true; uno::Sequence< sal_Bool > bTmp; aCmisProperties[i].Value >>= bTmp; bCheckedOut = bTmp[0]; } } bShow = bCheckedOut; } if ( !bShow ) { rSet.DisableItem( nWhich ); rSet.Put( SfxVisibilityItem( nWhich, false ) ); } } break; case SID_VERSION: { SfxObjectShell *pDoc = this; SfxViewFrame* pFrame = GetFrame(); if ( !pFrame ) pFrame = SfxViewFrame::GetFirst( this ); if ( pFrame ) { if ( pFrame->GetFrame().GetParentFrame() ) { pFrame = pFrame->GetTopViewFrame(); pDoc = pFrame->GetObjectShell(); } } if ( !pFrame || !pDoc->HasName() || !IsOwnStorageFormat_Impl( *pDoc->GetMedium() ) ) rSet.DisableItem( nWhich ); break; } case SID_SAVEDOC: { SvtMiscOptions aMiscOptions; bool bAlwaysAllowSave = aMiscOptions.IsSaveAlwaysAllowed(); bool bAllowSave = (bAlwaysAllowSave || IsModified()); bool bMediumRO = IsReadOnlyMedium(); if ( !bMediumRO && GetMedium() && bAllowSave ) rSet.Put(SfxStringItem( nWhich, SfxResId(STR_SAVEDOC).toString())); else rSet.DisableItem(nWhich); } break; case SID_DOCINFO: if ( pImp->eFlags & SfxObjectShellFlags::NODOCINFO ) rSet.DisableItem( nWhich ); break; case SID_CLOSEDOC: { SfxObjectShell *pDoc = this; SfxViewFrame *pFrame = GetFrame(); if ( pFrame && pFrame->GetFrame().GetParentFrame() ) { // If SID_CLOSEDOC is executed through menu and so on, but // the current document is in a frame, then the // FrameSetDocument should actually be closed. pDoc = pFrame->GetTopViewFrame()->GetObjectShell(); } if ( pDoc->GetFlags() & SfxObjectShellFlags::DONTCLOSE ) rSet.DisableItem(nWhich); else rSet.Put(SfxStringItem(nWhich, SfxResId(STR_CLOSEDOC).toString())); break; } case SID_SAVEASDOC: { if( !( pImp->nLoadedFlags & SfxLoadedFlags::MAINDOCUMENT ) ) { rSet.DisableItem( nWhich ); break; } if ( /*!pCombinedFilters ||*/ !GetMedium() ) rSet.DisableItem( nWhich ); else rSet.Put( SfxStringItem( nWhich, SfxResId(STR_SAVEASDOC).toString() ) ); break; } case SID_SAVEACOPY: { if( !( pImp->nLoadedFlags & SfxLoadedFlags::MAINDOCUMENT ) ) { rSet.DisableItem( nWhich ); break; } if ( /*!pCombinedFilters ||*/ !GetMedium() ) rSet.DisableItem( nWhich ); else rSet.Put( SfxStringItem( nWhich, SfxResId(STR_SAVEACOPY).toString() ) ); break; } case SID_EXPORTDOCASPDF: case SID_DIRECTEXPORTDOCASPDF: { break; } case SID_DOC_MODIFIED: { rSet.Put( SfxBoolItem( SID_DOC_MODIFIED, IsModified() ) ); break; } case SID_MODIFIED: { rSet.Put( SfxBoolItem( SID_MODIFIED, IsModified() ) ); break; } case SID_DOCINFO_TITLE: { rSet.Put( SfxStringItem( SID_DOCINFO_TITLE, getDocProperties()->getTitle() ) ); break; } case SID_FILE_NAME: { if( GetMedium() && HasName() ) rSet.Put( SfxStringItem( SID_FILE_NAME, GetMedium()->GetName() ) ); break; } case SID_SIGNATURE: { rSet.Put( SfxUInt16Item( SID_SIGNATURE, static_cast(GetDocumentSignatureState()) ) ); break; } case SID_MACRO_SIGNATURE: { // the slot makes sense only if there is a macro in the document if ( pImp->documentStorageHasMacros() || pImp->aMacroMode.hasMacroLibrary() ) rSet.Put( SfxUInt16Item( SID_MACRO_SIGNATURE, static_cast(GetScriptingSignatureState()) ) ); else rSet.DisableItem( nWhich ); break; } } } } void SfxObjectShell::ExecProps_Impl(SfxRequest &rReq) { switch ( rReq.GetSlot() ) { case SID_MODIFIED: { SetModified( static_cast(rReq.GetArgs()->Get(SID_MODIFIED)).GetValue() ); rReq.Done(); break; } case SID_DOCTITLE: SetTitle( static_cast(rReq.GetArgs()->Get(SID_DOCTITLE)).GetValue() ); rReq.Done(); break; case SID_DOCINFO_AUTHOR : { OUString aStr = static_cast(rReq.GetArgs()->Get(rReq.GetSlot())).GetValue(); getDocProperties()->setAuthor( aStr ); break; } case SID_DOCINFO_COMMENTS : { OUString aStr = static_cast(rReq.GetArgs()->Get(rReq.GetSlot())).GetValue(); getDocProperties()->setDescription( aStr ); break; } case SID_DOCINFO_KEYWORDS : { OUString aStr = static_cast(rReq.GetArgs()->Get(rReq.GetSlot())).GetValue(); getDocProperties()->setKeywords( ::comphelper::string::convertCommaSeparated(aStr) ); break; } } } void SfxObjectShell::StateProps_Impl(SfxItemSet &rSet) { SfxWhichIter aIter(rSet); for ( sal_uInt16 nSID = aIter.FirstWhich(); nSID; nSID = aIter.NextWhich() ) { switch ( nSID ) { case SID_DOCINFO_AUTHOR : { rSet.Put( SfxStringItem( nSID, getDocProperties()->getAuthor() ) ); break; } case SID_DOCINFO_COMMENTS : { rSet.Put( SfxStringItem( nSID, getDocProperties()->getDescription()) ); break; } case SID_DOCINFO_KEYWORDS : { rSet.Put( SfxStringItem( nSID, ::comphelper::string:: convertCommaSeparated(getDocProperties()->getKeywords())) ); break; } case SID_DOCPATH: { OSL_FAIL( "Not supported anymore!" ); break; } case SID_DOCFULLNAME: { rSet.Put( SfxStringItem( SID_DOCFULLNAME, GetTitle(SFX_TITLE_FULLNAME) ) ); break; } case SID_DOCTITLE: { rSet.Put( SfxStringItem( SID_DOCTITLE, GetTitle() ) ); break; } case SID_DOC_READONLY: { rSet.Put( SfxBoolItem( SID_DOC_READONLY, IsReadOnly() ) ); break; } case SID_DOC_SAVED: { rSet.Put( SfxBoolItem( SID_DOC_SAVED, !IsModified() ) ); break; } case SID_CLOSING: { rSet.Put( SfxBoolItem( SID_CLOSING, false ) ); break; } case SID_DOC_LOADING: rSet.Put( SfxBoolItem( nSID, ! ( pImp->nLoadedFlags & SfxLoadedFlags::MAINDOCUMENT ) ) ); break; case SID_IMG_LOADING: rSet.Put( SfxBoolItem( nSID, ! ( pImp->nLoadedFlags & SfxLoadedFlags::IMAGES ) ) ); break; } } } void SfxObjectShell::ExecView_Impl(SfxRequest &rReq) { switch ( rReq.GetSlot() ) { case SID_ACTIVATE: { SfxViewFrame *pFrame = SfxViewFrame::GetFirst( this, true ); if ( pFrame ) pFrame->GetFrame().Appear(); rReq.SetReturnValue( SfxObjectItem( 0, pFrame ) ); rReq.Done(); break; } case SID_NEWWINDOWFOREDIT: { SfxViewFrame* pFrame = SfxViewFrame::Current(); if( pFrame->GetObjectShell() == this && ( pFrame->GetFrameType() & SFXFRAME_HASTITLE ) ) pFrame->ExecuteSlot( rReq ); else { OUString aFileName( GetObjectShell()->GetMedium()->GetName() ); if ( !aFileName.isEmpty() ) { SfxStringItem aName( SID_FILE_NAME, aFileName ); SfxBoolItem aCreateView( SID_OPEN_NEW_VIEW, true ); SfxGetpApp()->GetAppDispatcher_Impl()->Execute( SID_OPENDOC, SfxCallMode::ASYNCHRON, &aName, &aCreateView, 0L); } } } } } void SfxObjectShell::StateView_Impl(SfxItemSet& /*rSet*/) { } SignatureState SfxObjectShell::ImplCheckSignaturesInformation( const uno::Sequence< security::DocumentSignatureInformation >& aInfos ) { bool bCertValid = true; SignatureState nResult = SignatureState::NOSIGNATURES; int nInfos = aInfos.getLength(); bool bCompleteSignature = true; if( nInfos ) { nResult = SignatureState::OK; for ( int n = 0; n < nInfos; n++ ) { if ( bCertValid ) { sal_Int32 nCertStat = aInfos[n].CertificateStatus; bCertValid = nCertStat == security::CertificateValidity::VALID; } if ( !aInfos[n].SignatureIsValid ) { nResult = SignatureState::BROKEN; break; // we know enough } bCompleteSignature &= !aInfos[n].PartialDocumentSignature; } } if ( nResult == SignatureState::OK && !bCertValid ) nResult = SignatureState::NOTVALIDATED; else if ( nResult == SignatureState::OK && bCertValid && !bCompleteSignature) nResult = SignatureState::PARTIAL_OK; // this code must not check whether the document is modified // it should only check the provided info return nResult; } uno::Sequence< security::DocumentSignatureInformation > SfxObjectShell::ImplAnalyzeSignature( bool bScriptingContent, const uno::Reference< security::XDocumentDigitalSignatures >& xSigner ) { uno::Sequence< security::DocumentSignatureInformation > aResult; uno::Reference< security::XDocumentDigitalSignatures > xLocSigner = xSigner; if ( GetMedium() && !GetMedium()->GetName().isEmpty() && IsOwnStorageFormat_Impl( *GetMedium()) && GetMedium()->GetStorage().is() ) { try { if ( !xLocSigner.is() ) { OUString aVersion; try { uno::Reference < beans::XPropertySet > xPropSet( GetStorage(), uno::UNO_QUERY_THROW ); xPropSet->getPropertyValue("Version") >>= aVersion; } catch( uno::Exception& ) { } xLocSigner.set( security::DocumentDigitalSignatures::createWithVersion(comphelper::getProcessComponentContext(), aVersion) ); } if ( bScriptingContent ) aResult = xLocSigner->verifyScriptingContentSignatures( GetMedium()->GetZipStorageToSign_Impl(), uno::Reference< io::XInputStream >() ); else aResult = xLocSigner->verifyDocumentContentSignatures( GetMedium()->GetZipStorageToSign_Impl(), uno::Reference< io::XInputStream >() ); } catch( com::sun::star::uno::Exception& ) { } } return aResult; } SignatureState SfxObjectShell::ImplGetSignatureState( bool bScriptingContent ) { SignatureState* pState = bScriptingContent ? &pImp->nScriptingSignatureState : &pImp->nDocumentSignatureState; if ( *pState == SignatureState::UNKNOWN ) { *pState = SignatureState::NOSIGNATURES; uno::Sequence< security::DocumentSignatureInformation > aInfos = ImplAnalyzeSignature( bScriptingContent ); *pState = ImplCheckSignaturesInformation( aInfos ); } if ( *pState == SignatureState::OK || *pState == SignatureState::NOTVALIDATED || *pState == SignatureState::PARTIAL_OK) { if ( IsModified() ) *pState = SignatureState::INVALID; } return *pState; } void SfxObjectShell::ImplSign( bool bScriptingContent ) { // Check if it is stored in OASIS format... if ( GetMedium() && GetMedium()->GetFilter() && !GetMedium()->GetName().isEmpty() && ( !GetMedium()->GetFilter()->IsOwnFormat() || !GetMedium()->HasStorage_Impl() ) ) { // Only OASIS and OOo6.x formats will be handled further MessageDialog( NULL, SfxResId( STR_INFO_WRONGDOCFORMAT ), VCL_MESSAGE_INFO ).Execute(); return; } // check whether the document is signed ImplGetSignatureState( false ); // document signature ImplGetSignatureState( true ); // script signature bool bHasSign = ( pImp->nScriptingSignatureState != SignatureState::NOSIGNATURES || pImp->nDocumentSignatureState != SignatureState::NOSIGNATURES ); // the target ODF version on saving SvtSaveOptions aSaveOpt; SvtSaveOptions::ODFDefaultVersion nVersion = aSaveOpt.GetODFDefaultVersion(); // the document is not new and is not modified OUString aODFVersion; try { // check the version of the document uno::Reference < beans::XPropertySet > xPropSet( GetStorage(), uno::UNO_QUERY_THROW ); xPropSet->getPropertyValue("Version") >>= aODFVersion; } catch( uno::Exception& ) {} bool bNoSig = false; if ( IsModified() || !GetMedium() || GetMedium()->GetName().isEmpty() || (aODFVersion != ODFVER_012_TEXT && !bHasSign) ) { // the document might need saving ( new, modified or in ODF1.1 format without signature ) if ( nVersion >= SvtSaveOptions::ODFVER_012 ) { if ( (bHasSign && MessageDialog(NULL, SfxResId(STR_XMLSEC_QUERY_SAVESIGNEDBEFORESIGN), VCL_MESSAGE_QUESTION, VCL_BUTTONS_YES_NO).Execute() == RET_YES) || (!bHasSign && MessageDialog(NULL, SfxResId(RID_SVXSTR_XMLSEC_QUERY_SAVEBEFORESIGN), VCL_MESSAGE_QUESTION, VCL_BUTTONS_YES_NO).Execute() == RET_YES) ) { sal_uInt16 nId = SID_SAVEDOC; if ( !GetMedium() || GetMedium()->GetName().isEmpty() ) nId = SID_SAVEASDOC; SfxRequest aSaveRequest( nId, SfxCallMode::SLOT, GetPool() ); //ToDo: Review. We needed to call SetModified, otherwise the document would not be saved. SetModified(true); ExecFile_Impl( aSaveRequest ); // Check if it is stored in OASIS format... if ( GetMedium() && GetMedium()->GetFilter() && ( !GetMedium()->GetFilter()->IsOwnFormat() || !GetMedium()->HasStorage_Impl() || SotStorage::GetVersion( GetMedium()->GetStorage() ) <= SOFFICE_FILEFORMAT_60 ) ) { // Only OASIS format will be handled further MessageDialog( NULL, SfxResId( STR_INFO_WRONGDOCFORMAT ), VCL_MESSAGE_INFO ).Execute(); return; } } else { // When the document is modified then we must not show the // digital signatures dialog // If we have come here then the user denied to save. if (!bHasSign) bNoSig = true; } } else { MessageDialog(NULL, SfxResId(STR_XMLSEC_ODF12_EXPECTED)).Execute(); return; } if ( IsModified() || !GetMedium() || GetMedium()->GetName().isEmpty() ) return; } // the document is not modified currently, so it can not become modified after signing bool bAllowModifiedBack = false; if ( IsEnableSetModified() ) { EnableSetModified( false ); bAllowModifiedBack = true; } // we have to store to the original document, the original medium should be closed for this time if ( !bNoSig && ConnectTmpStorage_Impl( pMedium->GetStorage(), pMedium ) ) { GetMedium()->CloseAndRelease(); // We sign only ODF1.2, that means that if this point has been reached, // the ODF1.2 signing process should be used. // This code still might be called to show the signature of ODF1.1 document. bool bSigned = GetMedium()->SignContents_Impl( bScriptingContent, aODFVersion, pImp->nDocumentSignatureState == SignatureState::OK || pImp->nDocumentSignatureState == SignatureState::NOTVALIDATED || pImp->nDocumentSignatureState == SignatureState::PARTIAL_OK); DoSaveCompleted( GetMedium() ); if ( bSigned ) { if ( bScriptingContent ) { pImp->nScriptingSignatureState = SignatureState::UNKNOWN;// Re-Check // adding of scripting signature removes existing document signature pImp->nDocumentSignatureState = SignatureState::UNKNOWN;// Re-Check } else pImp->nDocumentSignatureState = SignatureState::UNKNOWN;// Re-Check pImp->bSignatureErrorIsShown = false; Invalidate( SID_SIGNATURE ); Invalidate( SID_MACRO_SIGNATURE ); Broadcast( SfxSimpleHint(SFX_HINT_TITLECHANGED) ); } } if ( bAllowModifiedBack ) EnableSetModified( true ); } SignatureState SfxObjectShell::GetDocumentSignatureState() { return ImplGetSignatureState( false ); } void SfxObjectShell::SignDocumentContent() { ImplSign( false ); } SignatureState SfxObjectShell::GetScriptingSignatureState() { return ImplGetSignatureState( true ); } void SfxObjectShell::SignScriptingContent() { ImplSign( true ); } namespace { class theSfxObjectShellUnoTunnelId : public rtl::Static< UnoTunnelIdInit, theSfxObjectShellUnoTunnelId > {}; } const uno::Sequence& SfxObjectShell::getUnoTunnelId() { return theSfxObjectShellUnoTunnelId::get().getSeq(); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */