/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define ShellClass_ScFormatShell #define ShellClass_TableFont #define ShellClass_FormatForSelection #include #include #include #include namespace { SvxCellHorJustify lclConvertSlotToHAlign( sal_uInt16 nSlot ) { SvxCellHorJustify eHJustify = SvxCellHorJustify::Standard; switch( nSlot ) { case SID_ALIGN_ANY_HDEFAULT: eHJustify = SvxCellHorJustify::Standard; break; case SID_ALIGN_ANY_LEFT: eHJustify = SvxCellHorJustify::Left; break; case SID_ALIGN_ANY_HCENTER: eHJustify = SvxCellHorJustify::Center; break; case SID_ALIGN_ANY_RIGHT: eHJustify = SvxCellHorJustify::Right; break; case SID_ALIGN_ANY_JUSTIFIED: eHJustify = SvxCellHorJustify::Block; break; default: OSL_FAIL( "lclConvertSlotToHAlign - invalid slot" ); } return eHJustify; } SvxCellVerJustify lclConvertSlotToVAlign( sal_uInt16 nSlot ) { SvxCellVerJustify eVJustify = SvxCellVerJustify::Standard; switch( nSlot ) { case SID_ALIGN_ANY_VDEFAULT: eVJustify = SvxCellVerJustify::Standard; break; case SID_ALIGN_ANY_TOP: eVJustify = SvxCellVerJustify::Top; break; case SID_ALIGN_ANY_VCENTER: eVJustify = SvxCellVerJustify::Center; break; case SID_ALIGN_ANY_BOTTOM: eVJustify = SvxCellVerJustify::Bottom; break; default: OSL_FAIL( "lclConvertSlotToVAlign - invalid slot" ); } return eVJustify; } } // namespace SFX_IMPL_INTERFACE(ScFormatShell, SfxShell) void ScFormatShell::InitInterface_Impl() { GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Standard | SfxVisibilityFlags::Server, ToolbarId::Objectbar_Format); } ScFormatShell::ScFormatShell(ScViewData& rData) : SfxShell(rData.GetViewShell()), rViewData(rData) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); SetPool( &pTabViewShell->GetPool() ); SfxUndoManager* pMgr = rViewData.GetSfxDocShell()->GetUndoManager(); SetUndoManager( pMgr ); if (pMgr && !rViewData.GetDocument().IsUndoEnabled()) { pMgr->SetMaxUndoActionCount( 0 ); } SetName(u"Format"_ustr); } ScFormatShell::~ScFormatShell() { } void ScFormatShell::ExecuteStyle( SfxRequest& rReq ) { const SfxItemSet* pArgs = rReq.GetArgs(); const sal_uInt16 nSlotId = rReq.GetSlot(); ScDocShell* pDocSh = GetViewData().GetDocShell(); ScTabViewShell* pTabViewShell= GetViewData().GetViewShell(); ScDocument& rDoc = pDocSh->GetDocument(); SfxStyleSheetBasePool* pStylePool = rDoc.GetStyleSheetPool(); if ( (nSlotId == SID_STYLE_PREVIEW) || (nSlotId == SID_STYLE_END_PREVIEW) ) { if (nSlotId == SID_STYLE_PREVIEW) { SfxStyleFamily eFamily = SfxStyleFamily::Para; const SfxUInt16Item* pFamItem; if ( pArgs && (pFamItem = pArgs->GetItemIfSet( SID_STYLE_FAMILY )) ) eFamily = static_cast(pFamItem->GetValue()); const SfxPoolItem* pNameItem; OUString aStyleName; if (pArgs && SfxItemState::SET == pArgs->GetItemState( nSlotId, true, &pNameItem )) aStyleName = static_cast(pNameItem)->GetValue(); if ( eFamily == SfxStyleFamily::Para ) // CellStyles { ScMarkData aFuncMark( rViewData.GetMarkData() ); ScViewUtil::UnmarkFiltered( aFuncMark, rDoc ); aFuncMark.MarkToMulti(); if ( !aFuncMark.IsMarked() && !aFuncMark.IsMultiMarked() ) { SCCOL nCol = rViewData.GetCurX(); SCROW nRow = rViewData.GetCurY(); SCTAB nTab = rViewData.GetTabNo(); ScRange aRange( nCol, nRow, nTab ); aFuncMark.SetMarkArea( aRange ); } rDoc.SetPreviewSelection( aFuncMark ); ScStyleSheet* pPreviewStyle = static_cast( pStylePool->Find( aStyleName, eFamily ) ); rDoc.SetPreviewCellStyle( pPreviewStyle ); ScPatternAttr aAttr( *rDoc.GetSelectionPattern( aFuncMark ) ); aAttr.SetStyleSheet( pPreviewStyle ); SfxItemSet aItemSet( GetPool() ); ScPatternAttr aNewAttrs(GetViewData().GetDocument().getCellAttributeHelper()); SfxItemSet& rNewSet = aNewAttrs.GetItemSet(); rNewSet.Put( aItemSet, false ); rDoc.ApplySelectionPattern( aNewAttrs, rDoc.GetPreviewSelection() ); pTabViewShell->UpdateSelectionArea( aFuncMark, &aAttr ); } } else { // No mark at all happens when creating a new document, in which // case the selection pattern obtained would be empty (created of // GetPool()) anyway and nothing needs to be applied. ScMarkData aPreviewMark( rDoc.GetPreviewSelection()); if (aPreviewMark.IsMarked() || aPreviewMark.IsMultiMarked()) { ScPatternAttr aAttr( *rDoc.GetSelectionPattern( aPreviewMark ) ); if ( ScStyleSheet* pPreviewStyle = rDoc.GetPreviewCellStyle() ) aAttr.SetStyleSheet( pPreviewStyle ); rDoc.SetPreviewCellStyle(nullptr); SfxItemSet aItemSet( GetPool() ); ScPatternAttr aNewAttrs(GetViewData().GetDocument().getCellAttributeHelper()); SfxItemSet& rNewSet = aNewAttrs.GetItemSet(); rNewSet.Put( aItemSet, false ); rDoc.ApplySelectionPattern( aNewAttrs, aPreviewMark ); pTabViewShell->UpdateSelectionArea( aPreviewMark, &aAttr ); } } } else if (nSlotId == SID_CLASSIFICATION_APPLY) { const SfxPoolItem* pItem = nullptr; if (pArgs && pArgs->GetItemState(nSlotId, false, &pItem) == SfxItemState::SET) { const OUString& rName = static_cast(pItem)->GetValue(); SfxClassificationHelper aHelper(pDocSh->getDocProperties()); auto eType = SfxClassificationPolicyType::IntellectualProperty; if (const SfxStringItem* pNameItem = pArgs->GetItemIfSet(SID_TYPE_NAME, false)) { const OUString& rType = pNameItem->GetValue(); eType = SfxClassificationHelper::stringToPolicyType(rType); } aHelper.SetBACName(rName, eType); } else SAL_WARN("sc.ui", "missing parameter for SID_CLASSIFICATION_APPLY"); } else { OSL_FAIL( "Unknown slot (ScViewShell::ExecuteStyle)" ); } } void ScFormatShell::ExecuteNumFormat( SfxRequest& rReq ) { ScModule* pScMod = SC_MOD(); ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); const SfxItemSet* pReqArgs = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); SfxBindings& rBindings = pTabViewShell->GetViewFrame().GetBindings(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox // End input if ( GetViewData().HasEditView( GetViewData().GetActivePart() ) ) { switch ( nSlot ) { case SID_NUMBER_TYPE_FORMAT: case SID_NUMBER_TWODEC: case SID_NUMBER_SCIENTIFIC: case SID_NUMBER_DATE: case SID_NUMBER_CURRENCY: case SID_NUMBER_PERCENT: case SID_NUMBER_STANDARD: case SID_NUMBER_FORMAT: case SID_NUMBER_INCDEC: case SID_NUMBER_DECDEC: case SID_NUMBER_THOUSANDS: case FID_DEFINE_NAME: case FID_ADD_NAME: case FID_USE_NAME: case FID_INSERT_NAME: case SID_SPELL_DIALOG: case SID_HANGUL_HANJA_CONVERSION: pScMod->InputEnterHandler(); pTabViewShell->UpdateInputHandler(); break; default: break; } } SvNumFormatType nType = GetCurrentNumberFormatType(); switch ( nSlot ) { case SID_NUMBER_TWODEC: { const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); sal_uInt32 nNumberFormat = rAttrSet.Get(ATTR_VALUE_FORMAT).GetValue(); if ((nType & SvNumFormatType::NUMBER) && nNumberFormat == 4) pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); else pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER, 4 ); rBindings.Invalidate( nSlot ); rReq.Done(); } break; case SID_NUMBER_SCIENTIFIC: if (nType & SvNumFormatType::SCIENTIFIC) pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); else pTabViewShell->SetNumberFormat( SvNumFormatType::SCIENTIFIC ); rBindings.Invalidate( nSlot ); rReq.Done(); break; case SID_NUMBER_DATE: if (nType & SvNumFormatType::DATE) pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); else pTabViewShell->SetNumberFormat( SvNumFormatType::DATE ); rBindings.Invalidate( nSlot ); rReq.Done(); break; case SID_NUMBER_TIME: if (nType & SvNumFormatType::TIME) pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); else pTabViewShell->SetNumberFormat( SvNumFormatType::TIME ); rBindings.Invalidate( nSlot ); rReq.Done(); break; case SID_NUMBER_CURRENCY: if(pReqArgs) { const SfxPoolItem* pItem; if ( pReqArgs->HasItem( SID_NUMBER_CURRENCY, &pItem ) ) { sal_uInt32 nNewFormat = static_cast(pItem)->GetValue(); ScDocument& rDoc = rViewData.GetDocument(); SvNumberFormatter* pFormatter = rDoc.GetFormatTable(); const SfxItemSet& rOldSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); LanguageType eOldLang = rOldSet.Get( ATTR_LANGUAGE_FORMAT ).GetLanguage(); sal_uInt32 nOldFormat = rOldSet.Get( ATTR_VALUE_FORMAT ).GetValue(); if ( nOldFormat != nNewFormat ) { const SvNumberformat* pNewEntry = pFormatter->GetEntry( nNewFormat ); ScPatternAttr aNewAttrs(rDoc.getCellAttributeHelper()); SfxItemSet& rSet = aNewAttrs.GetItemSet(); LanguageType eNewLang = pNewEntry ? pNewEntry->GetLanguage() : LANGUAGE_DONTKNOW; if ( eNewLang != eOldLang && eNewLang != LANGUAGE_DONTKNOW ) rSet.Put( SvxLanguageItem( eNewLang, ATTR_LANGUAGE_FORMAT ) ); rSet.Put( SfxUInt32Item( ATTR_VALUE_FORMAT, nNewFormat ) ); pTabViewShell->ApplySelectionPattern( aNewAttrs ); } else pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); } } else { if ( nType & SvNumFormatType::CURRENCY ) pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); else pTabViewShell->SetNumberFormat( SvNumFormatType::CURRENCY ); } rBindings.Invalidate( nSlot ); rReq.Done(); break; case SID_NUMBER_PERCENT: if (nType & SvNumFormatType::PERCENT) pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); else pTabViewShell->SetNumberFormat( SvNumFormatType::PERCENT ); rBindings.Invalidate( nSlot ); rReq.Done(); break; case SID_NUMBER_STANDARD: pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER ); rReq.Done(); break; case SID_NUMBER_INCDEC: pTabViewShell->ChangeNumFmtDecimals( true ); rReq.Done(); break; case SID_NUMBER_DECDEC: pTabViewShell->ChangeNumFmtDecimals( false ); rReq.Done(); break; case SID_NUMBER_THOUSANDS: { ScDocument& rDoc = rViewData.GetDocument(); SvNumberFormatter* pFormatter = rDoc.GetFormatTable(); bool bThousand(false); bool bNegRed(false); sal_uInt16 nPrecision(0); sal_uInt16 nLeadZeroes(0); LanguageType eLanguage = ScGlobal::eLnge; sal_uInt32 nCurrentNumberFormat = rDoc.GetNumberFormat( rViewData.GetCurX(), rViewData.GetCurY(), rViewData.GetTabNo()); const SvNumberformat* pEntry = pFormatter->GetEntry(nCurrentNumberFormat); if (pEntry) eLanguage = pEntry->GetLanguage(); pFormatter->GetFormatSpecialInfo(nCurrentNumberFormat, bThousand, bNegRed, nPrecision, nLeadZeroes); bThousand = !bThousand; OUString aCode = pFormatter->GenerateFormat( nCurrentNumberFormat, eLanguage, bThousand, bNegRed, nPrecision, nLeadZeroes); pTabViewShell->SetNumFmtByStr(aCode); rBindings.Invalidate(nSlot); rReq.Done(); } break; case SID_NUMBER_FORMAT: // symphony version with format interpretation if(pReqArgs) { const SfxPoolItem* pItem; ScDocument& rDoc = rViewData.GetDocument(); SvNumberFormatter* pFormatter = rDoc.GetFormatTable(); sal_uInt32 nCurrentNumberFormat = rDoc.GetNumberFormat( rViewData.GetCurX(), rViewData.GetCurY(), rViewData.GetTabNo()); const SvNumberformat* pEntry = pFormatter->GetEntry(nCurrentNumberFormat); if(!pEntry) break; LanguageType eLanguage = pEntry->GetLanguage(); SvNumFormatType eType = pEntry->GetMaskedType(); //Just use eType to judge whether the command is fired for NUMBER/PERCENT/CURRENCY/SCIENTIFIC/FRACTION/TIME //In sidebar, users can fire SID_NUMBER_FORMAT command by operating the related UI controls before they are disable if(!(eType == SvNumFormatType::ALL || eType == SvNumFormatType::NUMBER || eType == SvNumFormatType::PERCENT || eType == SvNumFormatType::CURRENCY || eType == SvNumFormatType::SCIENTIFIC || eType == SvNumFormatType::TIME || eType == SvNumFormatType::FRACTION)) pEntry = nullptr; if(SfxItemState::SET == pReqArgs->GetItemState(nSlot, true, &pItem) && pEntry) { OUString aCode = static_cast(pItem)->GetValue(); sal_uInt16 aLen = aCode.getLength(); std::unique_ptr sFormat( new OUString[4] ); OUStringBuffer sTmpStr; sal_uInt16 nCount(0); sal_uInt16 nStrCount(0); while(nCount < aLen) { sal_Unicode cChar = aCode[nCount]; if(cChar == ',') { sFormat[nStrCount] = sTmpStr.makeStringAndClear(); nStrCount++; } else { sTmpStr.append(cChar); } nCount++; if(nStrCount > 3) break; } const bool bThousand = static_cast(sFormat[0].toInt32()); const bool bNegRed = static_cast(sFormat[1].toInt32()); const sal_uInt16 nPrecision = static_cast(sFormat[2].toInt32()); const sal_uInt16 nLeadZeroes = static_cast(sFormat[3].toInt32()); aCode = pFormatter->GenerateFormat( nCurrentNumberFormat,//modify eLanguage, bThousand, bNegRed, nPrecision, nLeadZeroes); pTabViewShell->SetNumFmtByStr(aCode); } } break; case SID_ATTR_NUMBERFORMAT_VALUE: if ( pReqArgs ) { if ( const SfxUInt32Item* pItem = pReqArgs->GetItemIfSet( ATTR_VALUE_FORMAT ) ) { // We have to accomplish this using ApplyAttributes() // because we also need the language information to be // considered. const SfxItemSet& rOldSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); SfxItemPool* pDocPool = GetViewData().GetDocument().GetPool(); SfxItemSetFixed aNewSet( *pDocPool ); aNewSet.Put( *pItem ); pTabViewShell->ApplyAttributes( aNewSet, rOldSet ); } } break; case SID_NUMBER_TYPE_FORMAT: if ( pReqArgs ) { const SfxPoolItem* pItem; if ( pReqArgs->GetItemState( nSlot, true, &pItem ) == SfxItemState::SET ) { sal_uInt16 nFormat = static_cast(pItem)->GetValue(); switch(nFormat) { case 0: pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER); //Modify break; case 1: pTabViewShell->SetNumberFormat( SvNumFormatType::NUMBER, 2 ); //Modify break; case 2: pTabViewShell->SetNumberFormat( SvNumFormatType::PERCENT ); break; case 3: pTabViewShell->SetNumberFormat( SvNumFormatType::CURRENCY ); break; case 4: pTabViewShell->SetNumberFormat( SvNumFormatType::DATE ); break; case 5: pTabViewShell->SetNumberFormat( SvNumFormatType::TIME ); break; case 6: pTabViewShell->SetNumberFormat( SvNumFormatType::SCIENTIFIC ); break; case 7: pTabViewShell->SetNumberFormat( SvNumFormatType::FRACTION ); break; case 8: pTabViewShell->SetNumberFormat( SvNumFormatType::LOGICAL ); break; case 9: pTabViewShell->SetNumberFormat( SvNumFormatType::TEXT ); break; default: ; } rReq.Done(); } } break; default: OSL_FAIL("ExecuteEdit: invalid slot"); break; } } void ScFormatShell::ExecuteAlignment( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); SfxBindings& rBindings = rViewData.GetBindings(); const SfxItemSet* pSet = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox switch( nSlot ) { // pseudo slots for Format menu case SID_ALIGN_ANY_HDEFAULT: case SID_ALIGN_ANY_LEFT: case SID_ALIGN_ANY_HCENTER: case SID_ALIGN_ANY_RIGHT: case SID_ALIGN_ANY_JUSTIFIED: pTabViewShell->ApplyAttr( SvxHorJustifyItem( lclConvertSlotToHAlign( nSlot ), ATTR_HOR_JUSTIFY ) ); break; case SID_ALIGN_ANY_VDEFAULT: case SID_ALIGN_ANY_TOP: case SID_ALIGN_ANY_VCENTER: case SID_ALIGN_ANY_BOTTOM: pTabViewShell->ApplyAttr( SvxVerJustifyItem( lclConvertSlotToVAlign( nSlot ), ATTR_VER_JUSTIFY ) ); break; default: if( pSet ) { const SfxPoolItem* pItem = nullptr; if( pSet->GetItemState(GetPool().GetWhichIDFromSlotID(nSlot), true, &pItem ) == SfxItemState::SET ) { switch ( nSlot ) { case SID_ATTR_ALIGN_HOR_JUSTIFY: case SID_ATTR_ALIGN_VER_JUSTIFY: case SID_ATTR_ALIGN_INDENT: case SID_ATTR_ALIGN_HYPHENATION: case SID_ATTR_ALIGN_DEGREES: case SID_ATTR_ALIGN_LOCKPOS: case SID_ATTR_ALIGN_MARGIN: case SID_ATTR_ALIGN_STACKED: pTabViewShell->ApplyAttr( *pItem ); break; case SID_H_ALIGNCELL: { SvxCellHorJustify eJust = static_cast(pItem)->GetValue(); // #i78476# update alignment of text in cell edit mode pTabViewShell->UpdateInputHandlerCellAdjust( eJust ); pTabViewShell->ApplyAttr( SvxHorJustifyItem( eJust, ATTR_HOR_JUSTIFY ) ); } break; case SID_V_ALIGNCELL: pTabViewShell->ApplyAttr( SvxVerJustifyItem( static_cast(pItem)->GetValue(), ATTR_VER_JUSTIFY ) ); break; default: OSL_FAIL( "ExecuteAlignment: invalid slot" ); return; } } } } rBindings.Invalidate( SID_ATTR_PARA_ADJUST_LEFT ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_RIGHT ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_BLOCK ); rBindings.Invalidate( SID_ATTR_PARA_ADJUST_CENTER); rBindings.Invalidate( SID_ALIGNLEFT ); rBindings.Invalidate( SID_ALIGNRIGHT ); rBindings.Invalidate( SID_ALIGNCENTERHOR ); rBindings.Invalidate( SID_ALIGNBLOCK ); rBindings.Invalidate( SID_ALIGNTOP ); rBindings.Invalidate( SID_ALIGNBOTTOM ); rBindings.Invalidate( SID_ALIGNCENTERVER ); rBindings.Invalidate( SID_V_ALIGNCELL ); rBindings.Invalidate( SID_H_ALIGNCELL ); // pseudo slots for Format menu rBindings.Invalidate( SID_ALIGN_ANY_HDEFAULT ); rBindings.Invalidate( SID_ALIGN_ANY_LEFT ); rBindings.Invalidate( SID_ALIGN_ANY_HCENTER ); rBindings.Invalidate( SID_ALIGN_ANY_RIGHT ); rBindings.Invalidate( SID_ALIGN_ANY_JUSTIFIED ); rBindings.Invalidate( SID_ALIGN_ANY_VDEFAULT ); rBindings.Invalidate( SID_ALIGN_ANY_TOP ); rBindings.Invalidate( SID_ALIGN_ANY_VCENTER ); rBindings.Invalidate( SID_ALIGN_ANY_BOTTOM ); rBindings.Update(); if( ! rReq.IsAPI() ) rReq.Done(); } void ScFormatShell::ExecuteTextAttr( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); SfxBindings& rBindings = rViewData.GetBindings(); const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern(); const SfxItemSet* pSet = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); std::optional pNewSet; pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox if ( (nSlot == SID_ATTR_CHAR_WEIGHT) ||(nSlot == SID_ATTR_CHAR_POSTURE) ||(nSlot == SID_ATTR_CHAR_UNDERLINE) ||(nSlot == SID_ULINE_VAL_NONE) ||(nSlot == SID_ULINE_VAL_SINGLE) ||(nSlot == SID_ULINE_VAL_DOUBLE) ||(nSlot == SID_ULINE_VAL_DOTTED) ) { pNewSet.emplace( GetPool() ); switch ( nSlot ) { case SID_ATTR_CHAR_WEIGHT: { // #i78017 establish the same behaviour as in Writer SvtScriptType nScript = SvtScriptType::LATIN | SvtScriptType::ASIAN | SvtScriptType::COMPLEX; SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( nSlot, rPool ); if ( pSet ) aSetItem.PutItemForScriptType( nScript, pSet->Get( ATTR_FONT_WEIGHT ) ); else { // toggle manually FontWeight eWeight = WEIGHT_BOLD; SvxScriptSetItem aOldSetItem( nSlot, rPool ); aOldSetItem.GetItemSet().Put( pAttrs->GetItemSet(), false ); const SfxPoolItem* pCore = aOldSetItem.GetItemOfScript( nScript ); if ( pCore && static_cast(pCore)->GetWeight() == WEIGHT_BOLD ) eWeight = WEIGHT_NORMAL; aSetItem.PutItemForScriptType( nScript, SvxWeightItem( eWeight, ATTR_FONT_WEIGHT ) ); } pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); pNewSet->Put( aSetItem.GetItemSet(), false ); } break; case SID_ATTR_CHAR_POSTURE: { // #i78017 establish the same behaviour as in Writer SvtScriptType nScript = SvtScriptType::LATIN | SvtScriptType::ASIAN | SvtScriptType::COMPLEX; SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( nSlot, rPool ); if ( pSet ) aSetItem.PutItemForScriptType( nScript, pSet->Get( ATTR_FONT_POSTURE ) ); else { // toggle manually FontItalic eItalic = ITALIC_NORMAL; SvxScriptSetItem aOldSetItem( nSlot, rPool ); aOldSetItem.GetItemSet().Put( pAttrs->GetItemSet(), false ); const SfxPoolItem* pCore = aOldSetItem.GetItemOfScript( nScript ); if ( pCore && static_cast(pCore)->GetPosture() == ITALIC_NORMAL ) eItalic = ITALIC_NONE; aSetItem.PutItemForScriptType( nScript, SvxPostureItem( eItalic, ATTR_FONT_POSTURE ) ); } pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); pNewSet->Put( aSetItem.GetItemSet(), false ); } break; case SID_ATTR_CHAR_UNDERLINE: { if( pSet ) { const SfxPoolItem& rUnderline = pSet->Get( ATTR_FONT_UNDERLINE ); if( dynamic_cast( &rUnderline) != nullptr ) { pTabViewShell->ApplyAttr( rUnderline ); pNewSet->Put( rUnderline ); } else if ( auto pTextLineItem = dynamic_cast( &rUnderline) ) { // #i106580# also allow SvxTextLineItem (base class of SvxUnderlineItem) SvxUnderlineItem aNewItem( pTextLineItem->GetLineStyle(), pTextLineItem->Which() ); aNewItem.SetColor( pTextLineItem->GetColor() ); pTabViewShell->ApplyAttr( aNewItem ); pNewSet->Put( aNewItem ); } } else { SvxUnderlineItem aUnderline( pAttrs->GetItem( ATTR_FONT_UNDERLINE ) ); FontLineStyle eUnderline = (LINESTYLE_NONE != aUnderline.GetLineStyle()) ? LINESTYLE_NONE : LINESTYLE_SINGLE; aUnderline.SetLineStyle( eUnderline ); pTabViewShell->ApplyAttr( aUnderline ); pNewSet->Put( aUnderline ); } } break; case SID_ULINE_VAL_NONE: pTabViewShell->ApplyAttr( SvxUnderlineItem( LINESTYLE_NONE, ATTR_FONT_UNDERLINE ) ); break; case SID_ULINE_VAL_SINGLE: // Toggles case SID_ULINE_VAL_DOUBLE: case SID_ULINE_VAL_DOTTED: { FontLineStyle eOld = pAttrs->GetItem(ATTR_FONT_UNDERLINE).GetLineStyle(); FontLineStyle eNew = eOld; switch (nSlot) { case SID_ULINE_VAL_SINGLE: eNew = ( eOld == LINESTYLE_SINGLE ) ? LINESTYLE_NONE : LINESTYLE_SINGLE; break; case SID_ULINE_VAL_DOUBLE: eNew = ( eOld == LINESTYLE_DOUBLE ) ? LINESTYLE_NONE : LINESTYLE_DOUBLE; break; case SID_ULINE_VAL_DOTTED: eNew = ( eOld == LINESTYLE_DOTTED ) ? LINESTYLE_NONE : LINESTYLE_DOTTED; break; } pTabViewShell->ApplyAttr( SvxUnderlineItem( eNew, ATTR_FONT_UNDERLINE ) ); } break; default: break; } rBindings.Invalidate( nSlot ); } else { /* * "Self-made" functionality of radio buttons * At the toggle the default state is used, this means * no button was clicked. */ const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); const SvxHorJustifyItem* pHorJustify = rAttrSet.GetItemIfSet(ATTR_HOR_JUSTIFY); const SvxVerJustifyItem* pVerJustify = rAttrSet.GetItemIfSet(ATTR_VER_JUSTIFY ); SvxCellHorJustify eHorJustify = SvxCellHorJustify::Standard; SvxCellVerJustify eVerJustify = SvxCellVerJustify::Standard; if (pHorJustify) { eHorJustify = pHorJustify->GetValue(); } if (pVerJustify) { eVerJustify = pVerJustify->GetValue(); } switch ( nSlot ) { case SID_ALIGNLEFT: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SvxCellHorJustify::Left) ? SvxCellHorJustify::Left : SvxCellHorJustify::Standard, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; case SID_ALIGNRIGHT: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SvxCellHorJustify::Right) ? SvxCellHorJustify::Right : SvxCellHorJustify::Standard, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; case SID_ALIGNCENTERHOR: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SvxCellHorJustify::Center) ? SvxCellHorJustify::Center : SvxCellHorJustify::Standard, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; case SID_ALIGNBLOCK: rReq.SetSlot( SID_H_ALIGNCELL ); rReq.AppendItem( SvxHorJustifyItem( !pHorJustify || (eHorJustify != SvxCellHorJustify::Block) ? SvxCellHorJustify::Block : SvxCellHorJustify::Standard, SID_H_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; case SID_ALIGNTOP: rReq.SetSlot( SID_V_ALIGNCELL ); rReq.AppendItem( SvxVerJustifyItem( !pVerJustify || (eVerJustify != SvxCellVerJustify::Top) ? SvxCellVerJustify::Top : SvxCellVerJustify::Standard, SID_V_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; case SID_ALIGNBOTTOM: rReq.SetSlot( SID_V_ALIGNCELL ); rReq.AppendItem( SvxVerJustifyItem( !pVerJustify || (eVerJustify != SvxCellVerJustify::Bottom) ? SvxCellVerJustify::Bottom : SvxCellVerJustify::Standard, SID_V_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; case SID_ALIGNCENTERVER: rReq.SetSlot( SID_V_ALIGNCELL ); rReq.AppendItem( SvxVerJustifyItem( !pVerJustify || (eVerJustify != SvxCellVerJustify::Center) ? SvxCellVerJustify::Center : SvxCellVerJustify::Standard, SID_V_ALIGNCELL ) ); ExecuteSlot( rReq, GetInterface() ); return; default: break; } } rBindings.Update(); if( pNewSet ) { rReq.Done( *pNewSet ); pNewSet.reset(); } else { rReq.Done(); } } void ScFormatShell::ExecuteAttr( SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); SfxBindings& rBindings = rViewData.GetBindings(); const SfxItemSet* pNewAttrs = rReq.GetArgs(); sal_uInt16 nSlot = rReq.GetSlot(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox ScDocument& rDoc = GetViewData().GetDocument(); if ( !pNewAttrs ) { switch ( nSlot ) { case SID_GROW_FONT_SIZE: case SID_SHRINK_FONT_SIZE: { SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( SID_ATTR_CHAR_FONTHEIGHT, rPool ); aSetItem.GetItemSet().Put( pTabViewShell->GetSelectionPattern()->GetItemSet(), false ); SvtScriptType nScriptTypes = pTabViewShell->GetSelectionScriptType(); const SvxFontHeightItem* pSize( static_cast( aSetItem.GetItemOfScript( nScriptTypes ) ) ); if ( pSize ) { SvxFontHeightItem aSize( *pSize ); sal_uInt32 nSize = aSize.GetHeight(); const sal_uInt32 nFontInc = 40; // 2pt const sal_uInt32 nFontMaxSz = 19998; // 999.9pt if ( nSlot == SID_GROW_FONT_SIZE ) nSize = std::min< sal_uInt32 >( nSize + nFontInc, nFontMaxSz ); else nSize = std::max< sal_Int32 >( nSize - nFontInc, nFontInc ); aSize.SetHeight( nSize ); aSetItem.PutItemForScriptType( nScriptTypes, aSize ); pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); } rBindings.Invalidate( SID_ATTR_CHAR_FONTHEIGHT ); } break; case SID_ATTR_CHAR_ENDPREVIEW_FONT: { rDoc.SetPreviewFont(nullptr); pTabViewShell->UpdateSelectionArea( rDoc.GetPreviewSelection() ); break; } case SID_ATTR_CHAR_COLOR: case SID_ATTR_CHAR_FONT: case SID_ATTR_CHAR_FONTHEIGHT: pTabViewShell->ExecuteCellFormatDlg(rReq, u"font"_ustr); // when ToolBar is vertical break; case SID_BACKGROUND_COLOR: { SvxBrushItem aBrushItem( pTabViewShell->GetSelectionPattern()->GetItem( ATTR_BACKGROUND ) ); aBrushItem.SetColor( COL_TRANSPARENT ); pTabViewShell->ApplyAttr( aBrushItem, false ); } break; case SID_ATTR_ALIGN_LINEBREAK: // without parameter as toggle { const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern(); bool bOld = pAttrs->GetItem(ATTR_LINEBREAK).GetValue(); ScLineBreakCell aBreakItem(!bOld); pTabViewShell->ApplyAttr( aBreakItem ); SfxAllItemSet aNewSet( GetPool() ); aNewSet.Put( aBreakItem ); rReq.Done( aNewSet ); rBindings.Invalidate( nSlot ); } break; case SID_SCATTR_CELLPROTECTION: // without parameter as toggle { const ScPatternAttr* pAttrs = pTabViewShell->GetSelectionPattern(); bool bProtect = pAttrs->GetItem(ATTR_PROTECTION).GetProtection(); bool bHideFormula = pAttrs->GetItem(ATTR_PROTECTION).GetHideFormula(); bool bHideCell = pAttrs->GetItem(ATTR_PROTECTION).GetHideCell(); bool bHidePrint = pAttrs->GetItem(ATTR_PROTECTION).GetHidePrint(); ScProtectionAttr aProtectionItem( !bProtect, bHideFormula, bHideCell, bHidePrint ); pTabViewShell->ApplyAttr( aProtectionItem ); SfxAllItemSet aNewSet( GetPool() ); aNewSet.Put( aProtectionItem ); aNewSet.Put( SfxBoolItem( SID_SCATTR_CELLPROTECTION, !bProtect ) ); rReq.Done( aNewSet ); rBindings.Invalidate( nSlot ); } break; } } else { switch ( nSlot ) { case SID_ATTR_CHAR_PREVIEW_FONT: { SfxItemPool& rPool = GetPool(); sal_uInt16 nWhich = rPool.GetWhichIDFromSlotID( nSlot ); const SvxFontItem& rFont = static_cast(pNewAttrs->Get( nWhich )); SvxScriptSetItem aSetItem( SID_ATTR_CHAR_FONT, rPool ); SvtScriptType nScript = pTabViewShell->GetSelectionScriptType(); aSetItem.PutItemForScriptType( nScript, rFont ); ScMarkData aFuncMark( rViewData.GetMarkData() ); ScViewUtil::UnmarkFiltered( aFuncMark, rDoc ); rDoc.SetPreviewFont( aSetItem.GetItemSet().Clone() ); aFuncMark.MarkToMulti(); if ( !aFuncMark.IsMarked() && !aFuncMark.IsMultiMarked() ) { SCCOL nCol = rViewData.GetCurX(); SCROW nRow = rViewData.GetCurY(); SCTAB nTab = rViewData.GetTabNo(); ScRange aRange( nCol, nRow, nTab ); aFuncMark.SetMarkArea( aRange ); } rDoc.SetPreviewSelection( aFuncMark ); pTabViewShell->UpdateSelectionArea( aFuncMark ); break; } case SID_ATTR_CHAR_OVERLINE: case SID_ATTR_CHAR_STRIKEOUT: case SID_ATTR_ALIGN_LINEBREAK: case SID_ATTR_CHAR_CONTOUR: case SID_ATTR_CHAR_SHADOWED: case SID_ATTR_CHAR_RELIEF: pTabViewShell->ApplyAttr( pNewAttrs->Get( pNewAttrs->GetPool()->GetWhichIDFromSlotID( nSlot ) ) ); rBindings.Invalidate( nSlot ); rBindings.Update( nSlot ); break; case SID_ATTR_CHAR_COLOR: case SID_SCATTR_PROTECTION : { pTabViewShell->ApplyAttr( pNewAttrs->Get( pNewAttrs->GetPool()->GetWhichIDFromSlotID( nSlot) ), false); rBindings.Invalidate( nSlot ); rBindings.Update( nSlot ); } break; case SID_ATTR_CHAR_FONT: case SID_ATTR_CHAR_FONTHEIGHT: { // #i78017 establish the same behaviour as in Writer SvtScriptType nScript = SvtScriptType::LATIN | SvtScriptType::ASIAN | SvtScriptType::COMPLEX; if (nSlot == SID_ATTR_CHAR_FONT) nScript = pTabViewShell->GetSelectionScriptType(); SfxItemPool& rPool = GetPool(); SvxScriptSetItem aSetItem( nSlot, rPool ); sal_uInt16 nWhich = rPool.GetWhichIDFromSlotID( nSlot ); aSetItem.PutItemForScriptType( nScript, pNewAttrs->Get( nWhich ) ); pTabViewShell->ApplyUserItemSet( aSetItem.GetItemSet() ); rBindings.Invalidate( nSlot ); rBindings.Update( nSlot ); } break; case SID_FRAME_LINESTYLE: { // Update default line const ::editeng::SvxBorderLine* pLine = pNewAttrs->Get( SID_FRAME_LINESTYLE ). GetLine(); if ( pLine ) { ::editeng::SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine(); if ( pDefLine ) { pDefLine->SetBorderLineStyle( pLine->GetBorderLineStyle()); pDefLine->SetWidth( pLine->GetWidth( ) ); pTabViewShell->SetSelectionFrameLines( pDefLine, false ); } else { pTabViewShell->SetDefaultFrameLine( pLine ); pTabViewShell->GetDefaultFrameLine()->SetColor( COL_BLACK ); pTabViewShell->SetSelectionFrameLines( pLine, false ); } } else { Color aColorBlack( COL_BLACK ); ::editeng::SvxBorderLine aDefLine( &aColorBlack, 20, SvxBorderLineStyle::SOLID ); pTabViewShell->SetDefaultFrameLine( &aDefLine ); pTabViewShell->SetSelectionFrameLines( nullptr, false ); } } break; case SID_FRAME_LINECOLOR: { ::editeng::SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine(); Color aColor = pNewAttrs->Get( SID_FRAME_LINECOLOR ).GetValue(); // Update default line if ( pDefLine ) { pDefLine->SetColor( aColor ); pTabViewShell->SetSelectionFrameLines( pDefLine, true ); } else { ::editeng::SvxBorderLine aDefLine( &aColor, 20, SvxBorderLineStyle::SOLID ); pTabViewShell->SetDefaultFrameLine( &aDefLine ); pTabViewShell->SetSelectionFrameLines( &aDefLine, false ); } } break; case SID_ATTR_BORDER_OUTER: case SID_ATTR_BORDER: { ::editeng::SvxBorderLine* pDefLine = pTabViewShell->GetDefaultFrameLine(); const ScPatternAttr* pOldAttrs = pTabViewShell->GetSelectionPattern(); SfxItemSetFixed aOldSet( *rDoc.GetPool() ); SfxItemSetFixed aNewSet( *rDoc.GetPool() ); const SfxPoolItem& rBorderAttr = pOldAttrs->GetItemSet(). Get( ATTR_BORDER ); // Evaluate border items from controller: if ( const SvxBoxItem* pBoxItem = pNewAttrs->GetItemIfSet( ATTR_BORDER ) ) { // The SvxFrameToolBoxControl toolbox controller uses a default // SvxBorderLine (all widths 0) to mark the lines that should be set. // Macro recording uses a SvxBoxItem with the real values (OutWidth > 0) // or NULL pointers for no lines. // -> Substitute existing lines with pDefLine only if widths are 0. SvxBoxItem aBoxItem ( *pBoxItem ); if ( aBoxItem.GetTop() && aBoxItem.GetTop()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, SvxBoxItemLine::TOP ); if ( aBoxItem.GetBottom() && aBoxItem.GetBottom()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, SvxBoxItemLine::BOTTOM ); if ( aBoxItem.GetLeft() && aBoxItem.GetLeft()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, SvxBoxItemLine::LEFT ); if ( aBoxItem.GetRight() && aBoxItem.GetRight()->GetOutWidth() == 0 ) aBoxItem.SetLine( pDefLine, SvxBoxItemLine::RIGHT ); aNewSet.Put( aBoxItem ); rReq.AppendItem( aBoxItem ); } if ( const SvxBoxInfoItem* pBoxInfoItem = pNewAttrs->GetItemIfSet( ATTR_BORDER_INNER ) ) { SvxBoxInfoItem aBoxInfoItem( *pBoxInfoItem ); if ( aBoxInfoItem.GetHori() && aBoxInfoItem.GetHori()->GetOutWidth() == 0 ) aBoxInfoItem.SetLine( pDefLine, SvxBoxInfoItemLine::HORI ); if ( aBoxInfoItem.GetVert() && aBoxInfoItem.GetVert()->GetOutWidth() == 0 ) aBoxInfoItem.SetLine( pDefLine, SvxBoxInfoItemLine::VERT ); aNewSet.Put( aBoxInfoItem ); rReq.AppendItem( aBoxInfoItem ); } else { SvxBoxInfoItem aBoxInfoItem( ATTR_BORDER_INNER ); aBoxInfoItem.SetLine( nullptr, SvxBoxInfoItemLine::HORI ); aBoxInfoItem.SetLine( nullptr, SvxBoxInfoItemLine::VERT ); aNewSet.Put( aBoxInfoItem ); } aOldSet.Put( rBorderAttr ); pTabViewShell->ApplyAttributes( aNewSet, aOldSet ); } break; case SID_ATTR_BORDER_DIAG_TLBR: case SID_ATTR_BORDER_DIAG_BLTR: { const ScPatternAttr* pOldAttrs = pTabViewShell->GetSelectionPattern(); SfxItemSet aOldSet(pOldAttrs->GetItemSet()); SfxItemSet aNewSet(aOldSet); if(SID_ATTR_BORDER_DIAG_TLBR == nSlot) { if(SfxItemState::SET == pNewAttrs->GetItemState(ATTR_BORDER_TLBR)) { SvxLineItem aItem(ATTR_BORDER_TLBR); aItem.SetLine(pNewAttrs->Get(ATTR_BORDER_TLBR).GetLine()); aNewSet.Put(aItem); rReq.AppendItem(aItem); pTabViewShell->ApplyAttributes(aNewSet, aOldSet); } } else // if( nSlot == SID_ATTR_BORDER_DIAG_BLTR ) { if(SfxItemState::SET == pNewAttrs->GetItemState(ATTR_BORDER_BLTR )) { SvxLineItem aItem(ATTR_BORDER_BLTR); aItem.SetLine(pNewAttrs->Get(ATTR_BORDER_BLTR).GetLine()); aNewSet.Put(aItem); rReq.AppendItem(aItem); pTabViewShell->ApplyAttributes(aNewSet, aOldSet); } } rBindings.Invalidate(nSlot); } break; // ATTR_BACKGROUND (=SID_ATTR_BRUSH) has to be set to two IDs: case SID_BACKGROUND_COLOR: { const SvxColorItem& rNewColorItem = pNewAttrs->Get( SID_BACKGROUND_COLOR ); Color aColor = rNewColorItem.GetValue(); SvxBrushItem aBrushItem( pTabViewShell->GetSelectionPattern()->GetItem( ATTR_BACKGROUND ) ); aBrushItem.SetColor(aColor); aBrushItem.setComplexColor(rNewColorItem.getComplexColor()); pTabViewShell->ApplyAttr( aBrushItem, false ); } break; case SID_ATTR_BRUSH: { SvxBrushItem aBrushItem( pTabViewShell->GetSelectionPattern()-> GetItem( ATTR_BACKGROUND ) ); const SvxBrushItem& rNewBrushItem = static_cast( pNewAttrs->Get( GetPool().GetWhichIDFromSlotID(nSlot) ) ); aBrushItem.SetColor(rNewBrushItem.GetColor()); aBrushItem.setComplexColor(rNewBrushItem.getComplexColor()); pTabViewShell->ApplyAttr( aBrushItem ); } break; case SID_ATTR_BORDER_SHADOW: { const SvxShadowItem& rNewShadowItem = pNewAttrs->Get( ATTR_SHADOW ); pTabViewShell->ApplyAttr( rNewShadowItem ); } break; default: break; } if( ! rReq.IsAPI() && ! rReq.IsDone() ) rReq.Done(); } } void ScFormatShell::GetAttrState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); const SvxBrushItem& rBrushItem = rAttrSet.Get( ATTR_BACKGROUND ); SfxWhichIter aIter( rSet ); sal_uInt16 nWhich = aIter.FirstWhich(); rSet.Put( rAttrSet, false ); // choose font info according to selection script type SvtScriptType nScript = SvtScriptType::NONE; // GetSelectionScriptType never returns 0 if ( rSet.GetItemState( ATTR_FONT ) != SfxItemState::UNKNOWN ) { nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT, nScript ); } if ( rSet.GetItemState( ATTR_FONT_HEIGHT ) != SfxItemState::UNKNOWN ) { if (nScript == SvtScriptType::NONE) nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_HEIGHT, nScript ); } while ( nWhich ) { switch(nWhich) { case SID_BACKGROUND_COLOR: { rSet.Put( SvxColorItem( rBrushItem.GetColor(), SID_BACKGROUND_COLOR ) ); if(SfxItemState::INVALID == rAttrSet.GetItemState(ATTR_BACKGROUND)) { rSet.InvalidateItem(SID_BACKGROUND_COLOR); } } break; case SID_FRAME_LINESTYLE: case SID_FRAME_LINECOLOR: { // handled together because both need the cell border information for decisions Color aCol; editeng::SvxBorderLine aLine(nullptr,0,SvxBorderLineStyle::SOLID); bool bCol = false; bool bColDisable = false, bStyleDisable = false; std::shared_ptr aBoxItem(std::make_shared(ATTR_BORDER)); std::shared_ptr aInfoItem(std::make_shared(ATTR_BORDER_INNER)); pTabViewShell->GetSelectionFrame(aBoxItem, aInfoItem); if( aBoxItem->GetTop() ) { bCol = true; aCol = aBoxItem->GetTop()->GetColor() ; aLine.SetColor(aCol); aLine.SetWidth( aBoxItem->GetTop()->GetWidth()); aLine.SetBorderLineStyle( aBoxItem->GetTop()->GetBorderLineStyle()); } if( aBoxItem->GetBottom() ) { if(!bCol) { bCol = true; aCol = aBoxItem->GetBottom()->GetColor() ; aLine.SetColor(aCol); aLine.SetWidth( aBoxItem->GetBottom()->GetWidth()); aLine.SetBorderLineStyle( aBoxItem->GetBottom()->GetBorderLineStyle()); } else { if(aCol != aBoxItem->GetBottom()->GetColor() ) bColDisable = true; if( aLine != *aBoxItem->GetBottom() ) bStyleDisable = true; } } if( aBoxItem->GetLeft() ) { if(!bCol) { bCol = true; aCol = aBoxItem->GetLeft()->GetColor() ; aLine.SetColor(aCol); aLine.SetWidth( aBoxItem->GetLeft()->GetWidth()); aLine.SetBorderLineStyle( aBoxItem->GetLeft()->GetBorderLineStyle()); } else { if(aCol != aBoxItem->GetLeft()->GetColor() ) bColDisable = true; if( aLine != *aBoxItem->GetLeft() ) bStyleDisable = true; } } if( aBoxItem->GetRight() ) { if(!bCol) { bCol = true; aCol = aBoxItem->GetRight()->GetColor() ; aLine.SetColor(aCol); aLine.SetWidth( aBoxItem->GetRight()->GetWidth()); aLine.SetBorderLineStyle( aBoxItem->GetRight()->GetBorderLineStyle()); } else { if(aCol != aBoxItem->GetRight()->GetColor() ) bColDisable = true; if( aLine != *aBoxItem->GetRight() ) bStyleDisable = true; } } if( aInfoItem->GetVert()) { if(!bCol) { bCol = true; aCol = aInfoItem->GetVert()->GetColor() ; aLine.SetColor(aCol); aLine.SetWidth( aInfoItem->GetVert()->GetWidth()); aLine.SetBorderLineStyle( aInfoItem->GetVert()->GetBorderLineStyle()); } else { if(aCol != aInfoItem->GetVert()->GetColor() ) bColDisable = true; if( aLine != *aInfoItem->GetVert() ) bStyleDisable = true; } } if( aInfoItem->GetHori()) { if(!bCol) { bCol = true; aCol = aInfoItem->GetHori()->GetColor() ; aLine.SetColor(aCol); aLine.SetWidth( aInfoItem->GetHori()->GetWidth()); aLine.SetBorderLineStyle( aInfoItem->GetHori()->GetBorderLineStyle()); } else { if(aCol != aInfoItem->GetHori()->GetColor() ) bColDisable = true; if( aLine != *aInfoItem->GetHori() ) bStyleDisable = true; } } if( !aInfoItem->IsValid( SvxBoxInfoItemValidFlags::VERT ) || !aInfoItem->IsValid( SvxBoxInfoItemValidFlags::HORI ) || !aInfoItem->IsValid( SvxBoxInfoItemValidFlags::LEFT ) || !aInfoItem->IsValid( SvxBoxInfoItemValidFlags::RIGHT ) || !aInfoItem->IsValid( SvxBoxInfoItemValidFlags::TOP ) || !aInfoItem->IsValid( SvxBoxInfoItemValidFlags::BOTTOM ) ) { bColDisable = true; bStyleDisable = true; } if(SID_FRAME_LINECOLOR == nWhich) { if(bColDisable) // if different lines have different colors { aCol = COL_TRANSPARENT; rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) ); rSet.InvalidateItem(SID_FRAME_LINECOLOR); } else if (!bCol) // if no line available { aCol = COL_AUTO; rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) ); } else rSet.Put( SvxColorItem(aCol, SID_FRAME_LINECOLOR ) ); } else // if( nWhich == SID_FRAME_LINESTYLE) { if(bStyleDisable) // if have several lines but don't have same style { aLine.SetWidth( 1 ); SvxLineItem aItem(SID_FRAME_LINESTYLE); aItem.SetLine(&aLine); rSet.Put( aItem ); rSet.InvalidateItem(SID_FRAME_LINESTYLE); } else // all the lines have same style or no line available, use initial value (0,0,0,0) { SvxLineItem aItem(SID_FRAME_LINESTYLE); aItem.SetLine(&aLine); rSet.Put( aItem ); } } } break; case SID_ATTR_BRUSH: { rSet.Put( rBrushItem.CloneSetWhich(GetPool().GetWhichIDFromSlotID(nWhich)) ); } break; case SID_SCATTR_CELLPROTECTION: { bool bProtect = rAttrSet.Get( ATTR_PROTECTION ).GetProtection(); rSet.Put( SfxBoolItem(SID_SCATTR_CELLPROTECTION, bProtect) ); } break; } nWhich = aIter.NextWhich(); } // stuff for sidebar panels Invalidate(SID_ATTR_ALIGN_DEGREES); Invalidate(SID_ATTR_ALIGN_LOCKPOS); Invalidate(SID_ATTR_ALIGN_STACKED); } void ScFormatShell::GetTextAttrState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); rSet.Put( rAttrSet, false ); // Include ItemStates in copy // choose font info according to selection script type SvtScriptType nScript = SvtScriptType::NONE; // GetSelectionScriptType never returns 0 if ( rSet.GetItemState( ATTR_FONT_WEIGHT ) != SfxItemState::UNKNOWN ) { nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_WEIGHT, nScript ); } if ( rSet.GetItemState( ATTR_FONT_POSTURE ) != SfxItemState::UNKNOWN ) { if (nScript == SvtScriptType::NONE) nScript = pTabViewShell->GetSelectionScriptType(); ScViewUtil::PutItemScript( rSet, rAttrSet, ATTR_FONT_POSTURE, nScript ); } SfxItemState eState; // own control on radio button functionality: // underline eState = rAttrSet.GetItemState( ATTR_FONT_UNDERLINE ); if ( eState == SfxItemState::INVALID ) { rSet.InvalidateItem( SID_ULINE_VAL_NONE ); rSet.InvalidateItem( SID_ULINE_VAL_SINGLE ); rSet.InvalidateItem( SID_ULINE_VAL_DOUBLE ); rSet.InvalidateItem( SID_ULINE_VAL_DOTTED ); } else { FontLineStyle eUnderline = rAttrSet.Get(ATTR_FONT_UNDERLINE).GetLineStyle(); rSet.Put(SfxBoolItem(SID_ULINE_VAL_SINGLE, eUnderline == LINESTYLE_SINGLE)); rSet.Put(SfxBoolItem(SID_ULINE_VAL_DOUBLE, eUnderline == LINESTYLE_DOUBLE)); rSet.Put(SfxBoolItem(SID_ULINE_VAL_DOTTED, eUnderline == LINESTYLE_DOTTED)); rSet.Put(SfxBoolItem(SID_ULINE_VAL_NONE, eUnderline == LINESTYLE_NONE)); } // horizontal alignment const SvxHorJustifyItem* pHorJustify = nullptr; const SvxVerJustifyItem* pVerJustify = nullptr; SvxCellVerJustify eVerJustify = SvxCellVerJustify::Standard; sal_uInt16 nWhich = 0; bool bJustifyStd = false; SfxBoolItem aBoolItem ( 0, true ); eState = rAttrSet.GetItemState( ATTR_HOR_JUSTIFY, true, reinterpret_cast(&pHorJustify) ); switch ( eState ) { case SfxItemState::SET: { switch ( pHorJustify->GetValue() ) { case SvxCellHorJustify::Standard: break; case SvxCellHorJustify::Left: nWhich = SID_ALIGNLEFT; break; case SvxCellHorJustify::Right: nWhich = SID_ALIGNRIGHT; break; case SvxCellHorJustify::Center: nWhich = SID_ALIGNCENTERHOR; break; case SvxCellHorJustify::Block: nWhich = SID_ALIGNBLOCK; break; case SvxCellHorJustify::Repeat: default: bJustifyStd = true; break; } } break; case SfxItemState::INVALID: rSet.InvalidateItem( SID_ALIGNLEFT ); rSet.InvalidateItem( SID_ALIGNRIGHT ); rSet.InvalidateItem( SID_ALIGNCENTERHOR ); rSet.InvalidateItem( SID_ALIGNBLOCK ); break; default: bJustifyStd = true; break; } if ( nWhich ) { aBoolItem.SetWhich( nWhich ); rSet.Put( aBoolItem ); } else if ( bJustifyStd ) { aBoolItem.SetValue( false ); aBoolItem.SetWhich( SID_ALIGNLEFT ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNRIGHT ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNCENTERHOR ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNBLOCK ); rSet.Put( aBoolItem ); bJustifyStd = false; } // vertical alignment nWhich = 0; aBoolItem.SetValue( true ); eState = rAttrSet.GetItemState( ATTR_VER_JUSTIFY, true, reinterpret_cast(&pVerJustify) ); switch ( eState ) { case SfxItemState::SET: { eVerJustify = pVerJustify->GetValue(); switch ( eVerJustify ) { case SvxCellVerJustify::Top: nWhich = SID_ALIGNTOP; break; case SvxCellVerJustify::Bottom: nWhich = SID_ALIGNBOTTOM; break; case SvxCellVerJustify::Center: nWhich = SID_ALIGNCENTERVER; break; case SvxCellVerJustify::Standard: default: bJustifyStd = true; break; } } break; case SfxItemState::INVALID: rSet.InvalidateItem( SID_ALIGNTOP ); rSet.InvalidateItem( SID_ALIGNBOTTOM ); rSet.InvalidateItem( SID_ALIGNCENTERVER ); break; default: bJustifyStd = true; break; } if ( nWhich ) { aBoolItem.SetWhich( nWhich ); rSet.Put( aBoolItem ); } else if ( bJustifyStd ) { aBoolItem.SetValue( false ); aBoolItem.SetWhich( SID_ALIGNTOP ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNBOTTOM ); rSet.Put( aBoolItem ); aBoolItem.SetWhich( SID_ALIGNCENTERVER ); rSet.Put( aBoolItem ); } } void ScFormatShell::GetBorderState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); std::shared_ptr aBoxItem(std::make_shared(ATTR_BORDER)); std::shared_ptr aInfoItem(std::make_shared(ATTR_BORDER_INNER)); pTabViewShell->GetSelectionFrame( aBoxItem, aInfoItem ); if ( rSet.GetItemState( ATTR_BORDER ) != SfxItemState::UNKNOWN ) rSet.Put( *aBoxItem ); if ( rSet.GetItemState( ATTR_BORDER_INNER ) != SfxItemState::UNKNOWN ) rSet.Put( *aInfoItem ); } void ScFormatShell::GetAlignState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); SfxWhichIter aIter(rSet); sal_uInt16 nWhich = aIter.FirstWhich(); SvxCellHorJustify eHAlign = SvxCellHorJustify::Standard; bool bHasHAlign = rAttrSet.GetItemState( ATTR_HOR_JUSTIFY ) != SfxItemState::INVALID; if( bHasHAlign ) eHAlign = rAttrSet.Get( ATTR_HOR_JUSTIFY ).GetValue(); SvxCellVerJustify eVAlign = SvxCellVerJustify::Standard; bool bHasVAlign = rAttrSet.GetItemState( ATTR_VER_JUSTIFY ) != SfxItemState::INVALID; if( bHasVAlign ) eVAlign = rAttrSet.Get( ATTR_VER_JUSTIFY ).GetValue(); while ( nWhich ) { switch ( nWhich ) { case SID_H_ALIGNCELL: if ( bHasHAlign ) rSet.Put( SvxHorJustifyItem( eHAlign, nWhich )); break; case SID_V_ALIGNCELL: if ( bHasVAlign ) rSet.Put( SvxVerJustifyItem( eVAlign, nWhich )); break; // pseudo slots for Format menu case SID_ALIGN_ANY_HDEFAULT: case SID_ALIGN_ANY_LEFT: case SID_ALIGN_ANY_HCENTER: case SID_ALIGN_ANY_RIGHT: case SID_ALIGN_ANY_JUSTIFIED: rSet.Put( SfxBoolItem( nWhich, bHasHAlign && (eHAlign == lclConvertSlotToHAlign( nWhich )) ) ); break; case SID_ALIGN_ANY_VDEFAULT: case SID_ALIGN_ANY_TOP: case SID_ALIGN_ANY_VCENTER: case SID_ALIGN_ANY_BOTTOM: rSet.Put( SfxBoolItem( nWhich, bHasVAlign && (eVAlign == lclConvertSlotToVAlign( nWhich )) ) ); break; } nWhich = aIter.NextWhich(); } } void ScFormatShell::GetNumFormatState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); ScDocument& rDoc = rViewData.GetDocument(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); const SfxItemState eItemState = rAttrSet.GetItemState( ATTR_VALUE_FORMAT ); sal_uInt32 nNumberFormat = rAttrSet.Get(ATTR_VALUE_FORMAT).GetValue(); SvNumberFormatter* pFormatter = rDoc.GetFormatTable(); // If item state is default or set it // indicates one number format so we // don't have to iterate over all // selected cells' attribute ranges to // determine selected types. // Does *NOT* include the // SvNumFormatType::DEFINED bit. const SvNumFormatType nType = (eItemState >= SfxItemState::DEFAULT ? pFormatter->GetType( nNumberFormat) : GetCurrentNumberFormatType()); NfIndexTableOffset nOffset = SvNumberFormatter::GetIndexTableOffset(nNumberFormat); SfxWhichIter aIter(rSet); sal_uInt16 nWhich = aIter.FirstWhich(); while ( nWhich ) { switch ( nWhich ) { case SID_NUMBER_THOUSANDS: { bool bEnable = (SfxItemState::INVALID != eItemState); if (bEnable) { bEnable = ((nType != SvNumFormatType::ALL) && (nType & (SvNumFormatType::NUMBER | SvNumFormatType::PERCENT | SvNumFormatType::CURRENCY | SvNumFormatType::FRACTION))); if (bEnable) { bool bThousand( false ); bool bNegRed( false ); sal_uInt16 nPrecision( 0 ); sal_uInt16 nLeadZeroes( 0 ); pFormatter->GetFormatSpecialInfo( nNumberFormat, bThousand, bNegRed, nPrecision, nLeadZeroes); rSet.Put( SfxBoolItem( nWhich, bThousand)); } } if (!bEnable) { rSet.DisableItem( nWhich ); } } break; case SID_NUMBER_FORMAT: // symphony version with format interpretation { if(SfxItemState::INVALID != eItemState) { bool bThousand(false); bool bNegRed(false); sal_uInt16 nPrecision(0); sal_uInt16 nLeadZeroes(0); pFormatter->GetFormatSpecialInfo(nNumberFormat,bThousand, bNegRed, nPrecision, nLeadZeroes); const SvNumberformat* pFormatEntry = pFormatter->GetEntry( nNumberFormat ); if (pFormatEntry && (pFormatEntry->GetType() & SvNumFormatType::SCIENTIFIC)) { // if scientific, bThousand is used for engineering notation const sal_uInt16 nIntegerDigits = pFormatEntry->GetFormatIntegerDigits(); bThousand = nIntegerDigits > 0 && ((nIntegerDigits % 3) == 0); } OUString aFormat; static constexpr OUString sBreak = u","_ustr; const OUString sThousand = OUString::number(static_cast(bThousand)); const OUString sNegRed = OUString::number(static_cast(bNegRed)); const OUString sPrecision = OUString::number(nPrecision); const OUString sLeadZeroes = OUString::number(nLeadZeroes); const OUString sNatNum12 = OUString::number( static_cast< sal_Int32 >( pFormatter->IsNatNum12( nNumberFormat ) ) ); aFormat += sThousand + sBreak + sNegRed + sBreak + sPrecision + sBreak + sLeadZeroes + sBreak + sNatNum12 + sBreak; rSet.Put(SfxStringItem(nWhich, aFormat)); if (comphelper::LibreOfficeKit::isActive()) { OUString sPayload = ".uno:NumberFormat=" + aFormat; GetViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED, OUStringToOString(sPayload, RTL_TEXTENCODING_ASCII_US)); } } else { rSet.InvalidateItem( nWhich ); } } break; case SID_NUMBER_TYPE_FORMAT: { sal_Int16 nFormatCategory = -1; if ( eItemState >= SfxItemState::DEFAULT ) //Modify for more robust { switch(nType) { case SvNumFormatType::NUMBER: // Determine if General format. if ((nNumberFormat % SV_COUNTRY_LANGUAGE_OFFSET) == 0) nFormatCategory = 0; else nFormatCategory = 1; break; case SvNumFormatType::PERCENT: nFormatCategory = 2; break; case SvNumFormatType::CURRENCY: nFormatCategory = 3; break; case SvNumFormatType::DATE: //Add case SvNumFormatType::DATETIME: nFormatCategory = 4; break; case SvNumFormatType::TIME: nFormatCategory = 5; break; case SvNumFormatType::SCIENTIFIC: nFormatCategory = 6; break; case SvNumFormatType::FRACTION: nFormatCategory = 7; break; case SvNumFormatType::LOGICAL: nFormatCategory = 8; break; case SvNumFormatType::TEXT: nFormatCategory = 9; break; default: nFormatCategory = -1; //for more robust } if( nFormatCategory == -1 ) rSet.InvalidateItem( nWhich ); else rSet.Put( SfxUInt16Item( nWhich, nFormatCategory ) ); } else { rSet.InvalidateItem( nWhich ); } } break; case SID_NUMBER_CURRENCY: rSet.Put( SfxBoolItem(nWhich, bool(nType & SvNumFormatType::CURRENCY)) ); break; case SID_NUMBER_SCIENTIFIC: rSet.Put( SfxBoolItem(nWhich, bool(nType & SvNumFormatType::SCIENTIFIC)) ); break; case SID_NUMBER_DATE: rSet.Put( SfxBoolItem(nWhich, bool(nType & SvNumFormatType::DATE)) ); break; case SID_NUMBER_PERCENT: rSet.Put( SfxBoolItem(nWhich, bool(nType & SvNumFormatType::PERCENT)) ); break; case SID_NUMBER_TIME: rSet.Put( SfxBoolItem(nWhich, bool(nType & SvNumFormatType::TIME)) ); break; case SID_NUMBER_TWODEC: rSet.Put( SfxBoolItem(nWhich, (nType & SvNumFormatType::NUMBER) && nOffset == NF_NUMBER_1000DEC2 ) ); break; case SID_NUMBER_STANDARD: rSet.Put( SfxBoolItem(nWhich, (nType & SvNumFormatType::NUMBER) && (nNumberFormat % SV_COUNTRY_LANGUAGE_OFFSET) == 0) ); break; } nWhich = aIter.NextWhich(); } } void ScFormatShell::ExecuteTextDirection( const SfxRequest& rReq ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); pTabViewShell->HideListBox(); // Autofilter-DropDown-Listbox bool bEditMode = false; if ( GetViewData().HasEditView( GetViewData().GetActivePart() ) ) { bEditMode=true; SC_MOD()->InputEnterHandler(); pTabViewShell->UpdateInputHandler(); } sal_uInt16 nSlot = rReq.GetSlot(); switch( nSlot ) { case SID_TEXTDIRECTION_LEFT_TO_RIGHT: case SID_TEXTDIRECTION_TOP_TO_BOTTOM: { bool bVert = (nSlot == SID_TEXTDIRECTION_TOP_TO_BOTTOM); ScPatternAttr aAttr(GetViewData().GetDocument().getCellAttributeHelper()); SfxItemSet& rItemSet = aAttr.GetItemSet(); rItemSet.Put( ScVerticalStackCell( bVert ) ); rItemSet.Put( SfxBoolItem( ATTR_VERTICAL_ASIAN, bVert ) ); pTabViewShell->ApplySelectionPattern( aAttr ); pTabViewShell->AdjustBlockHeight(); } break; case SID_ATTR_PARA_LEFT_TO_RIGHT: case SID_ATTR_PARA_RIGHT_TO_LEFT: { SvxFrameDirection eDirection = ( nSlot == SID_ATTR_PARA_LEFT_TO_RIGHT ) ? SvxFrameDirection::Horizontal_LR_TB : SvxFrameDirection::Horizontal_RL_TB; pTabViewShell->ApplyAttr( SvxFrameDirectionItem( eDirection, ATTR_WRITINGDIR ) ); } break; } if (bEditMode) SC_MOD()->SetInputMode( SC_INPUT_TABLE ); } void ScFormatShell::GetTextDirectionState( SfxItemSet& rSet ) { ScTabViewShell* pTabViewShell = GetViewData().GetViewShell(); const SfxItemSet& rAttrSet = pTabViewShell->GetSelectionPattern()->GetItemSet(); bool bVertDontCare = (rAttrSet.GetItemState( ATTR_VERTICAL_ASIAN ) == SfxItemState::INVALID) || (rAttrSet.GetItemState( ATTR_STACKED ) == SfxItemState::INVALID); bool bLeftRight = !bVertDontCare && !rAttrSet.Get( ATTR_STACKED ).GetValue(); bool bTopBottom = !bVertDontCare && !bLeftRight && rAttrSet.Get( ATTR_VERTICAL_ASIAN ).GetValue(); bool bBidiDontCare = (rAttrSet.GetItemState( ATTR_WRITINGDIR ) == SfxItemState::INVALID); EEHorizontalTextDirection eBidiDir = EEHorizontalTextDirection::Default; if ( !bBidiDontCare ) { SvxFrameDirection eCellDir = rAttrSet.Get( ATTR_WRITINGDIR ).GetValue(); if ( eCellDir == SvxFrameDirection::Environment ) eBidiDir = GetViewData().GetDocument(). GetEditTextDirection( GetViewData().GetTabNo() ); else if ( eCellDir == SvxFrameDirection::Horizontal_RL_TB ) eBidiDir = EEHorizontalTextDirection::R2L; else eBidiDir = EEHorizontalTextDirection::L2R; } bool bDisableCTLFont = !SvtCTLOptions::IsCTLFontEnabled(); bool bDisableVerticalText = !SvtCJKOptions::IsVerticalTextEnabled(); SfxWhichIter aIter( rSet ); sal_uInt16 nWhich = aIter.FirstWhich(); while( nWhich ) { switch( nWhich ) { case SID_TEXTDIRECTION_LEFT_TO_RIGHT: case SID_TEXTDIRECTION_TOP_TO_BOTTOM: if ( bDisableVerticalText ) rSet.DisableItem( nWhich ); else { if( bVertDontCare ) rSet.InvalidateItem( nWhich ); else if ( nWhich == SID_TEXTDIRECTION_LEFT_TO_RIGHT ) rSet.Put( SfxBoolItem( nWhich, bLeftRight ) ); else rSet.Put( SfxBoolItem( nWhich, bTopBottom ) ); } break; case SID_ATTR_PARA_LEFT_TO_RIGHT: case SID_ATTR_PARA_RIGHT_TO_LEFT: if ( bDisableCTLFont ) rSet.DisableItem( nWhich ); else { if ( bTopBottom ) rSet.DisableItem( nWhich ); else if ( bBidiDontCare ) rSet.InvalidateItem( nWhich ); else if ( nWhich == SID_ATTR_PARA_LEFT_TO_RIGHT ) rSet.Put( SfxBoolItem( nWhich, eBidiDir == EEHorizontalTextDirection::L2R ) ); else rSet.Put( SfxBoolItem( nWhich, eBidiDir == EEHorizontalTextDirection::R2L ) ); } } nWhich = aIter.NextWhich(); } } void ScFormatShell::ExecFormatPaintbrush( const SfxRequest& rReq ) { ScViewFunc* pView = rViewData.GetView(); if ( pView->HasPaintBrush() ) { // cancel paintbrush mode pView->ResetBrushDocument(); } else { bool bLock = false; const SfxItemSet *pArgs = rReq.GetArgs(); if( pArgs && pArgs->Count() >= 1 ) bLock = pArgs->Get(SID_FORMATPAINTBRUSH).GetValue(); // in case of multi selection, deselect all and use the cursor position ScRange aDummy; if ( rViewData.GetSimpleArea(aDummy) != SC_MARK_SIMPLE ) pView->Unmark(); ScDocumentUniquePtr pBrushDoc(new ScDocument( SCDOCMODE_CLIP )); pView->CopyToClip( pBrushDoc.get(), false, true ); pView->SetBrushDocument( std::move(pBrushDoc), bLock ); } } void ScFormatShell::StateFormatPaintbrush( SfxItemSet& rSet ) { if ( rViewData.HasEditView( rViewData.GetActivePart() ) ) rSet.DisableItem( SID_FORMATPAINTBRUSH ); else rSet.Put( SfxBoolItem( SID_FORMATPAINTBRUSH, rViewData.GetView()->HasPaintBrush() ) ); } SvNumFormatType ScFormatShell::GetCurrentNumberFormatType() { SvNumFormatType nType = SvNumFormatType::ALL; ScDocument& rDoc = GetViewData().GetDocument(); ScMarkData aMark(GetViewData().GetMarkData()); const SvNumberFormatter* pFormatter = rDoc.GetFormatTable(); if (!pFormatter) return nType; // TODO: Find out how to get a selected table range in case multiple tables // are selected. Currently we only check for the current active table. if ( aMark.IsMarked() || aMark.IsMultiMarked() ) { aMark.MarkToMulti(); const ScRange& aRange = aMark.GetMultiMarkArea(); const ScMultiSel& rMultiSel = aMark.GetMultiSelData(); SvNumFormatType nComboType = SvNumFormatType::ALL; bool bFirstItem = true; for (SCCOL nCol = aRange.aStart.Col(); nCol <= aRange.aEnd.Col(); ++nCol) { if (!rMultiSel.HasMarks(nCol)) continue; SCROW nRow1, nRow2; ScMultiSelIter aMultiIter(rMultiSel, nCol); while (aMultiIter.Next(nRow1, nRow2)) { ScRange aColRange(nCol, nRow1, aRange.aStart.Tab()); aColRange.aEnd.SetRow(nRow2); sal_uInt32 nNumFmt = rDoc.GetNumberFormat(aColRange); SvNumFormatType nThisType = pFormatter->GetType(nNumFmt); if (bFirstItem) { bFirstItem = false; nComboType = nThisType; } else if (nComboType != nThisType) // mixed number format type. return SvNumFormatType::ALL; } } nType = nComboType; } else { sal_uInt32 nNumFmt = rDoc.GetNumberFormat( rViewData.GetCurX(), rViewData.GetCurY(), rViewData.GetTabNo()); nType = pFormatter->GetType( nNumFmt ); } return nType; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */