/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #ifndef INCLUDED_VCL_PDFWRITER_HXX #define INCLUDED_VCL_PDFWRITER_HXX #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include namespace vcl { class Font; } class Point; class OutputDevice; class GDIMetaFile; class MapMode; class Polygon; class LineInfo; class PolyPolygon; class Bitmap; class BitmapEx; class Image; class Gradient; class Hatch; class Wallpaper; namespace vcl { class PDFExtOutDevData; class PDFWriterImpl; struct PDFNote { OUString Title; // optional title for the popup containing the note OUString Contents; // contents of the note }; class VCL_DLLPUBLIC PDFOutputStream { public: virtual ~PDFOutputStream(); virtual void write( const com::sun::star::uno::Reference< com::sun::star::io::XOutputStream >& xStream ) = 0; }; class VCL_DLLPUBLIC PDFWriter { boost::scoped_ptr pImplementation; public: // extended line info enum CapType { capButt, capRound, capSquare }; enum JoinType { joinMiter, joinRound, joinBevel }; struct ExtLineInfo { double m_fLineWidth; double m_fTransparency; CapType m_eCap; JoinType m_eJoin; double m_fMiterLimit; std::vector< double > m_aDashArray; ExtLineInfo() : m_fLineWidth( 0.0 ), m_fTransparency( 0.0 ), m_eCap( capButt ), m_eJoin( joinMiter ), m_fMiterLimit( 10.0 ) {} }; enum Orientation { Portrait, Landscape, Seascape, Inherit }; // in case the below enum is added PDF_1_6 PDF_1_7, please add them just after PDF_1_5 enum PDFVersion { PDF_1_2, PDF_1_3, PDF_1_4, PDF_1_5, PDF_A_1 };//i59651, PDF/A-1b & -1a, only -1b implemented for now // for the meaning of DestAreaType please look at PDF Reference Manual // version 1.4 section 8.2.1, page 475 enum DestAreaType { XYZ, Fit, FitHorizontal, FitVertical, FitRectangle, FitPageBoundingBox, FitPageBoundingBoxHorizontal, FitPageBoundingBoxVertical }; // for a definition of structural element types please refer to // PDF Reference, 3rd ed. section 9.7.4 enum StructElement { // special element to place outside the structure hierarchy NonStructElement, // Grouping elements Document, Part, Article, Section, Division, BlockQuote, Caption, TOC, TOCI, Index, // block level elements Paragraph, Heading, H1, H2, H3, H4, H5, H6, List, ListItem, LILabel, LIBody, Table, TableRow, TableHeader, TableData, // inline level elements Span, Quote, Note, Reference, BibEntry, Code, Link, // illustration elements Figure, Formula, Form }; enum StructAttribute { Placement, WritingMode, SpaceBefore, SpaceAfter, StartIndent, EndIndent, TextIndent, TextAlign, Width, Height, BlockAlign, InlineAlign, LineHeight, BaselineShift, TextDecorationType, ListNumbering, RowSpan, ColSpan, // link destination is an artificial attribute that sets // the link annotation ID of a Link element // further note: since structure attributes can only be // set during content creation, but links can be // created after the fact, it is possible to set // an arbitrary id as structure attribute here. In this // case the arbitrary id has to be passed again when the // actual link annotation is created via SetLinkPropertyID LinkAnnotation, // Language currently sets a LanguageType (see i18nlangtag/lang.h) // which will be internally changed to a corresponding locale Language }; enum StructAttributeValue { Invalid, NONE, // Placement Block, Inline, Before, After, Start, End, // WritingMode LrTb, RlTb, TbRl, // TextAlign Center, Justify, // Width, Height, Auto, // BlockAlign Middle, // LineHeight Normal, // TextDecorationType Underline, Overline, LineThrough, // ListNumbering Disc, Circle, Square, Decimal, UpperRoman, LowerRoman, UpperAlpha, LowerAlpha }; enum PageTransition { Regular, SplitHorizontalInward, SplitHorizontalOutward, SplitVerticalInward, SplitVerticalOutward, BlindsHorizontal, BlindsVertical, BoxInward, BoxOutward, WipeLeftToRight, WipeBottomToTop, WipeRightToLeft, WipeTopToBottom, Dissolve, GlitterLeftToRight, GlitterTopToBottom, GlitterTopLeftToBottomRight }; enum WidgetType { PushButton, RadioButton, CheckBox, Edit, ListBox, ComboBox, Hierarchy, Signature }; enum WidgetState { // PushButton, RadioButton, CheckBox; Down means selected for // RadioButton and CheckBox Up, Down }; enum ErrorCode { // transparent object occurred and was draw opaque because // PDF/A does not allow transparency Warning_Transparency_Omitted_PDFA, // transparent object occurred but is only supported since // PDF 1.4 Warning_Transparency_Omitted_PDF13, // a form action was exported that is not suitable for PDF/A // the action was skipped Warning_FormAction_Omitted_PDFA, // transparent objects were converted to a bitmap in order // to removetransparencies from the output Warning_Transparency_Converted }; struct VCL_DLLPUBLIC AnyWidget { protected: WidgetType Type; // primitive RTTI public: OUString Name; // a distinct name to identify the control OUString Description;// descriptive text for the contro (e.g. for tool tip) OUString Text; // user text to appear on the control sal_uInt16 TextStyle; // style flags bool ReadOnly; Rectangle Location; // describes the area filled by the control bool Border; // true: widget should have a border, false: no border Color BorderColor;// COL_TRANSPARENT and Border=true means get color from application settings bool Background; // true: widget shall draw its background, false: no background Color BackgroundColor; // COL_TRANSPARENT and Background=true means get color from application settings vcl::Font TextFont; // an empty font will be replaced by the // appropriate font from the user settings Color TextColor; // COL_TRANSPARENT will be replaced by the appropriate color from application settings sal_Int32 TabOrder; // lowest number is first in tab order /* style flags for text are those for OutputDevice::DrawText allowed values are: TEXT_DRAW_LEFT, TEXT_DRAW_CENTER, TEXT_DRAW_RIGHT, TEXT_DRAW_TOP, TEXT_DRAW_VCENTER, TEXT_DRAW_BOTTOM, TEXT_DRAW_MULTILINE, TEXT_DRAW_WORDBREAK if TextStyle is 0, then each control will fill in default values */ // note: the Name member comprises the field name of the resulting // PDF field names need to be globally unique. Therefore if any // Widget with an already used name is created, the name will be // made unique by adding an underscore ('_') and an ascending number // to the name. AnyWidget( WidgetType eType ) : Type( eType ), TextStyle( 0 ), ReadOnly( false ), Border( false ), BorderColor( COL_TRANSPARENT ), Background( false ), BackgroundColor( COL_TRANSPARENT ), TextColor( COL_TRANSPARENT ), TabOrder( -1 ) {} virtual ~AnyWidget(); WidgetType getType() const { return Type; } virtual AnyWidget* Clone() const = 0; protected: // note that this equals the default compiler-generated copy-ctor, but we want to have it // protected, to only allow sub classes to access it AnyWidget( const AnyWidget& rSource ) :Type( rSource.Type ) ,Name( rSource.Name ) ,Description( rSource.Description ) ,Text( rSource.Text ) ,TextStyle( rSource.TextStyle ) ,ReadOnly( rSource.ReadOnly ) ,Location( rSource.Location ) ,Border( rSource.Border ) ,BorderColor( rSource.BorderColor ) ,Background( rSource.Background ) ,BackgroundColor( rSource.BackgroundColor ) ,TextFont( rSource.TextFont ) ,TextColor( rSource.TextColor ) ,TabOrder( rSource.TabOrder ) { } AnyWidget& operator=( const AnyWidget& ); // never implemented }; struct PushButtonWidget : public AnyWidget { /* If Dest is set to a valid link destination, Then pressing the button will act as a goto action within the document. Else: An empty URL means this button will reset the form. If URL is not empty and Submit is set, then the URL contained will be set as the URL to submit the form to. In this case the submit method will be either GET if SubmitGet is true or POST if SubmitGet is false. If URL is not empty and Submit is clear, then the URL contained will be interpreted as a hyperlink to be executed on pushing the button. There will be no error checking or any kind of conversion done to the URL parameter execept this: it will be output as 7bit Ascii. The URL will appear literally in the PDF file produced */ sal_Int32 Dest; OUString URL; bool Submit; bool SubmitGet; PushButtonWidget() : AnyWidget( vcl::PDFWriter::PushButton ), Dest( -1 ), Submit( false ), SubmitGet( false ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new PushButtonWidget( *this ); } }; struct CheckBoxWidget : public AnyWidget { bool Checked; bool ButtonIsLeft; CheckBoxWidget() : AnyWidget( vcl::PDFWriter::CheckBox ), Checked( false ), ButtonIsLeft( true ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new CheckBoxWidget( *this ); } }; struct RadioButtonWidget : public AnyWidget { bool Selected; sal_Int32 RadioGroup; bool ButtonIsLeft; OUString OnValue; // the value of the radio button if it is selected RadioButtonWidget() : AnyWidget( vcl::PDFWriter::RadioButton ), Selected( false ), RadioGroup( 0 ), ButtonIsLeft( true ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new RadioButtonWidget( *this ); } // radio buttons having the same RadioGroup id comprise one // logical radio button group, that is at most one of the RadioButtons // in a group can be checked at any time // // note: a PDF radio button field consists of a named field // containing unnamed checkbox child fields. The name of the // radio button field is taken from the first RadioButtonWidget created // in the group }; struct EditWidget : public AnyWidget { bool MultiLine; // whether multiple lines are allowed bool Password; // visible echo off bool FileSelect; // field is a file selector sal_Int32 MaxLen; // maximum field length in characters, 0 means unlimited EditWidget() : AnyWidget( vcl::PDFWriter::Edit ), MultiLine( false ), Password( false ), FileSelect( false ), MaxLen( 0 ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new EditWidget( *this ); } }; struct ListBoxWidget : public AnyWidget { bool DropDown; bool Sort; bool MultiSelect; std::vector Entries; std::vector SelectedEntries; // if MultiSelect is false only the first entry of SelectedEntries // will be taken into account. the same is implicit for PDF < 1.4 // since multiselect is a 1.4+ feature ListBoxWidget() : AnyWidget( vcl::PDFWriter::ListBox ), DropDown( false ), Sort( false ), MultiSelect( false ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new ListBoxWidget( *this ); } }; // note: PDF only supports dropdown comboboxes struct ComboBoxWidget : public AnyWidget { bool Sort; std::vector Entries; // set the current value in AnyWidget::Text ComboBoxWidget() : AnyWidget( vcl::PDFWriter::ComboBox ), Sort( false ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new ComboBoxWidget( *this ); } }; struct SignatureWidget: public AnyWidget { // Use Sig prefix for members to avoid conflict with // the Location member of the AnyWidget which spcifies the coordinates // of the signature OUString SigLocation; OUString SigReason; OUString SigContactInfo; bool SigHidden; SignatureWidget() : AnyWidget( vcl::PDFWriter::Signature ), SigHidden( true ) {} virtual AnyWidget* Clone() const SAL_OVERRIDE { return new SignatureWidget( *this ); } }; enum ExportDataFormat { HTML, XML, FDF, PDF }; // see 3.6.1 of PDF 1.4 ref for details, used for 8.1 PDF v 1.4 ref also // These emuns are treated as integer while reading/writing to configuration enum PDFViewerPageMode { ModeDefault, UseOutlines, UseThumbs }; // These emuns are treated as integer while reading/writing to configuration enum PDFViewerAction { ActionDefault, FitInWindow, FitWidth, FitVisible, ActionZoom }; // These enums are treated as integer while reading/writing to configuration enum PDFPageLayout { DefaultLayout, SinglePage, Continuous, ContinuousFacing }; // These emuns are treated as integer while reading/writing to configuration //what default action to generate in a PDF hyperlink to external document/site enum PDFLinkDefaultAction { URIAction, URIActionDestination, LaunchAction }; /* The following structure describes the permissions used in PDF security */ struct PDFEncryptionProperties { bool Security128bit; // true to select 128 bit encryption, false for 40 bit //for both 40 and 128 bit security, see 3.5.2 PDF v 1.4 table 3.15, v 1.5 and v 1.6 table 3.20. bool CanPrintTheDocument; bool CanModifyTheContent; bool CanCopyOrExtract; bool CanAddOrModify; //for revision 3 (bit 128 security) only bool CanFillInteractive; bool CanExtractForAccessibility; bool CanAssemble; bool CanPrintFull; // encryption will only happen if EncryptionKey is not empty // EncryptionKey is actually a construct out of OValue, UValue and DocumentIdentifier // if these do not match, behavior is undefined, most likely an invalid PDF will be produced // OValue, UValue, EncryptionKey and DocumentIdentifier can be computed from // PDFDocInfo, Owner password and User password used the InitEncryption method which // implements the algorithms described in the PDF reference chapter 3.5: Encryption std::vector OValue; std::vector UValue; std::vector EncryptionKey; std::vector DocumentIdentifier; //permission default set for 128 bit, accessibility only PDFEncryptionProperties() : Security128bit ( true ), CanPrintTheDocument ( false ), CanModifyTheContent ( false ), CanCopyOrExtract ( false ), CanAddOrModify ( false ), CanFillInteractive ( false ), CanExtractForAccessibility ( true ), CanAssemble ( false ), CanPrintFull ( false ) {} bool Encrypt() const { return ! OValue.empty() && ! UValue.empty() && ! DocumentIdentifier.empty(); } }; struct PDFDocInfo { OUString Title; // document title OUString Author; // document author OUString Subject; // subject OUString Keywords; // keywords OUString Creator; // application that created the original document OUString Producer; // OpenOffice }; enum ColorMode { DrawColor, DrawGreyscale }; struct PDFWriterContext { /* must be a valid file: URL usable by osl */ OUString URL; /* the URL of the document being exported, used for relative links*/ OUString BaseURL; /*if relative to file system should be formed*/ bool RelFsys;//i56629, i49415?, i64585? /*the action to set the PDF hyperlink to*/ PDFWriter::PDFLinkDefaultAction DefaultLinkAction; //convert the .od? target file type in a link to a .pdf type //this is examined before doing anything else bool ConvertOOoTargetToPDFTarget; //when the file type is .pdf, force the GoToR action bool ForcePDFAction; /* decides the PDF language level to be produced */ PDFVersion Version; /* valid for PDF >= 1.4 causes the MarkInfo entry in the document catalog to be set */ bool Tagged; /* determines in which format a form will be submitted. */ PDFWriter::ExportDataFormat SubmitFormat; bool AllowDuplicateFieldNames; bool FieldsUseSystemFonts; /* the following data members are used to customize the PDF viewer preferences */ /* see 3.6.1 PDF v 1.4 ref*/ PDFWriter::PDFViewerPageMode PDFDocumentMode; PDFWriter::PDFViewerAction PDFDocumentAction; // in percent, valid only if PDFDocumentAction == ActionZoom sal_Int32 Zoom; /* see 8.6 PDF v 1.4 ref specifies whether to hide the viewer tool bars when the document is active. */ bool HideViewerToolbar; bool HideViewerMenubar; bool HideViewerWindowControls; bool FitWindow; bool OpenInFullScreenMode; bool CenterWindow; bool DisplayPDFDocumentTitle; PDFPageLayout PageLayout; bool FirstPageLeft; // initially visible page in viewer (starting with 0 for first page) sal_Int32 InitialPage; sal_Int32 OpenBookmarkLevels; // -1 means all levels PDFWriter::PDFEncryptionProperties Encryption; PDFWriter::PDFDocInfo DocumentInfo; bool SignPDF; OUString SignLocation; OUString SignPassword; OUString SignReason; OUString SignContact; com::sun::star::lang::Locale DocumentLocale; // defines the document default language sal_uInt32 DPIx, DPIy; // how to handle MapMode( MAP_PIXEL ) // 0 here specifies a default handling PDFWriter::ColorMode ColorMode; com::sun::star::uno::Reference< com::sun::star::security::XCertificate> SignCertificate; PDFWriterContext() : RelFsys( false ), //i56629, i49415?, i64585? DefaultLinkAction( PDFWriter::URIAction ), ConvertOOoTargetToPDFTarget( false ), ForcePDFAction( false ), Version( PDFWriter::PDF_1_4 ), Tagged( false ), SubmitFormat( PDFWriter::FDF ), AllowDuplicateFieldNames( false ), FieldsUseSystemFonts( true ), PDFDocumentMode( PDFWriter::ModeDefault ), PDFDocumentAction( PDFWriter::ActionDefault ), Zoom( 100 ), HideViewerToolbar( false ), HideViewerMenubar( false ), HideViewerWindowControls( false ), FitWindow( false ), OpenInFullScreenMode( false ), CenterWindow( false ), DisplayPDFDocumentTitle( true ), PageLayout( PDFWriter::DefaultLayout ), FirstPageLeft( false ), InitialPage( 1 ), OpenBookmarkLevels( -1 ), Encryption(), SignPDF( false ), DPIx( 0 ), DPIy( 0 ), ColorMode( PDFWriter::DrawColor ), SignCertificate( 0 ) {} }; PDFWriter( const PDFWriterContext& rContext, const com::sun::star::uno::Reference< com::sun::star::beans::XMaterialHolder >& ); ~PDFWriter(); /** Returns an OutputDevice for formatting This Output device is guaranteed to use the same font metrics as the resulting PDF file. @returns the reference output device */ OutputDevice* GetReferenceDevice(); /** Creates a new page to fill If width and height are not set the page size is inherited from the page tree other effects: resets the graphics state: MapMode, Font Colors and other state information MUST be set again or are undefined. @returns returns the page id of the new page */ sal_Int32 NewPage( sal_Int32 nPageWidth = 0, sal_Int32 nPageHeight = 0, Orientation eOrientation = Inherit ); /** Play a metafile like an outputdevice would do */ struct PlayMetafileContext { int m_nMaxImageResolution; bool m_bOnlyLosslessCompression; int m_nJPEGQuality; bool m_bTransparenciesWereRemoved; PlayMetafileContext() : m_nMaxImageResolution( 0 ) , m_bOnlyLosslessCompression( false ) , m_nJPEGQuality( 90 ) , m_bTransparenciesWereRemoved( false ) {} }; void PlayMetafile( const GDIMetaFile&, const PlayMetafileContext&, vcl::PDFExtOutDevData* pDevDat = NULL ); /* sets the document locale originally passed with the context to a new value * only affects the output if used before calling Emit. */ void SetDocumentLocale( const com::sun::star::lang::Locale& rDocLocale ); /* finishes the file */ bool Emit(); /* * Get a list of errors that occurred during processing * this should enable the producer to give feedback about * any anomalies that might have occurred */ std::set< ErrorCode > GetErrors(); static com::sun::star::uno::Reference< com::sun::star::beans::XMaterialHolder > InitEncryption( const OUString& i_rOwnerPassword, const OUString& i_rUserPassword, bool b128Bit ); /* functions for graphics state */ /* flag values: see vcl/outdev.hxx */ void Push( PushFlags nFlags = PUSH_ALL ); void Pop(); void SetClipRegion(); void SetClipRegion( const basegfx::B2DPolyPolygon& rRegion ); void MoveClipRegion( long nHorzMove, long nVertMove ); void IntersectClipRegion( const Rectangle& rRect ); void IntersectClipRegion( const basegfx::B2DPolyPolygon& rRegion ); void SetLayoutMode( ComplexTextLayoutMode nMode ); void SetDigitLanguage( LanguageType eLang ); void SetLineColor( const Color& rColor ); void SetLineColor() { SetLineColor( Color( COL_TRANSPARENT ) ); } void SetFillColor( const Color& rColor ); void SetFillColor() { SetFillColor( Color( COL_TRANSPARENT ) ); } void SetFont( const vcl::Font& rNewFont ); void SetTextColor( const Color& rColor ); void SetTextFillColor(); void SetTextFillColor( const Color& rColor ); void SetTextLineColor(); void SetTextLineColor( const Color& rColor ); void SetOverlineColor(); void SetOverlineColor( const Color& rColor ); void SetTextAlign( ::TextAlign eAlign ); void SetMapMode( const MapMode& rNewMapMode ); /* actual drawing functions */ void DrawText( const Point& rPos, const OUString& rText ); void DrawTextLine( const Point& rPos, long nWidth, FontStrikeout eStrikeout, FontUnderline eUnderline, FontUnderline eOverline, bool bUnderlineAbove = false ); void DrawTextArray( const Point& rStartPt, const OUString& rStr, const long* pDXAry, sal_Int32 nIndex, sal_Int32 nLen ); void DrawStretchText( const Point& rStartPt, sal_uLong nWidth, const OUString& rStr, sal_Int32 nIndex, sal_Int32 nLen ); void DrawText( const Rectangle& rRect, const OUString& rStr, sal_uInt16 nStyle = 0 ); void DrawPixel( const Point& rPt, const Color& rColor ); void DrawPixel( const Point& rPt ) { DrawPixel( rPt, Color( COL_TRANSPARENT ) ); } void DrawLine( const Point& rStartPt, const Point& rEndPt ); void DrawLine( const Point& rStartPt, const Point& rEndPt, const LineInfo& rLineInfo ); void DrawPolyLine( const Polygon& rPoly ); void DrawPolyLine( const Polygon& rPoly, const LineInfo& rLineInfo ); void DrawPolyLine( const Polygon& rPoly, const ExtLineInfo& rInfo ); void DrawPolygon( const Polygon& rPoly ); void DrawPolyPolygon( const PolyPolygon& rPolyPoly ); void DrawRect( const Rectangle& rRect ); void DrawRect( const Rectangle& rRect, sal_uLong nHorzRount, sal_uLong nVertRound ); void DrawEllipse( const Rectangle& rRect ); void DrawArc( const Rectangle& rRect, const Point& rStartPt, const Point& rEndPt ); void DrawPie( const Rectangle& rRect, const Point& rStartPt, const Point& rEndPt ); void DrawChord( const Rectangle& rRect, const Point& rStartPt, const Point& rEndPt ); void DrawBitmap( const Point& rDestPt, const Size& rDestSize, const Bitmap& rBitmap ); void DrawBitmapEx( const Point& rDestPt, const Size& rDestSize, const BitmapEx& rBitmapEx ); void DrawGradient( const Rectangle& rRect, const Gradient& rGradient ); void DrawGradient( const PolyPolygon& rPolyPoly, const Gradient& rGradient ); void DrawHatch( const PolyPolygon& rPolyPoly, const Hatch& rHatch ); void DrawWallpaper( const Rectangle& rRect, const Wallpaper& rWallpaper ); void DrawTransparent( const PolyPolygon& rPolyPoly, sal_uInt16 nTransparencePercent ); /** Start a transparency group Drawing operations can be grouped together to acquire a common transparency behaviour; after calling BeginTransparencyGroup all drawing operations will be grouped together into a transparent object. The transparency behaviour is set with ond of the EndTransparencyGroup calls and can be either a constant transparency factor or a transparent soft mask in form of an 8 bit gray scale bitmap. It is permissible to nest transparency group. Transparency groups MUST NOT span multiple pages Transparency is a feature introduced in PDF1.4, so transparency group will be ignored if the produced PDF has a lower version. The drawing operations will be emitted normally. */ void BeginTransparencyGroup(); /** End a transparency group with constant transparency factor This ends a transparency group and inserts it on the current page. The coordinates of the group result out of the grouped drawing operations. @param rBoundRect The bounding rectangle of the group @param nTransparencePercent The transparency factor */ void EndTransparencyGroup( const Rectangle& rBoundRect, sal_uInt16 nTransparencePercent ); /** Insert a JPG encoded image (optionally with mask) @param rJPGData a Stream containing the encoded image @param bIsTrueColor true: jpeg is 24 bit true color, false: jpeg is 8 bit greyscale @param rSrcSizePixel size in pixel of the image @param rTargetArea where to put the image @param rMask optional mask; if not empty it must have the same pixel size as the image and be either 1 bit black&white or 8 bit grey */ void DrawJPGBitmap( SvStream& rJPGData, bool bIsTrueColor, const Size& rSrcSizePixel, const Rectangle& rTargetArea, const Bitmap& rMask ); /** Create a new named destination to be used in a link from another PDF document @param sDestName the name (label) of the bookmark, to be used to jump to @param rRect target rectangle on page to be displayed if dest is jumped to @param nPageNr number of page the dest is on (as returned by NewPage) or -1 in which case the current page is used @param eType what dest type to use @returns the destination id (to be used in SetLinkDest) or -1 if page id does not exist */ sal_Int32 CreateNamedDest( const OUString& sDestName, const Rectangle& rRect, sal_Int32 nPageNr = -1, DestAreaType eType = XYZ ); /** Create a new destination to be used in a link @param rRect target rectangle on page to be displayed if dest is jumped to @param nPageNr number of page the dest is on (as returned by NewPage) or -1 in which case the current page is used @param eType what dest type to use @returns the destination id (to be used in SetLinkDest) or -1 if page id does not exist */ sal_Int32 CreateDest( const Rectangle& rRect, sal_Int32 nPageNr = -1, DestAreaType eType = XYZ ); /** Create a new link on a page @param rRect active rectangle of the link (that is the area that has to be hit to activate the link) @param nPageNr number of page the link is on (as returned by NewPage) or -1 in which case the current page is used @returns the link id (to be used in SetLinkDest, SetLinkURL) or -1 if page id does not exist */ sal_Int32 CreateLink( const Rectangle& rRect, sal_Int32 nPageNr = -1 ); /** creates a destination which is not intended to be referred to by a link, but by a public destination Id. Form widgets, for instance, might refer to a destination, without ever actually creating a source link to point to this destination. In such cases, a public destination Id will be assigned to the form widget, and later on, the concrete destination data for this public Id will be registered using RegisterDestReference. @param nDestId destination ID @param rRect target rectangle on page to be displayed if dest is jumped to @param nPageNr number of page the dest is on (as returned by NewPage) or -1 in which case the current page is used @param eType what dest type to use @returns the internal destination Id. */ sal_Int32 RegisterDestReference( sal_Int32 nDestId, const Rectangle& rRect, sal_Int32 nPageNr = -1, DestAreaType eType = XYZ ); /** Set the destination for a link will change a URL type link to a dest link if necessary @param nLinkId the link to be changed @param nDestId the dest the link shall point to @returns 0 for success -1 in case the link id does not exist -2 in case the dest id does not exist */ sal_Int32 SetLinkDest( sal_Int32 nLinkId, sal_Int32 nDestId ); /** Set the URL for a link will change a dest type link to an URL type link if necessary @param nLinkId the link to be changed @param rURL the URL the link shall point to. The URL will be parsed (and corrected) by the com.sun.star.util.URLTransformer service; the result will then appear literally in the PDF file produced @returns 0 for success -1 in case the link id does not exist */ sal_Int32 SetLinkURL( sal_Int32 nLinkId, const OUString& rURL ); /** Resolve link in logical structure If a link is created after the corresponding visual appearance was drawn it is not possible to set the link id as a property attribute to the link structure item that should be created in tagged PDF around the visual appearance of a link. For this reason an arbitrary id can be given to SetStructureAttributeNumerical at the time the text for the link is drawn. To resolve this arbitrary id again when the actual link annotation is created use SetLinkPropertyID. When Emit finally gets called all LinkAnnotation type structure attributes will be replaced with the correct link id. CAUTION: this technique must be used either for all or none of the links in a document since the link id space and arbitrary property id space could overlap and it would be impossible to resolve whether a Link structure attribute value was arbitrary or already a real id. @param nLinkId the link to be mapped @param nPropertyID the arbitrary id set in a Link structure element to address the link with real id nLinkId */ void SetLinkPropertyID( sal_Int32 nLinkId, sal_Int32 nPropertyID ); /** Create a new outline item @param nParent declares the parent of the new item in the outline hierarchy. An invalid value will result in a new toplevel item. @param rText sets the title text of the item @param nDestID declares which Dest (created with CreateDest) the outline item will point to @returns the outline item id of the new item */ sal_Int32 CreateOutlineItem( sal_Int32 nParent = 0, const OUString& rText = OUString(), sal_Int32 nDestID = -1 ); /** Set an outline item's parent @param nItem specififies which item should be reparented. @param nNewParent specifies which outline item will be the item's new parent. Use 0 for reparenting to top level. @returns -1 if the item does not exist -2 if the new parent does not exist, item will be reparented to top level. */ sal_Int32 SetOutlineItemParent( sal_Int32 nItem, sal_Int32 nNewParent ); /** Set an outline item's title text @param nItem specififies which item should get a new text @param rText sets the title text of the item @returns 0 if the item exists and the text was changed -1 if the item does not exist */ sal_Int32 SetOutlineItemText( sal_Int32 nItem, const OUString& rText ); /** Set an outline item's destination @param nItem specififies which item should get a new dest @param nDestID specifies the item's new destination @returns -1 if the item does not exist -2 if the new dest does not exist, dest will remain unchanged */ sal_Int32 SetOutlineItemDest( sal_Int32 nItem, sal_Int32 nDestID ); /** Create a new note on a page @param rRect active rectangle of the note (that is the area that has to be hit to popup the annotation) @param rNote specifies the contents of the note @param nPageNr number of page the note is on (as returned by NewPage) or -1 in which case the current page is used */ void CreateNote( const Rectangle& rRect, const PDFNote& rNote, sal_Int32 nPageNr = -1 ); /** begin a new logical structure element BeginStructureElement/EndStructureElement calls build the logical structure of the PDF - the basis for tagged PDF. Structural elements are implemented using marked content tags. Each structural element can contain sub elements (e.g. a section can contain a heading and a paragraph). The structure hierarchy is build automatically from the Begin/EndStructureElement calls. A structural element need not be contained on one page; e.g. paragraphs often run from one page to the next. In this case the corresponding EndStructureElement must be called while drawing the next page. BeginStructureElement and EndStructureElement must be called only after PDFWriter::NewPage has been called and before PDFWriter::Emit gets called. The current page number is an implicit context parameter for Begin/EndStructureElement. For pagination artifacts that are not part of the logical structure of the document (like header, footer or page number) the special StructElement NonStructElement exists. To place content outside of the struture tree simply call BeginStructureElement( NonStructElement ) then draw your content and then call EndStructureElement(). All children of a NonStructElement will not be part of the structure. Nonetheless if you add a child structural element to a NonStructElement you will still have to call EndStructureElement for it. Best think of the structure tree as a stack. Note: there is always one structural element in existence without having called BeginStructureElement; this is the root of the structure tree (called StructTreeRoot). The StructTreeRoot has always the id 0. @param eType denotes what kind of element to begin (e.g. a heading or paragraph) @param rAlias the specified alias will be used as structure tag. Also an entry in the PDF's role map will be created mapping alias to regular structure type. @returns the new structure element's id for use in SetCurrentStructureElement */ sal_Int32 BeginStructureElement( enum StructElement eType, const OUString& rAlias = OUString() ); /** end the current logical structure element Close the current structure element. The current element's parent becomes the current structure element again. @see BeginStructureElement */ void EndStructureElement(); /** set the current structure element For different purposes it may be useful to paint a structure element's content discontinously. In that case an already existing structure element can be appended to by using SetCurrentStructureElement. The refenrenced structure element becomes the current structure element with all consequences: all following structure elements are appended as children of the current element. @param nElement the id of the new current structure element @returns True if the current structure element could be set successfully False if the current structure element could not be changed (e.g. if the passed element id is invalid) */ bool SetCurrentStructureElement( sal_Int32 nElement ); /** set a structure attribute on the current structural element SetStructureAttribute sets an attribute of the current structural element to a new value. A consistency check is performed before actually setting the value; if the check fails, the function returns False and the attribute remains unchanged. @param eAttr denotes what attribute to change @param eVal the value to set the attribute to @returns True if the value was valid and the change has been performed, False if the attribute or value was invalid; attribute remains unchanged */ bool SetStructureAttribute( enum StructAttribute eAttr, enum StructAttributeValue eVal ); /** set a structure attribute on the current structural element SetStructureAttributeNumerical sets an attribute of the current structural element to a new numerical value. A consistency check is performed before actually setting the value; if the check fails, the function returns False and the attribute remains unchanged. @param eAttr denotes what attribute to change @param nValue the value to set the attribute to @returns True if the value was valid and the change has been performed, False if the attribute or value was invalid; attribute remains unchanged */ bool SetStructureAttributeNumerical( enum StructAttribute eAttr, sal_Int32 nValue ); /** set the bounding box of a structural element SetStructureBoundingBox sets the BBox attribute to a new value. Since the BBox attribute can only be applied to Table, Figure, Form and Formula elements, a call of this function for other element types will be ignored and the BBox attribute not be set. @param rRect the new bounding box for the structural element */ void SetStructureBoundingBox( const Rectangle& rRect ); /** set the ActualText attribute of a structural element ActualText contains the Unicode text without layout artifacts that is shown by a structural element. For example if a line is ended prematurely with a break in a word and continued on the next line (e.g. "happen-stance") the corresponding ActualText would contain the unbroken line (e.g. "happenstance"). @param rText contains the complete logical text the structural element displays. */ void SetActualText( const OUString& rText ); /** set the Alt attribute of a strutural element Alt is s replacement text describing the contents of a structural element. This is mainly used by accessibility applications; e.g. a screen reader would read the Alt replacement text for an image to a visually impaired user. @param rText contains the replacement text for the structural element */ void SetAlternateText( const OUString& rText ); /** Sets the time in seconds a page will appear before the next page is shown automatically @param nSeconds time in seconds the current page will be shown; pass 0 for manual advancement @param nPageNr the page number to apply the autoadvance time to; -1 denotes the current page */ void SetAutoAdvanceTime( sal_uInt32 nSeconds, sal_Int32 nPageNr = -1 ); /** Sets the transitional effect to be applied when the current page gets shown. @param eType the kind of effect to be used; use Regular to disable transitional effects for this page @param nMilliSec the duration of the transitional effect in milliseconds; set 0 to disable transitional effects @param nPageNr the page number to apply the effect to; -1 denotes the current page */ void SetPageTransition( PageTransition eType, sal_uInt32 nMilliSec, sal_Int32 nPageNr = -1 ); /** create a new form control This function creates a new form control in the PDF and sets its various properties. Do not pass an actual AnyWidget as rControlType will be cast to the type described by the type member. @param rControlType a descendant of AnyWidget determing the control's properties @param nPageNr the page number to apply the effect to; -1 denotes the current page @returns the new control's id for reference purposes */ sal_Int32 CreateControl( const AnyWidget& rControlType, sal_Int32 nPageNr = -1 ); /** Inserts an additional stream to the PDF file This function adds an arbitrary stream to the produced PDF file. May be called any time before Emit(). The stream will be written during Emit by calling the PDFOutputStream Object's write method. After the call the PDFOutputStream will be deleted. All additional streams and their mimetypes will be entered into an array in the trailer dictionary. @param rMimeType the mimetype of the stream @param pStream the interface to the additional stream @param bCompress specifies whether the stream should be flate encoded by PDFWriter or not */ void AddStream( const OUString& rMimeType, PDFOutputStream* pStream, bool bCompress ); }; } #endif // INCLUDED_VCL_PDFWRITER_HXX /* vim:set shiftwidth=4 softtabstop=4 expandtab: */