diff options
| -rw-r--r-- | docs/plugins/gst-plugins-ugly-plugins.args.new | 1110 | ||||
| -rw-r--r-- | docs/plugins/gst-plugins-ugly-plugins.signals.new | 50 |
2 files changed, 0 insertions, 1160 deletions
diff --git a/docs/plugins/gst-plugins-ugly-plugins.args.new b/docs/plugins/gst-plugins-ugly-plugins.args.new deleted file mode 100644 index cb793f34..00000000 --- a/docs/plugins/gst-plugins-ugly-plugins.args.new +++ /dev/null @@ -1,1110 +0,0 @@ -<ARG> -<NAME>GstRDTManager::latency</NAME> -<TYPE>guint</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Buffer latency in ms</NICK> -<BLURB>Amount of ms to buffer.</BLURB> -<DEFAULT>200</DEFAULT> -</ARG> - -<ARG> -<NAME>GstPNMSrc::location</NAME> -<TYPE>gchar*</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>PNM Location</NICK> -<BLURB>Location of the PNM url to read.</BLURB> -<DEFAULT>NULL</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMPEGParse::byte-offset</NAME> -<TYPE>guint64</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Byte Offset</NICK> -<BLURB>Emit reached-offset signal when the byte offset is reached.</BLURB> -<DEFAULT>18446744073709551615</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMPEGParse::max-scr-gap</NAME> -<TYPE>gint</TYPE> -<RANGE>>= G_MAXULONG</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Max SCR gap</NICK> -<BLURB>Maximum allowed gap between expected and actual SCR values. -1 means never adjust.</BLURB> -<DEFAULT>120000</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMPEGParse::time-offset</NAME> -<TYPE>guint64</TYPE> -<RANGE></RANGE> -<FLAGS>r</FLAGS> -<NICK>Time Offset</NICK> -<BLURB>Time offset in the stream.</BLURB> -<DEFAULT>18446744073709551615</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMPEGAudioParse::bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE></RANGE> -<FLAGS>r</FLAGS> -<NICK>Bitrate</NICK> -<BLURB>Bit Rate.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMPEGAudioParse::skip</NAME> -<TYPE>gint</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>skip</NICK> -<BLURB>skip.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>AC3IEC::raw-audio</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>raw-audio</NICK> -<BLURB>If true, source pad caps are set to raw audio.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstCdioCddaSrc::read-speed</NAME> -<TYPE>gint</TYPE> -<RANGE>[G_MAXULONG,100]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Read speed</NICK> -<BLURB>Read from device at the specified speed (-1 = default).</BLURB> -<DEFAULT>-1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstAmrnbDec::variant</NAME> -<TYPE>GstAmrnbVariant</TYPE> -<RANGE></RANGE> -<FLAGS>rwx</FLAGS> -<NICK>Variant</NICK> -<BLURB>The decoder variant.</BLURB> -<DEFAULT>IF1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstAmrnbEnc::band-mode</NAME> -<TYPE>GstAmrnbEncBandMode</TYPE> -<RANGE></RANGE> -<FLAGS>rwx</FLAGS> -<NICK>Band Mode</NICK> -<BLURB>Encoding Band Mode (Kbps).</BLURB> -<DEFAULT>MR122</DEFAULT> -</ARG> - -<ARG> -<NAME>GstA52Dec::drc</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Dynamic Range Compression</NICK> -<BLURB>Use Dynamic Range Compression.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstA52Dec::lfe</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>LFE</NICK> -<BLURB>LFE.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstA52Dec::mode</NAME> -<TYPE>GstA52DecMode</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Decoder Mode</NICK> -<BLURB>Decoding Mode (default 3f2r).</BLURB> -<DEFAULT>3 Front, 2 Rear</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLameMP3Enc::bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[8,320]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Bitrate (kb/s)</NICK> -<BLURB>Bitrate in kbit/sec (Only valid if target is bitrate, for CBR one of 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).</BLURB> -<DEFAULT>128</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLameMP3Enc::cbr</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>CBR</NICK> -<BLURB>Enforce constant bitrate encoding (Only valid if target is bitrate).</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLameMP3Enc::encoding-engine-quality</NAME> -<TYPE>GstLameMP3EncEncodingEngineQuality</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Encoding Engine Quality</NICK> -<BLURB>Quality/speed of the encoding engine, this does not affect the bitrate!.</BLURB> -<DEFAULT>Standard</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLameMP3Enc::mono</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Mono</NICK> -<BLURB>Enforce mono encoding.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLameMP3Enc::quality</NAME> -<TYPE>gfloat</TYPE> -<RANGE>[0,9.999]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Quality</NICK> -<BLURB>VBR Quality from 0 to 10, 0 being the best (Only valid if target is quality).</BLURB> -<DEFAULT>4</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLameMP3Enc::target</NAME> -<TYPE>GstLameMP3EncTarget</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Target</NICK> -<BLURB>Optimize for quality or bitrate.</BLURB> -<DEFAULT>Quality</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::allow-diff-short</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Allow diff short</NICK> -<BLURB>Allow diff short.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::ath-lower</NAME> -<TYPE>gint</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>ATH lower</NICK> -<BLURB>lowers ATH by x dB.</BLURB> -<DEFAULT>3</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::ath-only</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>ATH only</NICK> -<BLURB>Ignore GPSYCHO completely, use ATH only.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::ath-short</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>ATH short</NICK> -<BLURB>Ignore GPSYCHO for short blocks, use ATH only.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,320]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Bitrate (kb/s)</NICK> -<BLURB>Bitrate in kbit/sec (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).</BLURB> -<DEFAULT>128</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::compression-ratio</NAME> -<TYPE>gfloat</TYPE> -<RANGE>[0,200]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Compression Ratio</NICK> -<BLURB>let lame choose bitrate to achieve selected compression ratio.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::copyright</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Copyright</NICK> -<BLURB>Mark as copyright.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::cwlimit</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,50000]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Cwlimit</NICK> -<BLURB>Compute tonality up to freq (in kHz) default 8.8717 (DEPRECATED: this setting has no effect).</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::disable-reservoir</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Disable reservoir</NICK> -<BLURB>Disable the bit reservoir.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::emphasis</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Emphasis</NICK> -<BLURB>Emphasis.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::error-protection</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Error protection</NICK> -<BLURB>Adds 16 bit checksum to every frame.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::extension</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Extension</NICK> -<BLURB>Extension.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::force-ms</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Force ms</NICK> -<BLURB>Force ms_stereo on all frames.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::free-format</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Free format</NICK> -<BLURB>Produce a free format bitstream.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::highpass-freq</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,50000]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Highpass freq</NICK> -<BLURB>frequency(kHz), highpass filter cutoff below freq.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::highpass-width</NAME> -<TYPE>gint</TYPE> -<RANGE>>= G_MAXULONG</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Highpass width</NICK> -<BLURB>frequency(kHz) - default 15% of highpass freq.</BLURB> -<DEFAULT>-1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::lowpass-freq</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,50000]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Lowpass freq</NICK> -<BLURB>frequency(kHz), lowpass filter cutoff above freq.</BLURB> -<DEFAULT>17000</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::lowpass-width</NAME> -<TYPE>gint</TYPE> -<RANGE>>= G_MAXULONG</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Lowpass width</NICK> -<BLURB>frequency(kHz) - default 15% of lowpass freq.</BLURB> -<DEFAULT>-1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::mode</NAME> -<TYPE>GstLameMode</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Mode</NICK> -<BLURB>Encoding mode.</BLURB> -<DEFAULT>Joint Stereo</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::no-ath</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>No ath</NICK> -<BLURB>turns ATH down to a flat noise floor.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::no-short-blocks</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>No short blocks</NICK> -<BLURB>Do not use short blocks.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::original</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Original</NICK> -<BLURB>Mark as original.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::padding-type</NAME> -<TYPE>GstLamePadding</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Padding type</NICK> -<BLURB>Padding type (DEPRECATED: this setting has no effect).</BLURB> -<DEFAULT>No Padding</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::preset</NAME> -<TYPE>GstLamePreset</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Lame Preset</NICK> -<BLURB>Lame Preset.</BLURB> -<DEFAULT>None</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::quality</NAME> -<TYPE>GstLameQuality</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Quality</NICK> -<BLURB>Quality of algorithm used for encoding.</BLURB> -<DEFAULT>3</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::strict-iso</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Strict ISO</NICK> -<BLURB>Comply as much as possible to ISO MPEG spec.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::vbr</NAME> -<TYPE>GstLameVbrmode</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR</NICK> -<BLURB>Specify bitrate mode.</BLURB> -<DEFAULT>No VBR (Constant Bitrate)</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::vbr-hard-min</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,1]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR hard min</NICK> -<BLURB>Specify whether min VBR bitrate is a hard limit. Normally, it can be violated for silence.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::vbr-max-bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,320]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR max bitrate</NICK> -<BLURB>Specify maximum VBR bitrate (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::vbr-mean-bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,320]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR mean bitrate</NICK> -<BLURB>Specify mean VBR bitrate.</BLURB> -<DEFAULT>128</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::vbr-min-bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,320]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR min bitrate</NICK> -<BLURB>Specify minimum VBR bitrate (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::vbr-quality</NAME> -<TYPE>GstLameQuality</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR Quality</NICK> -<BLURB>VBR Quality.</BLURB> -<DEFAULT>4</DEFAULT> -</ARG> - -<ARG> -<NAME>GstLame::xingheader</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Output Xing Header</NICK> -<BLURB>Output Xing Header (BROKEN, use xingmux instead).</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::blocksize</NAME> -<TYPE>gulong</TYPE> -<RANGE>>= 1</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Block size</NICK> -<BLURB>Size in bytes to output per buffer.</BLURB> -<DEFAULT></DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::clock</NAME> -<TYPE>GstSidClock</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>clock</NICK> -<BLURB>clock.</BLURB> -<DEFAULT>PAL</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::filter</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>filter</NICK> -<BLURB>filter.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::force-speed</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>force_speed</NICK> -<BLURB>force_speed.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::measured-volume</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>measured_volume</NICK> -<BLURB>measured_volume.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::memory</NAME> -<TYPE>GstSidMemory</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>memory</NICK> -<BLURB>memory.</BLURB> -<DEFAULT>Bank Switching</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::metadata</NAME> -<TYPE>GstCaps*</TYPE> -<RANGE></RANGE> -<FLAGS>r</FLAGS> -<NICK>Metadata</NICK> -<BLURB>Metadata.</BLURB> -<DEFAULT></DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::mos8580</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>mos8580</NICK> -<BLURB>mos8580.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstSidDec::tune</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,100]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>tune</NICK> -<BLURB>tune.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::ath-level</NAME> -<TYPE>gfloat</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>ATH Level</NICK> -<BLURB>ATH Level in dB.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[8,384]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Bitrate (kb/s)</NICK> -<BLURB>Bitrate in kbit/sec (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, 320, 384).</BLURB> -<DEFAULT>192</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::copyright</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Copyright</NICK> -<BLURB>Mark as copyright.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::emphasis</NAME> -<TYPE>GstTwoLameEmphasis</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Emphasis</NICK> -<BLURB>Pre-emphasis to apply to the decoded audio.</BLURB> -<DEFAULT>No emphasis</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::energy-level-extension</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Energy Level Extension</NICK> -<BLURB>Write peak PCM level to each frame.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::error-protection</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Error protection</NICK> -<BLURB>Adds checksum to every frame.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::mode</NAME> -<TYPE>GstTwoLameMode</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Mode</NICK> -<BLURB>Encoding mode.</BLURB> -<DEFAULT>Joint Stereo</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::original</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Original</NICK> -<BLURB>Mark as original.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::padding</NAME> -<TYPE>GstTwoLamePadding</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Padding</NICK> -<BLURB>Padding type.</BLURB> -<DEFAULT>No Padding</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::psymodel</NAME> -<TYPE>gint</TYPE> -<RANGE>[G_MAXULONG,4]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Psychoacoustic Model</NICK> -<BLURB>Psychoacoustic model used to encode the audio.</BLURB> -<DEFAULT>3</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::quick-mode</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Quick mode</NICK> -<BLURB>Calculate Psymodel every frames.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::quick-mode-count</NAME> -<TYPE>gint</TYPE> -<RANGE>>= 0</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Quick mode count</NICK> -<BLURB>Calculate Psymodel every n frames.</BLURB> -<DEFAULT>10</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::vbr</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR</NICK> -<BLURB>Enable variable bitrate mode.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::vbr-level</NAME> -<TYPE>gfloat</TYPE> -<RANGE>[-10,10]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR Level</NICK> -<BLURB>VBR Level.</BLURB> -<DEFAULT>5</DEFAULT> -</ARG> - -<ARG> -<NAME>GstTwoLame::vbr-max-bitrate</NAME> -<TYPE>gint</TYPE> -<RANGE>[0,384]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBR max bitrate</NICK> -<BLURB>Specify maximum VBR bitrate (0=off, 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256, 320, 384).</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::analyse</NAME> -<TYPE>GstX264EncAnalyse</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Analyse</NICK> -<BLURB>Partitions to consider.</BLURB> -<DEFAULT></DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::b-adapt</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>B-Adapt</NICK> -<BLURB>Automatically decide how many B-frames to use.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::b-pyramid</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>B-Pyramid</NICK> -<BLURB>Keep some B-frames as references.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::bframes</NAME> -<TYPE>guint</TYPE> -<RANGE><= 4</RANGE> -<FLAGS>rw</FLAGS> -<NICK>B-Frames</NICK> -<BLURB>Number of B-frames between I and P.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::bitrate</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,102400]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Bitrate</NICK> -<BLURB>Bitrate in kbit/sec.</BLURB> -<DEFAULT>2048</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::byte-stream</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Byte Stream</NICK> -<BLURB>Generate byte stream format of NALU.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::cabac</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Use CABAC</NICK> -<BLURB>Enable CABAC entropy coding.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::dct8x8</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>DCT8x8</NICK> -<BLURB>Adaptive spatial transform size.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::interlaced</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Interlaced</NICK> -<BLURB>Interlaced material.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::ip-factor</NAME> -<TYPE>gfloat</TYPE> -<RANGE>[0,2]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>IP-Factor</NICK> -<BLURB>Quantizer factor between I- and P-frames.</BLURB> -<DEFAULT>1.4</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::key-int-max</NAME> -<TYPE>guint</TYPE> -<RANGE><= G_MAXINT</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Key-frame maximal interval</NICK> -<BLURB>Maximal distance between two key-frames (0 for automatic).</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::me</NAME> -<TYPE>GstX264EncMe</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Motion Estimation</NICK> -<BLURB>Integer pixel motion estimation method.</BLURB> -<DEFAULT>hexagonal search, radius 2</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::multipass-cache-file</NAME> -<TYPE>gchar*</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Multipass Cache File</NICK> -<BLURB>Filename for multipass cache file.</BLURB> -<DEFAULT>"x264.log"</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::noise-reduction</NAME> -<TYPE>guint</TYPE> -<RANGE><= 100000</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Noise Reducation</NICK> -<BLURB>Noise reduction strength.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::pass</NAME> -<TYPE>GstX264EncPass</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Encoding pass/type</NICK> -<BLURB>Encoding pass/type.</BLURB> -<DEFAULT>Constant Bitrate Encoding</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::pb-factor</NAME> -<TYPE>gfloat</TYPE> -<RANGE>[0,2]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>PB-Factor</NICK> -<BLURB>Quantizer factor between P- and B-frames.</BLURB> -<DEFAULT>1.3</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::qp-max</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,51]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Maximum Quantizer</NICK> -<BLURB>Maximum quantizer.</BLURB> -<DEFAULT>51</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::qp-min</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,51]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Minimum Quantizer</NICK> -<BLURB>Minimum quantizer.</BLURB> -<DEFAULT>10</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::qp-step</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,50]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Maximum Quantizer Difference</NICK> -<BLURB>Maximum quantizer difference between frames.</BLURB> -<DEFAULT>4</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::quantizer</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,50]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Constant Quantizer</NICK> -<BLURB>Constant quantizer or quality to apply.</BLURB> -<DEFAULT>21</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::ref</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,12]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Reference Frames</NICK> -<BLURB>Number of reference frames.</BLURB> -<DEFAULT>1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::sps-id</NAME> -<TYPE>guint</TYPE> -<RANGE><= 31</RANGE> -<FLAGS>rw</FLAGS> -<NICK>SPS ID</NICK> -<BLURB>SPS and PPS ID number.</BLURB> -<DEFAULT>0</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::stats-file</NAME> -<TYPE>gchar*</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Stats File</NICK> -<BLURB>Filename for multipass statistics (deprecated, use multipass-stats-file).</BLURB> -<DEFAULT>"x264.log"</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::subme</NAME> -<TYPE>guint</TYPE> -<RANGE>[1,6]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Subpixel Motion Estimation</NICK> -<BLURB>Subpixel motion estimation and partition decision quality: 1=fast, 6=best.</BLURB> -<DEFAULT>1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::threads</NAME> -<TYPE>guint</TYPE> -<RANGE><= 4</RANGE> -<FLAGS>rw</FLAGS> -<NICK>Threads</NICK> -<BLURB>Number of threads used by the codec (0 for automatic).</BLURB> -<DEFAULT>1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::trellis</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Trellis quantization</NICK> -<BLURB>Enable trellis searched quantization.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::vbv-buf-capacity</NAME> -<TYPE>guint</TYPE> -<RANGE>[300,10000]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>VBV buffer capacity</NICK> -<BLURB>Size of the VBV buffer in milliseconds.</BLURB> -<DEFAULT>600</DEFAULT> -</ARG> - -<ARG> -<NAME>GstX264Enc::weightb</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Weighted B-Frames</NICK> -<BLURB>Weighted prediction for B-frames.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMad::half</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Half</NICK> -<BLURB>Generate PCM at 1/2 sample rate.</BLURB> -<DEFAULT>FALSE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstMad::ignore-crc</NAME> -<TYPE>gboolean</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Ignore CRC</NICK> -<BLURB>Ignore CRC errors.</BLURB> -<DEFAULT>TRUE</DEFAULT> -</ARG> - -<ARG> -<NAME>GstDvdReadSrc::angle</NAME> -<TYPE>gint</TYPE> -<RANGE>[1,999]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>angle</NICK> -<BLURB>angle.</BLURB> -<DEFAULT>1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstDvdReadSrc::chapter</NAME> -<TYPE>gint</TYPE> -<RANGE>[1,999]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>chapter</NICK> -<BLURB>chapter.</BLURB> -<DEFAULT>1</DEFAULT> -</ARG> - -<ARG> -<NAME>GstDvdReadSrc::device</NAME> -<TYPE>gchar*</TYPE> -<RANGE></RANGE> -<FLAGS>rw</FLAGS> -<NICK>Device</NICK> -<BLURB>DVD device location.</BLURB> -<DEFAULT>NULL</DEFAULT> -</ARG> - -<ARG> -<NAME>GstDvdReadSrc::title</NAME> -<TYPE>gint</TYPE> -<RANGE>[1,999]</RANGE> -<FLAGS>rw</FLAGS> -<NICK>title</NICK> -<BLURB>title.</BLURB> -<DEFAULT>1</DEFAULT> -</ARG> - diff --git a/docs/plugins/gst-plugins-ugly-plugins.signals.new b/docs/plugins/gst-plugins-ugly-plugins.signals.new deleted file mode 100644 index 81551902..00000000 --- a/docs/plugins/gst-plugins-ugly-plugins.signals.new +++ /dev/null @@ -1,50 +0,0 @@ -<SIGNAL> -<NAME>GstRDTManager::clear-pt-map</NAME> -<RETURNS>void</RETURNS> -<FLAGS>l</FLAGS> -GstRDTManager *gstrdtmanager -</SIGNAL> - -<SIGNAL> -<NAME>GstRDTManager::on-bye-ssrc</NAME> -<RETURNS>void</RETURNS> -<FLAGS>l</FLAGS> -GstRDTManager *gstrdtmanager -guint arg1 -guint arg2 -</SIGNAL> - -<SIGNAL> -<NAME>GstRDTManager::on-bye-timeout</NAME> -<RETURNS>void</RETURNS> -<FLAGS>l</FLAGS> -GstRDTManager *gstrdtmanager -guint arg1 -guint arg2 -</SIGNAL> - -<SIGNAL> -<NAME>GstRDTManager::on-timeout</NAME> -<RETURNS>void</RETURNS> -<FLAGS>l</FLAGS> -GstRDTManager *gstrdtmanager -guint arg1 -guint arg2 -</SIGNAL> - -<SIGNAL> -<NAME>GstRDTManager::request-pt-map</NAME> -<RETURNS>GstCaps*</RETURNS> -<FLAGS>l</FLAGS> -GstRDTManager *gstrdtmanager -guint arg1 -guint arg2 -</SIGNAL> - -<SIGNAL> -<NAME>GstMPEGParse::reached-offset</NAME> -<RETURNS>void</RETURNS> -<FLAGS>f</FLAGS> -GstMPEGParse *gstmpegparse -</SIGNAL> - |