From c4ec1f0353b342473b93637fd0c3fb524bedbb2d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 2 May 2018 16:57:54 +1000 Subject: powerpc/64: Remove unused paca->soft_enabled In commit 4e26bc4a4ed6 ("powerpc/64: Rename soft_enabled to irq_soft_mask") we renamed paca->soft_enabled. But then in commit 8e0b634b1327 ("powerpc/64s: Do not allocate lppaca if we are not virtualized") we added it back. Oops. This happened because the two patches were in flight at the same time and rebased vs each other multiple times, and we missed it in review. Fixes: 8e0b634b1327 ("powerpc/64s: Do not allocate lppaca if we are not virtualized") Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/paca.h | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 4185f1c96125..3f109a3e3edb 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -165,7 +165,6 @@ struct paca_struct { u64 saved_msr; /* MSR saved here by enter_rtas */ u16 trap_save; /* Used when bad stack is encountered */ u8 irq_soft_mask; /* mask for irq soft masking */ - u8 soft_enabled; /* irq soft-enable flag */ u8 irq_happened; /* irq happened while soft-disabled */ u8 io_sync; /* writel() needs spin_unlock sync */ u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */ -- cgit v1.2.3 From 0b7758aaf6543b9a10c8671db559e9d374a3fd95 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Fri, 4 May 2018 18:44:24 +0530 Subject: powerpc/trace/syscalls: Update syscall name matching logic On powerpc64 ABIv1, we are enabling syscall tracing for only ~20 syscalls. This is due to commit e145242ea0df6 ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention") which has changed the syscall entry wrapper prefix from "SyS" to "__se_sys". Update the logic for ABIv1 to not just skip the initial dot, but also the "__se_sys" prefix. Fixes: commit e145242ea0df6 ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention") Reported-by: Michael Ellerman Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/ftrace.h | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index 9abddde372ab..24103fa57b54 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -73,13 +73,9 @@ struct dyn_arch_ftrace { #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) { - /* - * Compare the symbol name with the system call name. Skip the .sys or .SyS - * prefix from the symbol name and the sys prefix from the system call name and - * just match the rest. This is only needed on ppc64 since symbol names on - * 32bit do not start with a period so the generic function will work. - */ - return !strcmp(sym + 4, name + 3); + /* We need to skip past the initial dot, and the __se_sys alias */ + return !strcmp(sym + 1, name) || + (!strncmp(sym, ".__se_sys", 9) && !strcmp(sym + 6, name)); } #endif #endif /* CONFIG_FTRACE_SYSCALLS && !__ASSEMBLY__ */ -- cgit v1.2.3 From edf6a2dfe3889daf97e7c164891a87832169e3e4 Mon Sep 17 00:00:00 2001 From: "Naveen N. Rao" Date: Fri, 4 May 2018 18:44:25 +0530 Subject: powerpc/trace/syscalls: Update syscall name matching logic to account for ppc_ prefix Some syscall entry functions on powerpc are prefixed with ppc_/ppc32_/ppc64_ rather than the usual sys_/__se_sys prefix. fork(), clone(), swapcontext() are some examples of syscalls with such entry points. We need to match against these names when initializing ftrace syscall tracing. Signed-off-by: Naveen N. Rao Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/ftrace.h | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index 24103fa57b54..b2dabd06659d 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -69,13 +69,30 @@ struct dyn_arch_ftrace { #endif #if defined(CONFIG_FTRACE_SYSCALLS) && !defined(__ASSEMBLY__) -#ifdef PPC64_ELF_ABI_v1 +/* + * Some syscall entry functions on powerpc start with "ppc_" (fork and clone, + * for instance) or ppc32_/ppc64_. We should also match the sys_ variant with + * those. + */ #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME +#ifdef PPC64_ELF_ABI_v1 static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) { /* We need to skip past the initial dot, and the __se_sys alias */ return !strcmp(sym + 1, name) || - (!strncmp(sym, ".__se_sys", 9) && !strcmp(sym + 6, name)); + (!strncmp(sym, ".__se_sys", 9) && !strcmp(sym + 6, name)) || + (!strncmp(sym, ".ppc_", 5) && !strcmp(sym + 5, name + 4)) || + (!strncmp(sym, ".ppc32_", 7) && !strcmp(sym + 7, name + 4)) || + (!strncmp(sym, ".ppc64_", 7) && !strcmp(sym + 7, name + 4)); +} +#else +static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) +{ + return !strcmp(sym, name) || + (!strncmp(sym, "__se_sys", 8) && !strcmp(sym + 5, name)) || + (!strncmp(sym, "ppc_", 4) && !strcmp(sym + 4, name + 4)) || + (!strncmp(sym, "ppc32_", 6) && !strcmp(sym + 6, name + 4)) || + (!strncmp(sym, "ppc64_", 6) && !strcmp(sym + 6, name + 4)); } #endif #endif /* CONFIG_FTRACE_SYSCALLS && !__ASSEMBLY__ */ -- cgit v1.2.3 From 6c0a8f6b5a45ac892a763b6299bd3c5324fc5e02 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 8 May 2018 14:59:56 +1000 Subject: powerpc/pseries: Fix CONFIG_NUMA=n build The build is failing with CONFIG_NUMA=n and some compiler versions: arch/powerpc/platforms/pseries/hotplug-cpu.o: In function `dlpar_online_cpu': hotplug-cpu.c:(.text+0x12c): undefined reference to `timed_topology_update' arch/powerpc/platforms/pseries/hotplug-cpu.o: In function `dlpar_cpu_remove': hotplug-cpu.c:(.text+0x400): undefined reference to `timed_topology_update' Fix it by moving the empty version of timed_topology_update() into the existing #ifdef block, which has the right guard of SPLPAR && NUMA. Fixes: cee5405da402 ("powerpc/hotplug: Improve responsiveness of hotplug change") Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/topology.h | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 9f421641a35c..16b077801a5f 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -91,6 +91,7 @@ extern int start_topology_update(void); extern int stop_topology_update(void); extern int prrn_is_enabled(void); extern int find_and_online_cpu_nid(int cpu); +extern int timed_topology_update(int nsecs); #else static inline int start_topology_update(void) { @@ -108,16 +109,12 @@ static inline int find_and_online_cpu_nid(int cpu) { return 0; } +static inline int timed_topology_update(int nsecs) +{ + return 0; +} #endif /* CONFIG_NUMA && CONFIG_PPC_SPLPAR */ -#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_NEED_MULTIPLE_NODES) -#if defined(CONFIG_PPC_SPLPAR) -extern int timed_topology_update(int nsecs); -#else -#define timed_topology_update(nsecs) -#endif /* CONFIG_PPC_SPLPAR */ -#endif /* CONFIG_HOTPLUG_CPU || CONFIG_NEED_MULTIPLE_NODES */ - #include #ifdef CONFIG_SMP -- cgit v1.2.3