From 36df6fb6efa1e7c29debdba9bedff57c366b8347 Mon Sep 17 00:00:00 2001 From: Mahoda Ratnayaka Date: Fri, 31 Mar 2017 12:00:59 +1300 Subject: Documentation: dtb: lm87: Add hwmon binding documentation This patch adds lm87 hwmon device tree node documentation. Signed-off-by: Mahoda Ratnayaka Signed-off-by: Chris Packham Acked-by: Rob Herring Signed-off-by: Guenter Roeck --- Documentation/devicetree/bindings/hwmon/lm87.txt | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt (limited to 'Documentation/devicetree/bindings/hwmon') diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt new file mode 100644 index 000000000000..e1b79903f204 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lm87.txt @@ -0,0 +1,30 @@ +*LM87 hwmon sensor. + +Required properties: +- compatible: Should be + "ti,lm87" + +- reg: I2C address + +optional properties: +- has-temp3: This configures pins 18 and 19 to be used as a second + remote temperature sensing channel. By default the pins + are configured as voltage input pins in0 and in5. + +- has-in6: When set, pin 5 is configured to be used as voltage input + in6. Otherwise the pin is set as FAN1 input. + +- has-in7: When set, pin 6 is configured to be used as voltage input + in7. Otherwise the pin is set as FAN2 input. + +- vcc-supply: a Phandle for the regulator supplying power, can be + cofigured to measure 5.0V power supply. Default is 3.3V. + +Example: + +lm87@2e { + compatible = "ti,lm87"; + reg = <0x2e>; + has-temp3; + vcc-supply = <®_5v0>; +}; -- cgit v1.2.3