| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Because the previous two commit replaced the bpf_load implementation of
the user program with libbpf, the corresponding kernel program's MAP
definition can be replaced with new BTF-defined map syntax.
This commit only updates the samples which uses libbpf API for loading
bpf program not with bpf_load.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-6-danieltimlee@gmail.com
|
|
This commit adds tracex7 test file (testfile.img) to .gitignore which
comes from test_override_return.sh.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-5-danieltimlee@gmail.com
|
|
BPF tail call uses the BPF_MAP_TYPE_PROG_ARRAY type map for calling
into other BPF programs and this PROG_ARRAY should be filled prior to
use. Currently, samples with the PROG_ARRAY type MAP fill this program
array with bpf_load. For bpf_load to fill this map, kernel BPF program
must specify the section with specific format of <prog_type>/<array_idx>
(e.g. SEC("socket/0"))
But by using libbpf instead of bpf_load, user program can specify which
programs should be added to PROG_ARRAY. The advantage of this approach
is that you can selectively add only the programs you want, rather than
adding all of them to PROG_ARRAY, and it's much more intuitive than the
traditional approach.
This commit refactors user programs with the PROG_ARRAY type MAP with
libbpf instead of using bpf_load.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-4-danieltimlee@gmail.com
|
|
Currently, the kprobe BPF program attachment method for bpf_load is
quite old. The implementation of bpf_load "directly" controls and
manages(create, delete) the kprobe events of DEBUGFS. On the other hand,
using using the libbpf automatically manages the kprobe event.
(under bpf_link interface)
By calling bpf_program__attach(_kprobe) in libbpf, the corresponding
kprobe is created and the BPF program will be attached to this kprobe.
To remove this, by simply invoking bpf_link__destroy will clean up the
event.
This commit refactors kprobe tracing programs (tracex{1~7}_user.c) with
libbpf using bpf_link interface and bpf_program__attach.
tracex2_kern.c, which tracks system calls (sys_*), has been modified to
append prefix depending on architecture.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-3-danieltimlee@gmail.com
|
|
Current method of checking pointer error is not user friendly.
Especially the __must_check define makes this less intuitive.
Since, libbpf has an API libbpf_get_error() which checks pointer error,
this commit refactors existing pointer error check logic with libbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-2-danieltimlee@gmail.com
|
|
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
|
|
xdp_redirect_cpu is currently failing in bpf_prog_load_xattr()
allocating cpu_map map if CONFIG_NR_CPUS is less than 64 since
cpu_map_alloc() requires max_entries to be less than NR_CPUS.
Set cpu_map max_entries according to NR_CPUS in xdp_redirect_cpu_kern.c
and get currently running cpus in xdp_redirect_cpu_user.c
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/374472755001c260158c4e4b22f193bdd3c56fb7.1589300442.git.lorenzo@kernel.org
|
|
GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:
/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status
bpf_log_buf here seems to be a leftover, so removing it.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com
|
|
Commit 5fbc220862fc ("tools/libpf: Add offsetof/container_of macro
in bpf_helpers.h") added macros offsetof/container_of to
bpf_helpers.h. Unfortunately, it caused compilation warnings
below for a few samples/bpf programs:
In file included from /data/users/yhs/work/net-next/samples/bpf/sockex2_kern.c:4:
In file included from /data/users/yhs/work/net-next/include/uapi/linux/in.h:24:
In file included from /data/users/yhs/work/net-next/include/linux/socket.h:8:
In file included from /data/users/yhs/work/net-next/include/linux/uio.h:8:
/data/users/yhs/work/net-next/include/linux/kernel.h:992:9: warning: 'container_of' macro redefined [-Wmacro-redefined]
^
/data/users/yhs/work/net-next/tools/lib/bpf/bpf_helpers.h:46:9: note: previous definition is here
^
1 warning generated.
CLANG-bpf samples/bpf/sockex3_kern.o
In all these cases, bpf_helpers.h is included first, followed by other
standard headers. The macro container_of is defined unconditionally
in kernel.h, causing the compiler warning.
The fix is to move bpf_helpers.h after standard headers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180223.2949987-1-yhs@fb.com
|
|
As the example below shows, DECLARE_EVENT_CLASS() is used instead of
DEFINE_EVENT_CLASS().
Link: http://lkml.kernel.org/r/20200428214959.11259-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
- add SPDX header;
- adjust title markup;
- use bold markups on a few places;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
remap_vmalloc_range() has had various issues with the bounds checks it
promises to perform ("This function checks that addr is a valid
vmalloc'ed area, and that it is big enough to cover the vma") over time,
e.g.:
- not detecting pgoff<<PAGE_SHIFT overflow
- not detecting (pgoff<<PAGE_SHIFT)+usize overflow
- not checking whether addr and addr+(pgoff<<PAGE_SHIFT) are the same
vmalloc allocation
- comparing a potentially wildly out-of-bounds pointer with the end of
the vmalloc region
In particular, since commit fc9702273e2e ("bpf: Add mmap() support for
BPF_MAP_TYPE_ARRAY"), unprivileged users can cause kernel null pointer
dereferences by calling mmap() on a BPF map with a size that is bigger
than the distance from the start of the BPF map to the end of the
address space.
This could theoretically be used as a kernel ASLR bypass, by using
whether mmap() with a given offset oopses or returns an error code to
perform a binary search over the possible address range.
To allow remap_vmalloc_range_partial() to verify that addr and
addr+(pgoff<<PAGE_SHIFT) are in the same vmalloc region, pass the offset
to remap_vmalloc_range_partial() instead of adding it to the pointer in
remap_vmalloc_range().
In remap_vmalloc_range_partial(), fix the check against
get_vm_area_size() by using size comparisons instead of pointer
comparisons, and add checks for pgoff.
Fixes: 833423143c3a ("[PATCH] mm: introduce remap_vmalloc_range()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Link: http://lkml.kernel.org/r/20200415222312.236431-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The 'data_breakpoint' test code is the only modular user of
kallsyms_lookup_name(), which was exported as part of fixing the test in
f60d24d2ad04 ("hw-breakpoints: Fix broken hw-breakpoint sample module").
In preparation for un-exporting this symbol, switch the test over to using
__symbol_get(), which can be used to place breakpoints on exported
symbols.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/20200221114404.14641-3-will@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()".
Despite having just a single modular in-tree user that I could spot,
kallsyms_lookup_name() is exported to modules and provides a mechanism
for out-of-tree modules to access and invoke arbitrary, non-exported
kernel symbols when kallsyms is enabled.
This patch series fixes up that one user and unexports the symbol along
with kallsyms_on_each_symbol(), since that could also be abused in a
similar manner.
I would like to avoid out-of-tree modules being easily able to call
functions that are not exported. kallsyms_lookup_name() makes this
trivial to the point that there is very little incentive to rework these
modules to either use upstream interfaces correctly or propose
functionality which may be otherwise missing upstream. Both of these
latter solutions would be pre-requisites to upstreaming these modules, and
the current state of things actively discourages that approach.
The background here is that we are aiming for Android devices to be able
to use a generic binary kernel image closely following upstream, with any
vendor extensions coming in as kernel modules. In this case, we (Google)
end up maintaining the binary module ABI within the scope of a single LTS
kernel. Monitoring and managing the ABI surface is not feasible if it
effectively includes all data and functions via kallsyms_lookup_name().
Of course, we could just carry this patch in the Android kernel tree, but
we're aiming to carry as little as possible (ideally nothing) and I think
it's a sensible change in its own right. I'm surprised you object to it,
in all honesty.
Now, you could turn around and say "that's not upstream's problem", but it
still seems highly undesirable to me to have an upstream bypass for
exported symbols that isn't even used by upstream modules. It's ripe for
abuse and encourages people to work outside of the upstream tree. The
usual rule is that we don't export symbols without a user in the tree and
that seems especially relevant in this case.
Joe Lawrence said:
: FWIW, kallsyms was historically used by the out-of-tree kpatch support
: module to resolve external symbols as well as call set_memory_r{w,o}()
: API. All of that support code has been merged upstream, so modern kpatch
: modules* no longer leverage kallsyms by default.
:
: That said, there are still some users who still use the deprecated support
: module with newer kernels, but that is not officially supported by the
: project.
This patch (of 3):
Given the name of a kernel symbol, the 'data_breakpoint' test claims to
"report any write operations on the kernel symbol". However, it creates
the breakpoint using both HW_BREAKPOINT_W and HW_BREAKPOINT_R, which menas
it also fires for read access.
Drop HW_BREAKPOINT_R from the breakpoint attributes.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/20200221114404.14641-2-will@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bpf_program__attach of libbpf(using bpf_link) is much more intuitive
than the previous method using ioctl.
bpf_program__attach_perf_event manages the enable of perf_event and
attach of BPF programs to it, so there's no neeed to do this
directly with ioctl.
In addition, bpf_link provides consistency in the use of API because it
allows disable (detach, destroy) for multiple events to be treated as
one bpf_link__destroy. Also, bpf_link__destroy manages the close() of
perf_event fd.
This commit refactors samples that attach the bpf program to perf_event
by using libbbpf instead of ioctl. Also the bpf_load in the samples were
removed and migrated to use libbbpf API.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200321100424.1593964-3-danieltimlee@gmail.com
|
|
To reduce the reliance of trace samples (trace*_user) on bpf_load,
move read_trace_pipe to trace_helpers. By moving this bpf_loader helper
elsewhere, trace functions can be easily migrated to libbbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200321100424.1593964-2-danieltimlee@gmail.com
|
|
We currently have the following devnode types:
enum vfl_devnode_type {
VFL_TYPE_GRABBER = 0,
VFL_TYPE_VBI,
VFL_TYPE_RADIO,
VFL_TYPE_SUBDEV,
VFL_TYPE_SDR,
VFL_TYPE_TOUCH,
VFL_TYPE_MAX /* Shall be the last one */
};
They all make sense, except for the first: GRABBER really refers to /dev/videoX
devices, which can be capture, output or m2m, so 'grabber' doesn't even refer to
their function anymore.
Let's call a spade a spade and rename this to VFL_TYPE_VIDEO.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-02-07
The following pull-request contains BPF updates for your *net* tree.
We've added 15 non-merge commits during the last 10 day(s) which contain
a total of 12 files changed, 114 insertions(+), 31 deletions(-).
The main changes are:
1) Various BPF sockmap fixes related to RCU handling in the map's tear-
down code, from Jakub Sitnicki.
2) Fix macro state explosion in BPF sk_storage map when calculating its
bucket_log on allocation, from Martin KaFai Lau.
3) Fix potential BPF sockmap update race by rechecking socket's established
state under lock, from Lorenz Bauer.
4) Fix crash in bpftool on missing xlated instructions when kptr_restrict
sysctl is set, from Toke Høiland-Jørgensen.
5) Fix i40e's XSK wakeup code to return proper error in busy state and
various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski.
6) Fix the way modifiers are skipped in BTF in the verifier while walking
pointers to avoid program rejection, from Alexei Starovoitov.
7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and
ii) to fix undefined reference linker errors for older gcc version due to
order of passed gcc parameters, from Yulia Kartseva and Song Liu.
8) Fix a trampoline_count BPF kselftest warning about missing braces around
initializer, from Andrii Nakryiko.
9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in
bpftool, from Michal Rostecki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ndo_xsk_wakeup() can return -ENETDOWN and there's no particular reason
to bail the whole application out on that case. Let's check in kick_tx()
whether errno was set to mentioned value and basically allow application
to further process frames.
Fixes: 248c7f9c0e21 ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access")
Reported-by: Cameron Elliott <cameron@cameronelliott.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-4-maciej.fijalkowski@intel.com
|
|
Seems that by accident there is a doubled declaration of global variable
opt_xdp_bind_flags in xdpsock_user.c. The second one is uninitialized so
compiler was simply ignoring it.
To keep things clean, drop the doubled variable.
Fixes: c543f5469822 ("samples/bpf: add unaligned chunks mode support to xdpsock")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-3-maciej.fijalkowski@intel.com
|
|
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.
Conversion rule is:
llseek => proc_lseek
unlocked_ioctl => proc_ioctl
xxx => proc_xxx
delete ".owner = THIS_MODULE" line
[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
"Three objtool fixes, plus marking SFI as obsolete"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Skip samples subdirectory
objtool: Fix ARCH=x86_64 build error
objtool: Silence build output
MAINTAINERS: Mark simple firmware interface (SFI) obsolete
|
|
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Jiri Kosina:
"Fixes for selftests and samples for 'shadow variables' livepatching
feature, from Petr Mladek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Handle allocation failure in the sample of shadow variable API
livepatch/samples/selftest: Use klp_shadow_alloc() API correctly
livepatch/selftest: Clean up shadow variable names and type
livepatch/sample: Use the right type for the leaking data pointer
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The code in the 'samples' subdirectory isn't part of the kernel, so
there's no need to validate it.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/c4cb4ef635ec606454ab834cb49fc3e9381fb1b1.1579543924.git.jpoimboe@redhat.com
|
|
Fix all files in samples/bpf to include libbpf header files with the bpf/
prefix, to be consistent with external users of the library. Also ensure
that all includes of exported libbpf header files (those that are exported
on 'make install' of the library) use bracketed includes instead of quoted.
To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.
Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560911.1683545.8795966751309534150.stgit@toke.dk
|
|
The 'clean' rule in the samples/bpf Makefile tries to remove backup
files (ending in ~). However, if no such files exist, it will instead try
to remove the user's home directory. While the attempt is mostly harmless,
it does lead to a somewhat scary warning like this:
rm: cannot remove '~': Is a directory
Fix this by using find instead of shell expansion to locate any actual
backup files that need to be removed.
Fixes: b62a796c109c ("samples/bpf: allow make to be run from samples/bpf/ directory")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/157952560126.1683545.7273054725976032511.stgit@toke.dk
|
|
msm needs 5.5-rc4, go to the latest.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
klp_shadow_alloc() is not handled in the sample of shadow variable API.
It is not strictly necessary because livepatch_fix1_dummy_free() is
able to handle the potential failure. But it is an example and it should
use the API a clean way.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The commit e91c2518a5d22a ("livepatch: Initialize shadow variables
safely by a custom callback") leads to the following static checker
warning:
samples/livepatch/livepatch-shadow-fix1.c:86 livepatch_fix1_dummy_alloc()
error: 'klp_shadow_alloc()' 'leak' too small (4 vs 8)
It is because klp_shadow_alloc() is used a wrong way:
int *leak;
shadow_leak = klp_shadow_alloc(d, SV_LEAK, sizeof(leak), GFP_KERNEL,
shadow_leak_ctor, leak);
The code is supposed to store the "leak" pointer into the shadow variable.
3rd parameter correctly passes size of the data (size of pointer). But
the 5th parameter is wrong. It should pass pointer to the data (pointer
to the pointer) but it passes the pointer directly.
It works because shadow_leak_ctor() handle "ctor_data" as the data
instead of pointer to the data. But it is semantically wrong and
confusing.
The same problem is also in the module used by selftests. In this case,
"pvX" variables are introduced. They represent the data stored in
the shadow variables.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The "leak" pointer, in the sample of shadow variable API, is allocated
as sizeof(int). Let's help developers and static analyzers with
understanding the code by using the appropriate pointer type.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Now that we don't have a reference to a devmap when flushing the device
bulk queue, let's change the the devmap_xmit tracepoint to remote the
map_id and map_index fields entirely. Rearrange the fields so 'drops' and
'sent' stay in the same position in the tracepoint struct, to make it
possible for the xdp_monitor utility to read both the old and the new
format.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157918768613.1458396.9165902403373826572.stgit@toke.dk
|
|
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sizes by which seccomp_notif and seccomp_notif_resp are allocated are
based on the SECCOMP_GET_NOTIF_SIZES ioctl. This allows for graceful
extension of these datastructures. If userspace zeroes out the
datastructure based on its version, and it is lagging behind the kernel's
version, it will end up sending trailing garbage. On the other hand,
if it is ahead of the kernel version, it will write extra zero space,
and potentially cause corruption.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191230203503.4925-1-sargun@sargun.me
Fixes: fec7b6690541 ("samples: add an example of seccomp user trap")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
|
|
trace_printk schedules work via irq_work_queue(), but doesn't
wait until it was processed. The kprobe_module.tc testcase does:
:;: "Load module again, which means the event1 should be recorded";:
modprobe trace-printk
grep "event1:" trace
so the grep which checks the trace file might run before the irq work
was processed. Fix this by adding a irq_work_sync().
Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-3-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: af2a0750f3749 ("selftests/ftrace: Improve kprobe on module testcase to load/unload module")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
When sample xdp_redirect_cpu was converted to use libbpf, the
tracepoints used by this sample were not getting attached automatically
like with bpf_load.c. The BPF-maps was still getting loaded, thus
nobody notice that the tracepoints were not updating these maps.
This fix doesn't use the new skeleton code, as this bug was introduced
in v5.1 and stable might want to backport this. E.g. Red Hat QA uses
this sample as part of their testing.
Fixes: bbaf6029c49c ("samples/bpf: Convert XDP samples to libbpf usage")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157685877642.26195.2798780195186786841.stgit@firesoul
|
|
The UDP payload fill pattern can be specified using '-P' or '--tx-pkt-pattern'
option. It is an unsigned 32 bit field and defaulted to 0x12345678.
The IP and UDP checksum is calculated by the code as per the content of
the packet before transmission.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-7-jay.jayatheerthan@intel.com
|
|
New option '-s' or '--tx-pkt-size' has been added to specify the transmit
packet size. The packet size ranges from 47 to 4096 bytes. When this
option is not provided, it defaults to 64 byte packet.
The code uses struct ethhdr, struct iphdr and struct udphdr to form the
transmit packet. The MAC address, IP address and UDP ports are set to default
values.
The code calculates IP and UDP checksums before sending the packet.
Checksum calculation code in Linux kernel is used for this purpose.
The Ethernet FCS is not filled by the code.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-6-jay.jayatheerthan@intel.com
|
|
Use '-C' or '--tx-pkt-count' to specify number of packets to send.
If it is not specified, the application sends packets forever. If packet
count is not a multiple of batch size, last batch sent is less than the
batch size.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-5-jay.jayatheerthan@intel.com
|
|
New option to specify batch size for tx, rx and l2fwd has been added. This
allows fine tuning to maximize performance. It is specified using '-b' or
'--batch_size' options. When not specified default is 64.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191220085530.4980-4-jay.jayatheerthan@intel.com
|
