summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2022-01-15mm: introduce memalloc_retry_wait()NeilBrown1-1/+2
Various places in the kernel - largely in filesystems - respond to a memory allocation failure by looping around and re-trying. Some of these cannot conveniently use __GFP_NOFAIL, for reasons such as: - a GFP_ATOMIC allocation, which __GFP_NOFAIL doesn't work on - a need to check for the process being signalled between failures - the possibility that other recovery actions could be performed - the allocation is quite deep in support code, and passing down an extra flag to say if __GFP_NOFAIL is wanted would be clumsy. Many of these currently use congestion_wait() which (in almost all cases) simply waits the given timeout - congestion isn't tracked for most devices. It isn't clear what the best delay is for loops, but it is clear that the various filesystems shouldn't be responsible for choosing a timeout. This patch introduces memalloc_retry_wait() with takes on that responsibility. Code that wants to retry a memory allocation can call this function passing the GFP flags that were used. It will wait however is appropriate. For now, it only considers __GFP_NORETRY and whatever gfpflags_allow_blocking() tests. If blocking is allowed without __GFP_NORETRY, then alloc_page either made some reclaim progress, or waited for a while, before failing. So there is no need for much further waiting. memalloc_retry_wait() will wait until the current jiffie ends. If this condition is not met, then alloc_page() won't have waited much if at all. In that case memalloc_retry_wait() waits about 200ms. This is the delay that most current loops uses. linux/sched/mm.h needs to be included in some files now, but linux/backing-dev.h does not. Link: https://lkml.kernel.org/r/163754371968.13692.1277530886009912421@noble.neil.brown.name Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <chao@kernel.org> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15mm: allow !GFP_KERNEL allocations for kvmallocMichal Hocko6-38/+11
Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by previous patches so we can allow the support for kvmalloc. This will allow some external users to simplify or completely remove their helpers. GFP_NOWAIT semantic hasn't been supported so far but it hasn't been explicitly documented so let's add a note about that. ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc. Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Neil Brown <neilb@suse.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-04Merge tag 'mac80211-for-net-2022-01-04' of ↵Jakub Kicinski4-82/+55
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two more changes: - mac80211: initialize a variable to avoid using it uninitialized - mac80211 mesh: put some data structures into the container to fix bugs with and not have to deal with allocation failures * tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh mac80211: initialize variable have_higher_than_11mbit ==================== Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-04mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_meshPavel Skripkin3-81/+54
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was in mesh_paths and mpp_paths being NULL. mesh_pathtbl_init() could fail in case of memory allocation failure, but nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to leaving 2 pointers as NULL. Syzbot has found null deref on exit path, but it could happen anywhere else, because code assumes these pointers are valid. Since all ieee80211_*_setup_sdata functions are void and do not fail, let's embedd mesh_paths and mpp_paths into parent struct to avoid adding error handling on higher levels and follow the pattern of others setup_sdata functions Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04mac80211: initialize variable have_higher_than_11mbitTom Rix1-1/+1
Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-04sch_qfq: prevent shift-out-of-bounds in qfq_init_qdiscEric Dumazet1-4/+2
tx_queue_len can be set to ~0U, we need to be more careful about overflows. __fls(0) is undefined, as this report shows: UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24 shift exponent 51770272 is too large for 32-bit type 'int' CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x280/0x370 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04netrom: fix copying in user data in nr_setsockoptChristoph Hellwig1-1/+1
This code used to copy in an unsigned long worth of data before the sockptr_t conversion, so restore that. Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04udp6: Use Segment Routing Header for dest address if presentAndrew Lunn1-1/+2
When finding the socket to report an error on, if the invoking packet is using Segment Routing, the IPv6 destination address is that of an intermediate router, not the end destination. Extract the ultimate destination address from the segment address. This change allows traceroute to function in the presence of Segment Routing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04icmp: ICMPV6: Examine invoking packet for Segment Route Headers.Andrew Lunn2-1/+35
RFC8754 says: ICMP error packets generated within the SR domain are sent to source nodes within the SR domain. The invoking packet in the ICMP error message may contain an SRH. Since the destination address of a packet with an SRH changes as each segment is processed, it may not be the destination used by the socket or application that generated the invoking packet. For the source of an invoking packet to process the ICMP error message, the ultimate destination address of the IPv6 header may be required. The following logic is used to determine the destination address for use by protocol-error handlers. * Walk all extension headers of the invoking IPv6 packet to the routing extension header preceding the upper-layer header. - If routing header is type 4 Segment Routing Header (SRH) o The SID at Segment List[0] may be used as the destination address of the invoking packet. Mangle the skb so the network header points to the invoking packet inside the ICMP packet. The seg6 helpers can then be used on the skb to find any segment routing headers. If found, mark this fact in the IPv6 control block of the skb, and store the offset into the packet of the SRH. Then restore the skb back to its old state. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04seg6: export get_srh() for ICMP handlingAndrew Lunn2-31/+31
An ICMP error message can contain in its message body part of an IPv6 packet which invoked the error. Such a packet might contain a segment router header. Export get_srh() so the ICMP code can make use of it. Since his changes the scope of the function from local to global, add the seg6_ prefix to keep the namespace clean. And move it into seg6.c so it is always available, not just when IPV6_SEG6_LWTUNNEL is enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03Merge tag 'batadv-net-pullrequest-20220103' of ↵Jakub Kicinski3-11/+21
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - avoid sending link-local multicast to multicast routers, by Linus Lüssing * tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge: batman-adv: mcast: don't send link-local multicast to mcast routers ==================== Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03ipv6: Do cleanup if attribute validation fails in multipath routeDavid Ahern1-5/+3
As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03ipv6: Continue processing multipath route even if gateway attribute is invalidDavid Ahern1-2/+5
ip6_route_multipath_del loop continues processing the multipath attribute even if delete of a nexthop path fails. For consistency, do the same if the gateway attribute is invalid. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-02sctp: hold endpoint before calling cb in sctp_transport_lookup_processXin Long2-32/+36
The same fix in commit 5ec7d18d1813 ("sctp: use call_rcu to free endpoint") is also needed for dumping one asoc and sock after the lookup. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02mctp: Remove only static neighbour on RTM_DELNEIGHGagan Kumar1-4/+5
Add neighbour source flag in mctp_neigh_remove(...) to allow removal of only static neighbours. This should be a no-op change and might be useful later when mctp can have MCTP_NEIGH_DISCOVER neighbours. Signed-off-by: Gagan Kumar <gagan1kumar.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02batman-adv: mcast: don't send link-local multicast to mcast routersLinus Lüssing3-11/+21
The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1cb9b ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2021-12-31net ticp:fix a kernel-infoleak in __tipc_sendmsg()Haimin Zhang1-0/+2
struct tipc_socket_addr.ref has a 4-byte hole,and __tipc_getname() currently copying it to user space,causing kernel-infoleak. BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33 BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33 _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] copy_to_user include/linux/uaccess.h:209 [inline] net/socket.c:287 move_addr_to_user+0x3f6/0x600 net/socket.c:287 net/socket.c:287 __sys_getpeername+0x470/0x6b0 net/socket.c:1987 net/socket.c:1987 __do_sys_getpeername net/socket.c:1997 [inline] __se_sys_getpeername net/socket.c:1994 [inline] __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: tipc_getname+0x575/0x5e0 net/tipc/socket.c:757 net/tipc/socket.c:757 __sys_getpeername+0x3b3/0x6b0 net/socket.c:1984 net/socket.c:1984 __do_sys_getpeername net/socket.c:1997 [inline] __se_sys_getpeername net/socket.c:1994 [inline] __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: msg_set_word net/tipc/msg.h:212 [inline] msg_set_destport net/tipc/msg.h:619 [inline] msg_set_word net/tipc/msg.h:212 [inline] net/tipc/socket.c:1486 msg_set_destport net/tipc/msg.h:619 [inline] net/tipc/socket.c:1486 __tipc_sendmsg+0x44fa/0x5890 net/tipc/socket.c:1486 net/tipc/socket.c:1486 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_sendmsg_nosec net/socket.c:704 [inline] net/socket.c:2409 sock_sendmsg net/socket.c:724 [inline] net/socket.c:2409 ____sys_sendmsg+0xe11/0x12c0 net/socket.c:2409 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] ___sys_sendmsg net/socket.c:2463 [inline] net/socket.c:2492 __sys_sendmsg+0x704/0x840 net/socket.c:2492 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __do_sys_sendmsg net/socket.c:2501 [inline] net/socket.c:2499 __se_sys_sendmsg net/socket.c:2499 [inline] net/socket.c:2499 __x64_sys_sendmsg+0xe2/0x120 net/socket.c:2499 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Local variable skaddr created at: __tipc_sendmsg+0x2d0/0x5890 net/tipc/socket.c:1419 net/tipc/socket.c:1419 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402 Bytes 4-7 of 16 are uninitialized Memory access of size 16 starts at ffff888113753e00 Data copied to user address 0000000020000280 Reported-by: syzbot+cdbd40e0c3ca02cae3b7@syzkaller.appspotmail.com Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/1640918123-14547-1-git-send-email-tcs.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-2/+2
Daniel Borkmann says: ==================== pull-request: bpf 2021-12-31 We've added 2 non-merge commits during the last 14 day(s) which contain a total of 2 files changed, 3 insertions(+), 3 deletions(-). The main changes are: 1) Revert of an earlier attempt to fix xsk's poll() behavior where it turned out that the fix for a rare problem made it much worse in general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper fix is coming early next year, so the revert is mainly to avoid slipping the behavior into 5.16.) 2) Minor misc spell fix in BPF selftests, from Colin Ian King. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Fix spelling mistake "tained" -> "tainted" Revert "xsk: Do not sleep in poll() when need_wakeup set" ==================== Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31lwtunnel: Validate RTA_ENCAP_TYPE attribute lengthDavid Ahern3-0/+11
lwtunnel_valid_encap_type_attr is used to validate encap attributes within a multipath route. Add length validation checking to the type. lwtunnel_valid_encap_type_attr is called converting attributes to fib{6,}_config struct which means it is used before fib_get_nhs, ip6_route_multipath_add, and ip6_route_multipath_del - other locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE attribute. Fixes: 9ed59592e3e3 ("lwtunnel: fix autoload of lwt modules") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv6: Check attribute length for RTA_GATEWAY when deleting multipath routeDavid Ahern1-1/+5
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a64ed5 ("ipv6: fix multipath route replace error recovery") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv6: Check attribute length for RTA_GATEWAY in multipath routeDavid Ahern1-1/+20
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as does the current nla_get_in6_addr. nla_memcpy protects against accessing memory greater than what is in the attribute, but there is no check requiring the attribute to have an IPv6 address. Add it. Fixes: 51ebd3181572 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv4: Check attribute length for RTA_FLOW in multipath routeDavid Ahern1-3/+14
Make sure RTA_FLOW is at least 4B before using. Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31ipv4: Check attribute length for RTA_GATEWAY in multipath routeDavid Ahern1-3/+26
syzbot reported uninit-value: ============================================================ BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453 fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224 inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886 Add helper to validate RTA_GATEWAY length before using the attribute. Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config") Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net/ncsi: check for error return from call to nla_put_u32Jiasheng Jiang1-1/+5
As we can see from the comment of the nla_put() that it could return -EMSGSIZE if the tailroom of the skb is insufficient. Therefore, it should be better to check the return value of the nla_put_u32 and return the error code if error accurs. Also, there are many other functions have the same problem, and if this patch is correct, I will commit a new version to fix all. Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helperNikolay Aleksandrov1-3/+3
We need to first check if the context is a vlan one, then we need to check the global bridge multicast vlan snooping flag, and finally the vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast processing (e.g. querier timers). Fixes: 7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: fix use-after-free in tw_timer_handlerMuchun Song1-6/+4
A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1 Fixes: 61a7e26028b9 ("mib: put net statistics on struct net") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Cong Wang <cong.wang@bytedance.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: add and enforce startup query interval minimumNikolay Aleksandrov5-3/+22
As reported[1] if startup query interval is set too low in combination with large number of startup queries and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the admin know that the startup interval has been set to the minimum. It doesn't make sense to make the startup interval lower than the normal query interval so use the same value of 1 second. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: bridge: mcast: add and enforce query interval minimumNikolay Aleksandrov5-3/+22
As reported[1] if query interval is set too low and we have multiple bridges or even a single bridge with multiple querier vlans configured we can crash the machine. Add a 1 second minimum which must be enforced by overwriting the value if set lower (i.e. without returning an error) to avoid breaking user-space. If that happens a log message is emitted to let the administrator know that the interval has been set to the minimum. The issue has been present since these intervals could be user-controlled. [1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/ Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29ipv6: raw: check passed optlen before readingTamir Duberstein1-0/+3
Add a check that the user-provided option is at least as long as the number of bytes we intend to read. Before this patch we would blindly read sizeof(int) bytes even in cases where the user passed optlen<sizeof(int), which would potentially read garbage or fault. Discovered by new tests in https://github.com/google/gvisor/pull/6957 . The original get_user call predates history in the git repo. Signed-off-by: Tamir Duberstein <tamird@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29xsk: Initialise xskb free_list_nodeCiara Loftus1-0/+1
This commit initialises the xskb's free_list_node when the xskb is allocated. This prevents a potential false negative returned from a call to list_empty for that node, such as the one introduced in commit 199d983bc015 ("xsk: Fix crash on double free in buffer pool") In my environment this issue caused packets to not be received by the xdpsock application if the traffic was running prior to application launch. This happened when the first batch of packets failed the xskmap lookup and XDP_PASS was returned from the bpf program. This action is handled in the i40e zc driver (and others) by allocating an skbuff, freeing the xdp_buff and adding the associated xskb to the xsk_buff_pool's free_list if it hadn't been added already. Without this fix, the xskb is not added to the free_list because the check to determine if it was added already returns an invalid positive result. Later, this caused allocation errors in the driver and the failure to receive packets. Fixes: 199d983bc015 ("xsk: Fix crash on double free in buffer pool") Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API") Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-28net/smc: fix kernel panic caused by race of smc_sockDust Li8-76/+57
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released. Fixes: 5f08318f617b ("smc: connection data control (CDC)") Reported-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28net/smc: don't send CDC/LLC message if link not readyDust Li5-5/+11
We found smc_llc_send_link_delete_all() sometimes wait for 2s timeout when testing with RDMA link up/down. It is possible when a smc_link is in ACTIVATING state, the underlaying QP is still in RESET or RTR state, which cannot send any messages out. smc_llc_send_link_delete_all() use smc_link_usable() to checks whether the link is usable, if the QP is still in RESET or RTR state, but the smc_link is in ACTIVATING, this LLC message will always fail without any CQE entering the CQ, and we will always wait 2s before timeout. Since we cannot send any messages through the QP before the QP enter RTS. I add a wrapper smc_link_sendable() which checks the state of QP along with the link state. And replace smc_link_usable() with smc_link_sendable() in all LLC & CDC message sending routine. Fixes: 5f08318f617b ("smc: connection data control (CDC)") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: udp: fix alignment problem in udp4_seq_show()yangxingwu1-1/+1
$ cat /pro/net/udp before: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 after: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 Signed-off-by: yangxingwu <xingwu.yang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net/smc: fix using of uninitialized completionsKarsten Graul1-2/+4
In smc_wr_tx_send_wait() the completion on index specified by pend->idx is initialized and after smc_wr_tx_send() was called the wait for completion starts. pend->idx is used to get the correct index for the wait, but the pend structure could already be cleared in smc_wr_tx_process_cqe(). Introduce pnd_idx to hold and use a local copy of the correct index. Fixes: 09c61d24f96d ("net/smc: wait for departure of an IB message") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivateWilliam Zhao1-0/+2
The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 </TASK> =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao <wizhao@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-25sctp: use call_rcu to free endpointXin Long3-22/+36
This patch is to delay the endpoint free by calling call_rcu() to fix another use-after-free issue in sctp_sock_dump(): BUG: KASAN: use-after-free in __lock_acquire+0x36d9/0x4c20 Call Trace: __lock_acquire+0x36d9/0x4c20 kernel/locking/lockdep.c:3218 lock_acquire+0x1ed/0x520 kernel/locking/lockdep.c:3844 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:168 spin_lock_bh include/linux/spinlock.h:334 [inline] __lock_sock+0x203/0x350 net/core/sock.c:2253 lock_sock_nested+0xfe/0x120 net/core/sock.c:2774 lock_sock include/net/sock.h:1492 [inline] sctp_sock_dump+0x122/0xb20 net/sctp/diag.c:324 sctp_for_each_transport+0x2b5/0x370 net/sctp/socket.c:5091 sctp_diag_dump+0x3ac/0x660 net/sctp/diag.c:527 __inet_diag_dump+0xa8/0x140 net/ipv4/inet_diag.c:1049 inet_diag_dump+0x9b/0x110 net/ipv4/inet_diag.c:1065 netlink_dump+0x606/0x1080 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x59a/0x7c0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] inet_diag_handler_cmd+0x2ce/0x3f0 net/ipv4/inet_diag.c:1170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x31d/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2477 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:274 This issue occurs when asoc is peeled off and the old sk is freed after getting it by asoc->base.sk and before calling lock_sock(sk). To prevent the sk free, as a holder of the sk, ep should be alive when calling lock_sock(). This patch uses call_rcu() and moves sock_put and ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to hold the ep under rcu_read_lock in sctp_transport_traverse_process(). If sctp_endpoint_hold() returns true, it means this ep is still alive and we have held it and can continue to dump it; If it returns false, it means this ep is dead and can be freed after rcu_read_unlock, and we should skip it. In sctp_sock_dump(), after locking the sk, if this ep is different from tsp->asoc->ep, it means during this dumping, this asoc was peeled off before calling lock_sock(), and the sk should be skipped; If this ep is the same with tsp->asoc->ep, it means no peeloff happens on this asoc, and due to lock_sock, no peeloff will happen either until release_sock. Note that delaying endpoint free won't delay the port release, as the port release happens in sctp_endpoint_destroy() before calling call_rcu(). Also, freeing endpoint by call_rcu() makes it safe to access the sk by asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv(). Thanks Jones to bring this issue up. v1->v2: - improve the changelog. - add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed. Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com Reported-by: Lee Jones <lee.jones@linaro.org> Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-23udp: using datalen to cap ipv6 udp max gso segmentsCoco Li1-1/+1
The max number of UDP gso segments is intended to cap to UDP_MAX_SEGMENTS, this is checked in udp_send_skb(). skb->len contains network and transport header len here, we should use only data len instead. This is the ipv6 counterpart to the below referenced commit, which missed the ipv6 change Fixes: 158390e45612 ("udp: using datalen to cap max gso segments") Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: bridge: fix ioctl old_deviceless bridge argumentRemi Pommarel1-1/+1
Commit 561d8352818f ("bridge: use ndo_siocdevprivate") changed the source and destination arguments of copy_{to,from}_user in bridge's old_deviceless() from args[1] to uarg breaking SIOC{G,S}IFBR ioctls. Commit cbd7ad29a507 ("net: bridge: fix ioctl old_deviceless bridge argument") fixed only BRCTL_{ADD,DEL}_BRIDGES commands leaving BRCTL_GET_BRIDGES one untouched. The fixes BRCTL_GET_BRIDGES as well and has been tested with busybox's brctl. Example of broken brctl: $ brctl show bridge name bridge id STP enabled interfaces brctl: can't get bridge name for index 0: No such device or address Example of fixed brctl: $ brctl show bridge name bridge id STP enabled interfaces br0 8000.000000000000 no Fixes: 561d8352818f ("bridge: use ndo_siocdevprivate") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/all/20211223153139.7661-2-repk@triplefau.lt/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-23net: dsa: tag_ocelot: use traffic class to map priority on injected headerXiaoliang Yang1-1/+5
For Ocelot switches, the CPU injected frames have an injection header where it can specify the QoS class of the packet and the DSA tag, now it uses the SKB priority to set that. If a traffic class to priority mapping is configured on the netdevice (with mqprio for example ...), it won't be considered for CPU injected headers. This patch make the QoS class aligned to the priority to traffic class mapping if it exists. Fixes: 8dce89aa5f32 ("net: dsa: ocelot: add tagger for Ocelot/Felix switches") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Marouen Ghodhbane <marouen.ghodhbane@nxp.com> Link: https://lore.kernel.org/r/20211223072211.33130-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20inet: fully convert sk->sk_rx_dst to RCU rulesEric Dumazet7-17/+22
syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340 ip_route_input_rcu net/ipv4/route.c:2470 [inline] ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Freed by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749 slab_free mm/slub.c:3513 [inline] kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2506 [inline] rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:2985 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065 dst_release net/core/dst.c:177 [inline] dst_release+0x79/0xe0 net/core/dst.c:167 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2768 release_sock+0x54/0x1b0 net/core/sock.c:3300 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x289/0x3c0 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write+0x429/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807f1cb700 which belongs to the cache ip_dst_cache of size 176 The buggy address is located 58 bytes inside of 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0) The buggy address belongs to the page: page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 alloc_slab_page mm/slub.c:1793 [inline] allocate_slab mm/slub.c:1930 [inline] new_slab+0x32d/0x4a0 mm/slub.c:1993 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 slab_alloc_node mm/slub.c:3200 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 __mkroute_output net/ipv4/route.c:2564 [inline] ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850 ip_route_output_key include/net/route.h:142 [inline] geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809 geneve_xmit_skb drivers/net/geneve.c:899 [inline] geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082 __netdev_start_xmit include/linux/netdevice.h:4994 [inline] netdev_start_xmit include/linux/netdevice.h:5008 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline] mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211220143330.680945-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20phonet/pep: refuse to enable an unbound pipeRémi Denis-Courmont1-0/+2
This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object. Reported-by: syzbot+2dc91e7fc3dea88b1e8a@syzkaller.appspotmail.com Signed-off-by: Rémi Denis-Courmont <remi@remlab.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20mac80211: fix locking in ieee80211_start_ap error pathJohannes Berg1-0/+3
We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it. Cc: stable@vger.kernel.org Fixes: 295b02c4be74 ("mac80211: Add FILS discovery support") Reported-and-tested-by: syzbot+11c342e5e30e9539cabd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211220090836.cee3d59a1915.I36bba9b79dc2ff4d57c3c7aa30dff9a003fe8c5c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18ax25: NPD bug when detaching AX25 deviceLin Ma1-1/+3
The existing cleanup routine implementation is not well synchronized with the syscall routine. When a device is detaching, below race could occur. static int ax25_sendmsg(...) { ... lock_sock() ax25 = sk_to_ax25(sk); if (ax25->ax25_dev == NULL) // CHECK ... ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE ... } static void ax25_kill_by_device(...) { ... if (s->ax25_dev == ax25_dev) { s->ax25_dev = NULL; ... } Other syscall functions like ax25_getsockopt, ax25_getname, ax25_info_show also suffer from similar races. To fix them, this patch introduce lock_sock() into ax25_kill_by_device in order to guarantee that the nullify action in cleanup routine cannot proceed when another socket request is pending. Signed-off-by: Hanjie Wu <nagi@zju.edu.cn> Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-17Revert "tipc: use consistent GFP flags"Hoang Le1-4/+4
This reverts commit 86c3a3e964d910a62eeb277d60b2a60ebefa9feb. The tipc_aead_init() function can be calling from an interrupt routine. This allocation might sleep with GFP_KERNEL flag, hence the following BUG is reported. [ 17.657509] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:230 [ 17.660916] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3 [ 17.664093] preempt_count: 302, expected: 0 [ 17.665619] RCU nest depth: 2, expected: 0 [ 17.667163] Preemption disabled at: [ 17.667165] [<0000000000000000>] 0x0 [ 17.669753] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 5.16.0-rc4+ #1 [ 17.673006] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 17.675540] Call Trace: [ 17.676285] <IRQ> [ 17.676913] dump_stack_lvl+0x34/0x44 [ 17.678033] __might_resched.cold+0xd6/0x10f [ 17.679311] kmem_cache_alloc_trace+0x14d/0x220 [ 17.680663] tipc_crypto_start+0x4a/0x2b0 [tipc] [ 17.682146] ? kmem_cache_alloc_trace+0xd3/0x220 [ 17.683545] tipc_node_create+0x2f0/0x790 [tipc] [ 17.684956] tipc_node_check_dest+0x72/0x680 [tipc] [ 17.686706] ? ___cache_free+0x31/0x350 [ 17.688008] ? skb_release_data+0x128/0x140 [ 17.689431] tipc_disc_rcv+0x479/0x510 [tipc] [ 17.690904] tipc_rcv+0x71c/0x730 [tipc] [ 17.692219] ? __netif_receive_skb_core+0xb7/0xf60 [ 17.693856] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 17.695333] __netif_receive_skb_list_core+0x20b/0x260 [ 17.697072] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 17.698870] ? dev_gro_receive+0x4c2/0x680 [ 17.700255] napi_complete_done+0x6f/0x180 [ 17.701657] virtnet_poll+0x29c/0x42e [virtio_net] [ 17.703262] __napi_poll+0x2c/0x170 [ 17.704429] net_rx_action+0x22f/0x280 [ 17.705706] __do_softirq+0xfd/0x30a [ 17.706921] common_interrupt+0xa4/0xc0 [ 17.708206] </IRQ> [ 17.708922] <TASK> [ 17.709651] asm_common_interrupt+0x1e/0x40 [ 17.711078] RIP: 0010:default_idle+0x18/0x20 Fixes: 86c3a3e964d9 ("tipc: use consistent GFP flags") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20211217030059.5947-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net: openvswitch: Fix matching zone id for invalid conns arriving from tcPaul Blakey2-1/+8
Zone id is not restored if we passed ct and ct rejected the connection, as there is no ct info on the skb. Save the zone from tc skb cb to tc skb extension and pass it on to ovs, use that info to restore the zone id for invalid connections. Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net/sched: flow_dissector: Fix matching on zone id for invalid connsPaul Blakey3-2/+5
If ct rejects a flow, it removes the conntrack info from the skb. act_ct sets the post_ct variable so the dissector will see this case as an +tracked +invalid state, but the zone id is lost with the conntrack info. To restore the zone id on such cases, set the last executed zone, via the tc control block, when passing ct, and read it back in the dissector if there is no ct info on the skb (invalid connection). Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17net/sched: Extend qdisc control block with tc control blockPaul Blakey5-15/+19
BPF layer extends the qdisc control block via struct bpf_skb_data_end and because of that there is no more room to add variables to the qdisc layer control block without going over the skb->cb size. Extend the qdisc control block with a tc control block, and move all tc related variables to there as a pre-step for extending the tc control block with additional members. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17Revert "xsk: Do not sleep in poll() when need_wakeup set"Magnus Karlsson1-2/+2
This reverts commit bd0687c18e635b63233dc87f38058cd728802ab4. This patch causes a Tx only workload to go to sleep even when it does not have to, leading to misserable performance in skb mode. It fixed one rare problem but created a much worse one, so this need to be reverted while I try to craft a proper solution to the original problem. Fixes: bd0687c18e63 ("xsk: Do not sleep in poll() when need_wakeup set") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211217145646.26449-1-magnus.karlsson@gmail.com
2021-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller4-6/+9
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix UAF in set catch-all element, from Eric Dumazet. 2) Fix MAC mangling for multicast/loopback traffic in nfnetlink_queue and nfnetlink_log, from Ignacy Gawędzki. 3) Remove expired entries from ctnetlink dump path regardless the tuple direction, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge tag 'net-5.16-rc6' of ↵Linus Torvalds24-56/+113
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from mac80211, wifi, bpf. Relatively large batches of fixes from BPF and the WiFi stack, calm in general networking. Current release - regressions: - dpaa2-eth: fix buffer overrun when reporting ethtool statistics Current release - new code bugs: - bpf: fix incorrect state pruning for <8B spill/fill - iavf: - add missing unlocks in iavf_watchdog_task() - do not override the adapter state in the watchdog task (again) - mlxsw: spectrum_router: consolidate MAC profiles when possible Previous releases - regressions: - mac80211 fixes: - rate control, avoid driver crash for retransmitted frames - regression in SSN handling of addba tx - a memory leak where sta_info is not freed - marking TX-during-stop for TX in in_reconfig, prevent stall - cfg80211: acquire wiphy mutex on regulatory work - wifi drivers: fix build regressions and LED config dependency - virtio_net: fix rx_drops stat for small pkts - dsa: mv88e6xxx: unforce speed & duplex in mac_link_down() Previous releases - always broken: - bpf fixes: - kernel address leakage in atomic fetch - kernel address leakage in atomic cmpxchg's r0 aux reg - signed bounds propagation after mov32 - extable fixup offset - extable address check - mac80211: - fix the size used for building probe request - send ADDBA requests using the tid/queue of the aggregation session - agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid deadlocks - validate extended element ID is present - mptcp: - never allow the PM to close a listener subflow (null-defer) - clear 'kern' flag from fallback sockets, prevent crash - fix deadlock in __mptcp_push_pending() - inet_diag: fix kernel-infoleak for UDP sockets - xsk: do not sleep in poll() when need_wakeup set - smc: avoid very long waits in smc_release() - sch_ets: don't remove idle classes from the round-robin list - netdevsim: - zero-initialize memory for bpf map's value, prevent info leak - don't let user space overwrite read only (max) ethtool parms - ixgbe: set X550 MDIO speed before talking to PHY - stmmac: - fix null-deref in flower deletion w/ VLAN prio Rx steering - dwmac-rk: fix oob read in rk_gmac_setup - ice: time stamping fixes - systemport: add global locking for descriptor life cycle" * tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits) bpf, selftests: Fix racing issue in btf_skc_cls_ingress test selftest/bpf: Add a test that reads various addresses. bpf: Fix extable address check. bpf: Fix extable fixup offset. bpf, selftests: Add test case trying to taint map value pointer bpf: Make 32->64 bounds propagation slightly more robust bpf: Fix signed bounds propagation after mov32 sit: do not call ipip6_dev_free() from sit_init_net() net: systemport: Add global locking for descriptor lifecycle net/smc: Prevent smc_release() from long blocking net: Fix double 0x prefix print in SKB dump virtio_net: fix rx_drops stat for small pkts dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED sfc_ef100: potential dereference of null pointer net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup net: usb: lan78xx: add Allied Telesis AT29M2-AF net/packet: rx_owner_map depends on pg_vec netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc dpaa2-eth: fix ethtool statistics ixgbe: set X550 MDIO speed before talking to PHY ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 18:00:55 +0000